betaFeedback

WorksPhysics and Astronomy

The vertical-velocity skewness in the inertial sublayer of turbulent wall flows

Abstract

We provide empirical evidence that within the inertial sub layer of adiabatic turbulent flows over smooth walls, the skewness of the vertical velocity component SkwSk_w displays universal behaviour, being constant and constrained within the range Skw≈0.1−0.16Sk_w \approx 0.1-0.16, regardless of flow configuration and Reynolds number. A theoretical model is proposed to explain the observed behaviour, including the observed range of variations of SkwSk_w. The model clarifies why SkwSk_w cannot be predicted from down-gradient closure approximations routinely employed in meteorological and climate models whereby SkwSk_w impacts cloud formation and dispersion processes. The model also offers an alternative and implementable approach.

Introduction

Much of the effort devoted to the study of adiabatic and hydrodynamically smooth wall turbulence has focused on the characterization of velocity statistics within the so-called logarithmic or inertial sublayer (ISL). The Attached Eddy Model (AEM), which is probably the most cited model for ISL-turbulence, predicts that first and second order velocity statistics can be described as [1, 2, 3]:

uˉ+=1κlog⁡(z+)+A;σu2+=Au−Bulog⁡(zδ)(1)\bar{u}^{+} = \frac{1}{\kappa}\log\left(z^{+}\right) + A; \quad\sigma_{u}^{2+} = A_{u} - B_{u}\log\left(\frac{z}{\delta}\right) \tag*{(1)}

and, a less studied outcome, σw2+=Aw2\sigma_{w}^{2+} = A_{w}^{2}, where uu and ww are the longitudinal and wall-normal velocity component, respectively; zz is the wall normal coordinate; σu=u′2‾\sigma_u = \sqrt{\overline{u^{\prime2}}} and σw=w′2‾\sigma_w = \sqrt{\overline{w^{\prime2}}} are the standard deviation of uu and ww respectively; primes identify fluctuations due to turbulence around the mean; the overline represents averaging over coordinates of statistical homogeneity; the plus index indicates classical inner scaling whereby velocities and lengths are normalized with the friction velocity u∗u_* and viscous length scale ν/u∗\nu/u_*, respectively, with ν\nu being the kinematic viscosity of the fluid; δ\delta is the outer length scale of the flow; κ\kappa, AA, AuA_u, AwA_w, BuB_u are coefficients that are thought to attain asymptotic constant values at very large Reynolds numbers Reτ=u∗δ/νRe_\tau= u_*\delta/\nu [2, 4, 5]. The AEM has been extended to velocity moments of any order as well as cross-correlations between different velocity components thereby providing an expanded picture of ISL flow statistics [6]. However, convincing empirical support for the aforementioned theoretical predictions is limited

to the statistics of uu [2, 4, 7, 8, 9]. In contrast, the statistics of ww have been much less reported and investigated, partly because of the technical difficulties associated with accurately measuring ww in the near wall region of laboratory flows at high ReτRe_\tau. As a result, theoretical predictions of ww-statistics have received mixed support from the literature [10, 11, 12] and higher order moments of w′w' are rarely reported but with few notable exceptions [13, 14, 15, 16, 17]. We argue that this overlook contributed to hide a universal property of ISL turbulence, which is herein reported and discussed. The aim of this letter is to demonstrate that the skewness of w′w', Skw=w′3‾/σw3Sk_w = \overline{w^{\prime3}}/\sigma_w^3, is constant (i.e. zz–independent) and robust to variations in ReτRe_\tau within the ISL. Moreover, a theoretical model that explains this observed behaviour and links SkwSk_w to established turbulence constants is proposed, leading to satisfactory predictions. Finally, we note that the asymmetry in the probability density function of w′w', as quantified by SkwSk_w, cannot be accounted for with gradient-diffusion representations routinely employed in meteorological and climate models [18]. Rectifying this limitation is of significance because SkwSk_w was shown to impact cloud formation [19, 20, 21] and dispersion processes [22, 23] [24, 25].

Figure 1 reports the variations of SkwSk_w with normalized wall-normal distance (z/δ)(z/\delta) using data from Direct Numerical Simulations (DNS) [26] and laboratory experiments [17] pertaining to flat plate turbulent boundary layers (TBLs). Data from experiments on uniform [27] and weakly non-uniform turbulent open channel flows [15, 16], whereby accurate measurements of ww are available are also included. This data set follows within the low to medium range of ReτRe_\tau (Table I). A reference value of Skw=0.1Sk_w = 0.1 is added to the figure as often reported for atmospheric surface layers in adiabatic conditions across multiple heights and surface cover [28]. This value is representative of flows at extremely high ReτRe_\tau. A region of constant SkwSk_w weakly varying between 0.1 and 0.16 (here weakly means that variations are much smaller than those displayed by SkwSk_w over the entire flow domain) is evident in all profiles within the range 2.6Reτν/u∗2.6\sqrt{Re_\tau}\nu/u_\ast up to 0.150.15–0.25δ0.25\delta, which is often associated with the ISL [11] [29, 30]. This finding is remarkable given the large differences in ReτRe_\tau, measurement techniques and experimental facilities used. In what follows, a theoretical model that predicts and explains such a behaviour is provided.

Theory

To explain the observed behaviour of SkwSk_w, a stationary and planar homogeneous incompressible flow in the absence of subsidence is considered for w′3‾\overline{w'^3}. For these conditions, the model can be derived from the Reynolds averaged Navier-Stokes equations and is given as [31, 32]

∂w′3‾∂t=0=+3σw2∂σw2∂z−∂w′w′3‾∂z−3(w′w′‾∂p′∂z)−2ν(3w′w′‾∂w′∂z∂w′∂z)(2)\frac{\partial\overline{w'^3}}{\partial t}=0=+3\sigma_w^2\frac{\partial\sigma_w^2}{\partial z}-\frac{\partial\overline{w'w'^3}}{\partial z}-3\left(\overline{w'w'}\frac{\partial p'}{\partial z}\right)-2\nu\left(3\overline{w'w'}\frac{\partial w'}{\partial z}\frac{\partial w'}{\partial z}\right) \tag*{(2)}

where tt is time and p′p' is the pressure deviation from the mean or hydrostatic state normalized by a constant fluid density ρ\rho.

The first two terms on the right-hand side of equation 2 arise from inertial effects or convective acceleration, the third and fourth terms arise due to interactions between w′w′w'w' and the forces acting on a fluid element (p′/ρp'/\rho and viscous stresses). A quasi-normal approximation for the fourth moment is used [33] so that FFw=w′4‾/(σw)4=3+aF F_w=\overline{w'^4}/(\sigma_w)^4=3+a and the overall inertial term simplifies to

−∂w′4‾∂z+3σw2∂σw2∂z=−(3+2a)σw2∂σw2∂z(3)-\frac{\partial\overline{w'^4}}{\partial z}+3\sigma_w^2\frac{\partial\sigma_w^2}{\partial z}=-(3+2a)\sigma_w^2\frac{\partial\sigma_w^2}{\partial z} \tag*{(3)}

where a≠0a\ne0 allows for deviations from Gaussian tails (a=0a=0 recovers a Gaussian flatness factor). Usage of a quasi-Gaussian approximation to close a fourth (and even) moment budget makes no statement on the asymmetry (or odd moments) of the w′w' probability density function, only that large-scale intermittency is near-Gaussian, a finding well supported in the literature [34] and many phenomenological approaches [6]. Models for the pressure velocity and viscous destruction terms are now needed to integrate equation 2. A return to isotropy (or Rotta) model [35] given by

−2w′w′‾∂p′∂z=CRτ(q‾3−σw2)(4)-2\overline{w'w'}\frac{\partial p'}{\partial z}=\frac{C_R}{\tau}\left(\frac{\overline{q}}{3}-\sigma_w^2\right) \tag*{(4)}

may be used to derive an expression for the pressure-velocity destruction term in equation 2 where q=u′u′+v′v′+w′w′q=u'u'+v'v'+w'w' is twice the instantaneous turbulent kinetic energy, q‾=2K\overline{q}=2K, KK is the averaged turbulent kinetic

energy, v′v' is the lateral turbulent velocity, and CR=1.8C_R=1.8 is a well established constant, the Rotta constant [36]. The CRC_R relates the so-called relaxation time τ=q‾/ϵ‾\tau=\overline{q}/\overline{\epsilon} to the time it takes for isotropy to be attained at the finest scales, where ϵ‾\overline{\epsilon} is the mean turbulent kinetic energy dissipation rate. In deriving such an extension, the non-averaged form of equation 4 is first multiplied by (3/2)w′(3/2)w' and then averaged to yield

−3(w′w′‾∂p′∂z)=32CRτs(w′q‾3−w′w′w′‾)(5)-3\left(\overline{w'w'}\frac{\partial p'}{\partial z}\right)=\frac{3}{2}\frac{C_R}{\tau_s}\left(\frac{\overline{w'q}}{3}-\overline{w'w'w'}\right) \tag*{(5)}

where τs\tau_s is another decorrelation time that can differ from τ\tau. The difference between τ\tau and τs\tau_s arises because when multiplying the instantaneous form of equation 4 by w′w' to arrive at the instantaneous form of equation (5), the correlation between qq and w′w' must be considered after averaging. While expected to be small relative to the pressure-velocity interaction term, the viscous destruction contribution is herein retained and represented as [32]

−2ν(3w′∂w′∂z∂w′∂z)‾=−2ϵ′w′‾=−c2w′q‾τs,(6)-2\nu\overline{\left(3w'\frac{\partial w'}{\partial z}\frac{\partial w'}{\partial z}\right)}=-2\overline{\epsilon'w'}=-c_{2}\frac{\overline{w'q}}{\tau_{s}}, \tag*{(6)}

where c2c_{2} is a similarity constant, and ϵ′∼q/τs\epsilon' \sim q/\tau_{s} is the fluctuating dissipation rate around ϵ‾\overline{\epsilon}. Inserting these approximations into equation (2) yields,

w′3‾=−23(3+2a)τsσw2CR∂σw2∂z+w′q‾(13−2c23CR).(7)\overline{w'^3}=-\frac{2}{3}\frac{(3+2a)\tau_{s}\sigma_{w}^{2}}{C_{R}}\frac{\partial\sigma_{w}^{2}}{\partial z}+\overline{w'q}\left(\frac{1}{3}-\frac{2c_{2}}{3C_{R}}\right). \tag*{(7)}

A model for w′q‾\overline{w'q} is further needed to infer SkwSk_{w}. To arrive at this model, the KK budget for the same flow conditions leading to equation (2) are employed. When mechanical production is balanced by ϵ‾\overline{\epsilon} as common to the ISL, the KK budget leads to two outcomes [37]

u∗2∂U‾∂z−ϵ‾=0;−12∂w′q‾∂z=0.(8)u_{*}^{2}\frac{\partial\overline{U}}{\partial z}-\overline{\epsilon}=0;\qquad-\frac{1}{2}\frac{\partial\overline{w'q}}{\partial z}=0. \tag*{(8)}

The height-independence of w′q‾\overline{w'q} is suggestive that it must be controlled by local conditions and a down-gradient approximation is justified given by [37]

−12w′q‾=κzu∗∂K∂z.(9)-\frac{1}{2}\overline{w'q}=\kappa z u_{*}\frac{\partial K}{\partial z}. \tag*{(9)}

The model in equation (9) has received experimental support even for rough-wall turbulent boundary layers and across a wide range of Reynolds numbers and surface roughness values [37].

SourceData setFlowReτRe_{\tau}BuB_{u}AwA_{w}SkwSk_{w}
Manes et al. [15]MNOC21600.581.060.11
Sillero et al. [26]DNS*13070.851.150.13
Sillero et al. [26]20000.861.170.12
Heisel et al. [17]HL1WT38000.850.960.21
Heisel et al. [17]HL2WT47000.631.000.15
Poggi et al. [27]PG1OC12320.730.900.23
Poggi et al. [27]PG2OC10710.781.020.17
Poggi et al. [27]PG3OC8451.030.900.33
Peruzzi et al. [16]PR1OC22400.781.120.13
Peruzzi et al. [16]PR2OC9990.631.060.12
Peruzzi et al. [16]PR3OC18860.851.060.16

Table 1. Overview of smooth-wall boundary layer experiments (OC = open channel/flumes, WT = wind tunnel) and direct numerical simulation* in Figure 1. The Reτ=δu∗/νRe_{\tau}=\delta u_{*}/\nu is the friction Reynolds number, BuB_{u} and AwA_{w} were computed from data using AEM. For the DNS, the highest and lowest ReτRe_{\tau} are shown given the small variability in BuB_{u} (0.91-0.94) and AwA_{w} (1.15-1.17). The computed SkwSk_{w} using equation (11) is also presented.

roughness values [37]. Noting that K≈σu2K\approx\sigma_{u}^{2} yields

w′3‾=−23[Kt,w∂σw2∂z+Kt,u∂σu2∂z];(10)\overline{w'^3}=-\frac{2}{3}\left[K_{t,w}\frac{\partial\sigma_{w}^{2}}{\partial z}+K_{t,u}\frac{\partial\sigma_{u}^{2}}{\partial z}\right]; \tag*{(10)}
Kt,w=(3+2a)τsσw2CR,Kt,u=κzu∗(1−2c2CR),K_{t,w}=\frac{(3+2a)\tau_{s}\sigma_{w}^{2}}{C_{R}},\qquad K_{t,u}=\kappa z u_{*}\left(1-\frac{2c_{2}}{C_{R}}\right),

where Kt,wK_{t,w} and Kt,uK_{t,u} are eddy viscosity terms. These two eddy viscosity values become comparable in magnitude when setting τs=κz/u∗\tau_{s}=\kappa z/u_{*} (i.e. following classical ISL scaling) and CR=1.8C_{R}=1.8 - its accepted value [36] as expected in the ISL. To determine ∂σw2/∂z\partial\sigma_{w}^{2}/\partial z, the mean vertical velocity equation is considered for the same idealized flow conditions as equation (2). This consideration results in ∂σw2/∂z=−(1/ρ)(∂P/∂z)−g\partial\sigma_{w}^{2}/\partial z=-(1/\rho)(\partial P/\partial z)-g, where gg is the gravitational acceleration. When P‾=−ρgz\overline{P}=-\rho gz (i.e. hydrostatic), ∂σw2/∂z=0\partial\sigma_{w}^{2}/\partial z=0 or AwA_{w} is constant in zz within the ISL. That is, the AEM requires PP to be hydrostatic. However, the AEM precludes a ∂σw2/∂z=0\partial\sigma_{w}^{2}/\partial z=0 in the ISL. In fact, the AEM predicts a ∂σu2/∂z=−u∗2Bu/z\partial\sigma_{u}^{2}/\partial z=-u_{*}^{2}B_{u}/z when the ReτRe_{\tau} is very large as expected in the ISL of an adiabatic atmosphere. Inserting this estimate into equation (10), setting u∗=σu/Awu_{*}=\sigma_{u}/A_{w}, and momentarily ignoring ∂σu2/∂z\partial\sigma_{u}^{2}/\partial z relative to ∂σu2/∂z\partial\sigma_{u}^{2}/\partial z as a simplification consistent with the AEM, leads to

Skw=w′3‾σw3=23(1−2c2CR)κBuAw3.(11)Sk_{w}=\frac{\overline{w'^3}}{\sigma_{w}^{3}}=\frac{2}{3}\left(1-\frac{2c_{2}}{C_{R}}\right)\frac{\kappa B_{u}}{A_{w}^{3}}. \tag*{(11)}

This equation is the sought outcome. The term 2c2/CR2c_{2}/C_{R} reflects the relative importance of the pressure-velocity to viscous destruction terms. Pressure-velocity destruction effects are far more efficient than viscous effects supporting the argument that 2c2/CR≪12c_{2}/C_{R}\ll1 at very high ReτRe_{\tau} [38] such as the atmosphere. This implies that the numerical value of SkwSk_{w}, as obtained from equation (11), depends on three well established phenomenological constants, namely κ\kappa, AwA_{w}, and BuB_{u} [3, 8, 9], which, in turn, may depend weakly on ReτRe_{\tau} and the flow type. Equation (11) is also insensitive to the choices made for τs\tau_{s}, because the AEM requires ∂σw2/∂z=0\partial\sigma_{w}^{2}/\partial z=0.

Discussion and Conclusion

Equation (11) demonstrates two inter-related aspects about SkwSk_{w} in the ISL: (i) why SkwSk_{w} is positive and constant with zz, and (ii) why conventional gradient diffusion approximations fail to predict w′3‾\overline{w'^3} from ∂σw2/∂z\partial\sigma_{w}^{2}/\partial z. Regarding the first, equation (11) predicts that Skw>0Sk_{w}>0 consistent with the paradigm that ejective eddy motions (w′>0,u′<0w'>0,u'<0) are more significant in momentum transfer than sweeping motions (w′<0,u′>0w'<0,u'>0) within the ISL. This assertion is supported by numerous experiments [17] [39, 40] and adds further confidence in the physics associated with the derivation of equation (11). Moreover, values of the constants in equation (11) for flat plate turbulent boundary layers (TBL) at Reτ→∞Re_\tau\to\infty correspond to κ=0.39\kappa= 0.39, Aw=1.33A_w = 1.33, and Bu=1.26B_u = 1.26 [2, 9]. Upon further setting c2=0.1c_2 = 0.1 and CR=1.8C_R = 1.8 (conventional values), leads to Skw=0.12Skw = 0.12. This estimate compares well with Skw=0.1Skw = 0.1 reported for the ISL in the adiabatic atmosphere [28, 41]. At the low to moderate ReτRe_\tau pertaining to the experiments and DNS associated with Figure 1, equation 11 cannot be used to estimate SkwSkw using asymptotic values of AwA_w and BuB_u. However, Figure 1 shows that these flows attain similar (i.e. slightly higher) and reasonably zz-independent values of SkwSkw. To explain this behaviour, the DNS data are used as they allow exploring theoretical predictions offered by equation 10 with reliable estimations of σw2\sigma_w^2 and σu2\sigma_u^2 vertical gradients. Figure 2 indicates that, for most of the ISL, the first term on the right hand side of the equation is an order of magnitude smaller than the second and can be discarded as predicted by the AEM and advocated in the proposed theory. Predictions of SkwSkw obtained from the second term are excellent in the ISL and resemble the observed zz-independent behaviour. Besides providing further confidence on the proposed theory, this result indicates that, since Kt,uK_{t,u} is directly proportional to zz, ∂σu2/∂z\partial\sigma_u^2/\partial z must overall scale as ∼1/z\sim1/z, as predicted by the AEM. Hence, we argue that the AEM represents a reasonable approximation provided BuB_u and AwA_w are adjusted to accommodate for low ReτRe_\tau effects. As shown in Figure 3, this is the case for both DNS and laboratory data.

Variation of the vertical velocity skewness with normalized wall-normal distance

Figure 1. Variation of the vertical velocity skewness SkwSk_w with normalized wall-normal distance z/δz/\delta. The dashed line is Skw=0.16Sk_w=0.16 and the dotted line is Skw=0.10Sk_w=0.10. Data sources and references are summarized in Table I. Red symbols and lines identify the ISL range. For HL1 and HL2, near wall data are not reported due to issues with velocity measurements associated with an excessive sampling volume of the x-probe employed in the experiments [17].

Image not extracted

Figure 2. Panel a): Variation of the vertical velocity skewness SkwSkw with normalized wall-normal distance z/δz/\delta from DNS [26]; panel b): Skw,mSkw,m is the modelled vertical velocity skewness using the first term (blue line) and second term (black line) on the right hand side of equation 10 both scaled with σw\sigma_w. In both panels, red lines identify the ISL range. The dashed line is Skw=0.16Skw = 0.16 and the dotted line is Skw=0.10Skw = 0.10

Image not extracted

Figure 3. Panel a): difference between σu2+\sigma_u^{2+} and estimations obtained from the AEM, σu,m2+=Au−Bulog⁡(z/δ)\sigma_{u,m}^{2+} = A_u-B_u\log(z/\delta) using values of AuA_u and BuB_u obtained from regression of data within the ISL range (identified by red symbols and lines); panel b): non dimensional vertical velocity variance σw2/Aw2\sigma_w^2/A_w^2 normalized with AwA_w obtained from data fitting within the ISL vs wall-normal distance z/δz/\delta. Data sources and references are summarized in Table I.

For the DNS, appropriate values of Aw(=1.15A_w(=1.15-1.17)1.17) and Bu(=0.85B_u(=0.85-0.86)0.86) were estimated by fitting the AEM to the available data for all available ReτRe_\tau. The constant

κ=0.39\kappa=0.39 was assumed as reported in the literature [4, 16]. When inserting these choices of AwA_w and BuB_u from the DNS into equation 11, the predicted Skw=0.13Skw = 0.13, which is close to reported values in Figure 1c. The same approach was used for all laboratory studies. When combining all the runs together (wind tunnel and open channel experiments), ensemble-averaged Aw=1.01±0.074A_w = 1.01 \pm0.074 and the ensemble-averaged Bu=0.76±0.14B_u = 0.76 \pm0.14 were obtained across runs within an experiment and across experiments. These values result in an ensemble-averaged Skw=0.18±0.07Skw = 0.18 \pm0.07 and agrees with the measurements reported in Figure 1.

This analysis and Figure 1 suggest that SkwSkw for DNS and experiments is higher than 0.12, as estimated for Reτ→∞Re_\tau\to\infty. This is probably because of deviations in the ISL variance statistics from their asymptotic constants in Equation 1. The effects of such deviations on SkwSkw are however modest because, while low-ReτRe_\tau flows are characterized by values of AwA_w and BuB_u that are significantly lower than their counterparts at Reτ→∞Re_\tau\to\infty (i.e. Aw=1.33A_w = 1.33, and Bu=1.26B_u = 1.26, see Table I), equation 11 indicates that SkwSkw is dictated by the ratio Bu/Aw3B_u/A_w^3, and hence the effect of such deviations are in good part compensated.

Regarding the second feature, equation 10 offers an explanation as to why conventional down-gradient closure models with eddy viscosity Kt∝qlmK_t \propto ql_m (lml_m is a ‘master’ mixing length) expressed in general index notation ([x1,x2,x3]=[x,y,z][x_1,x_2,x_3] = [x,y,z] and [u1′,u2′,u3′]=[u′,v′,w′][u'_1,u'_2,u'_3] = [u',v',w']) as

ui′uj′uk′‾=−Kt[∂ui′uj′‾∂xk+∂uj′uk′‾∂xi+∂uj′uk′‾∂xi](12)\overline{u'_i u'_j u'_k} = -K_t \left[\frac{\partial\overline{u'_i u'_j}}{\partial x_k} + \frac{\partial\overline{u'_j u'_k}}{\partial x_i} + \frac{\partial\overline{u'_j u'_k}}{\partial x_i}\right] \tag*{(12)}

spectacularly fail when i=j=k=3i=j=k=3 and when AwA_w is approximately constant in the ISL (as in the AEM). Yet, the derived equation here also offers a rectification based on the AEM. This rectification accommodates the role of finite ∂σu2/∂z\partial\sigma_u^2/\partial z on w′3w'^3 that cannot arise from equation (12). While studies of the failure of gradient-diffusion models have a long tradition in turbulence research [43], the mode of failure these studies identify differ from the standard one offered here. The classical failure of the so-called gradient diffusion phenomenology is the lack of accommodation of flux transport terms [43, 44]. The origin of the failure of equation (12) here is attributed to a return-to-isotropy mechanism (i.e. pressure-velocity destruction) that requires a model for the vertical transport of KK, which is dominated by σu2\sigma_u^2 [37].

To be clear, equation (2) does maintain the turbulent flux transport term of w′3w'^3 through ∂w′4‾/∂z\partial\overline{w'^4}/\partial z, which is modeled using a quasi-normal approximation. However, this term is not the main reason why equation (12) fails. In fact, the final SkwSk_w expression is independent of aa when AwA_w is constant (as in AEM) irrespective of whether a=0a=0 or not. What was earlier assumed was aa not vary appreciably with zz within the ISL.

In conclusion, this letter demonstrates that, within the ISL of turbulent and adiabatic smooth wall flows, SkwSk_w attain zz-independent values that are predictable from well known turbulence constants relating to the AEM. This behavior is reported for a variety of different wall flows and is independent of variations in ReτRe_\tau, hence universal and robust.

References

Acknowledgments

EB acknowledges Politecnico di Torino (Italy) for supporting the visit to Duke University. (GK acknowledges support from the U.S. National Science Foundation (NSF-AGS-2028633) and the U.S. Department of Energy (DE-SC0022072). DV and CM acknowledge European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 101022685 (SHEEILD). DP acknowledges support from Fondo europeo di sviluppo regionale (FESR) for project Bacini Ecologicamente sostenibili e sicuri, concepiti per l’adattamento ai Cambiamenti ClimAtici (BECCA) in the context of Alpi Latine COOperazione TRAnsfrontaliera (ALCOTRA) and project Nord Ovest Digitale e Sostenibile - Digital innovation toward sustainable mountain (Nodes - 4).

References

  1. [1]A. Townsend, The Structure of Turbulent Shear Flow (Cambridge University Press, 1976).
  2. [2]A. J. Smits, B. J. McKeon, and I. Marusic, High-Reynolds number wall turbulence, Annual Review of Fluid Mechanics 43, 2011.DOI
  3. [3]I. Marusic and J. P. Monty, Attached eddy model of wall turbulence, Annual Review of Fluid Mechanics 51, 49 (2019).DOI
  4. [4]I. Marusic, J. P. Monty, M. Hultmark, and A. J. Smits, On the logarithmic region in wall turbulence, Journal of Fluid Mechanics 716, R3 (2013).DOI
  5. [5]R. J. Stevens, M. Wilczek, and C. Meneveau, Large-eddy simulation study of the logarithmic law for second-and higher-order moments in turbulent wall-bounded flow, Journal of Fluid Mechanics 757, 888 (2014).
  6. [6]J. Woodcock and I. Marusic, The statistical behaviour of attached eddies, Physics of Fluids 27 (2015).DOI
  7. [7]C. Meneveau and I. Marusic, Generalized logarithmic law for high-order moments in turbulent boundary layers, Journal of Fluid Mechanics 719, R1 (2013).DOI
  8. [8]T. Banerjee and G. G. Katul, Logarithmic scaling in the longitudinal velocity variance explained by a spectral budget, Physics of Fluids 25, 125106 (2013).
  9. [9]K. Y. Huang and G. G. Katul, Profiles of high-order moments of longitudinal velocity explained by the random sweeping decorrelation hypothesis, Physical Review Fluids 7, 044603 (2022).
  10. [10]C. Morrill-Winter, J. Klewicki, R. Baidya, and I. Marusic, Temporally optimized spanwise vorticity sensor measurements in turbulent boundary layers, Experiments in Fluids 56, 216 (2015).
  11. [11]R. Örlü, T. Fiorini, A. Segalini, G. Bellani, A. Talamelli, and P. H. Alfredsson, Reynolds stress scaling in pipe flow turbulence—first results from CICLoPE, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 375, 20160187 (2017).
  12. [12]R. Zhao and A. J. Smits, Scaling of the wall-normal turbulence component in high-Reynolds-number pipe flow, Journal of Fluid Mechanics 576, 457 (2007).
  13. [13]K. Flack, M. Schultz, and J. Connelly, Examination of a critical roughness height for outer layer similarity, Physics of Fluids 19 (2007).DOI
  14. [14]M. Schultz and K. Flack, The rough-wall turbulent boundary layer from the hydraulically smooth to the fully rough regime, Journal of Fluid Mechanics 580, 381 (2007).
  15. [15]C. Manes, D. Poggi, and L. Ridolfi, Turbulent boundary layers over permeable walls: scaling and near-wall structure, Journal of Fluid Mechanics 687, 141 (2011).
  16. [16]C. Peruzzi, D. Poggi, L. Ridolfi, and C. Manes, On the scaling of large-scale structures in smooth-bed turbulent open-channel flows, Journal of Fluid Mechanics 889, A1 (2020).
  17. [17]M. Heisel, G. G. Katul, M. Chamecki, and M. Guala, Velocity asymmetry and turbulent transport closure in smooth-and rough-wall boundary layers, Physical Review Fluids 5, 104605 (2020).
  18. [18]G. L. Mellor and T. Yamada, Development of a turbulence closure model for geophysical fluid problems, Reviews of Geophysics 20, 851 (1982).
  19. [19]P. Bogenschutz, A. Gettelman, H. Morrison, V. Larson, D. Schanen, N. Meyer, and C. Craig, Unified parameterization of the planetary boundary layer and shallow convection with a higher-order turbulence closure in the Community Atmosphere Model: Single-column experiments, Geoscientific Model Development 5, 1407 (2012).
  20. [20]M. Huang, H. Xiao, M. Wang, and J. D. Fast, Assessing CLUBB PDF closure assumptions for a continental shallow-to-deep convective transition case over multiple spatial scales, Journal of Advances in Modeling Earth Systems 12, e2020MS002145 (2020).
  21. [21]T. Li, M. Wang, G. Guo, B. Yang, Y. Xu, X. Han, and J. Sun, An updated CLUBB PDF closure scheme to improve low cloud simulation in CAM6, Journal of Advances in Modeling Earth Systems 14, e2022MS003127 (2022).
  22. [22]J. H. Bærentsen and R. Berkowicz, Monte Carlo simulation of plume dispersion in the convective boundary layer, Atmospheric Environment 18, 701 (1984).
  23. [23]A. K. Luhar and R. E. Britter, A random walk model

Paper details

vlnc:W_j3suk4mq
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents