WorksPhysics and Astronomy
Gravitational-Wave Microlensing as a Probe of Compact Object Population
Abstract
The abundance of compact objects ranging from stellar to intermediate masses () remains poorly constrained, particularly for populations such as primordial black holes and dark matter subhalos that emit little or no electromagnetic radiation. Gravitational-wave (GW) microlensing provides a complementary way to probe these populations through wave-optics effects imprinted on the GW signals, with implications for astrophysical and cosmological inference. We develop a hierarchical Bayesian framework to infer the population properties of microlenses from an ensemble of microlensed GW events, constraining the slope of the power-law lens mass function (), the lens number density (), and the fraction of dark matter in compact lenses (). Using simulated microlensed GW signals drawn from a realistic binary black hole population, we find that detected microlensed events are able to constrain both and , although a degeneracy between the two remains. For a low-mass-dominated lens population () with , a three-year observation at the O4 sensitivity yields detectable microlensed events and recovers the injected dark-matter fraction, , with a 90% credible interval of .
Introduction
The abundance and mass distribution of dark compact objects are difficult to determine as they may produce little or no electromagnetic (EM) emission [26]. Such objects may include astrophysical black holes [18, 40, 79] (The LIGO Scientific Collaboration et al. 2026), primordial black holes (PBHs) [27, 86, 62, 30], dark-matter (DM) clumps [93, 46, 21], and more exotic compact objects [42, 35, 85, 105, 20].
Gravitational microlensing provides a powerful way to probe such otherwise elusive populations that could constitute a fraction of DM [11, 53, 106, 81, 80, 8, 102, 19, 51, 82, 84, 61] (P. Mróz et al. 2019). Rather than requiring the lens to be directly observable, microlensing relies on the gravitational imprint of the lens on the source signal. The resulting lensing effect depends on the mass distribution of the lens, the relative geometry between the lens and source, and the evolution of this geometry due to their relative motion [87].
However, conventional EM microlensing has intrinsic limitations because photometric observations primarily constrain the Einstein-radius crossing timescale, which depends on a combination of the lens mass, lens-source geometry, and relative transverse velocity rather than determining these quantities individually [74]. Additional observables, such as microlensing parallax, finite-source effects, and astrometric deflections, can help break these degeneracies [56, 57, 47, 58] (J. H. An et al. 2002), but are available only for a limited subset of events. Moreover, photometric microlensing surveys are primarily sensitive to sufficiently bright and well-monitored sources, predominantly accessible in the nearby Universe, limiting the range of sources and lensing configurations that can be probed [55]. These limitations motivate complementary probes of compact dark objects.
Gravitational-wave (GW) microlensing provides such a complementary probe. Compact lenses can imprint wave-optics effects on GW signals, producing frequency-dependent diffraction and interference features ([43, 78, 95, 24, 68, 39, 67]). For ground-based GW detectors, these effects are particularly relevant for lens masses in the range –, depending on the GW frequency and lens–source geometry.
In this regime of wave optics, the lensing signature is encoded directly in the waveform rather than solely in the magnification of an EM source, providing information that is complementary to conventional photometric microlensing. Moreover, GWs can be observed from sources at cosmological distances and are unaffected by dust extinction, allowing compact lenses along distant lines of sight to be probed ([3]).
However, individual GW microlensing events provide only limited information, typically constraining only the detector-frame (redshifted) lens mass and leaving a degeneracy between the intrinsic lens mass and lens redshift ([1]). Recovering the underlying lens population, therefore, requires combining information from multiple detections. Hierarchical Bayesian inference offers a framework for doing this by jointly modeling the lens-mass and redshift distributions across an ensemble of events, thereby constraining the hyperparameters that govern the lens population (e.g., [54, 69]).
To date, no compelling evidence for GW lensing has been reported by the LIGO–Virgo–KAGRA (LVK) Collaboration ([63, 5, 7, 1]), although intense scrutiny has been given to the lensed candidate GW231123 ([92, 33, 32, 59, 101] (Q. Hu et al. 2026; M. H.-Y. Cheung et al. 2026)). In the absence of confirmed detections, existing studies have instead used GW observations to place constraints on the abundance of compact DM through the non-observation of lensing signatures ([17, 16]). A complementary question is then how much can be learned once a population of microlensed GW events becomes available? Although intermediate-mass black holes (IMBHs) and globular clusters are unlikely to produce GW microlensing ([100]), if compact objects are linked to the DM, future GW observatories are expected to detect such events in sufficient numbers, making population-level inference possible ([50, 99]).
In this Letter, we investigate the extent to which compact-lens populations can be recovered from GW microlensing observations. Using astrophysically motivated simulations of microlensed GW events, we perform hierarchical Bayesian inference to jointly constrain the lens-mass distribution and number density while accounting for selection effects. We then translate these constraints into measurements of the compact-lens abundance, expressed as their contribution to the DM density.
Throughout this work, we adopt the Planck15 cosmology ([10]) as our fiducial model.
Data Setup
Point-Mass Microlensing
When a propagating GW signal passes near a compact object with a Schwarzschild radius that is comparable to the GW wavelength, the waveform undergoes frequency-dependent amplification, a phenomenon referred to as GW microlensing. The waveform of a microlensed GW () in the frequency domain can be obtained by multiplying the amplification factor () by the corresponding unlensed GW waveform (}) ([95]):
where is the dimensionless frequency of the waveform. denotes the redshifted lens mass, with and the lens-frame mass and redshift, respectively, and is the dimensionless impact parameter. These parameters fully specify an isolated point-mass (PM) lens. The corresponding amplification factor is written analytically as follows ([78, 95]):
where is the confluent hypergeometric function and , where .
Simulated Microlensed GW Events
To simulate microlensed GW signals using Eqs. (1) and (2), we consider only binary black holes (BBHs), whose detection horizon for current ground-based detectors extends to the largest distances among compact-binary sources (The LIGO Scientific Collaboration et al. 2026). Assuming a 3-year observing period (), we draw source parameters from the GWTC-3 population models [6], fixing the hyperparameters to their posterior median values. Specifically, we adopt the PowerLaw+Peak model for the primary mass distribution and a Madau–Dickinson-like redshift distribution [72] over , yielding a total of BBHs (see Appendices § 7.§ 1 and § 7.§ 2). GW signals are then generated using the IMRPhenomXPHM-SpinTaylor waveform model [83, 41].
The resulting synthetic BBH population remains broadly consistent with the population properties inferred from the most recent GWTC-5 catalog, which retains the main features of the BBH mass distribution identified in earlier catalogs [6, 2] (The LIGO Scientific Collaboration et al. 2026). We further find that our results are largely insensitive to the choice between the GWTC-3 and GWTC-5 population models. Details of the adopted models and hyperparameters, together with the comparison between the GWTC-3 and GWTC-5 populations, are given in Appendix § 7.§ 3.
We draw microlens parameters based on a population described by two hyperparameters: (1) , the constant comoving number density of microlenses, and (2) , the mass-function slope. The intrinsic lens mass is distributed as:
motivated by stellar lenses following the initial mass function [31], of PBHs, for which a power-law mass function arises naturally from scale-invariant density fluctuations or the collapse of cosmic string loops [28, 66], and by compact objects observed by the LVK network (The LIGO Scientific Collaboration et al. 2026). We consider lens masses up to , above which lensing effects enter the geometrical-optics regime across the LVK frequency band.
Motivated by J. Gais et al. [54], which showed that an injected IMBH number density of yields a well-constrained posterior on the number density, we adopt this comoving number density. For the mass-function slope, we inject to explore two representative population scenarios.
The choice corresponds to a log-uniform mass distribution, providing an agnostic baseline model (see, for example, B. Carr et al. [29] for PBH formation via spectator-field perturbations during an early matter-dominated era). In contrast, describes a steeper distribution in which low-mass lenses dominate the population more strongly, representative of the general class of power-law PBH mass functions [28, 66]. Comparing these two cases allows us to assess how constraints on the underlying lens population depend on .
Since GW microlensing measurements constrain the detector-frame lens mass, , we draw directly rather than . The microlensing optical depth for a BBH at source redshift is derived in Appendix § 8. Combining this optical depth with the assumed distribution in Eq. (3), the probability that a BBH at is microlensed by a lens with can be written as:
where is the comoving volume, and , , and are the angular diameter distances from the observer to the lens, from the observer to the source, and from the lens to the source, respectively.
Using Eq. (4), we sample within the range . Note that the source and lens parameters are linked through , which determines the lens redshift and distribution. We then sample from the nearest-effective-lens distribution [54], which incorporates the geometric factor arising from the differential lensing area for a spatially uniform source population in the source plane. Restricting to the range 2, we adopt
where is the effective lens number density within the comoving volume out to , projected onto the sky, which is given by
where is the total number of lenses within the comoving volume out to , and is the mean squared angular Einstein radius averaged over the lens population according to their mass and redshift distributions.
For the and scenarios, the expected numbers of microlensing events given by Eq. (23) are and , respectively. Each microlensed event is then assigned a source parameter set and a corresponding set of lens parameters drawn from the distributions above.
Microlensing Detectability
Although the optical depth determines the expected number of microlensed GW events, only a subset of these events produces detectable wave-optics signatures in GW observations. The detectability of GW microlensing depends not only on the network SNR, , but also on the waveform mismatch between microlensed and unlensed signals, which quantifies the degree of waveform distortion induced by wave-optics effects.
Following J. M. Ezquiaga et al. [48], we adopt a fiducial distinguishability criterion based on the statistic , which is interpreted as a measure of how distinguishable a microlensed waveform is from its unlensed counterpart. In the limit of small waveform mismatches, can be approximated as:
where denotes the network-averaged mismatch computed from the individual detector signals. We impose the conventional GW detection threshold, , and require an additional distinguishability criterion to identify a detected signal as microlensed. Using Eq. (7), a fiducial mismatch threshold of at the detection threshold corresponds to (or ). Signals satisfying both criteria are therefore considered identifiable as microlensed.
Figure 1 shows the resulting values between the simulated microlensed waveforms and their corresponding unlensed counterparts for microlensed events that satisfy the SNR detection threshold , obtained over three years of simulated observations, as a function of and for both the and populations. In both cases, shows a decreasing trend with increasing , reflecting the progressive suppression of wave-optics distortions at larger . We estimate used in Eq. (21) based on the adopted threshold.
Figure 1. Distributions of between microlensed and intrinsic unlensed waveforms, for signals with , shown as a function of the intrinsic lens mass () and the ratio of lens to source redshifts (). The color scheme indicates the dimensionless impact parameter ().
In addition, a positive correlation between and is evident, as expected from the stronger and more distinguishable waveform distortions produced by more massive lenses. Since the population contains a larger fraction of high lenses than the steeper distribution, a correspondingly larger fraction of simulated events satisfy the final distinguishability criterion in the case. The minimum lens mass capable of producing detectable microlensing signatures is for , whereas detectable signals in the case can extend down to . Moreover, no clear correlation is observed between and . While the lensing probability is maximized for lenses located roughly midway between the source and observer due to geometric effects, the strength of observable wave-optics distortions depends more strongly on and .
It is important to note that some simulated microlensed signals may satisfy the distinguishability criterion while still failing the network SNR requirement (). Such events would not be initially detectable. We therefore retain only events satisfying both detectability and distinguishability criteria and classify them as detectable microlensed GW signals.
Population Inference
Selection of Microlensed Events
From the resulting detectable populations, containing 1727 and 291 events for and 2, respectively, we randomly select 200 events from each population for computationally tractable parameter estimation. Random sampling ensures that no additional selection is imposed beyond the detectability criterion.
We then inject these events into simulated data from the LIGO Livingston and Hanford detectors (E. Capote et al. [25]) and Virgo (F. Acernese et al. [9]), assuming the expected O4 sensitivities and Gaussian noise realizations (B. P. Abbott et al. [4]).
To estimate the parameters of microlensed waveforms, we adopt Gravelamps (M. Wright & M. Hendry [103]), which is based on bilby (G. Ashton et al. [13]) and dynesty (J. S. Speagle [94]). The pipeline yields posterior distributions for and , together with the Bayesian evidence for the microlensing hypothesis, . Performing a parameter estimation for the same signal under the unlensed hypothesis additionally yields the corresponding evidence , allowing the Bayes factor between microlensing and unlensed hypotheses, , to be evaluated. A microlensed signal is expected to favor the lensing hypothesis with . In realistic searches, confident microlensing detections would additionally require a robust false-positive probability (FPP) assessment based on a large population of unlensed background events. For simplicity, however, we adopt a pragmatic criterion and regard microlensed events with
and well-constrained posteriors for and as confidently identified microlensing events, yielding totals of 158 and 132 events for the and cases, respectively. Appendix § 9 compares the lens parameters of identified microlensed events with the underlying population models, illustrating how detectable lens properties depend on the population parameters.
Hierarchical Bayesian Framework
Given the set of detected microlensing events (), the posterior of the hyperparameters () is obtained through hierarchical Bayesian inference:
where is the number of detected microlensed events and indicates the detection efficiency for a given hyperparameter set, corresponding to a selection-bias correction (I. Mandel et al. [73]; W. M. Farr [52]). The hyperparameter set consists of source-population, cosmological, and lens-population parameters, denoted by . Here, describes the BBH population as introduced in Eqs. (16)–(20), while denotes the cosmological parameters, such as the Hubble constant and the density parameters and . In this work, the lens-population parameters are .
The first term in Eq. (8) is the prior on the hyperparameters. In this work, we fix and to equal their injected values to focus exclusively on the inference of . We adopt a broad uniform prior for the lens mass-function slope, . For the lens number density, we adopt , following the prior range adopted in J. Gais et al. [54].
The second term describes the probability of detecting microlensing events for a given set of , assuming a Poisson distribution with an expected number given by:
where is the total number of microlensed events defined in Eq. (23), while encodes the underlying astrophysical population model for the source and lens parameters. In this work, the lens population is described by distribution given in Eq. (4), together with distribution given in Eq. (5). The term denotes the probability that a microlensed signal with the given source and lens parameters satisfies the adopted detection and distinguishability criteria.
The third term in Eq. (8) represents the joint likelihood of all detected microlensed events, constructed as a product of individual event contributions, assuming that each event is statistically independent given . This assumption allows the joint likelihood to be factorized into a product of event-level terms. In the numerator, denotes the event-level likelihood of each set of observed microlensed GW data, evaluated using posterior samples obtained from parameter estimation. In the denominator, denotes the detection efficiency, defined as the probability that a source drawn from the underlying population is identified as a microlensed event satisfying both the adopted SNR detection threshold and distinguishability criterion. It therefore accounts for the selection effects associated with both requirements. The detection efficiency for microlensed signals can be written as:
In practice, Eq. (10) can be estimated using importance sampling over a large set of simulated microlensed injections:
where and denote the total number of injected and successfully detected microlensed signals, respectively, and is the joint prior distribution used in the injection campaign.
Results
Inference of the Compact-Lens Distribution
Using Eq. (8), we infer the joint posterior distributions for and . To examine how the constraints on these population parameters improve as the mock microlensed-event sample accumulates, we consider cumulative samples containing , 100, and 132 events for both the and 2 scenarios. The scenario has a lower detectable-event rate than the scenario, and therefore requires a longer observing time to accumulate the same number of events. We compare the two scenarios at fixed to control for differences in sample size and isolate the impact of the underlying lens-mass distribution in Eq. (3) on the population constraints.
As shown in Figure 2, the widths of the posteriors for both hyperparameters become progressively narrower as the number of detections increases, while the posterior peaks converge toward their respective true values. Notably, is less well constrained than . This difference arises from its strong degeneracy with , which more directly governs the microlensing probability and magnification than .
Figure 2. Corner plots showing the posteriors of and inferred from the , 100, and 132 cases for the two fiducial scenarios (left) and (right). The black dotted lines denote the corresponding true values.
Furthermore, across both the and scenarios, the posteriors show a positive correlation between and , regardless of . Physically, a larger shifts the lens population toward lower-mass compact objects, which generally produce weaker microlensing signatures and are therefore less likely to be detected. A higher is then required to reproduce the same number of detections, giving rise to the observed – degeneracy. Increasing the catalog size tightens the constraints on both parameters, but the correlation persists, since it arises from the structure of the detection rate rather than from limited statistics alone.
In the scenario, the intrinsic lens-mass distribution is strongly weighted towards the lower-mass end. Even for , the detected population is therefore dominated by low-mass lenses, and the absence of high-mass lenses provides a strong constraint on . Because of the – correlation, this in turn tightens the constraint on .
For each dataset simulated under or , we calculate the Bayes factor between the two hypotheses by analyzing them separately with fixed to each value. We denote the log Bayes factor in favor of the and hypotheses by and , respectively. The resulting Bayes factors are reported in Table 1. As expected, the Bayes factor in favor of the injected hypothesis increases with .
| Injected (Bayes factor) | 50 | 100 | 132 |
| 1 () | 69 | 127 | 161 |
| 2 () | 76 | 159 | 226 |
Table 1. Log Bayes factors in favor of the injected hypothesis for different . Each entry is defined as , where and are the Bayesian evidences for the injected and alternative fixed- hypotheses, respectively.
Constraining the Dark Matter Fraction in Microlenses
According to E. L. Turner et al. [98], the comoving number density appearing in Eq. (21) can be written as:
where and denote the present-day compact-lens density and the critical density of the Universe, respectively, and is the corresponding density parameter. denotes the expectation value of the intrinsic lens mass, analytically derived from the assumed mass distribution truncated to a specific mass range. For a given , the theoretical is given by:
where and are the lower and upper bounds of the intrinsic lens-mass distribution, respectively. Since we consider redshifted lens masses and the maximum source redshift is , we adopt the corresponding global bounds on the intrinsic lens mass, and . If the compact lenses are interpreted as DM objects, such as PBHs or DM clumps, their density parameter can be expressed as , where denotes the fraction of total DM density contributed by compact lenses within the mass range . Note that corresponds to the case in which all DM is contained in compact lenses within this mass range.
Consequently, the posterior constraints on and obtained from the hierarchical Bayesian analysis in § 4.1 can be translated into constraints on , assuming a fiducial DM density parameter ([10]). Under these assumptions, the DM fraction associated with compact lenses can be written as:
Unlike monochromatic-mass constraints, our analysis accounts for an extended lens-mass range and its power-law spectrum, allowing the inferred to reflect both the lens abundance and its mass distribution.
Figure 3 shows the posteriors of , derived from the posterior samples of and for each case. In the scenario, the relatively high mean lens mass leads to a comparatively large true DM fraction of . For , the posterior is weakly constrained, with substantial support over a broad range and its peak noticeably offset from the true value. As shown similarly in Figure 2, the posterior becomes progressively narrower and more closely centered on the true value as increases. In particular, the lower bound on becomes progressively more stringent with increasing .
Figure 3. Posteriors of inferred for the (left) and (right) scenarios using catalogs with , 100, and 132 detected microlensing events. The hatched gray region marks the unphysical range with . The black dotted lines denote the corresponding true values.
In contrast, for the scenario, the substantially lower mean lens mass yields a much smaller true DM fraction of . The posterior is already peaked near the true value for , reflecting the relatively strong constraint on .
It is worth noting that while the physical boundary strictly requires , our posterior samples for the scenario extend into the unphysical regime (). This issue arises because the analysis was performed using broad hyperparameter priors that do not explicitly impose the physical constraint on . In our simplified population model, the physically allowed region in the parameter space can be derived analytically from Eq. (14). In more realistic compact-object population models, however, the mapping between hyperparameters and the implied value of is expected to become substantially more complex. For this reason, adopting broad priors at the hyperparameter level and subsequently excluding posterior samples with provides a more flexible and model-independent approach than imposing hard physical boundaries a priori.
In addition to , which quantifies the total contribution of compact lenses across the given lens-mass range, the differential dark-matter fraction as a function of lens mass, , provides a mass-resolved view of this contribution. In our power-law lens mass distribution model, this quantity can be derived analytically.
In particular,
where corresponds to an equal contribution to the DM density from each logarithmic mass interval. For , the DM contribution is weighted towards higher lens masses, whereas shifts the contribution towards lower masses. Figure 7 in Appendix § 10 illustrates this dependence.
Figure 7. The differential fraction of dark matter, , for the (left) and (right) scenarios, from catalogs with , 100, and 132 detected events. The black dashed lines denote the corresponding true spectra, while the colored shaded regions indicate the - credible regions after imposing .
Summary and Discussion
We have investigated the feasibility of constraining compact-object populations through hierarchical Bayesian inference applied to a catalog of identified GW microlensing events, while consistently accounting for selection effects. Using simulated microlensed BBH signals drawn from two representative power-law lens-mass distributions, with and , we demonstrate that the accumulation of microlensed GW detections can place meaningful constraints on both the mass-function slope and the comoving lens number density , while simultaneously breaking the degeneracy between these hyperparameters.
We further translate the inferred population parameters into constraints on the compact-DM fraction, , and investigate its dependence on both microlens mass and redshift. For a fixed number of detections, steeper microlens mass functions yield tighter constraints on , implying that compact-object populations dominated by lower-mass lenses are intrinsically more informative for measuring it. Accordingly, both the differential compact-DM fraction and the redshift-binned compact-DM fraction are recovered with smaller uncertainties for the scenario than for the scenario.
An additional advantage of our hierarchical framework is that it does not require explicit hard priors derived from the physical bounds on . Constructing such priors becomes increasingly difficult as the relationship between the population parameters and the physically allowed grows more complicated in realistic population models. Instead, the physically allowed and disallowed regions can be identified directly from the inferred posterior, making the framework both flexible and readily extensible to more general compact-object population models. Moreover, the inferred as a function of lens mass and redshift can reveal how the abundance of compact objects in different mass ranges evolves across cosmic time. Therefore, if observations can probe sufficiently distant lenses, the redshift evolution of beyond the peak of the cosmic star-formation rate can provide a test of whether the inferred compact-object population is consistent with conventional stellar remnants alone or requires additional populations such as PBHs.
Although our framework provides a robust foundation for population inference, several simplifying assumptions adopted in this work motivate important directions for future refinement. We employed a simplified population configuration in which the source-population hyperparameters are fixed, thereby focusing exclusively on the lens population. Incorporating uncertainties in the source population would weaken the constraints on the population properties. However, such an extension would also enable a direct investigation of potential degeneracies between the source and lens populations, particularly in scenarios where both originate from dark compact objects. This possibility becomes especially relevant if a fraction of the BBH population detected by LVK is itself primordial in origin [36, 70], since the source and lens populations could then share common formation channels and population characteristics.
In addition, we adopted a simple power-law model for the intrinsic lens-mass distribution. More physically motivated population distributions should be considered for PBH and other DM-related object populations when their theoretical predictions are sufficiently well established (see e.g., A. M. Green 2016; M. Fairbairn et al. 2023; E. Bagui et al. 2025; L. Vujeva et al. 2026a; M. Ho-Yeuk Cheung et al. 2026). We also assumed a constant , despite the possibility that the compact-lens population evolves over cosmic time. A more realistic treatment could incorporate redshift evolution through a parameterization, such as , where characterizes the redshift evolution of the lens abundance. Such models generally require additional hyperparameters and would introduce further correlations between the source and lens population properties.
Regarding detectability, two aspects of the selection effects should be further refined. First, current GW search pipelines may fail to detect highly distorted microlensed signals, even when their optimal SNRs are sufficiently large, because signal-consistency tests can downrank waveforms that deviate substantially from the unlensed template bank [34]. A realistic selection function should therefore account for the additional detection criteria used by GW search pipelines, such as the signal-consistency test [14]. Second, among the events recovered by the search pipeline, identifying a signal as microlensed requires a sufficiently low FPP. Rather than relying solely on a Bayes-factor threshold, this probability should be calibrated through dedicated background injections, allowing the microlensing identification criterion and its associated selection effects to be modeled consistently.
Lastly, our injection-and-recovery framework relies exclusively on the isolated point-mass lens model. However, microlensed GW signals may also originate from galaxies in which strong lensing by their gravitational potential is possible, with stellar or compact-object populations embedded within the lens galaxy introducing additional microlensing perturbations. Such systems can produce waveform distortions substantially more complex than those generated by an isolated point-mass lens alone [45, 44, 37, 76, 75, 88, 104, 90, 91, 89, 59, 100]. Similar diffraction is also expected near caustics [49], the regions of highest magnification, leading to unique observational signatures (R. K. L. Lo et al. 2025) and boosting the effects of DM subhalos [99]. Addressing these limitations will require both more robust statistical detection frameworks and the development of more sophisticated waveform models in future analyses.
Acknowledgments
We thank Srashti Goyal for her valuable comments and feedback. E. S. is supported by grants from the College of Science and Engineering of the University of Glasgow. J.M.E. is supported by Research Grant No. VIL53101 from Villum Fonden and the Marie Sklodowska-Curie Grant Agreement No. 847523 INTERACTIONS. The Center of Gravity is a Center of Excellence funded by the Danish National Research Foundation under grant no. DNRF184.. M. H. is supported by the Science and Technology Facilities Council (Grant Ref. ST/V005634/1). The authors are grateful for computational resources provided by the LIGO Laboratory and supported by the National Science Foundation Grants PHY-0757058 and PHY-0823459. This material is based upon work supported by NSF’s LIGO Laboratory which is a major facility fully funded by the National Science Foundation.
Mock BBH Population
We generate the population of simulated unlensed source BBHs from the PowerLaw+Peak primary mass model and a Madau–Dickinson-like (P. Madau & M. Dickinson [72]) redshift distribution, adopting the posterior median values of the population hyperparameters inferred from GWTC-3 (R. Abbott et al. [6]), as summarized in Table 2.
| Parameter | Description | Injected value |
| Spectral index for the power law of the primary mass distribution | 3.78 | |
| Spectral index for the power law of the mass ratio distribution | 0.81 | |
| Minimum mass of the power-law component of the black hole mass distribution | ||
| Maximum mass of the power-law component of the black hole mass distribution | ||
| Fraction of BBH systems in the Gaussian component | 0.03 | |
| Mean of the Gaussian component in the primary mass distribution | ||
| Standard deviation of the Gaussian component in the primary mass distribution | ||
| Range of mass tapering at the lower end of the mass distribution | ||
| Redshift at which the distribution peaks | 2.7 | |
| Power-law index of the redshift distribution for | 4.59 | |
| Power-law index of the redshift distribution for | 2.86 |
Table 2. List of hyperparameters of the BBH population model and their injected values used in our GWTC-3-based simulations.
Mass distribution
The primary source-frame mass is drawn from a truncated power law defined over and , with a Gaussian peak and a smooth low-mass taper:
where denotes the power-law index, and , , and correspond to the mixture fraction, mean, and standard deviation of the Gaussian component, respectively. represents a smoothing function, which is given by
where sets the width of the low-mass taper applied near .
The secondary mass is determined by the mass ratio , which is drawn from a truncated power-law distribution with the low-mass smoothing function defined in Eq. (17):
where denotes the power-law index of the distribution.
Redshift distribution
For a source-frame merger-rate density at redshift , the number of mergers per unit detector-frame time and redshift is given by:
where is the comoving volume at . Following the parametrization of T. Callister et al. [23], which builds on the star-formation-rate form of P. Madau & M. Dickinson [72], the merger rate density can be written as:
where , is the redshift at which peaks, and and denote the asymptotic power-law indices and , respectively. In our simulations, we adopt the local merger rate density .
Consistency with GWTC-5
The most recent BBH population model is based on GWTC-5 (A. Abac et al. [3]). Since repeating the full parameter-estimation analysis with the updated population is computationally expensive, we instead repeat the mock-catalog generation using the posterior-median hyperparameters from the GWTC-5 population analysis (The LIGO Scientific Collaboration et al. 2026), which adopts a Broken Power Law + 2 Peaks model for the primary-mass distribution (C. Talbot & E. Thrane [96]; The LIGO Scientific Collaboration et al. 2026) and a simple power law for the redshift distribution, while retaining the same mass-ratio distribution as that given in Eq. (18).
Relative to the GWTC-3 population, the GWTC-5 population yields a larger total number of simulated events satisfying owing to its higher detector sensitivity, and therefore a larger absolute number of microlensed events.
To compare the microlensing distinguishability on an equal footing, we instead consider the fraction of detectable microlensed events that satisfy . For (), this fraction changes from () for GWTC-3 to () for GWTC-5. We further compare the distributions of the detector-frame chirp mass () and , which are directly related to the microlensing distinguishability. As shown in Figure 4, the GWTC-3 and GWTC-5 populations predict nearly identical distributions of these observable quantities. The choice of BBH population model is therefore unlikely to have a significant impact on our inference of .
Figure 4. Comparison of the detectable microlensed BBH populations for (top) and (bottom) generated from the GWTC-3 (blue) and GWTC-5 (orange) population models. The left and right panels show the distributions of and , respectively.
Microlensing Optical Depths
Only a fraction of GW signals are expected to undergo detectable microlensing, with the microlensing probability characterized by the optical depth, , for a GW source at redshift . Assuming that the lenses are uniformly distributed, for a given value, the optical depth can be written as:
where is the distribution of given by Eq. (3), assuming a fixed over the mass range . The factor is introduced because, in the wave-optics regime, diffraction effects allow detectable microlensing signatures to extend beyond commonly associated with EM microlensing () (see e.g. M. Çalışkan et al. [22]). Consequently, the effective lensing cross-section expands to (R. Takahashi & T. Nakamura [95]). As discussed in § 2.3 (see Figure 1), we adopt and for the the populations, respectively.
The population-averaged optical depth is obtained by averaging Eq. (21) over the simulated BBH redshift distribution:
where is the normalized source-redshift distribution and denotes the maximum source redshift considered in the simulation. For a survey containing GW sources, the expected number of microlensed events is given by:
Lens parameters of identified microlensed events
The lens properties of identified microlensed events can provide an early indication of the underlying lens-mass distribution. Figure 5 compares the posterior medians of and , together with the network SNRs, of events identified with . For each scenario, we also show the corresponding distributions for 1000 randomly selected events from the initial simulated population.
Figure 5. Histograms of the posterior medians of and , and of identified microlensed events with . The upper and lower rows correspond to and , respectively, with fixed. For and , the histograms are compared with those of 1000 samples drawn from the corresponding population models.
The two scenarios differ most notably in their distributions. For , events with are rare in the initial population and are consequently unlikely to be identified. By contrast, the scenario yields a broader distribution with a substantially larger fraction of low-mass lenses, making such events more likely to be identified. Repeated detections of microlensed events with low could therefore provide an early indication in favor of . The hierarchical Bayesian analysis quantifies this distinction by incorporating the information carried by individual events into the population-level inference.
Mass-dependent dark matter fraction
in Eq. (14) compresses the lens population into a single number, and in our hierarchical model it is constrained only through the correlated pair . We therefore map the joint posterior onto the differential DM fraction that (i) provides a direct view of which lens-mass scales contribute to the inferred compact-object mass density, and (ii) allows direct comparison with mass-dependent constraints on compact-object scenarios whose abundance is expected to be concentrated within specific mass ranges, such as PBHs [27]. The differential DM fraction per is given by:
We evaluate Eq. (24) for each joint posterior sample of . As discussed in § 4.2, in the scenario, a fraction of the joint posterior lies in the unphysical region . Figure 6 illustrates the corresponding unphysical posterior samples, which will be discarded in evaluating Eq. (24).
Figure 6. Joint posterior samples in the plane for , 100, and 132. The gray dots indicate the unphysical domain and are discarded in evaluating the differential .
Figure 7 shows the differential spectra obtained from the remaining physical samples. For , the differential DM fraction increases approximately as , so uncertainties in increasingly broaden the spectrum toward higher . Note that the truncation preferentially removes the high- tail, particularly for , shifting the median and narrowing the credible interval so that its constraint can appear nearly as tight as that for despite the smaller number of detected events. This apparent tightening is caused by the physical truncation rather than by additional constraining power from the data.
For , by contrast, the differential spectrum is substantially flatter. In this case, is approximately independent of , reducing the propagation of uncertainty in toward higher . Reflecting the improved constraining power of the larger event sample, yields the narrowest credible interval and the closest agreement with the true spectrum among the three cases.
References
- [1]Abac, A., Abouelfettouh, I., Acernese, F., et al. 2025a, arXiv preprint arXiv:2512.16347arxiv.org/abs/2512.16347
- [2]Abac, A., Abouelfettouh, I., Acernese, F., et al. 2025b, arXiv preprint arXiv:2508.18083DOI
- [3]Abac, A., Abe, A., Abouelfettouh, I., et al. 2026, arXiv preprint arXiv:2605.27225arxiv.org/abs/2605.27225
- [4]Abbott, B. P., Abbott, R., Abbott, T., et al. 2020, Living reviews in relativity, 23, 1
- [5]Abbott, R., Abbott, T. D., Abraham, S., et al. 2021, The Astrophysical Journal, 923, 14
- [6]Abbott, R., Abbott, T., Acernese, F., et al. 2023, Physical Review X, 13, 011048
- [7]Abbott, R., Abe, H., Acernese, F., et al. 2024, The Astrophysical Journal, 970, 191
- [8]Abrams, N. S., & Takada, M. 2020, The Astrophysical Journal, 905, 121
- [9]Acernese, F., Agapito, A., Agarwal, D., et al. 2026, arXiv preprint arXiv:2607.26872arxiv.org/abs/2607.26872
- [10]Ade, P. A. A., Aghanim, N., Arnaud, M., et al. 2016, Astronomy & Astrophysics, 594, A13
- [11]Alcock, C., Allsman, R., Alves, D. R., et al. 2001, The Astrophysical Journal Letters, 550, L169
- [13]Ashton, G., Hübner, M., Lasky, P. D., et al. 2019, The Astrophysical Journal Supplement Series, 241, 27
- [14]Babak, S., Biswas, R., Brady, P., et al. 2013, Physical Review D, 87, 024033
- [16]Barsode, A., Kapadia, S., & Ajith, P. 2024, The Astrophysical Journal, 975, 48
- [17]Basak, S., Ganguly, A., Haris, K., et al. 2022, The Astrophysical Journal Letters, 926, L28
- [18]Belczynski, K., Sadowski, A., & Rasio, F. A. 2004, The Astrophysical Journal, 611, 1068
- [19]Blaineau, T., Moniez, M., Afonso, C., et al. 2022, Astronomy & Astrophysics, 664, A106
- [20]Bramante, J., Diamond, M., & Kim, J. L. 2024, Journal of Cosmology and Astroparticle Physics, 2024, 002
- [21]Buckley, M. R., & DiFranzo, A. 2018, Physical review letters, 120, 051102
- [22]Çalışkan, M., Anıl Kumar, N., Ji, L., et al. 2023, Phys. Rev. D, 108, 123543, doi: 10.1103/PhysRevD.108.123543
- [23]Callister, T., Fishbach, M., Holz, D. E., & Farr, W. M. 2020, The Astrophysical Journal Letters, 896, L32
- [24]Cao, Z., Li, L.-F., & Wang, Y. 2014, Phys. Rev. D, 90, 062003, doi: 10.1103/PhysRevD.90.062003
- [25]Capote, E., Jia, W., Aritomi, N., et al. 2025, Physical Review D, 111, 062002
- [26]Cardoso, V., & Pani, P. 2019, Living Reviews in Relativity, 22, 4
- [27]Carr, B., Kühnel, F., & Sandstad, M. 2016, Physical Review D, 94, 083504
- [28]Carr, B., Raidal, M., Tenkanen, T., Vaskonen, V., & Veermäe, H. 2017a, Physical Review D, 96, 023514
- [29]Carr, B., Tenkanen, T., & Vaskonen, V. 2017b, Physical Review D, 96, 063507
- [30]Carr, B. J., & Green, A. M. 2025, in Primordial black holes (Springer), 3–33
- [31]Chabrier, G. 2003, Publications of the Astronomical Society of the Pacific, 115, 763
- [32]Chakraborty, A., & Mukherjee, S. 2026, The Astrophysical Journal, 1003, 20
- [33]Chan, J. C., Ezquiaga, J. M., Lo, R. K., et al. 2026, Physical Review D, 114, L201502
- [34]Chan, J. C., Seo, E., Li, A. K., Fong, H., & Ezquiaga, J. M. 2024, arXiv preprint arXiv:2411.13058DOI
- [35]Chang, J. H., Egana-Ugrinovic, D., Essig, R., & Kouvaris, C. 2019, Journal of Cosmology and Astroparticle Physics, 2019, 036
- [36]Chen, Z.-C., Yuan, C., & Huang, Q.-G. 2022, Physics Letters B, 829, 137040
- [37]Cheung, M. H., Gais, J., Hannuksela, O. A., & Li, T. G. 2021, Monthly Notices of the Royal Astronomical Society, 503, 3326
- [39]Christian, P., Vitale, S., & Loeb, A. 2018, Phys. Rev. D, 98, 103022, doi: 10.1103/PhysRevD.98.103022DOI
- [40]Coleman Miller, M., & Colbert, E. J. 2004, International Journal of Modern Physics D, 13, 1
- [41]Colleoni, M., Ramis Vidal, F. A., García-Quirós, C., Akçay, S., & Bera, S. 2025, Phys. Rev. D, 111, 104019, doi: 10.1103/PhysRevD.111.104019DOI
- [42]d’Amico, G., Panci, P., Lupi, A., Bovino, S., & Silk, J. 2018, Monthly Notices of the Royal Astronomical Society, 473, 328
- [43]Deguchi, S., & Watson, W. D. 1986, Astrophysical Journal, Part 1 (ISSN 0004-637X), vol. 307, Aug. 1, 1986, p. 30-37., 307, 30
- [44]Diego, J. M. 2020, Phys. Rev. D, 101, 123512, doi: 10.1103/PhysRevD.101.123512DOI
- [45]Diego, J. M., Hannuksela, O. A., Kelly, P. L., et al. 2019, Astronomy & Astrophysics, 627, A130
- [46]Diemand, J., Kuhlen, M., Madau, P., et al. 2008, Nature, 454, 735
- [47]Dominik, M., & Sahu, K. C. 2000, The Astrophysical Journal, 534, 213
- [48]Ezquiaga, J. M., Hu, W., Lagos, M., Lin, M.-X., & Xu, F. 2022, Journal of Cosmology and Astroparticle Physics, 2022, 016
- [49]Ezquiaga, J. M., Lo, R. K. L., & Vujeva, L. 2025, Phys. Rev. D, 112, 043544, doi: 10.1103/tkk2-x9stDOI
- [50]Fairbairn, M., Urrutia, J., & Vaskonen, V. 2023, Journal of Cosmology and Astroparticle Physics, 2023, 007
- [51]Fardeen, J., McGill, P., Perkins, S. E., et al. 2024, The Astrophysical Journal, 965, 138
- [52]Farr, W. M. 2019, Research Notes of the AAS, 3, 66
- [53]Fedorova, E., Slusar, V., Zhdanov, V., et al. 2016, Monthly Notices of the Royal Astronomical Society, 457, 4147
- [54]Gais, J., Ng, K. K., Seo, E., Wong, K. W., & Li, T. G. 2022, The Astrophysical Journal Letters, 932, L4
- [55]Gaudi, B. S. 2012, Annual Review of Astronomy and Astrophysics, 50, 411
- [56]Gould, A. 1992, Astrophysical Journal, Part 1, 392, 442
- [57]Gould, A. 2000, The Astrophysical Journal, 542, 785
- [58]Gould, A. 2004, The Astrophysical Journal, 606, 319
- [59]Goyal, S., Villarrubia-Rojo, H., & Zumalacárregui, M. 2026, The Astrophysical Journal Letters, 1008, L12
- [61]Green, A. M. 2026, arXiv preprint arXiv:2602.15974arxiv.org/abs/2602.15974
- [62]Green, A. M., & Kavanagh, B. J. 2021, Journal of Physics G: Nuclear and Particle Physics, 48, 043001
- [63]Hannuksela, O., Haris, K., Ng, K., et al. 2019, The Astrophysical Journal Letters, 874, L2
- [66]James-Turner, C., Weil, D. P., Green, A. M., & Copeland, E. J. 2020, Physical Review D, 101, 123526
- [67]Jung, S., & Shin, C. S. 2019, Phys. Rev. Lett., 122, 041103, doi: 10.1103/PhysRevLett.122.041103DOI
- [68]Lai, K.-H., Hannuksela, O. A., Herrera-Martín, A., et al. 2018, Phys. Rev. D, 98, 083005, doi: 10.1103/PhysRevD.98.083005DOI
- [69]Lin, X.-Y., Wang, X.-J., Zhou, H., et al. 2025, arXiv preprint arXiv:2508.13577arxiv.org/abs/2508.13577
- [70]Liu, L., You, Z.-Q., Wu, Y., & Chen, Z.-C. 2023, Physical Review D, 107, 063035
- [72]Madau, P., & Dickinson, M. 2014, Annual Review of Astronomy and Astrophysics, 52, 415
- [73]Mandel, I., Farr, W. M., & Gair, J. R. 2019, Monthly Notices of the Royal Astronomical Society, 486, 1086
- [74]Mao, S. 2012, Research in Astronomy and Astrophysics, 12, 947
- [75]Meena, A. K., Mishra, A., More, A., Bose, S., & Bagla, J. S. 2022, Monthly Notices of the Royal Astronomical Society, 517, 872
- [76]Mishra, A., Meena, A. K., More, A., Bose, S., & Bagla, J. S. 2021, Monthly Notices of the Royal Astronomical Society, 508, 4869
- [78]Nakamura, T. T. 1998, Physical review letters, 80, 1138
- [79]Narayan, R. 2005, New Journal of Physics, 7, 199
- [80]Niikura, H., Takada, M., Yasuda, N., et al. 2019, Nature Astronomy, 3, 524
- [81]Oguri, M., Diego, J. M., Kaiser, N., Kelly, P. L., & Broadhurst, T. 2018, Physical Review D, 97, 023518
- [82]Perkins, S. E., McGill, P., Dawson, W., et al. 2024, The Astrophysical Journal, 961, 179
- [83]Pratten, G., García-Quirós, C., Colleoni, M., et al. 2021, Physical Review D, 103, 104056
- [84]Romao, M. C., Croon, D., Crossey, B., & Godines, D. 2025, Journal of Cosmology and Astroparticle Physics, 2025, 066
- [85]Ryan, M., & Radice, D. 2022, Physical Review D, 105, 115034
- [86]Sasaki, M., Suyama, T., Tanaka, T., & Yokoyama, S. 2018, Classical and Quantum Gravity, 35, 063001
- [87]Schneider, P., Kochanek, C., & Wambsganss, J. 2006, Gravitational lensing: strong, weak and micro: Saas-Fee advanced course 33, Vol. 33 (Springer Science & Business Media)
- [88]Seo, E., Hannuksela, O. A., & Li, T. G. 2022, The Astrophysical Journal, 932, 50
- [89]Seo, E., Shan, X., Janquart, J., et al. 2025, The Astrophysical Journal, 988, 159
- [90]Shan, X., Chen, X., Hu, B., & Cai, R.-G. 2023, arXiv preprint arXiv:2301.06117DOI
- [91]Shan, X., Chen, X., Hu, B., & Li, G. 2024, Sci. China Phys. Mech. Astron., 67, 269511, doi: 10.1007/s11433-023-2334-9DOI
- [92]Shan, X., Yang, H., & Mao, S. 2025, arXiv preprint arXiv:2512.19118arxiv.org/abs/2512.19118
- [93]Silk, J., & Stebbins, A. 1993, Astrophysical Journal-Part 1, 411, 439
- [94]Speagle, J. S. 2020, Monthly Notices of the Royal Astronomical Society, 493, 3132
- [95]Takahashi, R., & Nakamura, T. 2003, The Astrophysical Journal, 595, 1039
- [96]Talbot, C., & Thrane, E. 2018, The Astrophysical Journal, 856, 173
- [98]Turner, E. L., Ostriker, J. P., & Gott III, J. R. 1984, Astrophysical Journal, Part 1 (ISSN 0004-637X), vol. 284, Sept. 1, 1984, p. 1-22., 284, 1
- [99]Vujeva, L., Ezquiaga, J. M., Gilman, D., Goyal, S., & Zumalacárregui, M. 2026a, Phys. Rev. D, 114, 083024, doi: 10.1103/kp86-q1h2
- [100]Vujeva, L., Ezquiaga, J. M., Lo, R. K. L., & Zwick, L. 2026b, https://arxiv.org/abs/2608.07667
- [101]Wang, B., & Yang, T. 2026, arXiv preprint arXiv:2604.08179arxiv.org/abs/2604.08179
- [102]Winch, H., Setford, J., Bovy, J., & Curtin, D. 2022, The Astrophysical Journal, 933, 177
- [103]Wright, M., & Hendry, M. 2022, The Astrophysical Journal, 935, 68
- [104]Yeung, S. M., Cheung, M. H., Seo, E., et al. 2023, Monthly Notices of the Royal Astronomical Society, 526, 2230
- [105]Zhang, K., Luo, L.-W., Tsao, J.-S., Chen, C.-S., & Lin, F.-L. 2023, Results in Physics, 53, 106967
- [106]Zumalacarregui, M., & Seljak, U. 2018, Physical review letters, 121, 141101






