betaFeedback

WorksPhysics and Astronomy

Optical Transmission of 2D Material with Quantum Anomalous Hall Effect

Abstract

We study the optical properties of gapped two-dimensional materials which are subject to the quantum anomalous Hall effect. At sufficiently low temperatures the transmission, reflection and absorption coefficients are found to have a universal behavior that depends only on the ratio of the photonic energy and the gap energy. There is a singular behavior with total reflection when these energies are equal. In the limit of a vanishing gap we recover results for graphene, where the optical coefficients depend only on the fine-structure constant. The observed optical properties provide an accurate measurement of the bandgap.

Introduction

The optical response of two-dimensional (2D) materials has attracted significant attention in semiconductor physics due to their unconventional electronic structure and transport properties. While graphene and related hexagonal systems have been extensively studied, materials exhibiting topologically nontrivial transport, particularly the quantum anomalous Hall (QAH) effect, remain an active area of investigation.

The QAH effect is characterized by a finite transverse (Hall) conductivity in the absence of an external magnetic field, arising from intrinsic time-reversal symmetry breaking. It is closely related to the quantum Hall effect, in which the Hall conductivity is quantized in integer multiples of e2/he^{2}/h under an applied magnetic field [1]. In contrast, the QAH effect emerges from the band topology of the material. Experimentally, QAH phases have been realized in magnetically doped topological insulators, where ferromagnetism is induced via transition-metal doping (e.g., Cr-, V-, or Mn-doped (Bi,Sb)2Te3(\mathrm{Bi},\mathrm{Sb})_{2}\mathrm{Te}_{3}) [1, 2, 3, 4, 5] and in intrinsic magnetic topological insulators such as Mn-doped (Bi,Sb)2Te4(\mathrm{Bi},\mathrm{Sb})_{2}\mathrm{Te}_{4}. In addition, moiré-engineered systems provide a versatile platform for realizing QAH states. Twisted bilayer graphene and transition metal dichalcogenide heterobilayers (e.g., MoTe2/WSe2\mathrm{MoTe}_{2}/\mathrm{WSe}_{2}) [6, 7] can host flat bands with nonzero Chern number, enabling QAH phases at fractional fillings; for example, a Chern number C=2C=2 state has been predicted at 2/32/3 filling in twisted bilayer graphene.

Recent theoretical work has further expanded the class of candidate systems, suggesting that QAH behavior may also arise in ferromagnetic metals and even in nonmagnetic systems such as bismuth monolayers with large Chern numbers [8, 9]. This broadens the range of materials available for applications, including resistance metrology, low-power electronics, and spintronic devices [5]. Understanding the optical response of such systems is therefore of both fundamental and practical interest.

In this work, we investigate the transmission, reflection, and absorption of electromagnetic radiation in a 2D system exhibiting the QAH effect. We adopt a two-band model with band gap 2m2m, following Ref. [10], and compute the optical response using Maxwell’s equations with appropriate boundary conditions. The material is characterized by a conductivity tensor containing both longitudinal and Hall components, with the Hall conductivity σH\sigma_H encoding the QAH response.

The analysis naturally separates into two frequency regimes defined by ζ=ℏω/2m\zeta= \hbar\omega/2m. For ζ<1\zeta< 1, interband transitions are suppressed and the longitudinal conductivity vanishes, leaving a purely antisymmetric conductivity tensor with nonzero Hall components. For ζ≥1\zeta\ge1, interband transitions lead to a finite longitudinal conductivity, and both diagonal and off-diagonal components contribute. This results in a discontinuity in the transmission and reflection coefficients at ζ=1\zeta= 1, along with the onset of absorption. For comparison, we also consider a system with purely longitudinal conductivity and no QAH effect, described by a diagonal conductivity tensor with equal components. In this case, the same threshold behavior at ζ=1\zeta= 1 is observed, but without Hall contributions.

The paper is organized as follows. In Sect. 2 we present the Maxwell equation for a 2D sheet in a oscillating electric field. The quantum transport in gapped 2D materials is discussed in Sect. 3 and its consequences for the transmission, reflection and absorption are analyzed in Sect. 4. This is followed in § 5 by a discussion of the results.

Electric field

The electric field is subject to the Maxwell equations, in which the 2D material acts as a boundary condition in zz direction at z=0z = 0, while the field is homogeneous in xx and yy direction. We distinguish three fields, namely the incident field Ei=E~ieiqz+iωt\mathbf{E}_i = \widetilde{\mathbf{E}}_i e^{iqz+i\omega t}, the transmitted field Et=E~teiqz+iωt\mathbf{E}_t = \widetilde{\mathbf{E}}_t e^{iqz+i\omega t} and the reflected field Er=E~re−iqz+iωt\mathbf{E}_r = \widetilde{\mathbf{E}}_r e^{-iqz+i\omega t}, where we assume that these fields vary only in the zz-direction periodically with wave number qq. Since the electric field is continuous at the surface, the boundary condition at z=0z = 0 reads

E~i+E~r=E~t.(1)\widetilde{\mathbf{E}}_i + \widetilde{\mathbf{E}}_r = \widetilde{\mathbf{E}}_t. \tag*{(1)}

The goal is to find a solution of Maxwell’s equations with this boundary condition. The source of the field inside the 2D sheet is given by a current density j(z,t)=jδ(z)eiωt\mathbf{j}(z,t) = \mathbf{j}\delta(z)e^{i\omega t}, such that the Maxwell equation becomes

∂2E∂z2=−ω2c2E−iωμ0δ(z)j(2)\frac{\partial^2 \mathbf{E}}{\partial z^2} = -\frac{\omega^2}{c^2}\mathbf{E} - i\omega\mu_0\delta(z)\mathbf{j} \tag*{(2)}

with the relative dielectric constant ϵ\epsilon and the vacuum dielectric constant ϵ0\epsilon_0. Integrating this equation and using in the continuity equation Eq. (1) yields [10]

−iqE~t+iq(E~i−E~r)=iωμ0j.(3)-iq\widetilde{\mathbf{E}}_t + iq\left(\widetilde{\mathbf{E}}_i - \widetilde{\mathbf{E}}_r\right) = i\omega\mu_0\mathbf{j}. \tag*{(3)}

Since the current density is the response to the electric field inside the sheet, we employ Ohm’s law j=σE~t\mathbf{j} = \sigma\widetilde{\mathbf{E}}_t with the conductivity tensor

σ=[σxxσH−σHσxx].(4)\sigma= \begin{bmatrix} \sigma_{xx} & \sigma_H \\ -\sigma_H & \sigma_{xx} \end{bmatrix}. \tag*{(4)}

σH\sigma_H is the Hall optical conductivity and σxx\sigma_{xx} is the longitudinal conductivity. With the dispersion relation ω=cq\omega= cq we get eventually from Eqs. (3) and (1) a relation between the transmitted and the reflected electric field:

E~r=−1σ0σE~t(5)\widetilde{\mathbf{E}}_r = -\frac{1}{\sigma_0}\sigma\widetilde{\mathbf{E}}_t \tag*{(5)}

with σ0=2ϵ0c\sigma_0 = 2\epsilon_0 c, where we have used μ0=1/ϵ0c2\mu_0 = 1/\epsilon_0 c^2. Moreover, we get from E~r=E~t−E~i\widetilde{\mathbf{E}}_r = \widetilde{\mathbf{E}}_t - \widetilde{\mathbf{E}}_i the relation

E~t=(1+1σ0σ)−1E~i.(6)\widetilde{\mathbf{E}}_t = \left(1 + \frac{1}{\sigma_0}\sigma\right)^{-1}\widetilde{\mathbf{E}}_i. \tag*{(6)}

These two relations will be used subsequently to calculate the transmission, reflectance and absorption for the 2D sheet, where the latter is characterized by its conductivity tensor σ\sigma.

Quantum transport

Optical properties of a material are determined by the electronic transport. In the present case of a 2D material, the optical properties are expressed by the linear response to an in-plane electric field, which oscillates in time with frequency ω\omega. The conductivity tensor consists of the longitudinal conductivity σxx\sigma_{xx} and the Hall conductivity σH\sigma_H. Within the Kubo formalism we obtain in the absence of thermal fluctuations [12, 13]

σH=e24hζlog⁡∣1+ζ1−ζ∣,ζ=ℏω/2m(7)\sigma_H = \frac{e^2}{4h\zeta}\log\left|\frac{1+\zeta}{1-\zeta}\right|,\quad\zeta= \hbar\omega/2m \tag*{(7)}

and

σxx=πe22h(1+ζ−2)Θ(ζ−1),(8)\sigma_{xx} = \frac{\pi e^2}{2h}\left(1+\zeta^{-2}\right)\Theta(\zeta-1), \tag*{(8)}

where ee is the electron charge and hh is the Planck constant. σxx\sigma_{xx} vanishes if the energy of the electric field ℏω\hbar\omega is less than the gap energy. Both conductivities are subject to quantum fluctuations, reflected by the universal prefactor G0=πe2/2hG_0 = \pi e^2/2h [15] with the value h/e2≈26kΩh/e^2 \approx26\mathrm{k}\Omega. We note that σxx\sigma_{xx} decreases only by a factor of 1/21/2 over the entire range of ζ>1\zeta> 1 In contrast, the classical conductivity, which is obtained from the Boltzmann theory, depends on non-universal material properties. Comparing this result with the conventional Drude approach [16], the classical parameter nτ/mn\tau/m (nn is the electron density, τ\tau is the scattering time and mm is the electron mass) in the latter is replaced by the universal parameter π/2h\pi/2h in quantum transport. Moreover, the only physical parameter is the ratio ζ=ℏω/2m\zeta= \hbar\omega/2m. Thus, the relevant energy scale of the 2D material is given by the gap 2m2m, which is in typical materials of the order of 1eV. The temperature-dependent conductivity depends on ℏω/kBT\hbar\omega/k_BT, which does not change significantly if ℏω/kBT>10\hbar\omega/k_BT > 10 [17]. Therefore, thermal fluctuations can be neglected if this condition is satisfied. With these expressions we anticipate that the optical properties depend on ζ\zeta with the singular point ζ=1\zeta= 1.

The discontinuity of σxx\sigma_{xx} is the result of the photo-electric effect, through which excitation of the electron-hole pairs across the band gap in 2D sheet are possible: For a band gap 2m2m an incoming electromagnetic radiation with frequency ℏω<2m\hbar\omega< 2m cannot be absorbed to excite electrons from the valence band to the conduction band, meaning that the conduction band will be left empty. As a result, the material will have zero longitudinal optical conductivity in this domain, as seen in Figure 1. However, once ℏω\hbar\omega exceeds the gap energy 2m2m, electron-hole pairs can be created across the band gap due to the photo-electric effect. This allows for a non-zero longitudinal optical conductivity, leading to electron-hole pair excitations across the band gap. The nature of the Hall conductivity is different, since it does not rely on the creation of electrons in the conduction band in the bulk of the 2D sheet but is the consequence of special correlations, as we can see from the Kubo approach [12]. Therefore, it is nonzero even when the energy quantum of the electric field ℏω\hbar\omega is less than the gap or even zero. This is reflected by behavior in Eq. (7), which is also sensitive to the creation of electron-hole pairs.

Image not extracted

Figure 1. The optical conductivities of a 2D material in units of G0G_0 with a band gap 2m2m in the presence of the QAH effect as a function of the scaled frequency ζ=ℏω/2m\zeta= \hbar\omega/2m.

Optical properties: transmission, reflection and absorption

The transmission TT and reflection RR coefficients are calculated from the intensities of the transmitted and the reflected electric fields relative to the intensity of the incoming electric field. They are written for E~i,t,rx=E~i,t,rcos⁡ϕ\tilde{E}^{x}_{i,t,r}=\tilde{E}_{i,t,r}\cos\phi and E~i,t,ry=E~i,t,rsin⁡ϕ\tilde{E}^{y}_{i,t,r}=\tilde{E}_{i,t,r}\sin\phi as

T=ItIi=∣E~tx∣2+∣E~ty∣2∣E~ix∣2+∣E~iy∣2=E~t2E~i2,(9)T=\frac{I_t}{I_i}=\frac{\lvert\tilde{E}^{x}_t\rvert^2+\lvert\tilde{E}^{y}_t\rvert^2}{\lvert\tilde{E}^{x}_i\rvert^2+\lvert\tilde{E}^{y}_i\rvert^2}=\frac{\tilde{E}_t^2}{\tilde{E}_i^2}, \tag*{(9)}
R=IrIi=∣E~rx∣2+∣E~ry∣2∣E~ix∣2+∣E~iy∣2=E~r2E~i2(10)R=\frac{I_r}{I_i}=\frac{\lvert\tilde{E}^{x}_r\rvert^2+\lvert\tilde{E}^{y}_r\rvert^2}{\lvert\tilde{E}^{x}_i\rvert^2+\lvert\tilde{E}^{y}_i\rvert^2}=\frac{\tilde{E}_r^2}{\tilde{E}_i^2} \tag*{(10)}

and the absorption coefficient A=1−T−RA=1-T-R. As a consequence of the assumed isotropy of the 2D sheet, there is no ϕ\phi dependence. For anisotropic materials, such as graphene-like materials under uniaxial strain, we would also get a ϕ\phi dependence in the optical properties [10, 11].

In order to calculate the coefficients, we use Eqs. (5), (6) and define the constant

γ=det⁡(1+σ/σ0)=(1+sxx)2+sH2(11)\gamma=\det(1+\boldsymbol{\sigma}/\sigma_0)=(1+s_{xx})^2+s_H^2 \tag*{(11)}

with sxx=σxx/σ0s_{xx}=\sigma_{xx}/\sigma_0 and sH=σH/σ0s_H=\sigma_H/\sigma_0 to get

E~t[cos⁡ϕsin⁡ϕ]=E~iγ[(sxx+1)cos⁡ϕ−sHsin⁡ϕsHcos⁡ϕ+(sxx+1)sin⁡ϕ](12)\tilde{E}_t \begin{bmatrix} \cos\phi\\ \sin\phi \end{bmatrix} = \frac{\tilde{E}_i}{\gamma} \begin{bmatrix} (s_{xx}+1)\cos\phi-s_H\sin\phi\\ s_H\cos\phi+(s_{xx}+1)\sin\phi \end{bmatrix} \tag*{(12)}

and

E~r[cos⁡ϕsin⁡ϕ]=E~iγ[−(sxx2+sH2+sxx)cos⁡ϕ−sHsin⁡ϕsHcos⁡ϕ−(sxx2+sH2−sxx)sin⁡ϕ].(13)\tilde{E}_r \begin{bmatrix} \cos\phi\\ \sin\phi \end{bmatrix} = \frac{\tilde{E}_i}{\gamma} \begin{bmatrix} -(s_{xx}^2+s_H^2+s_{xx})\cos\phi-s_H\sin\phi\\ s_H\cos\phi-(s_{xx}^2+s_H^2-s_{xx})\sin\phi \end{bmatrix}. \tag*{(13)}

Then, using the definitions in Eqs. (9), (10) we obtain for the transmission and reflection coefficients:

T=1(1+sxx)2+sH2,R=sxx2+sH2(1+sxx)2+sH2.(14)T = \frac{1}{(1+s_{xx})^2+s_H^2}, \qquad R = \frac{s_{xx}^2+s_H^2}{(1+s_{xx})^2+s_H^2}. \tag*{(14)}

Finally, the optical absorption coefficient reads

A=2sxx(1+sxx)2+sH2,(15)A = \frac{2s_{xx}}{(1+s_{xx})^2+s_H^2}, \tag*{(15)}

which vanishes with a vanishing σxx\sigma_{xx}. Now we can obtain TT, RR and AA as functions of the frequency-dependent parameter ζ\zeta by calculating the optical conductivities defined by Eqs. (7) and (8). With σ0=2ϵ0c\sigma_0=2\epsilon_0c we can write G0/σ0=πα/2G_0/\sigma_0=\pi\alpha/2 with α=e2/(2ϵ0hc)≈1/137\alpha=e^2/(2\epsilon_0hc)\approx1/137, also known as the fine-structure constant [18]. Thus, both dimensionless conductivities are proportional to the fine-structure constant, where the dimensionless Hall conductivity reads

sH=α4ζlog⁡∣1+ζ1−ζ∣,(16)s_H=\frac{\alpha}{4\zeta}\log\left|\frac{1+\zeta}{1-\zeta}\right|, \tag*{(16)}

and the dimensionless longitudinal conductivity is

sxx=πα2(1+ζ−2)Θ(ζ−1).(17)s_{xx}=\frac{\pi\alpha}{2}(1+\zeta^{-2})\Theta(\zeta-1). \tag*{(17)}

These general results can be reduced to some special cases. First, we consider sxx=0s_{xx}=0, where there is no absorption and the reflection is proportional to the transmission: T=1/(1+sH2)T=1/(1+s_H^2), R=sH2TR=s_H^2T and A=2sHTA=2s_HT. Second, for sH=0s_H=0 the absorption has a maximum at ζ=1\zeta=1 and decays slowly for ζ>1\zeta>1. On the other hand, for sH>0s_H>0 the absorption vanishes at ζ=1\zeta=1 and its maximum is just above ζ=1\zeta=1 (cf. Figure 2). Finally, for a vanishing gap (i.e., in the limit ζ→∞\zeta\to\infty) sHs_H vanishes and the coefficients read

Image not extracted

Figure 2. Transmission and absorption coefficients of a 2D material with a band gap 2m2m in the presence of the QAH effect and an incident electromagnetic wave with the scaled frequency ζ=ℏω/2m\zeta= \hbar\omega/2m.

T=1(1+πα/2)2,R=(πα/2)2(1+πα/2)2,A=πα(1+πα/2)2(18)T=\frac{1}{(1+\pi\alpha/2)^2}, \qquad R=\frac{(\pi\alpha/2)^2}{(1+\pi\alpha/2)^2}, \qquad A=\frac{\pi\alpha}{(1+\pi\alpha/2)^2} \tag*{(18)}

with 97.7% transmission, 2.3% absorption and almost no reflection was experimentally confirmed for graphene [14, 15]. This is a remarkable result, since it is constant in the frequency of the external field. Measuring TT provides a useful tool for determining the fine-structure constant experimentally.

Discussion and conclusion

As illustrated in Figure 2, there is no absorption for ζ<1\zeta< 1 due to sxx=0s_{xx} = 0, while the reflection almost vanishes for all ζ≠1\zeta\ne1 except for the singularity at ζ=1\zeta= 1, where it jumps to R=1R = 1 (cf. Figure 3). For ζ>1\zeta> 1 absorption appears due to sxx>0s_{xx} > 0 and decreases monotonically for larger values of the scaled frequency ζ\zeta. At the same time, the transmission is close to 100% for ζ<1\zeta< 1, jumps to T=0T = 0 at ζ=1\zeta= 1 and increases monotonically for ζ>1\zeta> 1, since the absorption decays slowly for higher frequencies. The absorption always exceeds the reflection but never the transmission, as illustrated in Figure 2.

Image not extracted

Figure 3. Singular behavior of the reflection coefficient of a 2D material with a band gap 2m2m in the presence of the QAH effect.

Turning off the Hall conductivity sHs_{H} does not change the optical behavior away from a very narrow region around ζ=1\zeta= 1. Thus, for ζ<1\zeta< 1 the 2D sheet is completely transparent, since sxx=0s_{xx} = 0 in this case, representing an ideal insulator in terms of quantum transport. On the other hand, for ζ>1\zeta> 1 all three coefficients jump to some nonzero value, reflecting that the 2D sheet becomes metallic. The transmission is above 97%, the absorption is less than 3% and the reflection is below 1%. With increasing frequency the transmission increases, while the reflection and the absorption decrease.

In conclusion, we found a remarkably simple behavior for the optical properties of a gapped 2D sheet. As a function of the frequency of the electric field, the properties are characterized by 100% transmission for ω<2m/ℏ\omega< 2m/\hbar and 97% transmission and 3% absorption for ω>2m/ℏ\omega> 2m/\hbar. This could be useful for a number of applications, in which the gap energy must be accurately determined by an optical probe.

References

  1. [1]C. Z. Chang, C. X. Liu, and A. H. MacDonald, Colloquium: Quantum anomalous Hall effect, Rev. Mod. Phys. 95, 011002 (2023).DOI
  2. [2]C.-Z. Chang, W. Zhao, D. Y. Kim, H. Zhang, B. A. Assaf, D. Heiman, S.-C. Zhang, C. Liu, M. H. Chan, and J. S. Moodera, High-precision realization of robust quantum anomalous Hall state in a hard ferromagnetic topological insulator, Nature Materials 14 (5), 473 (2015).
  3. [3]J. S. Dyck, P. Hájek, P. Lošťák, and C. Uher, Diluted magnetic semiconductors based on Sb₂₋ₓVₓTe₃ (0.01 < x < 0.03), Phys. Rev. B 65, 115212 (2002).DOI
  4. [4]Y. S. Hor, P. Roushan, H. Beidenkopf, J. Seo, D. Qu, J. G. Checkelsky, L. A. Wray, D. Hsieh, Y. Xia, et al, Development of ferromagnetism in the doped topological insulator Bi₂₋ₓMnₓTe₃, Phys. Rev. B 81, 195203 (2010).DOI
  5. [5]Y. Wang, B. Fu, Y. Wang, Z. Lian, S. Yang, Y. Li, L. Xu, Z. Gao, X. Yang, W. Wang, W. Jiang, J. Zhang, Y. Wang, and C. Liu, Towards the Quantized Anomalous Hall effect in AlOₓ-capped MnBi₂Te₄, Nat. Commun. 16, 1727 (2025).DOI
  6. [6]A. L. Sharpe, E. J. Fox, A. W. Barnard, J. Finney, K. Watanabe, T. Taniguchi, M. Kastner, and D. Goldhaber-Gordon, Emergent ferromagnetism near three-quarters filling in twisted bilayer graphene, Science 365 (6453), 605 (2019).DOI
  7. [7]T. Li, S. Jiang, B. Shen, Y. Zhang, L. Li, Z. Tao, T. Devakul, K. Watanabe, T. Taniguchi, L. Fu, et al, Quantum anomalous Hall effect from intertwined moiré bands, Nature 600 (7890), 641 (2021).DOI
  8. [8]Y. Wan, P.-H. Liu, and Q.-F. Sun, Quantum anomalous Hall effect in ferromagnetic metals, Phys. Rev. Lett. 135 (18), 186302 (2025).DOI
  9. [9]Z. Zhang, R. Li, Y. Bai, Y. Zhang, B. Huang, Y. Dai, and C. Niu, Quantum anomalous Hall effect in a nonmagnetic bismuth monolayer with a high Chern number, Mater. Horiz. 12, 3011 (2025).DOI
  10. [10]P. Nualpijit, A. Sinner, and K. Ziegler, Tunable transmittance in anisotropic two-dimensional materials, Phys. Rev. B. 97 235411 (2018).DOI
  11. [11]P. Nualpijit and B. Soodchomshom, Strain-tuned optical properties of a two-dimensional hexagonal lattice: Exploiting saddle degrees of freedom and saddle filtering effects, Micro and Nanostructures 216, 208694 (2026).DOI
  12. [12]A. Hill, A. Sinner, and K. Ziegler, Valley symmetry breaking and gap tuning in graphene by spin doping, New J. Phys. 13, 035023 (2011).DOI
  13. [13]P. Nualpijit and B. Soodchomshom, Control of valley optical conductivity and topological phases in buckled hexagonal lattice by orientation of in-plane magnetic field, Micro and Nanostructures 186, 207731 (2024).DOI
  14. [14]A.B. Kuzmenko, E. van Heumen, F. Carbone, and D. van der Marel, Universal Optical Conductance of Graphite, Phys. Rev. Lett. 100, 117401 (2008).pubmed.ncbi.nlm.nih.gov/18517825
  15. [15]R. R. Nair, P. Blake, A. N. Grigorenko, K. S. Novoselov, T. J. Booth, T. Stauber, N. M. R. Peres, and A. K. Geim, Fine Structure Constant Defines Visual Transparency of Graphene, Science 320, 1308 (2007).DOI
  16. [16]N. Ashcroft and N.D. Mermin, Solid State Physics. New York: Holt, Rinehart and Winston (1976).
  17. [17]K. Ziegler, Minimal conductivity of graphene: Nonuniversal values from the Kubo formula, Phys. Rev. B 75, 233407 (2007).DOI
  18. [18]A. Sommerfeld, Zur Quantentheorie der Spektrallinien, Annalen der Physik 4, 51 (1916).

Paper details

vlnc:W_mdte6n59
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 6

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents