WorksPhysics and Astronomy
A curvature-corrected port-Hamiltonian reduced-order model for dissipative sloshing with contact-line hysteresis in low-gravity tanks
Abstract
A physics-based reduced-order model unifies curved-meniscus inertia, viscous losses and nonsmooth contact-line stick-slip in a passive port-Hamiltonian formulation for lateral sloshing in cylindrical tanks. Dirichlet-Neumann and Jacobi operators describe inertia and restoring forces, while a convex potential combines bulk, Stokes-layer and contact-line dissipation. Analytical propagation between stick-slip events supports faster-than-real-time simulation of coupled spacecraft translation and sloshing. The viscous closure agrees within 5% with a reference Stokes calculation, and the model reproduces the Henderson-Miles modal measurements and the Cocciaro hysteretic decay. Across 42 drop-tower and ground measurements, curvature correction reduces the root-mean-square frequency error from 24 to 4%. For flight and ground tests from the Middeck 0-Gravity Dynamics Experiment (MODE), frequency errors range from 0.9 to 7.1%, while ideal contact lines underestimate the damping ratios from the MODE fits by 38-87%. One hysteresis width, calibrated on the lowest orbital water excitation, predicts higher orbital excitations and the ground test with normalised force errors of 11-35%, against 149-208% for an ideal pinned line. It predicts 8.5% resonance softening against 7.3% measured, which the tested one-parameter damping laws miss. Uncertain wetting and remaining response discrepancies motivate damping ranges in spacecraft control analyses.