betaFeedback

Reading v1View latest version

WorksPhysics and Astronomy

Experimental Evaluation of High-Throughput Structure Predictions

Abstract

High throughput computational databases such as Materials Project, the Open Quantum Materials Database, and Alexandria now each list on the order of 10^5 predicted stable compounds. However, the overall reliability of these predictions in terms of actual experimental synthesizability remains poorly understood. In this work we attempt to synthesize, via arc melting, 34 different predicted ternary compounds. The majority of these materials did not form in the predicted structure, instead resulting in disordered variants or multiphase mixtures. Four formed ordered structures not reported before, one of them at a composition reported earlier without a structure. We discuss both the failures and the successes, and identify simple filtering criteria that can help researchers avoid hypothetical materials that are unlikely to form.

Introduction

The discovery of new, functional materials such as high-TcT_\mathrm{c} superconductors, improved thermoelectrics, more efficient battery materials, materials for spintronics, etc, remains a central challenge in materials science [1, 2]. Historically, the synthesis of new materials has been driven by a combination of experimental expertise, trial and error, and serendipity [3]. Despite the long history of successes that has produced nearly all of the functional materials in use today, the empirical method of materials discovery is costly and slow [1, 4].

Computational methods have emerged as a promising alternative, predicting the stability of new materials and thereby guiding experimental discovery [1, 2]. In particular, advances in available computational resources have enabled high-throughput density functional theory (DFT) calculations to systematically determine the formation energies for large numbers of known and hypothetical crystal structures. This has given rise to material databases that now each list on the order of 10510^{5} predicted stable compounds [5, 6, 7]. In recent years, generative AI has facilitated the generation of even more new crystal structures, while machine-learning (ML) models have reduced the computational cost of evaluating predicted structures. Together, these advances have drastically expanded the scale of computational materials discovery [8, 9, 10]. As a result, there now exist open materials databases such as Materials Project (MP), Open Quantum Materials Database (OQMD), and Alexandria containing millions of hypothetical structures [11, 12, 13].

Based on the abundance of candidate materials in these open databases, an enormous and wide-ranging effort has been undertaken to apply high-throughput computational screening methods to search for materials with desired properties. For example, structures taken from large materials databases have been screened for superconductivity [14, 15, 16, 17, 18], magnetic and topological order [19, 20, 21, 22, 23, 24, 25], and altermagnetic spin splitting [26, 27, 28]. Experimental groups have likewise invested considerable time and effort attempting to synthesize and characterize individual candidates predicted to have promising properties. While this effort has undoubtedly produced interesting materials, many of the compounds studied had already been reported as experimentally realized and are simply being characterized in a new way [29, 30].

A DFT calculation predicts an ordered crystal structure, but in the compound that forms, two or more elements can mix on one crystallographic site, producing compositional disorder. Leeman et al. [31] argue that such a disordered compound is a different material from the predicted compound, and that a claim of a new material should state how it differs from materials already known. In this paper, we count a prediction as a success only when the predicted ordered structure formed and the compound had not been reported before.

Most of the compounds that Gautier et al. [32] predicted and then attempted meet this standard. They restricted their search to one chemical family, the 483 ternary ABX compositions with 18 valence electrons per formula unit, 400 of them unreported. For each ternary system they computed the energies of the reported phases together with hypothetical phases constructed by analogy with reported isovalent compounds. Of the 16 predicted-stable compounds they attempted by arc melting and annealing, 15 formed in the predicted ordered structure, at compositions that had not been reported in the experimental literature.

Other studies that tested a list of predictions found far fewer successes. Narayan et al. [33] took a similar per-system approach to sulfides and selenides with no known ternary compounds, and none of the 15 candidates they attempted formed. In oxides, Montoya et al. [34] found new compounds in only one of six predicted ternary systems, and not the predicted ones, and Walters et al. [35] obtained only one of the cation substitutions into Na4TiP2O9\mathrm{Na}_{4}\mathrm{TiP}_{2}\mathrm{O}_{9} predicted to lie near the hull. Gautier et al. [32] and these three groups all computed their own hulls, whereas most screening studies take their candidates from the hull energies stored in public databases. One possible explanation for the success of Gautier et al. [32] is that their targets came from a chemical family in which chemical intuition about stable compounds is well developed [30].

Few experiments have tested, across many ternary systems, how often a never-reported compound listed on or near the database hulls forms. To our knowledge, the success rate of the largest experimental test of database predictions has been disputed. Szymanski et al. [36] reported 41 new compounds from 58 targets that lie on or near the MP hull and were cross-checked against a similar database from Google DeepMind. Leeman et al. [31] reexamined the diffraction data and concluded that none were new. In their analysis, about two thirds of the reported compounds were more likely known, disordered versions of the predicted ordered compounds, and most of the rest had been reported before. Other groups reached similar conclusions [37, 38]. In a correction, Szymanski et al. [39] revised the count to 36 of 57. They clarified that the targets were new to their prediction platform, and that partially disordered versions of a target were counted as successes. Their definition of success is therefore less strict than the one we use in this study.

Later studies have run into the same difficulties with compositional disorder and with compounds that had already been reported. Prein et al. [40] report the synthesis of 7 of 16 database targets, but they claim that six of the seven had been reported before. A disordered form of TaCr2O6\mathrm{TaCr}_{2}\mathrm{O}_{6} proposed by a generative model [9] had already been synthesized in 1971 [41]. With powder X-ray diffraction (XRD), compositional disorder can be judged only by fitting both ordered and disordered models to the data, and a compound missing from the Inorganic Crystal Structure Database (ICSD) [42] may still have been reported in the literature.

In this work, we address the question of the reliability of current high-throughput structure predictions by attempting the synthesis of 34 candidate materials taken from MP, OQMD, and Alexandria databases. The chosen materials were reported to lie on or very close to the convex hull, and all are suitable for arc melting. We chose arc melting because it is inexpensive, fast relative to other synthesis methods such as solid state synthesis which involves repeated re-grinding and firing, and avoids the experimental complexity and trial and error that accompany growth methods like flux growth or chemical vapor transport.

Three of the compounds we attempted, GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}, TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} and ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si}, formed an ordered on-hull structure and had not been reported before. A fourth, YCoSi3\mathrm{YCoSi}_{3}, crystallized in a structure not reported before, although the composition was reported in 1974 [43]. From the XRD data we also identify several recurring ways in which the predicted structures fail to form. Our work highlights important limitations in current high-throughput materials discovery and serves as a guide to researchers on how to identify materials with a greater chance of being experimentally realizable.

Results

We arc melted 34 ternary compositions that OQMD, MP or Alexandria lists as stable or close to stable, and characterized each sample by powder XRD and Rietveld refinement (Figure 1 and Supplementary Section S7). The targets come from three candidate lists (Methods). List A contains entries on or near the MP and OQMD hulls in ternary systems with no reported ternary compound, and List B contains entries on the OQMD hull in systems with exactly one ternary compound. List C contains entries on the Alexandria PBEsol hull that the disorder model described below predicts to be ordered.

Representative XRD patterns with Rietveld fits

Figure 1. Representative XRD patterns with Rietveld fits. Crosses show the measured pattern minus the fitted background, the red line the fit, the blue line the difference, and the tick rows the Bragg positions of each phase (green for the target phase), with the refined weight fractions. Each drawing shows one unit cell of the phase that formed. Annealed samples were held at 1000 °C for one week and measured on a zero-background slide. (a) GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}, annealed. A new compound in the PnmaPnma structure that is the lowest-energy structure at this composition in Alexandria, not the CmcmCmcm structure predicted by OQMD. (b) TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si}, annealed. A new compound in the predicted P4/mmmP4/mmm structure, 91 wt% of the sample. (c) ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si}, annealed. A new compound in the predicted P4/mmmP4/mmm structure, 97 wt% of the sample. (d) YCoSi3\mathrm{YCoSi}_{3}2, annealed. A nearly single-phase CmmmCmmm polymorph, 8 meV/atom above the predicted on-hull I4mmI4mm structure. (e) YAl3Cu2\mathrm{YAl}_{3}\mathrm{Cu}_{2}3, annealed. Al and Cu mostly occupy their predicted sites. Lines of an unidentified phase are marked (▽), so no weight fractions are given, and the difference curve is scaled by 0.2. (f) Hf2MoIr\mathrm{Hf}_{2}\mathrm{MoIr}, annealed. A disordered parent of the predicted structure, bcc with partial Hf order (88 wt%), with Ti2_2Ni-type Hf2Ir\mathrm{Hf}_{2}\mathrm{Ir} (12 wt%). The pattern simulated from the OQMD prediction (L21L2_{1}, Fm3ˉmFm\bar{3}m, purple) has a Mo/Ir superlattice line at 23.6° that is absent from the data (inset). Triangles mark unindexed lines. The gray band marks the range shown in the inset.

Following Gautier et al. [32], we describe the predicted stability of each target by ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x), the energy of its lowest structure relative to the hull of all other compositions in its ternary system (Table I and Methods). This is the quantity OQMD lists as the “stability” of an entry. A negative value means that the structure is predicted to be stable by that margin. In assigning outcomes, we count a target as having formed an on-hull structure if the structure that formed is the lowest-energy structure in at least one database that places it below the hull. Since the databases do not always agree, a composition can have more than one such structure. We also give PdisorderP_{\mathrm{disorder}}, the probability that two or more elements share a crystallographic site, which the model of Jakob et al. [44] predicts from the chemical composition alone (Methods).

Table I sorts the targets into six outcomes, judged from the best-characterized pattern of each (Methods). Targets that formed at their own composition adopted either an on-hull structure or an above-hull polymorph. The others formed a disordered parent of the on-hull structure or some other solid solution, separated into other phases (multiphase), or formed phases we could not identify (unresolved).

New compounds and structures

GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}, TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} and ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si} formed on-hull structures, and we found no earlier report of any of these compounds in the literature. Each of these compounds is more than 90 wt% of its sample after one week at 1000 °C (Methods).

GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge} formed the YPd2Si\mathrm{YPd}_{2}\mathrm{Si}-type PnmaPnma structure, which is the lowest-energy structure at this composition in Alexandria. The PnmaPnma structure is not the lowest-energy one in OQMD, the database from which we selected the target, where a CmcmCmcm structure is lowest. After annealing, GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge} is 94 wt% of the sample, and the

Table 1. Arc-melted targets grouped by XRD outcome category, ordered within a category by decreasing PdisorderP_{\mathrm{disorder}}. The outcome is from the best-characterized scan (after annealing where stated). List: candidate list the target came from (A, B or C; the lists are described in Methods). ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x): energy of the lowest entry at the target composition relative to the convex hull C(x)C(x) of all other compositions [32] in OQMD, the Materials Project (MP) and Alexandria (PBE), in meV/atom; negative means predicted stable, blank means no entry. PdisorderP_{\mathrm{disorder}}: predicted probability of a chemically disordered structure [44]. A structure is on the hull if it is the lowest-energy structure in at least one database that places it below the hull. *: structure previously reported at the target composition; †: composition reported without a structure; ‡: predicted ordered member of a previously reported series whose known member has the same sites partly disordered.

#FormulaListOQMDMPAlex.PdisorderP_{\mathrm{disorder}}XRD outcome
On-hull structure
1ZrPt₅SiB-41.8-41.8-21.50.20On-hull ZrPt₅Si, 97 wt% after anneal (ZrPt₃ 3 wt%); new compound
2YAl₃Cu₂‡C-10.8-3.00.18Predicted Al/Cu order on the CaCu₅ lattice (order parameter 0.7 after anneal); La₃Al₁₁-type Y₃(Al,Cu)₁₁ and unidentified lines
3GdPt₂GeB-32.5-25.40.18YPd₂Si-type Pnma (lowest in Alexandria), 94 wt% after anneal, small oxide fraction; OQMD Cmcm structure absent; new compound
4TiPt₅SiB-16.5-25.60.18On-hull TiPt₅Si, 91 wt% after anneal; new compound
5YSnCu*C-69.1-69.0-69.60.15On-hull LiGaGe-type YSnCu formed; previously known compound
6ScCrC₂*C-10.026.126.80.05On-hull P6₃/mmc ScCrC₂, nearly single phase (about 95 wt%); previously known
Above-hull polymorph
7YCoSi*C-42.916.9-31.10.13Known Pnma YCoSi polymorph (+32 meV) formed, textured; not the on-hull P4/nmm structure
8YCoSi₃†C-17.3-14.90.01Cmmm polymorph (+8 meV), nearly single phase after anneal; on-hull I4mm structure absent
Disordered parent of on-hull structure
9Al₈FeCo₇B-3.412.10.92B2 Al(Fe,Co), Al ordered (η\eta 0.9); Fe/Co order undetermined
10Hf₂MoIrA-12.0-9.13.70.90bcc Hf-Mo-Ir after anneal, partial Hf order; Mo/Ir order absent; Ti₂Ni-type Hf₂Ir 12 wt%
11Al₄FeCo₃B-6.5-3.20.89B2 Al(Fe,Co), Al ordered (η\eta 0.9); Fe/Co order undetermined
12Sc₂PdCuA4.8-1.3-0.70.89B2 Sc(Cu,Pd), Sc ordered; Heusler Cu/Pd order absent; cut-face scan
13Sc₃Pd₂CuA-3.04.90.88B2 Sc(Cu,Pd) after anneal, Sc ordered; Cu/Pd layer order of the on-hull structure absent
14ScPd₅Au₂A2.89.90.81fcc (Sc,Pd,Au) solution; Pbam order absent in range; bulk scan
15Al₂MnAu₂B-0.63.20.62C11b Au₂(Al,Mn), partial Au order; Mn/Al order undetermined
16Sc₂Pd₅AuA-9.6-12.9-34.70.60L1₂ Sc(Pd,Au)₃; Pbam Pd/Au order absent
17PtNiGe₂B-5.817.90.51MnP-type (Ni,Pt)Ge, parent of the on-hull structure, Ni/Pt order absent; pattern unresolved
18Gd₃Sn₆Co*B-25.10.24Known CeNiSi₂-type GdCoₓSn₂; Co ordering of the on-hull structure absent
Other solid solution
19ScPd₂AuA6.42078.0-4.70.56Hexagonal Sc(Pd,Au)₃ majority; fcc-stacked Sc(Pd,Au)₃ minority is the L1₂ parent of the on-hull structure
20ScPdCu₄A-24.23.90.25Cu-type fcc, near pure Cu; unidentified partner; on-hull structure absent
Multiphase, on-hull structure not formed
21ScPd₂CuA17.733.24.80.75fcc-derived Sc(Cu,Pd)₃-type plus hexagonal phase; compositions undetermined
22La₅Al₃Co₂B-0.70.75Known La₄Co₃Al₃ majority; on-hull structure not identified, minority up to ∼10 wt% not excluded
23TiPt₅GeB-18.8-34.00.20Pt + Fe₂P-type Pt₂Ge, no Ti-bearing phase identified; on-hull structure absent
24Ti₂Pt₈SiB-4.890.40.19TiPt₅Si-type and Pt-rich fcc phase formed; on-hull structure absent
25LaNiSi₃C-24.7-5.20.07Multiphase, known compounds; on-hull structure absent
26GdSn₆Co₄B-4.1-11.20.04Multiphase, known compounds, GdCo₆Sn₆ the largest; on-hull structure absent
27NbNi₂B₂C12.123.00.03Multiphase: Ni₃B, NbB₂, τ-boride Nb₂Ni₂₁B₆; on-hull structure absent
28GdFeGe₂B0.2-6.30.01Two known phases and two minor ones; on-hull structure absent
29Gd₂Fe₃Ge₅B-8.60.01Multiphase, four known phases; on-hull structure absent
30GdFeGe₃B-19.0-30.60.01Multiphase, three known phases; on-hull structure absent
31LaRuC₂C0.928.30.00La-Ru binaries, graphite and an unidentified phase; on-hull structure absent
On-hull structure did not form but structure(s) unresolved
32Pd₆Cu₅GeA-19.6-15.90.93Not Cmcm; B2-type when measured on a cut face, broad fcc after grinding; unresolved
33La₂PdAu₂A-0.811.90.88Not the on-hull structure; multiphase, no phase identified
34Ti₂Pt₈GeB-3.9-45.4103.00.26Pt-rich fcc-type phase plus unidentified lines; on-hull structure absent

remaining 6 wt% is likely Gd2O3\mathrm{Gd_2O_3} (Figure 1a).

TiPt5Si\mathrm{TiPt_5Si} and ZrPt5Si\mathrm{ZrPt_5Si} formed the predicted P4/mmmP4/mmm structure, which is the lowest-energy structure in every database that lists these compositions. After annealing, TiPt5Si\mathrm{TiPt_5Si} is 91 wt%, of its sample, with the rest an fcc phase, and ZrPt5Si\mathrm{ZrPt_5Si} is 97 wt%, with 3 wt% ZrPt3\mathrm{ZrPt_3} (Figure 1b,Figure 1c). All three compounds were already identifiable in the as-cast buttons. As cast, GdPt2Ge\mathrm{GdPt_2Ge} was already the main phase, and annealing raised the fractions of TiPt5Si\mathrm{TiPt_5Si} and ZrPt5Si\mathrm{ZrPt_5Si}. Supplementary Fig. S1 compares the as-cast and annealed fits.

The composition YCoSi3\mathrm{YCoSi_3} was listed in a 1974 study of the Y–Co–Si system, which gave the structures of the other ternary compounds of that system but not of YCoSi3\mathrm{YCoSi_3} [43]. Our sample formed a CmmmCmmm structure of the SmNiGe3_3 type, 8 meV/atom above the predicted I4mmI4mm structure in OQMD, and is therefore an above-hull polymorph. After annealing, the pattern is fitted by the CmmmCmmm phase alone (Figure 1d). To our knowledge, this is the first structure reported for YCoSi3\mathrm{YCoSi_3}.

YAl3Cu2\mathrm{YAl_3Cu_2} formed the predicted CaCu5_5-type structure, in which Al fills the 3g site and Cu the 2c site (Figure 1e). Al and Cu mostly occupy their predicted sites, and a model with Al and Cu distributed at random fits clearly worse (Supplementary Section S7). The same structure type is known in the Y–Al–Cu system at a different composition, YAl2Cu3\mathrm{YAl_2Cu_3} [45]. In a single crystal of YAl2Cu3\mathrm{YAl_2Cu_3}, Kadir et al. [46] found Cu alone on the 2c site and Al and Cu sharing the 3g site, the same site preference as in the prediction. Lines of an unidentified phase remain in the pattern, so we do not quote weight fractions. YAl3Cu2\mathrm{YAl_3Cu_2} is a nearly ordered compound in the predicted structure at a composition not reported before, but its structure type was already known in this system at a different composition.

Previously reported compounds

YSnCu\mathrm{YSnCu}, ScCrC2\mathrm{ScCrC_2} and YCoSi\mathrm{YCoSi} formed compounds that had been reported before [47, 48, 49] (asterisks in Table I). In selecting targets, we screened out reported compounds mainly through the databases themselves (Methods). YSnCu\mathrm{YSnCu}, for example, is in the ICSD, but MP labels its entry “theoretical” [12], so the database flags for experimentally observed compounds are not complete. We found the papers reporting these three compounds, and the 1974 paper listing the composition YCoSi3\mathrm{YCoSi_3} [43], only in a later and more thorough search of the literature. YSnCu\mathrm{YSnCu} and ScCrC2\mathrm{ScCrC_2} formed the on-hull structure, YSnCu\mathrm{YSnCu} as 90 wt% of its sample and ScCrC2\mathrm{ScCrC_2} nearly single phase (about 95 wt%). YCoSi\mathrm{YCoSi} formed its known PnmaPnma structure, 32 meV/atom above the predicted P4/nmmP4/nmm structure, as 75 wt% of its sample, and is therefore an above-hull polymorph.

Disordered parents of the on-hull structure

Ten targets formed a solid solution derived from the on-hull structure in which two or more elements mix on a site (Table I). We assign this category when the pattern matches a disordered parent and the order that distinguishes the on-hull structure is absent or cannot be determined. We judge this from refinements of ordered and disordered models of each target and from the superlattice lines that only the ordered structure produces. Figure 1f shows annealed Hf2MoIr\mathrm{Hf_2MoIr}, whose main phase is a bcc cell in which Hf partly orders onto the cube corners while Mo and Ir share the other site. In the pattern simulated from the predicted L21L2_1 structure, the order of Mo and Ir produces a (111) line near 23.6°, and this line is absent from the data (Figure 1f, inset). The remaining 12 wt% of the sample is likely a Ti2Ni\mathrm{Ti_2Ni}-type Hf2Ir\mathrm{Hf_2Ir} phase.

For three targets, our fits cannot distinguish the disordered parent from the on-hull structure. The patterns of Al8FeCo7\mathrm{Al_8FeCo_7} and Al4FeCo3\mathrm{Al_4FeCo_3} are fitted by a B2 cell with Al on one site and Fe and Co sharing the other, and the predicted structures differ from this disordered model only in how Fe and Co are arranged. Because Fe and Co differ by one in atomic number, the superlattice lines of Fe/Co order would have at most 0.04% of the intensity of the strongest line with Cu Kα\alpha radiation, and the ordered and disordered models fit equally well (Supplementary Section S7). In Al2MnAu6\mathrm{Al_2MnAu_6}, the predicted C2/mC2/m structure and its C11bC11_b parent, in which Al and Mn share a site, also fit the pattern equally well. We list all three as disordered parents, but each could equally be the on-hull structure, and the split symbols in Figure 2 mark both possibilities.

Figure 2. PdisorderP_{\mathrm{disorder}} versus ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x) in OQMD [11, 50] for the 34 targets of Table I. Green circles: the predicted structure formed (filled: on-hull structure, the lowest-energy structure in at least one database that places it below the hull; open: above-hull polymorph). Blue squares: a solid solution formed (filled: disordered parent of the on-hull structure; open: other solid solution). Dark gray triangles: the on-hull structure did not form (filled: multiphase; open: unresolved). A split symbol marks a sample whose data allow two categories that the data cannot distinguish. ∗^*, †^\dagger and ‡^\ddagger as in Table I. Red X: every structure below the hull in any of the three databases is dynamically unstable (Methods). Dashed line: ΔHf−C(x)=0\Delta H_{\mathrm{f}} - C(x) = 0.

Other outcomes

ScPd2Au\mathrm{ScPd_2Au} and ScPdCu4\mathrm{ScPdCu_4} formed solid solutions whose structures are not derived from the on-hull structure (Supplementary Section S7).

Eleven targets separated into several phases, none of which is the on-hull structure. In most of them, the phases we could identify are previously reported compounds. For example, GdFeGe3\mathrm{GdFeGe_3} separated into three known phases (Supplementary Section S7). The pattern of ScPd2Cu\mathrm{ScPd_2Cu} can also be fitted by a disordered parent of the on-hull structure, so its split symbol in Figure 2 shows both multiphase and disordered parent.

In Pd6Cu5Ge\mathrm{Pd_6Cu_5Ge}, La2PdAu2\mathrm{La_2PdAu_2} and Ti2Pt8Ge\mathrm{Ti_2Pt_8Ge}, the lines of the on-hull structure are absent, but we could not identify the phases that formed. Supplementary Section S7 gives further details.

Discussion

Figure 2 plots, for every target, the two quantities that can be evaluated before synthesis: the disorder probability PdisorderP_{\mathrm{disorder}} and the margin below the hull, ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x) (with the OQMD values). The symbols mark the outcome categories of Table I. A split symbol marks a target whose data allow two categories, such as the three compositions for which ordered and disordered models fit equally well. Crosses mark targets whose structures below the hull are all dynamically unstable (Methods). The disorder probability PdisorderP_{\mathrm{disorder}}, from the model of Jakob et al. [44], is the predicted probability that a compound of the target composition has two or more elements sharing a site.

The targets that formed an on-hull structure or an above-hull polymorph cluster in the lower left of Figure 2, where PdisorderP_{\mathrm{disorder}} is low and the target lies below the hull, and they lie further below the hull than most of the targets that did not form. None of the 14 targets with Pdisorder>0.5P_{\mathrm{disorder}} > 0.5 formed, and 9 of them gave a disordered parent of the on-hull structure instead. These 14 come from Lists A and B, which were not pre-screened on PdisorderP_{\mathrm{disorder}}.

Gautier et al. [32] chose their targets by an electron count of 18 per formula unit and a large computed margin below the hull, and most of the compounds they attempted formed in the predicted ordered structure. Their six single-phase products lie at least 130 meV/atom below the hull they computed, about five times the median margin of the eight targets that formed in this study. Their products also mostly have a low disorder probability in the model of Jakob et al. [44], below 0.2 for 10 of the 15. Their selection therefore favored the same two properties that distinguish the targets that formed in this study.

About half of the entries in the ICSD contain some form of site disorder [44, 51], whereas the database hulls are built from ordered cells at 0 K. Configurational entropy favors a disordered phase at high temperature [29], and when an arc-melted button is quenched from high temperature, the disorder can be retained. After a week at 1000 ∘C1000\,^{\circ}\mathrm{C}, the predicted order was still absent in Hf2_2MoIr and Sc3_3Pd2_2Cu. In these two, the disordered phase may be stable at 1000 ∘C1000\,^{\circ}\mathrm{C}, with any ordering transition below that temperature, where diffusion is slow. Otherwise, the predicted order is either not stable at any temperature or did not form within a week. Since PdisorderP_{\mathrm{disorder}} is predicted from the composition alone, it does not say which elements will share a site. Predicting which elements share which sites in the predicted structure can be computationally intensive [52, 53].

A sample that decomposes into several phases implies that the hull was incomplete, that errors in the computed energies were large enough to place an unstable composition on or below it [54], or that temperature or kinetics, which the 0 K hull leaves out, decided the outcome. For Ti2_2Pt8_8Ge and Ti2_2Pt8_8Si, OQMD and Alexandria list different lowest-energy predicted structures against the same competing phases, and their values of ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x) differ by about 100 meV/atom, so at least one of the two values is wrong. More generally, of the 31 targets listed in more than one database, 14 lie below the hull in one database and above it in another (Table I).

We also calculated the phonon spectra of the low-energy structures at each target composition with the MatterSim 5M model [55, 56, 57, 58] (Methods). In YCoSi3_3, the predicted I4mmI4mm structure has imaginary phonon modes, while the CmmmCmmm polymorph that formed, about 8 meV/atom higher in OQMD, has none. In YCoSi, however, both the predicted P4/nmmP4/nmm structure and the known PnmaPnma structure that formed are dynamically stable, so for YCoSi the phonon calculations do not predict which structure forms. For eight targets, every structure below the hull is dynamically unstable, and none of these eight formed. Four of them separated into other phases, including LaNiSi3_3 and GdFeGe3_3, despite having a low PdisorderP_{\mathrm{disorder}} and lying well below the hull.

Summary and outlook

In our study of 34 predicted compounds, taking entries on or near the hulls of OQMD, MP and Alexandria without further criteria rarely gave the predicted compound. Only 8 of the 34 formed an on-hull structure or an above-hull polymorph, and 3 of these had already been reported experimentally.

Eleven targets have Pdisorder<0.2P_{\mathrm{disorder}} < 0.2, lie below the OQMD hull and are dynamically stable. Eight of these formed, and none of the other 23 did. Applying these criteria requires no new DFT calculations. Combined with practical requirements, such as suitability for arc melting or another synthesis route, criteria of this kind can raise the predictive value of these databases.

Even by a strict standard, counting only ordered compounds whose composition had not been reported at all, this approach found three new materials, GdPt2_2Ge, TiPt5_5Si and ZrPt5_5Si, and it gave the first reported structure of YCoSi3_3.

The hulls of the large databases are the first stage of a larger effort in materials discovery. A full prediction would treat each system at finite temperature, as a CALPHAD assessment does [59], with the liquid, the solid solutions and any order–disorder transitions [29, 60]. Such assessments are not yet practical across the whole of chemical composition space. Both the database hulls and CALPHAD assessments rest on the candidate structures computed for each system, and both will improve as more of these are computed. In the meantime, the predictions need experimental tests on many more targets than the 34 in this study. Since most models, including the disorder model we used, are trained on compounds that have already been made, the strongest tests are on compositions that have never been examined [41]. Reporting the failures of such tests along with the successes [61] would let each attempt improve the hulls and show which criteria accurately predict experimental synthesizability.

Methods

The database releases we used and the dates on which we retrieved data are recorded in the project repository [62].

Candidate selection

The 34 targets come from three lists, each based on a rough idea, at the time of selection, of what might raise the chance that a predicted compound forms. We give the criteria to show how the targets were chosen. List A contains ternary entries of MP and OQMD within 100 meV/atom of the hull, in systems that have reported binary compounds on two of the three binary edges but no reported ternary compound in the Materials Platform for Data Science (MPDS) [63], and so might hold undiscovered compounds. List B contains entries that OQMD listed on the hull at the time of selection, in systems with binary compounds on all three edges and exactly one reported ternary compound, which we expected to make the hull more reliable. List C contains ternary compounds on the PBEsol hull of the Alexandria subset computed by Gao et al. [64], with Pdisorder<0.2P_{\mathrm{disorder}} < 0.2 to avoid disordered products. From this list we removed compositions at which OQMD has an entry computed from an ICSD record, compounds containing radioactive or toxic elements (Tc, Pm, Th, Pa, U, Np, Pu, Tl and Ac), and the magnetic rare earths Ce to Yb. Three List C targets, LaRuC2_2, NbNi2_2B2_2 and ScCrC2_2, came from a parallel selection with the same filters that also required a predicted superconducting transition temperature above 2 K in the same data set. All targets had to contain elements we had on hand and be suitable for arc melting.

Hull energies

We used OQMD [11, 50], MP [12] and the PBE release of Alexandria [7, 13]. For each target and database, we built the convex hull of every entry in the ternary system and its binary and elemental subsystems, excluding entries at the target composition, with pymatgen [65]. We then subtracted the hull energy at the target composition from the formation energy of the lowest-energy entry there.

Supplementary Table S2 gives the values for all three databases. Three List C targets that lie on the PBEsol hull used for their selection lie 23 to 28 meV/atom above the Alexandria PBE hull.

Disorder probability

We evaluated PdisorderP_{\mathrm{disorder}} with the trained classifier released by Jakob et al. [44]. The model is a recurrent neural network that takes only the chemical composition as input and returns the probability that a compound of that composition has substitutional disorder. Because it uses no structural information, it gives one value per composition, regardless of the structure a database predicts.

Dynamical stability

We tested the dynamical stability of every OQMD, MP and Alexandria PBE entry at the 34 target compositions that lies within 50 meV/atom of the hull of the other compositions, 134 entries in 84 distinct structures. We followed the protocol of the PhononBench benchmark [56], with the MatterSim universal interatomic potential (MatterSim-v1.0.0-5M) [55] and phonopy [57, 58]. Each structure was relaxed with the FIRE algorithm, with the cell and atomic positions free and the space group fixed, until the residual forces fell below 0.005 eV/Å. Force constants were computed from displacements of 0.01 Å in a 2×2×22 \times2 \times2 supercell of the primitive cell and then symmetrized. A structure was counted as dynamically unstable if any phonon frequency along a high-symmetry path through the Brillouin zone fell below −0.1 THz. A target is marked by a cross in Figure 2 if every structure with ΔHf−C(x)<0\Delta H_f - C(x) < 0 in any of the three databases is dynamically unstable.

Synthesis

Samples were melted under Ar in an Edmund Bühler MAM-1 compact arc melter. Air-sensitive elements (Sc, Y, La, Gd and Mn) were cleaned and weighed first, and kept in the transfer chamber of an Ar-filled glovebox while the other elements were weighed, to limit oxidation. Bulk pieces of the elements were melted together.

Powdered Nb was first pressed into a pellet in a hydraulic press and premelted. Each button was melted three to five times, for 15–30 s each time, and flipped between melts. Mass loss was generally below 2%, and the value for each sample is given in the data repository [62]. Some compositions were made multiple times to correct an error in the weighed stoichiometry or to reduce the mass loss. The repository records each remake and its reason. Where a composition was measured more than once, as cast, after annealing or as a second sample, Table I reports the outcome from the pattern whose phases we could identify most completely.

Annealing

Samples to be annealed were wrapped in Ta foil, sealed in silica tubes under Ar, held at 1000 °C for one week and quenched in water. Table I states where an outcome comes from an annealed sample, and the Supplement lists every annealed sample and shows the patterns before and after annealing for the three new compounds.

X-ray diffraction and phase identification

All patterns were measured with Cu Kα radiation, most of them on a Siemens D500 diffractometer, from samples ground or filed to powder and fixed with silicone grease or petroleum jelly on a zero-background Si slide or on a poly(methyl methacrylate) slide. Two were measured on bulk pieces on a PANalytical X’Pert MPD, and one on a bulk piece on the D500. The Supplement gives the mounts, scan ranges and instrumental line profile. We first identified the phases by hand in MDI JADE against the PDF-5+ 2026 database [66], with the predicted structures added. We then repeated the identification with an automated pipeline of search-match and Rietveld refinement (Supplementary Section S2). The automated search compared each pattern with reported structures from the PDF-5+ database and the Crystallography Open Database [67], and with every entry of OQMD, MP and Alexandria in the ternary system, the predicted structures included. We added a fully disordered version of every ordered structure, and random fcc, bcc and hcp cells, in which two or more elements share a site. Candidate combinations of phases were ranked by how well they matched the pattern, by their energy above the hull and by whether their weight fractions were consistent with the nominal composition. The most plausible combinations were refined by the Rietveld method [68] in GSAS-II [69], where the data allowed, with a long-range order parameter η\eta that is 1 for the predicted order and 0 for a random distribution. A target was placed in the on-hull or polymorph category when the phase at the target composition was the largest phase in the refinement. For each target we compared the refinements of ordered and disordered models and of competing comcombinations, and the Supplement gives these comparisons for every sample. The search-match code is deposited, but not its library of PDF-5+ cards. Every fit of record starts only from structures in OQMD, MP, Alexandria and the Crystallography Open Database, from cells we built, and from six structures entered from their publications. The GSAS-II project files of the fits of record are deposited with the data [62].

Use of AI tools

We used Claude (Anthropic) throughout the project, in the versions Opus 4.6, Opus 5.5, Fable 5.1 and Sonnet 5.5 as they became available. Claude helped write the analysis code in the project repository [62], ran and reviewed refinements according to our instructions, searched the literature and checked references. We wrote the main text by hand, and Claude drafted and suggested revisions to passages of it. After our first identification of the phases by hand, Claude made a further assessment of each sample, which we critiqued sample by sample. Claude revised the assessment in response, and we repeated this cycle until we judged the conclusions to be supported by the data. Claude then drafted the per-sample descriptions in the Supplement from these conclusions, and we revised them through the same cycle of critique and revision. We directed each task, checked the code and its output against the measured data, made all final choices of structural model, fit and interpretation, and take full responsibility for the content.

Data availability

The data of this study and the analysis code are publicly available: https://doi.org/10.5281/zenodo.19685017.

Code availability

The code for the search-match, the Rietveld fits, the figures and the tables of this work is available at https://doi.org/10.5281/zenodo.19685017.

Funding Declaration

This work was supported by the National Science Foundation under award DMR-2522891.

Author contributions

G.R.S., B.G., R.G.H., P.J.H. and J.J.H. conceived the project. G.D.D., J.G., J.N., J.E., M.C., T.M., J.S.K. and G.R.S. synthesized the samples, and M.C. annealed them. G.D.D., J.S.K. and G.R.S. collected the XRD data, and G.D.D., M.J., Z.L. and J.J.H. analyzed them. P.P. and A.V. contributed the disorder-model and dynamic-stability calculations and advised on the use of the databases. J.J.H. developed the analysis code. G.D.D. and J.J.H. wrote the manuscript, and all authors reviewed it.

Competing interests

The authors declare no competing interests.

Additional information

Correspondence and requests for materials should be addressed to James J. Hamlin.

References

  1. [1]S. Curtarolo, G. L. W. Hart, M. B. Nardelli, N. Mingo, S. Sanvito, and O. Levy, The high-throughput highway to computational materials design, Nature Materials 12, 191 (2013).DOI
  2. [2]A. R. Oganov, A. G. Kvashnin, and G. Saleh, Computational materials discovery: Dream or reality?, in Computational Materials Discovery (The Royal Society of Chemistry, 2018) pp. 1–14.
  3. [3]P. Gražič, Discovery by serendipity: a new context for an old riddle, Foundations of Chemistry 11, 33 (2009).DOI
  4. [4]K. Shahzad, A. I. Mardare, and A. W. Hassel, Accelerating materials discovery: combinatorial synthesis, high-throughput characterization, and computational advances, Science and Technology of Advanced Materials: Methods 4, 2294826 (2024).DOI
  5. [5]J. Shen, S. D. Griesemer, A. Gopakumar, B. Baldassarri, J. E. Saal, M. Aykol, V. I. Hegde, and C. Wolverton, Reflections on one million compounds in the Open Quantum Materials Database (OQMD), Journal of Physics: Materials 5, 031001 (2022).DOI
  6. [6]M. K. Horton, P. Huck, R. X. Yang, J. M. Munro, S. Dwaraknath, A. M. Ganose, R. S. Kingsbury, M. Wen, J. X. Shen, T. S. Mathis, A. D. Kaplan, K. Berket, J. Riebesell, J. George, A. S. Rosen, E. W. C. Spotte-Smith, M. J. McDermott, O. A. Cohen, A. Dunn, M. C. Kuner, G.-M. Rignanese, G. Petretto, D. Waroquiers, S. M. Griffin, J. B. Neaton, D. C. Chrzan, M. Asta, G. Hautier, S. Cholia, G. Ceder, S. P. Ong, A. Jain, and K. A. Persson, Accelerated data-driven materials science with the Materials Project, Nature Materials 24, 1522 (2025).DOI
  7. [7]T. Cavignac, J. Schmidt, P.-P. De Breuck, A. Loew, T. F. T. Cerqueira, H.-C. Wang, A. Bochkarev, Y. Lysogorskiy, A. H. Romero, R. Drautz, S. Botti, and M. A. L. Marques, AI-driven expansion and application of the Alexandria database, Journal of Physics: Materials 9, 025014 (2026).
  8. [8]A. Merchant, S. Batzer, S. S. Schoenholz, M. Aykol, G. Cheon, and E. D. Cubuk, Scaling deep learning for materials discovery, Nature 624, 80 (2023).DOI
  9. [9]C. Zeni, R. Pinsler, D. Zügner, A. Fowler, M. Horton, X. Fu, Z. Wang, A. Shysheya, J. Crabbé, S. Ueda, R. Sordillo, L. Sun, J. Smith, B. Nguyen, H. Schulz, S. Lewis, C.-W. Huang, Z. Lu, Y. Zhou, H. Yang, H. Hao, J. Li, C. Yang, W. Li, R. Tomioka, and T. Xie, A generative model for inorganic materials design, Nature 639, 624 (2025).DOI
  10. [10]H. Metni, L. Ruple, L. N. Walters, L. Torresi, J. Teufel, H. Schomann, J. Östreicher, Y. Zhang, M. Neubert, Y. Koide, K. Steiner, P. Link, L. Bär, M. Petrova, G. Ceder, and P. Friedrich, Generative models for crystalline materials, Advanced Materials 38, e23620 (2026).DOI
  11. [11]J. E. Saal, S. Kirklin, M. Aykol, B. Meredig, and C. Wolverton, Materials design and discovery with high-throughput density functional theory: The Open Quantum Materials Database (OQMD), JOM 65, 1501 (2013).DOI
  12. [12]A. Jain, S. P. Ong, G. Hautier, W. Chen, W. D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, G. Ceder, and K. A. Persson, Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1, 011002 (2013).DOI
  13. [13]J. Schmidt, T. F. Cerqueira, A. H. Romero, A. Loew, F. Jäger, H.-C. Wang, S. Botti, and M. A. Marques, Improving machine-learning models in materials science through large datasets, Materials Today Physics 48, 101560 (2024).
  14. [14]K. Choudhary and K. Garrity, Designing high-TC superconductors with BCS-inspired screening, density func- tional theory, and deep-learning, npj Computational Materials 8, 244 (2022).
  15. [15]D. Wines, K. Choudhary, A. J. Biacchi, K. F. Garrity, and F. Tavazza, High-throughput DFT-based discovery of next generation two-dimensional (2D) superconductors, Nano Letters 23, 969 (2023).DOI
  16. [16]T. F. T. Cerqueira, A. Sanna, and M. A. L. Marques, Sampling the materials space for conventional superconducting compounds, Advanced Materials 36, 2307085 (2024).DOI
  17. [17]J. B. Gibson, A. C. Hire, P. Prakash, P. M. Dee, B. Geisler, J. S. Kim, Z. Li, J. J. Hamlin, G. R. Stewart, P. J. Hirschfeld, and R. G. Hennig, Developing a complete AI-accelerated workflow for semiconductor discovery, npj Computational Materials 12, 95 (2026).arxiv.org/abs/2503.20005
  18. [18]J. B. Gibson, A. C. Hire, P. M. Dee, O. Barrera, B. Geisler, P. J. Hirschfeld, and R. G. Hennig, Accelerating superconductor discovery through tempered deep learning of the electron-phonon spectral function, npj Computational Materials 11, 7 (2025).DOI
  19. [19]T. Zhang, Y. Jiang, Z. Song, H. Huang, Y. He, Z. Fang, H. Weng, and C. Fang, Catalogue of topological electronic materials, Nature 566, 475 (2019).DOI
  20. [20]N. C. Frey, M. K. Horton, J. M. Munro, S. M. Griffin, K. A. Persson, and V. B. Shenoy, High-throughput search for magnetic and topological order in transition metal oxides, Science Advances 6, eabd1076 (2020).DOI
  21. [21]Y. Su, J. Hu, X. Cai, W. Shi, Y. Xia, Y. Xu, X. Xu, Y. Chen, and G. Li, High-throughput first-principle prediction of collinear magnetic topological materials, npj Computational Materials 8, 261 (2022).DOI
  22. [22]M. G. Vergniory, L. Elcoro, C. Felser, N. Regnault, B. A. Bernevig, and Z. Wang, A complete catalogue of high-quality topological materials, Nature 566, 480 (2019).DOI
  23. [23]Y. Xu, L. Elcoro, Z.-D. Song, B. J. Wieder, M. G. Vergniory, N. Regnault, Y. Chen, C. Felser, and B. A. Bernevig, High-throughput calculations of magnetic topological materials, Nature 586, 702 (2020).DOI
  24. [24]I. Robredo, Y. Xu, Y. Jiang, C. Felser, B. A. Bernevig, L. Elcoro, N. Regnault, and M. G. Vergniory, New magnetic topological materials from high-throughput search, Science Advances 11, eadv8780 (2025).arxiv.org/abs/2408.16851
  25. [25]K. Choudhary, K. F. Garrity, N. J. Ghimire, N. Anand, and F. Tavazza, High-throughput search for magnetic topological materials using spin-orbit spillage, machine learning, and experiments, Physical Review B 103, 155131 (2021).DOI
  26. [26]A. Sufyan, B. Marfoua, J. A. Larsson, E. van Loon, and R. Armiento, High-throughput quantification of altermagnetic band splitting, Physical Review Materials 10, 044407 (2026).arxiv.org/abs/2509.14729
  27. [27]J. Sødequist and T. Olsen, Two-dimensional altermagnets from high throughput computational screening: Symmetry requirements, chiral magnons, and spin-orbit effects, Applied Physics Letters 124, 182409 (2024).
  28. [28]X. Wan, S. Mandal, Y. Guo, and K. Haule, High-throughput search for metallic altermagnets by embedded dynamical mean field theory, Physical Review Letters 135, 106501 (2025).arxiv.org/abs/2412.10356
  29. [29]H. Park, K. O. Mastej, P. Detrattanawichai, R. Nduma, and A. Walsh, Closing the synthesis gap in computational materials design, Nature Synthesis 5, 651 (2026).DOI
  30. [30]A. K. Cheetham and R. Seshadri, Artificial intelligence driving materials discovery? Perspective on the article: Scaling deep learning for materials discovery, Chemistry of Materials 36, 3490 (2024).DOI
  31. [31]J. Leeman, Y. Liu, J. Stiles, S. B. Lee, P. Bhatt, L. M. Schoop, and R. G. Palgrave, Challenges in high-throughput inorganic materials prediction and autonomous synthesis, PRX Energy 3, 011002 (2024).DOI
  32. [32]R. Gautier, X. Zhang, L. Hu, L. Yu, Y. Lin, T. O. L. Sunde, D. Chon, K. R. Poeppelmeier, and A. Zunger, Prediction and accelerated laboratory discovery of previously unknown 18-electron ABX compounds, Nature Chemistry 7, 308 (2015).DOI
  33. [33]A. Narayan, A. Bhutani, S. Rubeck, J. N. Eckstein, D. P. Shoemaker, and L. K. Wagner, Computational and experimental investigation for new transition metal selenides and sulfides: The importance of experimental verification for stability, Physical Review B 94, 045105 (2016).DOI
  34. [34]J. H. Montoya, C. Grimley, M. Aykol, C. Ophus, H. Sternlicht, B. H. Savitzky, A. M. Minor, S. B. Torrisi, J. Goedjen, C.-C. Chung, A. H. Comstock, and S. Sun, How the AI-assisted discovery and synthesis of a ternary oxide highlights capability gaps in materials science, Chemical Science 15, 5660 (2024).DOI
  35. [35]L. N. Walters, Y. Fei, B. Rendy, X. Yang, M. Diallo, K. Jun, G. Wei, M. J. McDermott, A. Giunto, T. Mishra, F. Shen, D. Milsted, M. Sabai Oo, H. Kim, M. C. Tucker, and G. Ceder, Synthetic accessibility and sodium ion conductivity in the Na₈−ₓAₓP₂O₉ (NAP) high-temperature sodium superionic conductor framework, Chemistry of Materials 37, 6807 (2025).arxiv.org/abs/2501.03165
  36. [36]N. J. Szymanski, B. Rendy, Y. Fei, R. E. Kumar, T. He, D. Milsted, M. J. McDermott, M. Gallant, E. D. Cubuk, A. Merchant, H. Kim, A. Jain, C. J. Bartel, K. Persson, Y. Zeng, and G. Ceder, An autonomous laboratory for the accelerated synthesis of inorganic materials, Nature 624, 86 (2023).DOI
  37. [37]T. Yamamoto, Y. Otsubo, T. Nagase, T. Kosuge, and M. Azuma, Synthesis and structure of vacancy-ordered perovskite Ba₆Ta₂Na₂X₂O₁₇ (X = P, V): Significance of structural model selection on discovered compounds, Inorganic Chemistry 63, 4482 (2024).DOI
  38. [38]D. Widdowson and V. Kurlin, Geographic-style maps with a local novelty distance help navigate in the materials space, Scientific Reports 15, 27588 (2025).DOI
  39. [39]N. J. Szymanski, B. Rendy, Y. Fei, R. E. Kumar, T. He, D. Milsted, M. J. McDermott, M. Gallant, E. D. Cubuk, A. Merchant, H. Kim, A. Jain, C. J. Bartel, K. Persson, Y. Zeng, and G. Ceder, Author correction: An autonomous laboratory for the accelerated synthesis of inorganic materials, Nature 650, E1 (2026).DOI
  40. [40]T. Prein, W. O’Leary, A. F. Savvidou, E. Bourneix, and J. E. M. Laulainen, A synthesizability-guided pipeline for materials discovery, arXiv:2511.01790.arxiv.org/abs/2511.01790
  41. [41]M. Juels­holt, Continued challenges in high-throughput materials predictions: MatterGen predicts compounds from the training dataset, Materials Horizons 13, 5672 (2026).DOI
  42. [42]D. Zagorac, H. Müller, S. Ruehl, J. Zagorac, and S. Rehme, Recent developments in the Inorganic Crystal Structure Database: theoretical crystal structure data and related features, Journal of Applied Crystallography 52, 918 (2019).DOI
  43. [43]O. I. Bodak, L. A. Muratova, I. R. Mokra, V. I. Yarovets, A. S. Sobolev, and E. I. Gladyshevskii, Yttrium–nickel, cobalt, molybdenum, or cerium–silicon and yttrium–germanium–silicon ternary systems, in Struktura Faz, Fazovye Prevrashcheniya i Diagrammy Sostoyaniya Metallicheskikh Sistem, edited by O. S. Ivanov and Z. M. Alekseeva (Nauka, Moscow, 1974) pp. 182–186, in Russian.
  44. [44]K. S. Jakob, A. Walsh, K. Reuter, and J. T. Margraf, Learning crystallographic disorder: Bridging prediction and experiment in materials discovery, Advanced Materials 38, e14226 (2026).DOI
  45. [45]T. Krachan, B. Stel’makhovych, and Y. Kuz’ma, The Y–Cu–Al system, Journal of Alloys and Compounds 349, 134 (2003).
  46. [46]K. Kadir, T. Sakai, I. Uehara, and L. Eriksson, YCu₃Al₂, an example of an AB₅ structure type, Acta Crystallographica Section C: Crystal Structure Communications 57, 999 (2001).pubmed.ncbi.nlm.nih.gov/11588348
  47. [47]C. P. Sebastian, C. Fehse, H. Eckert, R.-D. Hoffmann, and R. Pöttgen, Structure, ¹¹⁹Sn solid state NMR and Mössbauer spectroscopy of RECuSn, Solid State Sciences 8, 1386 (2006).DOI
  48. [48]R. Pöttgen, A. M. Witte, W. Jeitschko, and T. Ebel, Preparation, properties, and crystal structures of α- and β-ScCr₂, Journal of Solid State Chemistry 119, 324 (1995).DOI
  49. [49]P. Rogl, Phase equilibria in ternary and higher order systems with rare earth elements and silicon, in Handbook on the Physics and Chemistry of Rare Earths, Vol. 7 (Elsevier, Amsterdam, 1984) Chap. 51, pp. 1–264.
  50. [50]S. Kirklin, J. E. Saal, B. Meredig, A. Thompson, J. W. Doak, M. Aykol, S. Rühl, and C. Wolverton, The Open Quantum Materials Database (OQMD): assessing the accuracy of DFT formation energies, npj Computational Materials 1, 15010 (2015).DOI
  51. [51]D. Antypov, C. M. Collins, M. S. Dyer, J. B. Claridge, and M. J. Rosseinsky, Classification and statistical analysis of structural disorder in crystalline materials, Journal of Applied Crystallography 58, 659 (2025).DOI
  52. [52]M. Ångqvist, W. A. Muñoz, J. M. Rahm, E. Fransson, C. Durniak, P. Rozyczko, T. H. Rod, and P. Erhart, ICET – a Python library for constructing and sampling alloy cluster expansions, Advanced Theory and Simulations 2, 1900015 (2019).DOI
  53. [53]F. T. Cerasoli and D. Donadio, Effective optimization of atomic decoration in giant and superstructurally ordered crystals with machine learning, The Journal of Chemical Physics 161, 044101 (2024).DOI
  54. [54]C. J. Bartel, A. W. Weimer, S. Lany, C. B. Musgrave, and A. M. Holder, The role of decomposition reactions in assessing first-principles predictions of solid stability, npj Computational Materials 5, 4 (2019).DOI
  55. [55]H. Yang, C. Hu, Y. Zhou, X. Liu, Y. Shi, J. Li, G. Li, Z. Chen, S. Chen, C. Zeni, M. Horton, R. Pinsler, A. Fowler, D. Zügner, T. Xie, J. Smith, L. Sun, Q. Wang, L. Kong, C. Liu, H. Hao, and Z. Lu, MatterSim: A deep learning atomistic model across elements, temperatures and pressures, arXiv:2405.04967 (2024), arXiv:2405.04967 [cond-mat.mtrl-sci].arxiv.org/abs/2405.04967
  56. [56]X.-Q. Han, Z.-F. Gao, W.-K. Li, P. Guo, and Z.-Y. Lu, PhononBench: A large-scale phonon-based benchmark for dynamical stability in crystal generation, AI for Science 2, 035005 (2026).arxiv.org/abs/2512.21227
  57. [57]A. Togo, First-principles phonon calculations with phonopy and phono3py, Journal of the Physical Society of Japan 92, 012001 (2023).DOI
  58. [58]A. Togo, L. Chaput, T. Tadano, and I. Tanaka, Implementation strategies in phonopy and phono3py, Journal of Physics: Condensed Matter 35, 353001 (2023).DOI
  59. [59]H. Lukas, S. G. Fries, and B. Sundman, Computational Thermodynamics: The Calphad Method (Cambridge University Press, Cambridge, 2007).
  60. [60]C. J. Bartel, S. L. Millican, A. M. Deml, J. R. Rumptz, W. Tumas, A. W. Weimer, S. Lany, V. Stevanović, C. B. Musgrave, and A. M. Holder, Physical descriptor for the Gibbs energy of inorganic crystalline solids and temperature-dependent materials chemistry, Nature Communications 9, 4168 (2018).DOI
  61. [61]A. Akrap, D. Bordelon, S. Chatterjee, E. D. Dahlberg, R. P. Devaty, S. M. Frolov, C. Gould, L. H. Greene, S. Guchhait, J. J. Hamlin, B. M. Hunt, M. J. A. Jardine, M. Kayyalah, R. C. Kurchin, V. Kozii, H. F. Legg, I. I. Mazin, V. Mourik, A. B. Özgüler, J. Peñuela-Parra, B. Seradjch, B. Skinner, K. F. Quader, and J. P. Zwolak, Report on reproducibility in condensed matter physics, Physical Review B 113, 119601 (2026).DOI
  62. [62]J. J. Hamlin, jhamlin-uf/synthesizability: code and data, Zenodo (2026).
  63. [63]E. Blokhin and P. Villars, The PAULING FILE project and materials platform for data science: From big data toward materials genome, in Handbook of Materials Modeling, edited by W. Andreoni and S. Yip (Springer, Cham, 2020) pp. 1837–1861.
  64. [64]K. Gao, T. F. T. Cerqueira, A. Sanna, Y.-W. Fang, D. Dangić, I. Errea, H.-C. Wang, S. Botti, and M. A. L. Marques, The maximum T_c of conventional superconductors at ambient pressure, Nature Communications 16, 8253 (2025).DOI
  65. [65]S. P. Ong, W. D. Richards, A. Jain, G. Hautier, M. Kocher, S. Cholia, D. Gunter, V. L. Chevrier, K. A. Persson, and G. Ceder, Python Materials Genomics (pymatgen): A robust, open-source Python library for materials analysis, Computational Materials Science 68, 314 (2013).DOI
  66. [66]S. N. Kabekkodu, A. Dosen, and T. N. Blanton, PDF-5+: a comprehensive Powder Diffraction File for materials characterization, Powder Diffraction 39, 47 (2024).DOI
  67. [67]S. Gražulis, A. Daškevič, A. Merkys, D. Chateigner, L. Lutterotti, M. Quiros, N. R. Serebryanya, P. Moeck, R. T. Downs, and A. Le Bail, Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration, Nucleic Acids Research 40, D420 (2012).DOI
  68. [68]H. M. Rietveld, A profile refinement method for nuclear and magnetic structures, Journal of Applied Crystallography 2, 65 (1969).
  69. [69]B. H. Toby and R. B. Von Dreele, GSAS-II: the genesis of a modern open-source all purpose crystallography software package, Journal of Applied Crystallography 46, 544 (2013).DOI

Paper details

vlnc:W_stppb9ts
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 13

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Opus 4.6, Opus 5.5, Claude Fable 5.1 (bare), Sonnet 5.5

View statement
Looking for related papers…
Contents