betaFeedback

WorksPhysics and Astronomy

Experimental Evaluation of High-Throughput Structure Predictions

Abstract

High throughput computational databases such as Materials Project, the Open Quantum Materials Database, and Alexandria now each list on the order of 10^5 predicted stable compounds. However, the overall reliability of these predictions in terms of actual experimental synthesizability remains poorly understood. In this work we attempt to synthesize, via arc melting, 34 different predicted ternary compounds. The majority of these materials did not form in the predicted structure, instead resulting in disordered variants or multiphase mixtures. Four formed ordered structures not reported before, one of them at a composition reported earlier without a structure. We discuss both the failures and the successes, and identify simple filtering criteria that can help researchers avoid hypothetical materials that are unlikely to form.

Introduction

The discovery of new, functional materials such as high-TcT_{\mathrm{c}} superconductors, improved thermoelectrics, more efficient battery materials, materials for spintronics, etc, remains a central challenge in materials science [1, 2]. Historically, the synthesis of new materials has been driven by a combination of experimental expertise, trial and error, and serendipity [3]. Despite the long history of successes that has produced nearly all of the functional materials in use today, the empirical method of materials discovery is costly and slow [1, 4].

Computational methods have emerged as a promising alternative, predicting the stability of new materials and thereby guiding experimental discovery [1, 2]. In particular, advances in available computational resources have enabled high-throughput density functional theory (DFT) calculations to systematically determine the formation energies for large numbers of known and hypothetical crystal structures. This has given rise to material databases that now each list on the order of 10510^{5} predicted stable compounds [5, 6, 7]. In recent years, generative AI has facilitated the generation of even more new crystal structures, while machine-learning (ML) models have reduced the computational cost of evaluating predicted structures. Together, these advances have drastically expanded the scale of computational materials discovery [8, 9, 10]. As a result, there now exist open materials databases such as Materials Project (MP), Open Quantum Materials Database (OQMD), and Alexandria containing millions of hypothetical structures [11, 12, 13].

Based on the abundance of candidate materials in these open databases, an enormous and wide-ranging effort has been undertaken to apply high-throughput computational screening methods to search for materials with desired properties. For example, structures taken from

large materials databases have been screened for superconductivity [14, 15, 16, 17, 18], magnetic and topological order [19, 20, 21, 22, 23, 24, 25], and altermagnetic spin splitting [26, 27, 28]. Experimental groups have likewise invested considerable time and effort attempting to synthesize and characterize individual candidates predicted to have promising properties. While this effort has undoubtedly produced interesting materials, many of the compounds studied had already been reported as experimentally realized and are simply being characterized in a new way [29, 30].

A DFT calculation predicts an ordered crystal structure, but in the compound that forms, two or more elements can mix on one crystallographic site, producing compositional disorder. Leeman et al. Leeman et al. [31] argue that such a disordered compound is a different material from the predicted compound, and that a claim of a new material should state how it differs from materials already known. In this paper, we count a prediction as a success only when the predicted ordered structure formed and the compound had not been reported before.

Most of the compounds that Gautier et al. Gautier et al. [32] predicted and then attempted meet this standard. They restricted their search to one chemical family, the 483 ternary ABX compositions with 18 valence electrons per formula unit, 400 of them unreported. For each ternary system they computed the energies of the reported phases together with hypothetical phases constructed by analogy with reported isostructural compounds. Of the 16 predicted-stable compounds they attempted by arc melting and annealing, 15 formed in the predicted ordered structure, at compositions that had not been reported in the experimental literature.

Other studies that tested a list of predictions found far fewer successes. Narayan et al. Narayan et al. [33] took a similar per-system approach to sulfides and selenides with no known ternary compounds, and none of the 15 candidates they attempted formed. In oxides, Montoya et al. Montoya et al. [34] found new compounds in only one of six predicted ternary systems, and not the predicted ones, and Walters et al. [35] obtained only one of the cation substitutions into Na4TiP2O9\mathrm{Na}_{4}\mathrm{TiP}_{2}\mathrm{O}_{9} predicted to lie near the hull. Gautier et al. [32] and these three groups all computed their own hulls, whereas most screening studies take their candidates from the hull energies stored in public databases. One possible explanation for the success of Gautier et al. [32] is that their targets came from a chemical family in which chemical intuition about stable compounds is well developed [30].

Few experiments have tested, across many ternary systems, how often a never-reported compound listed on or near the database hulls forms. To our knowledge, the success rate of the largest experimental test of database predictions has been disputed. Szymanski et al. [36] reported 41 new compounds from 58 targets that lie on or near the MP hull and were cross-checked against a similar database from Google DeepMind. Leeman et al. [31] reexamined the diffraction data and concluded that none were new. In their analysis, about two thirds of the reported compounds were more likely known, disordered versions of the predicted ordered compounds, and most of the rest had been reported before. Other groups reached similar conclusions [37, 38]. In a correction, Szymanski et al. [39] revised the count to 36 of 57. They clarified that the targets were new to their prediction platform, and that partially disordered versions of a target were counted as successes. Their definition of success is therefore less strict than the one we use in this study.

Later studies have run into the same difficulties with compositional disorder and with compounds that had already been reported. Prein et al. [40] report the synthesis of 7 of 16 database targets, but they claim that six of the seven had been reported before. A disordered form of TaCr2O6\mathrm{TaCr}_{2}\mathrm{O}_{6} proposed by a generative model [9] had already been synthesized in 1971 [41]. With powder X-ray diffraction (XRD), compositional disorder can be judged only by fitting both ordered and disordered models to the data, and a compound missing from the Inorganic Crystal Structure Database (ICSD) [42] may still have been reported in the literature.

In this work, we address the question of the reliability of current high-throughput structure predictions by attempting the synthesis of 34 candidate materials taken from MP, OQMD, and Alexandria databases. The chosen materials were reported to lie on or very close to the convex hull, and all are suitable for arc melting. We chose arc melting because it is inexpensive, fast relative to other synthesis methods such as solid state synthesis which involves repeated re-grinding and firing, and avoids the experimental complexity and trial and error that accompany growth methods like flux growth or chemical vapor transport.

Three of the compounds we attempted, GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}, TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} and ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si}, formed an ordered on-hull structure and had not been reported before. A fourth, YCoSi3\mathrm{YCoSi}_{3}, crystallized in a structure not reported before, although the composition was reported in 1974 [43]. From the XRD data we also identify several recurring ways in which the predicted structures fail to form. Our work highlights important limitations in current high-throughput materials discovery and serves as a guide to researchers on how to identify materials with a greater chance of being experimentally realizable.

Results

We arc melted 34 ternary compositions that OQMD, MP or Alexandria lists as stable or close to stable, and characterized each sample by powder XRD and Rietveld refinement (Figure 1 and Supplementary Section S7). The targets come from three candidate lists (Methods). List A contains entries on or near the MP and OQMD hulls in ternary systems with no reported ternary compound, and List B contains entries on the OQMD hull in systems with exactly one ternary compound. List C contains entries on the Alexandria PBEsol hull that the disorder model described below predicts to be ordered.

Representative XRD patterns with Rietveld fits

Figure 1. Representative XRD patterns with Rietveld fits. Crosses show the measured pattern minus the fitted background, the red line the fit, the blue line the difference, and the tick rows the Bragg positions of each phase (green for the target phase), with the refined weight fractions. Each drawing shows one unit cell of the phase that formed. Annealed samples were held at 1000 °C for one week and measured on a zero-background slide. (a) GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}, annealed. A new compound in the PnmaPnma structure that is the lowest-energy structure at this composition in Alexandria, not the CmcmCmcm structure predicted by OQMD. (b) TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si}, annealed. A new compound in the predicted P4/mmmP4/mmm structure, 91 wt% of the sample. (c) ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si}, annealed. A new compound in the predicted P4/mmmP4/mmm structure, 97 wt% of the sample. (d) YCoSi3†\mathrm{YCoSi}_{3}^{\dagger}, annealed. A nearly single-phase CmmmCmmm polymorph, 8 meV/atom above the predicted on-hull I4mmI4mm structure. (e) YAl3Cu2‡\mathrm{YAl}_{3}\mathrm{Cu}_{2}^{\ddagger}, annealed. Al and Cu mostly occupy their predicted sites. Lines of an unidentified phase are marked (▽), so no weight fractions are given, and the difference curve is scaled by 0.2. (f) Hf2MoIr\mathrm{Hf}_{2}\mathrm{MoIr}, annealed. A disordered parent of the predicted structure, bcc with partial Hf order (88 wt%), with Ti2_2Ni-type Hf2Ir\mathrm{Hf}_{2}\mathrm{Ir} (12 wt%). The pattern simulated from the OQMD prediction (L21L2_{1}, Fm3ˉmFm\bar{3}m, purple) has a Mo/Ir superlattice line at 23.6° that is absent from the data (inset). Triangles mark unindexed lines. The gray band marks the range shown in the inset. †Composition reported without a structure. ‡Ordered counterpart of a known compound in which Al and Cu share a site.

Following Gautier et al. [32], we describe the predicted stability of each target by ΔHf−C(x)\Delta H_{\mathrm{f}}-C(x), the energy of its lowest structure relative to the hull of all other compositions in its ternary system (Table I and Methods). This is the quantity OQMD lists as the “stability” of an entry. A negative value means that the structure is predicted to be stable by that margin. In assigning outcomes, we count a target as having formed an on-hull structure if the structure that formed is the lowest-energy structure in at least one database that places it below the hull. Since the databases do not always agree, a composition can have more than one such structure. We also give PdisorderP_{\mathrm{disorder}}, the probability that two or more elements share a crystallographic site, which the model of Jakob et al. [44] predicts from the chemical composition alone (Methods).

Table 1 sorts the targets into six outcomes, judged from the best-characterized pattern of each (Methods). Targets that formed at their own composition adopted either an on-hull structure or an above-hull polymorph. The others formed a disordered parent of the on-hull structure or some other solid solution, separated into other phases (multiphase), or formed phases we could not identify (unresolved).

TABLE I. Arc-melted targets grouped by XRD outcome category, ordered within a category by decreasing PdisorderP_{\mathrm{disorder}}. The outcome is from the best-characterized scan (after annealing where stated). List: candidate list the target came from (A, B or C; the lists are described in Methods). ΔHf−C(x)\Delta H_{\mathrm{f}}-C(x): energy of the lowest entry at the target composition relative to the convex hull C(x)C(x) of all other compositions [32] in OQMD, the Materials Project (MP) and Alexandria (PBE), in meV/atom; negative means predicted stable, blank means no entry. PdisorderP_{\mathrm{disorder}}: predicted probability of a chemically disordered structure [44]. A structure is on the hull if it is the lowest-energy structure in at least one database that places it below the hull. *: structure previously reported at the target composition; †: composition reported without a structure; ‡: predicted ordered member of a previously reported series whose known member has the same sites partly disordered.

#FormulaListOQMDMPAlex.PdisorderP_{\mathrm{disorder}}XRD outcome
ΔHf−C(x)\Delta H_{\mathrm{f}}-C(x) (meV/atom)
On-hull structure
1ZrPt5_5SiB-41.8-41.8-21.50.20On-hull ZrPt5_5Si, 97 wt% after anneal (ZrPt3_3 3 wt%); new compound
2YAl3_3Cu2_2‡C-10.8-3.00.18Predicted Al/Cu order on the CaCu5_5 lattice (order parameter 0.7 after anneal); La3_3Al11_{11}-type Y3_3(Al,Cu)11_{11} and unidentified lines
3GdPt2_2GeB-32.5-25.40.18YPd2_2Si-type PnmaPnma (lowest in Alexandria), 94 wt% after anneal, small oxide fraction; OQMD CmcmCmcm structure absent; new compound
4TiPt5_5SiB-16.5-25.60.18On-hull TiPt5_5Si, 91 wt% after anneal; new compound
5YSnCu*C-69.1-69.0-69.60.15On-hull LiGaGe-type YSnCu formed; previously known compound
6ScCrC2_2*C-10.026.126.80.05On-hull P63/mmcP6_3/mmc ScCrC2_2, nearly single phase (about 95 wt%); previously known
Above-hull polymorph
7YCoSi*C-42.916.9-31.10.13Known PnmaPnma YCoSi polymorph (+32 meV) formed, textured; not the on-hull P4/nmmP4/nmm structure
8YCoSi3_3†C-17.3-14.90.01CmmmCmmm polymorph (+8 meV), nearly single phase after anneal; on-hull I4mmI4mm structure absent
Disordered parent of on-hull structure
9Al8_8FeCo7_7B-3.412.10.92B2 Al(Fe,Co), Al ordered (η\eta 0.9); Fe/Co order undetermined
10Hf2_2MoIrA-12.0-9.13.70.90bcc Hf-Mo-Ir after anneal, partial Hf order; Mo/Ir order absent; Ti2_2Ni-type Hf2_2Ir 12 wt%
11Al4_4FeCo3_3B-6.5-3.20.89B2 Al(Fe,Co), Al ordered (η\eta 0.9); Fe/Co order undetermined
12Sc2_2PdCuA4.8-1.3-0.70.89B2 Sc(Cu,Pd), Sc ordered; Heusler Cu/Pd order absent; cut-face scan
13Sc3_3Pd2_2CuA-3.04.90.88B2 Sc(Cu,Pd) after anneal, Sc ordered; Cu/Pd layer order of the on-hull structure absent
14ScPd5_5Au2_2A2.89.90.81fcc (Sc,Pd,Au) solution; PbˉamP\bar{b}am order absent in range; bulk scan
15Al2_2MnAu2_2B-0.63.20.62C11b_b Au2_2(Al,Mn), partial Au order; Mn/Al order undetermined
16Sc2_2Pd5_5AuA-9.6-12.9-34.70.60L12_2 Sc(Pd,Au)3_3; PbamPbam Pd/Au order absent
17PtNiGe2_2B-5.817.90.51MnP-type (Ni,Pt)Ge, parent of the on-hull structure, Ni/Pt order absent; pattern unresolved
18Gd3_3Sn6_6Co*B-25.10.24Known CeNiSi2_2-type GdCox_xSn2_2; Co ordering of the on-hull structure absent
Other solid solution
19ScPd2_2AuA6.42078.0-4.70.56Hexagonal Sc(Pd,Au)3_3 majority; fcc-stacked Sc(Pd,Au)3_3 minority is the L12_2 parent of the on-hull structure
Multiphase, on-hull structure not formed
20ScPd2_2CuA17.733.24.80.75fcc-derived Sc(Cu,Pd)3_3-type plus hexagonal phase; compositions undetermined
21La5_5Al3_3Co2_2B-0.70.75Known La3_3Co3_3Al3_3 majority; on-hull structure not identified, minority up to ∼\sim10 wt% not excluded
22TiPt5_5GeB-18.8-34.00.20Pt + Fe2_2P-type Pt2_2Ge, no Ti-bearing phase identified; on-hull structure absent
23Ti2_2Pt8_8SiB-4.890.40.19TiPt5_5Si-type and Pt-rich fcc phase formed; on-hull structure absent
24LaNiSi3_3C-24.7-5.20.07Multiphase, known compounds; on-hull structure absent
25GdSn6_6Co4_4B-4.1-11.20.04Multiphase, known compounds, GdCo6_6Sn6_6 the largest; on-hull structure absent
26NbNi2_2B2_2C12.123.00.03Multiphase: Ni3_3B, NbB2_2, τ\tau-boride Nb2_2Ni21_{21}B6_6; on-hull structure absent
27GdFeGe2_2B0.2-6.30.01Two known phases and two minor ones; on-hull structure absent
28Gd2_2Fe3_3Ge5_5B-8.60.01Multiphase, four known phases; on-hull structure absent
29GdFeGe3_3B-19.0-30.60.01Multiphase, three known phases; on-hull structure absent
30LaRuCu2_2C0.928.30.00Ru and probably La(OH)3_3; on-hull structure absent
On-hull structure did not form but structure(s) unresolved
31Pd6_6Cu5_5GeA-19.6-15.90.93Not CmmmCmmm; B2-type when measured on a cut face, broad fcc after grinding; unresolved
32La2_2PdAu2_2A-0.811.90.88Not the on-hull structure; multiphase, no phase identified
33Ti2_2Pt8_8GeB-3.9-45.4103.00.26Pt-rich fcc-type phase plus unidentified lines; on-hull structure absent
34ScPdCu4_4A-24.23.90.25Broad pattern, no well-defined lines; on-hull structure absent

Table 1.

New compounds and structures

GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}, TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} and ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si} formed on-hull structures, and we found no earlier report of any of these compounds in the literature. Each of these compounds is more than 90 wt% of its sample after one week at 1000 °C (Methods).

GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge} formed the YPd2Si\mathrm{YPd}_{2}\mathrm{Si}-type PnmaPnma structure, which is the lowest-energy structure at this composition in Alexandria. The PnmaPnma structure is not the lowest-energy one in OQMD, the database from which we selected the target, where a CmcmCmcm structure is lowest. After annealing, GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge} is 94 wt% of the sample, and the

remaining 6 wt% is likely Gd2O3\mathrm{Gd_2O_3} (Figure 1a).

TiPt5Si\mathrm{TiPt_5Si} and ZrPt5Si\mathrm{ZrPt_5Si} formed the predicted P4/mmmP4/mmm structure, which is the lowest-energy structure in every database that lists these compositions. After annealing, TiPt5Si\mathrm{TiPt_5Si} is 91 wt% of its sample, with the rest an fcc phase, and ZrPt5Si\mathrm{ZrPt_5Si} is 97 wt%, with 3 wt% ZrPt3\mathrm{ZrPt_3} (Figure 1b,Figure 1c). All three compounds were already identifiable in the as-cast buttons. As cast, GdPt2Ge\mathrm{GdPt_2Ge} was already the main phase, and annealing raised the fractions of TiPt5Si\mathrm{TiPt_5Si} and ZrPt5Si\mathrm{ZrPt_5Si}. Supplementary Figure S1 compares the as-cast and annealed fits.

Figure S1. Fits of the three new compounds after annealing and as cast. Here the fit after annealing is red and the as-cast fit blue (no difference curves are drawn). Left, full patterns, with the measured pattern minus the background (crosses) and the Bragg positions of the phase at the nominal composition (green ticks), labeled with its weight fraction and RwpR_{wp}. Right, lines of that phase enlarged. RwpR_{wp} cannot be compared between the as-cast and annealed scans (Sec. S4). Annealing raised the fractions of TiPt₅Si and ZrPt₅Si, while GdPt₂Ge was already the main phase as cast.

The composition YCoSi3\mathrm{YCoSi_3} was listed in a 1974 study of the Y–Co–Si system, which gave the structures of the other ternary compounds of that system but not of YCoSi3\mathrm{YCoSi_3} [43]. Our sample formed a CmmmCmmm structure of the SmNiGe3_3 type, 8 meV/atom above the predicted I4mmI4mm structure in OQMD, and is therefore an above-hull polymorph. After annealing, the pattern is fitted by the CmmmCmmm phase alone (Figure 1d). To our knowledge, this is the first structure reported for YCoSi3\mathrm{YCoSi_3}.

YAl3Cu2\mathrm{YAl_3Cu_2} formed the predicted CaCu5_5-type structure, in which Al fills the 3g site and Cu the 2c site (Figure 1e). Al and Cu mostly occupy their predicted sites, and a model with Al and Cu distributed at random fits clearly worse (Supplementary Section S7). The same structure type is known in the Y–Al–Cu system at a different composition, YAl2Cu3\mathrm{YAl_2Cu_3} [45]. In a single crystal of YAl2Cu3\mathrm{YAl_2Cu_3}, Kadir et al. [46] found Cu alone on the 2c site and Al and Cu sharing the 3g site, the same site preference as in the prediction. Lines of an unidentified phase remain in the pattern, so we do not quote weight fractions. YAl3Cu2\mathrm{YAl_3Cu_2} is a nearly ordered compound in the predicted structure at a composition not reported before, but its structure type was already known in this system at a different composition.

Previously reported compounds

YSnCu\mathrm{YSnCu}, ScCrC2\mathrm{ScCrC_2} and YCoSi\mathrm{YCoSi} formed compounds that had been reported before [47, 48, 49] (asterisks in Table I). In selecting targets, we screened out reported compounds mainly through the databases themselves (Methods). YSnCu\mathrm{YSnCu}, for example, is in the ICSD, but MP labels its entry “theoretical” [12], so the database flags for experimentally observed compounds are not complete. We found the papers reporting these three compounds, and the 1974 paper listing the composition YCoSi3\mathrm{YCoSi_3} [43], only in a later and more thorough search of the literature. YSnCu\mathrm{YSnCu} and ScCrC2\mathrm{ScCrC_2} formed the on-hull structure, YSnCu\mathrm{YSnCu} as 90 wt% of its sample and ScCrC2\mathrm{ScCrC_2} nearly single phase (about 95 wt%). YCoSi\mathrm{YCoSi} formed its known PnmaPnma structure, 32 meV/atom above the predicted P4/nmmP4/nmm structure, as 75 wt% of its sample, and is therefore an above-hull polymorph.

Disordered parents of the on-hull structure

Ten targets formed a solid solution derived from the on-hull structure in which two or more elements mix on a site (Table I). We assign this category when the pattern matches a disordered parent and the order that distinguishes the on-hull structure is absent or cannot be determined. We judge this from refinements of ordered and disordered models of each target and from the superlattice lines that only the ordered structure produces. Figure 1f shows annealed Hf2MoIr\mathrm{Hf_2MoIr}, whose main phase is a bcc cell in which Hf partly orders onto the cube corners while Mo and Ir share the other site. In the pattern simulated from the predicted L21L2_1 structure, the order of Mo and Ir produces a (111) line near 23.6°, and this line is absent from the data (Figure 1f, inset). The remaining 12 wt% of the sample is likely a Ti2Ni\mathrm{Ti_2Ni}-type Hf2Ir\mathrm{Hf_2Ir} phase.

For three targets, our fits cannot distinguish the disordered parent from the on-hull structure. The patterns of Al8FeCo7\mathrm{Al_8FeCo_7} and Al4FeCo3\mathrm{Al_4FeCo_3} are fitted by a B2 cell with Al on one site and Fe and Co sharing the other, and the predicted structures differ from this disordered model only in how Fe and Co are arranged. Because Fe and Co differ by one in atomic number, the superlattice lines of Fe/Co order would have at most 0.04% of the intensity of the strongest line with Cu Kα\alpha radiation, and the ordered and disordered models fit equally well (Supplementary Section S7). In Al2MnAu6\mathrm{Al_2MnAu_6}, the predicted C2/mC2/m structure and its C11bC11_b parent, in which Al and Mn share a site, also fit the pattern equally well. We list all three as disordered parents, but each could equally be the on-hull structure, and the split symbols in Figure 2 mark both possibilities.

Figure 2. PdisorderP_{\mathrm{disorder}} versus ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x) in OQMD [11, 50] for the 34 targets of Table I. Green circles: the predicted structure formed (filled: on-hull structure, the lowest-energy structure in at least one database that places it below the hull; open: above-hull polymorph). Blue squares: a solid solution formed (filled: disordered parent of the on-hull structure; open: other solid solution). Dark gray triangles: the on-hull structure did not form (filled: multiphase; open: unresolved). A split symbol marks a sample whose data allow two categories that the data cannot distinguish. *, † and ‡ as in Table I. Red X: every structure below the hull in any of the three databases is dynamically unstable (Methods). Dashed line: ΔHf−C(x)=0\Delta H_{\mathrm{f}} - C(x) = 0.

Other outcomes

ScPd2Au\mathrm{ScPd_2Au} formed a solid solution whose structure is not derived from the on-hull structure (Supplementary Section S7).

Eleven targets separated into several phases, none of which is the on-hull structure. In most of them, the phases we could identify are previously reported compounds. For example, GdFeGe3\mathrm{GdFeGe_3} separated into three known phases (Supplementary Section S7). The pattern of ScPd2Cu\mathrm{ScPd_2Cu} can also be fitted by a disordered parent of the on-hull structure, so its split symbol in Figure 2 shows both multiphase and disordered parent.

In ScPdCu4\mathrm{ScPdCu_4}, Pd6Cu5Ge\mathrm{Pd_6Cu_5Ge}, La2PdAu2\mathrm{La_2PdAu_2} and Ti2Pt8Ge\mathrm{Ti_2Pt_8Ge} the on-hull structure does not match the pattern, and we could not identify the phases that formed. Supplementary Section S7 gives further details.

Discussion

Figure 2 plots, for every target, the two quantities that can be evaluated before synthesis: the disorder probability PdisorderP_{\mathrm{disorder}} and the margin below the hull, ΔHf−C(x)\Delta H_{\mathrm{f}} - C(x) (with the OQMD values). The symbols mark the outcome categories of Table I. A split symbol marks a target whose data allow two categories, such as the three compositions for which ordered and disordered models fit equally well. Crosses mark targets whose structures below the hull are all dynamically unstable (Methods). The disorder probability PdisorderP_{\mathrm{disorder}}, from the model of Jakob et al. [44], is the predicted probability that a compound of the target composition has two or more elements sharing a site.

The targets that formed an on-hull structure or an above-hull polymorph cluster in the lower left of Figure 2, where PdisorderP_{\mathrm{disorder}} is low and the target lies below the hull, and they lie further below the hull than most of the targets that did not form. None of the 14 targets with Pdisorder>0.5P_{\mathrm{disorder}} > 0.5 formed, and 9 of them gave a disordered parent of the on-hull structure instead. These 14 come

from Lists A and B, which were not pre-screened on PdisorderP_{\mathrm{disorder}}.

Gautier et al. [32] chose their targets by an electron count of 18 per formula unit and a large computed margin below the hull, and most of the compounds they attempted formed in the predicted ordered structure. Their six single-phase products lie at least 130 meV/atom below the hull they computed, about five times the median margin of the eight targets that formed in this study. Their products also mostly have a low disorder probability in the model of Jakob et al. [44], below 0.2 for 10 of the 15. Their selection therefore favored the same two properties that distinguish the targets that formed in this study.

About half of the entries in the ICSD contain some form of site disorder [44, 51], whereas the database hulls are built from ordered cells at 0 K. Configurational entropy favors a disordered phase at high temperature [29], and when an arc-melted button is quenched from high temperature, the disorder can be retained. After a week at 1000 ∘C1000\,^{\circ}\mathrm{C}, the predicted order was still absent in Hf2MoIrHf_2MoIr and Sc3Pd2CuSc_3Pd_2Cu. In these two, the disordered phase may be stable at 1000 ∘C1000\,^{\circ}\mathrm{C}, with any ordering transition below that temperature, where diffusion is slow. Otherwise, the predicted order is either not stable at any temperature or did not form within a week. Since PdisorderP_{\mathrm{disorder}} is predicted from the composition alone, it does not say which elements will share a site. Predicting which elements share which sites in the predicted structure can be computationally intensive [52, 53].

A sample that decomposes into several phases implies that the hull was incomplete, that errors in the computed energies were large enough to place an unstable composition on or below it [54], or that temperature or kinetics, which the 00 K hull leaves out, decided the outcome. For Ti2Pt8GeTi_2Pt_8Ge and Ti2Pt8SiTi_2Pt_8Si, OQMD and Alexandria list different lowest-energy predicted structures against the same competing phases, and their values of ΔHf−C(x)\Delta H_f - C(x) differ by about 100100 meV/atom, so at least one of the two values is wrong. More generally, of the 31 targets listed in more than one database, 14 lie below the hull in one database and above it in another (Table I).

We also calculated the phonon spectra of the low-energy structures at each target composition with the MatterSim 5M model [55, 56, 57, 58] (Methods). In YCoSi3YCoSi_3, the predicted I4mmI4mm structure has imaginary phonon modes, while the CmmmCmmm polymorph that formed, about 8 meV/atom higher in OQMD, has none. In YCoSiYCoSi, however, both the predicted P4/nmmP4/nmm structure and the known PnmaPnma structure that formed are dynamically stable, so for YCoSiYCoSi the phonon calculations do not predict which structure forms. For eight targets, every structure below the hull is dynamically unstable, and none of these eight formed. Four of them separated into other phases, including LaNiSi3LaNiSi_3 and GdFeGe3GdFeGe_3, despite having a low PdisorderP_{\mathrm{disorder}} and lying well below the hull.

Summary and outlook

In our study of 34 predicted compounds, taking entries on or near the hulls of OQMD, MP and Alexandria without further criteria rarely gave the predicted compound. Only 8 of the 34 formed an on-hull structure or an above-hull polymorph, and 3 of these had already been reported experimentally.

Eleven targets have Pdisorder<0.2P_{\mathrm{disorder}} < 0.2, lie below the OQMD hull and are dynamically stable. Eight of these formed, and none of the other 23 did. Applying these criteria requires no new DFT calculations. Combined with practical requirements, such as suitability for arc melting or another synthesis route, criteria of this kind can raise the predictive value of these databases.

Even by a strict standard, counting only ordered compounds whose composition had not been reported at all, this approach found three new materials, GdPt2GeGdPt_2Ge, TiPt5SiTiPt_5Si and ZrPt5SiZrPt_5Si, and it gave the first reported structure of YCoSi3YCoSi_3.

The hulls of the large databases are the first stage of a larger effort in materials discovery. A full prediction would treat each system at finite temperature, as a CALPHAD assessment does [59], with the liquid, the solid solutions and any order–disorder transitions [29, 60]. Such assessments are not yet practical across the whole of chemical composition space. Both the database hulls and CALPHAD assessments rest on the candidate structures computed for each system, and both will improve as more of these are computed. In the meantime, the predictions need experimental tests on many more targets than the 34 in this study. Since most models, including the disorder model we used, are trained on compounds that have already been made, the strongest tests are on compositions that have never been examined [41]. Reporting the failures of such tests along with the successes [61] would let each attempt improve the hulls and show which criteria accurately predict experimental synthesizability.

Methods

The database releases we used and the dates on which we retrieved data are recorded in the project repository [62].

Candidate selection

The 34 targets come from three lists, each based on a rough idea, at the time of selection, of what might raise the chance that a predicted compound forms. We give the criteria to show how the targets were chosen. List A contains ternary entries of MP and OQMD within 100 meV/atom of the hull, in systems that have reported binary compounds on two of the three binary edges but no reported ternary compound in the Materials Platform for Data Science (MPDS) [63], and so might hold undiscovered compounds. List B contains entries that OQMD listed on the hull at the time of selection, in systems with binary compounds on all three edges and exactly one reported ternary compound, which we expected to make the hull more reliable. List C contains ternary compounds on the PBEsol hull of the Alexandria subset computed by Gao et al. [64], with Pdisorder<0.2P_{\mathrm{disorder}} < 0.2 to avoid disordered products. From this list we removed compositions at which OQMD has an entry computed from an ICSD record, compounds containing radioactive or toxic elements (Tc, Pm, Th, Pa, U, Np, Pu, Tl and Ac), and the magnetic rare earths Ce to Yb. Three List C targets, LaRuC2LaRuC_2, NbNi2B2NbNi_2B_2 and ScCrC2ScCrC_2, came from a parallel selection with the same filters that also required a predicted superconducting transition temperature above 2 K in the same data set. All targets had to contain elements we had on hand and be suitable for arc melting.

Hull energies

We used OQMD [11, 50], MP [12] and the PBE release of Alexandria [7, 13]. For each target and database, we built the convex hull of every entry in the ternary system and its binary and elemental subsystems, excluding entries at the target composition, with pymatgen [65]. We then subtracted the hull energy at the target composition from the formation energy of the lowest-energy entry there.

Supplementary Table S2 gives the values for all three databases. Three List C targets that lie on the PBEsol hull used for their selection lie 23 to 28 meV/atom above the Alexandria PBE hull.

#FormulaOQMD ΔHf−C\Delta H_f-CStructureMaterials Project ΔHf−C\Delta H_f-CSameAlexandria (PBE) ΔHf−C\Delta H_f-CSame
\multicolumn{9}{l}{On-hull structure}
1ZrPt5_5Si-41.8P4/mmmP4/mmm-41.8yes-21.5yes
2YAl3_3Cu2_2-10.8P6/mmmP6/mmm-3.0yes
3GdPt2_2Ge-32.5CmcmCmcm-25.4no (PnmaPnma)
4TiPt5_5Si-16.5P4/mmmP4/mmm-25.6yes
5YSnCu-69.1P63mcP6_3mc-69.0yes-69.6yes
6ScCrC2_2-10.0P63/mmcP6_3/mmc26.1yes26.8yes
\multicolumn{9}{l}{Above-hull polymorph}
7YCoSi-42.9P4/nmmP4/nmm16.9no (PnmaPnma)-31.1yes
8YCoSi3_3-17.3I4mmI4mm-14.9yes
\multicolumn{9}{l}{Disordered parent of on-hull structure}
9Al8_8FeCo7_7-3.4Pm3ˉmPm\bar{3}m12.1yes
10Hf2_2MoIr-12.0Fm3ˉmFm\bar{3}m-9.1yes3.7yes
11Al4_4FeCo3_3-6.5Im3ˉmIm\bar{3}m-3.2no (R3ˉmR\bar{3}m)
12Sc2_2PdCu4.8Fm3ˉmFm\bar{3}m-1.3yes-0.7no (P4/mmmP4/mmm)
13Sc3_3Pd2_2Cu-3.0P4/mmmP4/mmm4.9yes
14ScPd5_5Au2_22.8PbamPbam9.9yes
15Al2_2MnAu6_6-0.6C2/mC2/m3.2yes
16Sc2_2Pd5_5Au-9.6PbamPbam-12.9no (Amm2Amm2)-34.7yes
17PtNiGe2_2-5.8P21/mP2_1/m17.9no (P3ˉm1P\bar{3}m1)
18Gd3_3Sn6_6Co-25.1CmcmCmcm
\multicolumn{9}{l}{Other solid solution}
19ScPd2_2Au6.4P4/mmmP4/mmm2078.0no (ImmmImmm)-4.7yes
\multicolumn{9}{l}{Multiphase, on-hull structure not formed}
20ScPd2_2Cu17.7I4/mmmI4/mmm33.2no (Fm3ˉmFm\bar{3}m)4.8no (P4/mmmP4/mmm)
21La5_5Al3_3Co2_2-0.7CmcmCmcm
22TiPt5_5Ge-18.8P4/mmmP4/mmm-34.0yes
23Ti2_2Pt8_8Si-4.8P4/mmmP4/mmm90.4no (ImmmImmm)
24LaNiSi3_3-24.7I4mmI4mm-5.2yes
25GdSn6_6Co4_4-4.1I4ˉ2mI\bar{4}2m-11.2yes
26NbNi2_2B2_212.1I4/mmmI4/mmm23.0yes
27GdFeGe2_20.2P21/mP2_1/m-6.3yes
28Gd2_2Fe3_3Ge5_5-8.6C2/cC2/c
29GdFeGe3_3-19.0I4mmI4mm-30.6yes
30LaRuC2_20.9CmcmCmcm28.3no (Amm2Amm2)
\multicolumn{9}{l}{On-hull structure did not form but structure(s) unresolved}
31Pd6_6Cu5_5Ge-19.6CmmmCmmm-15.9no (ImmmImmm)
32La2_2PdAu2_2-0.8C2/mC2/m11.9yes
33Ti2_2Pt8_8Ge-3.9P4/mmmP4/mmm-45.4yes103.0no (ImmmImmm)
34ScPdCu4_4-24.2F4ˉ3mF\bar{4}3m3.9yes

Table S2. The 34 candidates as seen by the three databases. For each database, ΔHf−C(x)\Delta H_f-C(x) is the energy of its lowest entry at the nominal composition relative to the convex hull of all other compositions in that database (meV/atom; negative means the database predicts the compound to be stable), recomputed from the cached entries by the same construction for all three. “Same” states whether the database’s ground-state structure at that composition is the same structure as the OQMD prediction from which the candidate was selected (pymatgen StructureMatcher); the space group is given where it differs. Blank: no entry at the composition. Grouped and numbered as in Table I. Snapshots: OQMD v1.7 local dump; Materials Project API, 7 April 2026; Alexandria PBE 2025.07.02 release.

Disorder probability

We evaluated PdisorderP_{\mathrm{disorder}} with the trained classifier released by Jakob et al. [44]. The model is a recurrent neural network that takes only the chemical composition as input and returns the probability that a compound of that composition has substitutional disorder. Because it uses no structural information, it gives one value per composition, regardless of the structure a database predicts.

Dynamical stability

We tested the dynamical stability of every OQMD, MP and Alexandria PBE entry at the 34 target compositions that lies within 50 meV/atom of the hull of the other compositions, 134 entries in 84 distinct structures. We followed the protocol of the PhononBench benchmark [56], with the MatterSim universal interatomic potential (MatterSim-v1.0.0-5M) [55] and phonopy [57, 58]. Each structure was relaxed with the FIRE algorithm, with the cell and atomic positions free and the space group fixed, until the residual forces fell below 0.005 eV/Å. Force constants were computed from displacements of 0.01 Å in a 2×2×22 \times2 \times2 supercell of the primitive cell and then symmetrized. A structure was counted as dynamically unstable if any phonon frequency along a high-symmetry path through the Brillouin zone fell below −0.1 THz. A target is marked by a cross in Figure 2 if every structure with ΔHf−C(x)<0\Delta H_{\mathrm{f}} - C(x) < 0 in any of the three databases is dynamically unstable.

Synthesis

Samples were melted under Ar in an Edmund Bühler MAM-1 compact arc melter. Air-sensitive elements (Sc, Y, La, Gd and Mn) were cleaned and weighed first, and kept in the transfer chamber of an Ar-filled glovebox while the other elements were weighed, to limit oxidation. Bulk pieces of the elements were melted together.

Powdered Nb was first pressed into a pellet in a hydraulic press and premelted. Each button was melted three to five times, for 15–30 s each time, and flipped between melts. Mass loss was generally below 2%, and the value for each sample is given in the data repository [62]. Some compositions were made multiple times to correct an error in the weighed stoichiometry or to reduce the mass loss. The repository records each remake and its reason. Where a composition was measured more than once, as cast, after annealing or as a second sample, Table I reports the outcome from the pattern whose phases we could identify most completely.

Annealing

Samples to be annealed were wrapped in Ta foil, sealed in silica tubes under Ar, held at 1000 °C for one week and quenched in water. Table I states where an outcome comes from an annealed sample, and the Supplement lists every annealed sample and shows the patterns before and after annealing for the three new compounds.

X-ray diffraction and phase identification

All patterns were measured with Cu KαK\alpha radiation, most of them on a Siemens D500 diffractometer, from powders. Two were measured on bulk pieces on a PAN-analytical X’Pert MPD, and one on a bulk piece on the D500. Supplementary Section S3 gives the mounts, scan ranges and instrumental line profile. We first identified the phases by hand in MDI JADE against the PDF-5+ 2026 database [66], with the predicted structures added. We then repeated the identification with an automated pipeline of search-match and Rietveld refinement (Supplementary Section S2). The automated search compared each pattern with reported structures from the PDF-5+ database and the Crystallography Open Database [67], and with every entry of OQMD, MP and Alexandria in the ternary system, the predicted structures included. We added a fully disordered version of every ordered structure, and random fcc, bcc and hcp cells, in which two or more elements share a site. Candidate combinations of phases were ranked by how well they matched the pattern, by their energy above the hull and by whether their weight fractions were consistent with the nominal composition. The most plausible combinations were refined by the Rietveld method [68] in GSAS-II [69], where the data allowed, with a long-range order parameter η\eta that is 1 for the predicted order and 0 for a random distribution. A target was placed in the on-hull or polymorph category when the phase at the target composition was the largest phase in the refinement. For each target we compared the refinements of ordered and disordered models and of competing combinations, and the Supplement gives these comparisons for every sample. The search-match code is deposited, but not its library of PDF-5+ cards. Every fit of record starts only from structures in OQMD, MP, Alexandria and the Crystallography Open Database, from cells we built, and from six structures entered from their publications. The GSAS-II project files of the fits of record are deposited with the data [62].

Use of AI tools

We used Claude (Anthropic) throughout the project, in the versions Opus 4.6, Opus 5.5, Fable 5.1 and Sonnet 5.5 as they became available. Claude helped write the analysis code in the project repository [62], ran refinements according to our instructions, searched the literature and checked references. We wrote the main text by hand, and Claude suggested revisions, which we accepted, changed or rejected. Claude drafted the per-sample descriptions in the Supplement from our analysis of the refinements, and we revised them. We directed each task, checked the code and its output against the measured data, made all final choices of structural model, fit and interpretation, and take full responsibility for the content.

Data availability

The data of this study and the analysis code are publicly available: https://doi.org/10.5281/zenodo.19685017.

Code availability

The code for the search-match, the Rietveld fits, the figures and the tables of this work is available at https://doi.org/10.5281/zenodo.19685017.

Funding Declaration

This work was supported by the National Science Foundation under award DMR-2522891.

Author contributions

G.R.S., B.G., R.G.H., P.J.H. and J.J.H. conceived the project. G.D.D., J.G., J.N., J.E., M.C., T.M., J.S.K. and G.R.S. synthesized the samples, and M.C. annealed them. G.D.D., J.S.K. and G.R.S. collected the XRD data, and G.D.D., M.J., Z.L. and J.J.H. analyzed them. P.P. and A.V. contributed the disorder-model and dynamic-stability calculations and advised on the use of the databases. J.J.H. developed the analysis code. G.D.D. and J.J.H. wrote the manuscript, and all authors reviewed it.

Competing interests

The authors declare no competing interests.

Additional information

Correspondence and requests for materials should be addressed to James J. Hamlin.

Supplemental Material

Samples

Table S1 lists the 59 arc-melted buttons made for the 34 candidate compositions, with the mass loss of each. For each candidate, one pattern, the pattern of record, gives the outcome in Table I, and its fit is the fit of record. Table S1 gives the button of each pattern, whether it was as cast or annealed, the instrument and the mount. For four candidates, YAl3Cu2\mathrm{YAl}_{3}\mathrm{Cu}_{2}, ScCrC2\mathrm{ScCrC}_{2}, Sc2Pd5Au\mathrm{Sc}_{2}\mathrm{Pd}_{5}\mathrm{Au} and Pd6Cu5Ge\mathrm{Pd}_{6}\mathrm{Cu}_{5}\mathrm{Ge}, this pattern is of a later button of the same composition. Eight samples were annealed (Methods). For seven of them, the outcome comes from the annealed sample, and for Sc2PdCu\mathrm{Sc}_{2}\mathrm{PdCu}, whose annealed pattern was inconclusive, from the as-cast pattern. Section S7 shows, for each candidate, the fit of its pattern and the reasoning behind its outcome in Table I.

Phase identification

We first analyzed every pattern with MDI JADE, used interactively, by search-match against the PDF-5+ 2026 database of the International Centre for Diffraction Data (ICDD) [66] and by whole-pattern fitting. We also searched the predicted structures of OQMD, MP and Alexandria through the JADE user database, but not in the same search as the PDF cards, and without disordered versions of these structures. This gave a first outcome for each sample and in some cases identified the main phases, but several patterns were left only partly explained.

Following this manual analysis, we built an automated pipeline that matches each pattern against all of these structures together. For each ternary system, the library holds the elemental, binary and ternary entries of OQMD, MP and Alexandria, the structures of the system in the Crystallography Open Database (COD) [67], and the PDF-5+ cards used in the JADE analysis. Because a disordered phase can give the same main lines as an ordered predicted structure, the library also holds a fully disordered version of each ordered structure, in which every site carries the average composition. For many systems it also holds partially disordered versions, in which only some sites mix, with cells relaxed with MatterSim, and solid solutions between two known binaries of the same structure type that share an element, such as (Pt,Ni)Ge or Sc(Pd,Cu), with lattice parameters interpolated by Vegard’s law. It also holds random fcc, bcc and hcp cells at the nominal composition, whose volume per atom is the composition-weighted average of the volumes per atom of the elements. The calculated pattern of each phase includes the instrumental line profile. Because computed lattice parameters differ slightly from measured ones, the search recalculates the pattern of each phase with its lattice parameters scaled by up to 2% and keeps the scaling that best matches the measured pattern. The candidates are single phases, pairs and triples whose compositions combine to give the nominal composition to within 0.15 in barycentric composition coordinates, and pairs of polymorphs at one composition. Each combination is fitted to the pattern by non-negative least squares and scored by its residual, its energy above the hull and small penalties for extra phases, trace phases and an off-nominal composition, with weights set in the deposited code. The 15 best-ranked combinations, chosen to differ in their phases, were refined in GSAS-II [69] and ranked by RwpR_{\mathrm{wp}}, and combinations whose refined parameters became unphysical were discarded. The repository [62] contains the search-match code but not the PDF-5+ cards, which may not be redistributed, and the final Rietveld fits start only from open structures (Sec. S3).

The automated search did not reliably find phases below about 10 wt%. We added such phases by hand, either from the JADE analysis or by testing likely extra phases, such as oxides, against lines the fit left unexplained, and we kept a phase only where lines of its own, not shared with another phase, are present in the data. With that check, the final fits determine smaller fractions, such as the 6 wt% of Gd2O3\mathrm{Gd}_{2}\mathrm{O}_{3} in GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}.

X-ray diffraction and Rietveld refinement

All patterns were measured with Cu Kα\alpha radiation, all but two on the Siemens D500. Powder ground or filed from the button was mounted on a PMMA slide or, for most annealed samples, on a zero-background Si slide. On PMMA slides the powder was fixed with silicone grease or petroleum jelly, and the slide and the grease add a broad hump at low angle, so we started each PMMA-slide refinement above it, mostly near 18∘18^\circ. On zero-background slides a few drops of grease diluted to a few percent in hexane left a thin film, onto which the powder was sprinkled, so these patterns have almost no low-angle hump. The D500 scans run from 5 to 120 or 150° in steps of 0.02°, and the two PANalytical scans from about 20 to 120 and 30 to 130°. Three patterns are of solid pieces of a button rather than powders, two of them measured on a PANalytical X’Pert MPD, and their entries in Sec. S7 describe each.

For the D500, we refined the instrumental line profile and zero offset in GSAS-II [69] from a pattern of a quartz standard and held them fixed in every final fit. Only the as-cast fits of Sec. S4 refine a zero offset, in place of the sample displacement. The PANalytical patterns were fitted with that instrument’s profile from a LaB6_6 standard.

With the zero offset held, we refined the sample displacement, the height of the powder surface relative to the axis of the diffractometer. For seven powders on

PMMA slides, noted in their entries, it refined to more than about 300 μ\mum. A thin layer of powder on a flat slide cannot be that far out of position, so we held it at zero for these seven. Any real displacement then shifts their lines without being modelled, so the lattice parameters of these seven samples are uncertain by up to about 0.5%. For thin layers of powder on zero-background slides, noted in their entries, we refined a thin-layer intensity correction, which agrees with the mass of powder on the slide.

A script ran each refinement by adding one group of parameters at a time. The scale factors with the background, the phase fractions, the main-phase lattice parameters with the sample displacement, the preferred-orientation term and the order parameter were kept whenever their values were physical. Every other group was kept only if it lowered RwpR_{\mathrm{wp}} (defined below) by more than 0.05 percentage points and left every value physical, which means positive microstrain and crystallite size, occupancies between 0 and 1 and a March–Dollase ratio between 0.3 and 3. In order, it refined the scale factors and a Chebyshev background, the phase fractions, and the lattice parameters of the main phase with the sample displacement. It then refined the lattice parameters of each other phase, the microstrain and crystallite size of the main phase, and the microstrain of the larger other phases. Where the pattern required them, it added an anisotropic microstrain [70], a March–Dollase preferred-orientation term [71], and site occupancies or the single order parameter described below. It ended with an isotropic atomic displacement parameter for the main phase.

Each lattice parameter could move at most 2% from its starting value for a structure taken from a database or the literature, and at most 5% for a disordered parent or a solid solution, whose starting cell is only an estimate. The script undid any step that moved a lattice parameter beyond this limit. A predicted structure whose lines cannot be matched within 2% of its computed lattice parameters therefore counts as absent.

RwpR_{\mathrm{wp}} is the usual weighted profile residual [72]. Because RwpR_{\mathrm{wp}} depends on the range, the counting statistics and the background, we compare it only between fits of the same scan over the same range with the same options.

The final fits start only from open structures: entries of OQMD, MP, Alexandria and the COD, cells we built for disordered and solid-solution models, and six structures we entered by hand from the crystallographic tables of their publications, so that the repository holds no copyrighted PDF cards. Two are CeNiSi2\mathrm{CeNiSi}_{2}-type phases, GdFe0.37Ge2\mathrm{GdFe}_{0.37}\mathrm{Ge}_{2} of Jemmali et al. [73] and GdCoxSn2\mathrm{GdCo}_{x}\mathrm{Sn}_{2} of Gil et al. [74]. The others are ScCr2C\mathrm{ScCr}_{2}\mathrm{C} of Pöttgen et al. [48], LaNi6Si6\mathrm{LaNi}_{6}\mathrm{Si}_{6} of Pani et al. [75], La4Co3Al3\mathrm{La}_{4}\mathrm{Co}_{3}\mathrm{Al}_{3} of Tursina et al. [76], and the La3Al11\mathrm{La}_{3}\mathrm{Al}_{11}-type Y3(Al,Cu)11\mathrm{Y}_{3}(\mathrm{Al},\mathrm{Cu})_{11} partner of YAl3Cu2\mathrm{YAl}_{3}\mathrm{Cu}_{2} from the thesis of Krachan [77]. The disordered parents and the models of partial order were built from the predicted structures. In a model of partial order, one parameter moves the occupancy of each site linearly from its value in the ordered structure to the average over the sites that mix, that is, from full order to a random distribution.

A candidate counts as formed when the phase at the nominal composition is the largest phase by weight fraction in its fit. To test for order, we fitted the pattern with the ordered on-hull structure and with its disordered parent, the same structure with only the elements that the order separates mixed on their sites. At each line that the order adds or changes, we compared the net observed intensity, after subtracting the background, with the calculated intensity, using the counting uncertainty of the observed intensity. If the ordered model calculates these lines above that uncertainty and they are observed, the order is present. If they are calculated above the uncertainty but not observed, the ordered structure is absent and the candidate is a disordered parent. If they are calculated below the uncertainty, as for the Fe/Co order of Al8FeCo7\mathrm{Al}_{8}\mathrm{FeCo}_{7} and Al4FeCo3\mathrm{Al}_{4}\mathrm{FeCo}_{3}, the two cannot be told apart, and Figure 2 marks both. Section S7 shows, for each candidate, the fit of its pattern together with one or two fits of alternative models of the same pattern, such as the predicted ordered structure in place of the phase that formed, or a model in which the ordered elements share their sites. The fitted patterns, refinement logs and GSAS-II project files of every fit in Sec. S7 are in the repository [62].

As-cast and annealed samples

Figure S1 compares the fits before and after annealing for the three new compounds. GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge} was already the main phase as cast, and the PnmaPnma phase alone fits the as-cast pattern once a preferred orientation along [100] is included. TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} is 62 wt% as the as-cast button, and its (100) superlattice line near 22.7° is clear of the lines of TiPt8\mathrm{TiPt}_{8} and has the calculated intensity. Annealing raised the TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} fraction to 91 wt%, and that of ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si} from 29 to 97 wt%. The as-cast fits have a lower RwpR_{\mathrm{wp}} than the annealed ones, although their patterns are poorer. The as-cast powders were on PMMA slides and were refined over a shorter range, and the slide background makes up most of their counts. Because RwpR_{\mathrm{wp}} includes the background, it is smaller for such patterns, so it cannot be compared between the two scans of a sample.

Database values

Table S2 gives ΔHf−C(x)\Delta H_{\mathrm{f}}-C(x) for each candidate in the three databases, computed as described in Methods. The values were computed from the entries of each ternary system in OQMD 1.7, the Materials Project (April 2026) and the Alexandria PBE release 2025.07.02. These entries, extracted from the full databases, are included in the repository [62].

Dynamical stability

Table S3 lists, for each candidate, the structures that lie below the hull of the other compositions in at least one database, and whether each is dynamically stable. We relaxed each structure with MatterSim 1.2.5 (5M model) and calculated its phonons with phonopy 4.8.0 by finite displacements in a 2×2×22 \times2 \times2 supercell. A structure counts as unstable if any frequency on the seekpath band path lies below −0.1-0.1 THz. Entries of different databases count as one structure when they have the same space group and pymatgen’s StructureMatcher matches them.

#CompoundDynamically stableDynamically unstable
1ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si}P4/mmmP4/mmm (O,M,A)–
2YAl3Cu2\mathrm{YAl}_{3}\mathrm{Cu}_{2}P6/mmmP6/mmm (O,A)–
3GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}CmcmCmcm (O,A), PnmaPnma (A)–
4TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si}P4/mmmP4/mmm (O,A)–
5YSnCu\mathrm{YSnCu}P63mcP6_{3}mc (O,M,A), F4ˉ3mF\bar{4}3m (A), PnmaPnma (O,A), P4/nmmP4/nmm (A), P6ˉm2P\bar{6}m2 (A), PnmaPnma (A), Imm2Imm2 (A)P63/mmcP6_{3}/mmc (O)
6ScCrC2\mathrm{ScCrC}_{2}P63/mmcP6_{3}/mmc (O,M,A), PmmnPmmn (O,M)–
7YCoSi\mathrm{YCoSi}P4/nmmP4/nmm (O,A), PnmaPnma (O,M,A)–
8YCoSi3\mathrm{YCoSi}_{3}CmmmCmmm (O), P2/mP2/m (A)I4mmI4mm (O,A)
9Al8FeCo7\mathrm{Al}_{8}\mathrm{FeCo}_{7}Pm3ˉmPm\bar{3}m (O,M)–
10Hf2MoIr\mathrm{Hf}_{2}\mathrm{MoIr}Fm3ˉmFm\bar{3}m (O,M,A), P4/mmmP4/mmm (O,A)–
11Al4FeCo3\mathrm{Al}_{4}\mathrm{FeCo}_{3}Im3ˉmIm\bar{3}m (O), R3ˉmR\bar{3}m (A), P4/mmmP4/mmm (A)–
12Sc2PdCu\mathrm{Sc}_{2}\mathrm{PdCu}–Fm3ˉmFm\bar{3}m (O,M,A), P4/mmmP4/mmm (A)
13Sc3Pd2Cu\mathrm{Sc}_{3}\mathrm{Pd}_{2}\mathrm{Cu}–P4/mmmP4/mmm (O,A)
14ScPd5Au2\mathrm{ScPd}_{5}\mathrm{Au}_{2}none below the hull–
15Al2MnAu6\mathrm{Al}_{2}\mathrm{MnAu}_{6}–C2/mC2/m (O,A)
16Sc2Pd5Au\mathrm{Sc}_{2}\mathrm{Pd}_{5}\mathrm{Au}PbamPbam (O,A), I4/mmmI4/mmm (A), Amm2Amm2 (M)–
17PtNiGe2\mathrm{PtNiGe}_{2}P21/mP2_{1}/m (O)–
18Gd3Sn6Co\mathrm{Gd}_{3}\mathrm{Sn}_{6}\mathrm{Co}CmcmCmcm (O)–
19ScPd2Au\mathrm{ScPd}_{2}\mathrm{Au}P4/mmmP4/mmm (O,A)–
20ScPd2Cu\mathrm{ScPd}_{2}\mathrm{Cu}none below the hull–
21La5Al3Co2\mathrm{La}_{5}\mathrm{Al}_{3}\mathrm{Co}_{2}–CmcmCmcm (O)
22TiPt5Ge\mathrm{TiPt}_{5}\mathrm{Ge}P4/mmmP4/mmm (O,A)–
23Ti2Pt8Si\mathrm{Ti}_{2}\mathrm{Pt}_{8}\mathrm{Si}P4/mmmP4/mmm (O)–
24LaNiSi3\mathrm{LaNiSi}_{3}–I4mmI4mm (O,A)
25GdSn6Co4\mathrm{GdSn}_{6}\mathrm{Co}_{4}–I4ˉ2mI\bar{4}2m (O,A)
26NbNi2B2\mathrm{NbNi}_{2}\mathrm{B}_{2}none below the hull–
27GdFeGe2\mathrm{GdFeGe}_{2}P21/mP2_{1}/m (O,A)–
28Gd2Fe3Ge5\mathrm{Gd}_{2}\mathrm{Fe}_{3}\mathrm{Ge}_{5}C2/cC2/c (O), IbamIbam (O)–
29GdFeGe3\mathrm{GdFeGe}_{3}–I4mmI4mm (O,A)
30LaRuC2\mathrm{LaRuC}_{2}none below the hull–
31Pd6Cu5Ge\mathrm{Pd}_{6}\mathrm{Cu}_{5}\mathrm{Ge}–CmmmCmmm (O,A), ImmmImmm (A)
32La2PdAu2\mathrm{La}_{2}\mathrm{PdAu}_{2}C2/mC2/m (O,A)–
33Ti2Pt8Ge\mathrm{Ti}_{2}\mathrm{Pt}_{8}\mathrm{Ge}P4/mmmP4/mmm (O,M)–
34ScPdCu4\mathrm{ScPdCu}_{4}F4ˉ3mF\bar{4}3m (O,A)–

Table S3. Dynamical stability of the structures below the hull at each candidate composition, grouped and numbered as in Table I. Each structure is given by its space group, with the databases that contain it (O, OQMD; M, MP; A, Alexandria PBE), in order of increasing ΔHf−C(x)\Delta H_f - C(x). A structure is listed if it lies below the hull of the other compositions in at least one of these databases. Stable: no phonon frequency below −0.1-0.1 THz on the band path. ×: every structure below the hull is dynamically unstable (crosses in Figure 2).

Per-sample analysis

For each candidate, in the order of Table I, this section gives the fit of record, whose phases define the outcome, and one or two fits of alternative models. Each refines the same scan with the same range and options but changes one model, usually by adding the predicted ordered structure, putting it in place of a phase, or mixing its sites. In panel (a), crosses show the measured pattern minus the fitted background, the red line the fit of record and the dark blue line the difference. The rows of tick marks below the pattern, numbered as in the legend, give the Bragg positions of each phase, green for the phase at the nominal composition. Panel (b) compares the difference curves of the fit of record (red) and of the alternative models (blue dashed, then black dotted), each labeled with its RwpR_{\mathrm{wp}}. Panel (c) enlarges the deciding lines, marked by gray bands in (a), with each model’s calculated pattern in its color, or its stick pattern where its refinement diverged.

Samples in which the on-hull structure formed

ZrPt5Si

After a week at 1000 °C, ZrPt5Si\mathrm{ZrPt_5Si} is 97 wt% of its sample in the predicted P4/mmmP4/mmm structure, with a little of what is likely ZrPt3\mathrm{ZrPt_3} (Figure S2). A model with Zr, Si and Pt mixed on all sites fits far worse (Rwp=23.6%R_{wp}=23.6\% against 8.4%) and calculates the (110) line at 31.8° at one eighth of its observed intensity, so Pt is ordered on its own sites. Allowing Zr and Si to exchange gives an exchange of about 1% and no better fit, so Zr and Si are ordered as well. Every model calculates the (001) line at 12.8° too strong, which Zr/Si exchange does not explain. In the as-cast button, ZrPt5Si\mathrm{ZrPt_5Si} was a minority phase (Sec. S4). The prediction is borne out: ZrPt5Si\mathrm{ZrPt_5Si} formed in the predicted ordered structure.

Figure S2. Annealed ZrPt5Si\mathrm{ZrPt_5Si}. In (b) and (c), red is the fit of record, black dotted is the model with Zr, Si and Pt mixed on all sites, and blue dashed is the ordered model refined with exactly the same adjustable parameters as that mixed model, so that blue and black differ only in their site occupancies. At the (110) line near 31.8° in (c), the site-mixed model falls far below the data, while the ordered models follow it. At the (001) line near 12.8°, all models calculate more intensity than observed.

YAl3Cu2YAl_{3}Cu_{2}

The fit of annealed YAl3Cu2YAl_{3}Cu_{2} is poor (Rwp=11.9%R_{\mathrm{wp}} = 11.9\%), with large residuals at the main lines and several lines left unfitted (Figure S3). It holds two phases, a CaCu5CaCu_{5}-type phase in the predicted structure and probably a La3Al11La_{3}Al_{11}-type Y3(Al,Cu)11Y_{3}(Al,Cu)_{11} phase [77], but lines strongest near 29.129.1, 35.235.2 and 41.2∘41.2^\circ belong to neither, and some main lines are shifted or have shoulders, so the two phases do not describe the whole sample and we quote no weight fractions. The conclusion that the predicted Al/Cu order formed rests on one line that the misfit does not affect. The (001) line of the CaCu5CaCu_{5}-type phase at 21.7∘21.7^\circ is clearly present in the data. A model with Al and Cu at random on the 3g and 2c sites gives this line less than a fifth of its observed intensity. The model with the predicted order, Al on 3g and Cu on 2c, gives the line somewhat more intensity than observed, and a partly ordered model, with Al on 88% of the 3g sites and Cu on 83% of the 2c sites, matches the observed intensity. The predicted structure formed, with Al and Cu mostly on their predicted sites, alongside at least two other phases.

Figure S3. Annealed YAl3Cu2YAl_{3}Cu_{2}. The alternative model in (b) places Al and Cu at random on the 3g and 2c sites of the same CaCu5CaCu_{5}-type cell. In (c), only the partly ordered model reproduces the (001) line at 21.7∘21.7^\circ. The unfitted lines near 29.1∘29.1^\circ, 35.2∘35.2^\circ and 41.2∘41.2^\circ belong to the unidentified phase. Thin-layer intensity correction refined (Sec. S3).

GdPt2Ge

After annealing, 94 wt% of the GdPt2_2Ge sample has the YPd2_2Si-type PnmaPnma structure, and the rest is likely Gd2_2O3_3 (Figure S4). This PnmaPnma structure is the lowest-energy structure at this composition in Alexandria. The CmcmCmcm structure, which OQMD lists as the lowest-energy structure, did not form.

Figure S4. Annealed GdPt2_2Ge. Alternative models in (b): the PnmaPnma phase alone, refined with exactly the same adjustable parameters as the CmcmCmcm model, and the OQMD CmcmCmcm structure alone. The top two windows in (c) hold the lines at 11.8° and 18.0° that no model explains. In the other windows, CmcmCmcm (black dotted) calculates nothing at strong PnmaPnma lines and a line near 26.8° that the data lack, and only the fit with the oxide reproduces the Gd2_2O3_3 (222) line.

The CmcmCmcm structure does not fit the pattern at all. Refined alone, it gives Rwp=41%R_{\mathrm{wp}} = 41\%, against 14% for the PnmaPnma structure refined the same way. It gives no intensity at the strong observed lines at 19.8, 31.6, 32.4, 38.8 and 39.9°, and it calculates a line at 26.8° where the data show almost nothing. Two weak lines, at 11.8° and 18.0°, belong to neither phase. GdPt2_2Ge formed in the structure that Alexandria predicts as its lowest-energy one, not in the CmcmCmcm structure from OQMD that it was selected from.

TiPt5Si

After annealing, 91 wt% of the TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} sample has the predicted P4/mmmP4/mmm structure, and the remaining 9 wt% is an fcc phase (Figure S5). A model with Ti, Si and Pt mixed on all sites gives the (110) line at 32.2∘32.2^{\circ} only a tenth of its observed intensity, so Pt is ordered on its own sites. This test cannot tell whether Ti and Si are also ordered. In the as-cast button, TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} was already the main phase (Sec. S4). The prediction is borne out: TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} formed in the predicted structure, with Pt ordered as predicted.

Figure S5. Annealed TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si}, panels as in Figure S2. The alternative model mixes Ti, Si and Pt on every site of the P4/mmmP4/mmm cell. The alternative model loses the (001) and (110) superstructure lines in (c), and the windows near 40 and 46.5∘46.5^{\circ} show lines of the fcc phase (gray ticks) next to lines of TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si} (green ticks).

YSnCu

Of the YSnCu sample, 90 wt% has the LiGaGe-type structure reported by Sebastian et al. [47], and the rest is likely Y3Cu4Sn4Y_{3}Cu_{4}Sn_{4} (Figure S6). This structure is the lowest-energy structure in all three databases.

Figure S6. As-cast YSnCu. The alternative model in (b) keeps the LiGaGe-type cell and Y site but puts Cu and Sn at random on the two remaining sites. Its (101) line, in the upper window of (c), is too weak by more than a factor of two. The lower window shows the strongest isolated line of Y3Cu4Sn4Y_{3}Cu_{4}Sn_{4}.

In this structure Cu and Sn occupy separate sites. A model with Cu and Sn mixed on both sites fits clearly worse (Rwp=8.7%R_{\mathrm{wp}} = 8.7\% against 4.9%4.9\%) and gives the (101) line at 25.9∘25.9^\circ less than half its observed intensity, so Cu and Sn are ordered. YSnCu formed in the predicted structure, but this compound had been reported before.

ScCrC2

About 95 wt% of the as-cast ScCrC2\mathrm{ScCrC}_{2} sample has the P63/mmcP6_{3}/mmc structure of Pöttgen et al. [48], and the rest is likely graphite (Figure S7). This structure is the lowest-energy structure in all three databases. Sc and Cr differ by only three in atomic number, but their order still shows in the (002) line at 19.4∘19.4^\circ. A model with Sc and Cr mixed on their sites gives this line less than half its observed intensity. The first button did not form the carbide, and the pattern shown is from a remake. A weak line at 35.9∘35.9^\circ is not explained by any phase we tried. ScCrC2\mathrm{ScCrC}_{2} formed in the predicted structure, but this compound had been reported before.

Figure S7. As-cast ScCrC2\mathrm{ScCrC}_{2}. The alternative model in (b) shares Sc and Cr equally between their two sites. The windows in (c) show the (002) line of ScCrC2\mathrm{ScCrC}_{2}, which only the ordered model reproduces, the (002) line of graphite, and the unexplained line at 35.9∘35.9^\circ.

Samples that formed an above-hull polymorph

YCoSi

The predicted P4/nmmP4/nmm structure of YCoSi did not form. Instead, 75 wt% of the as-cast sample has the experimentally known PnmaPnma structure [49], which OQMD places 32 meV/atom above the predicted structure (Figure S8).

Figure S8. As-cast YCoSi. In (b) and (c), red is the fit with the experimentally known PnmaPnma phase and blue dashed the fit with the predicted P4/nmmP4/nmm phase in its place, both with the two minor phases. The fit with the predicted phase misses the strongest line, at 36.2∘36.2^\circ, puts intensity near 32.1∘32.1^\circ where the data have none, and adds its (200) line beside the weak PnmaPnma line near 46.1∘46.1^\circ.

The rest is likely Y3Co2Si3\mathrm{Y_3Co_2Si_3} and YCo2Si2\mathrm{YCo_2Si_2}. The strongest line of the pattern, at $36.2^\circ$, belongs to the PnmaPnma phase, and the P4/nmmP4/nmm structure gives almost no intensity there. With the P4/nmmP4/nmm structure in place of the PnmaPnma phase, the fit is far worse (Rwp=40%R_{\mathrm{wp}} = 40\% against 10%$), the refined fraction of the P4/nmmP4/nmm phase drops to about 2 wt%, and its strong (200) line near 46.1∘46.1^\circ is absent from the data. The PnmaPnma phase needs a large preferred-orientation correction, so its line intensities are less certain than its line positions. YCoSi formed in a known structure that is higher in energy than the predicted one.

YCoSi3

After annealing, the YCoSi3YCoSi_{3} sample is a single phase with the SmNiGe3_{3}-type CmmmCmmm structure (Figure S9). OQMD places this structure 8 meV/atom above the predicted I4mmI4mm structure, which it lists as the lowest-energy one. Bodak et al. [43] reported the composition but no structure. Two strong lines of the I4mmI4mm structure, at 35.9∘35.9^\circ and 36.7∘36.7^\circ, would fall where the data are flat. A fit of the I4mmI4mm structure alone diverged, so the figure shows the positions of its lines instead. YCoSi3YCoSi_{3} formed in a structure that OQMD places slightly above the predicted one, not in the predicted structure.

Figure S9. Annealed YCoSi3YCoSi_{3}. In (b), red is the fit with the CmmmCmmm structure alone and blue the fit with the predicted I4mmI4mm structure alone. The I4mmI4mm structure fails at every strong line, so its difference curve shows the whole measured pattern. Thin-layer intensity correction refined (Sec. S3).

Samples that formed a disordered parent of the on-hull structure

Al8FeCo7

Al8_8FeCo7_7 formed a B2 phase, with Al on one site and Fe and Co mixed on the other. The predicted structure is a 2×2×22 \times2 \times2 B2 supercell with Fe and Co on separate sites. X-rays scatter almost equally from Fe and Co, so the lines produced by Fe/Co order are calculated at about 0.01% of the strongest line, far below the noise. The ordered model and the model with Fe and Co mixed both give Rwp=5.9%R_{\mathrm{wp}} = 5.9\%, so our data cannot tell whether Fe and Co are ordered. Al8_8FeCo7_7 formed the predicted lattice with Al ordered, but our data cannot tell whether Fe and Co are also ordered as predicted, so both readings remain possible.

Figure S10. As-cast Al8_8FeCo7_7. (b) The B2 model with Fe and Co mixed (red) and the predicted Fe/Co-ordered Pmˉ3\bar{m}3m model with the same Al order (blue) leave the same difference curve. The Fe/Co superlattice lines are too weak to show, so the figure has no panel (c).

Hf2_2MoIr

After annealing, 88 wt% of the Hf2_2MoIr sample is a bcc phase with partial Hf order, and 12 wt% is likely Ti2_2Ni-type Hf2_2Ir. The predicted L21_1 structure also orders Mo and Ir, which produces a (111) line at 23.6∘^\circ calculated at 4% of the (110) line. The data show no line there (Figure S11). With the same Hf2_2Ir phase, the L21_1 model gives Rwp=16.9%R_{\mathrm{wp}} = 16.9\%, against 7.3% for the fit of record. The B2 (100) line at 27.3∘^\circ has less than half the intensity calculated for full Hf order, so the Hf order is partial. Hf2_2MoIr formed the lattice of the predicted structure, but without the predicted Mo/Ir order and with only partial Hf order.

Figure S11. Annealed Hf2_2MoIr. (b) The bcc model with partial Hf order (red) and the predicted L21_1 structure (blue), each with Hf2_2Ir. (c) The L21_1 (111) line at 23.6∘^\circ, calculated by the prediction and absent from the data, and the B2 (100) line at 27.3∘^\circ, which full Hf order over-calculates.

Al4_4FeCo3_3

Al4_4FeCo3_3 formed a B2 phase, with Al on one site and Fe and Co mixed on the other. The predicted structure is a body-centered Im3ˉmIm\bar{3}m supercell with Fe and Co on separate sites. As in Al8_8FeCo7_7, the lines produced by Fe/Co order are far too weak to detect with X-rays, and the ordered and Fe/Co-mixed models both give Rwp=5.8%R_{\mathrm{wp}} = 5.8\%. Neutron diffraction could settle the Fe/Co order in both compounds, since the neutron scattering lengths of Fe and Co differ by almost a factor of four. Al4_4FeCo3_3 formed the predicted lattice with Al ordered, but our data cannot tell whether Fe and Co are also ordered as predicted, so both readings remain possible.

Figure S12. As-cast Al4_4FeCo3_3. (b) The B2 model with Fe and Co mixed (red) and the predicted Fe/Co-ordered Im3ˉmIm\bar{3}m model with the same Al order (blue), which leave the same difference curve. As for Al8_8FeCo7_7, the Fe/Co superlattice lines are too weak to show.

Sc2_2PdCu

The predicted structures do not match the pattern of Sc2_2PdCu. The lowest-energy structures, L21_1 in OQMD and MP and P4/mmm in Alexandria, both order Cu and Pd, which adds superlattice lines to the B2 pattern. The L21_1 (111) line at 23.6° is calculated at 8% of the strongest line, and the P4/mmm (101) line at 30.7° at 4%, but the data are flat at both positions (Figure S13). The best match we found is a B2 phase, with Sc on one site and Cu and Pd mixed on the other (Rwp=8.1%R_{\mathrm{wp}} = 8.1\%). The pattern is from a cut face of the as-cast button. The B2 (100) line at 27.2° is weaker than full Sc order calculates, so the Sc order is probably incomplete. So the predicted Cu/Pd order did not form.

Figure S13. As-cast Sc2_2PdCu, bulk cut face. (b) B2 with full Sc order (red), the predicted L21_1 Heusler structure (blue) and the Alexandria P4/mmm structure (black). (c) The L21_1 (111) line at 23.6°, the B2 (100) line at 27.2° and the P4/mmm (101) line at 30.7°. The ordered structures each calculate a line that the data lack.

Sc3Pd2Cu

The predicted structure does not match the pattern of Sc3Pd2Cu\mathrm{Sc}_{3}\mathrm{Pd}_{2}\mathrm{Cu}. It has Cu and Pd in alternate layers, which produces a (001) line at 8.95∘8.95^\circ calculated at 6% of the strongest line. We started this refinement at 8∘8^\circ to include that line, and the line is absent, even after a week at 1000∘1000^\circC (Figure S14). The best match we found is a B2 phase, with Sc partly ordered and Cu and Pd mixed (Rwp=4.3%R_{\mathrm{wp}} = 4.3\%). So the predicted Cu/Pd order did not form, although the B2 phase has the same underlying lattice as the predicted structure.

Figure S14. Annealed Sc3Pd2Cu\mathrm{Sc}_{3}\mathrm{Pd}_{2}\mathrm{Cu}. (b) B2 with partial Sc order (red) and the predicted P4/mmmP4/mmm structure (blue). (c) The P4/mmmP4/mmm (001) line at 8.95∘8.95^\circ and the B2 (100) line at 27.2∘27.2^\circ. The blue curve includes that fit’s own background, which bends below the data around the missing line.

ScPd5_5Au2_2

The fcc lattice matches every strong line of ScPd5_5Au2_2, but the intensities of several lines are poorly fitted (Rwp=15.3%R_{\mathrm{wp}} = 15.3\%), because the pattern is from the uncut face of the as-cast button rather than a powder (Figure S15). The predicted Pbam structure is an ordered version of the same fcc lattice. Within the measured range it differs from the disordered fcc model mainly by weak superlattice lines, the strongest near 32∘32^\circ, calculated at about 5% of the strongest line. The data show at most a weak bump near 31.6∘31.6^\circ, slightly below the calculated position, so the conclusion rests on this one weak feature. The scan starts at 30.5∘30.5^\circ, so the stronger superlattice lines at lower angle were not measured, and the button lost 16% of its mass during melting. We take the predicted order as not observed, but it is not excluded, and the conclusion for this sample is provisional.

Figure S15. As-cast ScPd5_5Au2_2, uncut button face. In (b) and (c), red is the disordered fcc model and blue dashed the predicted Pbam structure. (c) The region of the strongest Pbam superlattice line in the measured range, near 32∘32^\circ, where the data show at most a weak bump near 31.6∘31.6^\circ.

Al2_2MnAu6_6

The best fit to Al2_2MnAu6_6 uses a C11bC11_b cell in which Au is only partly ordered, so that a third of the site shared by Al and Mn also holds Au. The predicted C2/mC2/m structure orders Mn and Al on that site. With the same partial Au order, the C2/mC2/m model fits no worse (Rwp=5.9%R_{\mathrm{wp}} = 5.9\% against 6.2%6.2\%). The lines produced only by Mn/Al order, near 32.3∘32.3^\circ, are calculated at about 10 counts, well below the scatter of the data. The small improvement of the C2/mC2/m model comes from the extra freedom of its lower, monoclinic symmetry in fitting the broad lines, not from these lines. Our data therefore cannot tell whether Mn and Al in Al2_2MnAu6_6 are ordered as predicted, so both readings remain possible.

Figure S16. As-cast Al2_2MnAu6_6. (b) C11bC11_b with Al and Mn mixed (red) and C2/mC2/m with the predicted Mn/Al order (blue), both with the same partial Au order. (c) The C11bC11_b (002) and (101) lines near 19.6∘19.6^\circ and 28.7∘28.7^\circ and the broad line near 55.6∘55.6^\circ. The two models misplace the lines at 28.7∘28.7^\circ and 55.6∘55.6^\circ by the same amount. Sample displacement held at zero (Sec. S3).

Sc2Pd5Au

The predicted structures do not match the pattern of Sc2_2Pd5_5Au. The Pbam structure, the lowest-energy structure in OQMD and Alexandria, orders Pd and Au, which produces weak lines near 15.7° and 17.6°. These lines are calculated at five to ten times the noise, but neither appears in the pattern (Figure S17). The Amm2 structure, the lowest-energy structure in MP, does not match either, since its strong lines at 17.9° and 26.4° fall where the data are flat. The best match we found is an L12_2 Sc(Pd,Au)3_3 phase, with Sc on the cube corners and Pd and Au mixed on the face centers (Rwp=7.2%R_{\mathrm{wp}} = 7.2\%).

Figure S17. As-cast Sc2_2Pd5_5Au. (b) L12_2 with Sc order and Pd and Au mixed (red) and the predicted Pbam structure (blue). (c) The Pbam lines near 15.7° and 17.6° and the L12_2 (100) line at 22.3°. Below 17.5° the fitted background runs above the data in both fits, so the absence of the Pbam lines is judged from the shape of the data, not from the difference curve.

PtNiGe2

The predicted structure does not match the pattern of PtNiGe2\mathrm{PtNiGe}_{2}, but the fit is poor (Rwp=21%R_{\mathrm{wp}} = 21\%), so this conclusion is provisional. The predicted P21/mP2_1/m structure orders Ni and Pt, and its strongest order line, (100) at 15.9∘15.9^\circ, is calculated at more than half the intensity of its strongest line. We started both refinements at 14∘14^\circ to include this line, and the data there show a smooth tail with no peak. A weaker order line at 39.0∘39.0^\circ is also absent. The best match we found is MnP-type (Ni,Pt)Ge with Ni and Pt mixed, which at equal amounts of Ni and Pt has the nominal composition. A strong line at 32.2∘32.2^\circ, about 70% of the strongest observed line, is not explained by any model we tried.

Figure S18. PtNiGe2\mathrm{PtNiGe}_{2}. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

Gd3_3Sn6_6Co

The predicted structure does not match the pattern of Gd3_3Sn6_6Co. The structure OQMD predicts is a Cmcm\mathit{Cmcm} structure with ordered Co, which shares its strong lines with the known CeNiSi2_2-type GdCox_xSn2_2 and fits about as well overall. The line that decides between them is the Cmcm\mathit{Cmcm} (152) line at 36.5∘36.5^\circ, which comes from the Co order. This line is calculated at about forty times the noise, and the data show no line there (Figure S19). The best match we found is GdCox_xSn2_2 alone, in which Co partly fills one site, refined with the structure of Gil et al. [74] (Rwp=13.4%R_{\mathrm{wp}} = 13.4\%, Figure S19). So the predicted Co order did not form.

Figure S19. As-cast Gd3_3Sn6_6Co. (b) CeNiSi2_2-type GdCox_xSn2_2 (red) and the predicted Co-ordered Cmcm\mathit{Cmcm} structure in its place (blue). (c) The (152) line of the prediction at 36.5∘36.5^\circ, absent from the data.

Samples that formed another solid solution

ScPd2_2Au

The lines of ScPd2_2Au are broad, which hides much of the detail, and our best fit describes the pattern only approximately (Rwp=7.9%R_{\mathrm{wp}} = 7.9\%, Figure S20). That fit uses two Sc(Pd,Au)3_3 solid solutions that differ in their stacking, a hexagonal D024_{24}-type phase (about 58 wt%) and a cubic L12_2 phase with Pd and Au mixed on the face centers. Other combinations of disordered phases may describe the pattern as well. The predicted P4/mmm structure clearly does not fit. With its DFT cell it gives Rwp=18.6%R_{\mathrm{wp}} = 18.6\%, because its tetragonal cell splits the L12_2 (200) line into two lines, at 44.4 and 46.5°, where the data show a single line at 45.5°. With the predicted Pd/Au order placed on the cubic cell, the superlattice line at 31.6° is calculated too strong (Rwp=8.5%R_{\mathrm{wp}} = 8.5\%), so full Pd/Au order is unlikely. A hexagonal line overlaps that position, so partial order cannot be excluded. The predicted structure did not form, and the best fits come from disordered solid solutions.

Figure S20. ScPd2_2Au. (c) The superlattice line near 31.6° and the (200) line near 45.5°. Sample displacement held at zero (Sec. S3).

Samples that separated into several phases, none of them the on-hull structure

ScPd2_2Cu

The predicted D022_{022} structure does not match the pattern of ScPd2_2Cu well, and the fit we found is poor, so the description of what formed is provisional (Figure S21). Refined with lattice parameters near its DFT values, the D022_{022} model fits much worse than our best match (Rwp=12.8%R_{\mathrm{wp}} = 12.8\% against 6.1%6.1\%). Allowed to change its cell further, it becomes nearly cubic, so the data rule out the predicted cell shape but not the predicted Cu/Pd order. The best match we found has two phases, an fcc-derived Sc(Cu,Pd)3_3 phase with Cu and Pd mixed (about 61 wt%) and a hexagonal CuPd3_3-type phase. A model with Cu and Pd ordered on the same fcc-derived lattice fits about as well (Rwp=6.8%R_{\mathrm{wp}} = 6.8\%), because the lines are broad. A sharp line at 91.4∘91.4^\circ is not explained by any model we tried. The hexagonal model contains no Sc, so the composition of the fcc-derived phase is not known, and if it has the nominal composition it is a disordered version of the predicted structure.

Figure S21. ScPd2_2Cu. (c) Lines near 42.6 and 46.2° and the (220) line. The lines are broad, and the disordered and ordered fcc-derived models differ little. Sample displacement held at zero (Sec. S3).

La5Al3Co2

The best match we found to the strongest lines of La5_5Al3_3Co2_2 is the known La4_4Co3_3Al3_3, refined with the structure of Tursina et al. [76] (Figure S22). Its presence is robust, because it accounts for the strongest lines. It cannot be the whole sample, because its composition differs from the nominal one, and some lines are not explained by La4_4Co3_3Al3_3, but we have not identified the other phases. The predicted CmcmCmcm structure was not identified.

Figure S22. La5_5Al3_3Co2_2. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

TiPt5Ge

The predicted structure does not match the pattern of TiPt5Ge\mathrm{TiPt}_{5}\mathrm{Ge}. Refined alone, the predicted structure gives Rwp=22.7%R_{\mathrm{wp}} = 22.7\%, and its line at 31.66∘31.66^\circ, clear of the Pt and Pt2Ge\mathrm{Pt}_{2}\mathrm{Ge} lines, is absent from the data (Figure S23). A mixture of fcc Pt and Fe2P\mathrm{Fe}_{2}\mathrm{P}-type Pt2Ge\mathrm{Pt}_{2}\mathrm{Ge} matches the pattern well (Rwp=5.4%R_{\mathrm{wp}} = 5.4\%). Neither phase contains Ti, so a Ti-bearing phase, probably minor or poorly crystallized, is missing from the model.

Figure S23. TiPt5Ge\mathrm{TiPt}_{5}\mathrm{Ge}. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

Ti2_2Pt8_8Si

The predicted structure does not match the pattern of Ti2_2Pt8_8Si. The best match we found has two phases in nearly equal amounts, a Pt-rich fcc-derived Ti–Pt phase, modeled with a TiPt2_2-type cell, and a phase with the predicted P4/mmmP4/mmm structure of TiPt5_5Si. The line near 34.7∘34.7^\circ belongs only to this TiPt5_5Si-type phase (Figure S24). With the predicted Ti2_2Pt8_8Si structure in its place, that line is left unexplained and RwpR_{\mathrm{wp}} rises from 7.9%7.9\% to 14.5%14.5\%. The search thus found a predicted structure, that of TiPt5_5Si (Sec. S7 S7.14), in a sample whose nominal composition is different.

Figure S24. Ti2_2Pt8_8Si. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line. Sample displacement held at zero (Sec. S3).

LaNiSi3

The predicted structure does not match the pattern of LaNiSi3\mathrm{LaNiSi}_{3}. Refined alone, the predicted I4mmI4mm structure gives Rwp=41.3%R_{\mathrm{wp}} = 41.3\% (Figure S25). A mixture of known La–Ni silicides, mainly La3Ni3Si7\mathrm{La}_{3}\mathrm{Ni}_{3}\mathrm{Si}_{7} and LaNiSi2\mathrm{LaNiSi}_{2}, with Si and probably some LaNi6Si6\mathrm{LaNi}_{6}\mathrm{Si}_{6} in the structure of Pani et al. [75], matches the pattern well (Rwp=10.6%R_{\mathrm{wp}} = 10.6\%).

Figure S25. LaNiSi3. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

GdSn6Co4

The predicted structure is not identified in the pattern of GdSn6_6Co4_4. Its strongest line coincides with lines of other phases, and at its next strongest lines, near 31.3, 41.7 and 43.0°, the data show no intensity beyond the fit. The best match we found combines five known phases and fits the pattern well (RwpR_{\mathrm{wp}}} = 7.8%$, Figure S26). The two largest, a GdCo6_6Sn6_6-type phase and Gd3_3Co4_4Sn13_{13} (about 38 and 27 wt%), have several lines of their own and are clearly present. The three smaller ones, GdCox_xSn2_2 (refined with the structure of Gil et al. [74]), CoSn and Sn, are less certain.

Figure S26. GdSn6_6Co4_4. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

NbNi2B2\mathrm{NbNi_2B_2}

The predicted structure does not match the pattern of NbNi2B2\mathrm{NbNi_2B_2}. Refined alone, the predicted I4/mmmI4/mmm structure gives Rwp=38.4%R_{\mathrm{wp}} = 38.4\%, and its strong (101) line at 28.40∘28.40^\circ falls where the data show only background (Figure S27). A mixture of Ni3B\mathrm{Ni_3B}, NbB2\mathrm{NbB_2} and the τ\tau-boride Nb2Ni21B6\mathrm{Nb_2Ni_{21}B_6} matches the pattern well (Rwp=11.3%R_{\mathrm{wp}} = 11.3\%).

Figure S27. NbNi2B2\mathrm{NbNi_2B_2}. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

GdFeGe2

The predicted structure does not match the pattern of GdFeGe2\mathrm{GdFeGe}_{2}. Refined alone, the predicted P21/mP2_{1}/m structure gives Rwp=37.4%R_{\mathrm{wp}} = 37.4\%, and its isolated lines at 29.92 and 42.91∘42.91^\circ are absent (Figure S28). A mixture of known Gd–Fe–Ge phases, mainly GdFe0.37Ge2\mathrm{GdFe}_{0.37}\mathrm{Ge}_{2} and GdFe2Ge2\mathrm{GdFe}_{2}\mathrm{Ge}_{2}, matches the pattern well (Rwp=7.3%R_{\mathrm{wp}} = 7.3\%).

Figure S28. GdFeGe2\mathrm{GdFeGe}_{2}. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

Gd2_2Fe3_3Ge5_5

The predicted structure does not match the pattern of Gd2_2Fe3_3Ge5_5. Refined alone, the predicted C2/c structure gives Rwp=38.5%R_{\mathrm{wp}} = 38.5\% (Figure S29). A mixture of known Gd–Fe–Ge phases, mainly GdFe0.37_{0.37}Ge2_2, GdFe2_2Ge2_2 and Gd0.5_{0.5}Fe3_3Ge3_3, with likely a little Ge, matches the pattern well (Rwp=9.4%R_{\mathrm{wp}} = 9.4\%).

Figure S29. Gd2_2Fe3_3Ge5_5. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

GdFeGe3

The predicted structure does not match the pattern of GdFeGe3_3. Refined alone, the predicted I4mmI4mm structure gives Rwp=39.9%R_{\mathrm{wp}} = 39.9\%, and its isolated (103) and (200) lines, at 34.43∘34.43^\circ and 42.31∘42.31^\circ, are absent (Figure S30). A mixture of GdFe0.37_{0.37}Ge2_2, Gd0.5_{0.5}Fe3_3Ge3_3 and Ge matches the pattern well (Rwp=7.5%R_{\mathrm{wp}} = 7.5\%). A weak line at 27.98∘27.98^\circ is not explained.

Figure S30. GdFeGe3_3. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

LaRuC2

The predicted structure of LaRuC2\mathrm{LaRuC}_{2} does not match the pattern of the button with the smallest mass loss (Figure S31). Refined alone it fits far worse than our best fit (Rwp=40.6%R_{\mathrm{wp}} = 40.6\% against 7.5%). The best fit uses Ru metal and La(OH)3\mathrm{La(OH)}_{3}. La(OH)3\mathrm{La(OH)}_{3} was not expected, and its presence suggests that the sample oxidized. An earlier button, which lost more mass during melting, gave a different pattern that we could not describe, but the predicted structure did not form there either.

Figure S31. LaRuC2\mathrm{LaRuC}_{2}. Measured pattern with the background subtracted (black crosses), the best fit (red) and its residual (gray), with the Bragg positions of its phases below. Above them, offset upward, the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line.

Samples whose phases are unresolved, without the on-hull structure

Pd6Cu5Ge

The predicted CmmmCmmm structure of Pd6Cu5GePd_6Cu_5Ge does not match the pattern (Figure S32). Refined alone it fits much worse than our best fit (Rwp=14.4%R_{\mathrm{wp}} = 14.4\% against 8.7%8.7\%), and its superlattice lines near 29.5∘29.5^\circ, which would stand about six times the noise above the background, are absent. The best fit uses a broad fcc solid solution and a small amount of a bcc phase. Because the lines are so broad, this fit does not establish the composition or order of the fcc phase, so we quote no weight fractions and leave what formed unresolved.

Figure S32. Pd6Cu5GePd_6Cu_5Ge, powder. Measured counts (black crosses) and the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line and added to a smooth background estimate. No fit is shown because we have no satisfactory description of the pattern.

La2_2PdAu2_2

The pattern of La2_2PdAu2_2 is not well explained. No combination of phases we tried fits it, and the best one misses about half the intensity of the strongest line, at 32.54° (Figure S33). The predicted C2/m structure is not present, because its two strongest lines, at 31.13 and 37.32°, show no intensity above the background. What formed is not identified.

Figure S33. La2_2PdAu2_2. Measured counts (black crosses) and the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line and added to a smooth background estimate. No fit is shown because we have no satisfactory description of the pattern.

Ti2_2Pt8_8Ge

The predicted P4/mmmP4/mmm structure of Ti2_2Pt8_8Ge does not match the pattern, which was measured on a saw-cut face of the as-cast button (Figure S34). The strongest observed lines index on a nearly cubic, Pt-rich fcc-type cell, while the tetragonal cell of the prediction places lines at 40.4 and 49.8°, where the data show none. We have no satisfactory description of the whole pattern, so what formed is not identified.

Figure S34. Ti2_2Pt8_8Ge, as-cast, measured on a saw-cut face. Measured counts (black crosses) and the pattern of the predicted structure simulated from its computed crystal structure, with line widths taken from the measured pattern (blue), scaled to the strongest observed line and added to a smooth background estimate. No fit is shown because we have no satisfactory description of the pattern.

ScPdCu4_4

The patterns of ScPdCu4_4 show only broad features, without well-defined lines (Figure S35). The three buttons we measured gave similar patterns (Table S1). The pattern computed from the predicted structure does not match them, and we could not identify the phases that formed.

Table S1. Arc-melted buttons of the 34 candidates, grouped and numbered as in Table I. Button: the button whose sample number identifies the candidate in the paper. Earlier attempt: a button of the same composition that this button replaced. Remake: a later button of the same composition. Mass loss in percent in parentheses, with – where it was not recorded. †: not scanned. Pattern of record: the pattern that gives the outcome, as cast or annealed, instrument (D500, Siemens D500; PAN, PANalytical), mount (ZB, powder on a zero-background Si slide; PMMA, powder on a poly(methyl methacrylate) slide; bulk, a piece of the button, measured without grinding). Annealed: 1000 ∘C1000\,^\circ\mathrm{C} for one week.

#CompoundButtonEarlier attemptRemakePattern of record
On-hull structure
1ZrPt5Si\mathrm{ZrPt}_{5}\mathrm{Si}0561 (1.0)0482 (0.3)0561 annealed, D500, ZB
2YAl3Cu2\mathrm{YAl}_{3}\mathrm{Cu}_{2}0540 (3.0)0506 (14.3)0615 (2.1)0615 annealed, D500, ZB
3GdPt2Ge\mathrm{GdPt}_{2}\mathrm{Ge}0480 (0.3)0480 annealed, D500, ZB
4TiPt5Si\mathrm{TiPt}_{5}\mathrm{Si}0493 (1.9)0493 annealed, D500, ZB
5YSnCu\mathrm{YSnCu}0507 (0.4)0507 as cast, D500, PMMA
6ScCrC2\mathrm{ScCrC}_{2}0512 (3.0)0605 (–)0605 as cast, D500, PMMA
Above-hull polymorph
7YCoSi\mathrm{YCoSi}0538 (<0.1)0503 (<0.1)0538 as cast, D500, PMMA
8YCoSi3\mathrm{YCoSi}_{3}0539 (0.5)0504 (2.9)0539 annealed, D500, ZB
Disordered parent of on-hull structure
9Al8FeCo7\mathrm{Al}_{8}\mathrm{FeCo}_{7}0535 (0.6)0487 (9.4)0535 as cast, D500, PMMA
10Hf2MoIr\mathrm{Hf}_{2}\mathrm{MoIr}0466 (0.6)0466 annealed, D500, ZB
11Al4FeCo3\mathrm{Al}_{4}\mathrm{FeCo}_{3}0545 (0.8)0486 (3.9)0534 (3.3), 0544 (10.9)†0545 as cast, D500, PMMA
12Sc2PdCu\mathrm{Sc}_{2}\mathrm{PdCu}0474 (0.1)0474 as cast, PAN, bulk
13Sc3Pd2Cu\mathrm{Sc}_{3}\mathrm{Pd}_{2}\mathrm{Cu}0473 (0.2)0473 annealed, D500, PMMA
14ScPd5Au2\mathrm{ScPd}_{5}\mathrm{Au}_{2}0477 (15.6)0477 as cast, PAN, bulk
15Al2MnAu6\mathrm{Al}_{2}\mathrm{MnAu}_{6}0479 (2.0)0479 as cast, D500, PMMA
16Sc2Pd5Au\mathrm{Sc}_{2}\mathrm{Pd}_{5}\mathrm{Au}0478 (0.5)0610 (1.0)0610 as cast, D500, PMMA
17PtNiGe2\mathrm{PtNiGe}_{2}0481 (0.2)0481 as cast, D500, PMMA
18Gd3Sn6Co\mathrm{Gd}_{3}\mathrm{Sn}_{6}\mathrm{Co}0556 (2.0)0489 (4.5)0536 (9.5)0556 as cast, D500, PMMA
Other solid solution
19ScPd2Au\mathrm{ScPd}_{2}\mathrm{Au}0476 (0.2)0476 as cast, D500, PMMA
Multiphase, on-hull structure not formed
20ScPd2Cu\mathrm{ScPd}_{2}\mathrm{Cu}0469 (1.2)0469 as cast, D500, PMMA
21La5Al3Co2\mathrm{La}_{5}\mathrm{Al}_{3}\mathrm{Co}_{2}0483 (<0.1)0483 as cast, D500, PMMA
22TiPt5Ge\mathrm{TiPt}_{5}\mathrm{Ge}0491 (1.4)0491 as cast, D500, PMMA
23Ti2Pt8Si\mathrm{Ti}_{2}\mathrm{Pt}_{8}\mathrm{Si}0494 (0.4)0494 as cast, D500, PMMA
24LaNiSi3\mathrm{LaNiSi}_{3}0514 (2.2)0514 as cast, D500, PMMA
25GdSn6Co4\mathrm{GdSn}_{6}\mathrm{Co}_{4}0537 (0.5)0490 (11.1)0537 as cast, D500, PMMA
26NbNi2B2\mathrm{NbNi}_{2}\mathrm{B}_{2}0510 (0.5)0510 as cast, D500, PMMA
27GdFeGe2\mathrm{GdFeGe}_{2}0555 (1.5)0497 (5.4)0555 as cast, D500, PMMA
28Gd2Fe3Ge5\mathrm{Gd}_{2}\mathrm{Fe}_{3}\mathrm{Ge}_{5}0554 (4.5)0496 (1.8)0557 (5.0)†0554 as cast, D500, PMMA
29GdFeGe3\mathrm{GdFeGe}_{3}0553 (2.3)0495 (2.3)0553 as cast, D500, PMMA
30LaRuC2\mathrm{LaRuC}_{2}0513 (6.3)0614 (0.6), 0617 (2.2)0614 as cast, D500, PMMA
On-hull structure did not form but structure(s) unresolved
31Pd6Cu5Ge\mathrm{Pd}_{6}\mathrm{Cu}_{5}\mathrm{Ge}0465 (0.3)0568 (1.6), 0608 (1.1)0568 as cast, D500, PMMA
32La2PdAu2\mathrm{La}_{2}\mathrm{PdAu}_{2}0475 (0.9)0475 as cast, D500, PMMA
33Ti2Pt8Ge\mathrm{Ti}_{2}\mathrm{Pt}_{8}\mathrm{Ge}0492 (0.5)0492 as cast, D500, bulk
34ScPdCu4\mathrm{ScPdCu}_{4}0472 (5.1)0558 (13.0)†, 0566 (4.7), 0613 (4.5)0472 as cast, D500, PMMA

Figure S35. ScPdCu4_4. Measured counts (black crosses) and, above them, the pattern computed from the predicted structure with a line width of 0.15∘0.15^\circ and no background (blue). No fit is shown because we have no satisfactory description of the pattern.

References

  1. [1]S. Curtarolo, G. L. W. Hart, M. B. Nardelli, N. Mingo, S. Sanvito, and O. Levy, The high-throughput highway to computational materials design, Nature Materials 12, 191 (2013).DOI
  2. [2]A. R. Oganov, A. G. Kvashnin, and G. Saleh, Computational materials discovery: Dream or reality?, in Computational Materials Discovery (The Royal Society of Chemistry, 2018) pp. 1–14.
  3. [3]P. García, Discovery by serendipity: a new context for an old riddle, Foundations of Chemistry 11, 33 (2009).DOI
  4. [4]K. Shahzad, A. I. Mardare, and A. W. Hassel, Accelerating materials discovery: combinatorial synthesis, high-throughput characterization, and computational advances, Science and Technology of Advanced Materials: Methods 4, 2292486 (2024).DOI
  5. [5]J. Shen, S. D. Griesemer, A. Gopakumar, B. Baldassarri, J. E. Saal, M. Aykol, V. I. Hegde, and C. Wolverton, Reflections on one million compounds in the Open Quantum Materials Database (OQMD), Journal of Physics: Materials 5, 031001 (2022).DOI
  6. [6]M. K. Horton, P. Huck, R. X. Yang, J. M. Munro, S. Dwaraknath, A. M. Ganose, R. S. Kingsbury, M. Wen, J. X. Shen, T. S. Mathis, A. D. Kaplan, K. Berket, J. Riebelssell, J. George, A. S. Rosen, E. W. C. Spotte-Smith, M. J. McDermott, O. A. Cohen, A. Dunn, M. C. Kuner, G.-M. Rignanese, G. Pretto, D. Waroquiers, S. M. Griffin, J. B. Neaton, D. C. Chrzan, M. Asta, G. Hautier, S. Cholia, G. Ceder, S. P. Ong, A. Jain, and K. A. Persson, Accelerated data-driven materials science with the Materials Project, Nature Materials 24, 1522 (2025).DOI
  7. [7]T. Cavignac, J. Schmidt, P.-P. De Breuck, A. Loew, T. F. T. Cerqueira, H.-C. Wang, A. Bochkarev, Y. Lysogorskiy, A. H. Romero, R. Drautz, S. Botti, and M. A. L. Marques, AI-driven expansion and application of the Alexandria database, Journal of Physics: Materials 9, 025014 (2026).
  8. [8]A. Merchant, S. Batzner, S. S. Schoenholz, M. Aykol, G. Cheon, and E. D. Cubuk, Scaling deep learning for materials discovery, Nature 624, 80 (2023).
  9. [9]C. Zeni, R. Pinsler, D. Zügner, A. Fowler, M. Horton, X. Fu, Z. Wang, A. Shysheya, J. Crabbé, S. Ueda, R. Sordillo, L. Sun, J. Smith, B. Nguyen, H. Schulz, S. Lewis, C.-W. Huang, Z. Lu, Y. Zhou, H. Yang, H. Hao, J. Li, C. Yang, W. Li, R. Tomioka, and T. Xie, A generative model for inorganic materials design, Nature 639, 624 (2025).DOI
  10. [10]H. Metni, L. Ruple, L. N. Walters, L. Torresi, J. Teufel, H. Schopmans, J. Östreicher, Y. Zhang, M. Neubert, Y. Koide, K. Steiner, P. Link, L. Bär, M. Petrova, G. Ceder, and P. Friederich, Generative models for crystalline materials, Advanced Materials 38, e23620 (2026).
  11. [11]J. E. Saal, S. Kirklin, M. Aykol, B. Meredig, and C. Wolverton, Materials design and discovery with high-throughput density functional theory: The Open Quantum Materials Database (OQMD), JOM 65, 1501 (2013).DOI
  12. [12]A. Jain, S. P. Ong, G. Hautier, W. Chen, W. D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinnner, G. Ceder, and K. A. Persson, Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1, 011002 (2013).DOI
  13. [13]J. Schmidt, T. F. Cerqueira, A. H. Romero, A. Loew, F. Jäger, H.-C. Wang, S. Botti, and M. A. Marques, Improving machine-learning models in materials science through large datasets, Materials Today Physics 48, 101560 (2024).
  14. [14]K. Choudhary and K. Garrity, Designing high-TC superconductors with BCS-inspired screening, density functional theory, and deep-learning, npj Computational Materials 8, 244 (2022).DOI
  15. [15]D. Wines, K. Choudhary, A. J. Biacchi, K. F. Garrity, and F. Tavazza, High-throughput DFT-based discovery of next generation two-dimensional (2D) superconductors, Nano Letters 23, 969 (2023).DOI
  16. [16]T. F. T. Cerqueira, A. Sanna, and M. A. L. Marques, Sampling the materials space for conventional superconducting compounds, Advanced Materials 36, 2307085 (2024).DOI
  17. [17]J. B. Gibson, A. C. Hire, P. Prakash, P. M. Dee, B. Geisler, J. S. Kim, Z. Li, J. J. Hamlin, G. R. Stewart, P. J. Hirschfeld, and R. G. Henning, Developing a complete AI-accelerated workflow for semiconductor discovery, npj Computational Materials 12, 95 (2026).
  18. [18]J. B. Gibson, A. C. Hire, P. M. Dee, O. Barrera, B. Geisler, P. J. Hirschfeld, and R. G. Hennig, Accelerating superconductor discovery through tempered deep learning of the electron-phonon spectral function, npj Computational Materials 11, 7 (2025).DOI
  19. [19]T. Zhang, Y. Jiang, Z. Song, H. Huang, Y. He, Z. Fang, H. Weng, and C. Fang, Catalogue of topological electronic materials, Nature 566, 475 (2019).
  20. [20]N. C. Frey, M. K. Horton, J. M. Munro, S. M. Griffin, K. A. Persson, and V. B. Shenoy, High-throughput search for magnetic and topological order in transition metal oxides, Science Advances 6, eabd1076 (2020).DOI
  21. [21]Y. Su, J. Hu, X. Cai, W. Shi, Y. Xia, Y. Xu, X. Xu, Y. Chen, and G. Li, High-throughput first-principle prediction of collinear magnetic topological materials, npj Computational Materials 8, 261 (2022).DOI
  22. [22]M. G. Vergniory, L. Elcoro, C. Felser, N. Regnault, B. A. Bernevig, and Z. Wang, A complete catalogue of high-quality topological materials, Nature 566, 480 (2019).DOI
  23. [23]Y. Xu, L. Elcoro, Z.-D. Song, B. J. Wieder, M. G. Vergniory, N. Regnault, Y. Chen, C. Felser, and B. A. Bernevig, High-throughput calculations of magnetic topological materials, Nature 586, 702 (2020).
  24. [24]I. Robredo, Y. Xu, Y. Jiang, C. Felser, B. A. Bernevig, L. Elcoro, N. Regnault, and M. G. Vergniory, New magnetic topological materials from high-throughput search, Science Advances 11, eadv8780 (2025).
  25. [25]K. Choudhary, K. F. Garrity, N. J. Ghimire, N. Anand, and F. Tavazza, High-throughput search for magnetic topological materials using spin-orbit spillage, machine learning, and experiments, Physical Review B 103, 155131 (2021).DOI
  26. [26]A. Sufyan, B. Marfoua, J. A. Larsson, E. van Loon, and R. Armento, High-throughput quantification of altermagnetic band splitting, Physical Review Materials 10, 044407 (2026).
  27. [27]J. Södequist and T. Olsen, Two-dimensional altermagnets from high throughput computational screening: Symmetry requirements, chiral magnons, and spin-orbit effects, Applied Physics Letters 124, 182409 (2024).
  28. [28]X. Wan, S. Mandal, Y. Guo, and K. Haule, High-throughput search for metallic altermagnets by embedded dynamical mean field theory, Physical Review Letters 135, 106501 (2025).
  29. [29]H. Park, K. O. Mastej, P. Detrattanawichai, R. Nduma, and A. Walsh, Closing the synthesis gap in computational materials design, Nature Synthesis 5, 651 (2026).DOI
  30. [30]A. K. Cheetham and R. Seshadri, Artificial intelligence driving materials discovery? Perspective on the article: Scaling deep learning for materials discovery, Chemistry of Materials 36, 3490 (2024).DOI
  31. [31]J. Leeman, Y. Liu, J. Stiles, S. B. Lee, P. Bhatt, J. M. Schoop, and R. G. Palgrave, Challenges in high-throughput inorganic materials prediction and autonomous synthesis, PRX Energy 3, 011002 (2024).DOI
  32. [32]R. Gautier, X. Zhang, L. Hu, L. Yu, Y. Lin, T. O. L. Sunde, D. Chon, K. R. Poeppelmeier, and A. Zunger, Prediction and accelerated laboratory discovery of previously unknown (18-electron ABX compounds, Nature Chemistry 7, 308 (2015).DOI
  33. [33]A. Narayan, A. Bhutani, S. Rubeck, J. N. Eckstein, D. P. Shoemaker, and L. K. Wagner, Computational and experimental investigation for new transition metal selenides and sulfides: The importance of experimental verification for stability, Physical Review B 94, 045105 (2016).DOI
  34. [34]J. H. Montoya, C. Grimley, M. Aykol, C. Ophus, H. Sternlicht, B. H. Savitzky, A. M. Minor, S. B. Torrisi, J. Goedjen, C.-C. Chung, A. H. Comstock, and S. Sun, How the AI-assisted discovery and synthesis of a ternary oxide highlights capability gaps in materials science, Chemical Science 15, 5660 (2024).DOI
  35. [35]L. N. Walters, Y. Fei, B. Rendy, X. Yang, M. Diallo, K. Jun, G. Wei, M. J. McDermott, A. Giunto, T. Mishra, F. Shen, D. Milsted, M. Sabai Oo, H. Kim, M. C. Tucker, and G. Ceder, Synthetic accessibility and sodium ion conductivity in the Na₈₋ₓAₓP₂O₉ (NAP) high-temperature sodium superionic conductor framework, Chemistry of Materials 37, 6807 (2025).
  36. [36]N. J. Szymanski, B. Rendy, Y. Fei, R. E. Kumar, T. He, D. Milsted, M. J. McDermott, M. Gallant, E. D. Cubuk, A. Merchant, H. Kim, A. Jain, C. J. Bartel, K. Persson, Y. Zeng, and G. Ceder, An autonomous laboratory for the accelerated synthesis of inorganic materials, Nature 624, 86 (2023).DOI
  37. [37]T. Yamamoto, Y. Otsubo, T. Nagase, T. Kosuge, and M. Azuma, Synthesis and structure of vacancy-ordered perovskite Ba₆Ta₂Na₂X₂O₁₇ (X = P, V): Significance of structural model selection on discovered compounds, Inorganic Chemistry 63, 4482 (2024).DOI
  38. [38]D. Widdowson and V. Kurlin, Geographic-style maps with a local novelty distance help navigate in the materials space, Scientific Reports 15, 27588 (2025).DOI
  39. [39]N. J. Szymanski, B. Rendy, Y. Fei, R. E. Kumar, T. He, D. Milsted, M. J. McDermott, M. Gallant, E. D. Cubuk, A. Merchant, H. Kim, A. Jain, C. J. Bartel, K. Persson, Y. Zeng, and G. Ceder, Author correction: An autonomous laboratory for the accelerated synthesis of inorganic materials, Nature 650, E1 (2026).DOI
  40. [40]T. Prein, W. O’Leary, A. F. Savvidou, E. Bourneix, and J. E. M. Raulaine, A synthesizability-guided pipeline for materials discovery (2025), arXiv:2511.01790.arxiv.org/abs/2511.01790
  41. [41]M. Juelsholt, Continued challenges in high-throughput materials predictions: MatterGen predicts compounds from the training dataset, Materials Horizons 13, 5672 (2026).DOI
  42. [42]D. Zagorac, H. Müller, S. Ruehl, J. Zagorac, and S. Rehme, Recent developments in the Inorganic Crystal Structure Database: theoretical crystal structure data and related features, Journal of Applied Crystallography 52, 918 (2019).DOI
  43. [43]O. I. Bodak, L. A. Muratova, I. R. Mokra, V. I. Yarovets, A. S. Sobolev, and E. I. Gladyshевskii, Yttrium–nickel, cobalt, molybdenum, or cerium–silicon and yttrium–germanium–silicon ternary systems, in Struktura Faz, Fazovye Prevrascheniya i Diagrammy Sostoyaniya Metallicheskikh Sistem, edited by O. S. Ivanov and Z. M. Alekseeva (Nauka, Moscow, 1974) pp. 182–186, in Russian.
  44. [44]K. S. Jakob, A. Walsh, K. Reuter, and J. T. Margraf, Learning crystallographic disorder: Bridging prediction and experiment in materials discovery, Advanced Materials 38, e14226 (2026).
  45. [45]T. Krachan, B. Stel’makhovych, and Y. Kuz’ma, The Y–Cu–Al system, Journal of Alloys and Compounds 349, 134 (2003).
  46. [46]K. Kadir, T. Sakai, I. Uehara, and L. Eriksson, YCu₃Al₂, an example of an AB₅ structure type, Acta Crystallographica Section C: Crystal Structure Communications 57, 999 (2001).
  47. [47]C. P. Sebastian, C. Fehse, H. Eckert, R.-D. Hoffmann, and R. Pöttgen, Structure, ¹¹⁹Sn solid state NMR and Mössbauer spectroscopy of RECuSn, Solid State Sciences 8, 1386 (2006).
  48. [48]R. Pöttgen, A. M. Witte, W. Jeitschko, and T. Ebel, Preparation, properties, and crystal structures of α- and β-ScCrC₂, Journal of Solid State Chemistry 119, 324 (1995).DOI
  49. [49]P. Rogl, Phase equilibria in ternary and higher order systems with rare earth elements and silicon, in Handbook on the Physics and Chemistry of Rare Earths, Vol. 7 (Elsevier, Amsterdam, 1984) Chap. 51, pp. 1–264.
  50. [50]S. Kirklin, J. E. Saal, B. Meredig, A. Thompson, J. W. Doak, M. Aykol, S. Rühl, and C. Wolverton, The Open Quantum Materials Database (OQMD): assessing the accuracy of DFT formation energies, npj Computational Materials 1, 15010 (2015).DOI
  51. [51]D. Antyipov, C. M. Collins, M. S. Dyer, J. B. Claridge, and M. J. Rosseinsky, Classification and statistical analysis of structural disorder in crystalline materials, Journal of Applied Crystallography 58, 659 (2025).DOI
  52. [52]M. Ångqvist, W. A. Muñoz, J. M. Rahm, E. Fransson, C. Durniak, P. Rozyczko, T. H. Rod, and P. Erhart, ICET – a Python library for constructing and sampling alloy cluster expansions, Advanced Theory and Simulations 2, 1900015 (2019).DOI
  53. [53]F. T. Cerasoli and D. Donadio, Effective optimization of atomic decoration in giant and superstructurally ordered crystals with machine learning, The Journal of Chemical Physics 161, 044101 (2024).DOI
  54. [54]C. J. Bartel, A. W. Weimer, S. Lany, C. B. Musgrave, and A. M. Holder, The role of decomposition reactions in assessing first-principles predictions of solid stability, npj Computational Materials 5, 4 (2019).DOI
  55. [55]H. Yang, C. Hu, Y. Zhou, X. Liu, Y. Shi, J. Li, G. Li, Z. Chen, S. Chen, C. Zeni, M. Horton, R. Pinsler, A. Fowler, D. Zügner, T. Xie, J. Smith, L. Sun, Q. Wang, L. Kong, C. Liu, H. Hao, and Z. Lu, Matter-Sim: A deep learning atomistic model across elements, temperatures and pressures, arXiv:2405.04967 (2024), arXiv:2405.04967 [cond-mat.mtrl-sci].arxiv.org/abs/2405.04967
  56. [56]X.-Q. Qian, Z.-F. Gao, W.-K. Li, P. Guo, and Z.-Y. Lu, PhononBench: A large-scale phonon-based benchmark for dynamical stability in crystal generation, AI for Science 2, 035005 (2026).
  57. [57]A. Togo, First-principles phonon calculations with phonopy and phono3py, Journal of the Physical Society of Japan 92, 012001 (2023).DOI
  58. [58]A. Togo, L. Chaput, T. Tadano, and I. Tanaka, Implementation strategies in phonopy and phono3py, Journal of Physics: Condensed Matter 35, 353001 (2023).DOI
  59. [59]H. Lukas, S. G. Fries, and B. Sundman, Computational Thermodynamics: The Calphad Method (Cam-
  60. [60]C. J. Bartel, S. L. Millican, A. M. Deml, J. R. Rumptz, W. Tumas, A. W. Weimer, S. Lany, V. Stevanović, C. B. Musgrave, and A. M. Holder, Physical description of the Gibbs energy of inorganic crystalline solids and temperature-dependent materials chemistry, Nature Communications 9, 4168 (2018).DOI
  61. [61]A. Akrap, D. Bordelon, S. Chatterjee, E. D. Dahlberg, R. P. Devaty, S. M. Frolov, C. Gould, L. H. Greene, S. Guchhait, J. J. Hamlin, B. M. Hunt, M. J. A. Jardine, M. Kayyahlа, R. C. Kurchin, V. Kozii, H. F. Legg, I. I. Mazin, V. Mourik, A. B. Özğüler, J. Peñuela-Parra, B. Seradjeh, B. Skinner, K. F. Quader, and J. P. Zwolak, Report on reproducibility in condensed matter physics, Physical Review B 113, 119601 (2026).DOI
  62. [62]J. J. Hamlin, jhamlin-ulf/synthesizability: code and data, Zenodo (2026).
  63. [63]E. Blokhin and P. Villars, The PAULING FILE project and materials platform for data science: From big data toward materials genome, in Handbook of Materials Modeling, edited by W. Andreoni and S. Yip (Springer, Cham, 2020) pp. 1837–1861.
  64. [64]K. Gao, T. F. T. Cerqueira, A. Sanna, Y.-W. Fang, D. Dangic, I. Errea, H.-C. Wang, S. Botti, and M. A. L. Marques, The maximum T_c of conventional superconductors at ambient pressure, Nature Communications 16, 8253 (2025).DOI
  65. [65]S. P. Ong, W. D. Richards, A. Jain, G. Hautier, M. Kocher, S. Cholia, D. Gunter, V. L. Chevrier, K. A. Persson, and G. Ceder, Python Materials Genomics (pymatgen): A robust, open-source Python library for materials analysis, Computational Materials Science 68, 314 (2013).
  66. [66]S. N. Kabekkodu, A. Dosen, and T. N. Blanton, PDF-5+: a comprehensive Powder Diffraction File for materials characterization, Powder Diffraction 39, 47 (2024).DOI
  67. [67]S. Graužulis, A. Daškevič, A. Merkys, D. Chateigner, L. Lutterotti, M. Quiros, N. R. Serebryanaya, P. Moeck, R. T. Downs, and A. Le Bail, Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration, Nucleic Acids Research 40, D420 (2012).
  68. [68]H. M. Rietveld, A profile refinement method for nuclear and magnetic structures, Journal of Applied Crystallography 2, 65 (1969).
  69. [69]B. H. Toby and R. B. Von Dreele, GSAS-II: the genesis of a modern open-source all purpose crystallography software package, Journal of Applied Crystallography 46, 544 (2013).DOI
  70. [70]P. W. Stephens, Phenomenological model of anisotropic peak broadening in powder diffraction, Journal of Applied Crystallography 32, 281 (1999).DOI
  71. [71]W. A. Dollase, Correction of intensities for preferred orientation in powder diffractometry: application of the March model, Journal of Applied Crystallography 19, 267 (1986).DOI
  72. [72]B. H. Toby, R factors in Rietveld analysis: How good is good enough?, Powder Diffraction 21, 67 (2006).DOI
  73. [73]M. Jemmali, S. Walha, H. Noël, and R. Ben Hassen, Crystal structures and magnetic properties of the RFe₁−xGe₂ (R = Gd, Er) compounds, Chemistry of Metals and Alloys 3, 126 (2010).DOI
  74. [74]A. Gil, B. Penc, E. Wawrzyńska, J. Hernandez-Velasco, A. Szytuła, and A. Zygmunt, Magnetic properties and magnetic structures of RCo₂Sn₂ (R=Gd–Er) compounds, Journal of Alloys and Compounds 365, 31 (2004).
  75. [75]M. Pani, P. Manfrinetti, A. Provino, F. Yuan, Y. Mozharivskyj, A. V. Morozkin, A. Knotko, A. Garshev, V. O. Yapaskurt, and O. Isnard, New tetragonal derivatives of cubic NaZn₁₃-type structure: RNi₆Si₆ compounds, crystal structure and magnetic ordering (R=Y, La, Ce, Sm, Gd–Yb), J. Solid State Chem. 210, 45 (2014).DOI
  76. [76]A. Tursina, K. Kalmykov, I. Chernyshev, S. Philippova, and S. Nesterenko, Intermetallics La₄M₃Al₃ and La₄M₅Al₂ (M = Co, Ni) with M/Al slabs as building blocks, J. Solid State Chem. 322, 123966 (2023).DOI
  77. [77]T. M. Krachan, Phase equilibria and crystal structure of compounds in the Y–{Cu, Ag}–Al, {Y, La}–Ag–Ga and related systems, Ph.D. thesis, Ivan Franko National University of Lviv, Lviv, Ukraine (2018).

Paper details

vlnc:W_stppb9ts
Version
v2 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 13

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Opus 4.6, Opus 5.5, Claude Fable 5.1 (bare), Sonnet 5.5

View statement
Looking for related papers…
Contents