betaFeedback

WorksPhysics and Astronomy

Hot QCD at finite isospin density: confronting SU(3) Nambu-Jona-Lasinio model with recent lattice data

Abstract

Extending our recently published SU(2)SU(2) results for zero temperature we now compute the QCD equation of state for finite isospin density within the three flavor Nambu-Jona-Lasinio model in the mean field approximation, motivated by the recently obtained Lattice QCD results for both zero and finite temperatures. Like our previous study, here also we have considered both the commonly used Traditional cutoff Regularization Scheme and the Medium Separation Scheme. Our results are compared with recent high-precision lattice simulations as well as previously obtained results in two-flavor Nambu-Jona-Lasinio model. The agreement between the lattice results and the predictions from three-flavor NJL model is very good for low values of μIμ_I (for both zero and finite temperatures). For larger values of μIμ_I, the agreement between lattice data and the two-flavor NJL predictions is surprisingly good and better than with the three-flavor predictions.

Introduction

As the fundamental theory of strong interactions, the phase structure of Quantum Chromodynamics (QCD) has been studied from different angles over the years. Aside from the well explored systems at finite temperatures and finite baryon densities, several new dimensions have been added to the QCD phase diagrams: isospin chemical potential, magnetic field, electric field, rotation to name a few. Though near future relativistic Heavy-Ion-Collision (HIC) experiments in FAIR and NICA have been continuing to inspire studies of physical systems at low temperatures and finite baryon densities such as neutron stars [1, 2], theoretical hurdles are still there, predominantly due to the well known fermion “sign problem” [3, 4] encountered by non-perturbative lattice calculations. Lattice QCD’s recent progress with the sign problem can be monitored in Ref [5].

Among the relatively new features of the QCD phase diagram, finite isospin chemical potential (μI\mu_I) plays an important role, specially because unlike finite baryon chemical potential it does not suffer from the sign problem in lattice QCD based calculations. First bunch of lattice QCD results at finite temperature and isospin density appeared in early 2000’s [6, 7] with dynamical uu and dd quarks, although with unphysical pion masses and/or an unphysical flavour content. This followed various studies by other available theoretical tools yielding qualitatively similar results. These studies include chiral perturbation theory (χ\chiPT) [8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20], Hard Thermal Loop perturbation theory (HTLPt) [21], Nambu-Jona-Lasinio (NJL) model [22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42] and its Polyakov loop extended version PNJL [43, 44], quark meson model (QMM) [45, 46, 47, 48]. Recently, early lattice QCD results have been modified by

using an improved lattice action with staggered fermions at physical quark masses and results for finite isospin density are presented in Refs [49, 50, 51, 52].

In our recent work along the similar line [53], we focused on a new type of compact stars known as pion stars [11, 54], where the pion condensates are considered to be the dominant constituents of the core under the circumstance of vanishing neutron density. In spite of being a subset of boson stars [55, 56, 57, 58, 59], pion stars are free from hypothetical beyond standard model contributions like QCD axion. This gave us a scenario to work with finite isospin density along with zero temperature and zero baryon density which bypasses the sign problem unlike systems with high baryon densities. Hence it is easily accessible through first principle methods [54] and through the pion stars’ Equation of State (EoS) we now know about its large mass and radius in comparison with neutron stars [54, 60]. Our study in the said context of pion stars within two flavor NJL model showed better quantitative agreement with the lattice QCD results than similar studies within the chiral perturbation theory [18].

Unlike our last study [53] where we have only considered the setting of pion stars with zero temperature, in the present work we plan also to explore the systems with finite temperature. Early universe with very high temperature has been known to have possibilities of pion condensation driven by high lepton asymmetry [61, 62, 63]. Furthermore, in this work we have extended our two-flavor study within the three flavor NJL model. While the two-flavor studies are sufficient to describe the pion condensation at finite isospin density, a three-flavor study gives us the chance to explore the roles of the strangeness degree of freedom and the UA(1)U_A(1) anomaly in the present context. Hence in our three flavor NJL Lagrangian, we will also be considering the Kobayashi-Maskawa-’t Hooft (KMT) term, which mimics the UA(1)U_{A}(1) anomaly in the NJL model.

Just like QCD systems with μI≠0\mu_{I} \ne0, μB=μs=T=0\mu_{B} = \mu_{s} = T = 0 [54], QCD systems with μI≠0\mu_{I} \ne0, μB=0\mu_{B} = 0, μs≠0\mu_{s} \ne0, T≠0T \ne0 are also being explored well within lattice QCD [49, 52, 64, 65, 66]. Successful premises of this work have already been provided by our previous study [53] which showed an exceptional quantitative agreement between NJL and lattice QCD results. On the basis of that and recent improved three flavor lattice QCD results at zero and finite temperature [49, 52, 54, 64, 65, 66] give us the perfect opportunity for the consistency check of the NJL model. As in our previous work [53] we have tried to rectify the regularization issues within NJL model to deal with the cutting of important degrees of freedom near the Fermi surface because of a sharp ultraviolet (UV) cutoff [67, 68, 69]. Besides the commonly used Traditional Regularization Scheme (TRS) we have used the Medium Separation Scheme (MSS) [67, 70, 71], which properly separates the medium effects from divergent integrals. For systems with high values of μI\mu_{I} (∼Λ\sim\Lambda) the role of MSS becomes more and more important.

The paper is organized as follows. In section II we discuss the basic formalism of the three-flavor NJL model both within TRS and MSS. In section III we present and discuss our results obtained with the traditional regularization scheme and with the medium separation scheme, for both zero and finite temperature. Thermodynamic results and the T−μIT-\mu_{I} phase diagram are also presented and compared with other state of the art calculations.

Formalism

We start with the partition function for the three-flavor NJL model at finite baryonic and isospin chemical potential, given by

ZNJL(T,μB,μI,μS)=∫[dψˉ][dψ]×exp⁡[∫0βdτ∫d3x(LNJL+ψˉμ^γ0ψ)],(1)Z_{\mathrm{NJL}}(T,\mu_{B},\mu_{I},\mu_{S})=\int[d\bar{\psi}][d\psi]\times \exp\left[\int_{0}^{\beta}d\tau\int d^{3}x\left(\mathcal{L}_{\mathrm{NJL}}+\bar{\psi}\hat{\mu}\gamma^{0}\psi\right)\right], \tag*{(1)}

where the quark chemical potential matrix in flavor space is

μ^=(μu000μd000μs),(2)\hat{\mu}= \begin{pmatrix} \mu_{u} & 0 & 0\\ 0 & \mu_{d} & 0\\ 0 & 0 & \mu_{s} \end{pmatrix}, \tag*{(2)}

and μu,d,s\mu_{u,d,s} can be expressed in terms of the baryonic, the isospin and the strangeness chemical potential as

μu=μB3+μI,\mu_{u}=\frac{\mu_{B}}{3}+\mu_{I},
μd=μB3−μI,\mu_{d}=\frac{\mu_{B}}{3}-\mu_{I},
μs=μB3−μS,\mu_{s}=\frac{\mu_{B}}{3}-\mu_{S},

such that μI=(μu−μd)/2\mu_{I}=(\mu_{u}-\mu_{d})/2. LNJL\mathcal{L}_{\mathrm{NJL}} appearing in Eq. (1) is the NJL Lagrangian considering scalar and pseudoscalar interactions, i.e.

LNJL=ψˉ(i̸ ⁣∂−m)ψ+G∑α=0Nf2−1[(ψˉλαψ)2+(ψˉiγ5λαψ)2]−K[det⁡ψˉ(1+γ5)ψ+det⁡ψˉ(1−γ5)ψ].\mathcal{L}_{\mathrm{NJL}}=\bar{\psi}(i\not\!\partial-m)\psi+G\sum_{\alpha=0}^{N_{f}^{2}-1}\left[(\bar{\psi}\lambda_{\alpha}\psi)^{2}+(\bar{\psi}i\gamma_{5}\lambda_{\alpha}\psi)^{2}\right]-K\left[\det\bar{\psi}(1+\gamma_{5})\psi+\det\bar{\psi}(1-\gamma_{5})\psi\right].

where ψ=(u d s)T\psi=(u\ d\ s)^{T} and m=diag⁡(mu,md,ms)m=\operatorname{diag}(m_{u},m_{d},m_{s}) represent the quark fields and their current mass respectively and GG is the scalar coupling constant of the model from the four-fermion interaction. The last term is the KMT term which represents the breaking of the flavor symmetry in the chiral limit due to UA(1)U_{A}(1) anomaly. KK is also known as the UA(1)U_{A}(1) breaking strength.

Next, in the mean field approximation we introduce the chiral condensates

σl=σu/d=−4G⟨uˉu⟩=⟨dˉd⟩,σs=−4G⟨sˉs⟩,(3)\sigma_{l}=\sigma_{u/d}=-4G\langle\bar{u}u\rangle=\langle\bar{d}d\rangle,\qquad\sigma_{s}=-4G\langle\bar{s}s\rangle, \tag*{(3)}

and the pseudoscalar pion condensate

Δ=2(2G−Kσs)⟨uˉiγ5d⟩,(4)\Delta=2(2G-K\sigma_{s})\langle\bar{u}i\gamma_{5}d\rangle, \tag*{(4)}

where Δ\Delta can be considered as real without loss of generality as the related phase factor can be arbitrarily chosen due to the spontaneously broken UI(1)U_{I}(1) symmetry1 [29]. In terms of these condensates, the thermodynamic potential for Nf=2+1N_{f}=2+1 in the mean field approximation is given as

Ω(σl,σs,Δ)=2σl2+σs28G+Kσl2σs16G3+(G+Kσs4G)Δ2(2G+Kσs4G)2−2Nc∫kΛ[Ek++Ek−+Eks+2T×ln⁡{(1+e−βEk−)(1+e−βEk+)(1+e−βEks)}],(5)\Omega(\sigma_{l},\sigma_{s},\Delta)=\frac{2\sigma_{l}^{2}+\sigma_{s}^{2}}{8G}+\frac{K\sigma_{l}^{2}\sigma_{s}}{16G^{3}}+\left(G+\frac{K\sigma_{s}}{4G}\right)\frac{\Delta^{2}}{\left(2G+\frac{K\sigma_{s}}{4G}\right)^{2}}-2N_{c}\int_{k}^{\Lambda}\left[E_{k}^{+}+E_{k}^{-}+E_{k}^{s}+2T\times\ln\left\{\left(1+e^{-\beta E_{k}^{-}}\right)\left(1+e^{-\beta E_{k}^{+}}\right)\left(1+e^{-\beta E_{k}^{s}}\right)\right\}\right], \tag*{(5)}

with Ek±=(Ek±μI2)2+Δ2E_{k}^{\pm}=\sqrt{\left(E_{k}\pm\frac{\mu_{I}}{2}\right)^{2}+\Delta^{2}} with Ekl=k2+Ml2E_{k}^{l}=\sqrt{k^{2}+M_{l}^{2}} and Eks=k2+Ms2E_{k}^{s}=\sqrt{k^{2}+M_{s}^{2}} and the symbol ∫kΛ\int_{k}^{\Lambda} indicates three momentum integrals that need to be regularized. Different effective masses MlM_l and MsM_s are defined as

Ml=ml+σl+Kσlσs8G2,M_l = m_l + \sigma_l + \frac{K\sigma_l\sigma_s}{8G^2},
Ms=ms+σs+Kσl28G2+K2Δ2(2G+Kσs4G)2.M_s = m_s + \sigma_s + \frac{K\sigma_l^2}{8G^2} + \frac{K}{2}\frac{\Delta^2}{\left(2G+\frac{K\sigma_s}{4G}\right)^2}.

where ml=mu=mdm_l = m_u = m_d and msm_s are the current quark masses.

The ground state at finite temperature and isospin chemical potential is determined by minimizing Ω(σl,σs,Δ)\Omega(\sigma_l,\sigma_s,\Delta) with respect to σl\sigma_l, σs\sigma_s and Δ\Delta, i.e. by solving ∂Ω/∂σl=∂Ω/∂σs=∂Ω/∂Δ=0\partial\Omega/\partial\sigma_l = \partial\Omega/\partial\sigma_s = \partial\Omega/\partial\Delta= 0.

In the following subsections we discuss in more details different ways of regularizing these integrals. The thermodynamic quantities, i.e. the pressure, the isospin density and the energy density of the system are then respectively given by

PNJL=−ΩNJL(σl/s=σl/s0;Δ=Δ0),(6)P_{\mathrm{NJL}} = -\Omega_{\mathrm{NJL}}(\sigma_{l/s}=\sigma^0_{l/s};\Delta=\Delta^0), \tag*{(6)}
⟨nI⟩NJL=∂PNJL∂μI,(7)\langle n_I\rangle_{\mathrm{NJL}} = \frac{\partial P_{\mathrm{NJL}}}{\partial\mu_I}, \tag*{(7)}
ϵNJL=−PNJL+μI⟨nI⟩NJL+T∂PNJL∂T.(8)\epsilon_{\mathrm{NJL}} = -P_{\mathrm{NJL}}+\mu_I\langle n_I\rangle_{\mathrm{NJL}}+T\frac{\partial P_{\mathrm{NJL}}}{\partial T}. \tag*{(8)}

Finally, the interaction measure (or trace anomaly) within the NJL model is given by the relation between PNJLP_{\mathrm{NJL}} and ϵNJL\epsilon_{\mathrm{NJL}}, i.e.,

INJL=ϵNJL−3PNJL.(9)I_{\mathrm{NJL}} = \epsilon_{\mathrm{NJL}} - 3P_{\mathrm{NJL}}. \tag*{(9)}

Regularization

Due to the nonrenormalizable nature of the NJL model, any physical quantity determined in its framework will be dependent on the scale of the model Λ\Lambda. In the SU(2) version, the usual regularization schemes consist in to determine Λ\Lambda, the coupling constant GG and current quark mass mu=md=mcm_u=m_d=m_c that reproduce the empirical values of the pion mass mπm_\pi, the pion decay constant fπf_\pi and the quark condensate ⟨ψˉψ⟩\langle\bar{\psi}\psi\rangle. Since our aim is to compare our results with lattice simulations we have used two different sets of parameters, for T=0T=0 and T≠0T\ne0, as can be seen in Table I.

SetsInput parametersOutput parameters
Ifπ=93 MeVf_\pi=93\ \mathrm{MeV}<br>mπ=131.7 MeVm_\pi=131.7\ \mathrm{MeV}<br>⟨ψˉψ⟩1/3=250 MeV\langle\bar{\psi}\psi\rangle^{1/3}=250\ \mathrm{MeV}Λ=659.325 MeV\Lambda=659.325\ \mathrm{MeV}<br>G=2.07835/Λ2G=2.07835/\Lambda^2<br>mc=4.757 MeVm_c=4.757\ \mathrm{MeV}
IIfπ=92.4 MeVf_\pi=92.4\ \mathrm{MeV}<br>mπ=135.5263 MeVm_\pi=135.5263\ \mathrm{MeV}<br>⟨ψˉψ⟩1/3=250 MeV\langle\bar{\psi}\psi\rangle^{1/3}=250\ \mathrm{MeV}Λ=659.325 MeV\Lambda=659.325\ \mathrm{MeV}<br>G=2.07691/Λ2G=2.07691/\Lambda^2<br>mc=4.93651 MeVm_c=4.93651\ \mathrm{MeV}

Table I. Different parameter sets are listed, which have been used in the present study for SU(2) case.

The SU(3) case is much more complicated; the procedure is shown in details in appendix-A and the values obtained are shown in Table II. The two sets represent the parameters we use for two different cases, set-I for the case of zero temperature and set-II for the case of finite temperature, following the value of mπm_\pi used by Lattice QCD respectively for both the cases.

SetsInput parametersOutput parameters
Ifπ=93 MeVf_\pi=93\ \mathrm{MeV}<br>mπ=131.7 MeVm_\pi=131.7\ \mathrm{MeV}<br>mK=490 MeVm_K=490\ \mathrm{MeV}<br>mη=950 MeVm_\eta=950\ \mathrm{MeV}<br>ml=5.3 MeVm_l=5.3\ \mathrm{MeV}Λ=574.68 MeV\Lambda=574.68\ \mathrm{MeV}<br>G=2.2066/Λ2G=2.2066/\Lambda^2<br>K=10.426/Λ5K=10.426/\Lambda^5<br>ms=140 MeVm_s=140\ \mathrm{MeV}
IIfπ=92.4 MeVf_\pi=92.4\ \mathrm{MeV}<br>mπ=135.5263 MeVm_\pi=135.5263\ \mathrm{MeV}<br>mK=497.7 MeVm_K=497.7\ \mathrm{MeV}<br>mη=957.8 MeVm_\eta=957.8\ \mathrm{MeV}<br>ml=5.5 MeVm_l=5.5\ \mathrm{MeV}Λ=608.431 MeV\Lambda=608.431\ \mathrm{MeV}<br>G=1.782/Λ2G=1.782/\Lambda^2<br>K=12.8525/Λ5K=12.8525/\Lambda^5<br>ms=140.305 MeVm_s=140.305\ \mathrm{MeV}

Table II. Different parameter sets are listed, which have been used in the present study for SU(3) case.

The fact that all physical quantities are dependent on Λ\Lambda does not mean that we can just naively use this cutoff in all integrals, since it may lead to incorrect results. In this work we compare the results of two different schemes, namely the traditional regularization scheme (TRS) and

the medium separation scheme (MSS). The TRS is the most common in NJL studies, and consists only in to perform up to Λ\Lambda the integrals that do not depend on temperature, e.g., the first three terms between brackets of the integral in Eq. (5) and its correspondents in the gap equations and thermodynamic quantities, while thermal integrals are performed up to infinity.

By the other hand, MSS provides a tool to disentangle all the medium dependencies from divergent contributions, so that only vacuum integrals remain to be regularized. This scheme has been applied to the NJL model and successfully shows qualitative agreement with lattice simulations and more elaborated theories, as might be seen in Refs. [53, 67, 70, 71]. Let us start for example from integral IΔI_\Delta of Δ\Delta gap equation:

IΔ=∑j=±1∫Λd3k(2π)31(Ekl+jμ)2+Δ2,(10)I_\Delta= \sum_{j=\pm1}\int_\Lambda\frac{d^3k}{(2\pi)^3}\frac{1}{\sqrt{(E_k^l+j\mu)^2+\Delta^2}}, \tag*{(10)}

whose TRS version is obtained just by making the replacement ∫Λd3k(2π)3→∫0Λd3k2π2\int_\Lambda\frac{d^3k}{(2\pi)^3}\to\int_0^\Lambda\frac{d^3k}{2\pi^2}. To use MSS we first rewrite

IΔ=1π∑j=±1∫−∞+∞dx∫Λd3k(2π)31x2+(Ekl+jμ)2+Δ2,(11)I_\Delta= \frac{1}{\pi}\sum_{j=\pm1}\int_{-\infty}^{+\infty}dx\int_\Lambda\frac{d^3k}{(2\pi)^3}\frac{1}{x^2+(E_k^l+j\mu)^2+\Delta^2}, \tag*{(11)}

where, to ease the notation, we made the replacement μI/2→μ\mu_I/2 \to\mu. Using the identity

1x2+(Ekl+jμ)2+Δ2=1x2+k2+M02+M02−Δ2−μ2−M2−2jμEkl(x2+k2+M02)[x2+(Ekl+jμ)2+Δ2](12)\frac{1}{x^2+(E_k^l+j\mu)^2+\Delta^2} = \frac{1}{x^2+k^2+M_0^2} + \frac{M_0^2-\Delta^2-\mu^2-\mathcal{M}^2-2j\mu E_k^l}{(x^2+k^2+M_0^2)\left[x^2+(E_k^l+j\mu)^2+\Delta^2\right]} \tag*{(12)}

Here M0M_0 is the vacuum mass of light quarks, obtained in the T=μ=Δ=0T=\mu=\Delta=0 limit. After two iterations of this identity we obtain

∑j=±11x2+(Ekl+jμ)2+Δ2=2x2+k2+M02+2M(x2+k2+M02)2+2M2+8μ2(Ekl)2(x2+k2+M02)3+∑j=±1(M−2jμEkl)3(x2+k2+M02)3[x2+(Ekl+jμ)2+Δ2](13)\sum_{j=\pm1}\frac{1}{x^2+(E_k^l+j\mu)^2+\Delta^2} = \frac{2}{x^2+k^2+M_0^2} + \frac{2\mathcal{M}}{(x^2+k^2+M_0^2)^2} + \frac{2\mathcal{M}^2+8\mu^2(E_k^l)^2}{(x^2+k^2+M_0^2)^3} + \sum_{j=\pm1}\frac{(\mathcal{M}-2j\mu E_k^l)^3}{(x^2+k^2+M_0^2)^3\left[x^2+(E_k^l+j\mu)^2+\Delta^2\right]} \tag*{(13)}

where we have defined M=M02−Δ2−μ2−Ml2\mathcal{M}=M_0^2-\Delta^2-\mu^2-M_l^2. After some manipulations and performing the integration in xx indicated in (11) we obtain

IΔMSS=2Iquad(M0)−(Ml2−M02+Δ2−2μ2)Ilog(M0)+[3(M2+4μ2Ml2)4−3μ2M02]I1+2I2(14)I_\Delta^{\mathrm{MSS}}=2I_{\mathrm{quad}}(M_0)-(M_l^2-M_0^2+\Delta^2-2\mu^2)I_{\mathrm{log}}(M_0)+\left[\frac{3(\mathcal{M}^2+4\mu^2M_l^2)}{4}-3\mu^2M_0^2\right]I_1+2I_2 \tag*{(14)}

with the definitions

Iquad(M0)=∫d3k(2π)31k2+M02(15)I_{\mathrm{quad}}(M_0)=\int\frac{d^3k}{(2\pi)^3}\frac{1}{\sqrt{k^2+M_0^2}} \tag*{(15)}
Ilog(M0)=∫d3k(2π)31(k2+M02)3/2(16)I_{\mathrm{log}}(M_0)=\int\frac{d^3k}{(2\pi)^3}\frac{1}{(k^2+M_0^2)^{3/2}} \tag*{(16)}
I1=∫d3k(2π)31(k2+M02)5/2(17)I_1=\int\frac{d^3k}{(2\pi)^3}\frac{1}{(k^2+M_0^2)^{5/2}} \tag*{(17)}
I2=1532∑j=±1∫d3k(2π)3∫01dt(1−t)2(M−2jμEkl)3[(2jμEkl−M)t+k2+M02]7/2(18)I_2=\frac{15}{32}\sum_{j=\pm1}\int\frac{d^3k}{(2\pi)^3}\int_0^1dt(1-t)^2 \frac{(\mathcal{M}-2j\mu E_k^l)^3}{\left[(2j\mu E_k^l-\mathcal{M})t+k^2+M_0^2\right]^{7/2}} \tag*{(18)}

A similar procedure can be used to obtain the integrals of other quantities:

Iσl=∑j=±1∫Λd3k(2π)31EklEkl+jμ(Ekl+jμ)2+Δ2(19)I_{\sigma_l}=\sum_{j=\pm1}\int_\Lambda\frac{d^3k}{(2\pi)^3}\frac{1}{E_k^l}\frac{E_k^l+j\mu}{\sqrt{(E_k^l+j\mu)^2+\Delta^2}} \tag*{(19)}
Inl=∑j=±1∫Λd3k(2π)3j1EklEkl+jμ(Ekl+jμ)2+Δ2(20)I_{n_l}=\sum_{j=\pm1}\int_\Lambda\frac{d^3k}{(2\pi)^3}j\frac{1}{E_k^l}\frac{E_k^l+j\mu}{\sqrt{(E_k^l+j\mu)^2+\Delta^2}} \tag*{(20)}
Iσs=∫Λd3k(2π)31Eks(21)I_{\sigma_s}=\int_\Lambda\frac{d^3k}{(2\pi)^3}\frac{1}{E_k^s} \tag*{(21)}

Since the steps to obtain these integrals for MSS are described in detail in previous references [53, 70, 71], here we will just show the final results of each of these integrals:

IσlMSS=2Iquad(M0)−(Ml2−M02+Δ2)Ilog(M0)+I3+3[M24+μ2(Ml2−M02−M)]I1+2I2(22)I_{\sigma_l}^{\mathrm{MSS}}=2I_{\mathrm{quad}}(M_0)-(M_l^2-M_0^2+\Delta^2)I_{\mathrm{log}}(M_0)+I_3+3\left[\frac{\mathcal{M}^2}{4}+\mu^2(M_l^2-M_0^2-\mathcal{M})\right]I_1+2I_2 \tag*{(22)}
InlMSS=2μΔ2Ilog(M0)+3μ[M24+M(M02−Ml2)+Ml2μ2+2μ2M023]I1+2μI2−5μMl24[3M2+4μ2Ml2]I4+5μ4(4μ2(M02−2Ml2)−3M2)I5+I6(23)I_{n_l}^{\mathrm{MSS}}=2\mu\Delta^2I_{\mathrm{log}}(M_0)+3\mu\left[\frac{\mathcal{M}^2}{4}+\mathcal{M}(M_0^2-M_l^2)+M_l^2\mu^2+\frac{2\mu^2M_0^2}{3}\right]I_1+2\mu I_2-\frac{5\mu M_l^2}{4}\left[3\mathcal{M}^2+4\mu^2M_l^2\right]I_4+\frac{5\mu}{4}\left(4\mu^2(M_0^2-2M_l^2)-3\mathcal{M}^2\right)I_5+I_6 \tag*{(23)}
IσsMSS=Iquad(M0s)+M0s2−Ms22Ilog(M0s)+I7(24)I_{\sigma_s}^{\mathrm{MSS}}=I_{\mathrm{quad}}(M_{0s})+\frac{M_{0s}^2-M_s^2}{2}I_{\mathrm{log}}(M_{0s})+I_7 \tag*{(24)}

where M0sM_{0s} is the vacuum strange quark mass, obtained in the T=μ=Δ=0T=\mu=\Delta=0 limit, and the remaining definitions,

I3=1516∑j=±1∫d3k(2π)3∫0∞t2dt1+t1Ekljμ(M−2jμEkl)3[(k2+M02)t+(Ekl+jμ)2+Δ2]7/2(25)I_3=\frac{15}{16}\sum_{j=\pm1}\int\frac{d^3k}{(2\pi)^3}\int_0^\infty\frac{t^2dt}{\sqrt{1+t}}\frac{1}{E_k^l}\frac{j\mu(\mathcal{M}-2j\mu E_k^l)^3}{\left[(k^2+M_0^2)t+(E_k^l+j\mu)^2+\Delta^2\right]^{7/2}} \tag*{(25)}
I4=∫d3k(2π)31(k2+M02)7/2(26)I_4=\int\frac{d^3k}{(2\pi)^3}\frac{1}{(k^2+M_0^2)^{7/2}} \tag*{(26)}
I5=∫d3k(2π)3k2(k2+M02)7/2(27)I_5=\int\frac{d^3k}{(2\pi)^3}\frac{k^2}{(k^2+M_0^2)^{7/2}} \tag*{(27)}
I6=3532∑j=±1∫d3k(2π)3∫0∞t3dt1+tjEkl(M−2jμEkl)4[(k2+M02)t+(Ekl+jμ)2+Δ2]9/2(28)I_6=\frac{35}{32}\sum_{j=\pm1}\int\frac{d^3k}{(2\pi)^3}\int_0^\infty\frac{t^3dt}{\sqrt{1+t}}\frac{jE_k^l(\mathcal{M}-2j\mu E_k^l)^4}{\left[(k^2+M_0^2)t+(E_k^l+j\mu)^2+\Delta^2\right]^{9/2}} \tag*{(28)}
I7=34∫d3k(2π)3∫0∞tdt1+t(M0s2−Ms2)2[(k2+M0s2)t+k2+Ms2]5/2(29)I_7=\frac{3}{4}\int\frac{d^3k}{(2\pi)^3}\int_0^\infty\frac{tdt}{\sqrt{1+t}}\frac{(M_{0s}^2-M_s^2)^2}{\left[(k^2+M_{0s}^2)t+k^2+M_s^2\right]^{5/2}} \tag*{(29)}

Note that integrals I1I_1 to I7I_7 are all finite, and must be performed up to infinity in kk. This is the fundamental difference between TRS, where we cut the whole integral in the cutoff Λ\Lambda, and MSS, where all finite medium contributions are separated and performed for the whole momentum range.

Finally, the MSS expression for the normalized thermodynamic potential reads

ΩNJLMSS(σl,σs,Δ)=2σl2+σs28G+Kσsσl216G3+(G+Kσs4G)Δ2(2G+Kσs4G)2−2Nc{M~Iquad(M0)+Ms2−M0s24Iquad(M0s)−14(M~2−4μ2Δ2)Ilog(M0)−Ms2−M0s28Ilog(M0s)+∫d3k(2π)3[M~2−4μ2Δ24(Ek,0l)3−M~Ek,0l−2Ek,0l+Eks−Ek,0s−Ms2−M0s22Ek,0s+(Ms2−M0s2)28(Ek,0s)3+∑j=±(Ekl+jμ)2+Δ2]},(30)\begin{aligned} \Omega_{\mathrm{NJL}}^{\mathrm{MSS}}(\sigma_l,\sigma_s,\Delta)={}&\frac{2\sigma_l^2+\sigma_s^2}{8G}+\frac{K\sigma_s\sigma_l^2}{16G^3} +\left(G+\frac{K\sigma_s}{4G}\right)\frac{\Delta^2}{\left(2G+\frac{K\sigma_s}{4G}\right)^2}\\ &-2N_c\left\{\widetilde{M}I_{\mathrm{quad}}(M_0)+\frac{M_s^2-M_{0s}^2}{4}I_{\mathrm{quad}}(M_{0s})\right.\\ &\quad-\frac{1}{4}\left(\widetilde{M}^2-4\mu^2\Delta^2\right)I_{\mathrm{log}}(M_0)-\frac{M_s^2-M_{0s}^2}{8}I_{\mathrm{log}}(M_{0s})\\ &\quad+\int\frac{\mathrm{d}^3k}{(2\pi)^3}\left[\frac{\widetilde{M}^2-4\mu^2\Delta^2}{4(E^l_{k,0})^3}-\frac{\widetilde{M}}{E^l_{k,0}}-2E^l_{k,0}\right.\\ &\qquad\left.\left.+E^s_k-E^s_{k,0}-\frac{M_s^2-M_{0s}^2}{2E^s_{k,0}}+\frac{(M_s^2-M_{0s}^2)^2}{8(E^s_{k,0})^3} +\sum_{j=\pm}\sqrt{(E^l_k+j\mu)^2+\Delta^2}\right]\right\}, \tag*{(30)} \end{aligned}

with the definitions M~=Δ2+Ml2−M02\widetilde{M}=\Delta^2+M_l^2-M_0^2, Ek,0=k2+M02E_{k,0}=\sqrt{k^2+M_0^2} and Ek,0s=k2+M0s2E^s_{k,0}=\sqrt{k^2+M_{0s}^2}.

Results and Discussions

In this paper we have considered the SU(3) version of the NJL model at finite isospin imbalance incorporating the strange quark sector and the KMT determinant for both the zero and finite temperature cases. Thus, we have extended our previous study of the QCD equation of state at non-zero isospin density and zero temperature within the SU(2) version of the Nambu-Jona-Lasinio model. Besides, in this work we have also considered for the SU(2) model the effects of finite temperature in order to perform a complete comparison between the two versions of the NJL model.

The effects of the regularization scheme are discussed in details. We have used two alternative approaches for the regularization of the nonrenormalizable NJL model, the first one, which we have named TRS (Traditional Regularization Scheme), is the most frequently found in the literature where the ultraviolet divergences are regularized through a sharp 3D cutoff, as shown in section-II. It is important to point out that the TRS approach does not disentangle finite medium contributions from the infinity vacuum term and physically meaningful contributions are usually discarded. The second scheme, which we named MSS (Medium Separation Scheme), is capable of disentangling exactly the vacuum divergent term from the finite medium ones and only the truly divergent vacuum is regularized through a sharp 3D cutoff. It will be

discussed in what follows how dependent are the observables on the chosen regularization scheme and which one is the more appropriated for each particular situation.

The most important first principle approach to QCD in the non-perturbative regime is the lattice QCD simulation. Since for the finite isospin scenario no sign problem is found in the LQCD calculations, whenever possible, our results are compared with recent LQCD data. In order to make possible such comparisons, we have had to fit the SU(2) and the SU(3) NJL model parameters according to the pion mass and pion decay constant adopted in LQCD calculations. In Tables-I and II our fitted parameters are shown for the SU(2) and SU(3) NJL models respectively. To compare our results with lattice simulations we used Set-I for zero temperature and Set-II for finite temperature cases. The fitting procedure for the SU(3) version of the NJL model is more involved and due to this fact we have included some details of this parametrization procedure in the appendix-A.

Next, we discuss our results for the SU(2) and SU(3) NJL models at finite isospin density and zero and finite temperature using the TRS and MSS regularization schemes. At this point, we would like to emphasize the fact that the results for finite isospin and zero temperature within the SU(2) NJL model have been obtained in our previous paper[53]. However, they are shown here for a complete comparison between the NJL model versions as we have extended the zero temperature results for the SU(3) case. The finite temperature extension, however, is a completely new addition in this present work, which has been done here for both SU(2) and SU(3) cases.

Zero Temperature results

We start by showing our zero temperature SU(3) results, Figure 1, for the chiral and pion condensates, which have been evaluated respectively according to the equations,

Figure 1. (Color online) Chiral and pion condensates as functions of μI\mu_I at T=0T=0, evaluated according to Eqs. (31) and (3.2), for TRS and MSS.

Σψˉψ=mlmπ2fπ2[σl−σl02G]+1,(31)\Sigma_{\bar{\psi}\psi} = \frac{m_l}{m_\pi^2 f_\pi^2}\left[\frac{\sigma_l-\sigma_l^0}{2G}\right]+1, \tag*{(31)}
Σπ=mlmπ2fπ2Δ2G+Kσs4G,(32)\Sigma_\pi= \frac{m_l}{m_\pi^2 f_\pi^2}\frac{\Delta}{2G+K\frac{\sigma_s}{4G}}, \tag*{(32)}

as a function of the isospin chemical potential μI\mu_I for both the TRS and MSS approaches. Here it is worth to mention that the chiral condensate in Eq. (31) does not include the contribution from the strange quarks. We have used the same definitions for these quantities as LQCD [49, 52], as we have compared our results against them for the case of finite temperature2. Our results show that the difference between both approaches increases at higher μI\mu_I, where the condensates calculated in the MSS scheme are systematically lower than the corresponding ones calculated within the TRS scheme.

The results for the normalized pressure are shown in Figure 2 as a function of the isospin chemical potential. The normalized pressure pNp_N is defined as:

Figure 2. (Color online) Normalized pressure pNp_N as a function of μI\mu_I at T=0T=0, for SU(2) (solid and dot-dashed lines) and SU(3) (dashed and dotted lines) comparing TRS, MSS and lattice results from Ref. [54] (small dots).

pN=PNJL(T,μI)−PNJL(T,μI=0),(33)p_N = P_{\mathrm{NJL}}(T,\mu_I)-P_{\mathrm{NJL}}(T,\mu_I=0), \tag*{(33)}

where PNJLP_{\mathrm{NJL}} is defined in Eq. (6). It is apparent of this latter figure that compared to the LQCD results [54], the SU(3)-NJL is better in the MSS scheme (dotted lines) than in the TRS scheme (dashed lines), at least, for μI≤2mπ\mu_I \le2m_\pi. It is also apparent from Figure 2 that the SU(2)-NJL results [53] agree slightly better with LQCD data

than the SU(3) ones and the differences between TRS and MSS are less important in this case.

The results for the isospin density (see Eq. (7)) as a function of μI\mu_I at T=0T=0 are shown in Figure 3. Although the lattice data points are few, one can see that for small μI\mu_I the SU(3)-NJL model using the MSS scheme is in better agreement with LQCD results [54]. Nevertheless, when μI\mu_I increases the SU(3)-NJL model in the TRS scheme seems to be closer to the LQCD results. As compared to the SU(2)-NJL model results, the MSS scheme is closer to lattice data for μI/mπ<1.6\mu_I/m_\pi< 1.6. Thus, for both SU(2) and SU(3) versions of NJL it seems that for larger isospin chemical potential the TRS scheme is closer to lattice data. If one considers the overall trend of the lattice data, the SU(2)-NJL model seems to reproduce better the lattice data, as already noticed in our discussion of the behavior of the pressure. We mention here that it would be highly desirable to get more lattice data in order to better distinguish the differences among the versions of NJL and regularization schemes.

Isospin density as a function of isospin chemical potential

Figure 3. (Color online) Isospin density nIn_I as a function of μI\mu_I at T=0T=0, for SU(2) (solid and dot-dashed lines) and SU(3) (dashed and dotted lines) comparing TRS, MSS and lattice results from Ref. [54] (small dots).

Next up in Figure 4, we show the scaled energy density (see Eq. (7)) as a function of the scaled μI\mu_I chemical potential for the SU(3)-NJL model and T=0T=0. The energy density is scaled with its ideal or the Stefan-Boltzmann limit for finite μI\mu_I and μB=T=0\mu_B=T=0, given by

Figure 4. (Color online) Comparison of the energy density scaled by the Stefan-Boltzmann limit for zero temperature and finite isospin chemical potential. The pQCD results for higher values of μI/mπ\mu_I/m_\pi are obtained using the expressions from Ref [72].

εSB(μI)=NcNf4π2μI4.(34)\varepsilon_{\mathrm{SB}}(\mu_I)=\frac{N_cN_f}{4\pi^2}\mu_I^4. \tag*{(34)}

A comparison with the perturbative QCD calculation [72] is performed for larger values of μI3\mu_I^3. Some care is necessary when using NJL for larger μI\mu_I, since we have the Λ\Lambda-cutoff as a natural momentum scale which makes the model quantitatively trusty for μI/mπ≲3∼4\mu_I/m_\pi\lesssim3 \sim4, nevertheless, only qualitative conclusions can be done extrapolating such limit. However, it is clear from the latter figure that the MSS scheme follows the trend of pQCD for higher values of μI\mu_I. Moreover, one clearly sees in Figure 4 that the Stefan-Boltzmann limit is expected to be achieved only in the MSS scheme.

We finish our discussions on the zero temperature results showing in Figure 5 the normalized interaction measure ΔI\Delta_I as a function of the scaled isospin chemical potential. The normalized interaction measure ΔI\Delta_I is defined as:

Figure 5. (Color online) Normalized interaction measure (ΔI\Delta_I) as a function of μI\mu_I for SU(2) (solid and dot-dashed lines) and SU(3) (dashed and dotted lines) comparing TRS, MSS and lattice results from Ref. [54, 66] (small dots).

ΔI=INJL(T,μI)−INJL(T,μI=0),(35)\Delta_I=I_{\mathrm{NJL}}(T,\mu_I)-I_{\mathrm{NJL}}(T,\mu_I=0), \tag*{(35)}

where INJLI_{\mathrm{NJL}} is defined in Eq. (9). As can be seen from Figure 5, the difference between the TRS (solid and dashed lines) and MSS (dot-dashed and dotted lines) results for both SU(2) and SU(3) are small, but the MSS results appear closer to the LQCD results [54, 66].

At zero temperature, we observe the general trend that the agreement between lattice and NJL results is better for two-flavor at larger values of μI\mu_I and for three-flavor at lower values of μI\mu_I. Similar observations can also be found in recent χ\chiPT studies [19, 20]. In the next subsection we discuss the results at finite temperature and isospin chemical potential.

B Finite temperature results

At finite temperature we begin with Figure 6, where the chiral and pion condensates as a function of the temperature calculated at fixed isospin chemical potential (μI=0.206\mu_I=0.206 GeV) are shown. In the latter figure results for the SU(3)-NJL model using both the MSS and TRS schemes are compared. One clearly sees that the melting temperature is larger in the MSS scheme compared to the TRS one for both condensates. However, the pion condensate melting is a second order phase transition with the critical temperature ∼158\sim158 MeV for TRS and ∼173\sim173 MeV for MSS. On the other hand, the corresponding chiral condensate behavior signals a crossover. Below a certain temperature (around ∼165\sim165 MeV for μI=206\mu_I=206 MeV) the TRS result for the chiral condensate supersedes the MSS result, whereas after that temperature the TRS result decreases more rapidly than the MSS result.

Figure 6. (Color online) SU(3) Chiral and pion condensates as functions of the temperature TT with μI=0.206\mu_I=0.206 GeV for TRS and MSS.

Next we discuss about our findings for the thermodynamic quantities. In Figure 7 the results are shown for the normalized pressure, Eq. (33), as a function of the isospin chemical potential for three different temperatures, which have been chosen because they are available in LQCD simulations [49, 52, 64, 65]. The results have been shown for both SU(2) and SU(3)-NJL model within the TRS and MSS schemes. For larger values of μI\mu_I, the SU(3)-NJL model within the TRS scheme is closer to the LQCD results, although the agreement is better for lower temperatures. For each of the plots we have also displayed an inset, where we show the results for smaller values of μI\mu_I (0.4mπ<μI<1.6mπ0.4m_\pi< \mu_I < 1.6m_\pi) and in this case we observe that the MSS and TRS schemes are closer to each other, and for the largest temperature considered in this work the SU(3)-NJL using the MSS scheme is slightly better. Here, we notice a different behavior for finite temperature when compared to the zero temperature case. For T=0T = 0 the SU(2)-NJL results for the pNp_N are in general in better agreement with LQCD results (for TRS and MSS)

Figure 7. (Color online) Normalized pressure pNp_N as a function of μI\mu_I for different temperatures TT, for TRS and MSS, comparing SU(2) and SU(3) to lattice results from Refs. [49, 52, 64, 65].

than the SU(3) NJL model.

In Figure 8, the isospin density as a function of isospin chemical potential is plotted for the same three temperatures as discussed above. We can observe a change of slope in the isospin density for T=122T = 122 MeV and T=149T = 149 MeV which is related to the formation of pion condensate, when Δ\Delta become nonzero. This change is not present

Figure 8. (Color online) Isospin density nIn_I as a function of μI\mu_I for different temperatures TT, for TRS and MSS, comparing SU(2) and SU(3) to lattice results from Refs. [49, 52, 64, 65].

in the curves correspondent to T=179T = 179 MeV because this temperature is high enough to prevent the pion condensate to be formed. In this case we have a similar behavior as obtained for the normalized pressure, i. e., the SU(3)-NJL with the TRS scheme gives a better overall agreement with the LQCD results [49, 52, 64, 65]. For the lower temperature (T=122T = 122 MeV) considered here, the SU(2)-NJL in TRS scheme gives good results. As before, the inset plots show that the MSS and TRS are very similar for low isospin chemical potential and the SU(3)-NJL is the better model. At this point we once again stress the fact that the LQCD data for the isospin density is not conclusive enough because of its scarcity and oscillating nature.

Within the thermodynamic quantities we have also shown the variation of the normalized interaction measure ΔI\Delta I (see Eq. (35)) as a function of isospin chemical potential for three different temperatures in Figure 9. In this case though, instead of T=179T = 179 MeV, the highest temperature we choose is T=168T = 168 MeV, based on the availability of LQCD results [66]. For lower temperature (T=122T = 122 MeV) it is apparent from Figure 9 that both TRS and MSS results for SU(2) and SU(3) fall within the domain prescribed by LQCD. At T=149T = 149 MeV, for very low μI\mu_I, all the NJL results fall within the LQCD domain, however with increasing μI\mu_I, only SU(3) TRS result appears closer to LQCD result. For the higher temperature considered in Figure 9 (T=168T = 168 MeV), we can see that the SU(2)-NJL results for TRS and MSS are more in agreement with the LQCD results. It is worth to mention here that for T=168T = 168 MeV at higher values of μI\mu_I the pion condensate is zero in TRS, which is not the case of MSS. The presence of a nonzero Δ\Delta makes both pressure and energy density smaller, and the change of slope is related to the isospin density, as we discussed before (see Figure 8).

Figure 9. (Color online) Normalized trace anomaly or interaction measure (ΔI\Delta I) as a function of μI\mu_I for different temperatures TT, for TRS and MSS, comparing SU(2) and SU(3) to lattice results from Ref. [66].

We conclude our discussion for finite temperature with the T−μIT-\mu_I phase diagrams shown in Figure 10 for both SU(2) and SU(3). In each of the phase diagrams we have considered TRS and MSS results within NJL and compared them with the available LQCD results [49, 52, 64, 65]. We notice that for both SU(2) and SU(3), TRS results appear closer to LQCD for pion condensation and chiral crossover, compared to MSS. For μI=0\mu_I = 0, the critical temperature for the chiral phase transition within NJL is higher than the same within LQCD, with maximum quantitative difference of ∼16\sim16 MeV for SU(2) and ∼22\sim22 MeV for SU(3). On the other hand, investigating the pseudo triple point, beyond which both the phase transitions coincide, we find that the pseudo triple points within MSS are closer to the LQCD results compared to TRS, specially for SU(3)-NJL.

Figure 10. (Color online) T−μIT-\mu_I phase diagram within NJL model, implementing both TRS and MSS and comparing SU(2) and SU(3) to lattice results from Refs. [49, 52, 64, 65].

Acknowledgements

We thank Gergely Endrodi and Bastian B. Brandt for useful discussions and also for providing the necessary lattice datasets, both at zero and finite temperatures. This work was partially supported by Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) under Grants No. 304758/2017-5 (R.L.S.F), No. 304518/2019-0 (S.S.A) and No. 136071/2018-0 (B. S. L.); as a part of the project INCT-FNA (Instituto Nacional de Ciência e Tecnologia - Física Nuclear e Aplicações) No. 464898/2014-5 (S.S.A); U.S. DOE under Grant No. DE-FG02-00ER41132 and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) under Grant No. 2017/26111-4 (D.C.D); and Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul (FAPERGS), Grants No. 19/2551-0000690-0 and No. 19/2551-0001948-3 (R.L.S.F.). D.C.D. acknowledges the support of the Simons Foundation under the Multifarious Minds Program Grant No. 557037. A.B. acknowledges the support from Guangdong Major Project of Basic and Applied Basic Research No. 2020B0301030008 and Science and Technology Program of Guangzhou Project No. 2019050001.

NJL SU(3) Parameterization

In this appendix the procedure used for the parametrization of the NJL SU(3) model is discussed. Although we use standard techniques the complete expressions are not usually given in a complete and friendly way in the literature[73]. Moreover, having in mind to allow the reader to reproduce our calculations, the essential expressions are given here. In order to restrict the number of free parameters, we set the uu and dd current quark masses equal, i.e., mu=mdm_u=m_d. Therefore, we obtain by solving the self-consistent gap equations that the corresponding constituent uu and dd quark masses are also equal to each other: Mu=MdM_u=M_d. The free model parameters are the coupling constants GG and KK, the current ss quark mass msm_s and the cutoff parameter Λ\Lambda. The value of

the mu=mdm_u=m_d current quark mass is arbitrarily fixed. The observables that are used in the fitting procedure are the pion mass, the pion decay constant, the kaon mass and the η′\eta' meson mass.

Gap equations

The gap equations for the NJL SU(3) model are given by

Mi=mi−4Gσi+2Kσjσk(36)M_i=m_i-4G\sigma_i+2K\sigma_j\sigma_k \tag*{(36)}

with (ijk) being any cyclic permutation of (u,d,s), and the condensate is defined as

σi=⟨qˉiqi⟩=−iTr⁡[Si(p)]=−iTr⁡1p̸−Mi.\sigma_i=\langle\bar q_iq_i\rangle=-i\operatorname{Tr}[S_i(p)]=-i\operatorname{Tr}\frac{1}{\not p-M_i}.

After the explicit calculation of the trace in Dirac and color spaces one obtains:

σi=⟨qˉiqi⟩=−4MiI1i(37)\sigma_i=\langle\bar q_iq_i\rangle=-4M_iI_1^i \tag*{(37)}

with

I1i=Nc4π2∫0Λp2 dpEi=Nc8π2[ΛEiΛ−Mi2ln⁡(Λ+EiΛMi)](38)I_1^i=\frac{N_c}{4\pi^2}\int_0^\Lambda\frac{p^2\,\mathrm{d}p}{E_i}=\frac{N_c}{8\pi^2}\left[\Lambda E_i^\Lambda-M_i^2\ln\left(\frac{\Lambda+E_i^\Lambda}{M_i}\right)\right] \tag*{(38)}

where Ei=p2+Mi2E_i=\sqrt{p^2+M_i^2} and EiΛ=Λ2+Mi2E_i^\Lambda=\sqrt{\Lambda^2+M_i^2}, i=(u,d,s)i=(u,d,s).

Pion and Kaon masses and decay constants

The dispersion relations for the pion and kaon masses are given by

1−2GπΠπp(Q2)∣Q2=mπ2=0,(39)1-2G_\pi\Pi_\pi^p(Q^2)\big|_{Q^2=m_\pi^2}=0, \tag*{(39)}
1−2GKΠKp(Q2)∣Q2=mK2=0,(40)1-2G_K\Pi_K^p(Q^2)\big|_{Q^2=m_K^2}=0, \tag*{(40)}

where Ππp=Πuup+Πddp=2Πuup\Pi_{\pi}^{p}=\Pi_{uu}^{p}+\Pi_{dd}^{p}=2\Pi_{uu}^{p} and ΠKp=2Πusp\Pi_{K}^{p}=2\Pi_{us}^{p} are the pseudo-scalar polarization loops for the pion and kaon mesons respectively, which can be evaluated from the general expressions

Πijp(Q2)=2(I1i+I1j−[Q2−(Mi−Mj)2]I2ij),(41)\Pi_{ij}^{p}(Q^{2})=2\left(I_{1}^{i}+I_{1}^{j}-\left[Q^{2}-(M_{i}-M_{j})^{2}\right]I_{2}^{ij}\right), \tag*{(41)}

with I1iI_{1}^{i} already given in (38) and I2ijI_{2}^{ij} is given by

I2ij(Q2)=Nc4π2∫0Λp2 dpEiEjEi+EjQ2−(Ei+Ej)2,(42)I_{2}^{ij}(Q^{2})=\frac{N_{c}}{4\pi^{2}}\int_{0}^{\Lambda}\frac{p^{2}\,dp}{E_{i}E_{j}}\frac{E_{i}+E_{j}}{Q^{2}-(E_{i}+E_{j})^{2}}, \tag*{(42)}

whereas the modified couplings GπG_{\pi} and GKG_{K} for pions and kaons respectively are given by,

Gπ=G−12Kσs,(43)G_{\pi}=G-\frac{1}{2}K\sigma_{s}, \tag*{(43)}
GK=G−12Kσu.(44)G_{K}=G-\frac{1}{2}K\sigma_{u}. \tag*{(44)}

For the pion decay constant we have

fπ=gπqqˉQμQ2iNc∫d4p Tr⁡[γμγ5Su(p+Q2)γ5Su(p+Q2)],f_{\pi}=g_{\pi q\bar{q}}\frac{Q_{\mu}}{Q^{2}}iN_{c}\int d^{4}p\ \operatorname{Tr}\left[\gamma^{\mu}\gamma^{5}S_{u}\left(p+\frac{Q}{2}\right)\gamma^{5}S_{u}\left(p+\frac{Q}{2}\right)\right],

with after the explicit calculation of the trace in the last equation, one obtains

fπ=−4MugπqqˉI2uu(mπ2)(45)f_{\pi}=-4M_{u}g_{\pi q\bar{q}}I_{2}^{uu}(m_{\pi}^{2}) \tag*{(45)}

where the coupling strength for the meson-quark-quark interaction is given by

gπqqˉ−2(mπ2)=∂Ππp∂Q2∣Q2=mπ2=2∂Πuup∂Q2∣Q2=mπ2.(46)g_{\pi q\bar{q}}^{-2}(m_{\pi}^{2})=\left.\frac{\partial\Pi_{\pi}^{p}}{\partial Q^{2}}\right|_{Q^{2}=m_{\pi}^{2}}=2\left.\frac{\partial\Pi_{uu}^{p}}{\partial Q^{2}}\right|_{Q^{2}=m_{\pi}^{2}}. \tag*{(46)}

The last expression follows from the derivative of (41):

∂Πuup∂Q2=−2I2uu−2Q2∂∂Q2I2uu.\frac{\partial\Pi_{uu}^{p}}{\partial Q^{2}}=-2I_{2}^{uu}-2Q^{2}\frac{\partial}{\partial Q^{2}}I_{2}^{uu}.

η\eta and η′\eta^{\prime} mesons

For the case of η\eta and η′\eta^{\prime} meson, the inverse mesonic propagator assumes a matrix form[73]

D−1=12K−1−Π,(47)D^{-1}=\frac{1}{2}K^{-1}-\Pi, \tag*{(47)}

where the effective coupling matrix KK and the mesonic self energy Π\Pi for the η−η′\eta-\eta^{\prime} system are given by the matrices:

Π=(Π00Π08Π08Π88),K=(K00K08K08K88),\Pi=\begin{pmatrix}\Pi_{00}&\Pi_{08}\\\Pi_{08}&\Pi_{88}\end{pmatrix},\qquad K=\begin{pmatrix}K_{00}&K_{08}\\K_{08}&K_{88}\end{pmatrix},
K−1=1det⁡K(K88−K08−K08K00)(48)K^{-1}=\frac{1}{\det K}\begin{pmatrix}K_{88}&-K_{08}\\-K_{08}&K_{00}\end{pmatrix} \tag*{(48)}

where the determinant of KK is given by det⁡K=K00K88−K082\det K=K_{00}K_{88}-K_{08}^{2} and the specific components are given by

K00=G+13K(2σu+σs),(49)K_{00}=G+\frac{1}{3}K(2\sigma_{u}+\sigma_{s}), \tag*{(49)}
K88=G−16K(4σu−σs),(50)K_{88}=G-\frac{1}{6}K(4\sigma_{u}-\sigma_{s}), \tag*{(50)}
K08=K80=−26K(σu−σs),(51)K_{08}=K_{80}=-\frac{\sqrt{2}}{6}K(\sigma_{u}-\sigma_{s}), \tag*{(51)}
Π00=23[2Πuup(Q)+Πssp(Q)],(52)\Pi_{00}=\frac{2}{3}\left[2\Pi_{uu}^{p}(Q)+\Pi_{ss}^{p}(Q)\right], \tag*{(52)}
Π88=23[Πuup(Q)+2Πssp(Q)],(53)\Pi_{88}=\frac{2}{3}\left[\Pi_{uu}^{p}(Q)+2\Pi_{ss}^{p}(Q)\right], \tag*{(53)}
Π08=Π80=223[Πuup(Q)−Πssp(Q)].(54)\Pi_{08}=\Pi_{80}=\frac{2\sqrt{2}}{3}\left[\Pi_{uu}^{p}(Q)-\Pi_{ss}^{p}(Q)\right]. \tag*{(54)}

So, finally the inverse propagator is given by

D−1=12det⁡K(ABBC),(55)D^{-1}=\frac{1}{2\det K}\begin{pmatrix}A&B\\B&C\end{pmatrix}, \tag*{(55)}

with

A=K88−2det⁡K Π00,(56)A=K_{88}-2\det K\ \Pi_{00}, \tag*{(56)}
B=−(K08+2det⁡K Π08),(57)B=-(K_{08}+2\det K\ \Pi_{08}), \tag*{(57)}
C=K00−2det⁡K Π88,(58)C=K_{00}-2\det K\ \Pi_{88}, \tag*{(58)}

Diagonalizing D−1D^{-1} we get

D−1=12det⁡KO−1(Dη−100Dη′−1)O(59)D^{-1}=\frac{1}{2\det K}\mathcal{O}^{-1}\begin{pmatrix}D_{\eta}^{-1}&0\\0&D_{\eta^{\prime}}^{-1}\end{pmatrix}\mathcal{O} \tag*{(59)}

where the diagonalizing orthogonal matrix O\mathcal{O} is given by

O=(cos⁡θpsin⁡θp−sin⁡θpcos⁡θp),tan⁡(2θp)=2BA−C\mathcal{O}=\begin{pmatrix}\cos\theta_{p}&\sin\theta_{p}\\-\sin\theta_{p}&\cos\theta_{p}\end{pmatrix},\qquad\tan(2\theta_{p})=\frac{2B}{A-C}

and the diagonal elements now represent the dispersion relations for η\eta and η′\eta^{\prime} mesons, i.e.

Dη−1=(A+C)−(C−A)2+4B2,(60)D_{\eta}^{-1}=(A+C)-\sqrt{(C-A)^{2}+4B^{2}}, \tag*{(60)}
Dη′−1=(A+C)+(C−A)2+4B2.(61)D_{\eta^{\prime}}^{-1}=(A+C)+\sqrt{(C-A)^{2}+4B^{2}}. \tag*{(61)}

The masses of the η\eta and η′\eta^{\prime} meson can now be determined from the equations

Dη−1(Q=mη)=0,(62)D_{\eta}^{-1}(Q=m_{\eta})=0, \tag*{(62)}
Dη′−1(Q=mη′)=0.(63)D_{\eta^{\prime}}^{-1}(Q=m_{\eta^{\prime}})=0. \tag*{(63)}

At this point we want to note that mηm_{\eta} can be evaluated from Eq. (A27) by using the integrals from Eqs. (A3) and (A7). But as η′\eta^{\prime}, in general, exists above the qqˉq\bar{q} continuum, Eq. (A28) has complex poles, which we can assume to be of the form, Q=Q0=mη′−12iΓQ=Q_{0}=m_{\eta^{\prime}}-\frac{1}{2}i\Gamma, with Γ\Gamma being the width of the η′\eta^{\prime}-resonance. In the latter case the calculation of AA, BB and CC in Eq. (61) can be readily done making in Eq. (41) the replacement:

Q2I2ii→[mη′2Re⁡I2ii+mη′ΓIm⁡I2ii]+i[mη′2Im⁡I2ii−mη′ΓRe⁡I2ii],(64)Q^{2}I_{2}^{ii} \to\left[m_{\eta'}^{2}\operatorname{Re}I_{2}^{ii}+m_{\eta'}\Gamma\operatorname{Im}I_{2}^{ii}\right] + i\left[m_{\eta'}^{2}\operatorname{Im}I_{2}^{ii}-m_{\eta'}\Gamma\operatorname{Re}I_{2}^{ii}\right], \tag*{(64)}

where terms of order Γ2\Gamma^{2} have been neglected. Then, after substituting the latter expression in Eq. (41) one obtains

Πiiπ(Q2)=Re⁡Πiiπ(Q2)+iIm⁡Πiiπ(Q2),\Pi_{ii}^{\pi}(Q^{2})=\operatorname{Re}\Pi_{ii}^{\pi}(Q^{2})+i\operatorname{Im}\Pi_{ii}^{\pi}(Q^{2}),

where

Re⁡Πiiπ(Q2)=4I1i−2(mη′2Re⁡I2ii+mη′ΓIm⁡I2ii),\operatorname{Re}\Pi_{ii}^{\pi}(Q^{2})=4I_{1}^{i}-2\left(m_{\eta'}^{2}\operatorname{Re}I_{2}^{ii}+m_{\eta'}\Gamma\operatorname{Im}I_{2}^{ii}\right),
Im⁡Πiiπ(Q2)=2(mη′ΓRe⁡I2ii−mη′2Im⁡I2ii).(65)\operatorname{Im}\Pi_{ii}^{\pi}(Q^{2})=2\left(m_{\eta'}\Gamma\operatorname{Re}I_{2}^{ii}-m_{\eta'}^{2}\operatorname{Im}I_{2}^{ii}\right). \tag*{(65)}

The real and imaginary part of the integral I2iiI_{2}^{ii} can be obtained from Eq. (42) by using the Sokhotski-Plemelj formula

lim⁡ϵ→01x−iϵ=P1x+iπδ(x),(66)\lim_{\epsilon\to0}\frac{1}{x-i\epsilon}=\mathcal{P}\frac{1}{x}+i\pi\delta(x), \tag*{(66)}

where P\mathcal{P} stands for the Cauchy principal value and this formula makes sense only when integrated in xx. Then, one obtains:

Re⁡I2ii(Q)=Nc2π2P∫0Λp2 dpEi1Q2−4Ei2,\operatorname{Re}I_{2}^{ii}(Q)=\frac{N_{c}}{2\pi^{2}}\mathcal{P}\int_{0}^{\Lambda}\frac{p^{2}\,dp}{E_{i}}\frac{1}{Q^{2}-4E_{i}^{2}},
Im⁡I2ii(Q)=Nc16π1−4Mi2Q2,\operatorname{Im}I_{2}^{ii}(Q)=\frac{N_{c}}{16\pi}\sqrt{1-\frac{4M_{i}^{2}}{Q^{2}}},

where in these expressions we assume that Q=mη′Q=m_{\eta'} and mη′>2Mim_{\eta'}>2M_{i}.

References

[1] K. Fukushima and T. Hatsuda, Rept. Prog. Phys. 74, 014001 (2011) doi:10.1088/0034-4885/74/1/014001

[2] M. G. Alford, A. Schmitt, K. Rajagopal and T. Schäfer, Rev. Mod. Phys. 80, 1455 (2008) doi:10.1103/RevModPhys.80.1455

[3] F. Karsch, Lect. Notes Phys. 583, 209 (2002) doi:10.1007/3-540-45792-56

[4] S. Muroya, A. Nakamura, C. Nonaka and T. Takaishi, Prog. Theor. Phys. 110, 615 (2003) doi:10.1143/PTP.110.615

[5] P. F. Bedaque, EPJ Web Conf. 175, 01020 (2018) doi:10.1051/epjconf/201817501020

[6] J. B. Kogut and D. K. Sinclair, Phys. Rev. D 66, 034505 (2002) doi:10.1103/PhysRevD.66.034505

[7] J. B. Kogut and D. K. Sinclair, Phys. Rev. D 66, 014508 (2002) doi:10.1103/PhysRevD.66.014508

[8] D. T. Son and M. A. Stephanov, Phys. Rev. Lett. 86, 592 (2001) doi:10.1103/PhysRevLett.86.592 [hep-ph/0005225].

[9] D. T. Son and M. A. Stephanov, Phys. Atom. Nucl. 64, 834 (2001) [Yad. Fiz. 64, 899 (2001)] doi:10.1134/1.1378872

[10] L. Lepori and M. Mannarelli, Phys. Rev. D 99, no. 9, 096011 (2019) doi:10.1103/PhysRevD.99.096011

[11] S. Carignano, L. Lepori, A. Mammarella, M. Mannarelli and G. Pagliaroli, Eur. Phys. J. A 53, no. 2, 35 (2017) doi:10.1140/epja/i2017-12221-x

[12] O. Janssen, M. Kieburg, K. Splittorff, J. J. M. Verbaarschot and S. Zafeiropoulos, Phys. Rev. D 93, no. 9, 094502 (2016) doi:10.1103/PhysRevD.93.094502

[13] T. D. Cohen and S. Sen, Nucl. Phys. A 942, 39 (2015) doi:10.1016/j.nuclphysa.2015.07.018

[14] E. S. Fraga, L. F. Palhares and C. Villavicencio, Phys. Rev. D 79, 014021 (2009) doi:10.1103/PhysRevD.79.014021

[15] M. Loewe and C. Villavicencio, Phys. Rev. D 67, 074034 (2003) doi:10.1103/PhysRevD.67.074034

[16] M. Loewe and C. Villavicencio, Phys. Rev. D 71, 094001 (2005) doi:10.1103/PhysRevD.71.094001 [hep-ph/0501261].

[17] K. Splittorff, D. T. Son and M. A. Stephanov, Phys. Rev. D 64, 016003 (2001) doi:10.1103/PhysRevD.64.016003

[18] P. Adhikari, J. O. Andersen and P. Knæschke, Eur. Phys. J. C 79, 874 (2019).

[19] P. Adhikari and J. O. Andersen, JHEP 06, 170 (2020) doi:10.1007/JHEP06(2020)170

[20] P. Adhikari and J. O. Andersen, Eur. Phys. J. C 80, no.11, 1028 (2020) doi:10.1140/epjc/s10052-020-08574-8

[21] J. O. Andersen, N. Haque, M. G. Mustafa and M. Strickland, Phys. Rev. D 93, no. 5, 054045 (2016) doi:10.1103/PhysRevD.93.054045

[22] D. Ebert, T. G. Khunjua and K. G. Klimenko, Phys. Rev. D 94, no. 11, 116016 (2016) doi:10.1103/PhysRevD.94.116016

[23] T. G. Khunjua, K. G. Klimenko, R. N. Zhokhov and V. C. Zhukovsky, Phys. Rev. D 95, no. 10, 105010 (2017) doi:10.1103/PhysRevD.95.105010

[24] T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, Phys. Rev. D 98, no. 5, 054030 (2018) doi:10.1103/PhysRevD.98.054030

[25] T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, Eur. Phys. J. C 79, no. 2, 151 (2019) doi:10.1140/epjc/s10052-019-6654-2

[26] T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, JHEP 1906, 006 (2019) doi:10.1007/JHEP06(2019)006.

[27] T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, Phys. Rev. D 100, no. 3, 034009 (2019) doi:10.1103/PhysRevD.100.034009.

[28] T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, JHEP 2006, 148 (2020) doi:10.1007/JHEP06(2020)148.

[29] T. Xia, L. He and P. Zhang, Phys. Rev. D 88, no. 5, 056013 (2013) doi:10.1103/PhysRevD.88.056013

[30] C. F. Mu, L. He and Y. X. Liu, Phys. Rev. D 82, 056006 (2010). doi:10.1103/PhysRevD.82.056006

[31] H. Abuki, R. Anglani, R. Gatto, M. Pellicoro and M. Ruggieri, Phys. Rev. D 79, 034032 (2009) doi:10.1103/PhysRevD.79.034032

[32]* J. O. Andersen and L. Kyllingstad, J. Phys. G 37, 015003

References

  1. [1]K. Fukushima and T. Hatsuda, Rept. Prog. Phys. 74, 014001 (2011) doi:10.1088/0034-4885/74/1/014001DOI
  2. [2]M. G. Alford, A. Schmitt, K. Rajagopal and T. Schäfer, Rev. Mod. Phys. 80, 1455 (2008) doi:10.1103/RevModPhys.80.1455
  3. [3]F. Karsch, Lect. Notes Phys. 583, 209 (2002) doi:10.1007/3-540-45792-56
  4. [4]S. Muroya, A. Nakamura, C. Nonaka and T. Takaishi, Prog. Theor. Phys. 110, 615 (2003) doi:10.1143/PTP.110.615DOI
  5. [5]P. F. Bedaque, EPJ Web Conf. 175, 01020 (2018) doi:10.1051/epjconf/201817501020DOI
  6. [6]J. B. Kogut and D. K. Sinclair, Phys. Rev. D 66, 034505 (2002) doi:10.1103/PhysRevD.66.034505DOI
  7. [7]J. B. Kogut and D. K. Sinclair, Phys. Rev. D 66, 014508 (2002) doi:10.1103/PhysRevD.66.014508DOI
  8. [8]D. T. Son and M. A. Stephanov, Phys. Rev. Lett. 86, 592 (2001) doi:10.1103/PhysRevLett.86.592 [hep-ph/0005225].DOI
  9. [9]D. T. Son and M. A. Stephanov, Phys. Atom. Nucl. 64, 834 (2001) [Yad. Fiz. 64, 899 (2001)] doi:10.1134/1.1338782
  10. [10]D. Orlandini and M. Mannarelli, Phys. Rev. D 99, no. 9, 096011 (2019) doi:10.1103/PhysRevD.99.096011
  11. [11]S. Carignano, L. Lepori, A. Mammarella, M. Mannarelli and G. Pagliaroli, Eur. Phys. J. A 53, no. 2, 35 (2017) doi:10.1140/epja/i2017-12221-xDOI
  12. [12]O. Janssen, M. Kieburg, K. Splittorff, J. J. M. Verbaarschot and S. Zafeiropoulos, Phys. Rev. D 93, no. 9, 094502 (2016) doi:10.1103/PhysRevD.93.094502DOI
  13. [13]T. D. Cohen and S. Sen, Nucl. Phys. A 942, 39 (2015) doi:10.1016/j.nuclphysa.2015.07.018DOI
  14. [14]E. S. Fraga, L. F. Palhares and C. Villavicencio, Phys. Rev. D 79, 014021 (2009) doi:10.1103/PhysRevD.79.014021DOI
  15. [15]M. Loewe and C. Villavicencio, Phys. Rev. D 67, 074034 (2003) doi:10.1103/PhysRevD.67.074034DOI
  16. [16]M. Loewe and C. Villavicencio, Phys. Rev. D 71, 094001 (2005) doi:10.1103/PhysRevD.71.094001 [hep-ph/0501261].DOI
  17. [17]K. Splittorff, D. T. Son and M. A. Stephanov, Phys. Rev. D 64, 016003 (2001) doi:10.1103/PhysRevD.64.016003DOI
  18. [18]P. Adhikari, J. O. Andersen and P. Knæschke, Eur. Phys. J. C 79, 874 (2019).
  19. [19]P. Adhikari and J. O. Andersen, JHEP 06, 170 (2020) doi:10.1007/JHEP06(2020)170DOI
  20. [20]P. Adhikari and J. O. Andersen, Eur. Phys. J. C 80, no. 11, 1028 (2020) doi:10.1140/epjc/s10052-020-08574-8DOI
  21. [21]J. O. Andersen, N. Haque, M. G. Mustafa and M. Strickland, Phys. Rev. D 93, no. 5, 054045 (2016) doi:10.1103/PhysRevD.93.054045DOI
  22. [22]D. Ebert, T. G. Khunjua and K. G. Klimenko, Phys. Rev. D 94, no. 11, 116016 (2016) doi:10.1103/PhysRevD.94.116016DOI
  23. [23]T. G. Khunjua, K. G. Klimenko, R. N. Zhokhov and V. C. Zhukovsky, Phys. Rev. D 95, no. 10, 105010 (2017) doi:10.1103/PhysRevD.95.105010DOI
  24. [24]T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, Phys. Rev. D 98, no. 5, 054030 (2018) doi:10.1103/PhysRevD.98.054030DOI
  25. [25]T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, Eur. Phys. J. C 79, no. 2, 151 (2019) doi:10.1140/epjc/s10052-019-6654-2DOI
  26. [26]T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, JHEP 1906, 006 (2019) doi:10.1007/JHEP06(2019)006.DOI
  27. [27]T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, Phys. Rev. D 100, no. 3, 034009 (2019) doi:10.1103/PhysRevD.100.034009.DOI
  28. [28]T. G. Khunjua, K. G. Klimenko and R. N. Zhokhov, JHEP 2006, 148 (2020) doi:10.1007/JHEP06(2020)148.DOI
  29. [29]T. Xia, L. He and P. Zhang, Phys. Rev. D 88, no. 5, 056013 (2013) doi:10.1103/PhysRevD.88.056013DOI
  30. [30]C. F. Mu, L. He and Y. X. Liu, Phys. Rev. D 82, 056006 (2010). doi:10.1103/PhysRevD.82.056006DOI
  31. [31]H. Abuki, R. Anglani, R. Gatto, M. Pellicoro and M. Ruggieri, Phys. Rev. D 79, 034032 (2009) doi:10.1103/PhysRevD.79.034032DOI
  32. [32]J. O. Andersen and L. Kyllingstad, J. Phys. G 37, 015003 (2009) doi:10.1088/0954-3899/37/1/015003
  33. [33]G. f. Sun, L. He and P. Zhuang, Phys. Rev. D 75, 096004 (2007) doi:10.1103/PhysRevD.75.096004DOI
  34. [34]D. Ebert and K. G. Klimenko, Eur. Phys. J. C 46, 771 (2006) doi:10.1140/epjc/s2006-02547-5
  35. [35]D. Ebert and K. G. Klimenko, J. Phys. G 32, 599 (2006) doi:10.1088/0954-3899/32/5/001DOI
  36. [36]L. He, M. Jin and P. Zhuang, Phys. Rev. D 74, 036005 (2006) doi:10.1103/PhysRevD.74.036005DOI
  37. [37]L. He, M. Jin and P. f. Zhuang, Phys. Rev. D 71, 116001 (2005) doi:10.1103/PhysRevD.71.116001DOI
  38. [38]L. He and P. Zhuang, Phys. Lett. B 615, 93 (2005) doi:10.1016/j.physletb.2005.03.066DOI
  39. [39]A. Barducci, R. Casalbuoni, G. Pettini and L. Ravagli, Phys. Rev. D 69, 096004 (2004) doi:10.1103/PhysRevD.69.096004DOI
  40. [40]D. Toublan and J. B. Kogut, Phys. Lett. B 564, 212 (2003) doi:10.1016/S0370-2693(03)00701-9DOI
  41. [41]M. Frank, M. Buballa and M. Oertel, Phys. Lett. B 562, 221 (2003) doi:10.1016/S0370-2693(03)00607-5DOI
  42. [42]Z. Y. Lu, C. J. Xia and M. Ruggieri, arXiv:1907.11497 [hep-ph].
  43. [43]S. Mukherjee, M. G. Mustafa and R. Ray, Phys. Rev. D 75, 094015 (2007) doi:10.1103/PhysRevD.75.094015 [hep-ph/0609249].DOI
  44. [44]A. Bhattacharyya, S. K. Ghosh, A. Lahiri, S. Majumder, S. Raha and R. Ray, Phys. Rev. C 89, no. 6, 064905 (2014) doi:10.1103/PhysRevC.89.064905 [arXiv:1212.6134 [hep-ph]].DOI
  45. [45]D. Adhikari, J. O. Andersen and P. Kneschke, Phys. Rev. D 98, no. 7, 074016 (2018) doi:10.1103/PhysRevD.98.074016DOI
  46. [46]R. Stiele, E. S. Fraga and J. Schaffner-Bielich, Phys. Lett. B 729, 72 (2014) doi:10.1016/j.physletb.2013.12.053DOI
  47. [47]H. Ueda, T. Z. Nakano, A. Ohnishi, M. Ruggieri and K. Sumiyoshi, Phys. Rev. D 88, no. 7, 074006 (2013) doi:10.1103/PhysRevD.88.074006DOI
  48. [48]K. Kamikado, N. Strodtthoff, L. von Smekal and J. Wambach, Phys. Lett. B 718, 1044 (2013) doi:10.1016/j.physletb.2012.11.055DOI
  49. [49]B. B. Brandt, G. Endrödi and S. Schmalzbauer, Phys. Rev. D 97, no. 5, 054514 (2018) doi:10.1103/PhysRevD.97.054514DOI
  50. [50]B. B. Brandt, G. Endrödi and S. Schmalzbauer, EPJ Web Conf. 175, 07020 (2018) doi:10.1051/epjconf/201817507020DOI
  51. [51]B. B. Brandt and G. Endrödi, PoS LATTICE 2016, 039 (2016) doi:10.22323/1.256.0039DOI
  52. [52]B. B. Brandt, G. Endrödi and S. Schmalzbauer, PoS Confinement2018, 260 (2018) doi:10.22323/1.336.0260.DOI
  53. [53]S. S. Avancini, A. Bandyopadhyay, D. C. Duarte and R. L. Farias, Phys. Rev. D 100, no. 11, 116002 (2019) doi:10.1103/PhysRevD.100.116002
  54. [54]B. B. Brandt, G. Endrödi, E. S. Fraga, M. Hippert, J. Schaffner-Bielich and S. Schmalzbauer, Phys. Rev. D 98, no. 9, 094510 (2018) doi:10.1103/PhysRevD.98.094510DOI
  55. [55]J. A. Wheeler, Phys. Rev. 97, 511 (1955). doi:10.1103/PhysRev.97.511DOI
  56. [56]D. J. Kaup, Phys. Rev. 172, 1331 (1968). doi:10.1103/PhysRev.172.1331DOI
  57. [57]P. Jetzer, Phys. Rept. 220, 163 (1992). doi:10.1016/0370-1573(92)90123-HDOI
  58. [58]M. Colpi, S. L. Shapiro and I. Wasserman, Phys. Rev. Lett. 57, 2485 (1986). doi:10.1103/PhysRevLett.57.2485DOI
  59. [59]S. L. Liebling and C. Palenzuela, Living Rev. Rel. 15, 6 (2012) [Living Rev. Rel. 20, no. 1, 5 (2017)] doi:10.12942/lrr-2012-6, 10.1007/s41114-017-0007-yDOI
  60. [60]J. O. Andersen and P. Kneschke, arXiv:1807.08951 [hep-ph].arxiv.org/abs/1807.08951
  61. [61]H. Abuki, T. Brauner and H. J. Warringa, Eur. Phys. J. C 64, 123 (2009) doi:10.1140/epjc/s10052-009-1121-0DOI
  62. [62]D. J. Schwarz and M. Stuke, JCAP 0911, 025 (2009) Erratum: [JCAP 1010, E01 (2010)] doi:10.1088/1475-7516/2009/11/025, 10.1088/1475-7516/2010/10/E01DOI
  63. [63]M. M. Wygras, I. M. Oldengott, D. Bödeker and D. J. Schwarz, Phys. Rev. Lett. 121, no. 20, 201302 (2018) doi:10.1103/PhysRevLett.121.201302
  64. [64]B. B. Brandt and G. Endrödi, Phys. Rev. D 99, no.1, 014518 (2019) doi:10.1103/PhysRevD.99.014518DOI
  65. [65]B. B. Brandt, G. Endrödi, Private communications.
  66. [66]V. Vonchenko, B. B. Brandt, F. Cuteri, G. Endrödi, F. Hajkarim and J. Schaffner-Bielich, Phys. Rev. Lett. 126, no.1, 012701 (2021) doi:10.1103/PhysRevLett.126.012701
  67. [67]R. L. S. Farias, G. Dallabona, G. Krein and O. A. Battistel, Phys. Rev. C 73, 018201 (2006) doi:10.1103/PhysRevC.73.018201DOI
  68. [68]R. L. S. Farias, G. Dallabona, G. Krein and O. A. Battistel, Phys. Rev. C 77, 065201 (2008) doi:10.1103/PhysRevC.77.065201DOI
  69. [69]V. V. Braguta and A. Y. Kotov, Phys. Rev. D 93, no. 10, 105025 (2016) doi:10.1103/PhysRevD.93.105025DOI
  70. [70]R. L. S. Farias, D. C. Duarte, G. Krein and R. O. Ramos, Phys. Rev. D 94, no. 7, 074011 (2016) doi:10.1103/PhysRevD.94.074011DOI
  71. [71]D. C. Duarte, R. L. S. Farias and R. O. Ramos, Phys. Rev. D 99, no. 1, 016005 (2019) doi:10.1103/PhysRevD.99.016005DOI
  72. [72]T. Graf, J. Schaffner-Bielich and E. S. Fraga, Phys. Rev. D 93, no.8, 085030 (2016) doi:10.1103/PhysRevD.93.085030DOI
  73. [73]S. P. Klevansky, Rev. Mod. Phys. 64, 649 (1992). doi:10.1103/RevModPhys.64.649, T. Hatsuda and T. Kunihiro, Phys. Rept. 247, 221 (1994) doi:10.1016/0370-1573(94)90022-1, M. Buballa, Phys. Rept. 407, 205 (2005). doi:10.1016/j.physrep.2004.11.004, H. Kohyama, D. Kimura and T. Inagaki, Nucl. Phys. B 906, 524-548 (2016) doi:10.1016/j.nuclphysb.2016.03.015DOI

Paper details

vlnc:W_tjz88u8j
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents