betaFeedback

WorksPhysics and Astronomy

Sinusoidal Displacement Describes Disorder in CsPbBr3 Nanocrystal Superlattices

Abstract

Disorder is an intrinsic feature of all solids, from crystals of atoms to superlattices of colloidal nanoparticles. Unlike atomic crystals, in nanocrystal superlattices a single misplaced particle can affect the positions of neighbors over long distances, leading to cumulative disorder. This elusive form of collective particle displacement leaves clear signatures in diffraction, but little is known about how it accumulates and propagates throughout the superlattice. Here we rationalize propagation and accumulation of disorder in a series of CsPbBr3 nanocrystal superlattices by using synchrotron grazing incidence small- and wide-angle X-ray scattering. CsPbBr3 nanocrystals of colloidal softness S in the range of 0.3-0.7 were obtained by preparing particles with different sizes and ligand mixtures, consisting of oleic acid and primary amines of variable lengths. Most diffraction patterns showed clear signatures of anisotropic disorder, with multilayer diffraction characteristics of high structural coherence visible only for the {100} axial directions and lost in all other directions. As the softness decreased, the superlattices transitioned to a more ordered regime where small-angle diffraction peaks became resolution-limited, and superlattice multilayer diffraction appeared for the (110) diagonal reflections. To rationalize these anisotropies in structural coherence and their dependence on superlattice softness, we propose a sinusoidal displacement model where longitudinal and transverse displacements modulate nanocrystal positions. The model explains experimental observations and advances the understanding of disorder in mesocrystalline systems as they approach the limits of structural perfection.

20250913_Sinusoidal_Displacement_Main_Text.pdf

Figure 6.

Colloidal nanocrystals are a compelling case of complex building blocks that can spontaneously self-organize into highly ordered three-dimensional solids (nanocrystal-based superlattices), and they attract intense interest because of emergent properties and applications in optoelectronics.[1, 2, 3, 4] Nanocrystal-based superlattices exhibit disorder, owing to nanocrystal size and shape polydispersity, variations in ligand coverage, and weaker interparticle forces.[5] In diffraction experiments, this disorder manifests as peak broadening in higher order reflections. This is a signature of cumulative disorder, where displacement propagates through the structure as each particle position is influenced by that of the neighbors.[6, 7] This is the main reason why nanocrystal-based superlattices are studied by small-angle X-ray scattering, as superlattice interference is lost at wide angles.

However, colloidal perovskite nanocrystals with well-defined cubic shapes have been shown to assemble into superlattices with exceptional structural coherence, manifested by sharp and complex satellite peaks at wide angles.[8, 9, 10, 11, 12, 13, 14] These features suggest an intricate picture of disorder, in which precise superlattice periodicity and cumulative displacement can coexist. This raises the question of how positional correlations between neighboring nanocrystals propagate in different spatial directions within the superstructure, and, more generally, stimulates a discussion about the nature of disorder in nanoparticle assemblies. To address these questions, one needs to measure both small- and wide-angle X-ray scattering in multiple lattice directions on a series of high-quality superlattice samples with varying disorder. To this end, we performed experiments on perovskite nanocrystal superlattices at the ForMAX beamline of MAX IV, which allows simultaneous collection of grazing-incidence small- and wide-angle X-ray scattering (GISAXS/GIWAXS) patterns with high intensity and angular resolution. This setup provides complementary information, capturing both the average nanometric structure of superlattices (GISAXS) and the interference effects that reveal local structural coherence and disorder (GIWAXS).

Another piece of the puzzle comes from controlling the amount of disorder. Recently, some of us have reported that adopting mixed-ligand passivation enables control of disorder in CsPbBr3\mathrm{CsPbBr}_{3} superlattices.[14] The mixed ligand passivation consists of oleic acid with aliphatic amines of variable length, where shorter amines lead to enhanced structural coherence in superlattices. Here, we build on this approach to tune the colloidal softness S of nanocrystals, defined as the ratio between the ligand shell thickness and the edge length of nanocrystals (S=L/NCedgeS = L/N C_{\mathrm{edge}}).[15, 16, 17, 18] The studied softness range spans from S=0.3S=0.3 (9.5 nm particles with oleic acid and octylamine) to S=0.7S=0.7 (5.8 nm particles with oleic acid and oleylamine), and disorder increases with increasing SS, as evidenced by broadening of the GISAXS spots (Scheme 1).

Synchrotron GISAXS patterns and regimes of structural disorder in CsPbBr₃ nanocrystal superlattices

Figure 1 (PDF p. 3). (a) Synchrotron GISAXS patterns of three representative CsPbBr₃ nanocrystal superlattices as a function of ligand length and nanocrystal size, connected through colloidal softness (SS). (b) Regimes of the structural disorder of nanocrystal superlattices as a function of the average nanocrystal longitudinal displacement (σL\sigma_{\mathrm{L}}) and SS. In the illustration, the σL=0\sigma_{\mathrm{L}}=0 corresponds to the limit where nanocrystal positions are affected only by thermal-like (uncorrelated) fluctuations, and the σL→+∞\sigma_{\mathrm{L}}\to+\infty limit, a “superlattice catastrophe,” corresponds to the case of a short-range order between nanocrystals, as in glassy solids.[19] The sinusoidal displacement model (wavy orange lines) captures the different disorder regimes through the amplitude, wavelength, and direction (transversal or longitudinal) of the oscillations of nanocrystal positions.

The experiments reported below provide evidence of high structural coherence for both in- and out-of-plane GIWAXS signals along the {100}\{100\} directions of CsPbBr₃ superlattices. Except for the sample with the lowest SS value (S=0.3S=0.3), the collective X-ray interference is absent for other diffraction spots in the rest of the samples. In the S=0.3S=0.3 sample, the signatures of satellite peaks were observed for the GIWAXS (101) reflection. These observations raise the paradox of superlattices that are highly ordered along the main lattice directions, and yet appear disordered along the directions given by their linear combinations. Such observations prompted us to develop a sinusoidal displacement model consisting of longitudinal and transversal components. The longitudinal component affects the face-to-face interparticle distance along the main lattice directions, and the transversal component affects the lateral displacement of nanocrystal rows and columns. The model explains the experimental evidence of anisotropic structural coherence while preserving the intrinsically cumulative nature of disorder in nanocrystal superlattices. This sinusoidal description of disorder in nanocrystal solids can likely be extended to other materials. The results deepen insight into the structure of nanocrystal assemblies and rationalize colloidal softness as a powerful tool for superlattice engineering.

Results and Discussion

Nanocrystals with Mixed Ligands. The study was done on a series of superlattices grown from CsPbBr3\mathrm{CsPbBr}_{3} nanocrystals capped with mixed ligands consisting of oleic acid and amines of different lengths: oleylamine (C18\mathrm{C}_{18}), dodecylamine (C12\mathrm{C}_{12}), decylamine (C10\mathrm{C}_{10}) and octylamine (C8\mathrm{C}_{8}).[14] The starting nanocrystals were synthesized using a common hot-injection method, reacting cesium oleate with PbBr2\mathrm{PbBr}_{2} solubilized in a hot mixture of ligands and 1-octadecene, as summarized in the Methods. Representative high-resolution scanning transmission electron microscopy high-angle annular dark field (STEM-HAADF) images of the nanocrystals are shown in Figures 1 and Figure S1 in the Supporting Information (SI). A shortening of the interparticle distance is noticeable, as expected from the incorporation of progressively shorter amines into the ligand shell of the nanocrystals. Upon drying concentrated dispersions on silicon or similar substrates (see Methods), the nanocrystals produce three-dimensional superlattices, with representative scanning electron microscopy (SEM) images of the tilted top view (8 nm-C18\mathrm{C}_{18} nanocrystals) shown in Figure 1e and of a high-resolution region in Figure 1f. The edge lengths of the nanocrystals are approximately 8 nm for C18\mathrm{C}_{18}, C12\mathrm{C}_{12}, and C10\mathrm{C}_{10} ligands, and 9.5 nm for C8\mathrm{C}_{8} ligands, placing them in the intermediate quantum confinement regime. For comparison, a batch of quantum-confined nanocrystals with an edge length of 5.8 nm (sample 5 nm-C18\mathrm{C}_{18}) was synthesized by adapting the protocol reported by Dong et al.[20] with modifications.[21] Figure 1g shows the absorption spectra of dilute nanocrystal dispersions, illustrating the intermediate and strong confinement regimes. The colloidal softness was calculated for all samples using the nanocrystal edge length determined from TEM. The S values corresponding to the series of studied samples are 0.70 (5 nm-C18\mathrm{C}_{18}), 0.48 (C18\mathrm{C}_{18}), 0.51 (C12\mathrm{C}_{12}), 0.41 (C10\mathrm{C}_{10}), and 0.3 (C8\mathrm{C}_{8}). Similar values of softness were determined independently from the multilayer diffraction analyses (Table 1).

Sampledd [Å]L±σLL \pm\sigma_L [Å]N±σNN \pm\sigma_N [planes]S=L/(d⋅N)S = L/(d\cdot N)
(001) peak
5nm-C18\mathrm{C}_{18}36.5715 ± 2.04358.8900 ± 1.30300.70
8nm-C18\mathrm{C}_{18}37.7075 ± 1.58413.3065 ± 1.660.48
C12\mathrm{C}_{12}5.884 ± 0.02037.9615 ± 1.30612.6265 ± 1.56650.51
C10\mathrm{C}_{10}33.786 ± 1.263514.0525 ± 1.4490.41
C8\mathrm{C}_{8}32.931 ± 1.181518.7585 ± 3.25750.30
(101) peak
C10\mathrm{C}_{10}4.1059 ± 0.002526.4771 ± 1.8531≈16\approx16-
C8\mathrm{C}_{8}29.9941 ± 1.2642≈20\approx20-

Table 1. Summary of GIWAXS multilayer diffraction fits. Parameters: dd = nanocrystal lattice constant; LL = interparticle distance (surface to surface); σL\sigma_L = stacking disorder; NN = nanocrystal thickness; σN\sigma_N = nanocrystal thickness distribution. The average values are reported for brevity. For detailed fit parameters for each condition, see Table S2, Table S3.

Sampledd [Å]LL [Å]σL\sigma_L [Å]NN [planes]σN\sigma_N [planes]
(100) Out-of-plane
5 nm-C18_{18} NCs5.87936.4832.0408.8311.366
8 nm-C18_{18} NCs5.82836.3591.51012.7431.998
C12_{12}5.83536.9120.86612.7620.746
C10_{10}5.80832.9050.95813.7780.573
C8_85.80832.9011.20319.1163.501
(101) Out-of-plane
C10_{10}4.10826.4771.853≈16n/a
C8_84.10329.9941.264≈20n/a

Table S3. Multilayer diffraction fit results of Bragg patterns. Structure parameters extracted from the multilayer diffraction fits. Fits are shown in Figure S10.

High-resolution STEM-HAADF images of monolayers of 8nm-C$_{18}$ and C$_8$ nanocrystals

Figure S1. High-resolution STEM-HAADF (High-Angle Annular Dark Field) images of monolayers of (a),(b) 8nm-C18_{18} nanocrystals (well-separated from each other) and (c),(d) C8_8 nanocrystals (some necking occurs under the imaging conditions).

Nanocrystals with mixed ligands

Figure 1 (PDF p. 5). Nanocrystals with mixed ligands. (a-d) High-resolution STEM-HAADF images of CsPbBr3\mathrm{CsPbBr}_{3} nanocrystals capped with oleic acid and amines of different lengths. From left to right: (a) oleic acid - oleylamine (8nm-C18\mathrm{C}_{18}), (b) oleic acid - dodecylamine (C12\mathrm{C}_{12}), (c) oleic acid - decylamine (C10\mathrm{C}_{10}) and (d) oleic acid - octylamine (C8\mathrm{C}_{8}). (e, f) Representative SEM images displaying a top view of 8nm-C18\mathrm{C}_{18} nanocrystal superlattices acquired with the substrate tilted 45° (e) and with no tilting (f). (g) Absorption spectra of toluene dispersions of nanocrystal samples.

GISAXS Evidence of Cumulative Disorder

The GISAXS and GIWAXS experiments described here were conducted at the ForMAX beamline[22] of the MAX IV synchrotron. Experimental details and data processing are described in the Methods section. Figure 2a-Figure 2f displays the 2D GISAXS patterns and respective 1D slices of superlattice films grown from the dispersions of nanocrystals with mixed ligands shown in Figure 1. All GISAXS patterns exhibit well-defined spots, indicative of the nanoscale 3D periodicity of the superlattices. The GISAXS patterns were indexed as cubic space group Pmˉ3mP\bar{m}3m using SUNBIM4.0 software,[23] with a representative indexed pattern shown in Figure 2d. Figure 2f compares the in-plane (black curves) and out-of-plane (colored curves) 1D GISAXS profiles, from which the superlattice periodicities Λ=2π/Δq\Lambda= 2\pi/\Delta q (Δq=qn+1−qn\Delta q = q_{n+1} - q_n) were extracted (see Table S1). For 5nm-C18\mathrm{C}_{18}, 8nm-C18\mathrm{C}_{18}, C12\mathrm{C}_{12} and C10\mathrm{C}_{10} samples, identical periodicities in in-plane (x-y direction) and out-of-plane (z-direction) directions were obtained, consistent with nanocrystal sizes estimated from TEM and absorption spectra, once the ligands layer thickness is considered. For C8\mathrm{C}_{8}, a small difference between the in-plane and outof-plane periodicities (139 vs 137 Å) can be rationalized by residual strain after solvent evaporation.

GISAXS characterization of superlattices from nanocrystals capped with mixed ligands

Figure 2. GISAXS characterization of superlattices from nanocrystals capped with mixed ligands. (a-e) Experimental GISAXS patterns from a series of nanocrystal superlattice samples, plotted on a logarithmic scale. From top to bottom: (a) 5nm-C18_{18} nanocrystals, (b) 8nm-C18_{18}, (c) C12_{12}, (d) C10_{10}, and (e) C8_8. Dark blue lines correspond to detector module gaps. (f) Intensity profiles extracted from GISAXS patterns. Colored profiles are taken along out-of-plane “z” direction. Underlying black profiles are taken along the in-plane “x-y” direction. Each profile is an average of five slices starting from the origin (qxy=qz=0q_{xy} = q_z = 0). For each superlattice profile, the extracted periodicities Λ\Lambda are reported (Λ=2π/Δq\Lambda= 2\pi/\Delta q, where Δq=qn+1−qn\Delta q = q_{n+1} - q_n). The arrows highlight the increasing vs. constant peak width Δqz\Delta q_z with diffraction order. (g) Radial broadening for in-plane (001) and out-of-plane (100) directions. (h) Out-of-plane GISAXS peak broadening as a function of the peak order. The literature example of an amphiphile thin film with a lamellar phase is reported with “×” and extracted from the reference.[28]

SampleOut-of-planeIn-planeCrystal SystemSpace group
C18_{18} 5 nm82.8 ± 0.8CubicPm-3m
C18_{18} 8 nm109.1 ± 1.3CubicPm-3m
C12_{12}108.6 ± 1.2CubicPm-3m
C10_{10}109.9 ± 1.2CubicPm-3m
C8_8136.8 ± 0.3139.1 ± 0.3CubicPm-3m

Table S1. Superlattice periodicities from the GISAXS profiles (Figure 2f in the main text).

The radial and azimuthal broadening of the first-order peaks (Figure 2g, see also Figure S2, Figure S3 and Figure S4) vary with the superlattice softness. Here, radial broadening carries information about nanoscale inhomogeneities in the superlattice periodicities and cumulative disorder, while azimuthal broadening indicates orientational disorder either at the level of whole superlattices or of multi-particle domains. Both radial and azimuthal broadening decrease from C18_{18} to C8_{8}, as nanocrystals get bigger and ligands get shorter, indicating that a reduction in the nanocrystal softness increases the overall order of superlattices.

Image not extracted

Figure S2. (a) 001 GISAXS peak, (b) azimuthal broadening profile and Gaussian fitting, (c) radial broadening profile and Gaussian fitting. From top to bottom: 5nm-C18_{18}, 8nm-C18_{18}, C12_{12}, C10_{10}, and C8_8 nanocrystal superlattice samples.

Image not extracted

Figure S3. (a) 100 GISAXS peak, (b) azimuthal broadening profile and Gaussian fitting, (c) radial broadening profile and Gaussian fitting. From top to bottom: 5nm-C18_{18}, 8nm-C18_{18}, C12_{12}, C10_{10}, and C8_{8} nanocrystal superlattice samples.

Image not extracted

Figure S4. GISAXS azimuthal broadening for in-plane (001)(001) and out-of-plane (100)(100) directions.

The GISAXS 2D patterns for all samples showed multiple spots, allowing us to compare how peak broadening changes with diffraction orders across different samples and use it as a qualitative distinction between cumulative and thermal-like nanocrystal displacements.[24, 25, 26] We observed that the peak width increases with the diffraction order for all samples except C8_{8} (as highlighted by arrows in Figure 2f and plotted in Figure 2h). In this case, the resolution-limited width in GISAXS resembles crystalline multilayer systems (e.g., polyacene, amphiphilic crystals, and 2D Ruddlesden-Popper metal halides, see Figure S5 for comparison).[27, 28, 29]

Image not extracted

Figure S5. Comparison of the photoluminescence (PL) and absorption spectrum of C12C_{12} and C18C_{18} nanocrystals dispersed in toluene. The wider PL spectrum and less pronounced excitonic absorption peaks indicate a larger size dispersion for C12C_{12} nanocrystals than for 8nm-C18C_{18} nanocrystals.

GIWAXS Evidence of Disorder Anisotropy. The as-synthesized CsPbBr3\mathrm{CsPbBr}_{3} nanocrystals employed here as building blocks were established to have an orthorhombic structure (PbnmPbnm, ICSD No. 98009-7851),[8] and GIWAXS patterns were indexed using a pseudocubic notation for simplicity, as clarified previously (Figure 3a shows a pattern with indexed spots relevant for the analysis).[8, 9] All GIWAXS patterns (Figure 3a-Figure 3e) exhibit diffraction spots due to the fully-oriented nanocrystals inside the superlattice, with the (100) and (001) spots showing characteristic satellites due to the structural coherence.[8, 9, 10, 11, 12, 13] To quantify cumulative disorder in multiple directions of the superlattice, we applied the multilayer diffraction routine developed for wide-angle θ:2θ\theta:2\theta X-ray diffraction to GIWAXS data. The main results are summarized in Table 1 and demonstrate shortening of the interparticle separation and increasing order with decreasing SS. In addition to diffraction spots, the C8\mathrm{C}_{8} sample pattern shows arcs coming from residual non-assembled nanocrystals, which were subtracted for analysis (Figure S7, Figure S8 in the SI).

GIWAXS characterization of superlattices from nanocrystals capped with mixed ligands

Figure 3. GIWAXS characterization of superlattices from nanocrystals capped with mixed ligands. (a-e) Experimental GIWAXS patterns from superlattice films of nanocrystals capped with mixed ligands. From top to bottom: (a) 5nm-C18_{18}, (b) 8nm-C18_{18}, (c) C12_{12}, (d) C10_{10}, and (e) C8_8. (f) Intensity profiles extracted from GIWAXS patterns. Colored traces represent the out-of-plane (001) and (101) peak profiles, with the underlying black profile represents the in-plane (100) one. (g, h) Inter-nanocrystal distance (LL) and average nanocrystal displacement (σL\sigma_L), respectively. For C8_8 sample (S=0.3), grey points indicate fit values from the raw data before correction for the background of randomly oriented nanocrystals, and the orange points indicate fit values after correction. The cartoon inset in (h) depicts the isotropic order of nanocrystals along the three orthogonal directions.

Image not extracted

Figure S7. Concentration-dependent C8_{8} superlattice order.

Image not extracted

Figure S8. GISAXS C8_8 fitting of the disordered component.

Figure 3f displays normalized diffraction intensity profiles for the axial (100)/(001) and the diagonal (101) peaks extracted from GIWAXS patterns. The multilayer diffraction fit parameters are summarized in Table S2, while the fits are shown in Figure S6. The interparticle spacing (LL) and average nanocrystal displacement (σL\sigma_L) decrease with the shortening of the amine ligand (Figure 3g, Figure 3h, respectively), consistent with GISAXS results discussed above and prior characterization using a laboratory diffractometer.[14] A significant finding is that, for each sample, σL\sigma_L is comparable for (001) peak in-plane and out-of-plane dimensions within error, indicating that the nanocrystal displacement parameters follow the cubic symmetry of the superlattice CsPbBr3_3 (Figure 3h). Slight differences in the atomic lattice constant and ligand interdigitation in the out-of-plane direction could be a further explanation of the difference in the two periodicities observed for C8_8 superlattices in GISAXS.

Sampledd [Å]LL [Å]σL\sigma_L [Å]NN [planes]σN\sigma_N [planes]S=L/(d⋅N)S = L/(d\cdot N)
(100) Out-of-plane
5nm-C185\mathrm{nm}\text{-}\mathrm{C}_{18}5.88636.4932.0418.8791.2390.70
8nm-C188\mathrm{nm}\text{-}\mathrm{C}_{18}5.86637.8141.56713.5311.5610.48
C12\mathrm{C}_{12}5.85237.6611.28212.2492.1290.53
C10\mathrm{C}_{10}5.86633.5671.28113.9382.0120.41
C8\mathrm{C}_{8}5.86032.6771.20319.1163.5010.29
∗C8^{*}\mathrm{C}_{8}5.85832.6771.32519.2122.8720.29
(100) In-plane
5nm-C185\mathrm{nm}\text{-}\mathrm{C}_{18}5.90636.6502.0468.9011.3670.70
8nm-C188\mathrm{nm}\text{-}\mathrm{C}_{18}5.91037.6011.60113.0821.7590.49
C12\mathrm{C}_{12}5.89838.2621.33013.0041.0040.50
C10\mathrm{C}_{10}5.89134.0051.24614.1670.8860.41
C8\mathrm{C}_{8}5.90533.1851.16018.4013.0140.31
∗C8^{*}\mathrm{C}_{8}5.90933.1261.3118.3433.5040.31

Table S2. Table S2. Multilayer diffraction fit results of GIWAXS patterns. Structure parameters extracted from the multilayer diffraction fits. The fits are shown in Figure S6. To account for the disordered contribution present in the C8\mathrm{C}_8 GIWAXS pattern (Figure 3e), we subtracted a Gaussian background from the peak profile; the fitting results before and after subtraction are reported in ∗C8^{*}\mathrm{C}_8 and C8\mathrm{C}_8 rows, respectively. Parameters: dd = nanocrystal lattice constant; LL = interparticle distance (surface to surface); σL\sigma_L = stacking disorder; NN = nanocrystal thickness; σN\sigma_N = nanocrystal thickness distribution, SS – colloidal softness [calculated as L/(d⋅N)L/(d\cdot N)].

Image not extracted

Figure S6. Multilayer diffraction fits of GIWAXS patterns. a-f) Out-of-plane (100) (left) and in-plane (100) (right) diffraction profiles extracted from the 2D GIWAXS patterns reported in Figure 3. They correspond to (a) 5nm-C18_{18}, (b) 8nm-C18_{18}, (c) C12_{12}, (d) C10_{10} and (e) C8_{8}, and (f) *C8_{8}.

Diagonal Structural Coherence and the Need for a Different Model. The initial observations of structural coherence in perovskite superlattices were satellites of the (100) and (200) Bragg reflections of the pseudo-cubic perovskite structure, which align to the main lattice directions of the assembly.[8, 9] Although (101) diffraction spots are visible in GIWAXS patterns (Figure 3f), they completely lacked such intensity modulation satellites for the C18C_{18}, C12C_{12}, and C10C_{10} samples. This result contrasts with the 1D description of cumulative disorder implicit in the multilayer diffraction model, because collective interference should monotonically fade at higher qq-values, q(002)>q(101)q(002) > q(101). Indeed, multilayer diffraction simulations performed for the (101) peak using the same σL\sigma_L value extracted for the (001) peak in Figure 3h indicate that collective interference modulations should be observed (see Figure S9). In contrast with this trend, the C8C_8 sample showed a clear X-ray scattering intensity modulation of the (101) peak. Notably, in this case, the σL≈1.26\sigma_L \approx1.26 Å value extracted from the (101) fit was compatible σL\sigma_L value observed for the main axial directions. For comparison, the C10C_{10} has lower σL\sigma_L in the axial direction (i.e., better structural coherence), but displays no interference modulation whatsoever for the (101) peak (σL>2\sigma_L > 2 Å, estimated limit of detection).

Image not extracted

Figure S9. (a) 2D GIWAXS pattern of C10_{10} superlattice and (b) comparison between the 001 and 101 profiles extracted from (a) and the calculated diffraction patterns of C10_{10} superlattice with σL≈1.28\sigma_L \approx1.28 and 1.8 Å.

We hypothesized that the absence of such features for the (101) planes arises from their sensitivity to combinations of multiple displacement directions as opposed to (100) planes. This difference comes from geometric considerations: the (100) planes lie parallel to the nanocube facets, and their alignment with neighboring nanocrystals is determined by translation along a single Cartesian axis. In contrast, (101) planes are inclined at 45∘45^\circ to the nanocube facets, so their alignment is coupled to two translational degrees of freedom. As a result, a displacement along one Cartesian axis disrupts only one of the three (100) families of planes but affects two of the three (101) families. Therefore, X-ray interference from (101) planes of nanocubes is more easily suppressed by a slight positional displacement of nanocrystals in the superlattice. Although C8C_8, C10C_{10}, and C12C_{12} are all well-ordered superlattice samples from the (100) plane perspective, because of the clear presence of satellite peaks, high structural coherence in the {101}\{101\} direction was detected only in C8C_8. This can be rationalized by a loss in degrees of freedom (Figure 4c) with the increased rigidity of the nanocrystal packing as a consequence of low softness (S=0.3 for C8C_8, and 0.4 and 0.5 for C10C_{10} and C12C_{12}, respectively). This interpretation ties with the higher peak sharpness observed in GISAXS for C8C_8 superlattices compared to all other investigated samples, which also suggests that such assemblies are less prone to rotation and shear-like movement than softer superlattices, and therefore C8_8 is the most ordered superlattice either at the supra-crystal scale (GISAXS) and at the sub-crystal scale (GIWAXS).

Experimental GIWAXS peak profiles and illustration of structural coherence

Figure 4. Experimental GIWAXS (101) peak profiles (circles, ca. qcenter=1.53q_{\mathrm{center}} = 1.53 Å−1^{-1}) and fits (continuous green lines) for (a) C10_{10} and (b) C8_8 nanocrystal superlattice samples. The fit parameters are summarized in Table 1. (c) Illustration of the alignment (structural coherence) between (001) and (101) families of planes. In the case of more-ordered C8_8 nanocrystals, the alignment is maintained for the (001) and (101) families of planes as highlighted by the glowing outlines. In the case of less-ordered C10_{10} nanocrystals, the alignment is preserved for (001) but lost for the (101) family of planes.

A Sinusoidal Displacement Model

The experimental findings suggest that nanocrystals with the lowest colloidal softness produce superlattices where structural coherence is better preserved in all directions of the lattice. That is consistent with prior observations of improved order in superlattices of large PbS nanocrystals[30] and colloidal CsPbBr3_3 nanoplatelets with short octylamine ligands.[10] The observation of multilayer interference modulating the (101) reflections in GIWAXS data was inconsistent with a simplified model of cumulative disorder where random displacements were added to the interparticle spacing at each nanocrystal site and were sufficient to reproduce multilayer interference from the family of (100) planes.[13, 31] In other words, if the first and second order (h00) Bragg reflection were modulated, then the (101) reflection should be modulated too, contradicting experimental observations.

To rationalize this discrepancy, a displacement model is needed that satisfies several key requirements. It must decouple the average face-to-face interparticle distance variability (captured in the multilayer diffraction model by the parameter σL\sigma_L) from a shear-like lateral displacement. At the same time, the model should enforce correlation of various shifts across all the spatial directions, preserve cumulative behavior, and prevent the nanocrystal position from diverging away from the superlattice origin. To meet these criteria, we introduced a periodic displacement (uu) model, in which the nanocrystal coordinates are shifted by longitudinal (ulu_l) and transversal (utu_t) sinusoidal displacements from the ideal positions (uidealu_{\mathrm{ideal}}):

u=uideal+ul+ut(1)u = u_{\mathrm{ideal}} + u_l + u_t \tag*{(1)}

Where:

uideal=Λ(i+j+k)(2)u_{\mathrm{ideal}} = \Lambda(i + j + k) \tag*{(2)}
ul=Al[sin⁡(2πΛiλl+ϕ)+sin⁡(2πΛjλl+ϕ)+sin⁡(2πΛkλl+ϕ)](3)u_l = A_l \left[\sin\left(\frac{2\pi\Lambda i}{\lambda_l} + \phi\right) + \sin\left(\frac{2\pi\Lambda j}{\lambda_l} + \phi\right) + \sin\left(\frac{2\pi\Lambda k}{\lambda_l} + \phi\right)\right] \tag*{(3)}
ut=At[sin⁡(2πΛkλt+ϕ)cos⁡(2πΛjλt+ϕ)+sin⁡(2πΛiλt+ϕ)cos⁡(2πΛkλt+ϕ)+sin⁡(2πΛjλt+ϕ)cos⁡(2πΛkλt+ϕ)](4)u_t = A_t \left[\sin\left(\frac{2\pi\Lambda k}{\lambda_t} + \phi\right)\cos\left(\frac{2\pi\Lambda j}{\lambda_t} + \phi\right) + \sin\left(\frac{2\pi\Lambda i}{\lambda_t} + \phi\right)\cos\left(\frac{2\pi\Lambda k}{\lambda_t} + \phi\right) + \sin\left(\frac{2\pi\Lambda j}{\lambda_t} + \phi\right)\cos\left(\frac{2\pi\Lambda k}{\lambda_t} + \phi\right)\right] \tag*{(4)}

In the equations above, Λ\Lambda is the superlattice periodicity and i,j,ki,j,k are the coordinates of the nn-th nanocrystal, Al,tA_{l,t} and λl,t\lambda_{l,t} are the amplitudes and wavelengths of the displacement, respectively, ϕ\phi is a random phase shift. Longitudinal displacement alters the interparticle spacing along the edges and diagonals of the superlattice unit cell, leading to a similar broadening of collective interference features for both (001)/(002) axial and (101) diagonal peaks. Conversely, the transversal displacement affects the displacement of nanocrystals in the plane perpendicular to the wave propagation vector, that is, parallel to the facet of neighboring nanocrystals. Figure 5c-Figure 5e shows the wide-angle X-ray diffraction patterns calculated using the previously-developed models[9, 10, 13] with modifications for periodic displacements of nanocrystal coordinates as described in eqs. 1-4, and either increasing λt\lambda_t from 400 nm to 600 nm or decreasing AtA_t from 3 nm to 5 nm. Both scenarios result in decreased disorder and lead to the multilayer diffraction of the (101) reflection, while the other peaks remain unchanged. The same result wouldn’t have been achieved by tuning the parameters of the longitudinal displacement mode only (for example, by increasing λl\lambda_l from 200 nm to 300 nm or decreasing AlA_l from 0.3 nm to 0.2 nm, see Figure S11), which mostly affects the broadening of the (001) and (002) peaks. The main source of loss of structural coherence for the (101) reflection is the shear-like transversal oscillation, which shifts the nanocrystal perpendicular to the propagation of the displacement wave.

Periodic displacement in a nanocube superlattice

Figure 5. Periodic displacement in a nanocube superlattice. (a) Cartoon depicting the effect of the primary and secondary displacements on the packing of nanocrystals (eq. (1)). (b) High-resolution SEM image of a superlattice fragment showing wavy nanocrystal packing with an overlay illustrating its amplitude (AtA_t) and wavelength (λt\lambda_t). (c-e) Calculated wide-angle X-ray diffraction patterns of CsPbBr3_3 nanocrystal superlattices showing effect of changing λt\lambda_t and AtA_t onto multilayer interference of (101) peak.

Image not extracted

Figure S11. Simulated wide-angle X-ray diffraction patterns of CsPbBr3_3 nanocrystal superlattices showing the effect of changing λl\lambda_l (longitudinal wavelength), AlA_l (longitudinal amplitude), λt\lambda_t (transversal wavelength) and AtA_t (transversal amplitude). The longitudinal parameter has little effect on the (101) peak, while it affects the broadening of the (001) and (002) peaks. As discussed in the main text, the broadening of the (101) peak is primarily influenced by the transversal parameters.

We hypothesized that AtA_t is minimized in the C8_8 sample (S=0.3) because large nanocrystals and short interparticle spacing restrict nanocrystal movement, dampening the amplitude of the periodic displacement. In contrast, softer nanocrystals (e.g., S=0.4−0.7 for C10_{10}, C12_{12}, C18_{18}, and 5-C18_{18} samples) exhibit more flexibility and thus erased {101}\{101\} multilayer interference. Another interpretation is to view ul\mathbf{u}_l and ut\mathbf{u}_t as frozen waves that statically displace nanocrystals from their equilibrium positions. In this analogy, ul\mathbf{u}_l and ut\mathbf{u}_t resemble static acoustic phonon modes, with displacements parallel and perpendicular to the propagation direction, respectively. Thus, reduced nanocrystal softness corresponds to a longer spatial period of oscillation, analogous to the decrease in frequency of a harmonic oscillator with increasing reduced mass.[32]

Wave-like displacements caused by various mechanisms can also be observed in other crystalline systems, such as martensitic phases,[33] liquid crystals,[34, 35] and metal alloys.[36, 37] In liquid crystals, for example, twisted nematic or smectic structures, wave-like or helical, emerge due to molecular anisotropy, elasticity, or chirality, resulting in a periodic alignment of molecules.[38] The wave-like nanocrystal packing in superlattices has been observed in SEM and TEM images in this work (see Figure 5b) as well as across the literature.[30, 32, 39, 40, 41, 42, 43, 44] It is therefore plausible that, similarly to other ordered systems, ligand-ligand interactions and structural inhomogeneities in nanocrystal assemblies could give rise to periodic displacements.

Conclusions

This study demonstrates that perovskite CsPbBr3\mathrm{CsPbBr}_{3} nanocrystals capped with mixed ligands can self-assemble into superlattices exhibiting high structural coherence in both in-plane and out-of-plane directions. Through combining GISAXS and GIWAXS synchrotron measurements, we showed that the structural order in these superlattices systematically depends on colloidal softness, a tunable parameter defined by the ratio between ligand shell thickness and nanocrystal edge length. A counterintuitive observation of a broadening at wide angles (consistent with cumulative disorder) but resolution-limited peak broadening at small angles (suggesting an apparent thermal-like, uncorrelated disorder) in the nanocrystals with S=0.3S=0.3 prompted a deeper explanation. To rationalize these observations, we deconstructed nanocrystal displacements into longitudinal and transversal components, introducing sinusoidal modulation of nanocrystal coordinates that reconciles observed diffraction patterns and bridges regimes of thermal-like (where A→0A \to0 and λ→∞\lambda\to\infty) and powder-like uncorrelated disorder (where A→∞A \to\infty and λ→0\lambda\to0). The model also offers a physical analogy to static acoustic phonon modes, linking decreased nanocrystal softness to reduced displacement amplitude and longer spatial modulation periods. Such a wave-like deformation closely resembles the periodic structural modulations found in liquid crystals,[33, 34, 35, 45] reinforcing the analogy between nanocrystal superlattices and soft condensed matter systems. The periodic nanocrystal displacements invite compelling analogies with phonon modes and atomic vibrations. As their exploration as quantum materials continues across nanoscience, this highlights the potential of nanocrystal superlattices as model systems for investigating excitonic and vibrational interactions[46, 47, 48] and excitation transport.[4, 49, 50, 51]

Methods

Nanocrystal synthesis and characterization. Samples of 8–10 nm CsPbBr3\mathrm{CsPbBr}_{3} nanocrystals passivated with mixed ligands (8nm-C18\mathrm{C}_{18}, C12\mathrm{C}_{12}, C10\mathrm{C}_{10}, and C8\mathrm{C}_{8} series) were synthesized by hot-injection following a previously reported procedure with minor variations.[14] Briefly, the syntheses consisted of injecting 0.5 ml of 0.073 M cesium oleate solution in 1-octadecene into the hot lead bromide (ca. 0.036 M PbBr2\mathrm{PbBr}_{2}) solubilized in a mixture of alkylamine, oleic acid, and 1-octadecene. The temperature of the mixture was different for different amines (160 °C for 8nm-C18\mathrm{C}_{18}, and 170 °C for C8\mathrm{C}_{8}, C10\mathrm{C}_{10}, and C12\mathrm{C}_{12} amines). The as-synthesized nanocrystals were isolated either by centrifugation alone (C18\mathrm{C}_{18} and C12\mathrm{C}_{12}) or with the aid of anti-solvent ethyl acetate (C10\mathrm{C}_{10} and C8\mathrm{C}_{8}). After isolation, the precipitate was re-dispersed in 300 μL\mu\mathrm{L} toluene, forming a concentrated dispersion, centrifuged to remove undissolved material, and the obtained supernatant was used for subsequent characterization and superlattice growth. The quantum-confined nanocrystals of CsPbBr3\mathrm{CsPbBr}_{3} (5nm-C18\mathrm{C}_{18}) were synthesized using the hot-injection synthesis of Dong et al.,[20] with the detailed procedure reported by Gomes Ferreira et al.[21] UV-Vis optical absorption spectra were recorded on dilute dispersions of nanocrystals in toluene using Cary 500 (C8\mathrm{C}_{8}, C10\mathrm{C}_{10}, C12\mathrm{C}_{12}, and 8nm-C18\mathrm{C}_{18} samples) and Perkin Elmer Lambda 1050 (5nm-C18\mathrm{C}_{18} sample) spectrometers. High-resolution scanning transmission electron microscopy (HRSTEM) images were acquired on a probe-corrected Thermo Fisher Spectra 30-300 STEM operated at 300 kV. Images were acquired on a High-Angle annular Dark Field (HAADF) detector with a current of 50 pA. SEM imaging was performed on a superlattice film grown on top of a silicon substrate, using a field-emission SEM JEOL JSM-7500 FA operating at an acceleration voltage of 25 kV.

Synchrotron experiments and data analysis. A thin film of nanocrystal superlattices for synchrotron experiments was prepared by drop-casting nanocrystal dispersions in toluene on silicon nitride substrates (1000 nm-thick SiN, Silson, product code M1000143, SiRN-5.0-200-2.5-1000) and leaving them to dry slowly, enclosed in a Petri dish. The nanocrystal concentration in the drop-cast dispersion was approximately 0.5 μM\mu\mathrm{M}, to allow the growth of isolated superlattices. The concentrated nanocrystal dispersions obtained as described above, are stable over the course of 7-10 days needed for shipping and handling at the synchrotron, and do not show visible signs of degradation during handling under ambient conditions. GISAXS and GIWAXS experiments were performed using the ForMAX beamline at the MAX IV Laboratory.[22] For GISAXS, ForMAX employs an Eiger2 4M detector in an 8-meter vacuum vessel, while GIWAXS uses a custom windmill-shaped detector with a central aperture for GISAXS transmission. In the GISAXS/GIWAXS experiments, incident angles of 1.400∘1.400^\circ and 4.237∘4.237^\circ were used with a 14.31 keV beam, providing approximately 5.5×10145.5 \times10^{14} photons/s total flux. The 4.237∘4.237^\circ incidence angle was employed to collect the 2D map from which the 101 peak profiles were extracted and reported in Figure 4 for C10C_{10} and C8C_{8} superlattices and in Figure S10 for all other superlattices. The beam size was 50×5050 \times50 μm2\mu\mathrm{m}^{2} at normal incidence, which corresponds to the elongated footprint of the beam on the sample with a length of ca. 2 mm for 1.400∘1.400^\circ incident angle and ca. 680 μm\mu\mathrm{m} for 4.237∘4.237^\circ incident angle. The sample-to-detector distances were 2990 mm for GISAXS and 142 mm for GIWAXS. Data calibration for GISAXS and GIWAXS was performed by employing silver behenate and LaB6_6 powders as standards, respectively. The patterns were indexed using SUNBIM4.0 software.[23] The 1D profiles were extracted from the 2D maps by averaging 5 pixel lines in correspondence with the desired spots.

Image not extracted

Figure S10. Multilayer diffraction fits of Bragg patterns. a-d) On the right are (100) out-of-plane peak profiles and on the left are (101) peak profiles extracted from the 2D GIWAXS patterns.

Acknowledgements

We thank Simone Lauciello (Electron Microscopy Facility at IIT) for help with HRSEM analysis of superlattices and Kim Nygård (ForMAX beamline, MAX IV) for assistance with experiments and discussions. We acknowledge the MAX IV Laboratory for beamtime on the ForMAX beamline under proposal 20230363. Research conducted at MAX IV, a Swedish national user facility, is supported by Vetenskapsrådet (Swedish Research Council, VR) under contract 2018-07152, Vinnova (Swedish Governmental Agency for Innovation Systems) under contract 2018-04969 and Formas under contract 2019-02496. S. T. acknowledges the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie Funding Program (Project SUPER-QD, Grant Agreement No. 101148934). The work of H.C. and J.W. received support from the Swedish Research Council (contract no. 2021-04273), the Olle Engkvist Foundation and the Essence project. This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant 801847). The work of L.T., M.G.F., and D.B. was funded by the European Union (ERC Starting Grant PROMETHEUS, project no. 101039683). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. D.B. acknowledges partial support from the grant NSFPHY-2309135 to the Kavli Institute for Theoretical Physics for participation in the KITP Program on Nanoparticle Assemblies: A New Form of Matter with Classical Structure and Quantum Function, that stimulated work on the MAX IV beamtime proposal.

Supporting Information Available

Electron microscopy characterization, summaries of multilayer diffraction fits, GISAXS and GIWAXS analyses, calculated diffraction patterns.

CRediT Statement

Umberto Filippi: Conceptualization (equal), Data curation (lead), Formal analysis (lead), Investigation (equal), Methodology (equal), Software (equal), Validation (lead), Visualization (supporting), Writing – Original Draft Preparation (equal), Writing – review and editing (equal).

Stefano Toso: Conceptualization (equal), Data curation (equal), Formal analysis (equal), Investigation (equal), Methodology (equal), Software (lead), Validation (equal), Visualization (lead), Writing – Original Draft Preparation (equal), Writing – review and editing (equal).

Matheus G. Ferreira: Data Curation (supporting), Investigation (supporting), Resources (supporting);

Lorenzo Tallarini: Data Curation (supporting), Investigation (supporting);

Yurii P. Ivanov: Data curation (lead), Formal analysis (equal), Investigation (equal), Visualization (equal), Writing – review and editing (supporting);

Francesco Scattarella: Data curation (supporting), Formal analysis (supporting), Investigation (supporting), Visualization (supporting);

Vahid Haghighat: Investigation (supporting), Writing – review and editing (supporting);

Huaiyu Chen: Investigation (supporting), Software (supporting), Writing – review and editing (supporting); Megan O. Hill Landberg: Investigation (supporting), Software (supporting),

Giorgio Divitini: Funding acquisition (supporting), Project administration (supporting), Resources (supporting), Supervision (supporting), Writing – review and editing (supporting);

Cinzia Giannini: Investigation (supporting), Resources (supporting), Supervision (supporting), Writing – review and editing (supporting).

Jesper Wallentin: Data Curation (supporting), Formal analysis (supporting), Resources (supporting), Software (Supporting), Writing – review and editing (supporting).

Liberato Manna: Investigation (supporting), Resources (supporting), Supervision (supporting), Writing – review and editing (supporting).

Dmitry Baranov: Conceptualization (equal), Data curation (supporting), Formal analysis (supporting), Funding acquisition (lead), Investigation (equal), Methodology (equal), Project administration (lead), Resources (lead), Software (supporting), Supervision (lead), Validation (equal), Visualization (supporting), Writing – Original Draft Preparation (equal), Writing – review and editing (equal).

Supporting Information for Sinusoidal Displacement Describes Disorder in CsPbBr3_3 Nanocrystal Superlattices

Umberto Filippi; Stefano Toso; Matheus G. Ferreira; Lorenzo Tallarini; Yuriy P. Ivanov; Francesco Scattarella; Vahid Haghighat; Huaiyu Chen; Megan O. Hill Landberg; Giorgio Divitini; Jesper Wallentin; Cinzia Giannini; Liberato Manna; Dmitry Baranov

20250913_Sinusoidal_Displacement_Supporting_Information

References

  1. [1]Bassani, C. L.; van Anders, G.; Banin, U.; Baranov, D.; Chen, Q.; Dijkstra, M.; Dimitriyev, M. S.; Efrati, E.; Faraüdo, J.; Gang, O.; Gaston, N.; Golestanian, R.; Guerrero-Garcia, G. I.; Gruenwald, M.; Haji-Akbari, A.; Ibáñez, M.; Karg, M.; Kraus, T.; Lee, B.; Van Lenh, R. C., et al., Nanocrystal Assemblies: Current Advances and Open Problems. ACS Nano 2024, 18, 14791–14840.DOI
  2. [2]Pinheiro, A. V.; Han, D.; Shih, W. M.; Yan, H., Challenges and opportunities for structural DNA nanotechnology. Nat. Nanotechnology 2011, 6, 763–772.DOI
  3. [3]Sugi, K. S.; Maier, A.; Scheele, M., Emergent properties in supercrystals of atomically precise nanoclusters and colloidal nanocrystals. Chem. Commun. 2022, 58, 6998–7017.DOI
  4. [4]Blach, D. D.; Lumsargis-Roth, V. A.; Chuang, C.; Clark, D. E.; Deng, S.; Williams, O. F.; Li, C. W.; Cao, J.; Huang, L., Environment-assisted quantum transport of excitons in perovskite nanocrystal superlattices. Nat. Commun. 2025, 16, 1270.DOI
  5. [5]Guinier, A., X-ray diffraction: in crystals, imperfect crystals, and amorphous bodies. Courier Corporation: 2013.
  6. [6]Hosemann, R.; Vogel, W.; Weick, D.; Balta-Calleja, F. J., Novel aspects of the real paracrystal. Acta Crystallogr. Sect. A 1981, 37, 85–91.DOI
  7. [7]Rivnay, J.; Mannsfeld, S. C. B.; Miller, C. E.; Salleo, A.; Toney, M. F., Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale. Chem. Rev. 2012, 112, 5488–5519.DOI
  8. [8]Toso, S.; Baranov, D.; Giannini, C.; Marras, S.; Manna, L., Wide-Angle X-Ray Diffraction Evidence of Structural Coherence in CsPbBr₃ Nanocrystal Superlattices. ACS Mater. Lett. 2019, 1, 272–276.DOI
  9. [9]Toso, S.; Baranov, D.; Altamura, D.; Scattarella, F.; Dahl, J.; Wang, X. Z.; Marras, S.; Alivisatos, A. P.; Singer, A.; Giannini, C.; Manna, L., Multilayer Diffraction Reveals That Colloidal Superlattices Approach the Structural Perfection of Single Crystals. ACS Nano 2021, 15, 6243–6256.DOI
  10. [10]Toso, S.; Baranov, D.; Giannini, C.; Manna, L., Structure and Surface Passivation of Ultrathin Cesium Lead Halide Nanoplatelets Revealed by Multilayer Diffraction. ACS Nano 2021, 15, 20341–20352.DOI
  11. [11]Bertolotti, F.; Vivani, A.; Ferri, F.; Anzini, P.; Cervellino, A.; Bodnarchuk, M. I.; Nedelcu, G.; Bernasconi, C.; Kovalenko, M. V.; Masciocchi, N.; Guagliardi, A., Size Segregation and Atomic Structural Coherence in Spontaneous Assemblies of Colloidal Cesium Lead Halide Nanocrystals. Chem. Mater. 2022, 34, 594–608.DOI
  12. [12]Cervellino, A.; Frison, R., Diffraction from Nanocrystal Superlattices. Nanomaterials 2022, 12, 1781.arxiv.org/abs/2204.12782
  13. [13]Toso, S.; Baranov, D.; Filippi, U.; Giannini, C.; Manna, L., Collective Diffraction Effects in Perovskite Nanocrystal Superlattices. Acc. Chem. Res. 2023, 56, 66–76.DOI
  14. [14]Filippi, U.; Toso, S.; Zaffalon, M. L.; Pianetti, A.; Li, Z.; Marras, S.; Goldoni, L.; Meinardi, F.; Brovelli, S.; Baranov, D.; Manna, L., Cooling-Induced Order-Disorder Phase Transition in CsPbBr₃ Nanocrystal Superlattices. Adv. Mater. 2025, 27, e2410949.DOI
  15. [15]Boles, M. A.; Talapin, D. V., Many-Body Effects in Nanocrystal Superlattices: Departure from Sphere Packing Explains Stability of Binary Phases. J. Am. Chem. Soc. 2015, 137, 4494–4502.DOI
  16. [16]Jishkariani, D.; Elbert, K. C.; Wu, Y.; Lee, J. D.; Hermes, M.; Wang, D.; van Blaaderen, A.; Murray, C. B., Nanocrystal Core Size and Shape Substitutional Doping and Underlying Crystalline Order in Nanocrystal Superlattices. ACS Nano 2019, 13, 5712–5719.DOI
  17. [17]Levy, S.; Be’er, O.; Veber, N.; Monachon, C.; Bekenstein, Y., Tuning the Colloidal Softness of CsPbBr₃ Nanocrystals for Homogeneous Superlattices. Nano Lett. 2023, 23, 7129–7134.DOI
  18. [18]Hallstrom, J.; Cherniukh, I.; Zha, X.; Kovalenko, M. V.; Travesset, A., Ligand Effects in Assembly of Cubic and Spherical Nanocrystals: Applications to Packing of Perovskite Nanocubes. ACS Nano 2023, 17, 7219–7228.DOI
  19. [19]Urban, J. J.; Talapin, D. V.; Shevchenko, E. V.; Murray, C. B., Self-assembly of PbTe quantum dots into nanocrystal superlattices and glassy films. J. Am. Chem. Soc. 2006, 128, 3248–3255.pubmed.ncbi.nlm.nih.gov/16522106
  20. [20]Dong, Y.; Qiao, T.; Kim, D.; Parobek, D.; Rossi, D.; Son, D. H., Precise Control of Quantum Confinement in Cesium Lead Halide Perovskite Quantum Dots via Thermodynamic Equilibrium. Nano Lett. 2018, 18, 3716–3722.DOI
  21. [21]Gomes Ferreira, M.; Gastin, B.; Hiller, J.; Zaluzhnyy, I. A.; Hinsley, G. N.; Wang, B.; Ngoi, K. H.; Vartanyants, I. A.; Schreiber, F.; Scheele, M.; Baranov, D., Self-Assembly of Quantum-Confined CsPbBr₃ Perovskite Nanocrystals into Rhombic, Frame, and Rectangular Superlattices. Small Struct. 2025, 2500133.DOI
  22. [22]Nygard, K.; McDonald, S. A.; Gonzalez, J. B.; Haghighat, V.; Appel, C.; Larsson, E.; Ghanbari, R.; Viljanen, M.; Silva, J.; Malki, S.; Li, Y.; Silva, V.; Weninger, C.; Engelmann, F.; Jeppsson, T.; Felcsuti, G.; Rosen, T.; Gordeyeva, K.; Soderberg, L. D.; Dierks, H., et al., ForMAX - a beamline for multiscale and multimodal structural characterization of hierarchical materials. J. Synchrotron Radiat. 2024, 31, 363–377.DOI
  23. [23]Scattarella, F.; Altamura, D.; Sibillano, T.; De Caro, L.; Siliqi, D.; Giannini, C., SUNBIM 4.0 software: new developments in small- and wide-angle X-ray scattering data analysis for scanning mode and grazing-incidence geometry. J. Appl. Crystallogr. 2025, 58.DOI
  24. [24]Eads, J. L.; Millane, R. P., Diffraction by the ideal paracrystal. Acta Crystallogr. Sect. A 2001, 57, 507–517.pubmed.ncbi.nlm.nih.gov/11526299
  25. [25]Renaud, G.; Lazzari, R.; Leroy, F., Probing surface and interface morphology with Grazing Incidence Small Angle X-Ray Scattering. Surf. Sci. Rep. 2009, 64, 255–380.DOI
  26. [26]Vegso, K.; Siffalovic, P.; Jergel, M.; Majkova, E.; Kocsis, T.; Benkovicova, M.; Luby, S.; Capek, I.; Perlich, J.; Roth, S. V., Application of the paracrystal model to GISAXS analysis of the 3D self-assembled nanoparticle crystals. Phys. Status Solidi B 2014, 251, 1169–1177.DOI
  27. [27]Chen, H.; Lin, J.; Kang, J.; Kong, Q.; Lu, D.; Kang, J.; Lai, M.; Quan, L. N.; Lin, Z.; Jin, J.; Wang, L.-w.; Toney, M. F.; Yang, P., Structural and spectral dynamics of single-crystalline Ruddlesden-Popper phase halide perovskite blue light-emitting diodes. Sci. Adv. 2020, 6, eaay4045.DOI
  28. [28]Grafskaia, K. N.; Akhkiamova, A. F.; Vashurkin, D. V.; Kotlyarskyi, D. S.; Pontoni, D.; Anokhin, D. V.; Zhu, X.; Ivanov, D. A., Bicontinuous Gyroid Phase of a Water-Swollen Wedge-Shaped Amphiphile: Studies with In-Situ Grazing-Incidence X-ray Scattering and Atomic Force Microscopy. Materials 2021, 14.
  29. [29]Sleigh, J. P.; McMahon, D. P.; Troisi, A., Effect of the intermolecular thermal motions on the tail of the electronic density of states in polyacene crystals. Appl. Phys. A 2009, 95, 147–152.DOI
  30. [30]Weidman, M. C.; Yager, K. G.; Tisdale, W. A., Interparticle Spacing and Structural Ordering in Superlattice PbS Nanocrystal Solids Undergoing Ligand Exchange. Chem. Mater. 2015, 27, 474–482.DOI
  31. [31]Fullerton, E. E.; Schuller, I. K.; Vanderstraeten, H.; Bruynseraede, Y., Structural refinement of superlattices from x-ray diffraction. Phys. Rev. B 1992, 45, 9292–9310.
  32. [32]Lee, J.; Lu, Z.; Wu, Z.; Ophus, C.; Schenter, G. K.; De Yoreo, J. J.; Chun, J.; Li, D., Defect Self-Elimination in Nanocube Superlattices Through the Interplay of Brownian, van der Waals, and Ligand-Based Forces and Torques. ACS Nano 2024, 18, 32386–32400.DOI
  33. [33]Kaufmann, S.; Niemann, R.; Thersleff, T.; Rößler, U. K.; Heczko, O.; Buschbeck, J.; Holzapfel, B.; Schultz, L.; Fähler, S., Modulated martensite: why it forms and why it deforms easily. New J Phys 2011, 13, 053029.DOI
  34. [34]Bagiński, M.; Tupikowska, M.; González-Rubio, G.; Wójcik, M.; Lewandowski, W., Shaping Liquid Crystals with Gold Nanoparticles: Helical Assemblies with Tunable and Hierarchical Structures Via Thin-Film Cooperative Interactions. Adv. Mater. 2020, 32, 1904581.DOI
  35. [35]Kang, S.; Biesold, G. M.; Lee, H.; Bukharina, D.; Lin, Z.; Tsukruk, V. V., Dynamic Chiro-Optics of Bio-Inorganic Nanomaterials via Seamless Co-Assembly of Semiconducting Nanorods and Polysaccharide Nanocrystals. Adv. Funct. Mater. 2021, 31, 2104596.DOI
  36. [36]Gruner, M. E.; Fähler, S.; Entel, P., Magnetoelastic coupling and the formation of adaptive martensite in magnetic shape memory alloys. Phys. Status Solidi B 2014, 251, 2067–2079.DOI
  37. [37]Lu, J. B.; Yang, H. X.; Tian, H. F.; Zeng, L. J.; Ma, C.; Feng, L.; Wu, G. H.; Li, J. Q.; Jansen, J., Cooperative effect of monoclinic distortion and sinusoidal modulation in the martensitic structure of Ni₂FeGa. J. Solid State Chem. 2010, 183, 425–430.
  38. [38]Dietrich, C. F.; Collings, P. J.; Sottmann, T.; Rudquist, P.; Giesselmann, F., Extremely small twist elastic constants in lyotropic nematic liquid crystals. Proc. Natl. Acad. Sci. USA 2020, 117, 27238–27244.DOI
  39. [39]Baranov, D.; Toso, S.; Imran, M.; Manna, L., Investigation into the Photoluminescence Red Shift in Cesium Lead Bromide Nanocrystal Superlattices. J. Phys. Chem. Lett. 2019, 10, 655–660.DOI
  40. [40]Li, X.; Xue, Z.; Chen, X.; Qiao, X.; Mo, G.; Bu, W.; Guan, B.; Wang, T., Printable assemblies of perovskite nanocubes on meter-scale panel. Sci. Adv. 2022, 8, eadd1559.DOI
  41. [41]Zhang, Y.; Thomas, C. J.; Guillaussier, A.; Smilgies, D.-M.; Korgel, B. A., Thermal Phase Transitions in Superlattice Assemblies of Cuboidal CH₃NH₃PbI₃ Nanocrystals Followed by Grazing Incidence X-Ray Scattering. J. Phys. Chem. C 2019, 123, 17555–17565.DOI
  42. [42]van der Burgt, J. S.; Geuchies, J. J.; van der Meer, B.; Vanrompay, H.; Zanaga, D.; Zhang, Y.; Albrecht, W.; Petukhov, A. V.; Filion, L.; Bals, S.; Swart, I.; Vanmaekelbergh, D., Cuboidal Supraparticles Self-Assembled from Cubic CsPbBr₃ Perovskite Nanocrystals. J. Phys. Chem. C 2018, 122, 15706–15712.
  43. [43]Clark, D. E.; Lumsargis, V. A.; Blach, D. D.; Zhu, K.; Shumski, A. J.; Yao, L.; Chen, Q.; Huang, L.; Li, C. W., Quantifying Structural Heterogeneity in Individual CsPbBr₃ Quantum Dot Superlattices. Chem. Mater. 2022, 34, 10200–10207.DOI
  44. [44]Hiller, J. L.; Thalwitzer, R.; Bozkurt, A.; Ferreira, M. G.; Hodak, R.; Strauss, F.; Nadler, E.; Hinsley, G. N.; Wang, B.; Ngoi, K. H.; Rudzinski, W.; Kneschaurek, E.; Roseker, W.; Sprung, M.; Lapkin, D.; Baranov, D.; Schreiber, F.; Vartanyants, I. A.; Scheele, M.; Zaluzhnyy, I. A., Mechanically Robust Supercrystals from Antisolvent-Induced Assembly of Perovskite Nanocrystals. ACS Nano 2025, 19, 26117–26126.
  45. [45]Lu, J.; Xue, Y.; Bernardino, K.; Zhang, N.-N.; Gomes, W. R.; Ramesar, N. S.; Liu, S.; Hu, Z.; Sun, T.; de Moura, A. F.; Kotov, N. A.; Liu, K., Enhanced optical asymmetry in supramolecular chiroplasmonic assemblies with long-range order. Science 2021, 371, 1368–1374.DOI
  46. [46]Diroll, B. T.; Kamysbayev, V.; Coropceanu, I.; Talapin, D. V.; Schaller, R. D., Heat-driven acoustic phonons in lamellar nanoplatelet assemblies. Nanoscale 2020, 12, 9661–9668.DOI
  47. [47]Jansen, M.; Tisdale, W. A.; Wood, V., Nanocrystal phononics. Nat. Mater. 2023, 22, 161–169.DOI
  48. [48]Poyser, C. L.; Czerm iuk, T.; Akimov, A.; Diroll, B. T.; Gaulding, E. A.; Salasyuk, A. S.; Kent, A. J.; Yakovlev, D. R.; Bayer, M.; Murray, C. B., Coherent Acoustic Phonons in Colloidal Semiconductor Nanocrystal Superlattices. ACS Nano 2016, 10, 1163–1169.DOI
  49. [49]Yettapu, G. R.; Talukdar, D.; Sarkar, S.; Swarnkar, A.; Nag, A.; Ghosh, P.; Mandal, P., Terahertz Conductivity within Colloidal CsPbBr₃ Perovskite Nanocrystals: Remarkably High Carrier Mobilities and Large Diffusion Lengths. Nano Lett. 2016, 16, 4838–4848.DOI
  50. [50]Shcherbakov-Wu, W.; Saris, S.; Sheehan, T. J.; Wong, N. N.; Powers, E. R.; Krieg, F.; Kovalenko, M. V.; Willard, A. P.; Tisdale, W. A., Persistent enhancement of exciton diffusivity in CsPbBr₃ nanocrystal solids. Sci. Adv. 2024, 10, eadj2630.
  51. [51]Sheehan, T. J.; Saris, S.; Tisdale, W. A., Exciton Transport in Perovskite Materials. Adv. Mater. 2024, 2415757.DOI

Paper details

vlnc:W_tk8a88wd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents