betaFeedback

WorksPhysics and Astronomy

Static and dynamical Casimir effects in a wedge within the worldline formulation

Abstract

We study a real massless scalar field in d+1d+1 dimensions confined to a wedge of opening angle αα, in the presence of a semitransparent circular arc that may oscillate radially. Within the worldline formulation, and for an arbitrary strength λλ of the δδ-potential that models the arc, we expand the effective action in powers of the radial displacement RR of the arc. In this formulation, all the information about the media is contained in the propagator of a non-relativistic point particle, so that known results for that propagator can be used directly. At zeroth order we obtain the Casimir energy of the wedge, with Dirichlet, Neumann or mixed walls, and the contribution of the arc in closed form for arbitrary λλ. We show that the worldline integrand is, point by point, the energy density obtained from the energy-momentum tensor of the scalar field with curvature coupling ξ=1/4ξ=1/4; with this identification, and using dimensional regularization for the integrated quantities, we recover the known results for the wedge and for the wedge closed by a Dirichlet arc. At second order in RR, we reduce the form factor that determines the imaginary part of the in-out effective action, and hence the probability of pair creation by the moving arc, to a one-loop expression involving the radial Green's functions of each angular sector. In the narrow-wedge limit, each angular sector behaves as a field with a mass set by the angular quantization, coupled to a moving δδ-mirror; for a Dirichlet arc, the pair creation spectrum of the exterior region approaches that of a planar massive mirror, while the interior region behaves as a tapered cavity. Finally, by decomposing the electromagnetic field into TE and TM scalars, we obtain the Casimir energy of wedges with perfectly conducting, perfectly permeable and mixed walls.

Introduction

The Casimir effect has by now been studied in a wide variety of situations, and a number of exactly solvable geometries are known. Among them, the wedge occupies a prominent place: it is simple enough to admit closed-form results, and at the same time it is a building block of more complicated boundaries (polygonal cavities, cylindrical sectors, edges and tips of all kinds). In this paper we revisit the wedge, and the wedge closed by a semitransparent circular arc, from the point of view of the worldline formulation, both for static and for time-dependent configurations.

At the local level, the vacuum expectation value of the energy-momentum tensor inside a perfectly reflecting wedge was obtained by Dowker and Kennedy for a scalar field [1], and by Deutsch and Candelas for the conformally coupled scalar and for the electromagnetic field [2]. The electromagnetic case was reconsidered in Ref. [3], and local zeta-function evaluations were presented in Refs. [4, 5, 6]. The energy density of a scalar field with arbitrary curvature coupling ξ\xi, inside a wedge closed by a Dirichlet circular arc, was obtained in Ref. [7], and the exterior region was considered in Ref. [8]. These local quantities are not unique: the energy-momentum tensor admits an improvement term proportional to ξ\xi, and different choices of ξ\xi lead to different energy densities and, as we shall see, to different radial energy distributions.

At the global level, the Casimir energy of a semicircular cylinder was found to be divergent [9], a divergence that was traced back to the edges [10]. An unremovable divergence associated with the corners where the arc meets the walls was also found for the electromagnetic wedge closed by a cylindrical arc [11, 12], which was extended to nonzero temperature in Ref. [13]; a wedge with semitransparent walls, closed by a Dirichlet arc, was studied in Ref. [14]. The energies of the full cylinder, for Dirichlet and Neumann scalar fields and for the electromagnetic field, are known [15]. The relation between the total energy and the torque on the walls has been the subject of a discussion on a possible torque anomaly [16, 17], which was examined in annular sectors in Refs. [18, 19]; the special role of the coupling ξ=14\xi= \frac{1}{4}, for which the energy density contains no product of gradients, was emphasized in Ref. [20].

The worldline formulation [21, 22] represents the effective action in terms of the propagator of a non-relativistic particle moving in the background defined by the media. It has been used extensively in numerical evaluations of Casimir energies [21] and, more recently, to study the dynamical Casimir effect for planar media of arbitrary strength [23]. The latter complements functional approaches to the dissipative effects of moving perfect and imperfect mirrors [24, 25, 26, 27, 28]. In this context, the wedge closed by an arc is a natural next step beyond the plane: the angular sector is exactly solvable at the level of propagators, and the arc, modeled by a δ\delta-potential of arbitrary strength λ\lambda, can undergo radial oscillations.

Our aims in this work are the following. First, we show that the whole static problem, namely, the energies of wedges with Dirichlet, Neumann or mixed walls, with and without the semitransparent arc, follows from the same worldline propagators, with the arc contribution obtained in closed form for arbitrary λ\lambda (Sect. 4); for perfectly reflecting arcs, the only divergence left is a logarithmic one, associated with the corners and independent of α\alpha. Second, we show that the worldline integrand is, point by point in the interior of the wedge, the local energy density of a scalar field with curvature coupling ξ=14\xi= \frac{1}{4}; this identification turns the known arbitrary-ξ\xi results of Refs. [2, 7] into exact evaluations of the worldline integrand (Sect. 4.5). Third, we obtain the first- and second-order terms in the expansion of the effective action in the radial displacement of the arc, and reduce the second-order form factor to a one-loop expression involving the radial Green’s functions of each angular sector, whose imaginary part gives the probability of pair creation in terms of the radial modes (Sect. 5). Fourth, we study the limit of a very narrow wedge, in which each angular sector becomes a massive field with a moving δ\delta-mirror, the mass being set by the angular quantization, and the lowest sector dominates the pair creation in a frequency window (Sect. 6). We also extend the static results to the electromagnetic field, for perfect electric or magnetic conductor walls, and obtain the energy of a perfectly reflecting arc with Neumann conditions (Sects. 4.6 and 7).

The paper is organized as follows. In Sect. 2 we define the model; Sect. 3 reviews the worldline representation of the effective action and its perturbative expansion in the radial displacement of the arc; Sect. 4 contains the zeroth-order (static) results, including the arc at arbitrary λ\lambda, the ξ=14\xi=\frac{1}{4} identification, and the Neumann arc; Sect. 5 deals with the first- and second-order terms; Sect. 6 with the narrow-wedge limit; Sect. 7 contains the electromagnetic extensions; and Sect. 8 presents our conclusions.

The model

We consider a real scalar field φ(x)\varphi(x) in D=d+1D=d+1 dimensions, coupled to static and dynamical media, in such a way that its Euclidean action S(φ,V)\mathcal{S}(\varphi,V) may be written, after an integration by parts, as follows:

S(φ,V)=12∫ddx φ(x)(−∂2+V)φ(x).(1)\mathcal{S}(\varphi,V)=\frac{1}{2}\int\mathrm{d}^{d}x\,\varphi(x)\left(-\partial^{2}+V\right)\varphi(x). \tag*{(1)}

We use the notation x≡(x0,x1,…,xd−2,x⊥)x\equiv(x_{0},x_{1},\ldots,x_{d-2},x_{\perp}), where x0x_{0} is the imaginary time, x1,…,xd−2x_{1},\ldots,x_{d-2} are the coordinates along the edge of the wedge (the axial coordinates), and x⊥≡(xd−1,xd)=(ρcos⁡θ,ρsin⁡θ)x_{\perp}\equiv(x_{d-1},x_{d})=(\rho\cos\theta,\rho\sin\theta) are the coordinates in the plane orthogonal to the edge, written in polar form. Natural units are used (ℏ≡1\hbar\equiv1, c≡1c\equiv1), and the metric reduces to the (d+1)×(d+1)(d+1)\times(d+1) identity matrix, so no distinction is implied by placing an index upstairs or downstairs.

The potential is the sum of two terms,

V(x)=Vw(θ)+Vλ(x).(2)V(x)=V_{w}(\theta)+V_{\lambda}(x). \tag*{(2)}

The first one confines the field to the angular sector 0<θ<α0<\theta<\alpha,

Vw(θ)={0,0<θ<α+∞,otherwise(3)V_{w}(\theta)= \begin{cases} 0, & 0<\theta<\alpha\\ +\infty, & \text{otherwise} \end{cases} \tag*{(3)}

while the second one describes a semitransparent circular arc, whose radius may oscillate around a mean value aa:

Vλ(x)=v(ρ−a−R(x0)),v(u)=λδ(u),λ≥0,(4)V_{\lambda}(x)=v\left(\rho-a-R(x_{0})\right),\qquad v(u)=\lambda\delta(u),\qquad\lambda\geq0, \tag*{(4)}

where R(x0)R(x_{0}), the Euclidean version of the radial displacement R(t)R(t) of the arc, is treated as a small perturbation. Our aim is to calculate the effective action in powers of RR, for an arbitrary value of λ\lambda. Throughout, it will be convenient to use

n≡πα,(5)n\equiv\frac{\pi}{\alpha}, \tag*{(5)}

which is not restricted to integer values: nn is an arbitrary real number, with n≥12n\geq\frac{1}{2} (that is, α≤2π\alpha\leq2\pi); n=1n=1 corresponds to a single plane and n=12n=\frac{1}{2} to a half-plane.

The boundary conditions on the walls θ=0\theta=0 and θ=α\theta=\alpha define the domain of the self-adjoint operator −∂2+V-\partial^{2}+V appearing in (1). Since the worldline representation follows from writing the effective action in terms of Tr⁡e−T(−∂2+V)\operatorname{Tr}e^{-T(-\partial^{2}+V)}, the same operator, with the same domain, plays the role of the Hamiltonian of the point-like particle; therefore, its propagator obeys the same boundary conditions as the field. Dirichlet conditions may be obtained as the strong-coupling limit of a potential [21], as in (3), while Neumann (or mixed) conditions, which correspond to paths reflected at the walls, are implemented directly through the corresponding propagators. Accordingly, we regard (3) as a shorthand for the restriction of the field to the sector 0<θ<α0 < \theta< \alpha, the boundary conditions on each wall (Dirichlet or Neumann) being specified separately.

Effective action

The one-loop effective action Γ(V)\Gamma(V) is defined in terms of the vacuum-to-vacuum Euclidean transition amplitude, Z\mathcal{Z}, via

e−Γ(V)≡Z(V)Z(0),Z(V)≡∫Dϕ e−S(ϕ,V),(6)e^{-\Gamma(V)} \equiv\frac{\mathcal{Z}(V)}{\mathcal{Z}(0)}, \qquad\mathcal{Z}(V) \equiv\int\mathcal{D}\phi\,e^{-S(\phi,V)}, \tag*{(6)}

where the Z(0)\mathcal{Z}(0) factor subtracts the zero-point contribution of free space. In the worldline approach [21, 22],

Γ(V)=−12(4π)d+12∫0+∞dTTd+32∫dd+1x[⟨e−∫0TdτV(x(τ))⟩x−1],(7)\Gamma(V) = -\frac{1}{2(4\pi)^{\frac{d+1}{2}}}\int_{0^+}^{\infty}\frac{\mathrm{d}T}{T^{\frac{d+3}{2}}}\int\mathrm{d}^{d+1}x\left[\left\langle e^{-\int_{0}^{T}\mathrm{d}\tau V(x(\tau))}\right\rangle_x-1\right], \tag*{(7)}

where ⟨…⟩x\langle\ldots\rangle_x denotes a functional average over closed loops xμ(τ)x_\mu(\tau) with xμ(0)=xμ(T)≡xx_\mu(0)=x_\mu(T)\equiv x:

⟨…⟩x≡∫x(0)=xx(T)=xDx … e−14∫0Tdτx˙μ(τ)x˙μ(τ)∫x(0)=xx(T)=xDx e−14∫0Tdτx˙μ(τ)x˙μ(τ).(8)\langle\ldots\rangle_x \equiv\frac{\int_{x(0)=x}^{x(T)=x}\mathcal{D}x\,\ldots\,e^{-\frac{1}{4}\int_{0}^{T}\mathrm{d}\tau\dot{x}_\mu(\tau)\dot{x}_\mu(\tau)}}{\int_{x(0)=x}^{x(T)=x}\mathcal{D}x\,e^{-\frac{1}{4}\int_{0}^{T}\mathrm{d}\tau\dot{x}_\mu(\tau)\dot{x}_\mu(\tau)}}. \tag*{(8)}

Since VV depends on x0x_0 and x⊥x_\perp, but not on the axial coordinates, the latter cancel between numerator and denominator, and the effective action is proportional to their (d−2)(d-2)-dimensional volume Ld−2L^{d-2}. We therefore define Γ^≡Γ/Ld−2\widehat{\Gamma}\equiv\Gamma/L^{d-2}:

Γ^(V)=−12(4π)d+12∫0+∞dTTd+32∫dx0∫d2x⊥[⟨e−∫0TdτV(x0(τ),x⊥(τ))⟩(x0,x⊥)−1],(9)\widehat{\Gamma}(V)=-\frac{1}{2(4\pi)^{\frac{d+1}{2}}}\int_{0^+}^{\infty}\frac{\mathrm{d}T}{T^{\frac{d+3}{2}}}\int\mathrm{d}x_0\int\mathrm{d}^{2}x_\perp\left[\left\langle e^{-\int_{0}^{T}\mathrm{d}\tau V(x_0(\tau),x_\perp(\tau))}\right\rangle_{(x_0,x_\perp)}-1\right], \tag*{(9)}

where ∫d2x⊥=∫dθ∫0∞dρ ρ\int\mathrm{d}^{2}x_\perp=\int\mathrm{d}\theta\int_{0}^{\infty}\mathrm{d}\rho\,\rho and ⟨…⟩(x0,x⊥)\langle\ldots\rangle_{(x_0,x_\perp)} is the average over closed loops in the three coordinates (x0,x⊥)(x_0,x_\perp). We denote by ⟨…⟩x0\langle\ldots\rangle_{x_0} and ⟨…⟩x⊥\langle\ldots\rangle_{x_\perp} the averages over closed loops in x0x_0 and in x⊥x_\perp, respectively, each normalized by the corresponding free path integral, and write ρ(τ)≡∣x⊥(τ)∣\rho(\tau)\equiv|x_\perp(\tau)|.

Perturbative expansion

Expanding the potential in powers of RR,

V(x)=V0(x⊥)+∑k=1∞(−1)kk!V0(k)(ρ−a)(R(x0))k,(10)V(x)=V_0(x_\perp)+\sum_{k=1}^{\infty}\frac{(-1)^k}{k!}V_0^{(k)}(\rho-a)\bigl(R(x_0)\bigr)^k, \tag*{(10)}

with V0(x⊥)≡Vw(θ)+v(ρ−a)V_0(x_\perp) \equiv V_w(\theta) + v(\rho-a), we have, up to second order,

References

  1. [1]J. S. Dowker and G. Kennedy, “Finite temperature and boundary effects in static space-times,” J. Phys. A 11, 895 (1978). doi:10.1088/0305-4470/11/5/020.DOI
  2. [2]D. Deutsch and P. Candelas, “Boundary effects in quantum field theory,” Phys. Rev. D 20, 3063 (1979). doi:10.1103/PhysRevD.20.3063.DOI
  3. [3]I. Brevik and M. Lygren, “Casimir effect for a perfectly conducting wedge,” Ann. Phys. (N.Y.) 251, 157 (1996). doi:10.1006/aphy.1996.0111.DOI
  4. [4]V. V. Nesterenko, G. Lambiase and G. Scarpetta, “Casimir effect for a perfectly conducting wedge in terms of local zeta function,” Ann. Phys. (N.Y.) 298, 403 (2002) [arXiv:hep-th/0202089]. doi:10.1006/aphy.2002.6261.
  5. [5]D. Fermi and L. Pizzocchero, “Local zeta regularization and the scalar Casimir effect I. A general approach based on integral kernels,” arXiv:1505.00711.arxiv.org/abs/1505.00711
  6. [6]D. Fermi and L. Pizzocchero, “Local zeta regularization and the scalar Casimir effect II. Some explicitly solvable cases,” arXiv:1505.01044.arxiv.org/abs/1505.01044
  7. [7]A. H. Rezaeian and A. A. Saharian, “Local Casimir energy for a wedge with a circular outer boundary,” Class. Quantum Grav. 19, 3625 (2002) [arXiv:hep-th/0110044]. doi:10.1088/0264-9381/19/14/305.DOI
  8. [8]A. A. Saharian and A. S. Tarloryan, “Wightman function and scalar Casimir densities for a wedge with a cylindrical boundary,” J. Phys. A 38, 8763 (2005) [arXiv:hep-th/0504066]. doi:10.1088/0305-4470/38/40/017.DOI
  9. [9]V. V. Nesterenko, G. Lambiase and G. Scarpetta, “Casimir energy of a semicircular infinite cylinder,” J. Math. Phys. 42, 1974 (2001) [arXiv:hep-th/0005257]. doi:10.1063/1.1361064.DOI
  10. [10]J. S. Dowker, “Divergences in the Casimir energy,” arXiv:hep-th/0006138.DOI
  11. [11]I. Brevik, S. Å. Ellingsen and K. A. Milton, “Electrodynamic Casimir effect in a medium-filled wedge,” Phys. Rev. E 79, 041120 (2009) [arXiv:0901.4214]. doi:10.1103/PhysRevE.79.041120.DOI
  12. [12]S. Å. Ellingsen, I. Brevik and K. A. Milton, “Electrodynamic Casimir effect in a medium-filled wedge. II,” Phys. Rev. E 80, 021125 (2009) [arXiv:0905.2088]. doi:10.1103/PhysRevE.80.021125.DOI
  13. [13]S. Å. Ellingsen, I. Brevik and K. A. Milton, “Casimir effect at nonzero temperature for wedges and cylinders,” Phys. Rev. D 81, 065031 (2010) [arXiv:1001.2630]. doi:10.1103/PhysRevD.81.065031.DOI
  14. [14]K. A. Milton, J. Wagner and K. Kirsten, “Casimir effect for a semitransparent wedge and an annular piston,” Phys. Rev. D 80, 125028 (2009) [arXiv:0911.1123]. doi:10.1103/PhysRevD.80.125028.DOI
  15. [15]P. Gosdzinsky and A. Romeo, “Energy of the vacuum with a perfectly conducting and infinite cylindrical surface,” Phys. Lett. B 441, 265 (1998) [arXiv:hep-th/9809199]. doi:10.1016/S0370-2693(98)01164-2.DOI
  16. [16]S. A. Fulling, F. D. Mera and C. S. Trendafilova, “Torque anomaly in quantum field theory,” Phys. Rev. D 87, 047702 (2013) [arXiv:1212.6249]. doi:10.1103/PhysRevD.87.047702.DOI
  17. [17]J. S. Dowker, “A note on the torque anomaly,” arXiv:1302.1445.
  18. [18]K. A. Milton, F. Kheirandish, P. Parashar, E. K. Abalo, S. A. Fulling, J. D. Bouas, H. Carter and K. Kirsten, “Investigations of the torque anomaly in an annular sector. I. Global calculations, scalar case,” Phys. Rev. D 88, 025039 (2013) [arXiv:1306.0866]. doi:10.1103/PhysRevD.88.025039.DOI
  19. [19]K. A. Milton, P. Parashar, E. K. Abalo, F. Kheirandish and K. Kirsten, “Investigations of the torque anomaly in an annular sector. II. Global calculations, electromagnetic case,” Phys. Rev. D 88, 045030 (2013) [arXiv:1307.2535]. doi:10.1103/PhysRevD.88.045030.DOI
  20. [20]R. Estrada, S. A. Fulling and F. D. Mera, “Surface vacuum energy in cutoff models: pressure anomaly and distributional gravitational limit,” J. Phys. A 45, 455402 (2012) [arXiv:1207.7013]. doi:10.1088/1751-8113/45/45/455402.DOI
  21. [21]H. Gies, K. Langfeld and L. Moyaerts, “Casimir effect on the worldline,” JHEP 06, 018 (2003) [arXiv:hep-th/0303264]. doi:10.1088/1126-6708/2003/06/018.DOI
  22. [22]C. Schubert, “Perturbative quantum field theory in the string-inspired formalism,” Phys. Rep. 355, 73 (2001) [arXiv:hep-th/0101036]. doi:10.1016/S0370-1573(01)00013-8.DOI
  23. [23]C. D. Fosco and B. C. Guntsche, “Dynamical Casimir effect in the worldline formulation,” Phys. Rev. D 114, 025016 (2026) [arXiv:2604.13237]. doi:10.1103/vn2g-ryw1.DOI
  24. [24]C. D. Fosco, F. C. Lombardo and F. D. Mazzitelli, “Quantum dissipative effects in moving mirrors: A functional approach,” Phys. Rev. D 76, 085007 (2007) [arXiv:0705.2960]. doi:10.1103/PhysRevD.76.085007.DOI
  25. [25]C. D. Fosco, F. C. Lombardo and F. D. Mazzitelli, “Quantum dissipative effects in moving imperfect mirrors: sidewise and normal motions,” Phys. Rev. D 84, 025011 (2011) [arXiv:1105.2745]. doi:10.1103/PhysRevD.84.025011.DOI
  26. [26]C. D. Fosco and B. C. Guntsche, “Quantum dissipative effects for a real scalar field coupled to a time-dependent Dirichlet surface in d + 1 dimensions,” Phys. Rev. D 110, 105021 (2024) [arXiv:2409.13048]. doi:10.1103/PhysRevD.110.105021.DOI
  27. [27]C. D. Fosco and B. C. Guntsche, “Quantum dissipative effects for a real scalar field coupled to a dynamical Neumann surface in d + 1 dimensions,” Phys. Rev. D 112, 105017 (2025) [arXiv:2510.01992]. doi:10.1103/z8mr-63kx.DOI
  28. [28]C. D. Fosco and B. C. Guntsche, “Pair creation amplitudes for a real scalar field coupled to a time-dependent surface in d + 1 dimensions,” arXiv:2606.10800.
  29. [29]C. Grosche and F. Steiner, Handbook of Feynman Path Integrals, Springer Tracts in Modern Physics 145 (Springer, Berlin, 1998). doi:10.1007/BFb0109520.DOI
  30. [30]H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, 2nd ed. (Oxford University Press, Oxford, 1959).
  31. [31]K. D. Cole, J. V. Beck, A. Haji-Sheikh and B. Litkouhi, Heat Conduc- tion Using Green's Functions, 2nd ed. (CRC Press, Boca Raton, 2011). doi:10.1201/9781439895214.
  32. [32]F. W. J. Olver, A. B. Olde Daalhuis, D. W. Lozier, B. I. Schneider, R. F. Boisvert, C. W. Clark, B. R. Miller, B. V. Saunders, H. S. Cohl and M. A. McClain (eds.), NIST Digital Library of Mathematical Functions, Chapter 10, https://dlmf.nist.gov/10.
  33. [33]H. B. G. Casimir, “On the attraction between two perfectly conducting plates,” Proc. K. Ned. Akad. Wet. 51, 793 (1948), KNAW Digital Library.
  34. [34]L. S. Brown and G. J. Maclay, “Vacuum stress between conducting plates: an image solution,” Phys. Rev. 184, 1272 (1969). doi:10.1103/PhysRev.184.1272.DOI
  35. [35]T. H. Boyer, “Van der Waals forces and zero-point energy for dielectric and permeable materials,” Phys. Rev. A 9, 2078 (1974). doi:10.1103/PhysRevA.9.2078.DOI
  36. [36]P.-S. Kildal, “Artificially soft and hard surfaces in electromagnetics,” IEEE Trans. Antennas Propag. 38, 1537 (1990). doi:10.1109/8.59765.DOI

Paper details

vlnc:W_tte6g476
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 1

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents