betaFeedback

WorksMathematics

The Pólya–Szegő buckling conjecture in dimensions two through forty-seven

Abstract

We prove the Pólya–Szegő buckling conjecture in dimensions 2≤n≤472\le n\le47: among open sets of prescribed finite volume, a ball minimizes the first clamped buckling eigenvalue. More precisely, we establish the sharp comparison Λ1(Ω)≥(jn/2,1/jn/2−1,1)2λ1D(Ω)Λ_1\left(Ω\right)\ge \left(j_{n/2,1}/j_{n/2-1,1}\right)^2 λ_1^{\mathrm D}\left(Ω\right), where λ1Dλ_1^{\mathrm D} is the first Dirichlet eigenvalue and jν,1j_{ν,1} is the first positive zero of the Bessel function JνJ_ν of the first kind. The proof extends a radial calibration to all Hessian directions; positive coefficient expansions and logarithmically convex Laplace integrals control the resulting matrix. A Lipschitz construction handles sign changes and arbitrary boundaries. Equality in the volume bound holds precisely for balls modulo sets of zero H2H^2 capacity. We prove that this calibration fails in every dimension n≥48n\ge48.

Keywords. Buckling eigenvalue; Pólya–Szegő conjecture; Isoperimetric inequality; Bessel functions; Sobolev capacity

2020 Mathematics Subject Classification. Primary 35P15; Secondary 35J40, 49Q10, 33C10, 46E35

Introduction

In 1951, Pólya and Szegő conjectured that, among clamped plates of prescribed area subjected to uniform compression in the plane of the plate, the disk has the least critical buckling load [13]. Its higher-dimensional form asks whether the ball minimizes the first clamped buckling eigenvalue at fixed volume. This is a fourth-order counterpart of the Faber–Krahn theorem for the Dirichlet Laplacian. The question tests how much geometric information can be retained when both the bending energy and the gradient energy enter a variational quotient.

In the planar model, a buckling eigenfunction describes the transverse deflection of a homogeneous thin plate, and the critical compressive load is proportional to the first eigenvalue [5 Section 1]. A trial deflection gives an upper bound immediately; a lower bound must control every admissible deflection. A sharp bound depending only on area therefore gives a shape-independent threshold below which this idealized plate remains stable. In higher dimensions the same problem belongs to spectral geometry and shape optimization: it connects a fourth-order variational problem with sharp second-order spectral inequalities and the geometry of Sobolev spaces.

Let Ω⊂Rn\Omega\subset\mathbb{R}^{n} be open, with 0<∣Ω∣<∞0 < |\Omega| < \infty, where ∣Ω∣|\Omega| denotes Lebesgue measure. For j=1,2j = 1,2, the Sobolev space Hj(Ω)H^{j}(\Omega) consists of functions whose weak derivatives through order jj are square integrable, and H0j(Ω)H_{0}^{j}(\Omega) is the closure of the smooth, compactly supported functions Cc∞(Ω)C_{c}^{\infty}(\Omega) in this space. Define

Λ1(Ω)=inf⁡0≠U∈H02(Ω)∫Ω(ΔU)2 dx∫Ω∣∇U∣2 dx,λ1D(Ω)=inf⁡0≠v∈H01(Ω)∫Ω∣∇v∣2 dx∫Ωv2 dx.(1)\begin{aligned} \Lambda_{1}(\Omega) &= \inf_{0\ne U\in H_{0}^{2}(\Omega)} \frac{\int_{\Omega}(\Delta U)^{2}\,dx}{\int_{\Omega}|\nabla U|^{2}\,dx},\\ \lambda_{1}^{\mathrm{D}}(\Omega) &= \inf_{0\ne v\in H_{0}^{1}(\Omega)} \frac{\int_{\Omega}|\nabla v|^{2}\,dx}{\int_{\Omega}v^{2}\,dx}. \tag*{(1)} \end{aligned}

Here ∇\nabla and Δ\Delta are the Euclidean gradient and Laplacian. On a smooth bounded domain, the first quotient gives the eigenvalue problem

Δ2U+ΛΔU=0in Ω,U=∂nU=0on ∂Ω.\Delta^{2}U+\Lambda\Delta U=0 \quad\text{in }\Omega,\qquad U=\partial_{n}U=0 \quad\text{on }\partial\Omega.

where n\mathbf{n} is the outward unit normal. These are the clamped boundary conditions. The closure definition in (1) continues to make sense for arbitrary open sets.

Write BR(x0)B_{R}(x_{0}) for the open ball of radius RR centered at x0x_{0}, and BR=BR(0)B_{R}=B_{R}(0). Let JηJ_{\eta} denote the Bessel function of the first kind of order η\eta, and jη,lj_{\eta,l} its llth positive zero. The classical ball formulas are

λ1D(BR)=jn/2−1,12R2,Λ1(BR)=jn/2,12R2.\lambda_{1}^{\mathrm{D}}(B_{R})=\frac{j_{n/2-1,1}^{2}}{R^{2}},\qquad\Lambda_{1}(B_{R})=\frac{j_{n/2,1}^{2}}{R^{2}}.

see [5 Sections 1 and 4] and [8 Theorem 3.2 and Section 6]. Writing ωn=∣B1∣\omega_{n}=|B_{1}|, the volume comparison takes the explicit form

∣Ω∣2/nΛ1(Ω)≥ωn2/njn/2,12,∣BR∣=∣Ω∣.|\Omega|^{2/n}\Lambda_{1}(\Omega)\ge\omega_{n}^{2/n}j_{n/2,1}^{2},\qquad|B_{R}|=|\Omega|.

For smooth bounded domains the conjectured equality case is a ball. For arbitrary open sets the precise equality statement involves Sobolev capacity, as explained below. The exponent 2/n2/n is forced by the dilation law Λ1(tΩ)=t−2Λ1(Ω)\Lambda_{1}(t\Omega)=t^{-2}\Lambda_{1}(\Omega) for t>0t>0; the Dirichlet eigenvalue obeys the same law.

The related Rayleigh conjecture concerns a different quotient,

Γ1(Ω)=inf⁡0≠U∈H02(Ω)∫Ω(ΔU)2 dx∫ΩU2 dx\Gamma_1(\Omega)=\inf_{0\ne U\in H_0^2(\Omega)}\frac{\int_\Omega(\Delta U)^2\,dx}{\int_\Omega U^2\,dx}

which describes the vibration of a clamped plate. Talenti’s comparison method [18] was a decisive advance: it treated the positive and negative regions separately and reduced the fourth-order problem to radial comparison problems on two balls. Nadirashvili [11] recovered the sharp planar bound by retaining additional coupling between the rearranged problems. Ashbaugh and Benguria [2] gave a detailed Bessel-function analysis that also proved the three-dimensional vibration inequality. These results established that sign changes need not prevent a sharp fourth-order isoperimetric theorem. They do not, however, establish the corresponding buckling inequality: replacing ∫U2 dx\int U^2\,dx by ∫∣∇U∣2 dx\int|\nabla U|^2\,dx changes the comparison problem.

For buckling, Szegő’s pioneering symmetrization argument [16, 17] proves the planar result under an additional sign assumption on a first eigenfunction. That assumption is unavailable on general domains; the examples and the role of admissibility are discussed in [5 Section 8] and [3]. In particular, taking an absolute value does not generally preserve H2H^2, and ordinary decreasing rearrangement does not supply the required control of ∫(ΔU)2 dx\int(\Delta U)^2\,dx. The obstacle is therefore not simply a missing maximum-principle argument: both the clamped function space and the two energies in the quotient must be retained.

A second approach compares buckling and membrane spectra. Extending the observation of Bramble and Payne [6], Ashbaugh and Laugesen [5] obtained, on bounded domains,

Λ1(Ω)≥cnΛ1(BR),cn=22/njn/2−1,12jn/2,12<1,cn⟶1(n⟶∞).\Lambda_1(\Omega)\ge c_n\Lambda_1(B_R),\qquad c_n=2^{2/n}\frac{j_{n/2-1,1}^2}{j_{n/2,1}^2}<1,\qquad c_n\longrightarrow1\quad(n\longrightarrow\infty).

Their result provides an explicit bound in every dimension and is asymptotically sharp. It also identifies a concrete limitation of that route: the passage through the second Dirichlet eigenvalue and its two-ball volume bound leaves a loss at each fixed dimension. Ashbaugh, Benguria and Laugesen [3] explain why the analogous two-ball reduction is sharp for vibration in dimensions two and three but gives only a partial result for buckling. This is a limitation of those reductions, rather than an obstruction to the conjecture itself.

Shape optimization offers a complementary approach. Ashbaugh and Bucur [4] developed planar existence and relaxation methods and examined the Willms–Weinberger characterization of smooth optimizers. Stollenwerk [14] proved existence of an optimal open set in every dimension, allowing unbounded competitors. Stollenwerk and Wagner [15] proved that a smooth minimizing domain with connected boundary is a ball, using the second domain variation. More recently, Lamboley and Nahon [10] obtained planar boundary regularity near points where the limiting local area fraction is less than one, with a description of the possible angular singularities. These results isolate an important difficulty: existence does not by itself provide all the regularity and geometric hypotheses needed to characterize an optimizer.

Tang and Zhang [19] have announced a sharp planar buckling–Dirichlet comparison in a public working preprint. Their construction uses radial eigenfunctions to define a local transform of a test function and its gradient, together with two divergence corrections. We use this calibration and weak variational framework. Our contribution is its higher-dimensional realization and the analytic estimates that control all Hessian components through dimension forty-seven. We also give a coefficient proof for the planar case.

Our aim is to preserve the ball’s sharp spectral ratio while avoiding assumptions on a minimizing eigenfunction or on an optimal domain. The result is stronger than the volume comparison, because it retains the first Dirichlet eigenvalue of the original set.

We first compare the two eigenvalues on the same open set.

Theorem 1.1. Let 2≤n≤472 \le n \le47. For every open set Ω⊂Rn\Omega\subset\mathbb{R}^{n} of finite positive volume,

Λ1(Ω)≥jn/2,12jn/2−1,12λ1D(Ω).(2)\Lambda_1(\Omega) \ge\frac{j_{n/2,1}^{2}}{j_{n/2-1,1}^{2}}\lambda_1^{D}(\Omega). \tag*{(2)}

The constant is optimal and is attained on balls.

The Faber–Krahn inequality compares λ1D(Ω)\lambda_1^{D}(\Omega) with that of an equal-volume ball; see [7, 13]. It converts Theorem 1.1 into the desired volume bound. For arbitrary open sets, equality in the resulting buckling bound requires an H2H^2-capacity condition. We write C2,2C_{2,2} for the Bessel capacity associated with H2(Rn)H^2(\mathbb{R}^{n}). A set of zero such capacity is negligible for the value trace of H2H^2 functions. A precise definition and the relevant trace criterion are given in § 2.4.

The spectral comparison gives the following sharp volume inequality and equality class.

Corollary 1.2. Under the hypotheses of Theorem 1.1, let ∣BR∣=∣Ω∣|B_R|=|\Omega|. Then

Λ1(Ω)≥jn/2,12R2=Λ1(BR).\Lambda_1(\Omega) \ge\frac{j_{n/2,1}^{2}}{R^{2}}=\Lambda_1(B_R).

Equality holds if and only if

Ω=BR(x0)∖E,C2,2(E)=0,\Omega=B_R(x_0)\setminus E,\qquad C_{2,2}(E)=0,

where EE is relatively closed in BR(x0)B_R(x_0). For n=2,3n=2,3, this means that Ω\Omega is a translated ball. For n≥4n\ge4, sets of zero capacity may be removed.

The proof starts with the first buckling mode and the first Dirichlet mode of a ball. Their quotient determines a scalar profile ff and a local transform F=∣∇U∣f(U/∣∇U∣)F=|\nabla U|f(U/|\nabla U|), extended continuously where the gradient vanishes. Two divergence terms turn the difference between the fourth-order and second-order energies into a quadratic expression in the Hessian D2UD^{2}U, the matrix of second derivatives. We call this identity a calibration: the ball profile is a null direction, and a nonnegative remainder yields the sharp spectral comparison after integration.

The new difficulty in dimension nn lies in the n−1n-1 tangential Hessian directions. Their trace couples to the radial entry, while their trace-free part, obtained by subtracting the scalar matrix with the same trace, has its own coefficient. Controlling only the planar block would leave this term untreated. We prove the required coefficient signs by a residue expansion in which the first remaining pole dominates a possibly signed infinite tail. Positive products for the radial quotient then give a rational energy estimate. This already controls the matrix through dimension ten. In the higher dimensions, a positive Laplace representation, together with two exact endpoint moments, gives the stronger estimate needed for the determinant. Together, these estimates make the Hessian remainder nonnegative for 2≤n≤472 \le n \le47. They follow directly from the radial equations, independently of the spectral comparison, and control entire parameter intervals and infinite coefficient tails.

The global step is equally necessary. The transform is made globally Lipschitz in the independent pair (U,∇U)(U,\nabla U), with the appropriate parities across U=0U=0. Locality of weak derivatives handles {∇U=0}\{\nabla U=0\} even when it has positive measure. Hence no flux is lost across nodal or critical sets. Dilation and Sobolev approximation then prove (2) without assuming that a first buckling eigenfunction is positive, or even using existence of one. Applying Faber–Krahn then gives the volume inequality. The equality argument combines Faber–Krahn rigidity with the clamped Sobolev trace criterion, which explains why zero capacity, rather than zero volume, is the appropriate qualification.

The dimension restriction is intrinsic to this particular calibration. With q=jn/2−1,1q=j_{n/2-1,1} and k=jn/2,1k=j_{n/2,1}, the leading endpoint sign of its coupled determinant is the sign of 3(k2−q2)−4(n−1)3\left(k^{2}-q^{2}\right)-4(n-1). We prove that it is positive for 3≤n≤473 \le n \le47 and negative for every n≥48n \ge48. Thus the method has an exact dimensional endpoint. This does not disprove the buckling conjecture in higher dimensions, nor does the present result settle the separate Rayleigh vibration problem.

Section § 2 contains the calibration construction, the sharp spectral comparison, and the equality argument. § 3 proves the coefficient signs in dimensions three through forty-seven. § 4 supplies the radial bounds and determinant estimates, and § 5 identifies the exact dimensional endpoint of the calibration. Appendix § 6 contains the planar coefficient estimates.

The calibration and the sharp comparison

The proof begins with the ball profiles and a correction of the Hessian energy. We establish positivity of the resulting matrix, pass to a global functional inequality, and then identify the equality cases. The coefficient and multiplier estimates used here are proved in § 3 and § 4, with the planar coefficient argument in Appendix § 6.

Radial construction

All functions are real. We identify H0j(Ω)H_0^j(\Omega) with the closure of the zero extensions of Cc∞(Ω)C_c^\infty(\Omega) in Hj(Rn)H^j(\mathbb{R}^n); the norms agree on these test functions. Integrals without a domain are over the ambient Euclidean space, or over the interval explicitly specified by their limits. The norm of a matrix is its Frobenius norm, ∣H∣2=∑i,jHij2|H|^2 = \sum_{i,j} H_{ij}^2. A symmetric matrix MM is positive semidefinite if vTMv≥0v^{\mathsf T}Mv \ge0 for every real vector vv. A prime or the subscript rr denotes a radial derivative; derivatives with respect to other variables are indicated explicitly. The notation O(ra)O(r^a) has its usual local meaning, with the dimension fixed. The relation f≍gf \asymp g means that the ratio of the two positive quantities stays between positive constants. We use the Bessel series, recurrence relations, zero interlacing, and canonical products in [12 Sections 10.2, 10.6 and 10.21]. For Sturm comparison, which compares the spacing of zeros of second-order equations by ordering their potentials, we use [20 Chapter 5].

For the radial construction put ν=n/2−1\nu= n/2 - 1, q=jν,1q = j_{\nu,1}, k=jν+1,1k = j_{\nu+1,1} and λ=q2/k2\lambda= q^2/k^2. Put m=n−1m = n - 1. Define ψn(r)=2νΓ(ν+1)r−νJν(r)\psi_n(r) = 2^\nu\Gamma(\nu+ 1)r^{-\nu}J_\nu(r), continued by ψn(0)=1\psi_n(0) = 1, where

Γ(z)=∫0∞tz−1e−t dt\Gamma(z) = \int_0^\infty t^{z-1}e^{-t}\,\mathrm{d}t

for z>0z > 0 is the Euler gamma function [12 Section 5.2(i)]. The same formulas define the radial profiles for real n≥2n \ge2, as used in some parameter estimates below. Put

c=−ψn(k)>0,σ=1+c,α=q/k,λ=α2,β=−αψn′(q)c>0,K=β2.c = -\psi_n(k) > 0,\qquad\sigma= 1 + c,\qquad\alpha= q/k,\qquad\lambda= \alpha^2,\qquad\beta= -\frac{\alpha\psi_n'(q)}{c} > 0,\qquad K = \beta^2.

Let X=ψnX = \psi_n, with X(0)=1X(0) = 1, and put

References

  1. [1]D. R. Adams and L. I. Hedberg, Function Spaces and Potential Theory, Grundlehren der mathematischen Wissenschaften 314, Springer, 1996.DOI
  2. [2]M. S. Ashbaugh and R. D. Benguria, On Rayleigh’s conjecture for the clamped plate and its generalization to three dimensions, Duke Math. J. 78 (1995), 1–17.DOI
  3. [3]M. S. Ashbaugh, R. D. Benguria and R. S. Laugesen, Inequalities for the first eigenvalues of the clamped plate and buckling problems, in General Inequalities 7, International Series of Numerical Mathematics 123, Birkhäuser, 1997, 95–110.DOI
  4. [4]M. S. Ashbaugh and D. Bucur, On the isoperimetric inequality for the buckling of a clamped plate, Z. Angew. Math. Phys. 54 (2003), 756–770.DOI
  5. [5]M. S. Ashbaugh and R. S. Laugesen, Fundamental tones and buckling loads of clamped plates, Ann. Scuola Norm. Sup. Pisa Cl. Sci. (4) 23 (1996), 383–402.
  6. [6]J. H. Bramble and L. E. Payne, Pointwise bounds in the first biharmonic boundary value problem, J. Math. Phys. 42 (1963), 278–286.DOI
  7. [7]L. Brasco, G. De Philippis and B. Velichkov, Faber–Krahn inequalities in sharp quantitative form, Duke Math. J. 164 (2015), 1777–1831.DOI
  8. [8]C. De Coster, S. Nicaise and C. Troestler, Nodal properties of eigenfunctions of a generalized buckling problem on balls, Positivity 19 (2015), 843–875.arxiv.org/abs/1408.6180
  9. [9]L.-I. Hedberg and T. H. Wolff, Thin sets in nonlinear potential theory, Ann. Inst. Fourier (Grenoble) 33 (1983), no. 4, 161–187.DOI
  10. [10]J. Lamboley and M. Nahon, Boundary regularity of a fourth order Alt–Caffarelli problem and applications to the minimization of the critical buckling load, preprint, arXiv:2512.18626, 2025.arxiv.org/abs/2512.18626
  11. [11]N. S. Nadirashvili, Rayleigh’s conjecture on the principal frequency of the clamped plate, Arch. Rational Mech. Anal. 129 (1995), 1–10.DOI
  12. [12]F. W. J. Olver, A. B. Olde Daalhuis, D. W. Lozier et al., eds., NIST Digital Library of Mathematical Functions, Chapters 5 and 10, https://dlmf.nist.gov/.
  13. [13]G. Pólya and G. Szegő, Isoperimetric Inequalities in Mathematical Physics, Annals of Mathematics Studies 27, Princeton University Press, 1951.
  14. [14]K. Stollenwerk, On the optimal domain for minimizing the buckling load of a clamped plate, Z. Angew. Math. Phys. 74 (2023), article 12.
  15. [15]K. Stollenwerk and A. Wagner, Optimality conditions for the buckling of a clamped plate, J. Math. Anal. Appl. 432 (2015), 254–273.arxiv.org/abs/1408.6982
  16. [16]G. Szegő, On membranes and plates, Proc. Nat. Acad. Sci. U.S.A. 36 (1950), 210–216.pubmed.ncbi.nlm.nih.gov/16588976
  17. [17]G. Szegő, Note to my paper “On membranes and plates”, Proc. Nat. Acad. Sci. U.S.A. 44 (1958), 314–316.pubmed.ncbi.nlm.nih.gov/16590195
  18. [18]G. Talenti, On the first eigenvalue of the clamped plate, Ann. Mat. Pura Appl. (4) 129 (1981), 265–280.DOI
  19. [19]Q. Tang and H. Zhang, Proof of the Planar Pólya–Szegő Buckling Conjecture, working preprint, 18 October 2026. Public manuscript, version 5, commit 3b3417486b09.
  20. [20]G. Teschl, Ordinary Differential Equations and Dynamical Systems, Graduate Studies in Mathematics 140, American Mathematical Society, 2012.DOI
  21. [21]W. P. Ziemer, Weakly Differentiable Functions, Graduate Texts in Mathematics 120, Springer, 1989.DOI

Paper details

vlnc:W_ve9g7avb
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents