betaFeedback

WorksPhysics and Astronomy

Spontaneous axis formation through defect fusion in active nematics

Abstract

Initially spherical embryos break symmetry to establish a body axis. Topological defects in tissue nematic order have been implicated in axis formation, but the physical mechanisms underlying defect organization in active materials remain unclear. We study an active nematic fluid on a sphere using a fully covariant hydrodynamic theory that ensures thermodynamic consistency in the passive limit. We find that, in compressible systems, active nematic traction drives a spontaneous transition from the equilibrium configuration of four separated +1/2 defects to two antipodal +1 defects through pairwise fusion. The resulting state defines an axis, with aster or vortex textures at the poles depending on the flow-nematic coupling. These results identify a physical mechanism by which active forces reorganize topological defects to establish an axis on a spherical surface.

Introduction. Active fluids with orientational order provide a framework for understanding how local force generation produces collective motion and spatial organization in living matter [1, 2, 3]. Applications range from cytoskeletal filament-motor mixtures to cell layers and tissues [4, 5, 6, 7, 8, 9]. Beyond generating flows, orientational order can organize biological form: nematic alignment accompanies the cytokinetic abscission during cell division [10, 11], convergent extension during gastrulation [12], while topological defects in the supracellular actin network of Hydra are associated with organizing centers of morphogenesis [13, 14]. Understanding how active forces organize these defects is therefore a step toward connecting local mechanics to tissue-scale pattern formation.

Many biological materials are intrinsically confined to curved surfaces, which can influence their function [15, 16, 17]. On closed surfaces, topology constrains the possible defect configurations. A tangent nematic field on a sphere must carry a total topological charge of +2+2 [18]. For a passive nematic in the one-constant approximation, orientational elasticity favors four +1/2+1/2 defects arranged at the vertices of a tetrahedron. Biological textures can exhibit a different organization. In the freshwater polyp Hydra, +1+1 defects in the supracellular actin orientation are associated with the mouth and foot, linking defect organization to the body axis [13, 14]. Similarly, cortical actomyosin reorganizes along the division axis towards the cytokinetic ring during cell division [10, 11]. How can activity reorganize the nematic texture into two integer defects instead of energetically favorable half-integer defects, and how can they be positioned at opposite poles to define a single axis?

Previous works have shown that activity profoundly modifies defect dynamics on curved surfaces. Self-propelled +1/2+1/2-defects can oscillate between tetrahedral and planar configurations on a sphere [19]. More generally, curvature and surface deformation couple to nematic order and defect motion [16, 20, 21, 22, 23, 24].

In active nematics, flows are commonly driven by a nematic active stress. Alternatively, active traction provides coupling between nematic organization and force generation through interaction with a supporting substrate. Recent experiments and theory identified nonlinear active forces that account for cell accumulation around imposed +1+1 defects [25, 26, 27]. How these forces affect defect organization when the nematic field can evolve is largely unknown.

Motivated by experiments that will be described elsewhere, we demonstrate that active surface traction can fundamentally change the organization of active nematics on a spherical shell. Using a covariant hydrodynamic theory, we show that they can generate large-scale surface flows that overcome the elastic repulsion between neighboring +1/2+1/2 defects. These flows can drive fusion of +1/2+1/2 defects into +1+1 defects, which lie at opposite poles. Active surface traction therefore provides a generic physical mechanism through which closed active surfaces spontaneously establish an axis. Beyond explaining how integer defect configurations emerge, our results suggest a route by which active stress can translate topological constraints into body-axis formation during morphogenesis and regeneration.

Theory. We consider a two-dimensional nematic fluid on a fixed sphere of radius RR, Figure 1A. Its state is specified by the tangent velocity field v\mathbf{v} and the tangent nematic tensor Q=S[2n^n^−1]\mathbf{Q}=S[2\hat{\mathbf{n}}\hat{\mathbf{n}}-\mathbf{1}], where SS is the nematic order parameter, n^\hat{\mathbf{n}} the unit director and 1\mathbf{1} is the tangential identity tensor.

Figure 1. Illustration of the system considered. (A) Cut through a sphere to illustrate a surfacic nematic fluid (light gray) in contact with a spherical substrate (dark gray). Orientational order (Q\mathbf{Q}) is also indicated on the half sphere facing the reader, the velocity field v\mathbf{v} (blue) only in the plane of the cut. Red points represent positions of +1/2+1/2-defects, φij\varphi_{ij} denotes the angular distance between defects ii and jj. (B) Mercator plot of the equilibrium nematic texture with four +1/2+1/2-defects (red points). White lines: nematic orientation, color code: nematic order amplitude SS. (C) Three-dimensional view of the nematic field corresponding to panel (B). Gray lines: local nematic directors, color code: as in (B). Parameters are χ=6\chi= 6, ξs=0.5\xi_s = 0.5, α=β=0\alpha= \beta= 0, λ=1\lambda= 1.

The dynamics of the nematic tensor is given by

(∂t+v⋅D)Q+ω⋅Q−Q⋅ω=1ΓH+2λu.(1)(\partial_t+\mathbf{v}\cdot\mathbf{D})\mathbf{Q}+\boldsymbol{\omega}\cdot\mathbf{Q}-\mathbf{Q}\cdot\boldsymbol{\omega}=\frac{1}{\Gamma}\mathbf{H}+2\lambda\mathbf{u}. \tag*{(1)}

Here, D\mathbf{D} denotes the covariant derivative, Γ\Gamma is the rotational viscosity, λ\lambda is the flow-alignment parameter, ω=12(Dv−DvT)\boldsymbol{\omega}=\frac{1}{2}(\mathbf{D}\mathbf{v}-\mathbf{D}\mathbf{v}^{T}) is the vorticity tensor, and u~\tilde{\mathbf{u}} = 12(Dv+DvT)−12(D⋅v)1\frac{1}{2}(\mathbf{D}\mathbf{v}+\mathbf{D}\mathbf{v}^{\mathsf{T}})-\frac{1}{2}(\mathbf{D}\cdot\mathbf{v})\mathbf{1} the traceless strain-rate tensor. The molecular field H=KD2Q+χ(1−S2)Q\mathbf{H}=K\mathbf{D}^{2}\mathbf{Q}+\chi(1-S^{2})\mathbf{Q} derives from a free energy F=∫dQ f\mathcal{F}=\int dQ\,f with

f=−χ2Q:Q+χ8(Q:Q)2+K2(DQ)2.(2)f=-\frac{\chi}{2}\mathbf{Q}:\mathbf{Q}+\frac{\chi}{8}(\mathbf{Q}:\mathbf{Q})^{2}+\frac{K}{2}(\mathbf{D}\mathbf{Q})^{2}. \tag*{(2)}

Here, the parameter χ>0\chi>0 favors a nematic order S=1S=1 and the orientational elasticity KK penalizes spatial variations of Q\mathbf{Q} in the one-constant approximation.

At zero Reynolds number, the velocity field v\mathbf{v} is determined by force balance

D⋅σ=ξsv−fs,(3)\mathbf{D}\cdot\boldsymbol{\sigma}=\xi_s\mathbf{v}-\mathbf{f}_s, \tag*{(3)}

where ξs\xi_s is the substrate friction coefficient. The stress tensor σ\boldsymbol{\sigma} is

σ=−P1+σ~E−2λH+2ηu~+αQ,(4)\boldsymbol{\sigma}=-P\mathbf{1}+\widetilde{\boldsymbol{\sigma}}^{E}-2\lambda\mathbf{H}+2\eta\widetilde{\mathbf{u}}+\alpha\mathbf{Q}, \tag*{(4)}

with shear viscosity η\eta and active stress coefficient α\alpha. In this expression, PP denotes the isotropic part and σ~E\widetilde{\boldsymbol{\sigma}}^{E} is the traceless Ericksen stress

σ~E=−KDQ:DQ+K2(DQ)21+H⋅Q−Q⋅H,(5)\widetilde{\boldsymbol{\sigma}}^{E}=-K\mathbf{D}\mathbf{Q}:\mathbf{D}\mathbf{Q}+\frac{K}{2}(\mathbf{D}\mathbf{Q})^{2}\mathbf{1}+\mathbf{H}\cdot\mathbf{Q}-\mathbf{Q}\cdot\mathbf{H}, \tag*{(5)}

with (DQ:DQ)ij=(DiQkl)(DjQkl)(\mathbf{D}\mathbf{Q}:\mathbf{D}\mathbf{Q})_{ij}=(D_iQ_{kl})(D_jQ_{kl}).

On a curved surface, orientational dynamics and force balance require additional curvature contributions to ensure thermodynamic consistency [28]. This contribution would take the form of an internal stress if the theory was written in terms of an external surface derivative accounting for normal variations. Here, our choice to use only covariant derivatives implies that an external force fs\mathbf{f}_s must be added in (3) to assure the correct equilibrium behavior, see App. . For a sphere of radius RR, it is given by

fs=(β−2)KR2[Q:(DQ)−Q⋅(D⋅Q)].(6)\mathbf{f}_s=(\beta-2)\frac{K}{R^{2}}\left[\mathbf{Q}:\left(\mathbf{D}\mathbf{Q}\right)-\mathbf{Q}\cdot\left(\mathbf{D}\cdot\mathbf{Q}\right)\right]. \tag*{(6)}

The contraction in the first term is [Q:(DQ)]j=QikDiQkj[\mathbf{Q}:(\mathbf{D}\mathbf{Q})]_j=Q_{ik}D_iQ_{kj}. The same tensorial structure appears among the nonlinear active forces used to explain cell accumulation around integer defects on patterned flat substrates [27]. We use this term without constraints on the value of β\beta and consider it to include an active traction force if β≠0\beta\ne0. For a cell, such a force would be transmitted to the surface through adhesion molecules.

We consider two limiting mechanical cases. For an incompressible fluid, D⋅v=0\mathbf{D}\cdot\mathbf{v}=0 and PP acts as a Lagrange multiplier. In the perfectly compressible limit, we omit density-dependent pressure, and the isotropic stress contains elastic, viscous, and active contributions:

−P=f−K2(DQ)2+ηbD⋅v+αiS2,(7)-P=f-\frac{K}{2}(\mathbf{D}\mathbf{Q})^{2}+\eta_b\mathbf{D}\cdot\mathbf{v}+\alpha_iS^{2}, \tag*{(7)}

where ηb\eta_b is the bulk viscosity and αi\alpha_i the isotropic active stress coefficient. For simplicity, we set ηb=η\eta_b=\eta.

We use spherical coordinates {θ,ϕ}\{\theta,\phi\} with θ\theta the colatitude measured from the north pole. All vectors and tensor components are expressed in the local orthonormal basis {e^θ,e^ϕ}\{\hat{\mathbf{e}}_\theta,\hat{\mathbf{e}}_\phi\}. Explicit expressions for the covariant derivatives are given in App. B. For numerical computations, we expand the dynamic fields v\mathbf{v} and Q\mathbf{Q} in terms of spin-weighted spherical harmonics, App. C.

We nondimensionalize lengths by RR, time by τ=ΓR2/K\tau=\Gamma R^{2}/K, and force densities by f0=K/R3f_0=K/R^{3}, retaining the same symbols for dimensionless quantities. Throughout, we set the dimensionless shear viscosity η=1\eta=1. We describe the nematic texture using SS and the director angle ψ\psi, defined by n^=cos⁡(ψ)e^θ+sin⁡(ψ)e^ϕ\hat{\mathbf{n}}=\cos(\psi)\hat{\mathbf{e}}_\theta+\sin(\psi)\hat{\mathbf{e}}_\phi. The corresponding tensor components are Qθθ=−Qϕϕ=Scos⁡(2ψ)Q_{\theta\theta}=-Q_{\phi\phi}=S\cos(2\psi) and Qθϕ=Ssin⁡(2ψ)Q_{\theta\phi}=S\sin(2\psi).

Results. We start our analysis with the incompressible case. For a passive system, α=β=0\alpha=\beta=0, the system relaxes to thermodynamic equilibrium with four +1/2+1/2-defects at the vertices of a regular tetrahedron, Figure 1B,C. For all pairs of defects (i,j)(i,j), the pairwise angular separations φij\varphi_{ij} satisfy cos⁡(φij)=−1/3\cos(\varphi_{ij})=-1/3 or φij≃1.8π/3\varphi_{ij}\simeq1.8\pi/3, Figure 2A,E.

Figure 2. Incompressible surface nematics with active nematic stress. (A,B) Characterization of the asymptotic states through the minimal defect pair angular distance φij\varphi_{ij} (A) and the mean defect velocity ω+1/2\omega_{+1/2} (B) as a function of the active stress and flow-alignment coefficients α\alpha and λ\lambda. Green lines indicate critical lines from the linear stability analysis of a flat nematic fluid, for the splay mode (full) or the bend mode (dashed). (C,D) Mercator plots of the nematic texture (black lines) superposed with the positions of the +1/2+1/2-defects (red dots) for times t=5t = 5 (light) to t=10t = 10 (dark). Parameter values: α=3\alpha= 3 with λ=2\lambda= 2 (C) and λ=0\lambda= 0 (D). (E,F) Time evolution of the minimal defect-pair angle φij\varphi_{ij} (E) and average defect angular velocity ω+1/2\omega_{+1/2} (F) for different values of active stress α\alpha, with λ=0\lambda= 0. The gray dashed line in (E) corresponds to cos⁡(φij)=−1/3\cos(\varphi_{ij}) = -1/3. Other parameter values: χ=6\chi= 6, ξs=0.5\xi_s = 0.5, β=0\beta= 0.

At β=0\beta=0, active nematic stress generates spontaneous flows and propels the +1/2+1/2 defects, Figure 2, as in planar active nematics [29, 30]. A critical value of active stress αc(λ)\alpha_c(\lambda) is required to trigger spontaneous flows, which is reminiscent of the splay/bend instability where αc∝−1/(λ±1)\alpha_c\propto-1/(\lambda\pm1). If λ≲1\lambda\lesssim1, we find oscillations between attractive and planar defect configurations as describe previously [19], Figure 2D-F. In contrast if ∣λ∣>1|\lambda|>1, a static configuration appears. Strong pressure gradients balance much of the forcing, leaving only weak residual flow, Figure S1. For contractile activity and λ>1\lambda>1, we observe a pairing of two +1/2+1/2-defects into a vortex-like structure, Figure 2A,C. Interestingly, Figure 2B shows that the transition from dynamic to static states is close to the critical line from the linear stability analysis of a flat nematic fluid, α(λ−1)>0\alpha(\lambda-1) > 0 [29], with λc∼1\lambda_c \sim1. However for α(λ±1)<0\alpha(\lambda\pm1) < 0, a flat nematic fluid would undergo a spontaneous flow instability. The static configurations observed for λ≲−1\lambda\lesssim-1 indicate a reentrant transition specific to the topological properties of the sphere, Figure 2A,B.

Figure S1. Figure S1. Incompressible surface nematics with active nematic stress α=−1\alpha= -1. (A,C,E) Mercator plots of the defect trajectory (A), the pressure field (C) and the velocity field (E) for λ=2\lambda= 2 at t=20t = 20. (B,D,F) Similar to A,C,E with λ=0\lambda= 0. Other parameters are χ=6\chi= 6, ξs=0.5\xi_s = 0.5, β=0\beta= 0.

Nematic traction produces a different type of forcing. Consider an isolated, locally planar defect with topological charge qq,

Q=S(ρ)(2n^n^−1),(8)Q = S(\rho) (2\hat{n}\hat{n} - 1), \tag*{(8)}

References

  1. [1]J. Prost, F. Jülicher, and J. F. Joanny, Active gel physics, Nature Physics 11, 111 (2015).DOI
  2. [2]M. C. Marchetti, J. F. Joanny, S. Ramaswamy, T. B. Liverpool, J. Prost, M. Rao, and R. A. Simha, Hydrodynamics of soft active matter, Reviews of Modern Physics 85, 1143–1189 (2013).DOI
  3. [3]A. Doostmohammadi, J. Ignés-Mullol, J. M. Yeomans, and F. Sagués, Active nematics, Nature Communications 9, 3246 (2018).DOI
  4. [4]G. Salbreux, J. Prost, and J. F. Joanny, Hydrodynamics of cellular cortical flows and the formation of contractile rings., Phys. Rev. Lett. 103, 058102 (2009).
  5. [5]T. Sanchez, D. T. N. Chen, S. J. DeCamp, M. Heymann, and Z. Dogic, Spontaneous motion in hierarchically assembled active matter, Nature 491, 431–434 (2012).DOI
  6. [6]T. B. Saw, A. Doostmohammadi, V. Nier, L. Kocgozlu, S. Thampi, Y. Toyama, P. Marcq, C. T. Lim, J. M. Yeomans, and B. Ladoux, Topological defects in epithelia govern cell death and extrusion, Nature 544, 212 (2017).
  7. [7]K. Kawaguchi, R. Kageyama, and M. Sano, Topological defects control collective dynamics in neural progenitor cell cultures, Nature 545, 327 (2017).
  8. [8]P. Chugh and E. K. Paluch, The actin cortex at a glance, Journal of Cell Science 131, 10.1242/jcs.186254 (2018).
  9. [9]K. Copenhagen, R. Alert, N. S. Wingreen, and J. W. Shaevitz, Topological defects promote layer formation in Myxococcus xanthus colonies, Nature Physics 17, 211 (2021), 2001.03804.
  10. [10]D. J. Fishkind and Y. L. Wang, Orientation and three-dimensional organization of actin filaments in dividing cultured cells., The Journal of cell biology 123, 837–848 (1993).
  11. [11]H. Turlier, B. Audoly, J. Prost, and J.-F. Joanny, Furrow Constriction in Animal Cell Cytokinesis, Biophysical journal 106, 114 (2014).DOI
  12. [12]X. Li, R. J. Huebner, M. L. K. Williams, J. Sawyer, M. Peifer, J. B. Wallingford, and D. Thirumalai, Emergence of cellular nematic order is a conserved feature of gastrulation in animal embryos, Nature Communications 16, 5946 (2025).
  13. [13]Y. Maroudas-Sacks, L. Garion, L. Shani-Zerbib, A. Livshits, E. Braun, and K. Keren, Topological defects in the nematic order of actin fibres as organization centres of hydra morphogenesis, Nature Physics 17, 251–259 (2020).
  14. [14]Y. Ravichandran, M. Vogg, K. Kruse, D. J. G. Pearce, and A. Roux, Topology changes of hydra define actin orientation defects as organizers of morphogenesis, Science Advances 11, 10.1126/sciadv.adr9855 (2025).
  15. [15]F. A. Maechler, C. Allier, A. Roux, and C. Tomba, Curvature-dependent constraints drive remodeling of epithelia, Journal of Cell Science 132, jcs222372 (2019).
  16. [16]S. Ehrig, B. Schamberger, C. M. Bidan, A. West, C. Jacobi, K. Lam, P. Kollmannsberger, A. Petersen, P. Tomancak, K. Kommareddy, F. D. Fischer, P. Fratzl, and J. W. C. Dunlop, Surface tension determines tissue shape and growth kinetics, Science Advances 5, 10.1126/sciadv.aav9394 (2019).
  17. [17]M. Luciano, C. Tomba, A. Roux, and S. Gabriele, How multiscale curvature couples forces to cellular functions, Nature Reviews Physics 6, 246 (2024).
  18. [18]V. Vitelli and D. R. Nelson, Nematic textures in spherical shells, Physical Review E 74, 10.1103/physreve.74.021711 (2006).DOI
  19. [19]F. C. Keber, E. Loiseau, T. Sanchez, S. J. DeCamp, L. Giomi, M. J. Bowick, M. Marchetti, Z. Dogic, and A. R. Bausch, Topology and dynamics of active nematic vesicles, Science 345, 1135–1139 (2014).
  20. [20]P. W. Ellis, D. J. G. Pearce, Y.-W. Chang, G. Goldsztein, L. Giomi, and A. Fernandez-Nieves, Curvature-induced defect unbinding and dynamics in active nematic toroids, Nature Physics 14, 85–90 (2017).
  21. [21]D. Pearce, P. W. Ellis, A. Fernandez-Nieves, and L. Giomi, Geometrical control of active turbulence in curved topographies, Physical Review Letters 122, 10.1103/physrevlett.122.168002 (2019).
  22. [22]F. Vafa and L. Mahadevan, Active nematic defects and epithelial morphogenesis, Physical Review Letters 129, 10.1103/physrevlett.129.098102 (2022).DOI
  23. [23]C. A. Dessalles, N. Cuny, A. Boutillon, P. F. Salipante, A. Sabatatheri, A. I. Barakat, and G. Salbreux, Interplay of actin nematodynamics and anisotropic tension controls endothelial mechanics, Nature Physics 21, 999–1008 (2025).
  24. [24]P. Guillamat, W. Mirza, P. K. Bal, M. Gómez-González, P. Roca-Cusachs, M. Arroyo, and X. Trepat, Guidance of cellular nematic elastomers into shape-programmable living surfaces, Science 392, 317–323 (2026).
  25. [25]P. Guillamat, C. Blanch-Mercader, G. Pernollet, K. Kruse, and A. Roux, Integer topological defects organize stresses driving tissue morphogenesis, Nature Materials 21, 588 (2022).
  26. [26]M. Dedenon, C. A. Dessalles, P. Guillamat, A. Roux, K. Kruse, and C. Blanch-Mercader, Density-Polarity Coupling in Confined Active Polar Films: Asters, Spirals, and Biphasic Orientational Phases, Physical Review Letters 131, 268301 (2023), 2307.15707.
  27. [27]Z. Zhao, H. Li, Y. Yao, Y. Zhao, F. Serra, K. Kawaguchi, H. Zhang, and M. Sano, Integer topological defects offer a methodology to quantify and classify active cell monolayers, Nature Communications 16, 2452 (2025).
  28. [28]L. Bouck, R. H. Nochetto, and V. Yushutin, A hydrodynamical model of nematic liquid crystal films with a general state of orientational order, Journal of Nonlinear Science 34, 10.1007/s00332-023-09970-6 (2023).
  29. [29]R. Voituriez, J. F. Joanny, and J. Prost, Spontaneous flow transition in active polar gels, EPL (Europhysics Letters) 70, 404 (2005), q-bio/0503022.
  30. [30]L. Giomi, M. J. Bowick, X. Ma, and M. C. Marchetti, Defect Annihilation and Proliferation in Active Nematics, Phys. Rev. Lett. 110, 228101 (2013), 1303.4720.
  31. [31]K. Kawaguchi, R. Kageyama, and M. Sano, Topological defects control collective dynamics in neural progenitor cell cultures, Nature 545, 327 (2017).
  32. [32]N. Rembert, M. Dedenon, A. Roux, and C. A. Dessalles, Nematic order in cellular tissues: a standardized framework and anomalous defect dynamics, bioRxiv 10.64898/2026.04.22.719598 (2026).
  33. [33]G. Duclos, C. Blanch-Mercader, V. Yashunsky, G. Salbreux, J.-F. Joanny, J. Prost, and P. Silberzan, Spontaneous shear flow in confined cellular nematics, Nature Physics 14, 728–732 (2018).
  34. [34]G. M. Vasil, D. Leconet, K. J. Burns, J. S. Oishi, and B. P. Brown, Tensor calculus in spherical coordinates using jacobi polynomials. part-i: Mathematical analysis and derivations, Journal of Computational Physics: X 3, 100013 (2019).arxiv.org/abs/1804.10320
  35. [35]A. E. Lanman, pyspherical: Fast spin-weighted spherical harmonic transforms (2020), python package.
  36. [36]S. Trapani and J. Navaza, Calculation of spherical harmonics and wigner d functions by fft. applications to fast rotational matching in molecular replacement and implementation into amore, Acta Crystallographica Section A 62, 262 (2006).pubmed.ncbi.nlm.nih.gov/16788266
  37. [37]J. D. McEwen and Y. Wiaux, A novel sampling theorem on the sphere, IEEE Transactions on Signal Processing 59, 5876 (2011).DOI

Paper details

vlnc:W_xypafxst
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents