WorksPhysics and Astronomy
Symmetry-Enabled Ferroelectric Valley Transduction in Rhombohedral Bilayer WSe
Abstract
Ferroelectric polarization couples to the layer degree of freedom in a bilayer, but a valley-selective energy response requires the valleys to carry different interlayer character. Rhombohedral bilayer WSe meets that condition by symmetry: three-fold rotation forbids interlayer tunneling at the valley, while strong hybridization remains at . The resulting contrast converts the band-effective ferroelectric layer asymmetry into a shift of the edge, and so displaces the – landscape: a finite-field fit that does not impose the rule leaves the coupling consistent with zero, and the shift reaches \polshiftdft~meV, the most that asymmetry can give a single valley. Reversing the polarization mirrors the valley landscape in displacement field, so the two registries have equal and opposite differential transconductance at zero field. In the ideal symmetric limit a second parity holds about each registry's own compensation field and places a zero of there. The valley-dependent screening calculated here displaces that zero by only \gdnulllow% at the read point, so device asymmetry limits the accuracy. The result links a known stacking selection rule to ferroelectric valley transduction, with a quantitative valley shift and a directly testable transport signature.
A ferroelectric polarization is nonvolatile, and a valley index labels electronic states in momentum space [1, 2]. Layered transition-metal dichalcogenides host both, and stacking controls them [3]. Reversing the polarization reverses a layer-dependent potential, but two valleys can share the same layer character, and such a potential then moves them together. The mechanism has to make one layer potential act differently on different points of the Brillouin zone. We call the resulting conversion of a polar layer asymmetry into a relative shift between valleys of different interlayer character ferroelectric valley transduction.
Rhombohedral transition-metal dichalcogenide bilayers provide such a mechanism. Their two parallel-oriented layers can be translated into two polar registries with opposite out-of-plane polarization Figure 1(a), predicted in sliding bilayers [4] and since observed across layered and marginally twisted systems [5, 6] and in parallel-stacked bilayer WSe itself, whose built-in interlayer potential is measured at 56(3) meV [7], where the two registries meet at mobile domain walls [8]. For the valley, the interlayer matrix element of a 3R bilayer vanishes by a three-fold-rotation selection rule [9]; at , by contrast, the valence states have strong out-of-plane orbital character and form bonding–antibonding combinations Figure 1(b). The selection rule itself is known. This Letter applies the rule to a competing-valley landscape in a bilayer that is also ferroelectric, and reports the electrical signature of the transduction that follows.

Figure 1. Stacking symmetry, valley-selective coupling, and what the polarization does with them. (a) The centrosymmetric 2H bilayer and the two rhombohedral registries, which an interlayer slide takes into one another and which have opposite out-of-plane polarizations. (b) The two valleys meet the layer degree of freedom differently. At in 2H the branches are degenerate and opposite spins forbid the spin-conserving hopping, while the orbital matrix element stays finite [21, 22]; the states therefore stay on their layers. At in R stacking the two layer states have the same spin, and the three-fold selection rule forbids the hopping instead, . At the layers hybridize into bonding and antibonding combinations in either stacking. Color denotes the layer within each panel, bottom in blue and top in red. (c) The consequence. The polarization’s interlayer step is converted into a shift of the edge, the most a decoupled valley can take, while , held together by , barely moves. Panel (b) is drawn for R-MX, whose edge lies on the bottom layer; R-XM is its layer-exchanged mirror. Figure 3 makes the field dependence quantitative.
Bilayer WSe is a particularly direct realization because the valence maxima at and lie close enough that their relative position controls the hole population and transport [10, 11]. The maximum moves from towards as layers are added, because the layers hybridize [12, 13, 14]. Which of the two wins in the bilayer is unsettled: an optical study assigns the edge to [11] and photoemission on quasi-free-standing rhombohedral bilayers to [15]. A third photoemission study resolves both pockets, and the accompanying calculations reverse the ordering between a hybrid functional and a quasiparticle correction [16]. Every claim below is a shift of the landscape or a parity of the response, and holds under either assignment. The two valleys differ sharply in mass [15, 17, 18], and moving the landscape changes the current. Two companion studies treat that landscape as fixed and move the chemical potential across it [19, 20]; here the landscape itself moves. We show that the contrast between a symmetry-decoupled valley and a strongly hybridized valley converts the built-in polar layer asymmetry almost entirely into a shift of the – landscape. The two polar registries then become mirror images along the displacement-field axis, and this mirror relation generates a differential-transport parity. That parity reads the stored polarization through the sign, or through the field position of a zero, and not through an absolute current difference.
For each valley we use a minimal two-layer Hamiltonian in the top/bottom layer basis.
with
Here for R-MX and for R-XM, is the screened dipole length, and represents a static top–bottom environmental asymmetry. The mirror relation below requires . A built-in asymmetry shifts both compensation fields one way, whereas the polarization shifts them oppositely. The pair then ceases to sit symmetrically about zero field and the relation is broken. (2) lets both and depend on the valley. The ideal limit treated below takes the two valleys to share a compensation field, , which is weaker than requiring either quantity to be common. The direct WSe calculations measure the departure from that condition, and we quantify its effect when we reach the readout zero.
The upper branch of Eq. (1) is
and its susceptibility to a layer asymmetry is
Thus a layer-decoupled valley reaches the largest slope Eq. (3) allows, , whereas a strongly hybridized valley responds only weakly. The R-stacked valley is an exact realization of the first limit at the high-symmetry point. If and are the layer Bloch states at , the lateral registry gives them different eigenvalues and . Since ,
and forces the matrix element to vanish [9]. The vanishing is an interference condition on the Bloch phases, not a small material parameter.
Calculations.—VASP [23] with projector augmented-wave potentials [24, 25], the PBE functional [26], non-collinear spin-orbit coupling and DFT-D3 dispersion with Becke–Johnson damping [27, 28]; 600 eV cutoff, eV threshold, 30 Å cell, non-spherical gradients inside the augmentation spheres and one-center occupancies mixed to . Positions were relaxed at fixed cell to eV Å on a -centered mesh [29]. The states reported here are evaluated on that mesh in the polar registries and on in the nonpolar one, where the charge-density symmetrization is disabled; both meshes contain exactly. A finite field enters as a sawtooth potential along the stacking axis; the polar R-stacked slabs use the dipole correction [30]. Convergence tests, the parameter extraction and its conditioning, and a hybrid-functional check are in the companion Article [31].
Our first-principles calculations make that distinction visible. At zero field the states of both R registries are almost completely layer polarized, whereas the top valence states at are shared between the layers [Fig. 2(a)–(c)]. The zone-center bonding–antibonding splitting gives meV. An unconstrained finite-field scan, which assumes nothing about the symmetry, puts below 0.017 meV—three orders of magnitude under at room temperature, and at the resolution of the calculation and not at any scale of the crystal. More decisively, at the compensation field, where the two -layer on-site energies coincide, the inferred coupling rises linearly away from with slopes 160 and 123 meV Å along the two nonequivalent directions, while both extrapolated intercepts are numerically zero [Fig. 2(d)]. A merely small coupling would remain small in a neighborhood of ; the observed linear node is the signature of the selection rule.

Figure 2. Microscopic origin of the valley-selective response. (a)–(c) Layer-resolved valence bands of 2H, R-MX, and R-XM at zero field. Color denotes the layer weight: the R-stacked edge is layer polarized, whereas the valence states at are strongly shared between the layers. (d) At the compensation field the interlayer coupling extracted from the two-level inversion vanishes linearly at and recovers away from it. Lines are fits over Å; separate fits toward and give slopes 160 and 123 meV Å, with intercepts and meV, respectively.
The ferroelectric consequence follows directly from Eq. (3). The band-effective asymmetry of the R-stacked doublet is meV. In the symmetry limit , switching on this asymmetry shifts the upper edge by the maximum allowed amount meV. The unconstrained finite-field fit, which does not assume the selection rule, returns a coupling consistent with zero and gives the same 41.7 meV [Figure 1(c)]. The two routes agree without either granting the other’s premise. The edge barely responds because .
Figure 3 shows the resulting landscape. The two polar registries obey the exact layer-exchange relation
Figure 3. From transduction to a parity readout. The same three fields , and are marked in every panel. (a) For R-MX, the K edge follows the layer asymmetry at close to the ceiling of Eq. (3) while barely moves; color denotes the valley in this panel and the stacking in the other two. (b) The two polar landscapes are exact field-axis mirrors of one another, with minima at for R-MX and for R-XM, and the nonpolar reference sits between them. (c) The differential transconductance inherits that parity, drawn at the subthreshold bias V. The two registries are field-axis mirror images of one another, so they are equal and opposite at and not at every field; each crosses zero once, at its own compensation field, and the nonpolar reference crosses at . Resolving the distinct K- and -valley screening moves the calculated WSe zero from by 0.2% at this bias, too little to see here.
for a top–bottom symmetric environment. Polarization moves one R-stacked landscape to opposite positions along the field axis. The nonpolar 2H reference is not exactly a translated member of that family because stacking also renormalizes the layer-symmetric band energies. This distinction matters for quantitative comparison with 2H but not for the registry relation in Eq. (4).
The same mirror relation gives an electrical observable. In a symmetric dual gate of the kind routinely built on these materials [32], define the common and differential biases and . The differential bias changes the displacement field, and the channel follows: moving the landscape moves the density of states, and with it the hole density. On a symmetric stack every self-consistent quantity is even about the compensation field. The drift is even too, and the parity survives. Equation (4) is a statement about the bands; the step to the current needs the device as well: for a top–bottom symmetric stack whose transport does not distinguish the two layers, the same layer-exchange symmetry gives
where . The antisymmetry of Eq. (5) is exact under those conditions; it relates the two polar states to each other and leaves the magnitude of either open. The two responses can vanish together at a model-dependent common-mode bias, and the sign readout is operated away from that cancellation point. For the centrosymmetric 2H reference, the mirror maps the system to itself and gives , a control that the same sample can supply: chemical-vapour-deposited bilayers grow 2H and 3R regions on one flake [33]. The measurement is a small-signal one and asks for low-resistance contacts, which are now available for WSe [34, 35].
A second and complementary readout follows from a second parity, that of each registry about its own compensation field. In the ideal symmetric two-valley model, when the applied field cancels the polar layer asymmetry, the band energies become even about the compensation field. The current is then stationary and crosses zero. That zero is exact only in the ideal symmetric limit: it additionally assumes that transport does not distinguish the layers and that the two valleys share the same compensation field. The direct WSe calculations quantify the leading band-structure correction. Fitting each doublet separately on the R-stacked field scan gives and , displacing the calculated electrical zero by 1.8% of in strong accumulation and 0.2% near threshold, where Figure 3(c) is drawn. Device asymmetry produces a larger shift: a fractional difference between the two interfaces displaces that zero by of .
A mismatch of one percent already outweighs the band-structure correction. The device, and not the band structure, limits the practical accuracy of this locator. The built-in field of 0.102 V nm reported for this system [11] is the internal field , whereas is the external one, so the two are not directly comparable. Converted with the screening our own scan implies, which agrees with the out-of-plane response reported for the bilayer [36], they give consistent dipole lengths. The remaining difference lies in the interfacial potential assigned to the K states, which the companion Article analyses [31].
This Letter shows what the known selection rule does in a material whose competing valence valleys have opposite interlayer character. In rhombohedral bilayer WSe, the rule converts ferroelectric layer polarization almost maximally into a K– energy displacement. Layer exchange then promotes the transduced valley shift to a testable response parity. In a top–bottom symmetric environment the two polarization states give exactly opposite differential responses at zero applied field. In the ideal transport limit a second parity, that of each registry about its own compensation field, pins a zero of that response there, and the valley-dependent screening computed here moves the WSe locator by only 1.8%. More generally, any switchable polar bilayer that combines a symmetry-decoupled valley with a strongly hybridized competing one should transduce in the same way. These results establish a direct route from stacking symmetry to nonvolatile control and electrical readout of a multivalley landscape.
Acknowledgments
This work was supported by JSPS KAKENHI (Grants No. JP26H02222, No. JP25K01609, No. JP22H05473, and No. JP21H01019). Numerical calculations were carried out on the Numerical Materials Simulator at the National Institute for Materials Science.
References
[1] J. R. Schlaibler, H. Yu, G. Clark, P. Rivera, J. S. Ross, K. L. Seyler, W. Yao, and X. Xu, Valleytronics in 2D materials, Nat. Rev. Mater. 1, 16055 (2016).
[2] D. Xiao, G.-B. Liu, W. Feng, X. Xu, and W. Yao, Coupled spin and valley physics in monolayers of Mo and other group-VI dichalcogenides, Phys. Rev. Lett. 108, 196802 (2012).
[3] S. Manzeli, D. Ovchinnikov, D. Pasquier, O. V. Yazyev, and A. Kis, 2D transition metal dichalcogenides, Nat. Rev. Mater. 2, 17033 (2017).
[4] L. Li and M. Wu, Binary compound bilayer and multi-layer with vertical polarizations: Two-dimensional ferroelectrics, multiferroics, and nanogenerators, ACS Nano 11, 6382 (2017).
[5] Z. Fei, W. Zhao, T. A. Palomaki, B. Sun, M. K. Miller, Z. Zhao, J. Yan, X. Xu, and D. H. Cobden, Ferroelectric switching of a two-dimensional metal, Nature 560, 336 (2018).
[6] A. Weston, E. G. Castanon, V. Enaldiev, F. Ferreira, S. Bhattacharjee, S. Xu, H. Corte-León, Z. Wu, N. Clark, A. Summerfield, T. Hashimoto, Y. Gao, W. Wang, M. Hamer, H. Read, L. Fumagalli, A. V. Kretinin, S. J. Haigh, O. Kazakova, A. K. Geim, V. I. Fal’ko, and R. Gorbachev, Interfacial ferroelectricity in marginally twisted 2D semiconductors, Nat. Nanotechnol. 17, 390 (2022).
[7] X. Wang, K. Yasuda, Y. Zhang, S. Liu, K. Watanabe,
References
- [1]J. R. Schaibley, H. Yu, G. Clark, P. Rivera, J. S. Ross, K. L. Seyler, W. Yao, and X. Xu, Valleytronics in 2D materials, Nat. Rev. Mater. 1, 16055 (2016).DOI
- [2]D. Xiao, G.-B. Liu, W. Feng, X. Xu, and W. Yao, Coupled spin and valley physics in monolayers of MoS₂ and other group-VI dichalcogenides, Phys. Rev. Lett. 108, 196802 (2012).DOI
- [3]S. Manzeli, D. Ovchinnikov, D. Pasquier, O. V. Yazyev, and A. Kis, 2D transition metal dichalcogenides, Nat. Rev. Mater. 2, 17033 (2017).DOI
- [4]L. Li and M. M. Wu, Binary compound bilayer and multilayer with vertical polarizations: Two-dimensional ferroelectrics, multiferroics, and nanogenerators, ACS Nano 11, 6382 (2017).DOI
- [5]Z. Fei, W. Zhao, T. A. Palomaki, B. Sun, M. K. Miller, Z. Zhao, J. Yan, X. Xu, and D. H. Cobden, Ferroelectric switching of a two-dimensional metal, Nature 560, 336 (2018).
- [6]A. Weston, E. G. Castanon, V. Enaldiev, F. Ferreira, S. Bhattacharjee, S. Xu, H. Corte-León, Z. Wu, N. Clark, A. Summerfield, T. Hashimoto, Y. Gao, W. Wang, M. Hamer, H. Read, L. Fumagalli, A. V. Kretinin, S. J. Haigh, O. Kazakova, A. K. Geim, V. I. Fal’ko, and R. Gorbachev, Interface ferroelectricity in marginally twisted 2D semiconductors, Nat. Nanotechnol. 17, 390 (2022).DOI
- [7]X. Wang, K. Yasuda, Y. Zhang, S. Liu, K. Watanabe, T. Taniguchi, J. Hone, L. Fu, and P. Jarillo-Herrero, Interfacial ferroelectricity in rhombohedral-stacked bilayer transition metal dichalcogenides, Nat. Nanotechnol. 17, 367 (2022).DOI
- [8]D. Yang, J. Liang, J. Wu, Y. Xiao, J. I. Dadap, K. Watanabe, T. Taniguchi, and Z. Ye, Non-volatile electrical polarization switching via domain wall release in 3R-MoS₂ bilayer, Nat. Commun. 15, 1389 (2024).DOI
- [9]R. Akashi, M. Ochi, S. Bordács, R. Suzuki, Y. Tokura, Y. Iwasa, and R. Arita, Two-dimensional valley electrons and excitons in noncentrosymmetric 3R-MoS₂, Phys. Rev. Appl. 4, 014002 (2015).DOI
- [10]H. C. P. Movva, T. Lovorn, B. Fallahazad, S. Larentis, K. Kim, T. Taniguchi, K. Watanabe, S. K. Banerjee, A. H. MacDonald, and E. Tutuc, Tunable γ − k valley populations in hole-doped trilayer WSe₂, Phys. Rev. Lett. 120, 107703 (2018).DOI
- [11]Z. Li, P. Thor, G. Kourmoulakis, T. V. Ivanova, T. Taniguchi, K. Watanabe, H. Yu, M. Brotons-Gisbert, and B. D. Gerardot, Highly tunable band structure in ferroelectric r-stacked bilayer WSe₂, Nat. Commun. 17, 2457 (2026).DOI
- [12]H.-P. Komsa and A. V. Krasheninnikov, Effects of confinement and environment on the electronic structure and exciton binding energy of MoS₂ from first principles, Phys. Rev. B 86, 241201 (2012).DOI
- [13]Y. Zhang, T.-R. Chang, B. Zhou, Y.-T. Cui, H. Yan, Z. Liu, F. Schmitt, J. Lee, R. Moore, Y. Chen, H. Lin, H.-T. Jeng, S.-K. Mo, Z. Hussain, A. Bansil, and Z.-X. Shen, Direct observation of the transition from indirect to direct bandgap in atomically thin epitaxial MoSe₂, Nat. Nanotechnol. 9, 111 (2014).DOI
- [14]P.-C. Yeh, W. Jin, N. Zaki, D. Zhang, J. T. Liou, J. T. Sadowski, A. Al-Mahboob, J. I. Dadap, I. P. Herman, P. Sutter, and J. Osgood, R. M., Layer-dependent electronic structure of an atomically heavy two-dimensional dichalcogenide, Phys. Rev. B 91, 041407 (2015).
- [15]N. Chapuis, M. Bouaziz, E. Desgué, I. Gerber, F. Bertarn, P. Legagneux, F. Oehler, J. Chaste, and A. Ouerghi, Epitaxial growth and electronic properties of quasi-free-standing rhombohedral WSe₂ bilayers on cubic W(110), Phys. Rev. Mater. 10, 044003 (2026).DOI
- [16]A. Mahmoudi, M. Bouaziz, A. Chiout, G. Di Berardino, N. Ullberg, G. Kremer, P. Dudin, J. Avila, M. Silly, V. Derycke, D. Romain, M. Pala, I. C. Gerber, J. Chaste, F. Oehler, and A. Ouerghi, Electronic properties of rhombohedrally stacked bilayer WSe₂ obtained by chemical vapor deposition, Phys. Rev. B 108, 045417 (2023).DOI
- [17]E. Kormányos, G. Burkard, M. Gmitra, J. Fabian, V. Zólyomi, N. D. Drummond, and V. Fal’ko, k·p theory for two-dimensional transition metal dichalcogenide semiconductors, 2D Mater. 2, 022001 (2015).DOI
- [18]B. Fallahazad, H. C. P. Movva, K. Kim, S. Larentis, T. Taniguchi, K. Watanabe, S. K. Banerjee, and E. Tutuc, Shubnikov–de Haas oscillations of high-mobility holes in monolayer and bilayer WSe₂: Landau-level degeneracy, effective mass, and negative compressibility, Phys. Rev. Lett. 116, 086601 (2016).DOI
- [19]K. Wakabayashi, S. Adhikary, and K. Tsukagoshi, Valley-landscape engineering in bilayer WSe₂ gate-all-around transistors (2026), arXiv:2606.08955.arxiv.org/abs/2606.08955
- [20]K. Wakabayashi, S. Adhikary, and T. Kameda, Transconductance as a probe of valley thermodynamics in multilayer WSe₂, Phys. Rev. B 114, 115403 (2026).DOI
- [21]A. M. Jones, H. Yu, J. S. Ross, P. Klement, N. J. Ghimire, J. Yan, D. G. Mandrus, W. Yao, and X. Xu, Spin-layer locking effects in optical orientation of exciton spin in bilayer WSe₂, Nat. Phys. 10, 130 (2014).DOI
- [22]J. M. Riley, F. Mazzola, M. Dendzik, M. Michiardi, T. Takayama, L. Bawden, C. Granerød, M. Leandersson, T. Balasubramanian, M. Hoesch, T. K. Kim, H. Takagi, W. Meevasana, P. Hofmann, M. S. Bahramy, J. W. Wells, and P. D. C. King, Direct observation of spin-polarized bulk bands in an inversion-symmetric semiconductor, Nat. Phys. 10, 835 (2014).DOI
- [23]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).pubmed.ncbi.nlm.nih.gov/9984901
- [24]P. E. Blöchl, Projector augmented-wave method, Phys. Rev. B 50, 17953 (1994).pubmed.ncbi.nlm.nih.gov/9976227
- [25]G. Kresse and J. Joubert, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B 59, 1758 (1999).DOI
- [26]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett. 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
- [27]S. Grimme, J. Antony, S. Ehrlich, and H. Krieg, A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu, J. Chem. Phys. 132, 154104 (2010).DOI
- [28]S. Grimme, S. Ehrlich, and L. Goerigk, Effect of the damping function in dispersion corrected density functional theory, J. Comput. Chem. 32, 1456 (2011).DOI
- [29]H. J. Monkhorst and J. D. Pack, Special points for Brillouin-zone integrations, Phys. Rev. B 13, 5188 (1976).DOI
- [30]J. Neugebauer and M. Scheffler, Adsorbate-substrate and adsorbate-adsorbate interactions of Na and K adlayers on Al(111), Phys. Rev. B 46, 16067 (1992).pubmed.ncbi.nlm.nih.gov/10003746
- [31]K. Wakabayashi, S. Adhikary, T. Kameda, and K. Tsukagoshi, Ferroelectric control of the K–T valley landscape in R-stacked bilayer WSe₂ (2026), companion article, submitted jointly with this Letter.
- [32]H. C. P. Movva, A. Rai, S. Kang, K. Kim, B. Fallahazad, T. Taniguchi, K. Watanabe, E. Tutuc, and S. K. Banerjee, High-mobility holes in dual-gated WSe₂ field-effect transistors, ACS Nano 9, 10402 (2015).DOI
- [33]G. Di Berardino, M. Bouaziz, G. Patriarche, J. Chaste, A. Ouerghi, and F. Oehler, Auto-organization of 2H|3R lateral boundaries in bilayer WSe₂ grown by chemical vapor deposition, Phys. Rev. B 111, 125403 (2025).
- [34]P.-C. Shen, C. Su, Y. Lin, A.-S. Chou, C.-C. Cheng, J.-H. Park, M.-H. Chiu, A.-Y. Lu, H.-L. Tang, M. M. Tavakoli, G. Pitner, X. Ji, Z. Cai, N. Mao, J. Wang, V. Tung, J. Li, J. Bokor, A. Zettl, C.-I. Wu, T. Palacios, L.-J. Li, and J. Kong, Ultralow contact resistance between semimetal and monolayer semiconductors, Nature 593, 211 (2021).DOI
- [35]J. Pack, Y. Guo, Z. Liu, B. S. Jessen, L. Holtzmann, S. Liu, M. Cothrine, K. Watanabe, T. Taniguchi, D. G. Mandrus, K. Barmak, J. Hone, and C. R. Dean, Charge-transfer contacts for the measurement of correlated states in high-mobility WSe₂, Nat. Nanotechnol. 19, 948 (2024).DOI
- [36]A. Latruria, M. L. Van de Put, and W. G. Vandenberghe, Dielectric properties of hexagonal boron nitride and transition metal dichalcogenides: from monolayer to bulk, npj 2D Mater. Appl. 2, 6 (2018), values as revised in the Author Correction, npj 2D Mater. Appl. 4, 28 (2020), DOI 10.1038/s41699-020-00163-3.
