betaFeedback

WorksMathematics

Scaling laws for linear-elastic two-variant martensitic phase transitions in general domains

Abstract

We consider a two-well problem within geometrically linear elasticity, on a bounded Lipschitz set in dimension n≥2n\ge 2. We assume that the two wells are compatible through a symmetrized rank-one connection and that the displacement matches their average on the boundary, and we include a regularization based on the total surface energy. We show that there are two distinct regimes, with the energy scaling differently in terms of the surface-energy coefficient \eps: it is proportional to \eps^{2/3} if there are two distinct compatible twin-normal directions, and to \eps^{4/5} if there is only one. This matches previous findings in rectangles and other special geometries, mostly in two dimensions, and the lower bounds obtained by a Fourier method by Raiţă, Rüland, Tissot and Tribuzio (2024). Our results are obtained by explicit constructions, which contain a self-similar refinement of oscillations close to the boundary, and by a short real-space proof of the matching lower bounds.

Introduction

A martensitic phase transition is a solid-to-solid phase transformation in certain metallic alloys, involving an abrupt change of the lattice structure at a critical temperature. At high temperature the material is in a high-symmetry state; at low temperature, two or more variants of a lower-symmetry lattice structure appear. In most situations a fine mixture of different variants is observed, with very characteristic geometric structures. The resulting variants of the deformation of the lattice unit cell are called variants of martensite. The transformation involves coordinated atomic displacements and a change of lattice geometry, without atomic diffusion. The formation and rearrangement of these patterns are central to the shape-memory effect and to the mechanical response of transforming alloys; see Bhattacharya [1]. A basic mathematical question is how the geometry of the transformation strains, the boundary conditions, and the cost of interfaces together determine the energy and length scales of the resulting microstructures.

The variational theory of martensite describes these phenomena through nonconvex elastic energies whose wells represent stress-free configurations. The foundational work of Ball and James [2, 3] established a framework in which fine phase mixtures arise as energy-minimizing sequences, with compatibility restricting which mixtures can be realized by deformations. In geometrically linear elasticity, the corresponding relaxation problem was studied by Kohn [4]. These developments connect crystallographic microstructures with quasiconvexity, Young measures, and differential constraints; a systematic account is given by Müller [5]. Relaxation describes the macroscopic response of arbitrarily fine mixtures, but it does not by itself select a positive microscopic length scale. Such a scale emerges when elastic energy is supplemented by an interfacial or higher-gradient contribution. As customary, we denote by ε\varepsilon the energy per unit area associated with these interfaces.

The role of this regularization was demonstrated by Kohn and Müller [6, 7] in their study of twinning near an austenite–martensite interface. In their scalar model, the elastic energy favors alternating regions in which a derivative takes one of two preferred values, while the boundary data require their oscillations to disappear at the interface. A laminate of uniform width can satisfy this condition only at an additional elastic cost close to the interface, leading to a minimum energy of order ε1/2\varepsilon^{1/2}. A branching pattern instead refines the twins progressively toward the interface, balancing elastic accommodation against the increasing number of interfaces. The resulting minimum energy scales as ε2/3\varepsilon^{2/3}, with matching upper and lower bounds. Local energy estimates and asymptotic self-similarity properties of minimizers have subsequently been established in [8]. More recently, refined local bounds and self-similarity results for various boundary conditions, arbitrary rectangular domains, and arbitrary volume fractions of the martensitic variants have been obtained [9].

Branching is not specific to martensitic transformations. Related competitions between fine-scale accommodation and interfacial cost leading to branching patterns occur, for example, in uniaxial ferromagnets [10], diblock copolymers [11], the Ginzburg–Landau model of type-I superconductors [12], folding patterns in thin films [13, 14, 15], optimal design [16, 17] and other systems. These examples illustrate the broader usefulness of matching upper bounds obtained from explicit constructions with ansatz-free lower bounds. They also underline that the differential constraint and the geometry of the preferred states, rather than branching alone, determine the relevant scaling law; we refer to [18] for an overview.

Passing from a scalar model to elasticity introduces the additional difficulty that the elastic energy depends only on the symmetric part of the displacement gradient and therefore does not directly penalize infinitesimal rotations, so that compatibility and rigidity must be considered together with interfacial regularity. Structural aspects of such vector-valued models have been studied for two-well microstructures with finite surface energy [19], in a sharp-interface limit for geometrically linear elasticity [20], through quantitative rigidity estimates for the cubic-to-tetragonal transformation [21], and for the rigidity of branching microstructures [22]. Branching models have also been extended to multiparameter settings: scaling regimes and optimal needle shapes motivated by low-hysteresis shape-memory alloys [23], partially branched regimes at low volume fraction [24], as well as geometry- and parameter-dependent matching bounds for a martensitic nucleus embedded in an elastic austenitic matrix [25]. These results emphasize that, in vector-valued and multiparameter problems, branching scaling laws must be understood together with rigidity constraints, and a fixed-parameter power law should be distinguished from a uniform description of the full parameter-dependent phase diagram.

A different mechanism arises when the geometry of the two wells becomes degenerate. Chan and Conti [26, 27] studied two-dimensional nonlinear elastic models with SO(2)SO(2) invariance and showed that the number of rank-one connections can change the branching exponent. Their analysis distinguishes a regime with two rank-one connections and ε2/3\varepsilon^{2/3} scaling from a single-connection regime with ε4/5\varepsilon^{4/5} scaling. The latter exploits a vectorial cancellation that is absent from a scalar reduction: one displacement component compensates a shear strain generated by the other. Although one might expect that fewer compatible interface directions lead to a larger minimum energy, the interplay with invariance under rotations leads to a smaller one. Let us address this in the geometrically linear framework used in this paper (the nonlinear setting is almost the same). Rank-one connections in two dimensions between two wells determined by matrices AA and BB can be seen as zeros of the determinant of A−B−SA-B-S, with SS skew symmetric; the determinant is a quadratic expression. If AA and BB are such that there is only one solution, then it is a degenerate solution, and ∣det⁡(A−B−S)∣\lvert\det(A-B-S)\rvert increases only quadratically as one moves away from it. In other words, for neighbouring values of SS the matrix A−B−SA-B-S is also approximately rank-one, so that slightly tilted interfaces have very low elastic energy. Therefore it is possible to bend the domains and obtain a more efficient branching construction. In the case of two rank-one connections, instead, the quadratic equation has two simple solutions. One is used in the construction, and having a second one at a far-away point does not influence the scaling of the energy.

Twinning with spatially varying volume fraction provides another setting in which this mechanism matters. The work [28] established scaling laws for two nonlinear elastic phases with a single rank-one connection under bending-type boundary conditions, obtaining the scaling ε3/4\varepsilon^{3/4} or ε4/5\varepsilon^{4/5}, depending on details of the boundary conditions. In [29] bending-induced twinning for a three-dimensional geometrically linear model with two martensitic variants was studied using displacement or loading conditions that enforce bending, leading to the scaling ε2/3\varepsilon^{2/3}.

Two recent papers are particularly relevant for this work, even if we do not use their results. They place such scaling laws in the more general setting of fields satisfying linear differential constraints. Raiţă, Rüland, and Tissot [30] established ε2/3\varepsilon^{2/3} lower bounds for classes of A\mathcal{A}-free fields on Lipschitz domains for first-order operators. Raiţă, Rüland, Tissot, and Tribuzio [31] extended this approach to higher-order operators, with exponent 2L/(2L+1)2L/(2L+1), where LL is a measure of degeneracy of the compatible interfaces, analogous to the order of the zero of det⁡(A−B−S)\det(A-B-S) in the discussion above. In practice, L=1L=1 and L=2L=2 in the two cases of interest here, so that for the symmetrized gradient they obtain lower bounds of order ε2/3\varepsilon^{2/3} and ε4/5\varepsilon^{4/5} on bounded Lipschitz domains in any dimension. Matching upper bounds are provided for a square in two dimensions. They use a different regularization, which is equivalent at the level of scaling, see Rüland, Tissot, Tribuzio and Zillinger (2025, preprint, arXiv:2507.06773). A general-domain result therefore primarily requires constructing a pattern that realizes the predicted scaling under the full boundary constraint.

Staircase-type configurations in linearized elasticity have been investigated in [32], showing that lower scaling bounds depend both on lamination order and on the occurrence of degenerate symmetrized rank-one directions. Their constructions in selected geometries extend the role of this degeneracy beyond first-order laminates. Incompatible two-well problems, including linearized elasticity, have been studied in a preprint by Piemontese-Fischer (2025, arXiv:2512.12014) after separating off the relaxed bulk-energy contribution. In the two-dimensional elasticity results, general-domain lower bounds are complemented by matching constructions on suitably oriented squares. Domain dependence was recently investigated in [33] for a related class of problems describing martensitic inclusions in an austenitic matrix. In special domains exact solutions with finite boundary energy exist, and they clearly have energy of order ε\varepsilon. Their main result is that for generic domains the energy instead has the higher ε∣ln⁡ε∣\varepsilon|\ln\varepsilon| scaling. This is related to nucleation problems, in which the shape of the martensitic region is itself an unknown [34, 35], and in which corners and boundaries can lower the energy barrier [36, 37].

With the exception of the domain-geometry results in [33], and of the lower bounds in [30, 31, 38], essentially all of the sharp vectorial and geometrically linear scaling laws mentioned in the previous paragraphs have so far been established only in special two-dimensional domains: rectangles or parallelograms with sides aligned with the relevant rank-one directions, and occasionally cubes in higher dimension [24, 32, 38]. The purpose of the present paper is to remove this restriction, both for the 2/32/3 and for the 4/54/5 exponents.

Setting of the problem and main result

Let Ω⊂Rn\Omega\subset\mathbb{R}^n, n≥2n \ge2, be a nonempty bounded Lipschitz open set, and let p,q∈Rn\mathbf{p},\mathbf{q} \in\mathbb{R}^n be nonzero. We write

e(u):=Du+DuT2,(p⊗q)sym:=p⊗q+q⊗p2.e(u) := \frac{Du+Du^T}{2}, \qquad(\mathbf{p}\otimes\mathbf{q})_{\mathrm{sym}} := \frac{\mathbf{p}\otimes\mathbf{q}+\mathbf{q}\otimes\mathbf{p}}{2}.

For definiteness we work with homogeneous boundary conditions, which correspond to the average of the two eigenstrains ±(p⊗q)sym\pm(\mathbf{p}\otimes\mathbf{q})_{\mathrm{sym}}. For

u∈W01,2(Ω;Rn),Du∈BV(Ω;Rn×n),(1)u \in W_0^{1,2}(\Omega;\mathbb{R}^n), \qquad Du \in BV(\Omega;\mathbb{R}^{n\times n}), \tag*{(1)}

we consider

Eε[u,Ω]:=∫Ωmin⁡{∣e(u)−(p⊗q)sym∣2,∣e(u)+(p⊗q)sym∣2} dx+ε∣D2u∣(Ω).(2)E_\varepsilon[u,\Omega] := \int_\Omega\min\left\{ \left|e(u)-(p\otimes q)_{\mathrm{sym}}\right|^2,\left|e(u)+(p\otimes q)_{\mathrm{sym}}\right|^2 \right\}\,dx+\varepsilon|D^2u|(\Omega). \tag*{(2)}

The first term measures departure from the two preferred strains, while the second penalizes the total variation of the displacement gradient. The boundary condition is an idealization of a surrounding medium that prescribes the macroscopic displacement; it does not include the elastic response of an austenitic matrix as an additional variable.

The representation of the wells makes their compatibility explicit. If pp and qq are not parallel, the two compatible twin-normal directions are those of pp and qq, up to normalization and reversal. If they are parallel, these directions coincide and the difference of the preferred strains has rank one. Our main result shows that this distinction determines the exponent for every fixed domain in the above class.

Theorem 1.1 (Energy scaling) Let Ω⊂Rn\Omega\subset\mathbb{R}^n, n≥2n \ge2, be a nonempty bounded Lipschitz open set, and let p,q∈Rnp,q \in\mathbb{R}^n be nonzero. There exists C=C(Ω,p,q)>0C=C(\Omega,p,q)>0 such that for any ε∈(0,1]\varepsilon\in(0,1],

C−1ε2/3≤inf⁡uEε[u,Ω]≤Cε2/3,if p and q are not parallel,C^{-1}\varepsilon^{2/3}\le\inf_u E_\varepsilon[u,\Omega]\le C\varepsilon^{2/3},\qquad\text{if }p\text{ and }q\text{ are not parallel,}
C−1ε4/5≤inf⁡uEε[u,Ω]≤Cε4/5,if p and q are parallel.C^{-1}\varepsilon^{4/5}\le\inf_u E_\varepsilon[u,\Omega]\le C\varepsilon^{4/5},\qquad\text{if }p\text{ and }q\text{ are parallel.}

The infima are taken over the admissible displacements specified in (1.1).

Let us briefly explain our strategy, first for the upper and then for the lower bound. We intend to construct a map u∈W01,2(Ω;Rn)u \in W^{1,2}_0(\Omega;\mathbb{R}^n) which oscillates in the direction qq, with domain branching close to the boundary. This involves picking p⊗qp\otimes q as the relevant rank-one connection. The branching direction cannot be fixed a priori: the typical thickness of the laminate around a point xx has to go to zero as xx approaches ∂Ω\partial\Omega. Therefore the refinement has to follow the boundary; we shall use the distance to the boundary to make this quantitative. In order to obtain uu, we start from a construction v:[0,∞)×R→Rv:[0,\infty)\times\mathbb{R}\to\mathbb{R} for the scalar version of the problem defined on R2\mathbb{R}^2, with ∂2v\partial_2v close to ±1\pm1, and v(0,⋅)=0v(0,\cdot)=0. The first attempt is to use

u(x):=pv(dist⁡(x,∂Ω),q⋅x).(3)u(x):=pv(\operatorname{dist}(x,\partial\Omega),q\cdot x). \tag*{(3)}

Then Du=p⊗q∂2v+p⊗Ddist⁡(⋅,∂Ω)∂1vDu=p\otimes q\partial_2v+p\otimes D\operatorname{dist}(\cdot,\partial\Omega)\partial_1v is close to ±p⊗q\pm p\otimes q, with additional errors coming from ∂1v\partial_1v, and uu vanishes on ∂Ω\partial\Omega. Integrals over Ω\Omega are then turned into integrals over a two-dimensional domain using the coarea formula, if one can bound the Jacobian of the relevant map, which depends on both the modulus of Ddist⁡(⋅,∂Ω)D\operatorname{dist}(\cdot,\partial\Omega) and its orientation with respect to qq. This strategy has several difficulties. First, computing second derivatives of uu is problematic, since the function x↦dist⁡(x,∂Ω)x\mapsto\operatorname{dist}(x,\partial\Omega) does not, in general, have classical second derivatives. In smooth domains, it is smooth close to the boundary, but not in the interior. In convex polyhedra its gradient Ddist⁡(⋅,∂Ω)D\operatorname{dist}(\cdot,\partial\Omega) is piecewise constant, and jumps on hypersurfaces of codimension 1. In particular, it is a function of bounded variation. Therefore (1.3) can only be used directly in a class of convex polyhedra; in a general Lipschitz domain the distance does not possess classical second derivatives, and its distributional derivatives might interact in a complex way with the distributional derivatives of vv.

A second problem arises in the case that p\mathbf{p} and q\mathbf{q} are parallel. Here, even for simple domains and even staying away from singularities of Ddist⁡(⋅,∂Ω)D\operatorname{dist}(\cdot,\partial\Omega), the expression in (1.3) does not have the optimal scaling. After reducing without loss of generality to the case p=q\mathbf{p}=\mathbf{q}, we show below that in regions where dist⁡(⋅,∂Ω)\operatorname{dist}(\cdot,\partial\Omega) is smooth we can use, starting from the two-dimensional construction v~:[0,∞)×R→R2\tilde{v}:[0,\infty)\times\mathbb{R}\to\mathbb{R}^{2} relative to the wells ±e2⊗e2\pm e_{2}\otimes e_{2},

u~(x):=pv~2(dist⁡(x,∂Ω),q⋅x)+Ddist⁡(x,∂Ω)v~1(dist⁡(x,∂Ω),q⋅x).(4)\tilde{u}(x):=\mathbf{p}\tilde{v}_{2}(\operatorname{dist}(x,\partial\Omega),\mathbf{q}\cdot x)+D\operatorname{dist}(x,\partial\Omega)\tilde{v}_{1}(\operatorname{dist}(x,\partial\Omega),\mathbf{q}\cdot x). \tag*{(4)}

This expression exploits cancellation between the first-order derivatives ∂1v~2\partial_{1}\tilde{v}_{2} and ∂2v~1\partial_{2}\tilde{v}_{1} in the shear strain. This cancellation is the origin of the difference between the two scaling regimes in the theorem above, and therefore needs to be preserved when changing the geometry. However, the expression in (1.4) is even less regular than the one in (1.3), as it already contains derivatives of the distance function, which are typically discontinuous. Therefore one needs a regularized version of the distance, which still vanishes on the boundary, and still allows one to use the coarea formula. In turn, in domains with corners the regularized distance function necessarily has second derivatives which diverge close to the boundary, requiring a more careful treatment. In order to make the construction independent of details of the domain, for both scalings we first obtain an explicit construction in a cube, in the spirit of [24, 39], and then show that a general domain can be covered by countably many cubes, with an appropriate bound on the energy (in practice, we shall need a boundary layer of thickness ε\varepsilon so that the number of effectively used cubes is finite and of order ε1−n\varepsilon^{1-n}).

It is worth noting that the construction used for the upper bound in general domains introduces a number of additional internal interfaces, which in the end do not affect the scaling of the energy. At the same time, the strategy used for cubes generalizes to a class of simple domains; for example, in the 2/32/3 case one can easily prove it for generic convex polyhedra. It is easy to imagine that many more domains can be treated that way, generating patterns that are closer to what one expects in reality, but for brevity, we do not discuss the details.

Matching lower bounds have been obtained by Fourier methods in [31]. We give here a different proof in real space using the localization method in the spirit of [27]: small cubes are classified according to whether the surface energy on that cube is large, the strain deviates substantially from the wells, or the displacement itself is large, without relying on any particular ansatz for the minimizer. When p\mathbf{p} and q\mathbf{q} are not parallel, directions orthogonal to at least one of those vectors span Rn\mathbb{R}^{n}. Along such directions, the two-well structure of the energy disappears, and directional Poincaré estimates control all displacement components by the elastic energy. In the parallel case, the same argument leaves the displacement component along the common direction uncontrolled. Recovering control uses a null-Lagrangian identity for 2×22 \times2 minors, followed by a transverse Poincaré inequality. This loss of direct coercivity is the lower-bound counterpart of the cancellation exploited by the upper-bound construction.

The paper is organized as follows. § 2 develops the upper bounds, treating the nonparallel and parallel cases separately and extending the planar constructions first to cubes and then to general domains. § 3 is devoted to the lower bounds. We first present some general localization tools, then explain the localization method for a full-gradient two-well energy. The proof is then presented separately for the symmetric-gradient problem and the case with an additional degeneracy when p\mathbf{p} and q\mathbf{q} are parallel.

Construction for the upper bound

Upper bound when p and q are not parallel

The Kohn–Müller construction for a half-plane

We start by reviewing the by-now classical branching construction by Kohn and Müller [6, 7] (Theorem 2.1 below). For what follows, we need some additional bounds on the function and its derivatives, which are obtained in Lemma 2.2 below.

For ε>0\varepsilon> 0, ω⊂R2\omega\subset\mathbb{R}^{2} open and bounded, and u∈W1,2(ω)u \in W^{1,2}(\omega) with Du∈BV(ω;R2)Du \in BV(\omega; \mathbb{R}^{2}), we write

EKMε[u,ω]:=∫ω(∣∂1u∣2+min⁡{(∂2u±1)2}+ε∣D2u∣) dxdyE_{\mathrm{KM}}^{\varepsilon}[u,\omega] := \int_{\omega} \left(|\partial_{1}u|^{2} + \min\{(\partial_{2}u \pm1)^{2}\} + \varepsilon|D^{2}u|\right)\,\mathrm{d}x\mathrm{d}y

where, as usual in this context, the integral of the last term represents the total variation of the measure D2uD^{2}u. In the entire paper we write D=(∂1,…,∂n)D = (\partial_{1}, \ldots, \partial_{n}) for both the distributional and the weak gradient. In this section we use (x,y)(x,y) for points in R2\mathbb{R}^{2}.

References

  1. [1]Bhattacharya, K.: Microstructure of Martensite: Why It Forms and How It Gives Rise to the Shape-Memory Effect. Oxford University Press, Oxford (2003). https://doi.org/10.1093/oso/9780198509349.001.0001
  2. [2]Ball, J.M., James, R.D.: Fine phase mixtures as minimizers of energy. Arch. Rational Mech. Anal. 100, 13–52 (1987) https://doi.org/10.1007/BF00281246
  3. [3]Ball, J.M., James, R.D.: Proposed experimental tests of a theory of fine mi-crostructure and the two-well problem. Philos. Trans. R. Soc. Lond. A 338, 389–450 (1992) https://doi.org/10.1098/rsta.1992.0013
  4. [4]Kohn, R.V.: The relaxation of a double-well energy. Contin. Mech. Thermodyn. 3, 193–236 (1991) https://doi.org/10.1007/BF01135336
  5. [5]Müller, S.: Variational models for microstructure and phase transitions. In: Calculus of Variations and Geometric Evolution Problems. Lecture Notes in Mathematics, vol. 1713, pp. 85–210. Springer, Berlin, Heidelberg (1999). https://doi.org/10.1007/BFb0092670
  6. [6]Kohn, R.V., Müller, S.: Branching of twins near an austenite–twinned-martensite interface. Philos. Mag. A 66, 697–715 (1992) https://doi.org/10.1080/01418619208201585
  7. [7]Kohn, R.V., Müller, S.: Surface energy and microstructure in coherent phase transitions. Comm. Pure Appl. Math. 47, 405–435 (1994) https://doi.org/10.1002/cpa.3160470402
  8. [8]Conti, S.: Branched microstructures: scaling and asymptotic self-similarity. Comm. Pure Appl. Math. 53, 1448–1474 (2000) https://doi.org/10.1002/1097-0312(200011)53:11<1448::AID-CPA6>3.0.CO;2-C
  9. [9]Conti, S., Diermeier, J., Koser, M., Zwicknagl, B.: Asymptotic self-similarity of minimizers and local bounds in a model of shape-memory alloys. J. Elasticity 147, 149–200 (2021) https://doi.org/10.1007/s10659-021-09862-4
  10. [10]Choksi, R., Kohn, R.V., Otto, F.: Domain branching in uniaxial ferromagnets: a scaling law for the minimum energy. Comm. Math. Phys. 201, 61–79 (1999) https://doi.org/10.1007/s002200050549
  11. [11]Choksi, R.: Scaling laws in microphase separation of diblock copolymers. J. Nonlinear Sci. 11, 223–236 (2001) https://doi.org/10.1007/s00332-001-0456-y
  12. [12]Conti, S., Otto, F., Serfaty, S.: Branched microstructures in the Ginzburg–Landau model of type-I superconductors. SIAM J. Math. Anal. 48, 2994–3034 (2016) https://doi.org/10.1137/15M1028960
  13. [13]Ben Belgacem, H., Conti, S., DeSimone, A., Müller, S.: Energy scaling of compressed elastic films – three-dimensional elasticity and reduced theories. Arch. Rational Mech. Anal. 164, 1–37 (2002) https://doi.org/10.1007/s002050200206
  14. [14]Bella, P., Kohn, R.V.: Wrinkles as the result of compressive stresses in an annular thin film. Comm. Pure Appl. Math. 67(5), 693–747 (2014) https://doi.org/10.1002/cpa.21471
  15. [15]Bourne, D., Conti, S., Müller, S.: Energy bounds for a compressed elastic film on a substrate. J. Nonlinear Sci. 27, 453–494 (2017) https://doi.org/10.1007/s00332-016-9339-0
  16. [16]Kohn, R.V., Wirth, B.: Optimal fine-scale structures in compliance minimization for a uniaxial load. Proc. R. Soc. A 470(2170), 20140432 (2014) https://doi.org/10.1098/rspa.2014.0432
  17. [17]Kohn, R.V., Wirth, B.: Optimal fine-scale structures in compliance minimization for a shear load. Comm. Pure Appl. Math. 69(8), 1572–1610 (2016) https://doi.org/10.1002/cpa.21589
  18. [18]Kohn, R.V.: Energy-driven pattern formation. In: Sanz-Solé, M., Soria, J., Varona, J.L., Verdera, J. (eds.) Proceedings of the International Congress of Mathematicians, Madrid 2006, vol. 1, pp. 359–383. Eur. Math. Soc., Zürich (2007). https://doi.org/10.4171/022-1/15
  19. [19]Dolzmann, G., Müller, S.: Microstructures with finite surface energy: the two-well problem. Arch. Rational Mech. Anal. 132, 101–141 (1995) https://doi.org/10.1007/BF00380505
  20. [20]Conti, S., Schweizer, B.: A sharp-interface limit for a two-well problem in geometrically linear elasticity. Arch. Rational Mech. Anal. 179, 413–452 (2006) https://doi.org/10.1007/s00205-005-0397-y
  21. [21]Capella, A., Otto, F.: A quantitative rigidity result for the cubic-to-tetragonal phase transition in the geometrically linear theory with interfacial energy. Proc. R. Soc. Edinburgh A 142, 273–327 (2012) https://doi.org/10.1017/S0308210510000478
  22. [22]Simon, T.M.: Rigidity of branching microstructures in shape memory alloys. Arch. Rational Mech. Anal. 241(3), 1707–1783 (2021) https://doi.org/10.1007/ Zwicknagl, B.: Microstructures in low-hysteresis shape memory alloys: scaling regimes and optimal needle shapes. Arch. Rational Mech. Anal. 213, 355–421 (2014) https://doi.org/10.1007/s00205-014-0736-y
  23. [24]Conti, S., Zwicknagl, B.: Low volume-fraction microstructures in martensites and crystal plasticity. Math. Models Methods Appl. Sci. 26, 1319–1355 (2016) https://doi.org/10.1142/S0218202516500317
  24. [25]Conti, S., Diermeier, J., Melching, D., Zwicknagl, B.: Energy scaling laws for geometrically linear elasticity models for microstructures in shape memory alloys. ESAIM Control Optim. Calc. Var. 26, 115 (2020) https://doi.org/10.1051/cocv/2020020 . 64 pp.
  25. [26]Chan, A., Conti, S.: Energy scaling and domain branching in solid-solid phase transitions. In: Griebel, M. (ed.) Singular Phenomena and Scaling in Mathematical Models, pp. 243–260. Springer, Cham (2014). https://doi.org/10.1007/978-3-319-00786-1_11
  26. [27]Chan, A., Conti, S.: Energy scaling and branched microstructures in a model for shape-memory alloys with $SO(2)$ invariance. Math. Models Methods Appl. Sci. 25, 1091–1124 (2015) https://doi.org/10.1142/S0218202515500281
  27. [28]Conti, S., Kohn, R.V., Misiats, O.: Energy minimizing twinning with variable volume fraction, for two nonlinear elastic phases with a single rank-one connection. Math. Models Methods Appl. Sci. 32, 1671–1723 (2022) https://doi.org/10.1142/S0218202522500397
  28. [29]Conti, S., Kohn, R.V., Misiats, O.: An energy minimization approach to twinning with variable volume fraction. J. Elasticity 155, 269–303 (2024) https://doi.org/10.1007/s10659-022-09952-x . Published online in 2022
  29. [30]Raiță, B., Rüland, A., Tissot, C.: On scaling properties for two-state problems and for a singularly perturbed $T_3$ structure. Acta Appl. Math. 184, 5 (2023) https://doi.org/10.1007/s10440-023-00557-7 . 50 pp.
  30. [31]Raiță, B., Rüland, A., Tissot, C., Tribuzio, A.: On scaling properties for a class of two-well problems for higher order homogeneous linear differential operators. SIAM J. Math. Anal. 56, 3720–3758 (2024) https://doi.org/10.1137/23M1588287
  31. [32]Machill, L., Rüland, A.: The energy scaling behaviour of singular perturbation models of staircase type in linearized elasticity for higher order laminates. Arch. Rational Mech. Anal. 250, 80 (2026) https://doi.org/10.1007/s00205-026-02228-x . 75 pp.
  32. [33]Ginster, J., Rüland, A., Tribuzio, A., Zwicknagl, B.: On the effect of geometry on scaling laws for a class of martensitic phase transformations. Ann. Inst. H. Poincaré C Anal. Non Linéaire 43, 1299–1338 (2026) https://doi.org/10.4171/AIHPC/163
  33. [34]Knüpfer, H., Kohn, R.V.: Minimal energy for elastic inclusions. Proc. R. Soc. A 467(2127), 695–717 (2011) https://doi.org/10.1098/rspa.2010.0316
  34. [35]Knüpfer, H., Kohn, R.V., Otto, F.: Nucleation barriers for the cubic-to-tetragonal phase transformation. Comm. Pure Appl. Math. 66, 867–904 (2013) https://doi.org/10.1002/cpa.21448
  35. [36]Bella, P., Goldman, M.: Nucleation barriers at corners for a cubic-to-tetragonal phase transformation. Proc. Roy. Soc. Edinburgh Sect. A 145(4), 715–724 (2015) https://doi.org/10.1017/S0308210515000086
  36. [37]Tribuzio, A., Zemas, K.: Energy barriers for boundary nucleation in a two-well model without gauge invariances. Calc. Var. Partial Differential Equations 64(1), 11 (2025) https://doi.org/10.1007/s00526-024-02850-1
  37. [38]Rüland, A., Tribuzio, A.: On the scaling of the cubic-to-tetragonal phase transformation with displacement boundary conditions. J. Elasticity 156(3), 837–875 (2024) https://doi.org/10.1007/s10659-024-10075-8
  38. [39]Rüland, A., Tribuzio, A.: On the energy scaling behaviour of singular perturbation models with prescribed Dirichlet data involving higher order laminates. ESAIM Control Optim. Calc. Var. 29, 68 (2023) https://doi.org/10.1051/cocv/2023047
  39. [40]Conti, S.: A lower bound for a variational model for pattern formation in shape-memory alloys. Contin. Mech. Thermodyn. 17, 469–476 (2006) https://doi.org/10.1007/s00161-006-0013-x

Paper details

vlnc:W_yzanaxxr
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Claude

View statement
Looking for related papers…
Contents