betaFeedback

WorksMathematics

The Optimal Interface Method: A Modelling Paradigm for Two-Body Contact Problems via Optimal Control and ΓΓ-convergence

Abstract

This paper is concerned with the derivation of a model governing the equilibrium configuration of two linearly elastic bodies that may come into contact with each other. The contact zone, or coincidence set, is an a priori unknown of the model, and the equilibrium configuration is governed by variational inequalities. We introduce a new modelling paradigm in which the contact interface between the two linearly elastic bodies under consideration is now regarded as the primary variable of an optimal control problem whose states are the unique solutions of two independent unilateral contact problems for which this very contact interface represents the obstacle itself. As a result, the free boundary emerges as the solution of a low-dimensional optimisation problem rather than as the active set of coupled variational inequalities. We establish the existence and uniqueness of optimal controls minimising the reduced cost functional arising from the modelling paradigm introduced beforehand, and we show that the family of marginal energy functionals associated with such model ΓΓ-converges to the energy functional associated with the original variational inequalities as the positive cost parameter ββ in the reduced cost functional tends to zero. This ΓΓ-convergence argument also yields a characterisation of the coincidence set of the limit problem in terms of the optimal interfaces. We further show that, after a suitable regularisation, the reduced cost functional is Gâteaux differentiable, and that its Gâteaux derivative can be explicitly computed without solving any adjoint system. Finally, we corroborate the ΓΓ-convergence result obtained beforehand with numerical experiments on a simplified and exactly solvable configuration.

Introduction

The unilateral contact of a linearly elastic body with a rigid foundation was first formulated by Signorini [48]. In its modern form, the problem consists in finding a displacement field satisfying the equilibrium equations together with the Signorini conditions on the contact zone, i.e., non-penetration of the foundation and vanishing normal traction wherever contact is not active. Since these conditions are expressed as inequalities rather than equations, the problem admits no classical (namely, in terms of the Euler–Lagrange equations) formulation and is instead cast as variational inequalities over the closed convex cone of kinematically admissible displacements. The existence and uniqueness of the solution for such contact problem were established by Fichera [25, 26], and the formulation was subsequently placed in the general framework of elliptic variational inequalities by Lions & Stampacchia [23, 35]. Obstacle problems in elasticity were recently studied by P.G. Ciarlet and his collaborators [15, 16, 17, 18, 42, 43, 44, 45]. The modelling and analysis of the deformation of linearly elastic virus capsids, modelled as a lattice, subject to lying over a flat rigid surface were carried out by means of the theory of obstacle problems by Temam and his group [32, 46, 47].

The optimal control of variational inequalities is another interesting problem, and has long been studied in the mathematical literature. Adams, Lenhart and Yong studied an optimal control problem for scalar variational inequalities with vanishing source term in [3]. In this paper, the control was the obstacle determining the set of admissible solutions. In [2], Adams and Lenhart extended the previous work to the case where the source term is non-vanishing, while maintaining the scalar setting. In [1], Adams and Lenhart studied an optimal control for scalar parabolic obstacle problems where, again, the control is the obstacle identifying the set of admissible solutions. It is worth mentioning that in [1, 10] the authors chose to model the energy paid by the system to implement non-flat control by means of a biharmonic operator to be able to leverage compactness that is not, at least a priori, available for the standard modelling by means of an energy of Dirichlet type employed in [2, 3, 33].

The problem we are here concerned with amounts to finding the equilibrium position of two linearly elastic bodies that, when deformed, may come to contact with each other. The central difficulties in the study of such problems lie not in determining the existence and uniqueness of displacement fields associated with the minimal energy configuration, but in the analysis of the coincidence set, defined as the subset of the contact zone on which the two bodies actually touch, and in determining a suitable relaxation of the original variational inequalities. The difficulty in the study of the coincidence set is due to the fact that it is a priori unknown and, generally, not smooth. For what concerns the search for an approximation of the original variational inequalities modelling the contact problem under consideration, the classical approximation by penalty method fails to be a stepping stone for the numerical treatment of the problem, since the penalty term couples the two displacement fields through a four-dimensional fibre product.

Novelties and main results. In this paper we propose a different point of view, which is the main modelling contribution of this work. Our approach consists in promoting the separating interface from an unknown to a primary variable. More precisely, the separating interface is regarded as the control variable of an optimal control problem, that we denote by Problem Cβ(K)\mathcal{C}_{\beta}(K), and the mechanical system is naturally driven towards choosing the interface that is least energetically expensive. Specifically, we look for a surface ψ\psi of H02H^{2}_{0} regularity, identified with its three-dimensional extension Ψ\Psi that is constant along the transverse variable, and that separates the two deformed bodies. We then minimise the total elastic energy of the two bodies augmented by a cost term penalising the curvature of the interface. The cost parameter, that we denote by β>0\beta> 0, weights the interface curvature against the elastic energy. For large values of β\beta, the model drives the mechanical system towards selecting interfaces that are as flat as possible, while for small values of β\beta the main energetic contribution is due to the elastic energy of the two linearly elastic bodies under consideration, and the interface is thus free to adapt to the contact geometry at a negligible cost.

For a prescribed interface, we are then able to obtain two independent single-body unilateral problems in which the interface plays the role of the obstacle. The non-interpenetration constraint is enforced by the interface itself, thus lowering the complexity of the problem under consideration. As a result, the free boundary is no longer an unknown active set to be tracked, but the solution of a less complex optimisation problem posed over the space of admissible interfaces. We now discuss the two new results presented here:

  1. Our first main result is a characterisation of the coincidence set of Problem P(Ω(1);Ω(2))\mathcal{P}(\Omega^{(1)};\Omega^{(2)}), the variational problem formulated in terms of variational inequalities governing the deformation of two linearly elastic bodies that are not allowed to interpenetrate. We obtain this characterisation by approximating Problem P(Ω(1);Ω(2))\mathcal{P}(\Omega^{(1)};\Omega^{(2)}) via an optimal control problem, Problem Cβ(K)\mathcal{C}_{\beta}(K), in which the admissible controls are virtual interfaces separating the two bodies and acting as obstacles. The connection between the coincidence set of the original obstacle problem and the optimal control formulation is investigated via a Γ\Gamma-convergence argument which, to our knowledge, has not been previously resorted to in the literature. More precisely, we show that the optimal states for Problem Cβ(K)\mathcal{C}_{\beta}(K) converge to the solution of Problem P(Ω(1);Ω(2))\mathcal{P}(\Omega^{(1)};\Omega^{(2)}) in L2L^{2} as β→0\beta\to0 (Theorem Theorem 4.5).

  1. Our second main result amounts to proposing a formulation for the regularised cost functional for which its Gâteaux derivative is obtained without solving any adjoint system (Theorem Theorem 6.3). More precisely, we will show that an application of the envelope theorem (cf., e.g., [38] and Section 6.1

in [9]) shows that the Gâteaux derivative of the regularised reduced cost functional reduces to a direct post-processing of the state, rather than requiring the solution of an adjoint problem. As a result, the algorithm we propose for implementing the method presented here does not require the implementation of the loop associated with the adjoint problem, as it is instead customary for other models [2, 3, 4, 10, 33].

It is worth mentioning that the scalar nature of the models treated in the literature discussed beforehand [1, 2, 3, 4, 10, 33] allows the integration domain of the optimal control problem to be the same as the integration domain of the state problems, and leads to significant simplifications in the mathematical analysis. These simplifications are lost in our formulation, as the state problems are integrated over two separate three-dimensional sets and the confinement condition is defined along vertical fibres.

The main goal of this paper is the development of a modelling paradigm for two-body unilateral contact in which the separating interface is promoted from an unknown to the primary variable of an optimal control problem, so that the free boundary is recovered as the solution of a low-dimensional energy minimisation. This paradigm is well-posed, is consistent with the classical formulation based on variational inequalities, and gives rise to a gradient descent algorithm that does not require solving any adjoint system.

Structure of the paper. The paper is divided into seven sections, including this one. In § 2 we present the notation and the geometrical framework. In § 3 we formulate the contact problem between two linearly elastic bodies as a set of variational inequalities posed over a non-empty, closed and convex subset of the product space of admissible displacements, and we prove that this problem admits a unique solution (Theorem 3.1). In § 4 we introduce the optimal control approximation, in which a virtual interface acts both as control and as obstacle, we prove existence and uniqueness of the optimal control and of the optimal states (Theorem 4.4), and we show that the family of marginal energy functionals Γ\Gamma-converges to the energy functional associated with the variational problem presented in § 3 (Theorem 4.5), thereby justifying the optimal control formulation. In § 5 we penalise the optimal control by means of a non-differentiable term and prove convergence of the penalised solutions and controls (Theorem 5.3). In § 6 we consider a Moreau–Yosida regularisation of this penalty term, show that the control-to-state mapping is Gâteaux differentiable, and that the reduced cost functional is Gâteaux differentiable as well. This differentiability is used to implement a gradient descent method, that does not require solving any adjoint system, in the numerical experiments reported in § 7. A list of symbols is appended to facilitate the reading.

Geometrical and Analytical Preliminaries

For a review of the standard concepts in differential geometry utilized here, one may consult references such as [12] or [13]. Unless employed for sequence indexing, Latin indices are constrained to the set {1,2,3}\{1,2,3\}, Greek indices are constrained to the set {1,2}\{1,2\}, and the Einstein summation convention is systematically applied in conjunction with these two rules.

Given an open set Ω⊂R3\Omega\subset\mathbb{R}^{3}, the symbols L2(Ω)L^{2}(\Omega) and H1(Ω)H^{1}(\Omega) represent the conventional Lebesgue and Sobolev spaces. The space D(Ω)\mathcal{D}(\Omega) consists of all infinitely differentiable functions defined on Ω\Omega whose support is compact in Ω\Omega. The norm in a vector space XX is denoted by ∥⋅∥X\lVert\cdot\rVert_{X}. Bold typeface, as in L2(Ω)L^{2}(\Omega) or H1(Ω)H^{1}(\Omega), is used to designate spaces consisting of vector-valued functions. Given a measurable function f:Ω→Rf:\Omega\to\mathbb{R}, we denote by {f}+\{f\}^{+} its positive part, whose definition is given by (cf., e.g., [5, 24]) {f}+(x):=max⁡{f(x),0}\{f\}^{+}(x):=\max\{f(x),0\} for a.a. x∈Ωx\in\Omega, and we denote by {f}−\{f\}^{-} its negative part, whose definition is given by (cf., e.g., [5, 24]) {f}−(x):=−min⁡{f(x),0}\{f\}^{-}(x):=-\min\{f(x),0\} for a.a. x∈Ωx\in\Omega.

A Lipschitz domain Ω⊂R3\Omega\subset\mathbb{R}^{3} is characterised as a non-empty, bounded, connected, open subset whose boundary Γ\Gamma is Lipschitz continuous, with Ω\Omega situated locally on a single side of Γ\Gamma. The volume element in Ω\Omega is written as dxdx, while dΓd\Gamma denotes the area element on Γ\Gamma. A more comprehensive treatment is available in sources like Section 8.2 of [14]. Furthermore, let Γ=Γ0∪Γ1\Gamma=\Gamma_{0}\cup\Gamma_{1} be a subset of the boundary that is measurable with respect to dΓd\Gamma, satisfying Γ0∩Γ1=∅\Gamma_{0}\cap\Gamma_{1}=\varnothing and area Γ0>0\Gamma_{0}>0. We denote by ν\nu the outer unit normal vector along Γ\Gamma. We denote by Ω‾\overline{\Omega} the closure of Ω\Omega with respect to the Euclidean metric of the ambiance space. The special notation Ω1⋐Ω\Omega_{1}\Subset\Omega means that Ω‾1⊂Ω\overline{\Omega}_{1}\subset\Omega and dist⁡(∂Ω,∂Ω1):=min⁡{∣x−y∣;x∈∂Ω and y∈∂Ω1}>0\operatorname{dist}(\partial\Omega,\partial\Omega_{1}):=\min\{ |x-y|;x\in\partial\Omega\text{ and }y\in\partial\Omega_{1}\}>0.

The three-dimensional “physical space” R3\mathbb{R}^{3} is modelled as a real three-dimensional affine Euclidean space. This is constructed by choosing an origin OO and associating it with a real three-dimensional Euclidean space E3\mathbb{E}^{3}. An orthonormal basis of vectors ei\mathbf{e}^{i} is defined for E3\mathbb{E}^{3}. The Euclidean inner product of a\mathbf{a} and b\mathbf{b} in E3\mathbb{E}^{3} is expressed as a⋅b\mathbf{a}\cdot\mathbf{b}; the Euclidean norm of an element a∈E3\mathbf{a}\in\mathbb{E}^{3} is ∣a∣|\mathbf{a}|; the Kronecker symbol is δji\delta^{i}_{j}.

Without any loss of rigour or generality, we systematically identify R3\mathbb{R}^{3} with the affine Euclidean space E3\mathbb{E}^{3}, meaning that every point x∈R3x\in\mathbb{R}^{3} is associated with a unique geometrical vector Ox→∈E3\overrightarrow{Ox}\in\mathbb{E}^{3}. The combination of the origin O∈R3O\in\mathbb{R}^{3} and the orthonormal basis vectors ei∈E3\mathbf{e}^{i}\in\mathbb{E}^{3} constitutes a Cartesian frame for R3\mathbb{R}^{3}. The components xix_{i} of the vector Ox→\overrightarrow{Ox} with respect to the basis ei\mathbf{e}^{i} are the Cartesian coordinates of the point xx, or the Cartesian components of the vector Ox→\overrightarrow{Ox}. After fixing a Cartesian frame, any point xx is identified with the vector Ox→=xiei∈E3\overrightarrow{Ox}=x_{i}\mathbf{e}^{i}\in\mathbb{E}^{3}. The partial derivative ∂/∂xi\partial/\partial x_{i} is abbreviated as ∂i\partial_{i}.

The closure Ω‾⊂E3\overline{\Omega}\subset\mathbb{E}^{3} symbolises the reference configuration of a linearly elastic body free from external loads. In line with [11], the material is taken to be isotropic, homogeneous, and linearly elastic. The mechanical response of this material is thus determined by its two Lamé constants λ≥0\lambda\geq0 and μ>0\mu>0.

Herein, the abbreviation “a.e.” means “almost everywhere” and “a.a.” means “almost all”. Denote by IΩ\mathbf{I}_{\Omega} the vector field IΩ:Ω‾→E3\mathbf{I}_{\Omega}:\overline{\Omega}\to\mathbb{E}^{3} defined by IΩ(x):=x\mathbf{I}_{\Omega}(x):=x for all x∈Ω‾x\in\overline{\Omega}. Deformations of the reference configuration Ω‾\overline{\Omega} are modelled via displacement vector fields v:Ω‾→R3\mathbf{v}:\overline{\Omega}\to\mathbb{R}^{3}. The deformation of the linearly elastic body Ω‾\overline{\Omega} associated with the displacement v\mathbf{v} takes the form IΩ(x)+vi(x)ei\mathbf{I}_{\Omega}(x)+v_{i}(x)\mathbf{e}^{i} for all or, possibly, a.a. x∈Ω‾x\in\overline{\Omega}. The function space of admissible displacements for the linearly elastic models under consideration is defined as

V(Ω):={v=(vi)∈H1(Ω); v=0 dΓ-a.e. on Γ0},\mathbf{V}(\Omega):=\{\mathbf{v}=(v_{i})\in H^{1}(\Omega);\ \mathbf{v}=\mathbf{0}\ \mathrm{d}\Gamma\text{-a.e. on }\Gamma_{0}\},

and is equipped with the norm

∥v∥V(Ω):=(∑i∥vi∥H1(Ω)2)1/2.\|\mathbf{v}\|_{\mathbf{V}(\Omega)}:=\left(\sum_{i}\|v_{i}\|^{2}_{H^{1}(\Omega)}\right)^{1/2}.

The fourth order three-dimensional elasticity tensor is expressed in Cartesian coordinates, with its components written as AijklA^{ijkl}. Its contravariant components are given by (see, e.g., [11])

Aijkl:=λδijδkℓ+μ(δikδjℓ+δiℓδjk),A^{ijkl}:=\lambda\delta^{ij}\delta^{k\ell}+\mu(\delta^{ik}\delta^{j\ell}+\delta^{i\ell}\delta^{jk}),

and it holds that Aijkl=Ajikl=AkℓijA^{ijkl}=A^{jikl}=A^{k\ell ij}.

For a vector field v∈H1(Ω)\mathbf{v}\in H^{1}(\Omega), the linearised change of metric tensor e(v)=(eij(v))\mathbf{e}(\mathbf{v})=(e_{ij}(\mathbf{v})) is introduced, with components eij(v)e_{ij}(\mathbf{v}) defined by:

eij(v):=12(∂jvi+∂ivj)∈L2(Ω).e_{ij}(\mathbf{v}):=\frac{1}{2}(\partial_{j}v_{i}+\partial_{i}v_{j})\in L^{2}(\Omega).

This tensor is symmetric, meaning that eij(v)=eji(v)e_{ij}(\mathbf{v})=e_{ji}(\mathbf{v}) for every v∈H1(Ω)\mathbf{v}\in H^{1}(\Omega). We now present Korn’s inequality formulated in Cartesian coordinates (refer to, for example, Theorem 6.3-4 in [11]).

References

  1. [1]D. R. Adams and S. Lenhart. Optimal control of the obstacle for a parabolic variational inequality. J. Math. Anal. Appl., 268(2):602–614, 2002.DOI
  2. [2]D. R. Adams and S. Lenhart. An obstacle control problem with a source term. Appl. Math. Optim., 47 (1):79–95, 2003.DOI
  3. [3]D. R. Adams, S. M. Lenhart, and J. Yong. Optimal control of the obstacle for an elliptic variational inequality. Appl. Math. Optim., 38(2):121–140, 1998.DOI
  4. [4]D. R. Adams, V. Hrynkriv, and S. Lenhart. Optimal control of a biharmonic obstacle problem. In Around the research of Vladimir Maz’ya. III, volume 13 of Int. Math. Ser. (N. Y.), pages 1–24. Springer, New York, 2010.DOI
  5. [5]H. Attouch, G. Buttazzo, and G. Michaille. Variational analysis in Sobolev and BV spaces, volume 17 of MOS-SIAM Series on Optimization. Society for Industrial and Applied Mathematics (SIAM), Philadelphia, PA; Mathematical Optimization Society, Philadelphia, PA, second edition, 2014. Applications to PDEs and optimization.
  6. [6]C. Berge. Topological spaces. Dover Publications, Inc., Mineola, NY, 1997. Including a treatment of multi-valued functions, vector spaces and convexity, Translated from the French original by E. M. Patterson, Reprint of the 1963 translation.
  7. [7]S. Boyd and L. Vandenberghe. Convex Optimization. Cambridge University Press, Cambridge, 2004.
  8. [8]H. Brézis. Functional Analysis, Sobolev Spaces and Partial Differential Equations. Springer, New York, 2011.DOI
  9. [9]M. Carter. Foundations of mathematical economics. MIT Press, Cambridge, MA, 2001.
  10. [10]Q. Chen, D. Chu, and R. C. E. Tan. Bilateral obstacle control problem of parabolic variational inequalities. SIAM Journal on Control and Optimization, 46(4):1518–1537, 2007.DOI
  11. [11]P. G. Ciarlet. Mathematical Elasticity. Vol. I: Three-Dimensional Elasticity. North-Holland, Amsterdam, 1988.
  12. [12]P. G. Ciarlet. Mathematical Elasticity. Vol. III: Theory of Shells. North-Holland, Amsterdam, 2000.
  13. [13]P. G. Ciarlet. An Introduction to Differential Geometry with Applications to Elasticity. Springer, Dordrecht, 2005.
  14. [14]P. G. Ciarlet. Linear and Nonlinear Functional Analysis with Applications. Society for Industrial and Applied Mathematics, Philadelphia, second edition, 2025.
  15. [15]P. G. Ciarlet and P. Piersanti. Obstacle problems for Koiter’s shells. Math. Mech. Solids, 24:3061–3079, 2019.DOI
  16. [16]P. G. Ciarlet and P. Piersanti. A confinement problem for a linearly elastic Koiter’s shell. C.R. Acad. Sci. Paris, Sér. I, 357:221–230, 2019.DOI
  17. [17]P. G. Ciarlet, C. Mardare, and P. Piersanti. Un problème de confinement pour une coque membranaire linéairement élastique de type elliptique. C.R. Acad. Sci. Paris, Sér. I, 356(10):1040–1051, 2018.DOI
  18. [18]P. G. Ciarlet, C. Mardare, and P. Piersanti. An obstacle problem for elliptic membrane shells. Math. Mech. Solids, 24(5):1503–1529, 2019.DOI
  19. [19]G. Dal Maso. An introduction to Γ-convergence, volume 8 of Progress in Nonlinear Differential Equations and their Applications. Birkhäuser Boston, Inc., Boston, MA, 1993.
  20. [20]P. Doktor. On the density of smooth functions in certain subspaces of Sobolev space. Comment. Math. Univ. Carolinae, 14:609–622, 1973.
  21. [21]P. Doktor and A. Ženíšek. The density of infinitely differentiable functions in Sobolev spaces with mixed boundary conditions. Appl. Math., 51(5):517–547, 2006.DOI
  22. [22]P. Drábek and J. Milota. Methods of nonlinear analysis. Birkhäuser Advanced Texts: Basler Lehrbücher. [Birkhäuser Advanced Texts: Basel Textbooks]. Birkhäuser/Springer Basel AG, Basel, second edition, 2013. Applications to differential equations.
  23. [23]G. Duvaut and J. L. Lions. Inequalities in Mechanics and Physics. Springer, Berlin, 1976.
  24. [24]L. C. Evans and R. F. Gariepy. Measure theory and fine properties of functions. Textbooks in Mathematics. CRC Press, Boca Raton, FL, revised edition, 2015.
  25. [25]G. Fichera. Sul problema elastostatico di Signorini con ambigue condizioni al contorno. Atti Accad. Naz. Lincei Rend. Cl. Sci. Fis. Mat. Nat. (8), 34:138–142, 1963.
  26. [26]G. Fichera. Problemi elastostatici con vincoli unilaterali: Il problema di Signorini con ambigue condizioni al contorno. Atti Accad. Naz. Lincei Mem. Cl. Sci. Fis. Mat. Natur. Sez. Ia (8), 7:91–140, 1963/64.
  27. [27]K. O. Friedrichs. On the boundary-value problems of the theory of elasticity and Korn’s inequality. Ann. of Math. (2), 48:441–471, 1947.DOI
  28. [28]J. Gobert. Une inégalité fondamentale de la théorie de l’élasticité. Bull. Soc. Roy. Sci. Liège, 31:182–191, 1962.
  29. [29]M. Hinze, R. Pinnau, M. Ulbrich, and S. Ulbrich. Optimization with PDE constraints, volume 23 of Mathematical Modelling: Theory and Applications. Springer, New York, 2009. ISBN 978-1-4020-8838-4.
  30. [30]I. Havláček and J. Nečas. On inequalities of Korn’s type. I. Boundary-value problems for elliptic system of partial differential equations. Arch. Rational Mech. Anal., 36:305–311, 1970.
  31. [31]I. Havláček and J. Nečas. On inequalities of Korn’s type. II. Applications to linear elasticity. Arch. Rational Mech. Anal., 36:312–334, 1970.
  32. [32]Y. Hou and R. Temam. About the modeling of the indentation of a virus shell: the role of the shape of the probe. J. Sci. Comput., 73(2-3):783–796, 2017.DOI
  33. [33]K. Ito and K. Kunisch. Optimal control of obstacle problems by H¹-obstacles. Appl. Math. Optim., 56 (1):1–17, 2007.DOI
  34. [34]N. Kikuchi and J. T. Oden. Contact problems in elasticity: a study of variational inequalities and finite element methods, volume 8. Society for Industrial and Applied Mathematics (SIAM), Philadelphia, PA, 1988.
  35. [35]J.-L. Lions. Quelques méthodes de résolution des problèmes aux limites non linéaires. Dunod; Gauthier-Villars, Paris, 1969.
  36. [36]J.-L. Lions. Optimal control of systems governed by partial differential equations. Die Grundlehren der mathematischen Wissenschaften, Band 170. Springer-Verlag, New York-Berlin, 1971. Translated from the French by S. K. Mitter.
  37. [37]M. Manetti. Topology, volume 153 of Unitext. Springer, Cham, 2023. Second edition [of 3287286], La Matematica per il 3+2.
  38. [38]P. Milgrom and I. Segal. Envelope theorems for arbitrary choice sets. Econometrica, 70:583–601, 2002.DOI
  39. [39]T. Mivoshi. Foundations of the numerical analysis of plasticity, volume 107 of North-Holland Mathematics Studies. North-Holland Publishing Co., Amsterdam; Kinokuniya Company Ltd., Tokyo, 1985. Lecture Notes in Numerical and Applied Analysis, 7.
  40. [40]J. Nečas and I. Havláček. Mathematical theory of elastic and elasto-plastic bodies: an introduction, volume 3 of Studies in Applied Mechanics. Elsevier Scientific Publishing Co., Amsterdam-New York, 1980.
  41. [41]J. A. Nitsche. On Korn’s second inequality. RAIRO Anal. Numér., 15(3):237–248, 1981.DOI
  42. [42]P. Piersanti. Asymptotic analysis of linearly elastic elliptic membrane shells subjected to an obstacle. J. Differential Equations, 320:114–142, 2022.arxiv.org/abs/2107.07673
  43. [43]P. Piersanti. On the justification of Koiter’s model for elliptic membrane shells subjected to an interior normal unilateral contact condition. Nonlinear Anal. Real World Appl., 88:Paper No. 104473, 25, 2026.arxiv.org/abs/2504.21637
  44. [44]P. Piersanti. Existence of solutions for time-dependent Signorini-type problems in linearised viscoelasticity. Nonlinear Anal. Real World Appl., 91:Paper No. 104570, 19, 2026.arxiv.org/abs/2504.02619
  45. [45]P. Piersanti. On the justification of Koiter’s model for generalised membrane shells of the first kind confined in a half-space. J. Math. Pures Appl. (9), 214:Paper No. 103953, 43, 2026.arxiv.org/abs/2410.16837
  46. [46]P. Piersanti, K. White, B. Dragnea, and R. Temam. Modelling virus contact mechanics under atomic force imaging conditions. Appl. Anal., 101(11):3947–3957, 2022.DOI
  47. [47]P. Piersanti, K. White, B. Dragnea, and R. Temam. A three-dimensional discrete model for approximating the deformation of a viral capsid subjected to lying over a flat surface in the static and time-dependent case. Anal. Appl. (Singap.), 20(6):1159–1191, 2022.DOI
  48. [48]A. Signorini. Sopra alcune questioni di statica dei sistemi continui. Ann. Scuola Norm. Super. Pisa Cl. Sci. (2), 2(2):231–251, 1933.
  49. [49]R. Temam. Problèmes mathématiques en plasticité, volume 12 of Méthodes Mathématiques de l’Informatique [Mathematical Methods of Information Science]. Gauthier-Villars, Montrouge, 1983.
  50. [50]W. H. Young. On Classes of Summable Functions and their Fourier Series. Proc. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci., 87(594):225–229, 1912.DOI

Paper details

vlnc:W_zn5m8vet
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Generative Predictive Text chatbots

View statement
Looking for related papers…
Contents