betaFeedback

WorksPhysics and Astronomy

Gravitational filtering, magnetic-field inhomogeneity and Coulomb collisions in a kinetic model of a plasma atmosphere with stochastic heating at its base

Abstract

We investigate the effects of stochastic heating, magnetic inhomogeneity, and Coulomb collisions in coronal loops using a reduced kinetic model. Coulomb collisions thermalize suprathermal populations generated by intermittent heating and populate velocity-space regions inaccessible from the lower boundary in the collisionless limit. We consider two regimes: when heating varies faster than the electron crossing time, the plasma develops a multitemperature nonthermal distribution; when it varies more slowly than the proton crossing time, individual heated loops approach an isothermal state. In the collisionless limit, conservation of the magnetic moment restricts the accessible velocity space, producing a strong temperature anisotropy, with parallel temperature exceeding perpendicular temperature, and additional density depletion. We find that Coulomb pitch-angle scattering efficiently suppresses these effects under typical coronal conditions. In the short-time-scale regime, density and temperature profiles approach those obtained with a constant magnetic field, while gravitational and collisional filtering sustain the temperature inversion. In the strongly collisional long-time-scale regime, magnetic-field-induced anisotropy is nearly eliminated, and individual loops remain approximately isotropic and isothermal. An increasing temperature profile then emerges only after averaging over unresolved flux tubes with different temperatures. Thus, Coulomb collisions largely suppress the macroscopic kinetic signatures of magnetic-field inhomogeneity in the transition region and low corona.

Introduction

Coronal heating and kinetic transport

The origin of the million-degree solar corona remains one of the major open questions in solar and plasma physics [1, 46, 36, 47]. Across the narrow transition region, the temperature of the solar atmosphere rises sharply from approximately 10410^4 K in the upper chromosphere to values of order 10610^6 K in the overlying corona, while the density decreases by several orders of magnitude. Understanding the physical mechanisms responsible for supplying the energy required to maintain these extreme coronal temperatures remains the central challenge of the long-standing coronal heating problem.

A broad range of physical mechanisms has been proposed to account for the high temperature of the solar corona. One class of models invokes impulsive energy release associated with magnetic reconnection, including the nanoflare scenario originally proposed by E. N. Parker [60]. In this picture, the continual stressing and reconfiguration of the coronal magnetic field lead to numerous small-scale energy-release events [37, 54, 22, 44, 73]. Another class of coronal heating models invokes the dissipation of magnetohydrodynamic waves through mechanisms such as resonant absorption and phase mixing [42, 40, 75]. Other models emphasize the development of nonlinear interactions and turbulence, driven by waves or by the continuous stressing of the magnetic field. These processes transfer energy toward smaller spatial scales, where dissipation can contribute to plasma heating [29, 23, 67, 26, 66]. The conversion of electromagnetic energy into particle energy is likely to involve processes operating at kinetic scales. Wave–particle interactions and related kinetic mechanisms can transfer energy from electromagnetic fluctuations to particles, producing heating and generating non-thermal populations and departures from Maxwellian velocity distribution functions [79, 77, 80, 53, 25, 21, 20, 78, 2, 4, 5 b]. Global magnetic models incorporating several of these physical processes have also been developed to investigate their combined role in the thermal structure of the solar atmosphere [24, 81, 9, 74, 8].

A complementary question, central to the present work, is how the resulting particle populations subsequently redistribute this deposited energy and how their kinetic transport determines the macroscopic density and temperature profiles of the solar atmosphere. This question is particularly relevant in the corona and transition region, where departures from local thermodynamic equilibrium and non-Maxwellian velocity distribution functions make a kinetic description necessary [34, 27, 49]. An important example of such a kinetic mechanism is velocity filtration or gravitational filtering. J. D. Scudder [70] proposed that, if the velocity distribution functions in the upper chromosphere possess suprathermal tails, particles with higher energies can reach greater heights in the atmosphere. The relative contribution of energetic particles therefore increases with altitude, producing an increase in kinetic temperature accompanied by a decrease in density. This anti-correlation between the density and the temperature profiles is commonly referred to as temperature inversion. Velocity filtration does not provide an additional source of energy to the corona; rather, it describes how energy already deposited in the lower atmosphere is redistributed through particle transport in a gravitationally stratified plasma. This mechanism has motivated subsequent kinetic descriptions of the solar atmosphere [55, 63, 39, 7].

Similar kinetic approaches have also been widely employed to investigate the acceleration of the solar wind, the continuous outflow of charged particles from the solar atmosphere [59]. These approaches, known as “exospheric models”, describe the evolution of particle velocity distribution functions above a prescribed reference altitude by specifying their distributions at a lower boundary and following particle trajectories under the combined influence of gravitational, ambipolar electric field and magnetic-field inhomogeneity [43, 50, 61, 51, 62, 48, 64, 65, 76] (I. Zougaenis et al. 2004).

Stochastic heating and velocity filtration

The present work shares this kinetic perspective and we consider the gravitationally stratified lower corona, where the plasma is structured by closed coronal magnetic loops (e.g. [1]). We therefore model a closed magnetic flux tube and investigate how particle transport along the loop determines its density and temperature profiles. In a series of recent studies (L. Barbieri et al. 2024a,b; L. Barbieri et al. 2025a,b; L. Barbieri & P. Démoulin 2025; L. Barbieri et al. 2026a,b,c), we investigate this problem by connecting velocity filtration with intermittent energy deposition in the lower atmosphere. Observations reveal a large number of transient brightenings and energy-release events occurring over a broad range of spatial and temporal scales (see [82, 58, 38] and references therein). A key difference with previous kinetic approaches is the origin of the particle distribution function at the lower boundary. While velocity-filtration models of the lower solar atmosphere prescribe the boundary distribution function (J. D. Scudder 1992a,b; N. Meyer-Vernet 2007; V. Pierrard & M. Pieters 2014; L.-N. Hau et al. 2025), our approach derives it from the statistics of stochastic heating events. Heating events characterized by different intensities generate particle populations at different temperatures, whose superposition produces non-Maxwellian distributions with a suprathermal tails. The subsequent gravitational filtering of these populations then generates a transition from chromospheric to coronal temperatures.

Two different regimes arise depending on the characteristic time scales of the stochastic heating. When both the heating duration and the waiting time between successive heating events are shorter than the electron crossing time, populations generated at different temperatures coexist within the same flux tube. The resulting multi-temperature distribution remains out of thermal equilibrium, and gravitational filtering produces temperature inversion. In contrast, when the heating time scale is comparable to or longer than the proton crossing time, each heated flux tube has sufficient time to relax toward an approximately isothermal configuration. In this long-time-scale regime, the temperature inversion does not develop within an individual loop, but emerges after coarse graining of the surface over unresolved flux tubes characterized by different temperatures [13]. The role of Coulomb collisions in these two regimes is investigated by L. Barbieri et al. [14]. In the short-time-scale regime, collisions progressively thermalize the suprathermal populations generated by the stochastic heating events. Dynamical friction and velocity-space diffusion reduce the fraction of energetic particles capable of reaching coronal heights, modifying the density profile while preserving the qualitative temperature inversion. In the long-time-scale regime, by contrast, individual heated columns are already close to thermal equilibrium and are highly collisional. Coulomb collisions therefore produce only minor modifications of the approximately isothermal profiles of each heated flux tube. The temperature inversion obtained after surface coarse graining consequently remains unchanged.

Magnetic field inhomogeneity and scope of the present work

These previous models, however, consider flux tubes with constant cross section. The magnetic field of the solar atmosphere is inherently inhomogeneous, and magnetic flux tubes generally expand with height as the magnetic-field strength decreases away from their photospheric footpoints [35, 33, 72, 28, 52, 45]. In a magnetized plasma, this expansion introduces an additional kinetic effect through conservation of the magnetic moment. In our recent collisionless treatment of an expanding flux tube [16], we show that the conservation of particle energy and magnetic moment, together with the boundary connectivity condition, restricts the region of local velocity space populated by particles originating from the lower boundary. This pitch-angle-dependent restriction leads to a density depletion and a pronounced temperature anisotropy, with parallel and perpendicular temperatures shaping differently with height. These effects persist for both single-temperature and multi-temperature boundary distributions and can substantially modify the thermodynamic profiles predicted by gravitational filtering alone.

However, the collisionless approximation leaves open an important question. The same Coulomb collisions that thermalize suprathermal populations also scatter particles in pitch angle and therefore redistribute particles across the boundary separating the regions of velocity space that are connected and disconnected from the lower boundary in the collisionless mapping. Magnetic field inhomogeneity and Coulomb collisions thus act in competing directions: conservation of the magnetic moment tends to generate velocity-space anisotropy, whereas collisional scattering tends to isotropize the distribution and populate velocity-space regions that are inaccessible through collisionless transport alone. Whether the signatures of magnetic field inhomogeneity survive under the collisional conditions relevant to the transition region and low corona therefore cannot be established from either of our previous limiting models. The purpose of the present work is to address this problem by combining gravitational filtering, magnetic-field inhomogeneity and Coulomb collisions with stochastic heating at the base of the transition.

The paper is structured as follows. § 2 introduces the physical model and the basic equations. § 3 develops the short-time-scale regime and investigates the interplay between stochastic heating, magnetic field inhomogeneity, and Coulomb collisions. § 4 considers the long-time-scale regime. Finally, § 5 summarizes the main results and outlines the limitations and future developments of the model.

Model overview

We consider a plasma atmosphere composed of electrons and protons that is globally at rest. The atmosphere is embedded in a closed, loop-like magnetic field. We further assume a symmetric magnetic loop, with equal plasma pressure at both footpoints, so that no net mass flow develops along the loop. The particle dynamics is described along the axis of a thin magnetic flux tube. We introduce the curvilinear coordinate ss, measured along the magnetic-field line, and write the magnetic field as

B(s)=B(s)b(s),(1)\mathbf{B}(s) = B(s)\mathbf{b}(s), \tag*{(1)}

where b(s)\mathbf{b}(s) is the unit vector tangent to the magnetic-field line. The magnetic-field strength B(s)B(s) is assumed to decrease monotonically from the loop footpoint along the portion of the flux tube considered here. Each particle is subjected to gravity,

Fg,α=mαg,α∈{e,p},(2)\mathbf{F}_{g,\alpha}=m_{\alpha}\mathbf{g},\qquad\alpha\in\{e,p\}, \tag*{(2)}

where g\mathbf{g} is the gravitational acceleration at the solar surface, while mem_e and mpm_p denote the electron and proton masses. The plasma is also subjected to the Pannekoek–Rosseland electric field [57, 69, 56, 10],

EPR=−mp−me2eg.(3)\mathbf{E}_{\mathrm{PR}}=-\frac{m_p-m_e}{2e}\mathbf{g}. \tag*{(3)}

Under these assumptions the total force acting on a particle of species α\alpha is therefore

Fα=m‾g+eαcv×B(s)withm‾=me+mp2,(4)\mathbf{F}_{\alpha}=\overline{m}\mathbf{g}+\frac{e_{\alpha}}{c}\mathbf{v}\times\mathbf{B}(s) \qquad\text{with}\qquad \overline{m}=\frac{m_e+m_p}{2}, \tag*{(4)}

where eα=ee_{\alpha}=e for protons, eα=−ee_{\alpha}=-e for electrons and cc is the speed of light. Since the dynamics is described along a curved magnetic-field line, the component of the total force along the flux tube is described by the corresponding potential energy ϕ(s)\phi(s) through

−dϕds=Fα,∥(s)=m‾g⋅b(s).(5)-\frac{\mathrm{d}\phi}{\mathrm{d}s}=F_{\alpha,\parallel}(s)=\overline{m}\mathbf{g}\cdot\mathbf{b}(s). \tag*{(5)}

The corresponding single-particle Hamiltonian is

Hα(s,v)=12m‾v2+ϕ(s).(6)H_{\alpha}(s,\mathbf{v})=\frac{1}{2}\overline{m}v^{2}+\phi(s). \tag*{(6)}

In the following, the equations apply to both protons and electrons upon specifying the corresponding particle properties. For conciseness, we omit the species index α\alpha.

Fast time-scale regime

We now extend the collisional model introduced by L. Barbieri et al. [14] for a constant-cross-section magnetic flux tube to the expanding geometry considered here. As in the collisionless model L. Barbieri et al. [16], conservation of particle energy and magnetic moment divides the local velocity space into regions that are connected and disconnected from the lower boundary through collisionless Liouville mapping. Coulomb collisions are incorporated through a reduced closure accounting for two effects: the progressive attenuation of the suprathermal populations and the collisional filling of the disconnected velocity-space region through pitch-angle scattering. These processes are described by the functions ω(T,s)\omega(T,s) and R(T,s)R(T,s) as detailed below.

Boundary conditions

At the lower boundary of the magnetic flux tube, s=0s=0, the plasma is assumed to be in thermal contact with the upper chromosphere, which is modelled as a thermal boundary. In the absence of heating, particles are injected with a Maxwellian distribution at the background temperature T0=104KT_0=10^4\mathrm{K}. Following L. Barbieri et al. [14], we assume that the temperature of the boundary undergoes stochastic fluctuations associated with intermittent heating events. During a heating event of characteristic duration τ\tau, the boundary temperature increases from T0T_0 to a temperature T>T0T>T_0, drawn from a probability distribution γ(T)\gamma(T). After the heating phase, the boundary returns to the background temperature T0T_0 for a characteristic waiting time twt_w, after which a new heating event occurs. Presently, we restrict the analysis to the short-time-scale regime introduced in L. Barbieri et al. [11] as

τ,tw<tc,e,(7)\tau,t_w<t_{c,e}, \tag*{(7)}

where tc,et_{c,e} is the characteristic electron crossing time along the magnetic loop. In this regime, the boundary temperature fluctuates on time scales shorter than those required for particles to cross the entire system. Particle populations generated during successive heating and cooling phases therefore coexist and mix and the system reaches a non-thermal stationary state. The resulting stationary distribution function at the lower boundary can be written as

f(0,v)=N[At∫T0+∞dT γ(T)T3/2exp⁡(−mv22kBT)+1−AtT03/2exp⁡(−mv22kBT0)].(8)f(0,\mathbf{v})=N\left[A_t\int_{T_0}^{+\infty}\mathrm{d}T\,\frac{\gamma(T)}{T^{3/2}}\exp\left(-\frac{mv^2}{2k_{\mathrm{B}}T}\right)+\frac{1-A_t}{T_0^{3/2}}\exp\left(-\frac{mv^2}{2k_{\mathrm{B}}T_0}\right)\right]. \tag*{(8)}

where

At=ττ+tw.(9)A_t=\frac{\tau}{\tau+t_w}. \tag*{(9)}

is the fraction of time during which heating is active. The function γ(T)\gamma(T) is the probability density of the temperatures reached during the heating phases, normalized such that

∫T0+∞γ(T) dT=1.(10)\int_{T_0}^{+\infty} \gamma(T)\,\mathrm{d}T = 1. \tag*{(10)}

The normalization constant NN is determined by requiring the density of each species at the lower boundary to be equal to n0n_0. Therefore,

N=n0(m2πkB)3/2.(11)N = n_0 \left(\frac{m}{2\pi k_{\mathrm{B}}}\right)^{3/2}. \tag*{(11)}

Equation (8) consists of a cold Maxwellian population at the chromospheric temperature T0T_0, with relative weight 1−At1-A_t, and a suprathermal component produced by stochastic heating, represented by a continuous superposition of Maxwellian populations at T>T0T>T_0 with total relative weight AtA_t. The latter provides the suprathermal population that is subsequently modified by gravitational filtering, magnetic field inhomogeneity, and Coulomb collisions as particles propagate along the flux tube. As discussed by L. Barbieri et al. [14], describing each individual heating event by a Maxwellian distribution is a conservative approximation. In the short-time-scale regime, the duration of the heating events may be comparable to, or shorter than, the local collisional relaxation time at the base of the transition region, so that complete thermalization at the boundary is not necessarily achieved. More realistic heating mechanisms could generate intrinsically non-Maxwellian distributions with enhanced suprathermal tails. The Maxwellian assumption adopted here minimizes this non-thermal contribution.

Passing and trapped velocity-space domain

As discussed in the collisionless model by L. Barbieri et al. [16], as well as in exospheric models of the solar wind [43, 50, 61, 51, 62, 48, 84, 64, 65, 76], conservation of the single-particle energy and magnetic moment divides the local velocity space into a domain directly connected to the lower boundary and a complementary trapped region. We define the characteristic function χ(s,v)\chi(s,v) with χ=1\chi=1 for trajectories that can be mapped collisionlessly to the lower boundary and χ=0\chi=0 otherwise. We recall the quantities defining the boundary between the two velocity-space domains. We introduce

c(s)=B(0)−B(s)B(0),(12)c(s) = \sqrt{\frac{B(0)-B(s)}{B(0)}}, \tag*{(12)}

which measures the magnetic field inhomogeneity between the lower boundary and the position ss. The critical velocity separating the two angular regimes is

vB2(s)=B(s)B(0)−B(s)2ϕ(s)m.(13)v_{\mathrm{B}}^2(s) = \frac{B(s)}{B(0)-B(s)}\frac{2\phi(s)}{m}. \tag*{(13)}

with ϕ(s)\phi(s) computed by integration of Equation (5). It is also convenient to introduce the dimensionless quantity

a2(T,s)=mvB2(s)2kBT.(14)a^2(T,s) = \frac{m v_{\mathrm{B}}^2(s)}{2 k_{\mathrm{B}} T}. \tag*{(14)}

The parameter aa expresses the critical velocity vBv_{\mathrm{B}} in units of the thermal velocity of the Maxwellian population generated at temperature TT. For v≤vB(s)v\leq v_{\mathrm{B}}(s), all pitch angles belong to the velocity-space domain connected to the lower boundary. For v>vB(s)v>v_{\mathrm{B}}(s), instead, only particles satisfying

∣θ∣≤θm(s,v)(15)|\theta| \leq\theta_m(s,v) \tag*{(15)}

remain collisionlessly connected to the lower boundary, where the limiting pitch angle is defined by

cos⁡θm(s,v)=c(s)v2−vB2(s)v.(16)\cos\theta_m(s,v) = c(s)\frac{\sqrt{v^2-v_{\mathrm{B}}^2(s)}}{v}. \tag*{(16)}

Therefore the characteristic function χ\chi is given

χ(z,v)={1,v≤vB(z),1,v>vB(z), ∣θ∣≤θm(z,v),0,v>vB(z), ∣θ∣>θm(z,v).(17)\chi(z,v) = \begin{cases} 1, & v \leq v_{\mathrm{B}}(z),\\ 1, & v > v_{\mathrm{B}}(z),\ |\theta| \leq\theta_m(z,v),\\ 0, & v > v_{\mathrm{B}}(z),\ |\theta| > \theta_m(z,v). \end{cases} \tag*{(17)}

Collisional distribution function

We decompose the collisional distribution function ff into a multitemperature suprathermal component fHf_{\mathrm{H}} and a Maxwellian core fMf_{\mathrm{M}},

f=fH+fM.(18)f = f_{\mathrm{H}} + f_{\mathrm{M}} . \tag*{(18)}

Suprathermal component and collisional filtering

With the boundary conditions set by Equation (8), the suprathermal contribution is written as

fH(s,v)=NAt∫T0+∞dT γ(T) ω(T,s)T3/2exp⁡[−H(s,v)kBT][χ(s,v)+(1−R(T,s))(1−χ(s,v))].(19)f_{\mathrm{H}}(s,\mathbf{v}) = N A_t \int_{T_0}^{+\infty} \mathrm{d}T \, \frac{\gamma(T)\,\omega(T,s)}{T^{3/2}} \exp\left[-\frac{H(s,\mathbf{v})}{k_{\mathrm{B}}T}\right] \left[\chi(s,\mathbf{v}) + (1-R(T,s))(1-\chi(s,\mathbf{v}))\right] . \tag*{(19)}

Here, ω(T,s)\omega(T,s) and R(T,s)R(T,s) are two collisional factors. We describe ω(T,s)\omega(T,s) in this subsection and then R(T,s)R(T,s) in subsection 3.3.2. The factor ω(T,s)\omega(T,s) describes the progressive attenuation, due to Coulomb collisions, of the contribution associated with the Maxwellian population initially injected at temperature TT at the lower boundary. Its evolution along the field line is modelled by

∂ω(T,s)∂s=−ω(T,s)λ(T,s),(20)\frac{\partial\omega(T,s)}{\partial s} = -\frac{\omega(T,s)}{\lambda(T,s)} , \tag*{(20)}

where λ(T,s)\lambda(T,s) is the collisional mean free path of the population at temperature TT. ω(T,0)=1\omega(T,0)=1 is the boundary condition at s=0s=0. Equation (20) was derived from the kinetic transport arguments presented in detail in L. Barbieri et al. [14]. Although that study considered a flux tube with constant cross section, the derivation of this evolution equation does not rely on that geometrical assumption. We therefore retain the same evolution equation in the present model, while evaluating the mean free path λ(T,s)\lambda(T,s) self-consistently from the moments of the distribution function, taking into account the local plasma conditions and the expanding magnetic-field geometry (see § 3.5 below).

Thus, ω(T,s)\omega(T,s) represents the surviving fraction of the original population associated with temperature TT after collisional processing. Populations characterized by a short mean free path are rapidly attenuated by Coulomb collisions, whereas those with a sufficiently long mean free path are less affected by collisional relaxation and remain approximately described by the collisionless mapping of the distribution prescribed at the lower boundary. This attenuation does not represent a loss of particles from the system. Rather, particles removed from the suprathermal population by collisions are incorporated into the Maxwellian core (see § 3.5 below).

Collisional filling of the trapped domain

The second collisional factor appearing in Equation (19) is R(T,s)R(T,s), which describes the progressive filling, as a function of ss, of the velocity-space domain that is not collisionlessly connected to the lower boundary. Coulomb collisions, however, redistribute particles in velocity space and transfer particles from the connected domain into the otherwise inaccessible domain. We therefore introduce the factor 1−R(T,s)1-R(T,s) as a measure of its degree of filling: R=1R=1 corresponds to the collisionless limit, in which this domain is empty, whereas R=0R=0 corresponds to complete filling with the Maxwellian population at temperature TT. In the present model, we assume that the collisional filling of the disconnected velocity-space domain occurs over the same collisional length λ(T,s)\lambda(T,s) introduced above for the survival factor ω(T,s)\omega(T,s). Accordingly, R(T,s)R(T,s) obeys

∂R(T,s)∂s=−R(T,s)λ(T,s),R(T,0)=1.(21)\frac{\partial R(T,s)}{\partial s} = -\frac{R(T,s)}{\lambda(T,s)}, \qquad R(T,0)=1. \tag*{(21)}

The boundary condition R(T,0)=1R(T,0)=1 follows from the injection condition at the lower boundary. At s=0s=0, c(0)=0c(0)=0, so that the disconnected velocity-space domain has zero volume and χ=1\chi=1 everywhere. Thus, R(T,0)=1R(T,0)=1 specifies that no collisional filling of a disconnected domain has yet accumulated for the population at the point of injection. Although Equation (21) has the same mathematical form as Equation (20), the two factors have distinct physical meanings, as discussed above. Unlike the evolution equation for ω(T,s)\omega(T,s), which was derived in L. Barbieri et al. [14], adopting the same equation for R(T,s)R(T,s) is a phenomenological assumption introduced to describe the collisional filling of the trapped velocity-space domain by particles associated with different temperature components. Within this prescription, hotter components, characterized by longer mean free paths, tend to retain the collisionless boundary-connected distribution, whereas colder components undergo stronger collisional redistribution, leading to fill more the trapped domain. The limitations of this assumption are discussed in § 5.

Maxwellian core

The particles removed from the suprathermal populations through collisional thermalization are transferred to the Maxwellian core, whose distribution function is

fM(s,v)=NC(s)TM3/2(s)exp⁡[−H(s,v)kBTM(s)][χ(s,v)+(1−RM(s))(1−χ(s,v))].(22)f_M(\mathbf{s},\mathbf{v}) = N \frac{C(s)}{T_M^{3/2}(s)} \exp\left[-\frac{H(\mathbf{s},\mathbf{v})}{k_{\mathrm{B}}T_M(s)}\right]\left[\chi(\mathbf{s},\mathbf{v}) + (1-R_M(s))(1-\chi(\mathbf{s},\mathbf{v}))\right]. \tag*{(22)}

Here, C(s)C(s) determines the amplitude of the Maxwellian core, TM(s)T_M(s) its temperature, and RM(s)R_M(s) describes the collisional filling of the velocity-space domain that is disconnected from the lower boundary through collisionless trajectories. At the lower boundary, the core must recover the Maxwellian component of the prescribed distribution in Equation (8). We therefore impose

TM(0)=T0,C(0)=1−At.(23)T_M(0) = T_0,\qquad C(0) = 1-A_t. \tag*{(23)}

At s=0s=0, the collisionless disconnected velocity-space domain has zero volume and χ=1\chi=1. The core distribution therefore reduces to

fM(0,v)=N1−AtT03/2exp⁡[−mv22kBT0],(24)f_M(0,\mathbf{v}) = N\frac{1-A_t}{T_0^{3/2}}\exp\left[-\frac{m v^2}{2k_{\mathrm{B}}T_0}\right], \tag*{(24)}

which is the Maxwellian contribution prescribed in Equation (8). As height increases, collisions between core and suprathermal particles result in the exchange of particles and energy between the two populations, thereby modifying the core amplitude C(s)C(s) and its characteristic temperature TM(s)T_M(s) from their respective values at the base, 1−At1-A_t and T0T_0. The collisional filling of the disconnected velocity-space domain is described for the Maxwellian core using the same reduced prescription adopted for the each temperature contribution in the suprathermal population. Therefore, the corresponding RM(s)R_M(s) obeys

∂RM(s)∂s=−RM(s)λ(TM(s),s),RM(0)=1,(25)\frac{\partial R_M(s)}{\partial s}=-\frac{R_M(s)}{\lambda(T_M(s),s)},\qquad R_M(0)=1, \tag*{(25)}

and the same physical considerations discussed for R(T,s)R(T,s) in § 3.3.2 also apply to RM(s)R_M(s).

Velocity moments

We obtain the kinetic moments of the collisional distribution function defined in Equation (18) by integrating separately the suprathermal and Maxwellian-core components over velocity space. The velocity integrals involve the collisionlessly connected and trapped domains introduced in § 3.2. The detailed procedure for calculating the contribution from the collisionlessly connected domain is analogous to that presented by L. Barbieri et al. [16]. The same procedure can be applied to the trapped domain by performing the integration over the complementary region of phase space. The number density of the complete distribution is

n(s)=n0[At∫T0+∞dT γ(T) ω(T,s)e−ϕ(s)/(kBT)G∗(T,s)+C(s)e−ϕ(s)/[kBTM(s)]G∗,M(s)].(26)n(s)=n_0\left[A_t\int_{T_0}^{+\infty}\mathrm{d}T\,\gamma(T)\,\omega(T,s)e^{-\phi(s)/(k_{\mathrm{B}}T)}G_*(T,s)+C(s)e^{-\phi(s)/[k_{\mathrm{B}}T_M(s)]}G_{*,M}(s)\right]. \tag*{(26)}

The parallel and perpendicular pressures are

pi(s)=n0kB[At∫T0+∞dT Tγ(T) ω(T,s)e−ϕ(s)/(kBT)Gi(T,s)+C(s)TM(s)e−ϕ(s)/[kBTM(s)]Gi,M(s)],i∈{∥,⊥}.(27)p_i(s)=n_0k_{\mathrm{B}}\left[A_t\int_{T_0}^{+\infty}\mathrm{d}T\,T\gamma(T)\,\omega(T,s)e^{-\phi(s)/(k_{\mathrm{B}}T)}G_i(T,s)+C(s)T_M(s)e^{-\phi(s)/[k_{\mathrm{B}}T_M(s)]}G_{i,M}(s)\right],\qquad i\in\{\parallel,\perp\}. \tag*{(27)}

The corresponding parallel and perpendicular temperatures are

Ti(s)=pi(s)kBn(s),i∈{∥,⊥},(28)T_i(s)=\frac{p_i(s)}{k_{\mathrm{B}}n(s)},\qquad i\in\{\parallel,\perp\}, \tag*{(28)}

and the total temperature is

T(s)=T∥(s)+2T⊥(s)3.(29)T(s)=\frac{T_{\parallel}(s)+2T_{\perp}(s)}{3}. \tag*{(29)}

The dimensionless factors G∗G_*, G∥G_{\parallel} and G⊥G_{\perp} appearing in the density and pressure expressions account for the contributions of both the collisionlessly connected and trapped populations to the corresponding velocity moments. Since the trapped population is filled according to the factor 1−R(T,s)1-R(T,s), these complete geometrical factors are given by

Gi(T,s)=Gi(T,s)+[1−R(T,s)][1−Gi(T,s)]=1−R(T,s)[1−Gi(T,s)],i∈{∗,∥,⊥}.(30)G_i(T,s)=G_i(T,s)+[1-R(T,s)][1-G_i(T,s)]=1-R(T,s)[1-G_i(T,s)],\qquad i\in\{*,\parallel,\perp\}. \tag*{(30)}

Here, G∗G_{*}, G∥G_{\parallel}, and G⊥G_{\perp} denote, respectively, the normalized density, parallel-pressure, and perpendicular-pressure contributions of the collisionlessly connected population [16]. Their explicit expressions are

G∗(T,s)=1−c(s)e−a2,(31)G_{*}(T,s)=1-c(s)e^{-a^{2}}, \tag*{(31)}
G∥(T,s)=1−c3(s)e−a2,(32)G_{\parallel}(T,s)=1-c^{3}(s)e^{-a^{2}}, \tag*{(32)}
G⊥(T,s)=1−c(s)[32+a2]e−a2+c3(s)2e−a2,(33)G_{\perp}(T,s)=1-c(s)\left[\frac{3}{2}+a^{2}\right]e^{-a^{2}}+\frac{c^{3}(s)}{2}e^{-a^{2}}, \tag*{(33)}

where c(s)c(s) and a2=a2(T,s)a^{2}=a^{2}(T,s) are defined in Equations (12) and (14), respectively. For the Maxwellian core, the corresponding geometrical factors are obtained by evaluating the same expressions at the local core temperature TM(s)T_{\mathrm{M}}(s), with the trapped population filled according to the factor 1−RM(s)1-R_{\mathrm{M}}(s). The resulting complete core factors are denoted by G∗,MG_{*,\mathrm{M}}, G∥,MG_{\parallel,\mathrm{M}}, and G⊥,MG_{\perp,\mathrm{M}}. The limiting behaviour of these factors provides a direct connection between the collisionless and fully populated velocity-space configurations. In the collisionless limit, R→1R\to1, Gi→GiG_{i}\to G_{i}, and only the population collisionlessly connected to the lower boundary contributes to the moments. Conversely, in the limit of complete filling of the trapped domain, R→0R\to0, Gi→1G_{i}\to1, and the full local Maxwellian moments are recovered.

Collisional mean free path

The evolution of the collisional factors, G∗G_{*}, G∥G_{\parallel}, and G⊥G_{\perp}, introduced above is controlled by the mean free path λ(T,s)\lambda(T,s). Since the collision rate depends on both the characteristic particle velocity and the local plasma state, λ(T,s)\lambda(T,s) generally depends on the distribution function itself. Following the prescription adopted in our constant-cross-section collisional model [14], the mean free path associated with the Maxwellian population generated at temperature TT is

λ(T,s)=m2[⟨v∥2⟩T+2⟨v⊥2⟩T]24πe4n(s)ln⁡Λ(T,s).(34)\lambda(T,s)=\frac{m^{2}\left[\left\langle v_{\parallel}^{2}\right\rangle_{T}+2\left\langle v_{\perp}^{2}\right\rangle_{T}\right]^{2}}{4\pi e^{4}n(s)\ln\Lambda(T,s)}. \tag*{(34)}

Here, v⊥v_{\perp} denotes one of the two perpendicular velocity components. The factor of 2 in Equation (34) accounts for the two perpendicular degrees of freedom. The velocity moments are evaluated over the actual velocity-space population associated with temperature TT. Using the geometric factors introduced above, we write

⟨vi2⟩T=kBTmGi(T,s)G∗(T,s),i∈{∥,⊥}.(35)\left\langle v_{i}^{2}\right\rangle_{T}=\frac{k_{\mathrm{B}}T}{m}\frac{G_{i}(T,s)}{G_{*}(T,s)},\qquad i\in\{\parallel,\perp\}. \tag*{(35)}

The Coulomb logarithm is evaluated using the local density and temperature of the complete plasma distribution

ln⁡Λ(T,s)=ln⁡[3kBT2e2kBT(s)4πe2n(s)].(36)\ln\Lambda(T,s)=\ln\left[\frac{3k_{\mathrm{B}}T}{2e^{2}}\sqrt{\frac{k_{\mathrm{B}}T(s)}{4\pi e^{2}n(s)}}\right]. \tag*{(36)}

The dependence of the mean-free-path on the geometric factors G∗G_{*}, G∥G_{\parallel}, and G⊥G_{\perp} incorporates the modification of the velocity moments produced by the inhomogeneous magnetic geometry and by the collisional filling of the trapped velocity-space domain.

Evolution of the Maxwellian-core amplitude

As in the constant-cross-section model of L. Barbieri et al. [14], the amplitude C(s)C(s) of the Maxwellian core is determined by imposing local particle conservation during the collisional redistribution over a small distance δs\delta s. We therefore impose

δn(s)δs∣coll≈dn(s)ds∣coll=0,(37)\left.\frac{\delta n(s)}{\delta s}\right|_{\mathrm{coll}}\approx\left.\frac{dn(s)}{ds}\right|_{\mathrm{coll}}=0, \tag*{(37)}

where the subscript “coll” indicates that only the variation induced by collisional redistribution is considered. The local macroscopic plasma quantities and magnetic geometry are assumed to remain constant. In particular, exponential factors associated with gravitational stratification are treated as constant, since the characteristic length scale considered here is the Debye length, which is much smaller than the gravitational scale height. The collisionless geometrical factors Gi(T,s)G_{i}(T,s) are also held fixed, whereas the functions describing collisional effects, namely ω(T,s)\omega(T,s), R(T,s)R(T,s), RM(s)R_{\mathrm{M}}(s), and C(s)C(s), are allowed to vary. This local approximation relies on the separation between the microscopic length scale considered here and the macroscopic scales over which the plasma properties and magnetic geometry evolve. Using Equation (26), with the definition of G∗(T,s)G_{*}(T,s) given by Equation (30), the corresponding density variation is

dn(s)ds∣coll=At∫T0+∞dT γ(T)e−ϕ/(kBT)[G∗(T,s)∂ω(T,s)∂s−ω(T,s)[1−G∗(T,s)]∂R(T,s)∂s+e−ϕ/[kBTM(s)][G∗,M(s)dC(s)ds−C(s)[1−G∗,M(s)]dRM(s)ds]].(38)\left.\frac{dn(s)}{ds}\right|_{\mathrm{coll}} = A_{\mathrm{t}} \int_{T_{0}}^{+\infty} dT\,\gamma(T)e^{-\phi/(k_{\mathrm{B}}T)}\left[G_{*}(T,s)\frac{\partial\omega(T,s)}{\partial s}-\omega(T,s)\left[1-G_{*}(T,s)\right]\frac{\partial R(T,s)}{\partial s}\right. \\ \left.{}+e^{-\phi/[k_{\mathrm{B}}T_{M}(s)]}\left[G_{*,M}(s)\frac{dC(s)}{ds}-C(s)\left[1-G_{*,M}(s)\right]\frac{dR_{M}(s)}{ds}\right]\right]. \tag*{(38)}

Imposing Equation (37) together with Eqs. (20),(21),(25) we get

dCds=Ate−ϕ(s)/[kBTM(s)]G∗,M(s)∫T0+∞dT γ(T)e−ϕ(s)/(kBT)ω(T,s)[G∗(T,s)λ(T,s)−R(T,s)[1−G∗(T,s)]λ(T,s)]−C(s)RM(s)[1−G∗,M(s)]G∗,M(s)λM(s).(39)\frac{dC}{ds}=\frac{A_{\mathrm{t}}}{e^{-\phi(s)/[k_{\mathrm{B}}T_{M}(s)]}G_{*,M}(s)}\int_{T_{0}}^{+\infty}dT\,\gamma(T)e^{-\phi(s)/(k_{\mathrm{B}}T)}\omega(T,s)\left[\frac{G_{*}(T,s)}{\lambda(T,s)}-\frac{R(T,s)\left[1-G_{*}(T,s)\right]}{\lambda(T,s)}\right] \\ {}-\frac{C(s)R_{M}(s)\left[1-G_{*,M}(s)\right]}{G_{*,M}(s)\lambda_{M}(s)}. \tag*{(39)}

Equation (39) expresses local particle conservation during the collisional redistribution and makes explicit the coupling between collisional filtering, trapped-domain filling, and the evolution of the Maxwellian-core amplitude CC. A detailed description of each term in Eq. (39) is provided in Appendix § 7.§ 1.

Evolution of the Maxwellian-core temperature

The Maxwellian-core temperature TM(s)T_{M}(s) is determined by requiring the complete particle distribution to satisfy stationary momentum balance along the magnetic flux tube. Since the velocity distribution is anisotropic but gyrotropic, its pressure tensor is

P=p⊥I+(p∥−p⊥)b⊗b.(40)\mathbf{P}=p_{\perp}\mathbf{I}+\left(p_{\parallel}-p_{\perp}\right)\mathbf{b}\otimes\mathbf{b}. \tag*{(40)}

In the absence of a bulk flow, the stationary momentum equation is

∇⋅P+n∇ϕ=0.(41)\nabla\cdot\mathbf{P}+n\nabla\phi=0. \tag*{(41)}

Projecting this equation along the magnetic-field direction and using Maxwell’s equation ∇⋅B=0\nabla\cdot\mathbf{B}=0, we obtain

dp∥ds−(p∥−p⊥)dln⁡Bds=−n(s)dϕds.(42)\frac{dp_{\parallel}}{ds}-\left(p_{\parallel}-p_{\perp}\right)\frac{d\ln B}{ds}=-n(s)\frac{d\phi}{ds}. \tag*{(42)}

The first term in Equation (42) describes the variation of the parallel pressure along the flux tube, whereas the right-hand side represents the force density associated with the combined gravitational and Pannekoek potential. The additional term, proportional to p∥−p⊥p_{\parallel}-p_{\perp}, arises from the coupling between pressure anisotropy and magnetic-field inhomogeneity. It vanishes when the pressure is isotropic (p∥=p⊥p_{\parallel}=p_{\perp}) or when the magnetic-field strength is constant along the flux tube. Substituting Equations (26)–(27) into Equation (42), differentiating the parallel pressure, and isolating dTM/dsdT_{M}/ds, we obtain

dTMds={−AtdH∥ds−1kBdϕds(AtH∗+CEMG∗,M)+ΔPdln⁡Bds−dCdsTMEMG∥,M−CTMEM[dG∥,Mds∣TM−G∥,MkBTMdϕds]}{CEM[G∥,M(1+ϕkBTM)+TMdG∥,MdTM]}−1.(43)\frac{dT_{M}}{ds}=\left\{-A_{\mathrm{t}}\frac{d\mathcal{H}_{\parallel}}{ds}-\frac{1}{k_{\mathrm{B}}}\frac{d\phi}{ds}\left(A_{\mathrm{t}}\mathcal{H}_{*}+C E_{M}G_{*,M}\right)+\Delta P\frac{d\ln B}{ds}-\frac{dC}{ds}T_{M}E_{M}G_{\parallel,M} \right. \\ \left. {}-CT_{M}E_{M}\left[\left.\frac{dG_{\parallel,M}}{ds}\right|_{T_{M}}-\frac{G_{\parallel,M}}{k_{\mathrm{B}}T_{M}}\frac{d\phi}{ds}\right]\right\} \left\{C E_{M}\left[G_{\parallel,M}\left(1+\frac{\phi}{k_{\mathrm{B}}T_{M}}\right)+T_{M}\frac{dG_{\parallel,M}}{dT_{M}}\right]\right\}^{-1}. \tag*{(43)}

The terms involved in Equation (43) are analysed in Appendix § 7.§ 2. In the isotropic limit, ΔP→0\Delta P\to0, the mirror-force contribution disappears. In the constant-cross-section limit, dB/ds→0dB/ds\to0 the geometrical terms also vanish and the equation reduces to the constant-cross-section collisional formulation of L. Barbieri et al. [14]. Equations (20), (39), and (43) form a closed nonlinear integro-differential system. The numerical integration follows the strategy introduced by L. Barbieri et al. [14]. We integrate the system along the curvilinear coordinate ss using an adaptive implicit algorithm, while all local plasma quantities and collisional mean free paths are recomputed self-consistently at each integration step. For further details on the numerical scheme, see Appendix § 8.

Density and temperature profiles

Magnetic-field geometry and stochastic-heating distribution

We now illustrate the density and temperature profiles for a representative inhomogeneous magnetic field. While the framework developed above is formulated in terms of the general curvilinear coordinate ss along the magnetic field, for the numerical examples presented in this subsection, we simplify our configuration to a vertical magnetic field and identify s=zs = z. This simplification follows the approach adopted in our previous collisionless treatment [16]. It is appropriate for the nearly vertical legs of sufficiently large magnetic loops and avoids introducing additional geometrical effects associated with the curvature of the field line. The purpose of the present calculation is therefore not to model the complete geometry of a closed magnetic loop, but to isolate the effects of magnetic-field inhomogeneity and Coulomb collisions on the vertical density and temperature profiles. Within this geometry, Equation (5) reduces to

dϕdz=mˉg,(44)\frac{d\phi}{dz} = \bar{m}g, \tag*{(44)}

where gg is taken to be constant over the spatial domain considered. Choosing ϕ(0)=0\phi(0) = 0, the potential therefore takes the standard linear form

ϕ(z)=mˉgz.(45)\phi(z) = \bar{m}gz. \tag*{(45)}

For consistency with the collisionless analysis of L. Barbieri et al. [16], we adopt the same monotonically decreasing magnetic-field profile,

B(z)=B0d2z2+d2,(46)B(z) = B_0 \frac{d^2}{z^2+d^2}, \tag*{(46)}

where B0=B(0)B_0 = B(0) is the magnetic-field strength at the lower boundary and dd determines the characteristic spatial scale of the magnetic-field inhomogeneity. Magnetic-field extrapolations show that elementary flux tubes generally expand with height as the field strength decreases away from the photospheric footpoints. In particular, the comparison performed by P. Démoulin et al. [28] between observed coronal loops and magnetic flux tubes reconstructed from field extrapolations showed that the latter exhibit a systematic expansion with height, although the predicted expansion is generally stronger than that inferred from the observed loop widths. The profile in Equation (46) is not intended to reproduce the detailed magnetic structure of an individual coronal loop, but rather to provide a smooth and analytically tractable model of this generic expansion. To specify the stochastic heating at the lower boundary, we adopt the same distribution of heating-event temperatures used in our previous work [14 c]. The probability density for an event to heat the plasma to a temperature TT is taken to be

γ(T)=1ΔTexp⁡(−T−T0ΔT),T>T0,(47)\gamma(T) = \frac{1}{\Delta T}\exp\left(-\frac{T-T_0}{\Delta T}\right), \qquad T > T_0, \tag*{(47)}

where ΔT\Delta T sets mean temperature increase associated with this distribution. The exponential form of γ(T)\gamma(T) represents a heating scenario in which relatively weak events are considerably more frequent than events capable of heating the plasma to coronal temperatures. This choice is motivated by observations of small-scale brightenings, which indicate that most heating events remain confined to transition-region temperatures, whereas only a small fraction reach temperatures of order 10610^6 K [41, 32, 31, 30]. As discussed by L. Barbieri & P. Démoulin [13], the resulting density and temperature profiles depend only weakly on the specific functional form adopted for γ(T)\gamma(T), provided that its mean temperature is kept fixed and remains of the order of coronal temperatures, i.e., ⟨T−T0⟩=ΔT∼106\langle T-T_0\rangle= \Delta T \sim10^6 K.

Results

Figure 1 compares the density and temperature profiles predicted by the present model, which accounts for gravitational filtering, Coulomb collisions, and magnetic-field inhomogeneity, with those obtained in three limiting cases: the collisionless model with constant flux-tube cross section [11 b], the collisional model with constant flux-tube cross section [14], and the collisionless model with magnetic-field inhomogeneity [16]. The density is computed with Equation (26), while the parallel and perpendicular temperatures are obtained with Equation (28). The total temperature is then computed with Equation (29). We obtain the collisionless limit by setting TM(s)=T0T_M(s) = T_0 and ω(T,s)=R(T,s)=1\omega(T,s) = R(T,s) = 1 for all ss, whereas we obtain the constant-cross-section limit by setting c(s)=0c(s) = 0 for all ss. The purely collisionless constant-cross-section case is therefore the result of applying both limits simultaneously.

Figure 1. Comparison of the temperature and density profiles obtained for the different kinetic models considered in this work and in our previous studies ([11, 14 c]). The panels show the parallel temperature T∥T_{\parallel}, the perpendicular temperature T⊥T_{\perp}, the total temperature TT, and the number density nn as functions of height. The four curves show the results of our present model including both Coulomb collisions and magnetic-field inhomogeneity (solid blue), the collisionless model with magnetic-field inhomogeneity (dashed red), the collisional model without field inhomogeneity (dash-dotted green), and the purely collisionless model without field inhomogeneity (dotted purple), as indicated in the legend. The parameters used in the calculation are n0=2×1010 cm−3n_0 = 2 \times10^{10}\ \mathrm{cm}^{-3}, T0=104 KT_0 = 10^4\ \mathrm{K}, d=2×103 kmd = 2 \times10^3\ \mathrm{km}, and ΔT=106 K\Delta T = 10^6\ \mathrm{K}, with the heating-event temperature distribution given by Equation (47).

In the purely collisionless constant-cross-section case (dotted purple curves in Figure 1), the temperature inversion results solely from gravitational filtering of the multi-temperature distribution generated by stochastic heating at the lower boundary. The different temperature components have different gravitational scale heights, so that the relative contribution of the hotter populations progressively increases with height. Since the magnetic field is constant, the distribution remains isotropic, with T∥=T⊥T_{\parallel} = T_{\perp}, while the total temperature increases toward coronal values. When Coulomb collisions are included while the flux-tube cross section is kept constant (dash-dotted green curves in Figure 1), collisional relaxation progressively reduces the contribution of the original suprathermal populations to the local maxwellian core. The collisional efficiency depends strongly on particle energy: lower-energy suprathermal particles are more efficiently thermalized by collisions, whereas the more energetic particles have longer collisional lengths and travel over larger distances before being incorporated into the Maxwellian core. This selective attenuation explains both the lower density and the higher coronal temperature with respect to the purely collisionless constant-cross-section case. A substantial fraction of the particles that would reach coronal heights in the collisionless model are thermalized at lower altitudes, thereby reducing the coronal density. At the same time, the suprathermal population that reaches larger heights is increasingly dominated by hotter components, which are less affected by collisions. The relative weight of high-energy particles in the coronal velocity distribution is therefore enhanced, leading to a higher coronal temperature despite the reduction in the number of particles reaching these heights.

A different behaviour emerges when magnetic-field inhomogeneity is introduced in the collisionless limit (dashed red curves in Figure 1). Gravitational filtering still preferentially selects the hotter components because of their larger gravitational scale heights. As the magnetic-field strength decreases along the flux tube, conservation of the magnetic moment leads to a reduction in the perpendicular kinetic energy, while conservation of total particle energy determines the corresponding variation of the parallel kinetic energy in the presence of the gravitational and Pannekoek potentials. Together with the restriction of the velocity-space domain connected to the lower boundary, these effects produce a pronounced temperature anisotropy. In particular, the decrease in magnetic-field strength, combined with the pitch-angle-dependent connectivity condition, leads to a much stronger depletion of the perpendicular pressure than of the parallel pressure, resulting in T∥>T⊥T_{\parallel} > T_{\perp}. The restriction of the collisionlessly accessible velocity space also produces an additional density depletion relative to the collisionless constant-cross-section case. The present calculation shows that these strong signatures of magnetic-field inhomogeneity are almost completely suppressed once Coulomb collisions are included (solid blue curves in Figure 1). The profiles obtained with both collisions and magnetic-field inhomogeneity are nearly indistinguishable from those of the collisional constant-cross-section model. This behaviour results from the efficient collisional redistribution of particles in velocity space. Collisional pitch-angle scattering progressively populates the region that is disconnected from the lower boundary in the collisionless mapping, thereby suppressing the anisotropy associated with the inhomogeneous magnetic field. In terms of the reduced closure adopted here, as R(T,s)R(T,s) evolves toward R(T,s)≃0R(T,s) \simeq0, the completed geometrical factors satisfy Gi(T,s)→1G_i(T,s) \to1, and the distinction between the parallel and perpendicular geometrical moments is progressively erased. Consequently, for realistic parameters considered here, collisional pitch-angle redistribution is sufficiently efficient that T∥T_{\parallel} and T⊥T_{\perp} remain nearly equal throughout the transition region and corona despite the expansion of the magnetic flux tube. Finally, we emphasize that the reference value of dd adopted here corresponds to a particularly strong magnetic-field inhomogeneity, representing the most extreme configuration considered in the previous collisionless study (L. Barbieri et al. [16]). We have also varied dd by one order of magnitude above and below the reference value used in Figure 1. Throughout this range, the density and temperature profiles obtained with both Coulomb collisions and magnetic-field inhomogeneity remain nearly indistinguishable from those obtained with collisions alone. This result demonstrate that, under the plasma conditions considered here, the collisional suppression of the anisotropy associated with magnetic-field inhomogeneity is robust even for substantial variations in the magnetic-field geometry.

To summarize, the comparison of the four cases therefore shows that gravitational filtering remains responsible for the temperature inversion. Coulomb collisions strongly modify the transport of the heated populations and efficiently suppress the additional density depletion and temperature anisotropy produced by the magnetic-field inhomogeneity.

Long-time-scale regime

We now consider the long-time-scale regime, in which the characteristic duration τ\tau and waiting time twt_w of the heating events are comparable to or longer than the proton crossing time tc,pt_{c,p}

τ,tw≳tc,p.(48)\tau, t_w \gtrsim t_{c,p}. \tag*{(48)}

As analysed by L. Barbieri et al. [14], in this regime, an individual heating event persists sufficiently long for the plasma to mix within a heated flux tube. The lower-boundary distribution of a heated loop can therefore be described by a single Maxwellian at a temperature T^\widehat{T}, and the corresponding loop evolves toward an isothermal configuration.

Single-temperature limit of the multi-temperature model

Within the formalism developed in the present work, the single-temperature regime can be obtained directly as limit of the multi-temperature distribution introduced in Equation (19) by setting the heating-temperature distribution to

γ(T)=δ(T−T^),(49)\gamma(T) = \delta(T - \widehat{T}), \tag*{(49)}

so that the integral over the different heated populations collapses onto a single Maxwellian population at temperature T^\widehat{T}. The density and the parallel and perpendicular pressure moments are then evaluated from the same expressions used in the multi-temperature model, namely Equations (26) and (27), with all temperature-dependent quantities evaluated at T=T^T = \widehat{T}. In the long-time-scale regime, as anticipated above, each individual heated loop is approximately isothermal, in contrast to the fast-time-scale regime. The temperature inversion discussed by L. Barbieri et al. [14] therefore does not develop within individual loops, as it does in the fast-time-scale regime, but emerges only after spatial averaging over an ensemble of unresolved flux tubes characterized by different temperatures. The resulting temperature and density profiles are compatible with the observed ones (L. Barbieri et al. [14]).

Strongly collisional single-temperature regime

An important property of the long-time-scale regime is its high collisionality. As shown by L. Barbieri et al. [14], for the realistic parameters considered here, the plasma within an individual heated loop is strongly collisional. We adopt a base density n0≃109 cm−3n_0 \simeq10^9\ \mathrm{cm}^{-3}, representative of the density inferred for small-scale coronal brightenings and campfire-like events [19, 83], together with a mean temperature T^≃106 K\hat{T} \simeq10^6\ \mathrm{K}. For these parameters, the collisional mean free path is much smaller than the macroscopic length scale of the loop. At the lower boundary, this corresponds to a Knudsen number of order

Kn0=λ(T^,0)L∼10−3,(50)\mathrm{Kn}_0 = \frac{\lambda(\hat{T},0)}{L} \sim10^{-3}, \tag*{(50)}

where L=0.1R⊙L = 0.1R_\odot denotes the typical vertical size of the system and R⊙R_\odot is the solar radius. The plasma is therefore well within the strongly collisional regime. As an order-of-magnitude estimate of the transition to collisionless behaviour, we characterise the place where Kn0∼1\mathrm{Kn}_0 \sim1, i.e., the location where the collisional length becomes comparable to the macroscopic length LL. From Equation (34), at fixed temperature and to leading order in the density dependence, Kn0\mathrm{Kn}_0 scales approximately as n0−1n_0^{-1}, apart from the dependence contained in the Coulomb logarithm. Starting from Kn0∼10−3\mathrm{Kn}_0 \sim10^{-3} at n0=109 cm−3n_0 = 10^9\ \mathrm{cm}^{-3}, the condition Kn0∼1\mathrm{Kn}_0 \sim1 is therefore reached, to order of magnitude, when

n0,Kn∼1∼106 cm−3.(51)n_{0,\mathrm{Kn}\sim1} \sim10^6\ \mathrm{cm}^{-3}. \tag*{(51)}

Thus, for T^≃106 K\hat{T} \simeq10^6\ \mathrm{K} and L=0.1R⊙L = 0.1R_\odot, the density adopted here is approximately three orders of magnitude larger than the density at the location where Kn0∼1\mathrm{Kn}_0 \sim1. Under these conditions, Coulomb collisions efficiently thermalize the particle population over distances much shorter than the characteristic length of the loop. As found in the constant-cross-section model of L. Barbieri et al. [14], an individual heated population remains close to a Maxwellian characterized by the single temperature T^\hat{T}, and the corresponding temperature profile remains approximately isothermal along the loop.

Effect of magnetic-field inhomogeneity

Figure 2 illustrates the effects of magnetic-field inhomogeneity and Coulomb collisions in the single-temperature configuration, obtained by adopting Equation (49) with T=T^T = \hat{T}. As in Figure 1, we compare the profiles obtained with and without collisions and magnetic-field inhomogeneity. In the collisionless limit, magnetic-field inhomogeneity produces effects similar to those discussed in the fast-time-scale regime (dashed red curves). The restriction of the velocity-space domain connected to the lower boundary leads to a pronounced temperature anisotropy, with T∥>T⊥T_{\parallel} > T_{\perp}, and an additional density depletion. Consequently, the total temperature departs from the isothermal profile, despite the single-temperature Maxwellian prescribed at the boundary.

Figure 2. The same quantities as in Figure 1 are shown, but for the long-time-scale regime, in which the heated population is described by a single Maxwellian. The figure compares the collisional solution with magnetic field inhomogeneity (solid blue curves), the collisionless solution with magnetic field inhomogeneity (dashed red curves), and the collisional constant-cross-section solution (dashed dotted green curves). The parameters adopted in the calculation are the same of Figure 1 apart from n0=109 cm−3n_0 = 10^9\ \mathrm{cm}^{-3}, T^=106 K\hat{T} = 10^6\ \mathrm{K}.

For the realistic plasma parameters considered here, Coulomb collisions largely suppress these effects (solid blue curves). The resulting temperature and density profiles nearly coincide with those of the collisional constant-cross-section model, with T∥≃T⊥≃T^T_{\parallel} \simeq T_{\perp} \simeq\hat{T}. The extent of this suppression, however, depends on the plasma collisionality. This result follows directly from the strong collisionality quantified above. For Kn0∼10−3\mathrm{Kn}_0 \sim10^{-3}, collisional redistribution operates over a spatial scale much shorter than the characteristic macroscopic scale of the loop. Collisional pitch-angle scattering therefore efficiently counteracts the anisotropy associated with the collisionless accessibility condition and progressively populates the region of velocity space that would otherwise remain disconnected from the lower boundary. We conclude that the inclusion of an inhomogeneous magnetic field does not alter the main physical picture obtained by L. Barbieri et al. [14] even for the long-time-scale regime. As in the fast-time-scale regime, we have verified that the results are insensitive to variations of the parameter dd by one order of magnitude above and below the reference value adopted in Figure 2.

Mechanical equilibrium of the reduced single-temperature solution

A final point of discussion concerns the mechanical equilibrium of the reduced single-temperature solution. When magnetic-field inhomogeneity and the collisional filling of the disconnected velocity-space domain are simultaneously included, imposing a fixed temperature T^\hat{T} does not, in general, provide an exact solution of the parallel pressure-balance equation, Equation (42). The reason is that the spatial evolution of R(T^,s)R(\hat{T},s) modifies the velocity moments along the loop and therefore introduces an additional contribution to their spatial derivatives. As a result, the prescribed isothermal solution can leave a finite residual in the parallel momentum balance during the intermediate stage of the collisional evolution. As shown analytically in Appendix § 9, this residual vanishes in the collisionless limit and in the limit in which the disconnected velocity-space domain is completely filled, but is in general non-zero between these two limiting regimes. For the strongly collisional parameters adopted in Figure 2, R(T^,s)R(\hat{T},s) decreases rapidly toward zero with height. The distribution then approaches the isotropic single-temperature limit, for which the pressure-balance residual vanishes.

Summary, Limitations and Perspectives

In this work, we investigate the combined effects of stochastic heating, gravitational filtering, magnetic-field inhomogeneity, and Coulomb collisions in a coronal magnetic flux tube. Here, we extend our previous collisionless study (L. Barbieri et al. [15]) by including Coulomb collisions and investigate how collisional redistribution modifies the kinetic effects produced by magnetic-field inhomogeneity and gravitational filtering. Collisions are incorporated through a reduced prescription describing both the progressive thermalization of suprathermal populations and the pitch-angle redistribution of particles into the velocity-space region that is disconnected from the lower boundary in the collisionless mapping. Coulomb collisions strongly suppress the kinetic signatures of magnetic-field inhomogeneity for the realistic plasma parameters considered here. In the collisionless limit, the conservation of particle energy and magnetic moment restricts the accessible region of velocity space. The resulting pitch-angle-dependent depletion produces a substantial density reduction and a pronounced temperature anisotropy, with T∥>T⊥T_{\parallel} > T_{\perp}. Once collisions are included, collisional pitch-angle scattering progressively populates the disconnected velocity-space region and reduces the difference between the parallel and perpendicular pressures. The resulting macroscopic profiles therefore approach those obtained in the collisional constant-cross-section model of L. Barbieri et al. [14].

In the short-time-scale regime, this collisional isotropization does not remove the temperature inversion generated by stochastic heating. Populations produced at different temperatures coexist within the same flux tube, and gravitational filtering continues to select preferentially the hotter components at increasing height. Magnetic-field inhomogeneity effects on the density and temperature anisotropy are largely suppressed when Coulomb collisions are included at the level considered here. The resulting profiles are therefore predominantly controlled by gravitational filtering and collisional thermalization.

The suppression of the impact of magnetic-field inhomogeneity is still present in the long-time-scale regime. Individual heated loops are highly collisional and approach a single-temperature configuration. In the collisionless model, the pitch-angle-dependent restriction of the velocity-space domain connected to the lower boundary would produce a strongly anisotropic distribution, even when the prescribed boundary Maxwellian is isotropic. Coulomb collisions instead redistribute particles in velocity space, yielding an approximately isotropic distribution with T∥≃T⊥≃T^T_{\parallel} \simeq T_{\perp} \simeq\hat{T}. The approximately isothermal profiles obtained for individual heated loops in our previous long-time-scale model is therefore recovered even when magnetic-field inhomogeneity is taken into account. In this regime, temperature inversion emerges only after spatial averaging over an ensemble of unresolved loops characterized by different temperatures, yielding temperature and density profiles with values comparable to those observed in the solar corona L. Barbieri & P. Démoulin [13].

The reduced collisional prescription adopted here has some limitations. The evolution of the attenuation factor ω(T,s)\omega(T,s) was rigorously derived in our previous constant-cross-section model L. Barbieri et al. [14]. By contrast, the evolution of R(T,s)R(T,s), which describes the collisional filling of the velocity-space domain disconnected from the lower boundary, is introduced here phenomenologically. In particular, the assumption that both processes are characterized by the same collisional length λ(T,s)\lambda(T,s) is a simplifying hypothesis and does not follow directly from the Coulomb collision operator. Indeed, energy-space relaxation and pitch-angle diffusion involve distinct contributions to the Fokker–Planck collision operator and need not be characterized by identical spatial scales. A self-consistent determination of the filling of the disconnected domain would require solving the collisional kinetic equation for the velocity distribution function, including pitch-angle diffusion across the collisionless connectivity boundary. Such a treatment lies beyond the scope of the present model. The present prescription is conceptually related to closures adopted in exospheric kinetic models, in which velocity-space domains not directly connected to the lower boundary may be assumed to be fully populated, depleted, or partially populated [65] (V. Pierard & J. Lemaire 1996; V. Pierard & J. Lemaire 2001; V. Pierard & K. Stegen 2008). This analogy is limited to the treatment of velocity-space completion and does not extend to the choice of the equation that governs the evolution of the collisional filling function RR.

These results also indicate a clear direction for the extension of the present framework. The model considered here assumes a symmetric loop with no field-aligned bulk flow and velocity distribution functions that are symmetric with respect to the parallel velocity. Relaxing this assumption would allow for asymmetric stochastic heating at the two footpoints to generate asymmetric velocity distribution functions and a finite field-aligned particle flux and heat-flux. Such configurations can produce siphon flows (e.g. F. Reale [68]) along coronal loops and require the ambipolar electric field to be determined self-consistently together with the electron and proton distribution functions.

Acknowledgments

L.B. wants to thank Sorbonne Université for financial support within the framework of the Initiative Physique des Infinis. L.B. wants to thank Filippo Pantellini for useful discussion. D.V. is funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project number 568092272.

Evolution of the Maxwellian core

In this Appendix, we provide the physical interpretation of the terms entering the evolution equations for the amplitude C(s)C(s), that is Eq. (39), and temperature TM(s)T_M(s) of the Maxwellian core, that is Eq. (43).

Evolution of the core amplitude

The evolution of the core amplitude C(s)C(s) follows from the local particle-conservation condition introduced in Equation (38). The different terms entering its evolution describe the redistribution of particles associated with the collisional attenuation of the suprathermal populations and with the progressive filling of the velocity-space domains that are disconnected from the lower boundary under the assumption of collisionless trajectories. The first contribution inside the temperature integral,

G∗(T,s)λ(T,s)\frac{\mathcal{G}_*(T,s)}{\lambda(T,s)}

describes the reduction of the density carried by each suprathermal Maxwellian population through collisional thermalization. As the survival factor ω(T,s)\omega(T,s) decreases, particles are removed from the corresponding suprathermal population and transferred to the Maxwellian core. The second contribution,

−R(T,s)[1−G∗(T,s)]λ(T,s)-\frac{R(T,s)\left[1-\mathcal{G}_*(T,s)\right]}{\lambda(T,s)}

arises from the simultaneous collisional filling of the disconnected velocity-space domain. As R(T,s)R(T,s) decreases, this domain becomes progressively populated through collisional pitch-angle scattering. The associated increase in the density carried by the suprathermal population partially compensates the density reduction produced by its collisional thermalization and therefore reduces the corresponding increase required in the core amplitude C(s)C(s) by local particle conservation. Finally, the contribution

C(s)RM(s)[1−G∗,M(s)]G∗,M(s)λM(s)\frac{C(s)R_M(s)\left[1-\mathcal{G}_{*,M}(s)\right]}{\mathcal{G}_{*,M}(s)\lambda_M(s)}

accounts for the analogous collisional filling of the disconnected velocity-space domain associated with the Maxwellian core. As RM(s)R_M(s) decreases, an increasing fraction of the local velocity space becomes populated by the core. At fixed C(s)C(s), this filling would increase the core density.

Evolution of the core temperature

We now describe the terms entering the evolution equation for the core temperature TM(s)T_M(s) given by Equation (43). The term

−AtdH∥ds-A_t\frac{\mathrm{d}\mathcal{H}_{\parallel}}{\mathrm{d}s}

contains the complete spatial variation of the suprathermal parallel pressure. Since H∥\mathcal{H}_{\parallel} depends on the Boltzmann factor, the collisional survival factor ω(T,s)\omega(T,s), and the completed geometrical factor G∥(T,s)\mathcal{G}_{\parallel}(T,s), it includes the effects of the potential, collisional thermalization, magnetic-field inhomogeneity, and the filling of the disconnected velocity-space domain. The contribution

−1kBdϕds(AtH∗+CEMG∗,M)-\frac{1}{k_{\mathrm{B}}}\frac{\mathrm{d}\phi}{\mathrm{d}s}\left(A_t\mathcal{H}_*+C E_M\mathcal{G}_{*,M}\right)

is associated with the force, whereas

ΔPdln⁡Bds\Delta P\frac{\mathrm{d}\ln B}{\mathrm{d}s}

is the geometrical contribution associated with the anisotropic pressure tensor and the variation of the magnetic-field strength. The latter vanishes for an isotropic distribution or for a constant magnetic-field strength. The term

−dCdsTMEMG∥,M-\frac{\mathrm{d}C}{\mathrm{d}s}T_M E_M\mathcal{G}_{\parallel,M}

accounts for the variation of the core parallel pressure associated with the evolution of its amplitude. The remaining contribution,

−CTMEM[dG∥,Mds∣TM−G∥,MkBTMdϕds]-C T_M E_M \left[\left.\frac{d\mathcal{G}_{\parallel,M}}{ds}\right|_{T_M}-\frac{\mathcal{G}_{\parallel,M}}{k_{\mathrm{B}}T_M}\frac{d\phi}{ds}\right]

contains the explicit spatial variation of the Maxwellian-core parallel pressure at fixed TMT_M. The derivative (dG∥,M/ds)TM\left(d\mathcal{G}_{\parallel,M}/ds\right)_{T_M} accounts for the spatial variation of the velocity-space geometry and of the disconnected-domain filling at fixed core temperature, whereas the second term originates from the explicit spatial derivative of the Boltzmann factor EME_M. Finally, the denominator

CEM[G∥,M(1+ϕkBTM)+TMdG∥,MdTM](52)C E_M\left[\mathcal{G}_{\parallel,M}\left(1+\frac{\phi}{k_{\mathrm{B}}T_M}\right)+T_M\frac{d\mathcal{G}_{\parallel,M}}{dT_M}\right] \tag*{(52)}

represents the response of the Maxwellian-core parallel pressure to a variation of TMT_M, with the remaining variables held fixed. The derivative dG∥,M/dTMd\mathcal{G}_{\parallel,M}/dT_M accounts for the change in the velocity-space contribution of the Maxwellian core as its temperature varies.

Numerical solution of the collisional system

In this Appendix, we describe the numerical procedure used to solve the collisional system introduced in the main text. The method follows the numerical strategy of L. Barbieri et al. [14], extended here to account for magnetic-field inhomogeneity and the collisional filling of the trapped velocity-space domain. The continuous temperature dependence of the suprathermal population is first replaced by a finite temperature grid. The resulting problem can then be written as a finite system of coupled ordinary differential equations along the curvilinear coordinate ss.

Temperature discretization

The temperature integrals are truncated at a sufficiently large temperature Tmax⁡T_{\max} such that the contribution of the tail of γ(T)\gamma(T) above Tmax⁡T_{\max} is negligible. We introduce a uniform temperature grid

Tj=T0+(j−1)ΔT,j=1,…,NT,(53)T_j=T_0+(j-1)\Delta T,\qquad j=1,\ldots,N_T, \tag*{(53)}

with

ΔT=Tmax⁡−T0NT−1.(54)\Delta T=\frac{T_{\max}-T_0}{N_T-1}. \tag*{(54)}

For a generic function F(T,s)F(T,s), the temperature integral is evaluated using the trapezoidal rule,

∫T0Tmax⁡F(T,s) dT≃∑j=1NTqjF(Tj,s),(55)\int_{T_0}^{T_{\max}} F(T,s)\,dT \simeq\sum_{j=1}^{N_T}q_jF(T_j,s), \tag*{(55)}

where the quadrature weights are

q1=qNT=ΔT2,qj=ΔT,j=2,…,NT−1.(56)q_1=q_{N_T}=\frac{\Delta T}{2},\qquad q_j=\Delta T,\quad j=2,\ldots,N_T-1. \tag*{(56)}

At each temperature node, we define

ωj(s)≡ω(Tj,s).(57)\omega_j(s)\equiv\omega(T_j,s). \tag*{(57)}

The discretized collisional evolution equation is therefore

dωjds=−ωj(s)λj(s),λj(s)≡λ(Tj,s),j=1,…,NT,(58)\frac{d\omega_j}{ds}=-\frac{\omega_j(s)}{\lambda_j(s)},\qquad\lambda_j(s)\equiv\lambda(T_j,s),\quad j=1,\ldots,N_T, \tag*{(58)}

Since RR obeys the same equation with the same boundary condition, its discrete values are obtained directly as

Rj(s)≡R(Tj,s)=ωj(s).(59)R_j(s)\equiv R(T_j,s)=\omega_j(s). \tag*{(59)}

Thus, no additional differential equations for RR need to be solved.

Discrete evaluation of the velocity moments

At every position ss, the collisionally completed geometrical factors are evaluated at each temperature node as

Gi,j(s)=1−Rj(s)[1−Gi(Tj,s)],i∈{∗,∥,⊥}.(60)G_{i,j}(s) = 1 - R_j(s) [1 - G_i(T_j,s)], \qquad i \in\{*,\parallel,\perp\}. \tag*{(60)}

The suprathermal contribution to the density integral is

S∗(s)≡∫T0Tmax⁡dT γ(T) ω(T,s) e−ϕ(s)/(kBT)G∗(T,s)≃∑j=1NTqj γ(Tj) ωj(s) e−ϕ(s)/(kBTj)G∗,j(s).(61)S_*(s) \equiv\int_{T_0}^{T_{\max}} \mathrm{d}T\,\gamma(T)\,\omega(T,s)\,e^{-\phi(s)/(k_{\mathrm{B}}T)}G_*(T,s) \simeq\sum_{j=1}^{N_T}q_j\,\gamma(T_j)\,\omega_j(s)\,e^{-\phi(s)/(k_{\mathrm{B}}T_j)}G_{*,j}(s). \tag*{(61)}

RM(s)R_M(s) is not evolved independently. Instead, it is obtained from Equation (25). Since the instantaneous value of TM(s)T_M(s) does not in general coincide with one of the temperature nodes TjT_j, the value of RM(s)R_M(s) is evaluated numerically by interpolating the discrete collisional solution {Rj(s)}={ωj(s)}\{R_j(s)\} = \{\omega_j(s)\} at the current value of TM(s)T_M(s). We then evaluate the corresponding core geometrical factors as

Gi,M(s)=1−RM(s)[1−Gi(TM(s),s)],i∈{∗,∥,⊥}.(62)G_{i,M}(s) = 1 - R_M(s) [1 - G_i(T_M(s),s)], \qquad i \in\{*,\parallel,\perp\}. \tag*{(62)}

We reconstruct the macroscopic quantities algebraically from the current numerical solution as

n(s)=n0[AtS∗(s)+C(s)EM(s)G∗,M(s)],(63)n(s) = n_0 [A_tS_*(s) + C(s)E_M(s)G_{*,M}(s)], \tag*{(63)}
p∥(s)=n0kB[AtS∥(s)+C(s)TM(s)EM(s)G∥,M(s)],(64)p_\parallel(s) = n_0 k_{\mathrm{B}} [A_tS_\parallel(s) + C(s)T_M(s)E_M(s)G_{\parallel,M}(s)], \tag*{(64)}

and

p⊥(s)=n0kB[AtS⊥(s)+C(s)TM(s)EM(s)G⊥,M(s)].(65)p_\perp(s) = n_0 k_{\mathrm{B}} [A_tS_\perp(s) + C(s)T_M(s)E_M(s)G_{\perp,M}(s)]. \tag*{(65)}

The corresponding local parallel, perpendicular, and scalar temperatures are computed from Equations (28) and (29), respectively.

Evaluation of the collisional mean free paths

Once the macroscopic quantities are reconstructed, we evaluate the Coulomb logarithm independently at each temperature node as

ln⁡Λj(s)=ln⁡[3kBTj2e2kBT(s)4πe2n(s)].(66)\ln\Lambda_j(s) = \ln\left[\frac{3k_{\mathrm{B}}T_j}{2e^2}\sqrt{\frac{k_{\mathrm{B}}T(s)}{4\pi e^2n(s)}}\right]. \tag*{(66)}

The second-order velocity moments associated with the jj-th Maxwellian population are

⟨v∥2⟩j=kBTjmG∥,j(s)G∗,j(s),(67)\langle v_\parallel^2\rangle_j = \frac{k_{\mathrm{B}}T_j}{m}\frac{G_{\parallel,j}(s)}{G_{*,j}(s)}, \tag*{(67)}

and

⟨v⊥2⟩j=kBTjmG⊥,j(s)G∗,j(s).(68)\langle v_\perp^2\rangle_j = \frac{k_{\mathrm{B}}T_j}{m}\frac{G_{\perp,j}(s)}{G_{*,j}(s)}. \tag*{(68)}

Here, ⟨v⊥2⟩j\langle v_\perp^2\rangle_j refers to one of the two perpendicular velocity components. The corresponding mean free path is then

λj(s)=m2[⟨v∥2⟩j+2⟨v⊥2⟩j]24πe4n(s)ln⁡Λj(s).(69)\lambda_j(s) = \frac{m^2\left[\langle v_\parallel^2\rangle_j + 2\langle v_\perp^2\rangle_j\right]^2}{4\pi e^4n(s)\ln\Lambda_j(s)}. \tag*{(69)}

We use the same prescription to evaluate the mean free path associated with the Maxwellian core.

Discrete equations for C(s)C(s) and TM(s)T_M(s)

We evaluate the temperature integral entering the evolution equation for the Maxwellian-core amplitude using the same quadrature approach. Defining

IC(s)=∫T0Tmax⁡dT γ(T)e−ϕ(s)/(kBT)ω(T,s)[G∗(T,s)λ(T,s)−R(T,s)[1−G∗(T,s)]λ(T,s)].(70)I_C(s) = \int_{T_0}^{T_{\max}} \mathrm{d}T\,\gamma(T)e^{-\phi(s)/(k_{\mathrm{B}}T)}\omega(T,s)\left[\frac{G_*(T,s)}{\lambda(T,s)}-\frac{R(T,s)[1-G_*(T,s)]}{\lambda(T,s)}\right]. \tag*{(70)}

we obtain

IC(s)≃∑j=1NTqjγ(Tj)e−ϕ(s)/(kBTj)ωj(s)[G∗,j(s)λj(s)−Rj(s)[1−G∗(Tj,s)]λj(s)].(71)I_C(s) \simeq\sum_{j=1}^{N_T}q_j\gamma(T_j)e^{-\phi(s)/(k_{\mathrm{B}}T_j)}\omega_j(s)\left[\frac{G_{*,j}(s)}{\lambda_j(s)}-\frac{R_j(s)[1-G_*(T_j,s)]}{\lambda_j(s)}\right]. \tag*{(71)}

Since Rj=ωjR_j=\omega_j, we are able to evaluate this expression entirely from the single set of evolved collisional variables {ωj}\{\omega_j\}. The evolution equation for the Maxwellian-core amplitude is then

dCds=AtIC(s)EM(s)G∗,M(s)−C(s)RM(s)[1−G∗,M(s)]G∗,M(s)λM(s).(72)\frac{\mathrm{d}C}{\mathrm{d}s}=\frac{A_t I_C(s)}{E_M(s)G_{*,M}(s)}-\frac{C(s)R_M(s)[1-G_{*,M}(s)]}{G_{*,M}(s)\lambda_M(s)}. \tag*{(72)}

For compactness, we write this equation as

dCds=FC(s,{ωj},C,TM).(73)\frac{\mathrm{d}C}{\mathrm{d}s}=F_C\left(s,\{\omega_j\},C,T_M\right). \tag*{(73)}

where the required values of RjR_j and RMR_M follow algebraically from Equations (59) and interpolation, respectively. Similarly, the quantities entering the suprathermal contribution to the anisotropic pressure balance are

H∗(s)≃∑j=1NTqjγ(Tj)ωj(s)e−ϕ(s)/(kBTj)G0,j(s)(74)\mathcal{H}_*(s)\simeq\sum_{j=1}^{N_T}q_j\gamma(T_j)\omega_j(s)e^{-\phi(s)/(k_{\mathrm{B}}T_j)}G_{0,j}(s) \tag*{(74)}

and

Hi(s)≃∑j=1NTqjTjγ(Tj)ωj(s)e−ϕ(s)/(kBTj)Gi,j(s),i∈{∥,⊥}.(75)\mathcal{H}_i(s)\simeq\sum_{j=1}^{N_T}q_jT_j\gamma(T_j)\omega_j(s)e^{-\phi(s)/(k_{\mathrm{B}}T_j)}G_{i,j}(s),\quad i\in\{\parallel,\perp\}. \tag*{(75)}

The evolution equation for the Maxwellian-core temperature is then evaluated from Equation (43), using the discrete moments and the current values of the local plasma quantities. We write

dTMds=FT(s,{ωj},C,TM).(76)\frac{\mathrm{d}T_M}{\mathrm{d}s}=F_T\left(s,\{\omega_j\},C,T_M\right). \tag*{(76)}

All trapped-domain RR required in FTF_T are reconstructed from the same numerical solution for ω\omega and are therefore not additional dynamical variables.

Reduction to a system of ordinary differential equations

After temperature discretization, we reduce the original integro-differential problem to a finite-dimensional system of ordinary differential equations. Since we obtain Rj=ωjR_j=\omega_j and RMR_M algebraically from the temperature interpolation, the state vector contains only the NTN_T collisional variables ωj\omega_j, together with the Maxwellian-core amplitude and temperature,

y(s)=(ω1,…,ωNT,C,TM)T.(77)\mathbf{y}(s)=(\omega_1,\ldots,\omega_{N_T},C,T_M)^{\mathrm{T}}. \tag*{(77)}

The dimension of the differential system is therefore NODE=NT+2N_{\mathrm{ODE}}=N_T+2. The complete numerical problem is written as

dyds=F(s,y).(78)\frac{\mathrm{d}\mathbf{y}}{\mathrm{d}s}=\mathbf{F}(s,\mathbf{y}). \tag*{(78)}

The first NTN_T components of F\mathbf{F} are

Fj=−ωjλj,j=1,…,NT,(79)F_j=-\frac{\omega_j}{\lambda_j},\quad j=1,\ldots,N_T, \tag*{(79)}

while the final two components are

FNT+1=FC(s,y),(80)F_{N_T+1}=F_C(s,\mathbf{y}), \tag*{(80)}

and

FNT+2=FT(s,y).(81)F_{N_T+2}=F_T(s,\mathbf{y}). \tag*{(81)}

The boundary conditions are

ωj(0)=1,j=1,…,NT,(82)\omega_j(0)=1,\qquad j=1,\ldots,N_T, \tag*{(82)}

together with Eq. (23).

Stiffness and implicit integration

The finite-dimensional system in Equation (78) is intrinsically stiff. Because there is a wide separation of collisional scales between low-energy and suprathermal particles and is not specific to the present reduced description. A direct kinetic treatment based on the full Fokker–Planck collision operator would need to resolve the same multi-scale collisional dynamics in velocity space, leading to an even more demanding numerical problem. An important advantage of the present approach is that the collisional dynamics is reduced to a one-dimensional system of ordinary differential equations along ss, so that the resulting stiffness can be efficiently handled using an adaptive implicit ODE solver. The origin of the stiffness in the present formulation can be understood directly from the collisional relaxation equations,

dωjds=−ωjλj.(83)\frac{\mathrm{d}\omega_j}{\mathrm{d}s}=-\frac{\omega_j}{\lambda_j}. \tag*{(83)}

The Coulomb mean free path depends strongly on particle energy. Consequently, the coldest Maxwellian components easily have λj\lambda_j much smaller than the characteristic macroscopic length scales over which the density, temperature, and magnetic-field strength vary. At the same time, the hottest populations easily possess much larger mean free paths and therefore evolve over macroscopic distances. The complete integration would consequently be forced to follow the microscopic mean free path of the coldest populations even in regions where all macroscopic quantities vary over much larger spatial scales. An explicit scheme is therefore numerically inefficient for the present multi-scale problem. Following L. Barbieri et al. [14], we instead integrate the system using an adaptive implicit solver suitable for stiff ordinary differential equations. In the present implementation, we use MATLAB ode15s. The implicit treatment allows us to follow the rapidly relaxing collisional modes without imposing a globally microscopic spatial step, while the adaptive step-size control automatically increases the integration step when the solution evolves on larger spatial scales. We check the numerical solution through standard convergence and consistency tests. In particular, we increase Tmax⁡T_{\max} and NTN_T until no appreciable changes are observed in the density and temperature profiles. The numerical scheme also recovers the collisionless solution when all collisional mean free paths become much larger than the characteristic size of the system.

Pressure balance in the single-temperature limit

In this Appendix, we examine whether the reduced kinetic model satisfies the stationary pressure-balance equation in the single-temperature limit introduced in § 4. We consider a population at a fixed temperature T^\hat{T} so that the density and pressure components are

n(s)=n0exp⁡[−ϕ(s)kBT^]G∗(T^,s)(84)n(s)=n_0\exp\left[-\frac{\phi(s)}{k_B\hat{T}}\right]\mathcal{G}_*(\hat{T},s) \tag*{(84)}

and

pi(s)=n0kBT^exp⁡[−ϕ(s)kBT^]Gi(T^,s),i∈{∥,⊥}.(85)p_i(s)=n_0k_B\hat{T}\exp\left[-\frac{\phi(s)}{k_B\hat{T}}\right]\mathcal{G}_i(\hat{T},s),\qquad i\in\{\parallel,\perp\}. \tag*{(85)}

To determine whether the single-temperature solution satisfies the pressure-balance relationship in Equation (42), we define the pressure-balance residual

RP≡dp∥ds−(p∥−p⊥)dln⁡Bds+ndϕds.(86)R_P\equiv\frac{\mathrm{d}p_\parallel}{\mathrm{d}s}-(p_\parallel-p_\perp)\frac{\mathrm{d}\ln B}{\mathrm{d}s}+n\frac{\mathrm{d}\phi}{\mathrm{d}s}. \tag*{(86)}

Equilibrium conditions correspond to RP=0R_P=0. Using Equations (84), (85), and (30), the residual becomes

RP=−n0kBT^exp⁡[−ϕkBT^]dRds(1−G∥).(87)R_P=-n_0k_B\hat{T}\exp\left[-\frac{\phi}{k_B\hat{T}}\right]\frac{\mathrm{d}R}{\mathrm{d}s}(1-\mathcal{G}_\parallel). \tag*{(87)}

Equation (C36) shows explicitly that the departure from total pressure balance is associated with the spatial evolution of RR. In particular, the single-temperature model satisfies the pressure-balance equation exactly whenever RR is spatially constant. In the collisionless limit, R=1R = 1 everywhere and therefore dR/ds=0dR/ds = 0. Equation (C36) immediately gives Rp=0R_{\mathrm{p}} = 0, showing that the collisionless single-temperature solution is an exact stationary solution of the parallel momentum equation, including the effects of magnetic-field inhomogeneity. The equilibrium equation is also recovered in the absence of magnetic-field inhomogeneity. For a constant-cross-section flux tube, B(s)=B0B(s) = B_0. Finally, the same result is recovered in the strongly collisional limit, where R=0R = 0. In this case, Equation (C36) immediately yields RP=0R_{\mathrm{P}} = 0. A finite residual arises only when the magnetic-field inhomogeneity and a spatially evolving RR are simultaneously present. This residual is therefore a specific consequence of the reduced model adopted to describe the collisional population of the velocity-space domain that is disconnected from the lower boundary in the collisionless mapping.

References

  1. [1]Aschwanden, M. J. 2005, Physics of the Solar Corona. An Introduction with Problems and Solutions (2nd edition) (Publishing Ltd., Chichester, UK; Springer, New York, Berlin)
  2. [2]Ayaz, S., Li, G., & Khan, I. A. 2024, The Astrophysical Journal, 970, 140, doi: 10.3847/1538-4357/ad5bdcDOI
  3. [4]Ayaz, S., Zank, G. P., Khan, I. A., et al. 2025b, Monthly Notices of the Royal Astronomical Society, 540, 3583, doi: 10.1093/mnras/staf952DOI
  4. [5]Ayaz, S., Zank, G. P., Khan, I. A., et al. 2026a, Journal of Geophysical Research: Space Physics, 131, e2025JA034989, doi: https://doi.org/10.1029/2025JA034989
  5. [7]Banik, U., & Bhattacharjee, A. 2026, Non-thermal particle acceleration in multi-species kinetic plasmas: universal power-law distribution functions and temperature inversion in the solar corona, arXiv, doi: 10.48550/ARXIV.2601.03344DOI
  6. [8]Baratashvili, T., Poedts, S., Lani, A., & Linker, J. A. 2026, Astronomy & Astrophysics, doi: 10.1051/0004-6361/202660324DOI
  7. [9]Baratashvili, T., Brchnelova, M., Linan, L., Lani, A., & Poedts, S. 2024, A&A, 690, A184, doi: 10.1051/0004-6361/202449389DOI
  8. [10]Barbieri, L. 2025, Journal of Plasma Physics, 91, E135, doi: 10.1017/S0022377825100810DOI
  9. [11]Barbieri, L., Casetti, L., Verdini, A., & Landi, S. 2024a, Astron. Astrophys., 681, L5, doi: 10.1051/0004-6361/202348373DOI
  10. [13]Barbieri, L., & Démoulin, P. 2025, A&A, 704, A84, doi: 10.1051/0004-6361/202557356DOI
  11. [14]Barbieri, L., Démoulin, P., & Pantellini, F. 2026a, Advances in Space Research, doi: https://doi.org/10.1016/j.asr.2026.10.043
  12. [15]Barbieri, L., Démoulin, P., & Versch­aren, D. 2026b, The Astrophysical Journal, 1010, 192, doi: 10.3847/1538-4357/ae a986
  13. [16]Barbieri, L., Démoulin, P., & Versch­aren, D. 2026c, Collisionless stationary states of a stratified plasma in an expanding magnetic tube with stochastic heating, https://arxiv.org/abs/2607.21313
  14. [19]Berghmans, D., Auchère, F., Long, D. M., et al. 2021, Astron. Astrophys., 656, L4, doi: 10.1051/0004-6361/202140380DOI
  15. [20]Bian, N. H., & Kontar, E. P. 2011, A&A, 527, A130, doi: 10.1051/0004-6361/201015385DOI
  16. [21]Bian, N. H., Kontar, E. P., & Brown, J. C. 2010, A&A, 519, A114, doi: 10.1051/0004-6361/201014048DOI
  17. [22]Bose, S., De Pontieu, B., Hansteen, V., et al. 2024, Nature Astronomy, 8, 697–705, doi: 10.1038/s41550-024-02241-8DOI
  18. [23]Chandran, B. D. G. 2005, Phys. Rev. Lett., 95, 265004, doi: 10.1103/PhysRevLett.95.265004DOI
  19. [24]Chandran, B. D. G. 2021, Journal of Plasma Physics, 87, 905870304, doi: 10.1017/S0022377821000052DOI
  20. [25]Chandran, B. D. G., Li, B., Rogers, B. N., Quataert, E., & Germaschewski, K. 2010, The Astrophysical Journal, 720, 503, doi: 10.1088/0004-637X/720/1/503DOI
  21. [26]Dahlburg R. B., Einaudi, G., Rappazzo, A. F., & Velli, M. 2012, A&A, 544, L20, doi: 10.1051/0004-6361/201219752DOI
  22. [27]Del Zanna, G., & Mason, H. E. 2018, Living Rev. Sol. Phys., 15, doi: 10.1007/s41116-018-0015-3DOI
  23. [28]Démoulin, P., Mandrini, C. H., Rovira, M. G., Hénoux, J. C., & Machado, M. E. 1994, SoPh, 150, 221, doi: 10.1007/BF00712887DOI
  24. [29]Dmitruk, P., & Gomez, D. O. 1997, Astrophysical Journal Letters v.484, 484, L83, doi: 10.1086/310760DOI
  25. [30]Dolliou, A., Klimchuk, J. A., Parenti, S., & Bocchialini, K. 2025, Astron. Astrophys., 699, A61, doi: 10.1051/0004-6361/202554451DOI
  26. [31]Dolliou, A., Parenti, S., & Bocchialini, K. 2024, A&A, 688, A77, doi: 10.1051/0004-6361/202450439DOI
  27. [32]Dolliou, A., Parenti, S., Auchère, F., et al. 2023, Astron. Astrophys., 671, A64, doi: 10.1051/0004-6361/202244914DOI
  28. [33]Dowdy, J. F., Rabin, D., & Moore, R. L. 1986, Solar Physics, 105, 35–45, doi: 10.1007/bf00156374DOI
  29. [34]Dudík, J., Polito, V., Dzifčáková, E., Del Zanna, G., & Testa, P. 2017, Astrophys. J., 842, 19, doi: 10.3847/1538-4357/aa71a8DOI
  30. [35]Gabriel, A. H. 1976, Philosophical Transactions of the Royal Society of London, Series A: Mathematical and Physical Sciences, 281, 339, doi: 10.1098/rsta.1976.0031
  31. [36]Golub, L., & Pasachoff, J. M. 2009, The Solar Corona, 2nd edn. (Cambridge: Cambridge University Press)
  32. [37]Gudiksen, B. V., & Nordlund, Å. 2005, Astrophys. J., 618, 1020, doi: 10.1086/426063DOI
  33. [38]Harra, L., Barczynski, K., Auchère, F., et al. 2025, Space Science Reviews, 221, doi: 10.1007/s11214-025-01177-3DOI
  34. [39]Hau, L.-N., Chang, C.-K., Lazar, M., & Poedts, S. 2025, The Astrophysical Journal, 981, 18, doi: 10.3847/1538-4357/ada76fDOI
  35. [40]Heyvaerts, J., & Priest, E. R. 1983, Astron. Astrophys., 117, 220
  36. [41]Huang Z., Ter­iaca, L., Aznar Cuadrado, R., et al. 2023, aap, 673, A82, doi: 10.1051/0004-6361/202345988DOI
  37. [42]Ions­on, J. A. 1978, Astrophys. J., 226, 650, doi: 10.1086/156648DOI
  38. [43]Jockers, K. 1970, Astron. Astrophys., 6, 219
  39. [44]Johnston, C. D., Daldorff, L. K. S., Klimchuk, J. A., et al. 2025, The Astrophysical Journal, 994, 139, doi: 10.3847/1538-4357/ae08a2DOI
  40. [45]Judge, P. 2021, The Astrophysical Journal, 914, 70, doi: 10.3847/1538-4357/abf8adDOI
  41. [46]Klimchuk, J. A. 2006, Solar Physics, 234, 41, doi: 10.1007/s11207-006-0055-zDOI
  42. [47]Klimchuk, J. A. 2015, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 373, 20140256, doi: 10.1098/rsta.2014.0256DOI
  43. [48]Lamy, H., Pierrard, V., Maksimovic, M., & Lemaire, J. F. 2003, Journal of Geophysical Research (Space Physics), 108, 1047, doi: 10.1029/2002JA009487DOI
  44. [49]Lazar, M., & Fichtner, H. 2021, Kappa Distributions: From Observational Evidences Via Controversial Predictions to a Consistent Theory of Nonequilibrium Plasmas, Astrophysics and space science library (Springer)
  45. [50]Lemaire, J., & Scherer, M. 1971, J. Geophys. Res., 76, 7479, doi: 10.1029/JA076i031p07479DOI
  46. [51]Maksimovic, M., Pierrard, V., & Lemaire, J. F. 1997, Astron. Astrophys., 324, 725
  47. [52]Mandrini, C. H., Démoulin, P., & Klimchuk, J. A. 2000, The Astrophysical Journal, 530, 999, doi: 10.1086/308398DOI
  48. [53]Marsch, E., Vocks, C., & Tu, C.-Y. 2003, Nonlinear Processes in Geophysics, 10, 101, doi: 10.5194/npg-10-101-2003DOI
  49. [54]Mason, J. P., Werth, A., West, C. G., et al. 2023, The Astrophysical Journal, 948, 71, doi: 10.3847/1538-4357/accc89DOI
  50. [55]Meyer-Vernet, N. 2007, Basics of the Solar Wind, Cambridge Atmospheric and Space Science Series (Cambridge University Press)
  51. [56]Neslušan, L. 2001, A&A, 372, 913
  52. [57]Pannekoek, A. 1922, Bull. Astr. Inst. Netherland, 1, 107
  53. [58]Parenti, S. 2025, Small EUV Brightenings in the Quiet Solar Atmosphere: New Insights from the Solar Orbiter Mission, https://arxiv.org/abs/2512.07286
  54. [59]Parker, E. N. 1958, Astrophys. J., 128, 664, doi: 10.1086/146579DOI
  55. [60]Parker, E. N. 1972, Astrophysical Journal, 174, 499, doi: 10.1086/151512DOI
  56. [61]Pierrard, V., & Lemaire, J. 1996, Journal of Geophysical Research: Space Physics, 101, 7923, doi: https://doi.org/10.1029/95JA03802
  57. [62]Pierrard, V., & Lemaire, J. 2001, Journal of Atmospheric and Solar-Terrestrial Physics, 63, 1261, doi: https://doi.org/10.1016/S1364-6826(00)00227-3
  58. [63]Pierrard, V., & Pieters, M. 2014, Journal of Geophysical Research: Space Physics, 119, 9441, doi: https://doi.org/10.1002/2014JA020678
  59. [64]Pierrard, V., & Stegen, K. 2008, Journal of Geophysical Research: Space Physics, 113, doi: https://doi.org/10.1029/2008JA013060
  60. [65]Péters de Bonhome, M., Pierrard, V., & Bacchini, F. 2025, Astronomy & Astrophysics, 697, A104, doi: 10.1051/0004-6361/202554250
  61. [66]Rappazzo, A. F., & Parker, E. N. 2013, Astrophys. J. Lett., 773, L2, doi: 10.1088/2041-8205/773/1/L2DOI
  62. [67]Rappazzo, F., Velli, M., Einaudi, G., & Dahlburg, R. B. 2008, Astrophys. J., 677, 1348, doi: 10.1086/528786DOI
  63. [68]Reale, F. 2010, Living Reviews in Solar Physics, 7, doi: 10.12942/lrsp-2010-5
  64. [69]Rosseland, S. 1924, MNRAS, 84, 720, doi: 10.1093/mnras/84.9.720DOI
  65. [70]Scudder, J. D. 1992a, Astrophys. J., 398, 299, doi: 10.1086/171858DOI
  66. [72]Solanki, S. K., Steiner, O., & Uitenbroeck, H. 1991, A&A, 250, 220
  67. [73]Sow Mondal, S., Daldorff, L. K. S., Klimchuk, J. A., & Johnston, C. D. 2025, The Astrophysical Journal, 994, 71, doi: 10.3847/1538-4357/ae0cacDOI
  68. [74]Usmanov, A. V., Chhiber, R., Matthaeus, W. H., Roy, S., & Goldstein, M. L. 2025, The Astrophysical Journal, 993, 87, doi: 10.3847/1538-4357/ae019cDOI
  69. [75]Van Doorsselaere, T., Srivastava, A. K., Antolin, P., et al. 2020, Space Science Reviews, 216, doi: 10.1007/s11214-020-00770-yDOI
  70. [76]Vinogradov, A., Lazar, M., Zouganélis, I., Pierrard, V., & Poedts, S. 2026, Journal of Geophysical Research: Space Physics, 131, e2025JA034770, doi: https://doi.org/10.1029/2025JA034770
  71. [77]Vocks, C. 2002, The Astrophysical Journal, 568, 1017, doi: 10.1086/338884
  72. [78]Vocks, C. 2021, in Astrophysics and Space Science Library, Vol. 464, Kappa Distributions; From Observational Evidences via Controversial Predictions to a Consistent Theory of Nonequilibrium Plasmas, ed. M. Lazar & H. Fichtner, 125–143, doi: 10.1007/978-3-030-82623-9_7
  73. [79]Vocks, C., & Marsch, E. 2001, Geophysical Research Letters, 28, 1917, doi: https://doi.org/10.1029/2000GL012764
  74. [80]Vocks, C., & Marsch, E. 2002, The Astrophysical Journal, 568, 1030, doi: 10.1086/338885DOI
  75. [81]Yalim, M. S., Zank, G. P., & Asgari-Targhi, M. 2023, The Astrophysical Journal, 944, 119, doi: 10.3847/1538-4357/acb151DOI
  76. [82]Young, P. R., Tian, H., Peter, H., et al. 2018, Space Sci. Rev., 214
  77. [83]Zhukov A. N., Mierla, M., Auchère, F., et al. 2021, A&A, 656, A35, doi: 10.1051/0004-6361/202141010DOI
  78. [84]Zouganelis, I., Maksimovic, M., Meyer-Vernet, N., Lamy, H., & Issautier, K. 2004, Astrophys. J., 606, 542, doi: 10.1086/382866

Paper details

vlnc:W_zsxqdz84
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 1

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents