This paper extends the distributed rolling contact FrBD framework to linear viscoelasticity by considering classic derivative Generalised Maxwell and Kelvin-Voigt rheological representations of the bristle element. With this modelling approach, the dynamics of the bristle, generated friction forces, and internal deformation states are described by a system of 2(n+1) hyperbolic partial differential equations (PDEs), which can capture complex relaxation phenomena originating from viscoelastic behaviours. By appropriately specifying the analytical expressions for the transport and rigid relative velocity, three distributed formulations of increasing complexity are introduced, which account for different levels of spin excitation. For the linear variants, well-posedness and passivity are analysed rigorously, showing that these properties hold for any physically meaningful parametrisation. Numerical experiments complement the theoretical results by illustrating steady-state characteristics and transient relaxation effects. The findings of this paper substantially advance the FrBD paradigm by enabling a unified and systematic treatment of linear viscoelasticity.
Introduction
Rolling contact phenomena are ubiquitous in mechanical and mechatronics engineering [1, 2, 3], where they play a pivotal role in railway and road vehicle dynamics [4, 5, 6, 7, 8, 9, 10, 11], robotics [12, 13, 14, 15, 16, 17, 18], and tribology [19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29]. Given the central role of rolling contact mechanics in engineering practice, it is unsurprising that a rich body of analytical theories has emerged to model and elucidate these phenomena. Early contributions include those of Bentall and Johnson [30] and Nowell and Hills [31], who studied numerically the two-dimensional tractive rolling contact problem between elastically dissimilar rollers. Within the framework of linear elasticity, a comprehensive analytical treatment of rolling contact was then pioneered by Kalker, who formulated his famous theory combining rolling kinematics with a local Coulomb-Amontons friction law. Restricting attention to elastically similar cylinders undergoing longitudinal slip (or creepage) under dry friction, Kalker examined both steady and unsteady rolling behaviours in [32, 33, 34]. In the two-dimensional case, viscoelastic rolling was subsequently investigated independently by Hunter [35] and Goryacheva [36], whilst numerical approaches capable of addressing fully three-dimensional contact problems were developed by Kalker [37, 38]. Most of these studies considered viscoelastic materials characterised by a single relaxation time, which can be effectively represented by a linear elastic solid rheological model. These pioneering contributions, comprehensively documented in standard references [5, 39, 40, 41], are now recognised as cornerstones of contact mechanics and have inspired the development of numerous numerical algorithms aimed at solving more complex rolling problems involving combined translational and spin slips [42, 43, 44, 45, 46, 47]. Indeed, although elegant analytical solutions exist for steady or quasi-steady rolling [48], the inherently nonlocal nature of Kalker’s theory renders the derivation of closed-form results intractable, particularly when viscoelastic effects are incorporated [49, 50, 51, 52, 53, 54].
Alternatively, Kalker’s simplified theory – also known as the brush models in road vehicle dynamics – offers a qualitatively valid alternative by replacing the full Cerruti-Boussinesq coupling with a Winkler-type foundation, postulating a local relationship between stresses and deformations [5, 39, 55]. Following this approach, analytical solutions are reported, for instance, in [9, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68]. Despite their success, conventional brush models exhibit a significant drawback, since they rely on an explicit partition of the contact region into adhesion and sliding zones. When rolling contact is described as a spatially distributed process, this feature severely hampers the derivation of general analytical results, complicates rigorous mathematical analysis, and limits compatibility with control and estimation frameworks. Motivated by these shortcomings, alternative formulations of rolling and spinning friction have been proposed. For instance, the local models introduced in [69, 70, 71, 72] compute resultant friction forces and moments by employing rigid rolling kinematics, leading to compact expressions for global quantities. In parallel, dynamic friction models such as Dahl and LuGre [73, 74, 75] have been adapted to rolling contact problems, with an emphasis on tyre-road applications [76, 77, 78, 79, 80, 81, 82], where viscoelastic effects may be non-negligible. These approaches do not explicitly distinguish between sticking and slipping, as they describe only the averaged deformation of bristle-like elements within the contact interface. This feature endows them with a mathematical structure that is more amenable to analysis and control design. Comparable modelling philosophies can also be pursued starting from other dynamic friction frameworks, including Leuven-type formulations [83, 84] and elastoplastic descriptions [85, 86]. Nevertheless, the majority of these models remain largely phenomenological and thus offer limited insight into the physical mechanisms governing friction.
More recently, lumped and distributed LuGre-inspired formulations, termed Friction with Bristle Dynamics (FrBD), have been proposed in [87, 88] as a first-order approximation of a rheological model for bristle-like elements attached to sliding and rolling bodies. Owing to its physical grounding, the FrBD framework yields a coherent dynamic description of sliding phenomena under both dry and lubricated friction. In particular, the first-order version presented in [88], renamed in this paper the rolling contact FrBD1-KV model, was based on a Kelvin-Voigt (KV) rheological representation of the bristle element, which qualifies as the simplest constitutive model of a linear viscoelastic solid [89, 90, 91, 92]. Consequently, the formulation presented in [88] is suitable for studying purely elastic rolling contact, or viscoelastic contact when hysteretic effects are minor. However, for highly viscoelastic materials, such as the polymers commonly used in tyres, more sophisticated rheological models are necessary [93, 94, 95] to capture internal stress relaxation across a broad frequency spectrum [96, 97, 98, 99, 100, 101]. Therefore, restricting itself to the classic derivative framework [89, 99, 100, 101], the present work advances the distributed FrBD paradigm by adopting the two most general constitutive descriptions of linear viscoelasticity, namely the Generalised Maxwell (GM) and Generalised Kelvin-Voigt (GKV) elements, thereby substantially extending the modelling capability of the approach. The governing PDEs of the new rolling contact models, collectively referred to as FrBDn+1, are first derived following the general approach outlined in [88]. Subsequently, three distinct variants are presented and discussed in detail. For the two linear formulations, well-posedness, input-to-state stability (ISS), and input-to-output stability (IOS) results can be established by invoking semigroup arguments [102, 103, 104] as in [88], and are briefly recollected. Conversely, passivity is proved explicitly, showing that this property holds for any meaningful parametrisation of the models. The theoretical developments are complemented by numerical simulations illustrating steady-state and transient rolling contact behaviours. Force-slip relationships are computed and compared employing three different rheological descriptions, whilst transient analyses focus on relaxation dynamics. Compared to [88], the main novelties of this work can be summarised as follows:
Systematic extension of FrBDn+1 to arbitrary-order linear viscoelasticity via GM and GKV models,
Derivation of distributed hyperbolic PDEs with internal relaxation states,
Rigorous passivity proof for rolling contact with viscoelastic bristles.
From an engineering perspective, the proposed FrBDn+1 models enable the direct incorporation of experimentally identified relaxation spectra of polymers and rubbers into rolling contact simulations, without resorting to ad hoc creep-force laws. Beyond automotive tyres, the results of this paper apply to a wide range of rolling contact elements involving viscoelastic materials, such as rubber-coated rollers used in conveying, printing, and paper-handling machinery, drive and pinch rollers in packaging and mechatronic systems, and polymer-covered calendering cylinders in plastics and rubber processing.
The remainder of the manuscript is organised as follows. Section 2 presents the derivation of the FrBDn+1 formulations, combining physically motivated assumptions with solid analytical arguments. Section 3 specialises the general equations to rolling contact systems and introduces three model variants of increasing complexity. The linear formulations are then analysed in Sect. 4, with particular emphasis on well-posedness and passivity properties. Numerical results illustrating both steady and transient responses are discussed in Sect. 5. Finally, conclusions and directions for future research are outlined in Sect. 6, whilst additional details are provided in Appendices A and B. Specifically, to facilitate practical adoption, Appendix A provides guidelines for parametrising the proposed FrBDn+1 models from experimental frequency-domain data, whereas alternative parametrisations of certain variants are given in Appendix B.
Notation
In this paper, R denotes the set of real numbers; R>0 and R≥0 indicate the set of positive real numbers excluding and including zero, respectively. The set of positive integer numbers is indicated with N, whereas N0 denotes the extended set of positive integers including zero, i.e., N0=N∪{0}. The set of n×m matrices with values in F (F=R, R>0, R≥0) is denoted by Mn×m(F) (abbreviated as Mn(F) whenever m=n). Symn(R) represents the group of symmetric matrices with values in R; the identity matrix on Rn is indicated with In. A positive-definite matrix is noted as Mn(R)∋Q≻0; a positive semidefinite one as Mn(R)∋Q⪰0. The standard Euclidean norm on Rn is indicated with ∥⋅∥2; operator norms are simply denoted by ∥⋅∥. Given a domain Ω with closure Ω, Lp(Ω;Z) and Ck(Ω;Z) (p,k∈{1,2,…,∞}) denote respectively the spaces of Lp-integrable functions and k-times continuously differentiable functions on Ω with values in Z (for T=∞, the interval [0,T] is identified with R≥0). In particular, L2(Ω;Rn) denotes the Hilbert space of square-integrable functions on Ω with values in Rn, endowed with inner product ⟨ζ1,ζ2⟩L2(Ω;Rn)=∫Ωζ1(x)Tζ2(x)dx and induced norm ∥ζ(⋅)∥L2(Ω;Rn).
The Hilbert space H1(Ω;Rn) consists of functions ζ∈L2(Ω;Rn) whose weak derivative also belongs to L2(Ω;Rn). For a function f:Ω→R, the sup norm is defined as ∥f(⋅)∥∞≜esssupΩ∣f(⋅)∣; f:Ω→R belongs to the space L∞(Ω;R) if ∥f(⋅)∥∞<∞. A function f∈C0(R≥0;R≥0) belongs to the space K if it is strictly increasing and f(0)=0; f∈K belongs to the space K∞ if it is unbounded. Finally, a function f∈C0(R≥02;R≥0) belongs to the space KL if f(⋅,t)∈K and is strictly decreasing in its second argument, with limt→+∞f(⋅,t)=0.
Viscoelastic extension of the two-dimensional FrBD friction model
This section presents an extended version of the two-dimensional FrBD friction model introduced in [88], based on more refined GM and GKV rheological descriptions of the bristle element. In particular, the proposed rheological models are described in Sect. 2.1, whilst Sect. 2.2 is devoted to the analytical derivation of the dynamic one.
Viscoelastic rheological models
Following [88], the proposed approach is elucidated by first considering the configuration illustrated in Figure 1(a), where a viscoelastic body slides over a flat, rigid substrate. The mechanical problem is studied in a reference frame (O;x,y,z) oriented as follows: the x-axis (longitudinal) is usually directed as the main direction of motion of the upper body, the z-axis (vertical) points downward, into the lower body, and the y-axis (lateral) is oriented so to have a right-handed system.
Image not extracted
Figure 1. A schematic representation of the friction model: (a) configuration with a rigid substrate; (b) configuration with a deformable substrate. The problem is studied in a right-handed reference frame (O;x,y,z) with unit vectors (e^x,e^y,e^z).
The rigid relative velocity of the upper body with respect to the rigid substrate (lower body) is denoted by R2∋vr=[vrxvry]T. To the lower boundary of the upper body, massless bristles are attached, whose deformation is denoted by R2∋z=[zxzy]T (not to be confounded with the vertical axis z). The total sliding velocity between the tip of the bristle and the substrate reads
vs(z˙,vr)=vr+z˙,(1)
where Newton’s notation has been adopted for the total time derivative z˙=dtdz. By deflecting, the bristle generates a nondimensional force R2∋f=[fxfy]T, which opposes the sliding motion. The (possibly dynamic) relationship between the deformation and the produced force may be specified by adopting an appropriate rheological model for the bristle element. Within the framework of linear viscoelasticity, as considered in this paper, the two most general formulations are the GM and GKV models illustrated in Figure 2. These two models are ultimately equivalent, meaning that every GM element admits an equivalent GKV representation, and vice versa[97]. However, this paper considers each formulation separately to provide a unified and more comprehensive treatment of linear viscoelasticity within the theoretical FrBD framework3. Starting with the GM element with n+1 branches, depicted in Figure 2(a), the force f may be expressed as
[2]Marques F, Flores P, Claro JCP, et al. Modeling and analysis of friction including rolling effects in multibody dynamics: a review. Multibody Syst Dyn 45:223–244 (2019). Available from: https://doi.org/10.1007/s11044-018-09640-6.
[3]Marques F, Flores P, Pimenta Claro JC, Lankarani HM. A survey and comparison of several friction force models for dynamic analysis of multibody mechanical systems. Nonlinear Dyn 86(3):1407–1443 (2016). Available from: https://doi.org/10.1007/s11071-016-2999-3.
[6]Kalker JJ. Rolling Contact Phenomena. In: Jacobson B, Kalker JJ (eds) Rolling Contact Phenomena. International Centre for Mechanical Sciences, vol. 411. Springer, Vienna (2000).
[10]Zhang M, Unrau HJ, Gießler M, Gauterin F. Tire tread wear characteristics: insights from indoor experiments and analytical modeling. Tribology International 10 (2025). Available from: https://doi.org/10.1016/j.triboint.2025.110752.
[11]Zhang M, Unrau HJ, Gießler M, Gauterin F. A detailed tire tread friction model considering dynamic friction states. Tribology International 193 (2024). Available from: https://doi.org/10.1016/j.triboint.2024.109342.
[12]Zheng M, Zhan Q, Liu J, Cai Y. Control of a spherical robot: path following based on nonholonomic kinematics and dynamics. Chinese Journal of Aeronautics 23(3):337–345 (2011). Available from: https://doi.org/10.1016/S1000-9361(11)60040-X.
[13]Karavaev YL, Kilin AA. Dynamics and control of a spherical robot with an internal omni-wheel platform. Regul Chaot Dyn 20:134–152 (2015). Available from: https://doi.org/10.1134/S1560354715020033.
[14]Ba PD, Dong Hoang Q, Lee SG, Nguyen TH, Quang Duong X, Tham BC. Kinematic modeling of spherical rolling robots with a three-omnidirectional-wheel drive mechanism. Proc. 20th Int. Conf. Control, Automation and Systems (ICCAS), 463–466 (2020). Available from: https://doi.org/10.23919/ICCAS50221.2020.9268200.
[15]Ghariblu H, Mohammadi H. Structure and dynamic modelling of a spherical robot. Proc. 8th Int. Symp. Mechatronics and Its Applications, 1–5 (2012). Available from: https://doi:10.1109/ISMA.2012.6215159.DOI
[16]Hogan FR, Forbes JR. Modeling of spherical robots rolling on generic surfaces. Multibody Syst Dyn 35:91–109 (2015). Available from: https://doi.org/10.1007/s11044-014-9438-3.
[17]Zhuang W, Liu X, Fang C, Sun H. Dynamic modeling of a spherical robot with arms using Kane’s method. Proc. 4th Int. Conf. Natural Computation, 373–377 (2008). Available from: https://doi:10.1109/ICNC.2008.595.
[18]Moazami S, Zargarzadeh H, Palanki S. Kinematics of spherical robots rolling over 3D terrains. Complexity, 14 pages (2019). Available from: https://doi.org/10.1155/2019/7543969.
[19]Yildiz Y, Piccininni A, Bottiglione F, Carbone G. Modeling chain continuously variable transmission for direct implementation in transmission control. Mechanism and Machine Theory 105:428–440 (2016). Available from: https://doi.org/10.1016/j.mechmachtheory.2016.07.015.
[20]Duan C, Hebbale K, Liu F, Yao J. Physics-based modeling of a chain continuously variable transmission. Mechanism and Machine Theory 105:397–408 (2016). Available from: https://doi.org/10.1016/j.mechmachtheory.2016.07.018.
[21]Kumaran VU, Weiss L, Zogg M, Wegener K. Analytical flat belt drive model considering bilinear elastic behaviour with residual strains. Mechanism and Machine Theory 190 (2023). Available from: https://doi.org/10.1016/j.mechmachtheory.2023.105466.
[22]Frendo F, Bucchi F. “Brush model” for the analysis of flat belt transmissions in steady-state conditions. Mechanism and Machine Theory 143:103653 (2020). Available from: https://doi.org/10. 1016/j.mechmachtheory.2019.103653.
[23]Frendo F, Bucchi F. Enhanced brush model for the mechanics of power transmission in flat belt drives under steady-state conditions: effect of belt elasticity. Mechanism and Machine Theory 153:103998 (2020). Available from: https://doi.org/10.1016/j.mechmachtheory.2020.103998.
[24]Bucchi F, Frendo F. Validation of the brush model for the analysis of flat belt transmissions in steady-state conditions by finite element simulation. Mechanism and Machine Theory 167:104556 (2022). Available from: https://doi.org/10.1016/j.mechmachtheory.2021.104556.
[25]Santeramo M, Putignano C, Vorlaufer G, Krenn S, Carbone G. Viscoelastic steady-state rolling contacts: a generalized boundary element formulation for conformal and non-conformal geometries. Journal of the Mechanics and Physics of Solids 171 (2023). Available from: https://doi.org/10.1016/j.jmps.2022.105129.
[26]Sawalhi N, Randall RB. Simulating gear and bearing interactions in the presence of faults: Part I. The combined gear–bearing dynamic model and the simulation of localised bearing faults. Mech Syst Signal Process 22(8):1924–1951 (2008). Available from: https://doi.org/10.1016/j.ymssp.2007.12.001.
[27]Abboud D, Elbadaoui M, Smith WA, Randall RB. Advanced bearing diagnostics: a comparative study of two powerful approaches. Mech Syst Signal Process 114:604–627 (2019). Available from: https://doi.org/10.1016/j.ymssp.2018.05.011.
[28]Liu Y, Yan C, Shi J, et al. Nonlinear dynamic analysis of supporting bearings in a rotor–bearing system considering vibration interaction. Nonlinear Dyn 113:22435–22458 (2025). Available from: https://doi.org/10.1007/s11071-025-11350-6.
[29]Zeng Q, Liu Y, Du W, et al. Dynamic characteristic analysis of a gear–rotor–bearing coupling system considering bearing fit. Nonlinear Dyn 113:2131–2154 (2025). Available from: https://doi.org/10.1007/s11071-024-10290-x.
[30]Bental R, Johnson K. Slip in the rolling contact of two dissimilar elastic rollers. Int J Mech Sci 9:389-404 (1967).
[31]Nowell D, Hills D. Tractive rolling of dissimilar elastic cylinders. Int J Mech Sci 30:427-439 (1988).DOI
[32]Kalker JJ. Transient phenomena in two elastic cylinders rolling over each other with dry friction. J Appl Mech 37(3):677–688 (1970). Available from: https://doi.org/10.1115/1.3408597.
[34]Kalker JJ. On the Rolling Contact of Two Elastic Bodies in the Presence of Dry Friction. PhD thesis, TH Delft (1967).DOI
[35]Hunter SC. The rolling contact of a rigid cylinder with a viscoelastic half space. Trans. ASME, Ser. E, J. Appl. Mech. 28:611–617 (1961).DOI
[36]Goryacheva I. Contact problem of rolling of a viscoelastic cylinder on a base of the same material. J. Appl. Math. Mech. 37(5), 925933 (1973). Available from: https://doi.org/10.1016/0021-8928(73)90017-8.
[37]Panek C, Kalker JJ. Three-dimensional Contact of a Rigid Roller Traversing a Viscoelastic Half Space. J. Inst. Maths Applies 26:299-313 (1980).DOI
[38]Kalker JJ. Viscoelastic Multilayered Cylinders Rolling With Dry Friction. ASME. J. Appl. Mech. September 58(3):666–679 (1991). Available from: https://doi.org/10.1115/1.2897247
[42]Vollebregt EAH. User Guide for CONTACT. Technical report TR09-03 (version 13).
[43]Vollebregt EAH, Wilders P. FASTSIM2: a second-order accurate frictional rolling contact algorithm. Comput Mech 47:105–116 (2011). Available from: https://doi.org/10.1007/s00466-010-0536-7.
[44]Vollebregt EAH, Iwnicki SD, Xie G, Shackleton P. Assessing the accuracy of simplified frictional rolling contact algorithms. Veh Syst Dyn 50(1):1–17 (2012). Available from: https://doi.org/10.1080/00423114.2011.552618.
[45]Vollebregt EAH. Numerical modeling of measured railway creep–force curves with CONTACT. Wear 314:87–95 (2014). Available from: https://doi.org/10.1016/j.wear.2013.11.030.
[46]Nielsen JB. New Developments in the Theory of Wheel/Rail Contact Mechanics. PhD thesis, Technical University of Denmark (1998). Available from: https://orbit.dtu.dk/en/publications/ new-developments-in-the-theory-of-wheelrail-contact-mechanics.
[47]Dahlberg J, Alfredsson B. Transient rolling of cylindrical contacts with constant and linearly increasing applied slip. Wear 266:316–326 (2009). Available from: https://doi.org/10.1016/j.wear.2008.07.008.
[49]Goryacheva I, Sadeghi F. Contact characteristics of a rolling/sliding cylinder and a viscoelastic layer bonded to an elastic substrate. Wear 184 (2):125-132 (1995). Available from: https://doi.org/10.1016/0043-1648(94)06561-6.
[50]Goryacheva IG, Yakovenko AA: Indentation of a rigid cylinder with a flat rough base into a thin viscoelastic layer. J. Appl. Mech. Tech. Phys., 62(5):723–735 (2021).
[51]Goryacheva IG, Gubenko MM, Makhovskaya YY. Sliding of a spherical indenter on a viscoelastic foundation with the forces of molecular attraction taken into account. Prikl. J. Appl. Mech. Tech. Phys., 55(1):81–88 (2014).DOI
[52]Güler MA, Alinia Y, Adibnazari S. On the rolling contact problem of two elastic solids with graded coatings. Int J Mech Sci 64:62–81 (2012).DOI
[53]Juliá JM, Rodríguez-Tembleque L. Subsurface stress evolution under orthotropic wear and frictional contact conditions. Int J Mech Sci 234:107695 (2022).DOI
[54]Juliá JM, Rodríguez-Tembleque L. Wear and subsurface stress evolution in tractive rolling contact. Int J Mech Sci 294, 110195, ISSN 0020-7403 (2025).DOI
[55]Kalker JJ. Simplified theory of rolling contact. Delft Progress Report, Series C (1973), 1–10.
[56]Kalker JJ. Railway wheel and automotive tyre. Veh Syst Dyn 5(15):255–269 (1979).
[57]Knothe K, Groß-Thebing A. Short-wavelength rail corrugation and non-steady-state contact mechanics. Veh Syst Dyn 46(1–2):49–66 (2008). Available from: https://doi.org/10.1080/00423110701590180.
[58]Alonso A, Giménez JG. Non-steady-state modelling of wheel–rail contact for dynamic simulation of railway vehicles. Veh Syst Dyn 46(3):179–196 (2008). Available from: https://doi.org/10.1080/00423110701248011.
[59]Guiral A, Alonso A, Baeza L, Giménez JG. Non-steady-state modelling of wheel–rail contact. Veh Syst Dyn 51(1):91–108 (2013). Available from: https://doi.org/10.1080/00423114.2012.713499.
[60]Ciavarella M, Barber J. Influence of longitudinal creepage and wheel inertia on short-pitch corrugation. Proc IMechE Part J: Eng Tribol 222(3) (2008). Available from: https://doi.org/10.1243/13506501JET373.
[61]Afferrante L, Ciavarella M. Short-pitch rail corrugation: a resonance-free regime? Wear 266:9–10 (2008). Available from: https://doi.org/10.1016/j.wear.2008.12.003.
[62]Afferrante L, Ciavarella M. Short-pitch corrugation of railway tracks with wooden or concrete sleepers: an enigma solved? Tribol Int 43(3) (2010). Available from: https://doi.org/10.1016/j.triboint.2009.09.010.
[63]Al-Bender F, De Moerlooze K. A model of the transient behavior of tractive rolling contacts. Advances in Tribology (2008). Available from: https://doi.org/10.1155/2008/214894.
[65]Romano L, Timpone F, Bruzelius F, Jacobson B. Analytical results in transient brush tyre models: theory for large camber angles and classic solutions with limited friction. Meccanica 57:165–191 (2022). Available from: http://dx.doi.org/10.1007/s11012-021-01422-3.
[66]Romano L, Timpone F, Bruzelius F, Jacobson B. Rolling, tilting and spinning spherical wheels: analytical results using brush theory. Mechanism and Machine Theory 173:104836 (2022). Available from: https://doi.org/10.1016/j.mechmachtheory.2022.104836.
[67]Romano L, Bruzelius F, Jacobson B. An extended LuGre-brush tyre model for large camber angles and turning speeds. Veh Syst Dyn (2022). Available from: https://doi.org/10.1080/00423114.2022.2086887.
[68]Romano L, Maglio M, Bruni S. Transient wheel–rail rolling contact theories. Tribology International (2023).DOI
[69]Zhuravlev VP. The model of dry friction in the problem of rolling rigid bodies. J Appl Math Mech 62(5):705–710 (1998).DOI
[70]Zhuravlev VP. Friction laws in the case of combination of slip and spin. Mech Solids 38(4):52–58 (2003).
[71]Kireenkov AA. About the motion of a symmetric rigid solid on a plane. Proc. 8th Conf. DSTA, 95–102 (2005).
[72]Kireenkov AA. Combined model of sliding and rolling friction in the dynamics of bodies on a rough plane. Mech Solids 43(3):412–425 (2008).DOI
[73]Canudas-de-Wit C, Olsson H, Åström KJ, Lischinsky P. A new model for control of systems with friction. IEEE Trans Autom Control 40(3):419–425 (1995).DOI
[74]Olsson H. Control Systems with Friction. Doctoral thesis, Lund Institute of Technology (1996).
[75]Åström KJ, Canudas-de-Wit C. Revisiting the LuGre friction model. IEEE Control Syst Mag 28(6):101–114 (2008).
[76]Sorine M, Szymanski J. A new dynamic multi d.o.f. tire model. Transportation Systems 2000, Braunschweig (2000).DOI
[77]Canudas-de-Wit C, Tsiotras P. Dynamic tire friction models for vehicle traction control. Proc. 38th IEEE CDC, 3746–3751 (1999). Available from: https://doi:10.1109/CDC.1999.827937.
[78]Canudas-de-Wit C, Tsiotras P, Velenis E, et al. Dynamic friction models for road/tire longitudinal interaction. Veh Syst Dyn 39(3):189–226 (2003). Available from: https://doi:10.1076/vesd.39.3.189.41152.
[79]Velenis E, Tsiotras P, Canudas-de-Wit C, Sorine M. Dynamic tyre friction models for combined slip. Veh Syst Dyn 43:3–29 (2005). Available from: https://doi:10.1080/00423110412331290464.
[80]Deur J. Modeling and analysis of longitudinal tire dynamics based on the LuGre friction model. IFAC Proc Vol 34(1):91–96 (2001). Available from: https://doi.org/10.1016/S1474-6670(17)34383-5.
[82]Deur J, Ivanovic V, Troulis M, et al. Extensions of the LuGre tyre friction model for variable slip speed. Veh Syst Dyn 43(1):508–524 (2005). Available from: https://doi:10.1080/0042310500229808.
[83]Swevers J, Al-Bender F, Ganseman CG, Projogo T. An integrated friction model with improved presliding behavior. IEEE Trans Autom Control 45(4):675–686 (2000).
[84]Lampaert V, Swevers J, Al-Bender F. Modification of the Leuven integrated friction model. IEEE Trans Autom Control 47(4):683–687 (2002).DOI
[85]Dupont P, Armstrong B, Hayward V. Elasto-plastic friction model: contact compliance and stiction. Proc. 2000 American Control Conference, 1072–1077 (2000).DOI
[86]Dupont P, Hayward V, Armstrong B, et al. Single-state elasto-plastic friction models. IEEE Trans Autom Control 47:787–792 (2002).
[87]Romano L, Aamo OM, Åslund J, Frisk E. First-order friction models with bristle dynamics: lumped and distributed formulations, arXiv:2602.09429. Under review at IEEE Trans Control Syst Technol (2025).DOI
[88]Romano L. Two-dimensional FrBD friction models for rolling contact. Nonlinear Dyn (2026).
[89]Sakhnevyy A, Maglione R, Suero R, et al. Nonlinear mathematical modeling of frequency-temperature dependent viscoelastic materials for tire applications. Nonlinear Dyn 112:21729–21750 (2024). Available from: https://doi.org/10.1007/s11071-024-10175-z.
[91]Mark JE, Erman B, Roland M. The science and technology of rubber. Academic press, London (2013).
[92]Gutierrez-Lemini D. Engineering viscoelasticity. Springer, New York (2014).
[93]Wallace ER, Chaise T, Nelias D. Three-dimensional rolling/sliding contact on a viscoelastic layered half-space. Journal of the Mechanics and Physics of Solids 143, 104067 (2020).DOI
[94]Carbone G, Putignano P. A novel methodology to predict sliding and rolling friction of viscoelastic materials: Theory and experiments. Journal of the Mechanics and Physics of Solids 61(8):1822–1834 (2013).DOI
[95]Koumi KE, Chaise T, Nelias D. Rolling contact of a rigid sphere/sliding of a spherical indenter upon a viscoelastic half-space containing an ellipsoidal inhomogeneity. Journal of the Mechanics and Physics of Solids 80:1–25 (2015).DOI
[96]Serra-Aguila A, Puigoriol-Forcada JM, Reyes G, et al. Viscoelastic models revisited: characteristics and interconversion formulas for generalized Kelvin–Voigt and Maxwell models. Acta Mech. Sin. 35:1191–1209 (2019). Available from: https://doi.org/10.1007/s10409-019-00895-6.
[97]Loy RJ, de Hoog FR, Anderssen RS. Interconversion of Prony series for relaxation and creep. J. Rheol. 59, 1261–1270 (2015).DOI
[98]Xiao R, Sun H, Chen W. An equivalence between generalized Maxwell model and fractional Zener model, Mechanics of Materials 100:148–153 (2016). Available from: https://doi.org/10.1016/j.mechmat.2016.06.016.
[99]Shitikova M. Fractional operator viscoelastic models in dynamic problems of mechanics of solids: a review. Mech. solids 57:1–33 (2022).DOI
[100]Meral F, Royston T, Magin R. Fractional calculus in viscoelasticity: an experimental study. Commun. Nonlinear Sci. Numer. Simul. 15:939–945 (2010).DOI
[101]Wagner CE, Barbati AC, Engmann J, et al. Quantifying the consistency and rheology of liquid foods using fractional calculus. Food Hydrocoll. 69:242–254 (2017).DOI
[103]Tanabe H. Equations of Evolution. Pitman, London (1979).
[104]Tanabe H. Functional Analytic Methods for Partial Differential Equations. CRC Press (1997).
[105]Edwards CH. Advanced Calculus of Several Variables, Vol. III – Successive Approximations and Implicit Functions. Academic Press (1973).
[106]Bekesi BJ, Antali M, Csernák G. Phase portraits and bifurcations induced by static and dynamic friction models. Nonlinear Dyn 13:15863–15899 (2025). Available from: https://doi.org/10.1007/s11071-025-10974-y.
[108]Persson BNJ. Theory of rubber friction and contact mechanics. The Journal of Chemical Physics 115(8):3840–3861 (2001). Available from: https://doi.org/10.1063/1.1388626.
[110]Mavros G. A thermo-frictional tyre model including the effect of flash temperature. Vehicle System Dynamics, 57(5):721–751 (2019). Available from: https://doi.org/10.1080/00423114.2018.1484147.
[111]Takács D, Orosz G, Stépán G. Delay effects in shimmy dynamics of wheels with stretched string-like tyres. Eur J Mech A/Solids 28(3):516–525 (2009).DOI
[112]Takács D, Stépán G. Micro-shimmy of towed structures in unstable parameter domains. Veh Syst Dyn 50(11):1613–1630 (2012).DOI
[113]Takács D, Stépán G, Hogan SJ. Large amplitude periodic motions of towed rigid wheels. Nonlinear Dyn 52:27–34 (2008). Available from: https://doi.org/10.1007/s11071-007-9253-y.
[114]Takács D, Stépán G. Experiments on quasiperiodic wheel shimmy. J Comput Nonlinear Dyn 4(3):031007 (2009). Available from: https://doi.org/10.1115/1.3124786.
[115]Takács D, Stépán G. Contact patch memory of tyres leading to lateral vibrations of vehicles. Phil Trans R Soc A 371:20120427 (2013). Available from: http://doi.org/10.1098/rsta.2012.0427.
[116]Romano L, Aamo OM, Åslund J, Frisk E. Stability analysis of linear single-track models with transient tyre dynamics. Veh Syst Dyn (2024). Available from: https://doi.org/10.1080/00423114.2024.2445163.
[117]Romano L, Aamo OM, Åslund J, Frisk E. Semilinear single-track models with distributed tyre friction dynamics. Nonlinear Dyn (2025).DOI
[118]Higuchi A, Pacejka HB. The relaxation length concept at large wheel slip and camber. Veh Syst Dyn 25(sup001):50–64 (1997). Available from: https://doi.org/10.1080/00423119708969644.