WorksPhysics and Astronomy
Non-uniform magnetization profile in ferromagnetic heterostructures leading to topological Hall effect like signatures
Abstract
Anomalous Hall effect (AHE), which arises when a current is passed through a ferromagnetic material subjected to a perpendicular magnetic field, is proportional to the magnetization of the sample.Additional hump-like features in AHE are often attributed to the presence of non trivial spin textures leading to topological Hall effect (THE). However, several recent reports have emphasized in context of ferromagnetic SrRuO based heterostructures that the sample inhomogeneity can also result in THE-like features. In order to investigate this issue in general for any ferromagnetic heterostructure, we have considered a phenomenological model to calculate the changes in the shape of hysteresis loop due to various interfacial effects. These changes in the magnetization have been accounted for by considering that the interdomain magnetic coupling parameter () varies exponentially with the distance from the interface along the growth direction of the heterostructure. In case of symmetric interfaces on both sides of a ferromagnet, we have considered the variation of as a Gaussian function. We have found that the additional AHE contribution due to the net change in magnetization in such cases are akin to experimentally observed THE, even though we have not considered any topological quantity explicitly in our model. Thus, we propose another situation with nonuniform magnetization profile that may be used to explain additional features in AHE, which might not necessarily be intrinsic THE.
I Introduction
Transition metal oxides (TMOs) are host of a plethora of collective phenomena such as magnetism, ferroelectricity, metal-insulator transition, unconventional superconductivity, charge ordering, etc[1, 2, 3, 4]. The tremendous advancement in thin film growth technologies over the last two decades have enabled the research community to grow artificial structures of these complex oxides with unit cell precision[5, 6, 7, 8, 9, 10, 11]. Such heterostructuring[9, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25] leads to subtle modifications in spin, charge, orbital, and lattice sectors at the interface, resulting in a variety of emergent magnetic behaviors such as interfacial ferromagnetism, exchange bias, spin spiral magnetic phase, enhanced magnetic ordering temperature, topological Hall effect (THE), etc. THE arises in materials with non-zero scalar spin chirality denotes localized moment, which results in an internal fictitious magnetic field due to the real space Berry phase. Since the first report of the observation of THE in MnSi[26], THE has been demonstrated in a variety of systems having chiral spin configurations[27, 28, 29, 30, 31]. As the simultaneous presence of broken inversion symmetry and finite spin orbit coupling (either intrinsic or Rashba-type or both) can lead to a sizeable Dzyaloshinskii-Moriya (D-M) interaction, interfacial engineering of TMOs has become a successful approach to achieve THE[25, 32, 33, 34].
Bulk SrRuO (SRO) is a metallic ferromagnet with a magnetic transition temperature of 165 K[35]. The origin of THE-like signal in SRO-based heterostructures is under intense scrutiny in recent years[25, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45]. While the origin of this phenomenon has been linked with the stabilization of nontrivial spin textures like skyrmions near the interface[25, 36, 37, 38, 39], another set of studies have emphasized that the sample inhomogeneity gives rise to THE-like features[40, 41, 42, 43, 44]. Since the shape of ferromagnetic hysteresis loop is generally affected due to the electronic, magnetic and structural changes across the interface[46, 47], we have considered another possible scenario with a nonuniform magnetization profile along the growth direction of the heterostructure[48]. We have examined whether layer dependent hysteresis loops in such systems can lead to these THE-like signature without invoking any topological interpretation.
In this work, we have simulated the hysteresis loops using a phenomenological approach for a ferromagnet having layer dependent internal molecular field (we refer one unit cell along the growth direction as ‘layer’ throughout the paper). We have followed the mathematical model of Jiles et al. (Ref. [49]), which was developed to calculate the hysteresis loop for an isotropic ferromagnet. In the simplest form, the effective magnetic field felt by an individual domain within a ferromagnet can be expressed as , where is the actual magnetic field within the domain and represents the total sample magnetization per unit volume. The interdomain coupling is represented by a mean field parameter . It is assumed here that the change in the magnetization due to any interfacial effect can be accounted phenomenologically by considering to be non-uniform and strongly dependent on the distance () from the interface. For a ferromagnet, having an interface on one side, hysteresis curves have been simulated considering that varies exponentially with below a critical length scale and it becomes equal to (mean field parameter of an uniformly magnetized ferromagnet) above that. To investigate effect of symmetric interfaces on both sides of a ferromagnet, has been considered to vary as a Gaussian function. We have found that the additional AHE, which is proportional to the change in magnetization (defined as the change in magnitude of magnetization between the cases with constant and layer-dependent ), appears very similar to what have been claimed experimentally as THE signature in several systems.[33, 39, 50, 51, 52, 53].
Details of simulation
Under the assumption of the presence of non-trivial spin textures like skyrmions [25, 36, 37, 38, 39], the Hall resistivity () is expressed as
where with , , denoting ordinary Hall effect (OHE), AHE and THE, respectively. , are constant and is the magnetization.
In case of a heterostructure with nonuniform magnetization along the growth direction, the total magnetization () can be considered as summation of two terms: (magnetization of a uniform ferromagnet) and (this corresponds to the change in due to all interfacial effects). In such system, we can also express as a combination of two AHE contributions instead of considering any intrinsic THE
We have simulated hysteresis loops for and using the method described in Ref. [49], which we briefly discuss here. The magnetization is related to the and can be written as
where is an arbitrary function with the following properties: when and as . is the saturation magnetization. Equation (3) does not consider any hindrance to the change in magnetization such as pinning of domain wall motion; therefore, represents only the anhysteretic magnetization curve () of a ferromagnet in reality.
Thus, one may rewrite equation (3) as
Jiles et al.[49] further modelled by a modified Langevin function[54]
The shape of the anhysteretic magnetization is determined by the parameter , which has the same dimension as .
In presence of an external magnetic field, the size of ferromagnetic domains, which are oriented along the direction of the field, would grow in size. However, pinning sites such as structural imperfections, impurity atoms, etc. disrupt domain wall motion and result in irreversible changes in magnetization curves. The energy loss per unit volume due to the pinning can be represented as (see Ref. 49 for the derivation)
where is a constant and related to the average density of pinning sites, the average pinning energy of all sites for 180° oriented walls and the magnetization density of a domain aligned along the direction of the field.
The magnetization energy is defined as the difference between the ideal, lossless case ( is the effective magnetic induction) and the loss due to hysteresis i.e.
The corresponding differential form of the equation is
where is +1 (-1) for the positive (negative) sweep of as the pinning process opposes the direction of the applied field. This is the master equation that we have used to simulate the hysteresis curve. Since both sides of the equation (8) contain , we have evaluated first a trial magnetization
as a function of external magnetic field by the relation .
The effective field is treated as . We have used equation (5) and 8 sequentially to simulate hysteresis loops. Also, we have considered in Gaussian units, hence and so can be written as . The derivative of with respect to has been calculated using the method of finite differences[55]. The parameter is taken as 11 through out the paper.
Results and Discussions
We first discuss the results of hysteresis loop simulation for a ferromagnet without any interfacial effects [see inset of Figure 1(a)]. For this, the material has been considered to be consisting of unit cells along the growth direction. The total magnetization has been evaluated by summing the magnetization of each individual unit cell, characterized by a same constant value of the mean field parameter . Figure 1(a) summarizes the results of simulation for different values of for a fixed value of the parameter . While the remanent magnetization () is independent of , the coercive field () decreases with the increase in . Moreover, a lower value of generates the typical ‘sigmoid’ type ferromagnetic hysteresis loop, whereas the magnetization approaches to its saturation value very near to the zero field when larger values of (e.g. 500) are considered in our simulation. Thus, the parameter can be tuned to study soft and hard ferromagnets, having same . Since the parameter represents the energy loss due to all pinning processes, our simulations for a fixed found a decrease in both and with a lowering of the parameter [Fig. 1(b)]. We have also simulated hysteresis with a larger range of for much larger values of and the results have been shown in the Supplementary Materials.

Figure 1. Simulated hysteresis curves of a uniform ferromagnet (without any interface): (a) for different values of keeping , (b) for different values of with .
Effect of interface on one side of the ferromagnet
When the ferromagnetic material is grown on a substrate or heterostructured with another compound, the interfacial effects are very likely to affect the ferromagnetic response of the layers near the interface. We take into account such interfacial effects on the ferromagnetic hysteresis by considering that the parameter is no longer uniform through out all unit cells along the directions. Since interfacial effects very often vary exponentially with the distance from the interface[13, 56, 57], it is reasonable to assume that the has the following exponential dependence with the distance from the interface for and for , where is a critical distance from the interface, above which interfacial effects are insignificant. is a parameter with the dimension of the length. The corresponding variation of across the ferromagnetic material is plotted in the right panel of Figure 2(a) as a function of the fractional distance from the interface for different values of ( and were used for these plots).

Figure 2. Modification of ferromagnet hysteresis loop in presence of interfacial effects. (a) The mean field parameter is a considered as function of the distance () from the interface: for and for (a) versus for several values of . is taken as 0.1. Corresponding (b) vs. and (c) vs. for , 0.3, 0.5 and 0.7. The dotted and solid line represents field sweep from to , and to , respectively. Inset in (c) is a magnified view of for .
The hysteresis curves for these distance dependent with have been simulated for a ferromagnetic system, consisting of unit cells, similar to the previously discussed case of a uniform ferromagnet (Figure 1). As expected, the hysteresis loop for the -dependent looks quite different compared to the case of the uniform ferromagnet [see the right most panel of Figure 2(b)]. As we reduce the extent of interfacial effects by decreasing , the hysteresis loop gradually becomes similar to the hysteresis of a uniform ferromagnet. This is further evident in Figure 2(c), where the difference () between the magnetization response of the layer dependent case and the layer independent case have been shown for the same set of . Though the decreases with the reduction of , the interfacial effect is still prominent even in case of the simulation with [see inset in Figure 2(c)]. The hysteresis in (difference between forward and backward field sweep) also increases with . Our most surprising finding is that these would lead to an extra contribution ( in equation (2)) in the Hall effect measurement, which would resemble THE-features, reported in a variety of quantum materials in recent years[33, 39, 45, 50, 51, 52, 53]. Interestingly, the , obtained from our simulations, also varies linearly near - akin to the linear variation of observed experimentally[58].
The effect of the parameter has been explored with a fixed value of (results are shown in Supplementary Materials). As expected, smaller value of would correspond to a stronger interfacial effect, leading to an increase of .
We have already demonstrated in context of a uniform ferromagnet (Figure 1(a)) that we can explore both soft and hard ferromagnetic behaviour by changing the parameter . In order to explore how affects the hysteresis loop in presence of interfacial effects, we have simulated magnetization curves considering different values of for , , and . Clearly, is reduced with the lowering of (Figure 3(a)), signifying that the change in the magnetic hysteresis due to interfacial effects would be lower in a hard ferromagnet. The impact of the pinning energy scale on the interfacial effect () has been examined by varying the parameter . The outcomes of our simulations with lowering have been shown in Figure 3(b) [, , and ]. The hysteresis in , which is very strong for the case of , decreases with lowering and is completely absent for the case. Similar behaviors have been observed in vs. measurements at different for SrRuO [34, 59].

Figure 3. Difference between magnetization with and without interfacial effects versus (a) for several values of with , and ; (b) for several values of with , and . The dotted and solid line represents field sweep from to , and to , respectively.
Effect of interfaces on both sides of the ferromagnet
So far, we have investigated hysteresis of a ferromagnet with interfacial effects on one side while the other side retains it’s bulk-like interdomain magnetic coupling parameter. The inversion symmetry is broken in such a heterostructure, which can lead to finite D-M interaction. Since the net D-M interaction would vanish in case of a ferromagnet having interface on both sides, the possibilities of getting THE-like features has been also examined in SrRuO-based heterostructures with such symmetric interfaces[58, 60]. To explore the modification of hysteresis loop in such an artificial structure (see middle panel of Figure 4(a)), we have considered the variation of as a Gaussian function, where the centre of the ferromagnetic compound is taken as the reference point. The variations of for different values of and have been shown in left panel of Figure 4(a). The corresponding variations of are shown in Figure 4(b). Changes in magnetization due to interfacial effects are enhanced with the lowering of the parameter . overall behavior of vs. is very similar to the previously discussed ferromagnet having interfacial changes on one side. We also consider a possible scenario where is enhanced towards the interface []. The sign of is reversed compared to the previous case (Figure 4(c)). Thus, our model predicts that THE-like features can be observed in a heterostructure with symmetric interfaces as well due to the layer dependent interdomain magnetic coupling even though the net D-M interaction is zero.

Figure 4. Difference between magnetization with and without interfacial effects versus for , 0.3, 0.5 and 0.7, keeping . Inset: versus for the corresponding values of . The dotted and solid line in (b) and (c) represents field sweep from to , and to , respectively.
We also note that the observed maximum magnitude of topological Hall resistivity in experiment is around one order of magnitude smaller compared to the maximum magnitude of anomalous Hall resistivity[37, 58]. Although we have not explicitly calculated resistivity here, the relative magnitudes of the extra AHE () and the AHE () component in present case can be used for the comparison. With the ranges of parameters we have explored in this paper, we have found that the maximum of is around one order of magnitude smaller compared to the maximum of as well.
Conclusion
To summarize, motivated by several recent experimental papers on SrRuO based heterostructures that claim that additional features in AHE that are often attributed to THE may not necessarily be a result of non trivial spin textures and may arise from an inhomogeneity in the ferromagnetic structure[40, 41, 42, 43, 44], we have developed a simple model to investigate changes in ferromagnetic hysteresis loop due to interfacial effects. Within the formalism of a phenomenological approach, developed by Jiles et al.[49], we have considered that the strength of the interdomain magnetic coupling parameter within the ferromagnetic material as a function of the distance from the interface. The resultant change in magnetization, obtained from our simulations, would lead to an additional contribution in AHE, which resembles experimental aspects of THE seen in several cases. While we do not claim that all experimental reports of THE in oxide heterostructures can be accounted by multi-channel AHE due to layer dependent hysteresis, we want to emphasize that such possibility must be examined before assigning these additional features in AHE to non trivial spin textures. Though we have discussed about interfacial effects in oxide heterostructure only in this paper, our present model is very general and can be applied for any heterostructure consisting of elemental ferromagnets, chalcogenides, heavy fermions etc.
See the supplementary material for simulations with larger range of , and the effect of the parameter in the case of simulations having interfacial effects on one side.
Acknowledgements
We thank Shashank Kumar Ojha and Prithwijit Mandal for insightful comments about this paper. SM acknowledges financial supports from DST Nanomission grant (Grant No. DST/NM/NS/2018/246) and Infosys Foundation, Bangalore.
References
Supplementary Materials
Hysteresis simulation with a larger range of
We have simulated hysteresis for a uniformly magnetized ferromagnet with larger range of by considering (Figure S1).

Figure S1. Simulated hysteresis curves of a uniform ferromagnet (without any interface) for different values of keeping , for higher values of .
Role of the parameter
For the case of the ferromagnet having interfacial effects on one side, we have plotted the curves for various values of in Figure 3 of main text. Another parameter that affects the exponential nature of is . We expect to have similar trends in the plots of if we consider different values of . The results of the simulations with different values of are shown in Figure S2.

Figure S2. Modification of ferromagnet hysteresis loop in presence of interfacial effects. The mean field parameter is considered as a function of the distance () from the interface: for and for , vs. for , , and , inset: versus for several values of . is taken as .
References
- [1]M. Imada, A. Fujimori, and Y. Tokura, Rev. Mod. Phys. 70, 1039 (1998).
- [2]Y. Tokura, Reports on Progress in Physics 69, 797 (2006).
- [3]B. Keimer, S. A. Kivelson, M. R. Norman, S. Uchida, and J. Zaanen, Nature 518, 179 (2015).
- [4]N. P. Armitage, P. Fournier, and R. L. Greene, Rev. Mod. Phys. 82, 2421 (2010).
- [5]D. G. Schlom, L.-Q. Chen, X. Pan, A. Schmehl, and M. A. Zurbuchen, Journal of the American Ceramic Society 91, 2429 (2008).
- [6]P. Zubko, S. Gariglio, M. Gabay, P. Ghosez, and J.-M. Triscone, Annual Review of Condensed Matter Physics 2, 141 (2011), https://doi.org/10.1146/annurev-conmatphys-062910-140445.
- [7]H. Y. Hwang, Y. Iwasa, M. Kawasaki, B. Keimer, N. Nagaosa, and Y. Tokura, Nature Mater. 11, 103 (2012).
- [8]J. Chakhalian, J. W. Freeland, A. J. Millis, C. Panagopoulos, and J. M. Rondinelli, Rev. Mod. Phys. 86, 1189 (2014).
- [9]A. Bhattacharya and S. J. May, Annual Review of Materials Research 44, 65 (2014), http://dx.doi.org/10.1146/annurev-matsci-070813-113447.
- [10]S. Stemmer and S. James Allen, Annual Review of Materials Research 44, 151 (2014).
- [11]S. Middey, J. Chakhalian, P. Mahadevan, J. W. Freeland, A. J. Millis, and D. D. Sarma, Annual Review of Materials Research 46, 305 (2016).
- [12]F. Hellman, A. Hoffmann, Y. Tserkovnyak, G. S. D. Beach, E. E. Fullerton, C. Leighton, A. H. Mac-Donald, D. C. Ralph, D. A. Arena, H. A. Dürr, P. Fischer, J. Grollier, J. P. Heremans, T. Jungwirth, A. V. Kimel, B. Koopmans, I. N. Krivorotov, S. J. May, A. K. Petford-Long, J. M. Rondinelli, N. Samarth, I. K. Schuller, A. N. Slavin, M. D. Stiles, O. Tchernyshyov, A. Thiaville, and B. L. Zink, Rev. Mod. Phys. 89, 025006 (2017).
- [13]J. Chakhalian, J. W. Freeland, G. Srajer, J. Strempfer, G. Khaliullin, J. C. Cezar, T. Charlton, R. Dal-gliesh, C. Bernhard, G. Cristiani, H. U. Habermeier, and B. Keimer, Nat Phys 2, 244 (2006).
- [14]J. Chakhalian, J. W. Freeland, H.-U. Habermeier, G. Cristiani, G. Khaliullin, M. van Veenendaal, and B. Keimer, Science 318, 1114 (2007), http://www.sciencemag.org/content/318/5853/1114.full.pdf.
- [15]A. Brinkman, M. Huijben, M. van Zalk, J. Huijben, U. Zeitler, J. C. Maan, W. G. van der Wiel, G. Rijnders, D. H. A. Blank, and H. Hilgenkamp, Nature Materials 6, 493 (2007).
- [16]S. J. May, P. J. Ryan, J. L. Robertson, J.-W. Kim, T. S. Santos, E. Karapetrova, J. L. Zarestky, X. Zhai, S. G. E. te Velthuis, J. N. Eckstein, S. D. Bader, and A. Bhattacharya, Nature Materials 8, 892 (2009).
- [17]A. V. Boris, Y. Matiks, E. Benckiser, A. Frano, P. Popovich, V. Hinkov, P. Wochner, M. Castro-Colin, E. Detemple, V. K. Malik, C. Bernhard, T. Prokscha, A. Suter, Z. Salman, E. Morenzoni, G. Cristiani, H.-U. Habermeier, and B. Keimer, Science 332, 937 (2011), http://www.sciencemag.org/content/332/6032/937.full.pdf.
- [18]C. He, A. J. Grutter, M. Gu, N. D. Browning, Y. Takamura, B. J. Kirby, J. A. Borchers, J. W. Kim, M. R. Fitzsimmons, X. Zhai, V. V. Mehta, F. J. Wong, and Y. Suzuki, Phys. Rev. Lett. 109, 197202 (2012).
- [19]M. Gibert, P. Zubko, R. Scherwitzl, J. Iniguez, and J.-M. Triscone, Nat Mater 11, 195 (2012).
- [20]A. J. Grutter, H. Yang, B. J. Kirby, M. R. Fitzsimmons, J. A. Aguiar, N. D. Browning, C. A. Jenkins, E. Arenholz, V. V. Mehta, U. S. Alaan, and Y. Suzuki, Phys. Rev. Lett. 111, 087202 (2013).
- [21]E. J. Moon, R. Colby, Q. Wang, E. Karapetrova, C. M. Schlepütz, M. R. Fitzsimmons, and S. J. May, Nature Communications 5 (2014), 10.1038/ncomms6710.
- [22]J. D. Hoffman, B. J. Kirby, J. Kwon, G. Fabbris, D. Meyers, J. W. Freeland, I. Martin, O. G. Heinonen, P. Steadman, H. Zhou, C. M. Schlepütz, M. P. M. Dean, S. G. E. te Velthuis, J.-M. Zuo, and A. Bhattacharya, Phys. Rev. X 6, 041038 (2016).
- [23]R. K. Patel, D. Meyers, X. Liu, P. Mandal, M. Kareev, P. Shafer, J.-W. Kim, P. J. Ryan, S. Middey, and J. Chakhalian, APL Materials 8, 041113 (2020), https://doi.org/10.1063/5.0004530.
- [24]D. Yi, J. Liu, S.-L. Hsu, L. Zhang, Y. Choi, J.-W. Kim, Z. Chen, J. D. Clarkson, C. R. Serrao, E. Arenholz, P. J. Ryan, H. Xu, R. J. Birgeneau, and R. Ramesh, Proceedings of the National Academy of Sciences 113, 6397 (2016).
- [25]J. Matsuno, N. Ogawa, K. Yasuda, F. Kagawa, W. Koshibae, N. Nagaosa, Y. Tokura, and M. Kawasaki, Science Advances 2, e1600304 (2016).
- [26]A. Neubauer, C. Pfleiderer, B. Binz, A. Rosch, R. Ritz, P. G. Niklowitz, and P. Böni, Phys. Rev. Lett. 102, 186602 (2009).
- [27]N. Kanazawa, Y. Onose, T. Arima, D. Okuyama, K. Ohoyama, S. Wakimoto, K. Kakurai, S. Ishiwata, and Y. Tokura, Phys. Rev. Lett. 106, 156603 (2011).
- [28]C. Sürgers, G. Fischer, P. Winkel, and H. v. Löhneysen, Nature Communications 5 (2014), 10.1038/ncomms4400.
- [29]T. Kurumaji, T. Nakajima, M. Hirschberger, A. Kikkawa, Y. Yamasaki, H. Sagayama, H. Nakao, Y. Taguchi, T. hisa Arima, and Y. Tokura, Science 365, 914 (2019).
- [30]C. Liu, Y. Zang, W. Ruan, Y. Gong, K. He, X. Ma, Q.-K. Xue, and Y. Wang, Phys. Rev. Lett. 119, 176809 (2017).
- [31]S. K. Ojha, S. K. Gogoi, M. M. Patidar, R. K. Patel, P. Mandal, S. Kumar, R. Venkatesh, V. Ganesan, M. Jain, and S. Middey, Advanced Quantum Technologies 3, 2000021 (2020).
- [32]L. Vistoli, W. Wang, A. Sander, Q. Zhu, B. Casals, R. Cichelero, A. Barthélémy, S. Fusil, G. Herranz, S. Valencia, R. Abrudan, E. Weschke, K. Nakazawa, H. Kohno, J. Santamaria, W. Wu, V. Garcia, and M. Bibes, Nature Physics 15, 67 (2018).
- [33]Q. Shao, Y. Liu, G. Yu, S. K. Kim, X. Che, C. Tang, Q. L. He, Y. Tserkovnyak, J. Shi, and K. L. Wang, Nature Electronics 2, 182 (2019).
- [34]E. Skoropata, J. Nichols, J. M. Ok, R. V. Chopdekar, E. S. Choi, A. Rastogi, C. Sohn, X. Gao, S. Yoon, T. Farmer, R. D. Desautels, Y. Choi, D. Haskel, J. W. Freeland, S. Okamoto, M. Brahlek, and H. N. Lee, Science Advances 6, eaaz3902 (2020).
- [35]G. Cao, S. McCall, M. Shepard, J. E. Crow, and R. P. Guertin, Phys. Rev. B 56, 321 (1997).
- [36]Y. Ohuchi, J. Matsuno, N. Ogawa, Y. Kozuka, M. Uchida, Y. Tokura, and M. Kawasaki, Nature Communications 9 (2018), 10.1038/s41467-017-02629-3.
- [37]L. Wang, Q. Feng, Y. Kim, R. Kim, K. H. Lee, S. D. Pollard, Y. J. Shin, H. Zhou, W. Peng, D. Lee, W. Meng, H. Yang, J. H. Han, M. Kim, Q. Lu, and T. W. Noh, Nature Materials 17, 1087 (2018).
- [38]Q. Qin, L. Liu, W. Lin, X. Shu, Q. Xie, Z. Lim, C. Li, S. He, G. M. Chow, and J. Chen, Advanced Materials 31, 1807008 (2019).
- [39]K.-Y. Meng, A. S. Ahmed, M. Bácani, A.-O. Mandru, X. Zhao, N. Bagués, B. D. Esser, J. Flores, D. W. McComb, H. J. Hug, and F. Yang, Nano Letters 19, 3169 (2019).
- [40]D. Kan, T. Moriyama, K. Kobayashi, and Y. Shimakawa, Phys. Rev. B 98, 180408 (2018).
- [41]L. Wu, F. Wen, Y. Fu, J. H. Wilson, X. Liu, Y. Zhang, D. M. Vasiukov, M. S. Kareev, J. H. Pixley, and J. Chakhalian, Physical Review B 102, 220406 (2020).
- [42]G. Kimbell, P. M. Sass, B. Woltjes, E. K. Ko, T. W. Noh, W. Wu, and J. W. A. Robinson, Phys. Rev. Materials 4, 054414 (2020).
- [43]L. Wang, Q. Feng, H. G. Lee, E. K. Ko, Q. Lu, and T. W. Noh, Nano Letters 20, 2468 (2020).
- [44]L. Wysocki, L. Yang, F. Gunkel, R. Dittmann, P. H. M. van Loosdrecht, and I. Lindfors-Vrejoiu, Phys. Rev. Materials 4, 054402 (2020).
- [45]D. J. Groenendijk, C. Autieri, T. C. van Thiel, W. Brzezicki, J. Hortensius, D. Afanasiev, N. Gauquelin, P. Barone, K. van den Bos, S. van Aert, et al., Physical Review Research , 023404 (2020).
- [46]A. Alberca, N. M. Nemes, F. J. Mompean, N. Biskup, A. de Andres, C. Munuera, J. Tornos, C. Leon, A. Hernando, P. Ferrer, G. R. Castro, J. Santamaria, and M. Garcia-Hernandez, Phys. Rev. B 84, 134402 (2011).
- [47]F. Y. Bruno, J. Garcia-Barriocanal, M. Varela, N. M. Nemes, P. Thakur, J. C. Cezar, N. B. Brookes, A. Rivera-Calzada, M. Garcia-Hernandez, C. Leon, S. Okamoto, S. J. Pennycook, and J. Santamaria, Phys. Rev. Lett. 106, 147205 (2011).
- [48]S. Singh, M. R. Fitzsimmons, T. Lookman, J. D. Thompson, H. Jeen, A. Biswas, M. A. Roldan, and M. Varela, Phys. Rev. Lett. 108, 077207 (2012).
- [49]D. Jiles and D. Atherton, Journal of Magnetism and Magnetic Materials 61, 48 (1986).
- [50]Z. Liu, A. Burigu, Y. Zhang, H. M. Jafri, X. Ma, E. Liu, W. Wang, and G. Wu, Scripta Materialia 143, 122 (2018).
- [51]W. Wang, Y.-F. Zhao, F. Wang, M. W. Daniels, C.-Z. Chang, J. Zang, D. Xiao, and W. Wu, Nano letters 21, 1108 (2021).
- [52]Y. Li, L. Zhang, Q. Zhang, C. Li, T. Yang, Y. Deng, L. Gu, and D. Wu, ACS applied materials & interfaces 11, 21268 (2019).
- [53]Y. Yun, Y. Ma, T. Su, W. Xing, Y. Chen, Y. Yao, R. Cai, W. Yuan, and W. Han, Phys. Rev. Materials 2, 034201 (2018).
- [54]P. Langevin, Ann. chim. et phys. , 203 (1905).
- [55]Z. Li, Z. Qiao, and T. Tang, Numerical solution of differential equations: introduction to finite difference and finite element methods (Cambridge University Press, 2017).
- [56]A. Ohtomo, D. A. Muller, J. L. Grazul, and H. Y. Hwang, Nature 419, 378 (2002).
- [57]Y. Liu and X. Ke, ChemInform 46, 373003 (2015).
- [58]W. Wang, M. W. Daniels, Z. Liao, Y. Zhao, J. Wang, G. Koster, G. Rijnders, C.-Z. Chang, D. Xiao, and W. Wu, Nature materials 18, 1054 (2019).
- [59]S. D. Seddon, D. E. Dogaru, S. J. R. Holt, D. Rusu, J. J. P. Peters, A. M. Sanchez, and M. Alexe, Nature Communications 12 (2021), 10.1038/s41467-021-22165-5.
- [60]L. Yang, L. Wysocki, J. Schöpf, L. Jin, A. Kovács, F. Gunkel, R. Dittmann, P. H. M. van Loosdrecht, and I. Lindfors-Vrejoiu, Phys. Rev. Materials 5, 014403 (2021).