WorksPhysics and Astronomy
Anomalous thermal transport and high thermoelectric performance of Cu-based vanadate CuVO3
Abstract
Thermoelectric (TE) conversion technology, capable of transforming heat into electricity, is critical for sustainable energy solutions. Many promising TE materials contain rare or toxic elements, so the development of cost-effective and eco-friendly high-performance TE materials is highly urgent. Herein, we explore the thermal transport and TE properties of transition metal vanadate CuVO3 by using first-principles calculation. On the basis of unified theory of heat conduction, we uncover the hierarchical thermal transport feature in CuVO3, where wave-like tunneling makes a significant contribution to the lattice thermal conductivity (\k{appa}l) and result in the anomalously weak temperature dependence of \k{appa}l. This is primarily attributable to the complex phononic band structure caused by the heterogeneity of Cu-O and V-O bonds. Simultaneously, we report a high power factor of 5.45 mW K-2 m-1 realized in hole-doped CuVO3, which arises from a high electrical conductivity and a large Seebeck coefficient enabled by the multiple valleys and large electronic density of states near the valence band edge. Impressively, the low \k{appa}l and the high power factor make p-typed CuVO3 have ZT of up to 1.39, with the excellent average ZT above 1.0 from 300 to 600 K, which is superior to most reported Cu-based TE materials. Our findings suggest that CuVO3 compound is promising candidate for energy conversion applications in innovative TE devices.
Corresponding Author: [email protected], [email protected], [email protected]
All density functional theory (DFT) calculations were implemented in the Vienna Ab initio Simulation Package (VASP)[26, 27]. The interactions between ions and electrons were described by the Projector Augmented Wave (PAW) method[28], and the exchange-correlation effects were accounted for within the generalized gradient approximation (GGA) in the form of Perdew-Burke-Ernzerhof (PBE) functional[29, 30]. To refine the description of electronic and phonon transport properties, the DFT+ approach was adopted[31, 32], setting the effective Hubbard parameters for V and Cu elements at 3 eV and 4 eV, respectively. The Brillouin zone sampling was determined using the Monkhorst-Pack scheme[33]. The cutoff energy for plane-wave basis was consistently set to 520 eV across all calculations. The energy and force convergence criteria were set to eV and eV/Å, respectively. Phonon dispersion calculations were performed on a (270 atoms) supercell utilizing the PHONOPY software package[34]. Third-order force constants were computed within supercell using the THIRDORDER code[35], wherein the interatomic interactions were considered up to the eighth nearest neighbors. The was calculated via the dual-phonon model[36], by solving the phonon BTE with the modified ShengBTE package[35, 37]. For achieving the convergence of thermal conductivity, the -grid mesh was set to . After obtaining accurate electronic band structures, the BoltzTraP2 software package[38] was utilized to compute the electronic transport properties of .
Fig. 1(a) illustrates the crystallographic structure of . The compound crystallizes in the trigonal system, conforming to an ilmenite structure with the designated space group . The lattice constants are determined to be: Å, Å, and Å. Within this framework, Cu and V atoms are situated at the 6c Wyckoff positions, while O atoms are placed at the 18f Wyckoff positions. The optimized lattice parameters exhibit commendable congruence with the experimental values reported in literature[39]. A closer inspection of the crystalline structure reveals that is comprised of and octahedra, both manifesting as distorted and irregular geometries. These polyhedra are intricately connected through the O atoms. Notably, the V-O bonds span lengths of 1.82 Å and 2.07 Å, whereas the Cu-O bonds extend to 2.28 Å. This bonding heterogeneity is responsible for the softening of phonon modes and low phonon group velocities and thus low as discussed later.
Phonon dispersion curve reflects the intrinsic characteristic of atomic vibrations within crystals, dictating phonon thermal transport properties. Figure 1(b-Figure 1c) show the first Brillouin zone and phonon spectrum along the high symmetry directions as well as the projected phonon density of states (PDOS). The absence of imaginary phonon modes indicates the dynamic stability of . Similar to the phonon structures of other
Figure 1. (a) Conventional crystal structure of , and the Cu, V and O atoms are shown as green, blue and red spheres, respectively. (b) The first Brillouin zone of . (c) Phonon dispersion curves along high-symmetry directions of the Brillouin zone and corresponding phonon density of states of .
Figure 2. The calculated phonon mean free path at 300 K of CuVO along (a) , (b) and (c) axes. The horizontal dashed line marks the Ioffe-Regel limit in space. The temperature-dependent along (d) , (e) , and (f) axes, predicted from the different unified theories.
To seek the underlying mechanisms for the hierarchical thermal transport and low of CuVO, we further investigate the modal phonon lifetime, group velocity, scattering phase space, and Grüneisen parameter. Figure 3(a) displays the calculated phonon lifetimes, along with the Ioffe–Regel limit in time given by the Cahill–Watson–Pohl (CWP) model ( is the inverse of the phonon frequency)[44] and the Wigner limit ( equals the inverse of the average interband spacing, defined as , where is the number of atoms in the primitive cell and is the maximum frequency)[45]. It is evident that a large number of vibrational modes have lifetimes longer than the Ioffe–Regel limit but shorter than the Wigner limit, indicating that most of the well-defined-in-time phonons defined within the dual-phonon theroy are actually wave-like diffusons according to the Wigner equation. It also suggests that a huge proportion of diffusons revealed in the hierarchical mean free paths should originate mainly from the relatively low phonon group velocity rather than the phonon lifetime. Indeed, as presented in Figure 3(b), the phonon group velocities above 2.5 THz are relatively low, which is closely associated with the bonding heterogeneity-induced soft modes and flat bands in the phonon spectrum. From the perspective of dual-phonon theory, we note that many reported crystalline materials exhibit hierarchical thermal transport behavior primarily owing to the large scattering rates caused by strong anharmonicity, such as [46] and [36], whereas here the same behavior mainly arises from the relatively low group velocities. Although the complex phonon dispersion relation gives rise to the large three-phonon scattering phase space in due to easily satisfied energy and momentum selection rules, as seen in Figure 3(c), which is comparable to that of in magnitude, the lattice anharmonicity revealed by the modal Grüneisen parameter (Figure 3(d)) is not strong compared to . Note that the average value of Grüneisen parameter in is 1.49 at 300 K, far below the average value of 1.83 in and 7.2 in 14. As a result, the intrinsic phonon-phonon scattering rates of most modes, inverse of phonon lifetimes, are consistently lower than their phonon frequencies which correspond to the Ioffe-Regel limit given by the CWP model.
Figure 3. (a) The calculated phonon lifetimes at different temperatures. The solid blue and red lines represent the Wigner limit and Ioffe–Regel limit, respectively. (b) Phonon group velocities along the , , and axes. (c) Mode-resolved weighted three-phonon scattering phase space and (d) Grüneisen parameters of CuVO and LaZrO.
The low of CuVO makes it a promising TE material, provided that its Seebeck coefficient and electrical conductivity are sufficiently high. Given the high correlation between the electronic transport properties and electronic structure, it is imperative to calculate the electronic band structure and projected DOS of CuVO. Previous studies[47] [19] have substantiated that the introduction of a Hubbard parameter in first-principles calculations can accurately characterize the band gap of vanadates. As depicted in Figure 4(a), our calculation shows that CuVO is an indirect band gap semiconductor with a band gap.
Figure 4. (a) Electronic band structure along high-symmetry directions of the Brillouin zone and corresponding density of states of CuVO. (b) Seebeck coefficient, (c) electrical
Figure 5. (a) and (b) peak value of -type and -type doping along axis in CuVO material at different temperature. (c) Comparison of this work to Cu-based eco-friendly TE materials in terms of peak [50, 56, 57, 58, 59, 60, 61, 62, 63, 64].
This work is supported by the Natural Science Foundation of China (NSFC) (Grant Nos. 12374038, 12147102, 52071043, and 52371148), the National Key Research and Development Program of China (No. 2022YFC3901001-1), the Foundation Research Fund for the NSFC (U1902217), the Foundation of Chongqing Normal University (23XLB015, 21XLB046), and the Science and Technology Research Program of Chongqing Municipal Education Commission (No. KJQN-202200510). We gratefully acknowledge HZWTECH for providing computation facilities.
AUTHOR DECLARATIONS
Conflict of Interest
The authors have no conflicts to disclose.
Author Contributions
Xin Jin: Investigation, Writing, original draft. Qiling Ou: Formal analysis, Methodology. Haoran Wei: Formal analysis, Validation. Xianyong Ding: Formal analysis, Methodology. Fangyang Zhan: Formal analysis, Methodology. Rui Wang: Methodology. Xiaolong Yang: Conceptualization, Formal analysis, Methodology, Writing, Funding acquisition. Xuewei Lv: Conceptualization, Funding acquisition. Peng Yu: Conceptualization, Funding acquisition.
DATA AVAILABILITY
The data that support the findings of this study are available from the corresponding author upon reasonable request.
REFERENCES
References
- [26]G. Kresse and J. Hafner, Phys. Rev. B 48 (17), 13115 (1993).
- [27]G. Kresse and J. Furthmüller, Phys. Rev. B 54 (16), 11169 (1996).
- [28]P. E. Blöchl, Phys. Rev. B 50 (24), 17953 (1994).
- [29]J. P. Perdew, A. Ruzsinszky, G. I. Csonka, O. A. Vydrov, G. E. Scuseria, L. A. Constantin, X. Zhou, and K. Burke, Phys. Rev. Lett. 100 (13), 136406 (2008).
- [30]D. Le, A. Kara, E. Schroder, P. Hyldgaard, and T. S. Rahman, J. Phys. Condens. Matter 24 (42), 424210 (2012).
- [31]S. L. Dudarev, G. A. Botton, S. Y. Savrasov, C. J. Humphreys, and A. P. Sutton, Phys. Rev. B 57 (3), 1505 (1998).
- [32]M. R. Norman and A. J. Freeman, Phys. Rev. B 33 (12), 8896 (1986).
- [33]H. J. Monkhorst and J. D. Pack, Phys. Rev. B 13 (12), 5188 (1976).
- [34]A. Togo and I. Tanaka, Scr. Mater. 108, 1 (2015).
- [35]W. Li, J. Carrete, N. A. Katcho, and N. Mingo, Comput. Phys. Commun. 185 (6), 1747 (2014).
- [36]Y. Luo, X. Yang, T. Feng, J. Wang, and X. Ruan, Nat. Commun. 11 (1), 2554 (2020).
- [37]X. Yang, J. Tiwari, and T. Feng, Mater. Today Phys. 24, 100689 (2022).
- [38]G. K. H. Madsen and D. J. Singh, Comput. Phys. Commun. 175 (1), 67 (2006).
- [39]J. R. Rea and E. Kostiner, J. Solid State Chem. 7 (2), 163 (1973).
- [44]D. G. Cahill, S. K. Watson, and R. O. Pohl, Phys. Rev. B 46 (10), 6131 (1992).
- [45]M. Simoncelli, N. Marzari, and F. Mauri, Physical Review X 12 (4), 041011 (2022).
- [46]S. Mukhopadhyay, S. Parker David, C. Sales Brian, A. Puretzky Alexander, A. McGuire Michael, and L. Lindsay, Science 360 (6396), 1455 (2018).
- [47]X. Jin, R. Wang, Y. Zhou, J. Lai, J. Li, G. Pei, S. Chen, X. Wang, J. Xiang, Z. Zhu, and X. Lv, J. Alloys Compd. 896, 162862 (2022).
- [50]Z. Yin, Z. Liu, Y. Yu, C. Zhang, P. Chen, J. Zhao, P. He, and X. Guo, ACS Appl. Mater. Interfaces 13 (48), 57638 (2021).
- [56]G. Guelou, V. Pavan Kumar, V. Carnevali, O. I. Lebedev, B. Raveau, C. Couder, C. Prestipino, P. Lemoine, B. Malaman, and J. Juraszek, Chem. Mater. 33 (23), 9425 (2021).
- [57]K. Shigeno, H. Nishijima, T. Souma, and H. Fujimori, Trans. Electr. 24 (1), 39 (2023).
- [58]M. Shen, S. Lu, Z. Zhang, H. Liu, W. Shen, C. Fang, Q. Wang, L. Chen, Y. Zhang, and X. Jia, ACS Appl. Mater. Interfaces 12 (7), 8271 (2020).
- [59]B. Wei, J. Li, Y. Yang, W. Li, Z. Zhou, Y. Zheng, W. Zhang, Y. Chai, Z. Chang, and C.-W. Nan, NPJ Comput. Mater. 9 (1), 160 (2023).
- [60]B. Ge, J. Hu, Z. Shi, H. Wang, H. Xia, and G. Qiao, Nanoscale 11 (37), 17340 (2019).
- [61]T. Tanimoto, K. Suekuni, T. Tanishita, H. Usui, T. Tadano, T. Kamei, H. Saito, H. Nishiate, C. H. Lee, and K. Kuroki, Adv. Funct. Mater. 30 (22), 2000973 (2020).
- [62]V. P. Kumar, P. Lemoine, V. Carnevali, G. Guelou, O. I. Lebedev, B. Raveau, R. Al Rahal Al Orabi, M. Fornari, C. Candolfi, and C. Prestipino, Inorg. Chem. 60 (21), 16273 (2021).
- [63]V. Pavan Kumar, A. R. Supka, P. Lemoine, O. I. Lebedev, B. Raveau, K. Suekuni, V. Nassif, R. Al Rahal Al Orabi, M. Fornari, and E. Guilmeau, Adv. Energy Mater. 9 (6), 1803249 (2019).
- [64]Y. Zhao, Y. Gu, P. Zhang, X. Hu, Y. Wang, P. A. Zong, L. Pan, Y. Lyu, and K. Koumoto, Sci. Technol. Adv. Mater. 22 (1), 363 (2021).