WorksPhysics and Astronomy
Stable Thin Clathrate Layers
Abstract
We explore elemental Si, Ge and Sn free-standing slabs in diamond, clathrate and other competing structures and evaluate their stability by comparing Kohn-Sham total energies at the same atoms/area coverage . We find that within 3-6 ML range (in units of diamond monolayer), the surface energy stabilizes clathrates against the bulk-stable diamond structure or other competitors, for all three elements. At~1.3-1.6 ML coverages, Si and Ge stable layers are adatomic decorations of the puckered honeycomb lattice, forming a dumbbell–decorated pattern with rectangular unit cell. Analogical Sn layer is unstable to a web-like net of interconnected Sn clusters. The zoo of stable thin-layer non-diamond structures is completed by a Sn metallic bilayer at 2.3 ML coverage.
Introduction
For bulk Sn, Ge and Si, cubic diamond (Pearson symbol cF8) phase is the ground state structure (GS), lying 23, 27 and 54 meV/at. [1], respectively, below its energetically closest sp adversary – type-II clathrate – according to the basic Density Functional Theory (DFT) setup. The main question of the presented fundamental theoretical DFT study is, whether opening a surface could grant clathrates an overall energetic advantage over diamond, resulting in stable free-standing clathrate thin films.
Sp slabs exhibit unsaturated – so called dangling – bonds on the surface, which can be (partially) satisfied by proper reconstruction. The stability of a thin film, measured by internal energy per atom for the given thickness (coverage: number of atoms per area), is thus given by the trade-off between optimal bulk energy and saturation of the surface bonds. The question is, whether the latter effect could significantly favour clathrates.
The inquiry is not restricted to clathrates, but spans wide area of known sp Column-XIV allotropes and thanks to long Molecular Dynamics (MD) annealings sped up by Machine Learning Force Fields (MLFF) innumerably many other candidates for the stable films as well, including metallic even-layers of Sn.
Free-standing thin films minimizing per-atom-energy for the given thickness (coverage) can be imposed by structure-neutral substrate such as amorphous or electronically-balanced oxide (ZrO) or graphite wafer. Further stabilization of the most stable – elemental – clathrate slabs could be achieved by lattice-matching substrate, e.g. via coherent clathrate-diamond interface [2].
In the focus here are several-ML (diamond monolayers) thick films, no longer linked to their parent bulk phases by the physical properties. As for the thinnest ones, even interaction between slab’s faces comes into play, hence new – yet unexplored – features are expected.
The paper is organized as follows. In addition to the basic DFT setup applied, the crucial aspects of energy-minimization of a thin film such as the choice of proper termination, surface reconstruction when cut from the mother bulk phase together with MD-related approaches starting from random atomic positions or from the melt are described in § 3. § 4 introducing known parent bulk phases for thin-film production ensues. § 7 reveals realm of stability of clathrate films for each of the elements Sn, Ge, Si and compares the associated terminations and reconstructions of the per-atom-energy minimizing slabs. We go on to discuss the possibility of spontaneous clathrate crystallization from the melt in § 8 and the impact of van der Waals dispersion interaction in its last Subsection 6.4. The most important outputs of our work are summarized in the final § 9. Additional Figures and xyz-files* of all stable films are included in the Supplemental Material (SM) and are referenced as S.X.Y from the main text, where the integers X and Y index particular SM Section and Figure, respectively. Our principal results – internal energy per atom of the most stable films as a function of the thickness – are plotted in Figure 6 and tabulated in the final Section S10 of SM, supplemented with calculated values of electronic band gaps of the slabs.

Figure 6. Shaded green area: stability region of Sn, Ge, Si clathrate thin films. DFT internal energy with respect to the cF8 bulk phase as a function of coverage is plotted in each case.
State of the Art
We shall start this concise review with honeycomb monolayers of Group-IV (G4) elements. Due to the preferred tetrahedral hybridization of these elements, the only member creating free-standing hexagonal monolayers is carbon (graphene) [3]. Honeycomb monolayers of Pb, Sn, Ge and Si analogous to graphene – so called Xene materials (X = Si, Ge, Sn and Pb) – do exist, but only on appropriate substrates [4], owing to the Xene lattice stretching and its strong interactions with the wafer.
Notably, high-quality monolayer stanene samples were crystallized as an unusually ultraflat honeycomb lattice on Cu(111) via Molecular Beam Epitaxy (MBE), fairly chemically inert and stable up to 243 K [4]. This observation was indeed unexpected because going down the Group IV nature of elements becomes more and more pronounced, reflecting in the buckling, adatomic reconstructions or layer-stacking stabilization mechanisms [5, 6, 7]. There are also indications [8] of free-standing few-layer stanene prepared on liquid hexane by non-equilibrium process of laser ablation, but later in the text (consult subsection 4.4) we propose another hexagonal polymorph for this structure.
Supported (e.g. by Cu(111) binding with Sn orbitals, sustaining stanene chemical inactivity) or with suitable chemical functionalization, stanene is regarded as an ideal platform to study exotic quantum states of matter; when deposited on BN, it retains its electronic properties and can act as a quantum spin Hall insulator with gap as large as 0.3 eV, according to the theoretical predictions [4, 9, 10]. Its applications range from low-power electronics, nanotransistors and high-performance thermoelectrics to fault-tolerant quantum computation. Extra, superconductivity has been discovered in few-layer (bilayer and more-layer) stanene atop PbTe/BiTe/Si(111) sandwich structure [11].
N.B.: Unlike preceding works [9, 10], the present paper goes beyond stability assessment limited to atomic & cell relaxations and phonon-frequency evaluation. Our inquiry does not rely on real phonon frequencies (reported also for dumbbell-stanene); all the free-standing thin films were subjected to long Molecular Dynamics (MD) runs (millions of fs-steps) at RT and higher (300 − 700 K), which led to dumbbell-stanene spontaneous transformation to a web of Sn clusters accompanied by decrease of internal energy per atom in the fixed periodic cell, regardless of reconstruction type, see subsection 4.1 and Figure 2.

Figure 2. Sn₉ and Sn₁₀ clusters (from two different view angles) are fundamental units of threadlike tin structures that form spontaneously for low coverages (discontinuous layers with holes) [52, 53]. Sn₁₅ subunit also frequent in Sn clusters comprises two Sn₉ basic units sharing a common triangle. Sn₅₀ and Sn₁₀₀ are examples of our long DFT annealings at room temperatures with 50 and 100 Sn atoms, respectively, enclosed in fixed ų cubic container. Sn₁₀₀ is composed of 8 Sn₉ clusters in a ring. Blue solid borderline delimits periodic motif.
Reconstructed honeycomb monolayer of Ge – germanene – was synthesized on the top of -Au(111) surface [12]. Similarly, one-atom-thick Si sheets of -reconstructed silicene were deposited on Ag(111) [13]. No experimentally prepared free-standing germanene and silicene are mentioned in the literature.
Optimal reconstruction of free-standing germanene was sought after in theoretical (DFT) paper [14], where the so called HDP structure was regarded to be energetically the best. We think that their “measure of energetics of the phases” – maximizing cohesive energy per unit area – is not the relevant thin-film stability criterion and we suggest in the present work other way to compare the stability of layers: minimization of per-atom energy, , for the given coverage . Wherefore we recalculated all the samples and plotted the results on the corresponding graphs.
Energy-minimizing (unreconstructed) bilayer silicene and germanene were theoretically predicted to be composed of exactly planar silicene monolayers in eclipsed (e.g. lonsdaleite) conformation [15, 16, 17]. These bilayers are represented by green pentagons marked as “GS-bilayer” in Figure 6 summarizing our chief results. DFT predictions were confirmed by STM experimental images of bilayer Si on Ag(111) [19] [18]. For both bilayer (few-layer) silicene and germanene, the stacking order of monolayers can induce metal-semiconductor phase transition and can regulate size of the electronic band gap [16, 17, 20]. Variety of stacking patterns – majority of which are not available to the bilayer graphene – are due to the inherent buckling of monolayer Si and Ge [15].
We have not investigated impact of stacking sequence on bi-layer stability in the present paper. The scope of this work is limited to , , and reconstructions of bilayer (111) bulk cubic diamond cuts with all possible relative placements of adatoms on two mutually interacting slab’s faces.
Comprehensive theoretical (DFT) survey of atomically thin free-standing Sn films was performed by P. Borlido et al. [21], who discovered the ground state of bilayer Sn. This square metallic – still hypothetical – structure is supposed to be prepared experimentally on e.g. Ag(100), Au(100), Pt(100), or Al(100) substrates, lying just 149 meV/at. above the bulk ground state -Sn (cF8, cubic diamond).
Surface energy of various (un)reconstructed planar terminations of bulk cubic diamond (cF8) phase of Sn, Ge and Si were discussed in [22, 23, 24, 25, 26, 27, 28]. It was shown by numerous experimental and theoretical groups that (111)-diamond section of Sn, Ge and Si is a cleavage face possessing the lowest surface energy among all the cubic-diamond (Pearson cF8) sections. Note that this statement is valid just after proper surface reconstruction [22, 24]. Dimer-Adatom-Stacking Fault (DAS), DAS and , , , adatomic reconstructions were observed on Si and Ge surfaces [29].
It was revealed recently by means of DFT that despite DAS being the ground-state Si(111) bulk-surface reconstruction, high-temperature DAS reconstruction – most frequently observed in experiments – freezes in a metastable state below RT upon cooling [30, 31]. As for Ge(111) relaxed bulk surface adatomic reconstruction is experimentally the most frequent one [24, 29].
R. Zhachuk et al. constructed “strain phase diagrams”: DFT-computed surface energy of various reconstructions of Ge(111) and Si(111)-diamond surfaces as a function of biaxial strain in the range [29, 32], explaining surface structure transformations during growth of strained Ge(111), Si(111) layers (imposed by the substrate). The calculations were compared with scanning tunneling microscopy data obtained on stepped Si(111) surfaces grown on Ge(111) substrate and on Ge islands grown on a Si(111) [29, 31, 32].
It turns out that DAS reconstructions thanks to the presence of all reconstruction elements (each individually) are intrinsically compressive (), while purely adatomic reconstructions gain dominance under biaxial tensile strain (). Namely Si(111) thin films deposited on Ge(111) substrate display c() adatomic surface reconstruction above biaxial tensile strain[29, 32]. Local minima of the surface energy for particular orientations are trade-off between saturation of the dangling bonds and minimization of the surface stress, inherently imposed by the reconstruction units (adatoms, dimers, stacking faults, steps, -bonded chains) introducing unusual bond lengths and angles[30].
There have been a few experiments leading to atomically-thin clathrate layers, deposited on lattice-matching substrates. Our most recent work reports several-atomic-layer thick Sn decagonal clathrate film deposited on quasicrystalline -Al-Ni-Co wafer[33]. The preceding work has shown the versatility of Sn to form quasicrystalline atomic arrangements, growing icosahedral Sn clathrate nanolayer on -Al-Pd-Mn[34].
Group of T. Kume deposited atomically-thin Ge type-II clathrate on Ge(111)-diamond surface. The authors hypothesized the existence of thin buffer layer at the interface[35, 36], but we have managed to construct coherent interface between the two[2]. This kind of coherent clathrate/diamond interface had been formerly displayed in several computational investigations exploiting clever empirical force fields[37, 38, 39], but had never been described in detail (in terms of periodicity, unit cell, atomic bonds), probably owing to quite a large lattice misfit () between diamond and clathrate part of the same G4 element restricting the size of the coherent patches to relatively small islands. Our paper[2] was thus devoted to minimization of that misfit by optimization of materials on both sides.
However, the resulting Sn and Ge configurations in the aforementioned experiments were to large extent governed by the substrate. No experiment states preparation of free-standing clathrate layer on structure-neutral substrate, either liquid, amorphous or electronically-balanced oxide termination. Therefore in the present work, motivated by these studies, the most stable clathrate layers are sought after, regardless of substrate. One of the questions is, whether a combination of square and triangle clathrate tiles (bearing e.g. quasicrystalline symmetry) provides clathrate films with some energetic advantage over e.g. purely triangular (hexagonal) clathrate tilings.
Thicker clathrate layers (m) can be used in opto-electronics as p-n junctions, Schottky barriers, LEDs and photocells in the visible spectrum, optical and X-ray detectors, thanks to the tunable electronic band gap in the range eV by alloying and doping Sn (NaSi, SiGe, ISi, XeSi, Na(SiGe))[40, 41, 42, 43]. This, however, does not apply to the range of coverages investigated in the present work ( ML, Figure 6), since the width of the electronic band gap decreases with the decreasing thickness of the film. Note that all the DFT-computed (slightly underestimated) band gaps of our clathrate slabs are just small fractions of 1 eV, mostly below eV for all three elements, consult Subsection S10 of SM (outside the absorption rage of visible light, eV red light). The band gaps of thin clathrate layers are smaller than that of the corresponding DFT-computed bulk clath-II phase, see Figure S8.1 and Figure S8.2 (SM). Hence, their possible applications are as yet unknown.

Figure S8.1. Electronic Density of States, eDOS, of the bulk type-II clathrates (cF136) compared with bulk diamond (cF8) for Sn, Ge and Si. Fermi energy, , is designated by the vertical thick dashed line.

Figure S8.2. Electronic Density of States, eDOS, of the most stable clathrate slabs, compared with that of the competitive diamond slabs of approximately the same thickness . Fermi energy, , is designated by vertical thick dashed line. Visit Subsection 5.4 in the main text.
Besides opto-electronic applications of clathrates, they are also famous for thermoelectrics and superconductors, owing to the cage doping, but this paper is aimed solely at elemental clathrate thin films, much harder to be experimentally prepared (especially Sn), their structure and symmetry and its impact on slab’s stability.
Methods & Definitions
Density Functional Theory (DFT)
For atomic relaxations as well as for Molecular Dynamics (MD) simulations and on-the-fly Machine Learning Force Fields (MLFF) Vienna Simulation Package (VASP)[44] implementation of the plane-wave Density Functional Theory was employed powered by the Projector Augmented-Wave potentials (PAW)[45] for core-electron treatment in Perdew-Wang PW91 Generalized Gradient Approximation (GGA)[46] to the exchange-correlation functional describing electron-electron interaction.
As a default setup, we applied VASP “Accurate” setting (specifying ENCUT, see below, the grids for Fast Fourier Transform, and the accuracy of the projectors in real space) and default values of energy cutoff of the plane-wave basis set in eV used for electronic wave-function description, ENCUT (Sn: 103.3 eV, Ge: 173.8 eV, Si: 245.4 eV). Energy was converged on K-point mesh density (KPOINTS) determining Bloch vectors for the Brillouin zone sampling to 1 meV/atom precision. Simulated films infinite in two dimensions were separated by at least 15Å vacuum layers in the third dimension to prevent mutual interactions of the periodic copies. sp electrons were treated as valence for each element. All sites in the unit cell along with the unit cell dimensions were relaxed using a conjugate gradient algorithm to minimize energy with an atomic force tolerance of 0.005 eV/Å and a total energy precision of eV.
Electronic band gaps stated in Subsection S10 of SM were evaluated using the same GGA setup and converged within 0.05 eV-wide window with respect to KPOINTS and smearing width given by parameter SIGMA, which was successively lowered from 0.2 eV up to 0 eV while increasing the K-point mesh density. Note that basic PAW GGA setup is well-known to systematically underestimate a bang-gap width.
It has been demonstrated[21] that despite the spin-orbit coupling does have a measurable effect on the formation energy, the energy shift is nearly constant for all 2D Sn structures (55 – 59 meV/at.) and as such can be neglected. Another DFT extension, van der Waals dispersion interaction (PBE-D3 correction to DFT), is discussed in Subsection 6.4.
Ab Initio Molecular Dynamics (AIMD)
By ab initio Molecular Dynamics (AIMD) we mean long MD runs – (tens of) millions of fs-steps – markedly accelerated by Machine Learning Force Fields (MLFF) as implemented in VASP.
AIMD was used within the present work on three occasions. Firstly, AIMD is the simplest way to amorphous bulk and thin films, described in Subsection 4.5, avoiding ingenious construction. Unfortunately, there is no such an automated ab initio way to clathrates, see § 8, where an attempt has been made to recrystallize clathrate slabs from the melt, either in a free-standing slab form or as a Ge slab on an appropriate InN substrate.
The third instance was the thin-film configurational-space search. Despite the clathrate-slab notation suggested in Table 1, Subsubsection 4.3.1, several-atom-thick layers have actually no relation to any bulk phase: they are unique identities themselves. Long AIMD runs thus attest to the completeness of our thinnest-film enumeration, mainly specific Sn metallic even-layers rediscovered this way in Subsection 4.4. AIMD confirms that there are not any other low-energy thin-film atomic arrangements.
Namely, for the Sn, Ge and Si thinnest-film production in the range of coverages ML with the basic step ML, steps 5 fs each in the temperature range K were performed, leading to no new phases. As concerns Sn, due to the close competition of square and triangle even-layers in this temperature range and owing to the plethora of Sn phases, Subsection 4.4, we have gradually increased coverage from 2 ML to 2.5 ML via random single-atom addition to the supercell, witnessing a coexistence of the two phases at approximately 2.29 ML (for 137–138 atoms in the cell).
Extra, we have executed several Replica Exchange (RE) simulations 20-50 thousand 5 fs-step long starting from random atomic configurations with all three elements, in the temperature range from room up to the respective melting point, again, with no new unexpected results. These were either simulations with fixed boundary conditions (coverage) or complemented by energy cost function scaling either linearly with surface (surface energy) or quadratically with the departure of a coverage from its initial value, emulating through the stiffness constant some kind of elastic penalty for the sample thickening, which we would like to artificially suppress.
RE is a particular example of a delicate trade-off between precision and computational cost, since several simulations are running at once, calling for as moderate KPOINTS, ENCUT and POTIM, as possible. In the Sn case, we ended with (3 3 1) KPOINTS, while Si and Ge demanded at least 3 specially chosen KPOINTS and even those may not be enough, since Si slabs melted below 1030 K at default value of ENCUT and 5 fs time-step. It is indeed surprising that even single Ba atom addition to our several-dozen-atom periodic cells of free-standing thin-film samples, does not lead to a solo clathrate cage. We hope that the present work stimulates further research (with enhanced values of all the parameters) towards this goal.
N.B.: All samples obtained by means of AIMD, MLFF and RE were finally DFT-relaxed and only energies after DFT relaxation are stated in this text. Hence accuracy of MLFF enters the results – Figure 6 – in no way.
Atomic Structure, Termination, Thickness, Reconstruction: Definitions
Atomic Structure.
Vast majority of the slabs were carved out from the known bulk phases, described in § 4, by planar sections. The second way to Column-XIV thin films led through the ab initio Molecular Dynamics introduced in Subsection 3.2. Except for Sn – a borderline case between metal and semiconductor – the work deals exclusively with allotropes where all atoms exhibit more or less tetrahedral environment with quartet of nearest neighbours forming average bond angle around .
All the known high-pressure allotropes more than 50 meV/at. above the respective cubic diamond (cF8) phase, such as BC8, R8, ST12, BT8 [47], mC16, bc5-t [48], obtained chiefly by (de)compression, were avoided [see Table S1.1, SM, for phases that were taken into account], since the main goal is to predict stable slabs with lower internal energy per atom compared to the corresponding diamond slabs of the same thickness. The only exception will be the amorphous phases, due to the intention to crystallize stable clathrate slabs from the melt and owing to their inherent indifference to the structure of a substrate, in contradistinction to diamond or clathrates.
| Config. | C | Si | Ge | Sn | Pb |
| fcc | 4573 | 608 | 331 | 75 | -3.598 |
| bcc | 4367 | 587 | 341 | 86 | 42 |
| graphite | -9.231 | 640 | 602 | 570 | 719 |
| hP1 | 971 | 352 | 243 | 45 | 96 |
| tI4 | cF8 | 328 | 228 | 46 | 128 |
| cF8 | 131 | -5.420 | -4.516 | -3.863 | 251 |
| lonsdaleite | 155 | 11 | 18 | 16 | 292 |
| clathI | 239 | 64 | 33 | 28 | 279 |
| clathII | 205 | 54 | 27 | 23 | 280 |
| clathIII | 260 | 81 | 48 | 40 | 288 |
| clathIV | 243 | 69 | 38 | 31 | 276* |
| deca | 241 | 71 | 41 | 35 | 299* |
| icosa | 288 | 92 | 59 | 49 | 274* |
| CFS-6 | 241 | 55 | 35 | 30 | 286 |
| CFS-5 | 263 | 41 | 39 | 36 | 289 |
| T12 | 238 | 45 | 36 | 32 | 278 |
| amorph | – | 158 | 128 | 91–101 | – |
Table S1.1. Bulk energies of famous Column-XIV allotropes, that were taken into slab internal-energy competition, see Section 4 in the main text. Internal energies of 17 bulk configurations of G4 elements after cell and atomic relaxations starting from sound initial atomic positions and lattice parameters. cF8 stands for the cubic diamond phase; lonsdaleite (wurtzite) is the hexagonal diamond polytype with eclipsed bond conformations. “deca” stands for “decagonal clathrate approximant”, Pearson symbol oP392. “icosa” means “icosahedral clathrate approximant”, cI920. “clathI” (cP46), “clathII” (cF136), “clathIII” (hP40) and “clathIV” (tP172) denotes type I, II, III and IV clathrate, respectively. “CFS” means Chiral Framework Structures (including T12), see Subsection 4.6 (of the main text). “amorph” denotes -amorphous phases of Ge and Si, visit Subsection 4.5; for Sn the lower bound corresponds to a-metal, whereas upper bound to an abstract a- Sn obtained by a-Ge rescaling to the typical Sn interatomic distances. Kohn-Sham energies in eV/atom of the most stable (GS) structures are highlighted by red. GS energies have been subtracted from the remaining energies and the corresponding differences are stated in units of meV/atom for easier comparison of distinct elements. * – amorphized or strongly deformed during relaxation process. Without former annealing or external strain. Converged on K-points with default VASP DFT PAW GGA (PW91) ENCUT-s.
Extra, atomic configurations directly related to diamond, such as hexagonal diamond (lonsdaleite), so called diamond polytypes, were also excluded from the competition, as brand new materials bearing novel properties are in the sights.
Termination.
From now on, termination is a particular orientation and position of a cutting plane with respect to a bulk crystal, producing planar slab of constant thickness:
Thickness.
of a slab is measured by the coverage defined by:
where stands for the number of atoms per surface area of a periodic cell. Individual cases of planar terminations suitable for each bulk phase are listed in the next § 4.
For the sake of simple comparison, coverage will be measured in dimensionless “monolayer” (ML) unit, one ML corresponding to value of a single (111) layer of cubic -phase (cF8, diamond) of either Si, Ge or Sn.
Reconstruction.
Hereafter, by reconstruction we mean addition of atoms of the same kind, adatoms, (i.e. Sn atoms in the Sn-slab case) to the film’s surface followed by DFT relaxation of both the atomic positions and lattice parameters. We did not attempt any hydrogenation, whereas “bare” surfaces after cell and atomic relaxation will be called anyway “unreconstructed”.
Particular instances of surface reconstruction shall be specified for each parent bulk phase and for every termination thereof in the next § 4.
Slab Stability Assessment
Due to the intrinsic positivity of the surface energy there is a general trend of decreasing per-atom energy with slab thickness. At the same time, flat slabs occur at discrete, characteristic values of coverage and energy per atom. Hence, we seek after energy-minimizing slab structures for a given coverage , corresponding to certain slab thickness.
Let’s consider two directly constructed points , e.g. a couple of (111)-diamond slabs with distinct thicknesses , with energies per atom , , respectively, which may differ in type of surface reconstruction, hence in the value of surface energy . An interpolation between the points has a meaning of a terrace of energy such that and coverage such that between the two slabs, whose contribution to the overall energy-per-atom of the whole system tends to zero for periodic boundary conditions (PBC) tending to infinity. Because energy, surface and number of atoms per periodic cell are additive quantities satisfying4:
the linear interpolation follows:
corresponding to this particular interpolation on the graphs :
The aim of this sort of graphs is to compare thin-film energy per atom, , of different atomic configurations, terminations and reconstructions for the common intermediate coverage , not associated with any planar slab structure already measured.
In the simplest case of a constant surface energy , hyperbolic trends (5) of the curves for each structural family of slabs, cf. Figure 6, can be derived directly from the definition of the surface energy:
where is energy per slab’s atom, is overall energy per periodic cell with the total of atoms, is energy per one atom of the respective bulk phase and is thin-film coverage (possessing two faces, hence the factor “2” in Equation (6)).
In the case of layered growth mode with constant surface energy of a thin film and/or in the close vicinity of the scattered points in Figure 6, the hyperbolic dependence (6) describes slabs with (non-)integer number of layers. Each point of the hyperbolic convex hull can be thus assigned an (in)complete slab; incompleteness meaning a slab with a terrace.
The free-standing slab setup with PBC (periodic cell extended vertically in the direction to include vacuum gap between periodic images of a slab) introduces specific constraints: for systems with lattice parameters up to few tens of Å, it effectively hampers formation of non-planar bulky morphologies (e.g. nanowires, nanoparticles). Importantly, all the slabs in current simulations are only metastable – stabilized by artificial effect of finite PBC – whose increase would progressively lead to spontaneous transformation to nanowires and nanoparticles, respectively, owing to the of G4 sp elements.
While this phenomenon actually helps studying slabs as templates for adlayers that might form on an appropriate substrate by wetting, it have to keep in mind that our simulations do not fairly assess the tendencies to possible island formation [33], once the material is deposited on a substrate. Questions related to dewetting are actually highly relevant for sp-type adlayers [49], e.g. silicon on an insulator.
Competing allotropes
Monolayers
Stabilizing reconstruction evidently depends on the layer thickness. Singular point are monolayers, displaying just one atomic layer to reconstruct. However, there are infinitely many ways to do so.
As for Sn, Ge and Si, clear choice [9, 14, 50] are various reconstructions on (111)-diamond monolayer, so called stanene, germanene and silicene, see Figure 1. Because the basic reconstruction unit is dumbbell, we will call them hereafter db-monolayers [14].

Figure 1. Four reconstructions – MoS, hP10, hP11, oP10 – of (111)-diamond Sn, Ge and Si monolayers: top – front view; middle, bottom – side views. Solid blue line delimits periodic cell excluding vacuum. Red balls designate adatoms. under Pearson symbol stands for the area-density of adatoms expressed through typical length unit : the distance between nearest neighbours on a sublattice of a bipartite (111)-diamond lattice; for bulk diamond structure Å, Å, Å. Indicated unit cell sizes in universal units of and are just for better orientation in various cross sections; here we assume idealized planar projections made of regular hexagons with edge length (i.e. we neglect lattice corrugations and distortions due to the chemical bonds, e.g. with red adatoms).
Even though each dumbbell constructed on germanene (silicene) lowers per-atom-energy, MoS configuration, corresponding to the full coverage, has branches with imaginary frequencies in ab-initio phonon spectra indicating mechanical instability [14]. The ground state of (Sn, Ge, Si) db-monolayer is therefore non-trivial and requires systematic investigation.
For every admissible dumbbell density per unit area in the given supercell – from minimal zero stanene density up to the maximal MoS dumbbell density – all dumbbell configurations were tested for the resulting internal energy per atom and plotted as a function of coverage , see Subsection 3.4. We have chosen oP10 supercell with originally 32 stanene atoms (without adatoms). Adatoms were placed just on one sublattice of the bipartite stanene lattice followed by the systematic elimination of the symmetrically equivalent adatomic configurations.
For both germane and silicene, oP10 minimizes internal energy per slab’s atom, cf. Figure 6. On the contrary, all the candidate db-monolayers, succumbed in the course of AIMD simulations, starting from random atomic positions and from hP10 db-stanene as well, to a web of interconnected Sn clusters, Sn-web, (Figure 2) in the Sn case for the given coverage, Figure 6, accompanied by an internal energy decrease. This is our new theoretical prediction, which has not been corroborated by experiment yet. For example, hP10 db-stanene (), 160 atoms per periodic cell, transformed into a web of Sn clusters at relatively high temperatures between 559–600 K, lowering the internal energy by 30 meV/at. in the fixed cell.
As it shall be explicitly illustrated by an example of bilayers, Subsection 4.4, Sn due to its metallic temper favours 6-coordinated atoms resulting in genuine G4 bond-angles equal to 60° (Figure 4, typical of a-Ge and a-Si surface[51]) and 109.5° dominant in a Sn-web to purely sp-like coordination of 4, accompanied by “factitious” bond angles 54°, 66°, 72°, 129°, enforced by the arrangements depicted in Figure 1.

(a)

(b)

(c) Top: Typical surface of a-Si: most of the atoms are 4-coordinated yellow balls, blue balls are -bonded atoms, green balls are -bonded and magenta atoms possess two bond angles and one . There are two atoms with even sharper pyramidal bonding geometry of . Periodic cell without vacuum is delimited by blue line. Size of a ball is proportional to its distance from the observer. Middle: Side view of the corresponding a-Si 4.3ML-thick slab. On the top panel, just 7Å-thick layer from the surface is depicted. Bottom: Bond-angle distributions of the best bulk a-Si and a-Ge without defects, produced by DFT on-the-fly trained VASP MLFF, fitted by gaussians, compared with thick slabs of the same material.
Figure 4.
Diamond
As a reference for elemental Sn, Ge and Si diamond slabs (no mention of carbon in this work!), we have chosen (111)-terminated ones. It has been shown by numerous experimental and theoretical groups that (111)-diamond section of Sn[28], Ge and Si [22, 23, 24, 25, 26, 27] is a cleavage face possessing the lowest surface energy among all the cubic-diamond (cF8) bulk sections. Note that this statement is valid just after proper bulk surface reconstruction[22, 24].
Several reconstructions of (111)-diamond surface have been compared: , , , [29, 32], DAS, DAS[31], but the variation of the per-atom energies turned out to be negligible with respect to the clathrate-diamond differences above 3 ML slab’s thickness, cf. Figure 6. Mind that below, say, 10 ML surface states or surface atoms cannot be distinguished since practically all atoms belong to the surface[24], so the notion of the surface energy is not relevant here.
Clathrates
Clathrate Terminations
We have investigated all planar sections of clathrate types I-IV, leading to equilateral-/isosceles-triangle, square and rectangle in-plane tilings and combinations thereof, Table 1. To every such orientation of a section plane with respect to a bulk clathrate there are four distinct terminations[33], e.g.:
schematically depicts the 4-layer Triangular-tiling period in the “z” direction perpendicular to the section plane (shared by both isosceles and equilateral triangle, likewise for the square and rectangle tiles) of puckered terminal planes with characteristic “holes” – , – alternating with flat terminal planes displaying “caps” around the tile vertices: , , consult Figures S2.1 and S3.1 (SM) for decagonal (iso-tri, rectangle) and dodecagonal tiles (equi-tri, square), respectively.
Note that the only exception from the rule (7) comprises trio of (111)-terminations of type-II clathrate where planes are missing. These very missing flat planes of clathrate-III 6-caps, Figure S2.1 in SM, act as a bridge between type-II and type-III clathrates, representing the only difference between the two.

Figure S2.1. Reconstruction of decagonal Sn, Ge, Si clathrate tiles: isosceles triangle (T) and rectangle (R) terminated by cage “caps” (c) and “holes” (h). Adatoms (beneath the original atoms, inside the film) highlighted by red rings. 3-coord. atoms before the reconstruction marked with central blue dots, the rest are 4-coord. atoms. Side lengths distinguished by blue (longer) and yellow (shorter) color. Sides that fit together marked with green crosses, rectangles.
Explicit clathrate construction, i.e. atomic decorations of clathrate tiles mentioned above, was achieved via symmetry-preserving dual transformation[54, 55] of the respective Frank-Kasper (FK) phases. Equally, orientation of section planes was inspired by the well-known FK atomic planes, linked by dual transformation to the planes of clathrate-cage centers. It turns out that these are the section orientations yielding planar clathrate slabs containing at least 3-coordinated surface atoms, completely without terraces or cages sticking out from the surface.
This, however, is not the whole story about sensible clathrate construction. terminations, since each clathrate cage itself represents an object with at least 3-coordinated surface atoms, even when entirely isolated. Adding 5-caps or 6-caps onto puckered and planes does not change the surface density of unsaturated (so called dangling) bonds. Therefore, we expect that the growth mode of a clathrate will be either pure island or mixed island-layer type, depending on the energy scales related to the processes of (1) completion of a surface cage and (2) coalescing cages together [33].
Clathrate Nomenclature
We shall designate clathrate slabs according to the element, the associated clathrate tile corresponding to particular orientation of a section plane with respect to a bulk clathrate phase and the thickness measured by number of (111)-diamond monolayers , Table 1. For the sake of concise and uncluttered notation, unless otherwise stated, the respective will be rounded to the nearest integer value except for half-integers and optimal surface terminations with energy-minimizing reconstruction, detailed in § 7, for the given coverage are meant.
| type | Pearson | sect. | tile | notation |
| I | cP46 | (100) | square | Si.square-I-N |
| II | cF136 | (110) | iso-tri | Si.iso-II-N |
| II | cF136 | (111) | equi-tri | Si.equi-II-N |
| III | hP40 | (001) | equi-tri | Si.equi-III-N |
| III | hP40 | (100) | rectangle | Si.rect-III-N |
| IV | tP172 | (001) | equi-tri + square | Si.dodeca-IV-N |
| – | oP148 | – | iso-tri + rect. | Si.deca-N |
Table 1. designation of an -monolayer-thick planar slab cut from the parent bulk clathrate, for which Pearson symbol is stated, by planar section with the respective clathrate tile information. Decagonal R2T4 approximant[33] (oP148) does not belong to any canonical clathrate I–IV type
Clathrate Reconstruction
Here we describe, for the first time, the optimal surface-energy minimizing reconstructions of planar clathrate sections listed in Table 1 for each of the four terminations from Equation (7).
The basic reconstruction element is again dumbbell, but unlike (111)-diamond surface termination, surface adatom S is located beneath some group of 3-coordinated surface atoms, whose dangling bonds it should saturate.
There are three basic positions[33] of a clathrate-surface adatom S (Figures S2.1, S3.1 in SM):
Under cage faces aka “caps”:
1a. Under 5-gonal cage facets: , , , .
1b. Under 6-gonal cage facets: , , .
Dumbbell under the 3-coordinated atom with:
2a. all neighbours 4-coordinated: , , , .
2b. two neighbours 3-coordinated: , , .
2c. three neighbours 3-coordinated: .
Midedge position: under the bond of 3-coordinated atoms: , , .
Tin-Specific Phases
Unlike Ge and Si, tin owing to its position at the bottom of Column-XIV lies on the borderline between semiconductors (C, Ge, Si) and metals (Pb), clearly exhibiting metallic properties at ambient conditions. At the level of (111)-diamond bilayer () square and hexagonal metallic Sn films are competing with one another, Figure Figure 3. The couple of metallic phases are designated as “squares” and “triangles” in result Figure Figure 6.

Figure 3. Two Sn thin-film metallic phases: square and hexagonal. Upper panel a.: Square Sn bilayer: front view and side view, firstly published in [21]. Lower panel b.: Hexagonal Sn bilayer: front and side view, yet unpublished, discovered via long MD DFT room-temperature runs in our work. Bottom panel: histograms of number of atoms per unit cell (delimited by blue line, excluding vacuum) per given coordinate perpendicular to the bilayer plane. Both phases have the front atoms exactly above the bottom atoms of a bilayer in the direction. Direction of view is indicated by arrows.
Whereas square Sn-I phase constitutes the ground state of Sn bilayer[21], hexagonal counterpart emerges during long MD or Replica Exchange (RE) annealings at room temperature. These observations suggest that hexagonal phase is favoured by (vibrational) entropy, corroborated by numerous defects of hexagonal polymorphs compared to the relatively perfect square one. All the metallic atomically-thin Sn films showed strong tendency towards the formation of even-layers.
Interestingly, both types of metallic bilayers can be viewed as two planar sections of -Sn phase[56, 57] in mutually perpendicular directions after symmetry breaking (slight displacement of a couple of atoms). Besides Sn9-web, Figure Figure 2, hexagonal Sn even-layers, are the second discovery of our DFT RE runs.
Despite being presented as stanene 4-layer, in the central Figure Figure 1a presumably is depicted triangular Sn 4-layer with hexagon centers filled with Sn atoms, experimentally prepared by non-equilibrium process: pulsed laser ablation of -Sn target floating on liquid hexane.
Amorphous Phases
Amorphous Tin.
As opposed to Ge and Si, in the case of bulk Sn there is no such a local minimum of the potential energy landscape deserving the title amorphous. More precisely, the aforementioned minima - even more than one mechanically stable structure - can be readily visited in the DFT universe; the real obstacle, however, resides in their experimental accessibility.
So as to observe a bulk-like amorphous Sn layer by quenched condensation on a cold substrate, it requires at least 8 atomic % of some other metal, e.g. Cu, and even then the resulting alloy crystallizes above approximately 20 K[58, 59, 60]. Another method – quenched simultaneous condensation of Sn and H on a substrate on nitrogen temperature – produces bulk-like amorphous semiconducting Sn, stable up to 180 K[61]. The other procedures include for example ion implantation of radioactive Sn isotopes [62], or intense electrolytic chemical reaction able to extract selected elements from the common precursor, such as sulphur from SnS crystal [63].
Possible realization through decompression of high-pressure intermediate obtained by compression of type-II clathrate[64] or -tin[48, 65] seems impracticable for tin, compared to Si and Ge, since analogically DFT-generated metallic Sn disordered liquid (90 meV/at. above -Sn) possesses by 10 meV/at. lower internal energy than sp-amorphous Sn gained by a-Ge rescaling to the typical Sn-Sn distances, Table S1.1, SM. This metallic liquid then readily transforms to various metallic crystalline phases of Sn. The phase space of Sn is much more complicated than that of Si and Ge, and may well hide yet unexplored and even unexpected allotropes [66], though.
Amorphous Silicon.
Surprisingly, bulk a-Si can be prepared completely faultless without any coordination defects showing perfect gaussian bond-angle distribution [67], Figure 4, around (almost ideal) tetrahedral bond-angle 108.6° with the standard deviation from the narrow interval 9 − 11° [68, 69, 70, 71, 72, 73]. This was also the case of our samples generated using VASP MLFF suite trained on-the-fly during ab initio heating from 300 K to 900 K of the quenched melt ( 5 fs-steps at 3000 K) followed by annealing at 900 K[74, 75, 76] ( MLFF 5 fs-steps) and slow cooling ( MLFF 5 fs-steps) back to room temperature within the standard DFT setup, Subsection 3.1. The density of thus prepared bulk a-Si, Figure 4, was 98.1% of -Si (cF8) value, its internal energy being 158 meV/at. above Si.cF8, Table S1.1 (SM), falling into the interval 0.09 − 0.17 eV/at. stated in the literature[70, 77, 78, 79].
The effect of thorough ab initio annealing and relaxation of a-Si surface has been validated in solo paper[51]. It has been proven that DFT treatment leads to the significant relaxation, namely to the p and sp hybridizations of 3-coordinated surface atoms, with average bond angles of 99.4° and 119.1°, respectively, quite distinct from 108° of 3-fold bulk atoms. This effect is sizable, since 3-fold atoms comprise of the surface; the rest consisting of sp- and 4% 5-coordination. Besides characteristic hybridizations, another intrinsic surface feature are 3-member rings accompanied by small 50° − 60° bond-angle peak, not found in the bulk a-Si distribution [51], approved by our DFT results, Figure 4.
The a-Si surface energy is supposed to be J/m[51], or 1.34 J/m[75]. The latter paper states somewhat large – larger than quoted experimental values 1.14 J/m[80], 1.23 J/m[81], 1.24 J/m[82], of ideal (111) diamond termination – but without proper annealing after a tearing test. (1 erg/cm = mJ/m and 1 eV/Å = 16.02176634 J/m) According to Materials Project [22], the surface energy of reconstructed (111) Si.cF8 surface is 1.30 J/m.
Our DFT computed (111) Si.cF8 unreconstructed surface has energy 1.57 J/m, its reconstruction[32] has surface energy J/m, in good agreement with literature. Our a-Si slabs with coverages ranging from 1.75 − 4.98 ML (for unit conversion: 1 ML = 0.15469 at./Å is the coverage of one Si diamond monolayer, 1 ML) possess energies from the interval 0.77−0.87 J/m or 48−54 meV/Å: as expected lower than (111)-cF8 termination; of partially crystallized (to cF8) a-Si samples attacking lower bound. Mind that computed value of a-Si strongly depends on the bulk a-Si energy via Equation (6) ( term), which, according to the literature, is from the relatively broad interval, see above. For further comparison, surface energy of the best reconstructed Si clath-II slabs, Figure 7, is 0.865 J/m, on the a-Si upper limit.

Figure 7. The structure of the most stable free-standing Sn (left panels), Ge (middle panels), Si (right panels) clathrate type-II thin films: their termination and reconstruction as a function of a chemical element. Shaded areas correspond to elementary-triangle clathrate tiles (isosceles for Si, equilateral for Ge and Sn). Periodic cell without vacuum is highlighted by solid blue line. Surface adatoms are bigger red balls. The integer in the sample’s label designates number of (111)-diamond ML in thickness (coverage ). Top: front view; middle, bottom: side views of the same slab. View directions are provided in parentheses.
Amorphous Germanium
Despite structural properties of bulk a-Ge being the same as those of a-Si, Figure 4, and despite bulk a-Ge contrasted directly via a-Si rescaling to the characteristic Ge-Ge distances succeeded by atomic relaxation, we have observed for the first time that a-Ge surface features are completely different, Figure 5. Note that elemental Ge thin films were in fashion in 1970s and 1980s, when DFT was still in its infancy, hence all we know about structural units of a-Ge (the Ge thin film) surface comes from DFT simulations of our own.

(a)

(b)
Figure 5. Top: Typical a-Ge surface obtained by VASP on-the-fly MLFF from the melt by repeated annealing at 646 K and slow quench to 300 K. Periodic cell without vacuum is delimited by blue line. Most of the surface atoms are (approx. -) 4-coordinated: yellow balls. Red balls: over-coordinated adatoms. Blue balls: dangling bonds, mainly associated with 5- and 6-caps. Bottom: 4.2ML-thick slab, whose surface is plotted above. On the top panel, just 8Å-thick layer from the surface is depicted.
The density of bulk a-Ge comprises 96.68% of the Ge.cF8 value and is by 128 meV/at. unstable at 0 K to diamond, Table S1.1, SM. a-Ge slabs were prepared by long annealing slightly below K, just as bulk a-Ge.
The surface energy of a-Ge slabs with characteristic 5-caps and 6-caps on the surface, Figure 5, lies in the interval (0.45 − 0.55) J/m or equivalently (28 − 34) meV/Å, approximately one half of unreconstructed (111) diamond, 1.07 J/m (Materials Project states the value 1.11 J/m [22]). These a-Ge clathrate-surface elements manifest themselves in the bond-angle distribution as a strong peak around 60°, Figure 4, even stronger than that of a-Si surface of different origin.
For further comparison, surface energy of (111) diamond can be lowered to 0.865 J/m by reconstruction, which is still much higher than a-Ge values. Surface energy of the best clathrate reconstructions, 5-caps and 6-caps with one adatom, consult Figure S2.1 and Figure S3.1 (SM) and Figure 7, are 0.734 J/m and 0.559 J/m, respectively, again attacking upper threshold of a-Ge range, like in the a-Si case (but substantially lower than of reconstructed Ge diamond surface).

Figure S3.1. Optimal reconstruction of dodecagonal Sn, Ge and Si clathrate tiles: equilateral triangle (T) and square (S) terminated by cage “caps” (c) and “holes” (h). For the explanation of the symbols and color scheme, consult Figure S2.1. Note that placing the “caps” on the top of the “holes” does not change the number of unsaturated 3-coordinated atoms (distinguished by blue central dots); this holds also for the decagonal cases, see Figure S2.1.
Chiral Framework Structures
To the best of our knowledge, the only sp G4 allotropes possessing lower internal energy per atom than type-II clathrate not structurally related to diamond are Chiral Framework Structures, CFS, or spirals: CFS-5 [83], CFS-6 [1] or NGS [84], T12 [85], see also Table S1.1, SM.
All three structures are fully sp-hybridized, displaying main peak of the bond-angle distribution around 109.5° and do not contain any imaginary frequences supporting dynamical stability of these allotropes at ambient pressure [83, 85].
Lattice Gas Monte Carlo (LGMC) algorithm was deployed to seek after the best planar terminations for thin films. An attractive toy potential was applied that favored two CN=3 surface atoms over a couple of CN=2, CN=4 atoms: thus simulations tend to produce surfaces similar to the unreconstructed (111)-diamond (or clathrate). Simulation itself was a multiply repeated cooling while recording the lowest-energy configurations (by our own program).
LGMC research of CFS-6 ended in two surface terminations normal to (120) and (001) directions [(001) is the axis of the main spiral with hexagonal cross section], subjected to subsequent reconstructions for several Si, Ge and Sn film thicknesses.
For both sections two surface reconstructions were attempted: adatoms were firstly placed below each bond joining a couple of unsaturated atoms – (001)-1, (120)-1 – and secondly to the valley between them – (001)-2, (120)-2. As concerns thicknesses above 3.5 ML (Si), relaxations have just effect on the slab’s surface; the interior remains spiral-like and does not change its phase upon relaxation [86].
Atomic and cell relaxations left (120) (un)reconstructed surface intact, while surface of (001) termination has changed substantially and manifested 3- and 4-coordinated atoms only. As for (001)-1 and (001)-2 reconstructions, adatoms move towards the spiral’s main axis, saturating as many dangling bonds of the surrounding spiral as possible.
As expected from the already probed clathrate-surface reconstructions, Subsection 4.3.3, the only successful attempt was (120)-1 for Ge and Sn, resembling midge reconstruction of clath-II tiles, cf. Figure S2.1, S3.1 (SM), which was forbidden for Si, Figure 6. Si CFS-6, which is energetically degenerated with clath-II bulk, can not be cut and reconstructed effectively, therefore only unreconstructed Si.CFS surfaces were included in Figure 6 summarizing the chief results.
(120) termination is clearly better than (001) owing to the smaller area-density of the coordination defects (dangling bonds) and the absence of 2-coordinated atoms, but both are worse compared to the best clath-II planar sections, Figure 7. Clathrates exhibit lower per-atom energy and lower surface energy for all three elements and thicknesses under question.
As for CFS-5, there are two equivalent sections in directions (100) and (010), with just 3- and 4-coordinated atoms. In this case, 3-fold atoms are arranged in 4-atom chains per periodic box, exhibiting highest area-density of coordination defects among all CFS sections already mentioned. Several solo-adatom reconstructions were attempted, none of them being successful at lowering energy-per-atom or even surface energy , so compositions of several such adatoms seem to be also useless (absent in Figure 6).
Finally, natural planar termination of T12 normal to (001) direction with exclusively 3- and 4-coordinated surface atoms is the same as (120) cut of CFS-6, since both structures are stackings of equal 3-atom thick layers, having almost the same bulk energy per atom, wherefore the reconstructions of T12 were not executed.
Results
Our principal results are coverage ranges for which clathrate slabs are the ground state with , where is energy of the closest competing structure, usually diamond. They are summarized in Table 2, Figure 6 (see also Figure S4.1, Figure S4.2 and Figure S4.3 in SM) and the surface reconstruction of per-atom-energy minimizing clathrate slabs corresponding to , where is maximal, are depicted in Figure 7. xyz-files of all stable thin films except for diamond are given in Section S9 (SM). Finally, in Subsection 5.4 a possible mechanism of electronic stabilization of clathrate thin films with respect to diamond ones is advocated.
| element | clath-II surface | ML | meV/atom | ||
| Sn | (111) | 3.2 | 3.2 | 10.0 | -35 |
| Ge | (111)&(110) | 2.5 | 3.4 | 7.4 | -34 |
| Si | (110) | 2.5 | 3.3 | 5.3 | -44 |
Table 2. Table 2 coverage intervals at which the ground-state slab is a clathrate (always type-II): columns and are endpoints of the clathrate stability intervals expressed in (111)-diamond-monolayer units (ML). is the “maximum energy gain” relative to competitors at

Figure S4.1. Comparison of per-atom energy difference between the most stable Sn clathrate slabs and Sn (111)-diamond ones for reconstructed and unreconstructed case.

Figure S4.2. Comparison of per-atom energy difference between the most stable Ge clathrate slabs and Ge (111)-diamond ones for reconstructed and unreconstructed case.

Figure S4.3. Comparison of per-atom energy difference between the most stable Si clathrate slabs and Si (111)-diamond ones for reconstructed and unreconstructed case.
Tin
For the lowest coverages below 2 ML, discontinuous structures are formed, depending on the size of a supercell. At ML, thread-like arrangements of Sn, Sn and Sn units [52, 53] turn into a Sn-web, Figure 2, Figure 6. These small Sn “houses” seem to be the energy-minimizing interface between metallic Sn bilayers with surrounding vacuum.
Around ML, uneven match among hexagonal and square metallic bilayers happens, Figure 3, designated as “triangles” and “squares” in Figure 6, respectively, squares being the clear winner by meV/at., Subsection 4.4.
Finally, above ML up to ML, clathrate slabs get a word in, Table 2, Figure 6. For more than ML, approaching the bulk limit, thin-film clathrates are surpassed by reconstructed thick diamond layers.
Internal-energy-minimizing clathrate films are (111)-cut of type-II bulk showing equilateral-triangle tiling in the section plane, Subsubsection 4.3.1, reconstructed equally by adatoms at the midedge positions (in the middle of each tile’s side), samples Sn.equi-II-N, , § 21.1 (SM) and Figure 7. Owing to its metallic behaviour, Sn favours the highest area-density of adatoms from amid Group IV; this particular reconstruction presenting such an example, cf. Figure S3.1 (SM), resulting in 1.5 adatom per triangle tile – the largest admissible clathrate adatomic surface density.
As concerns CFS, Subsection 4.6, the best reconstructed surface, CFS-6 (120)-1, possesses both higher area-density of defects (in the form of 3-coordinated atoms) as well as greater bulk per-atom-energy, thus dropping out of the game, Figure 6.
Germanium
The most stable Si and Ge monolayer is oP10-reconstructed germanene and silicene, Subsection 4.1, Figure 6. Unlike metallic Sn, there is no known (meta)stable Ge or Si bilayer. Above ML clathrates clearly reign stable-thin-film configurational space, starting with Ge.iso-II-2.5 (S9.2.2 in SM) one-cage thick isosceles-triangle (110)-cut of type-II bulk composed of combined tiles, Figure S2.1 of SM, reconstructed by solo adatom per tile (i.e. without midedge adatoms in tiles).
Next, in the thickness range ML, Table 2, just as in the case of Sn, (111)-cut clath-II films designated as Ge.equi-II-N, , § 22 (SM), are by far most stable. This time, however, the best termination are markedly deformed 6-caps, Subsubsection 4.3.1, with one adatom each. The net result of thorough AIMD annealing and subsequent relaxation is transition of 6-cap to effectively 5-cap plus one atom, Figure 7, for all the Ge.equi-II-N samples. The configurational space above ML is obviously a bulk limit, where diamond films become dominant, regardless of reconstruction, Figure 6.
As CFS layers are concerned, the concluding remark from the preceding Subsection 5.1 holds, the best CFS-6 (120)-1 moving even further away from the convex hull compared to Sn.CFS-6.
Silicon
The area-density of adatoms gradually decreases in the sequence Sn → Ge → Si. From the G4, Si is most sensitive to adatom addition, unequivocally favouring isosceles-triangle (110)-cut of type-II bulk composed of combined tiles, Figure S2.1 of SM, in the whole range of Si clathrate-thin-film stability: ML, Table 2, resulting in samples labeled Si.iso-II-N at discrete thicknesses , § 23 (SM). Like in the Ge case, they are reconstructed by solo adatom in the middle of tile (i.e. without adatoms at midedge positions).
According to Figure S4.1, Figure S4.2, Figure S4.3 (SM), clathrate films are already winning by cheaper surface termination before surface reconstruction, but proper reconstructions render them another important advantage over the diamond slabs.
As expected, for Si, the best CFS surface is unreconstructed, Figure 6, almost overlaying high-energy amorphous curve far from the overall convex envelope.
Note that despite the lower surface energy for both a-Ge and a-Si, Subsections 4.5.3 and 4.5.2, respectively, the stability of clathrate (and even diamond) slabs over amorphous ones, Table 6, is secured by their bulk energy, Table S1.1 (SM).
Electronic Stabilization of Clathrate Films
Electronic densities of states (eDOS) of the most stable Sn, Ge and Si clathrate slabs are displayed in Figure S8.2 (SM). Clathrates definitely enhance the tendency of the sp elements towards bandgap formation – this is clearly visible already in the bulk, see Figure S8.1 (SM).
Trends are evident both with respect to clathrate/diamond competition and as a function of coverage, because the thinnest 2.5 ML-slabs (samples Sn.equi-II-2.5, Ge.iso-II-2.5, Si.iso-II-2.5) exhibit distinct eDOS as well as ML-thick ones (samples Ge.equi-II-3.5, Si.equi-III-3.5), whereas eDOS of thicker slabs approaches the bulk limit.
Comparing clathrate vs. diamond, ultrathin slabs confirm and enhance clathrate tendency for the gap formation, while the reconstructed diamond slabs tend to fill the electronic states just above or even across the Fermi energy. This trend must be the substantial reason for the enhanced clathrate stability.
Looking at the slab width variation, it is obvious that 2.5 ML-slab eDOS stand out loosing any correspondence with the bulk. 3.5 ML-thick Ge and Si slabs are distinguished by their bandgaps reaching the bulk-bandgap width, and are broader than bandgaps of thicker slabs of the same kind. These results are further substantiated by calculated values of electronic band gaps of the most stable slabs, Subsection S10 of SM, showing that clathrate thin films exhibit wider gaps (of the order of eV in the thickness range considered, ML) compared to the diamond ones of the same thickness.
Discussion
Here we attempt to crystallize the most stable clathrate thin films from the melt to directly prove the chief results of our work, Figure 6 and Figure 7. The highest expectations are from the a-Ge slabs, owing to the promising spontaneously reconstructed surface – 5caps and 6-caps with one or two adatoms, Figure 5 – that might serve as a condensation centers for clathrate cages.
Crystallization of Free-Standing Molten Si Slab
a-Si slabs, energetically unstable at 0 K with respect to both diamond and clathrate slabs for any coverage , Figure 6, crystallize exothermally into diamond after annealing at K; the thicker slab the higher annealing temperature (due to the higher cohesive energy; K constituting the bulk limit). All of our a-Si slabs were prepared either by long DFT MD (on-the-fly VASP MLFF) annealing slightly below or by Replica Exchange method covering the temperature range .
In particular, partial crystallization of 3.2 ML-thick a-Si slab into cF8 was accompanied by 36 meV/at. energy release while annealing at 900 K and cooling down to 300 K. a-Si slabs of coverages ML and 4.4 ML lowered their internal energies by 28 meV/at. and 30 meV/at. during the same procedure, respectively. Crystallization of 5.0 ML-thick slab required annealing temperature at least 1000 K. The exothermic change of a-Si phase is an evidence that amorphous slabs can not compete with more stable diamond ones at 0 K at any coverage.
Crystallization of Free-Standing Molten Ge Slab
Unlike a-Si bulk surface containing exclusively p-, sp- and sp-bonded atoms, Figure 4, a-Ge surface displays characteristic 5-caps and 6-caps with one or two adatoms, Figure 5, which can be regarded as nuclei of clathrate cages. Therefore we attempted to crystallize one of the most stable free-standing clathrate films – Ge.equi-II-3.5 – from the melt in fixed-volume simulation, Figure S6.1 (SM). Initial atomic configuration before melting can be found in Subsubsection 9.2.4 (SM).

Figure S6.1. Spontaneous re-crystallization of free-standing initially symmetrical Ge film, sample designated as Ge.equi-II-3.5 in the main text, see Subsubsection S9.2.4 for the atomic coordinates.
Slow cooling down of 3000 K-melt to room temperature in MD fs-steps produced (from both faces) symmetrical disordered slab composed mainly of eclipsed hexagons and pentagons, 120 meV/at. above original clathrate Ge.equi-II-3.5 48-atom sample.
Subsequent annealing 520 K → 350 K in MLFF fs-steps resulted in asymmetrical diamond film with dumbbell reconstruction from one side and kind of warts from the other, Figure S6.1 (SM). This diamond slab, not surprisingly, was still 45 meV/at. above initial clathrate Ge.equi-II-3.5 sample.
A couple of long zero-pressure MLFF annealings at 450 K (or 400 K) and subsequent slow cooling to room temperature – steps 5 fs each – of 192-atom sample supercell of 48atom Ge.equi-II-3.5 slab] in fixed periodic cell produced several characteristic 5-, 6- and even 7-cap features on the slab’s surface like in Figure 5, but with no vital signs of a clathrate cage. Phase transition to the original clathrate slab (before melting) was prohibited by a kinetic barrier, as the slab got stuck in amorphous configuration. The same holds for 240-atom sample shown in Figure 5, starting from random atomic positions, annealed millions of 1 fs-steps at fixed 650 K temperature (of bulk a-Ge to cF8-Ge transition) and cooled to room temperature during steps (ought to be longer).
There was just one purely MD simulation (before the advent of MLFF in VASP) with 150-atom slab at fixed temperature 400 K, half million of 5 fs-steps long, starting from random atomic positions, that produced single reconstructed clathrate cage.
Since transformation of the-best-clathrate-slab melt into a diamond one (cubic, not lonsdaleite) was well reproducible in many Si and Ge cases of distinct thicknesses, we assume that clathrates are kinetically forbidden. Next we shall try to crystallize them on specially designed clathrate-matching substrates [2].
Crystallization of Molten Ge Slab on InN
Even more interesting is the (re)crystallization of the same molten Ge.equi-II-3.5 layer on coherent InN binary-diamond substrate. The coherency of such an interface was the objective of article [2], where it has been shown that InN wafer gives Ge type-II or type-III clathrate growth fundamental advantage: its bulk-lattice misfit equals 2.3% instead of 12.6% misfit of Ge diamond film on the same InN substrate.
Recrystallization of Ge.equi-II-3.5 on InN led unexpectedly to a thin disordered Ge film connected with InN via a crystalline layer of regular 5-gons. Figure S6.2 (SM) [see Subsection S9.4.1 for initial xyz-file], 54 meV/at. above the original clathrate-diamond interface. The final result is probably due to the very 5-gonal buffer layer, which, as opposed to the coherent clathrate-diamond interface, saturates all the bonds from the diamond side. As has been already pointed out [2], clathrate is able to saturate at most 6 out of 9 dangling bonds on the diamond surface, Figure S6.3. Even more can be observed: not just all bonds of the substrate are saturated, but all bond angles with vertices at the substrate atoms are around the ideal tetrahedral angle (), Figure S6.5, Figure S6.8. Ge melt constitutes an intermediate situation between Ge clathrate and recrystallized Ge layer from the point of view of bond angles; all N bonds are saturated even by the melt, Figure S6.4, Figure S6.7.

Figure S6.2. Spontaneous re-crystallization of Ge films on InN. Starting from the thinnest clathrate film with 6-caps, see Subsubsection S9.4.1 for the atomic coordinates.

Figure S6.3. Coherent clathrate/diamond interface made up of Ge/InN.

Figure S6.4. Interface between diamond and clathrate melt after dt = 7 fs-steps at 1240 K, according to roadmap S6.2.

Figure S6.5. Interface between diamond and re-crystallized clathrate melt according to Figure S6.2.
!Interface between diamond and clathrate melt, showing a 32-atom interface of Ge and N atoms, coordination-number tables, and a plot of P(θ) versus θ[deg.] with curves labelled Ge-Ge-Ge, Ge-Ge-N, and In-N-Ge. bbox=0.15,0.59,0.86,0.93
Figure S6.7. Interface between diamond and clathrate melt after dt fs-steps at 1300 K, according to Figure S6.6.

Figure S6.8. Interface between diamond and re-crystallized clathrate melt according to Figure S6.6.
The statement above holds for the nitrogen termination of InN substrate (from both sides), the more reactive element from the couple (In, N). If the substrate were terminated by In, it would not grant any benefit to an overlaying Ge clathrate at all. The same would be perhaps true for other electronically balanced substrates such as graphite or ZrO, were it not for the covalent bonds e.g. between graphite and Ge-clathrate-film adatoms, already witnessed in DFT relaxations of our own.
When exactly the same experiment was carried out with thicker Ge layer, Ge.equi-II-6, the same 5-gonal buffer monolayer linked InN substrate with adjacent cubic-diamond Ge thin film, Figure S6.6 (SM), with some disordered mess on its outer surface. Thus it can be concluded that it is the very Ge buffer layer playing first fiddle on a N-terminated substrate. Mind, on the other hand, that the final diamond layer is by 38 meV/at. worse compared to the original clathrate-diamond setup, see Subsubsection S9.4.2 for the initial xyz-file, so the reason for diamond Ge output is kinetic, as well.

Figure S6.6. Spontaneous re-crystallization of Ge films on InN. Starting from thicker clathrate film with 6-caps, see Subsubsection S9.4.2 for the atomic coordinates.
van der Waals Dispersion Correction
Karttunen et al. demonstrated that for silicon the dispersion interaction neglected in original PBE functional not only adds notable binding contribution of eV/at. to the bulk systems, but also impacts considerably on energy differences due to the approximately linear dependence of the dispersion energy on the atomic density[87]. The same picture emerges also for germanium[88]. Both cited sources point out effectiveness of the Grimme’s et al. dispersion correction implemented along PBE functional (“PBE-D3”) in VASP[90, 91] [89] in comparison with other ways of treating dispersion within the DFT framework. Thus the dispersion correction practically doubles between bulk clathrate and cubic diamond structure, from 50 to 100 meV/at. for Si, and from 30 to 90 meV/at. for Ge, concerning cubic type-II clathrate (Pearson cF136), owing to the somewhat higher density of the diamond phase[87].
However, the situation is different in the case of tin. According to references [88, 92] binding energy of cubic-diamond -Sn is described accurately by PBE without dispersion correction, while PBE-D3 leads to overbinding by a clear margin. Added to this, PBE-D3 overestimates dramatically dispersion energy of the metallic -Sn structure between and from 42 meV/at. in favour of to 43 meV/at. in favour of (!). Since vibrational free energy privileges (and we checked that the dispersion correction does not shift the phonon frequencies markedly), PBE-D3 contradicts the experimental fact the stable low-temperature phase being up to approximately room temperature.
In Figure S7.1 (SM), the effect of PBE-D3 correction on our results for Si and Ge is displayed (IVDW=12 in VASP), but we refrain from doing the same for Sn.

Figure S7.1. Change of the diamond-clathrate stability competition in response to the van der Waals dispersion correction PBE-D3 (ivdw=12), visit Subsection 6.4 in the main text.
Effect of a long-range dispersion interaction in general increases with the thickness of the slab culminating in bulk, so the thinnest films in the focus of the present study are afflicted to much lesser extent. Nevertheless – as expected, the range of clathrate-film stability has been considerably retrenched by dispersion correction for both Ge and Si.
The original interval of Ge clath-II stability, ML, Figure 6, reduced to ML, Figure S7.1, leaving single (out of 4 stable slabs without vdW) directly constructed thin film Ge.equi-II-3.5 of thickness (coverage) ML on the overall convex hull: its energetic advantage over the diamond slab of the same coverage diminished from 34 meV/at. to 24 meV/at. (both below the diamond slab).
The original interval of Si clath-II stability, ML, Figure 6, reduced to ML, Figure S7.1, leaving solo (out of 3 stable slabs without vdW) directly constructed thin film Si.iso-II-2.5 of thickness (coverage) ML on the overall convex envelope: its energetic benefit over the diamond slab of the same coverage lessened from 44 meV/at. to 23 meV/at. (both with respect to the diamond slab as well).
Conclusions
This work exposes intervals of stability of several-ML thick clathrate layers, namely [2.5; 7.4] ML for Ge, [2.5; 5.3] ML for Si and [3.4; 10.0] ML for Sn, where ML stands for the unit thickness of (111)-diamond monolayer of the given element. Column-XIV clathrate slabs are stabilized by means of the surface energy in two respects: cheaper terminations and higher energy gain by reconstructions compared to the diamond films, meaning that clathrate films possess lower surface density of unsaturated dangling bonds than any known termination of sp allotrope and can be reconstructed most effectively. Within these thickness ranges lower surface energy reflects in lower internal energy per atom, which is taken as a stability measure.
Natural planar clathrate terminations, as well as the recipe for their reconstructions have been described for the first time, being superior to their diamond counterparts from the point of view of the surface energy.
Combined (do)decagonal rectangle(square)-triangle clathrate tilings were not efficient in lowering internal energy per atom, with respect to the pure triangular ones.
Apart from clathrate thin films, we have discovered several Sn nanolayer phases during long MD runs at room temperature (200 – 400 K), namely Sn-web phase and hexagonal even-layers. In the latter case, the effect of entropy is playing decisive role in the layer stabilization since strongly defective triangular phase emerged at finite temperature and was presumably prepared during non-equilibrium processes[8], clearly far away (30 meV/at.) from the ground-state.
We hope that the present work instigates future experimental preparation of the suggested elemental stable clathrate thin films even in quasi-free-standing form on electronically balanced and/or amorphous substrates, whose novel unique properties would not be governed by the above-mentioned peculiar and often very complex intermetallic wafers (such as -Al-Pd-Mn or -Al-Ni-Co). Such a substrate should somehow disqualify the main rival - diamond - with respect to clathrates or could at least serve as a structure-neutral medium. The logical consequence would then be an investigation of influence of finite temperature on stability of clathrate thin layers.
Conflicts of interest
The author declares that she has no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Data availability
The data supporting this article have been included as part of the Supplementary Information.
Acknowledgements
I acknowledge support from grants VEGA 2/0144/21, APVV-19-0369 and APVV-20-0124. I also acknowledge opportunity to write this article and finish the calculations after the defense of my Dissertation Thesis [86] entitled “Search for Stable Clathrate Films within Elements from Column XIV of the Periodic Table”, under supervisor Dr. Marek Mihalkovič, containing vast majority of material for this article, at the Institute of Materials and Machine Mechanics in Bratislava. Calculations were performed at the Computing Center of the Slovak Academy of Sciences using the supercomputing infrastructure acquired under Projects ITMS 26230120002 and 26210120002 and EuroHPC grant no. 101101903 (supercomputer Devana). Part of the research results was obtained using the computational resources procured in the national project National competence centre for high performance computing (project code: 311070AKF2) funded by European Regional Development Fund, EU Structural Funds Informatization of society, Operational Program Integrated Infrastructure.
Note: Invisible hyperlinks (white places) at the corners of every page of this Supplemental Material (SM) bring you back to this Table of Contents (TOC).
Note: Invisible hyperlinks (white places) at the corners of every page of this Supplemental Material (SM) bring you back to this Table of Contents (TOC).
Comparison of Column-XIV Bulk Energies
Surface Reconstruction of Decagonal Tiles
Surface Reconstruction of Dodecagonal Tiles
Reconstructed vs. Unreconstructed Surfaces
Figure S4.1 and Figure S4.3 below implies that Sn and Si clathrate slabs possess clear energetic advantage over the corresponding (111)-diamond films of the same coverage already before surface reconstruction (addition of Si atoms to the slab’s surface followed by atomic-position DFT relaxation). However, the appropriate surface reconstruction is responsible for further energy decrease of clathrates with respect to the diamond rivals.
Notably, as can be observed in Figure S4.2, the opposite situation happens for Ge, where clathrate’s internal-energy advantage over diamond is markedly more pronounced for the unreconstructed slabs.
In all the graphs below, the region of clathrate film stability is highlighted by green shadow, compare with Figure 6 of the main text. Reconstructed slabs correspond to the unreconstructed structures (“reconstructed” = “unreconstructed” + adatoms) in each case. As for the reconstructed ones, the most stable clathrate and diamond films for each coverage from Figure 6 of the main text were chosen for comparison, confer Results section.
Comparison of Various Types of Clathrate Slabs

Figure S5.1. Stability comparison (DFT energy per atom at 0K) of seven types of Sn, Ge and Si clathrate thin films: clath-I square, clath-II equilateral triangle, clath-II isosceles triangle, clath-III equilateral triangle and rectangle, decagon and clath-IV dodecagonal tiling reconstructed according to Figure S2.1, Figure S3.1. Each cross represents one attempt for clath-tile reconstruction.
Crystallization of Clathrate Slabs from the Melt
van der Waals Dispersion Correction of G4 Slabs
Electronic Density of States: Clathrate Slabs & Bulk
xyz Files
Tin-Slab xyz Files
Sn9-web
Å ML, meV/at.
23.9138 0.00000 0.00000
0.00000 23.9138 0.00000
0.00000 0.00000 23.9138
100 atoms
0.96713 0.89507 0.02979 50 1 1
0.18163 0.30665 0.95156 50 2 2
0.00243 0.36734 0.04387 50 3 3
0.11868 0.91534 0.92111 50 4 4
0.18669 0.44073 0.96766 50 5 5
0.12692 0.38930 0.86865 50 6 6
0.81752 0.94640 0.91512 50 7 7
0.22004 0.78823 0.05703 50 8 8
0.88308 0.80335 0.06302 50 9 9
0.94704 0.92053 0.90656 50 10 10
0.08813 0.54847 0.12274 50 11 11
0.30671 0.70521 0.98685 50 12 12
0.04241 0.44174 0.94857 50 13 13
0.19810 0.35715 0.06952 50 14 14
0.86364 0.84115 0.85282 50 15 15
0.19066 0.17224 0.99467 50 16 16
0.42224 0.74919 0.03300 50 17 17
0.70438 0.93414 0.08492 50 18 18
0.54387 0.91304 0.98796 50 19 19
0.90148 0.00005 0.99533 50 20 20
0.44552 0.17554 0.93494 50 21 21
0.89188 0.65382 0.08673 50 22 22
0.08124 0.15403 0.07424 50 23 23
0.64025 0.85720 0.16452 50 24 24
0.93849 0.79543 0.94609 50 25 25
0.68329 0.64525 0.96937 50 26 26
0.98708 0.10118 0.00128 50 27 27
0.88829 0.53527 0.14043 50 28 28
0.07818 0.01873 0.03478 50 29 29
0.42503 0.29041 0.08684 50 30 30
0.24033 0.95059 0.90392 50 31 31
0.62870 0.00321 0.00457 50 32 32
0.18179 0.07626 0.08287 50 33 33
0.36438 0.36431 0.89509 50 34 34
0.98208 0.56142 0.06184 50 35 35
| 0.69423 | 0.89719 | 0.96087 | 50 | 36 | 36 |
| 0.50253 | 0.38736 | 0.05731 | 50 | 37 | 37 |
| 0.45773 | 0.04332 | 0.91417 | 50 | 38 | 38 |
| 0.82545 | 0.91695 | 0.04931 | 50 | 39 | 39 |
| 0.55073 | 0.81738 | 0.08054 | 50 | 40 | 40 |
| 0.06642 | 0.18467 | 0.94560 | 50 | 41 | 41 |
| 0.34977 | 0.85690 | 0.04637 | 50 | 42 | 42 |
| 0.10212 | 0.43689 | 0.07187 | 50 | 43 | 43 |
| 0.16142 | 0.63510 | 0.06777 | 50 | 44 | 44 |
| 0.80136 | 0.82302 | 0.96140 | 50 | 45 | 45 |
| 0.61960 | 0.67539 | 0.07927 | 50 | 46 | 46 |
| 0.10048 | 0.74935 | 0.06073 | 50 | 47 | 47 |
| 0.35541 | 0.10422 | 0.87435 | 50 | 48 | 48 |
| 0.77326 | 0.70727 | 0.90756 | 50 | 49 | 49 |
| 0.35139 | 0.54493 | 0.98922 | 50 | 50 | 50 |
| 0.44485 | 0.62899 | 0.97813 | 50 | 51 | 51 |
| 0.68230 | 0.80690 | 0.05652 | 50 | 52 | 52 |
| 0.60103 | 0.80739 | 0.95993 | 50 | 53 | 53 |
| 0.83374 | 0.50991 | 0.93448 | 50 | 54 | 54 |
| 0.09770 | 0.28042 | 0.05107 | 50 | 55 | 55 |
| 0.25804 | 0.82722 | 0.93791 | 50 | 56 | 56 |
| 0.23032 | 0.91394 | 0.03167 | 50 | 57 | 57 |
| 0.97614 | 0.66315 | 0.98586 | 50 | 58 | 58 |
| 0.45375 | 0.91336 | 0.09431 | 50 | 59 | 59 |
| 0.85835 | 0.63266 | 0.95822 | 50 | 60 | 60 |
| 0.32438 | 0.36599 | 0.10798 | 50 | 61 | 61 |
| 0.38238 | 0.80974 | 0.92592 | 50 | 62 | 62 |
| 0.31187 | 0.42331 | 0.99262 | 50 | 63 | 63 |
| 0.04016 | 0.95712 | 0.83578 | 50 | 64 | 64 |
| 0.42334 | 0.92829 | 0.96173 | 50 | 65 | 65 |
| 0.06181 | 0.05552 | 0.90817 | 50 | 66 | 66 |
| 0.77760 | 0.71842 | 0.03918 | 50 | 67 | 67 |
| 0.10963 | 0.54441 | 0.98974 | 50 | 68 | 68 |
| 0.23181 | 0.60240 | 0.95877 | 50 | 69 | 69 |
| 0.68340 | 0.56369 | 0.06703 | 50 | 70 | 70 |
| 0.17041 | 0.71722 | 0.95411 | 50 | 71 | 71 |
| 0.52931 | 0.10250 | 0.00184 | 50 | 72 | 72 |
| 0.28299 | 0.61421 | 0.08203 | 50 | 73 | 73 |
| 0.18144 | 0.04656 | 0.96071 | 50 | 74 | 74 |
| 0.09489 | 0.89037 | 0.04486 | 50 | 75 | 75 |
| 0.16146 | 0.80502 | 0.86034 | 50 | 76 | 76 |
| 0.90454 | 0.46266 | 0.03091 | 50 | 77 | 77 |
| 0.57583 | 0.95224 | 0.11153 | 50 | 78 | 78 |
| 0.44658 | 0.44157 | 0.95606 | 50 | 79 | 79 |
| 0.56200 | 0.68418 | 0.96535 | 50 | 80 | 80 |
| 0.95951 | 0.54163 | 0.93519 | 50 | 81 | 81 |
| 0.33026 | 0.08375 | 0.08606 | 50 | 82 | 82 |
| 0.44012 | 0.03100 | 0.05198 | 50 | 83 | 83 |
| 0.80761 | 0.55570 | 0.04933 | 50 | 84 | 84 |
| 0.32017 | 0.73529 | 0.11244 | 50 | 85 | 85 |
Table 3.
0.33400 0.29204 0.99652 50 86 86
0.67111 0.52100 0.93956 50 87 87
0.41257 0.58602 0.10125 50 88 88
0.06569 0.80185 0.94906 50 89 89
0.04873 0.31091 0.93358 50 90 90
0.33098 0.02608 0.97160 50 91 91
0.40518 0.46092 0.08388 50 92 92
0.45882 0.30776 0.96075 50 93 93
0.43056 0.16401 0.06316 50 94 94
0.61008 0.61374 0.87023 50 95 95
0.32467 0.16033 0.98493 50 96 96
0.53509 0.53990 0.93945 50 97 97
0.53490 0.58237 0.06596 50 98 98
0.15668 0.13509 0.87445 50 99 99
0.59489 0.47624 0.03422 50 100 100
triangles
3.55789 -0.00806 0.00000
-3.56552 4.68674 0.00000
0.00000 0.00000 28.0000
4 atoms
0 0.25 0.07803 50 1 1
0 0.75 0.92197 50 2 2
0 0.25 0.96739 50 3 3
0 0.75 0.03261 50 4 4
squares
5.72637 0.00000 0.00000
0.00000 5.72637 0.00000
0.00000 0.00000 20.5771
8 atoms
0 0 0.56989 50 1 1
0.5 0.5 0.56989 50 2 2
0 0 0.41700 50 3 3
0.5 0.5 0.41700 50 4 4
0 0.5 0.62798 50 5 5
0.5 0 0.35890 50 6 6
0 0.5 0.47756 50 7 7
0.5 0 0.50932 50 8 8
Sn.equi-II-3
12.44832 -0.00000 -0.00008
-6.22416 10.78059 -0.00011
-0.00022 -0.00049 34.25425
46 atoms
0.33338 0.05896 0.26941 50 1 1
0.94107 0.27436 0.26942 50 2 2
0.72567 0.66667 0.26941 50 3 3
0.70092 0.03421 0.26532 50 4 4
0.33337 0.29911 0.26533 50 5 5
0.96582 0.66667 0.26533 50 6 6
0.95506 0.28834 0.02648 50 7 7
0.33331 0.04491 0.02648 50 8 8
0.71162 0.66659 0.02648 50 9 9
0.33332 0.28934 0.02653 50 10 10
0.71067 0.04395 0.02652 50 11 11
0.95605 0.66661 0.02653 50 12 12
0.53980 0.46057 0.07974 50 13 13
0.53938 0.07916 0.07972 50 14 14
0.92083 0.46015 0.07974 50 15 15
0.75269 0.87046 0.21963 50 16 16
0.11783 0.24731 0.21964 50 17 17
0.12956 0.88219 0.21964 50 18 18
1.00000 0.99995 0.10916 50 19 19
0.66670 0.33332 0.19192 50 20 20
0.54890 0.46285 0.21964 50 21 21
0.53716 0.08599 0.21963 50 22 22
0.91402 0.45112 0.21965 50 23 23
0.74587 0.87267 0.07972 50 24 24
0.12686 0.25411 0.07975 50 25 25
0.12729 0.87309 0.07974 50 26 26
0.00003 0.99999 0.19192 50 27 27
0.66667 0.33329 0.10916 50 28 28
0.46594 0.53418 0.15057 50 29 29
0.46583 0.93171 0.15056 50 30 30
0.06830 0.53407 0.15058 50 31 31
0.59842 0.79912 0.15056 50 32 32
0.20077 0.40159 0.15058 50 33 33
0.20089 0.79923 0.15057 50 34 34
0.07730 0.41060 0.34526 50 35 35
0.12885 0.66668 0.32593 50 36 36
0.33338 0.46215 0.32593 50 37 37
0.33339 0.92276 0.34525 50 38 38
0.58947 0.66668 0.34525 50 39 39
0.53791 0.87120 0.32592 50 40 40
0.19051 0.52380 0.26067 50 41 41
0.33337 0.80952 0.26066 50 42 42
0.47623 0.66666 0.26066 50 43 43
0.83399 0.66656 0.10590 50 44 44
0.83265 0.16593 0.10590 50 45 45
0.33327 0.16728 0.10590 50 46 46
Sn.equi-II-5
12.46276 0.00004 0.00003
-6.23135 10.79309 -0.00004
0.00009 -0.00009 41.74180
74 atoms
0.33759 0.05312 0.21120 50 1 1
0.94690 0.28451 0.21120 50 2 2
0.71549 0.66242 0.21120 50 3 3
0.71549 0.05310 0.21120 50 4 4
0.33758 0.28451 0.21120 50 5 5
0.94688 0.66241 0.21120 50 6 6
0.95688 0.28649 0.01775 50 7 7
0.32957 0.04308 0.01775 50 8 8
0.71350 0.67043 0.01775 50 9 9
0.32957 0.28649 0.01775 50 10 10
0.71350 0.04311 0.01775 50 11 11
0.95692 0.67043 0.01775 50 12 12
0.61782 0.61360 0.27509 50 13 13
0.99573 0.38219 0.27509 50 14 14
0.38642 0.00428 0.27509 50 15 15
0.99572 0.61358 0.27509 50 16 16
0.38640 0.38218 0.27509 50 17 17
0.61781 0.00427 0.27509 50 18 18
0.53981 0.46019 0.06000 50 19 19
0.53981 0.07966 0.06000 50 20 20
0.92034 0.46019 0.06000 50 21 21
0.20780 0.79221 0.30980 50 22 22
0.20780 0.41564 0.30981 50 23 23
0.58436 0.79220 0.30981 50 24 24
0.74895 0.87449 0.17649 50 25 25
0.12551 0.25105 0.17649 50 26 26
0.12551 0.87449 0.17649 50 27 27
0.99999 0.00001 0.08775 50 28 28
0.66665 0.33335 0.33446 50 29 29
0.66665 0.33334 0.15183 50 30 30
0.54290 0.45710 0.17347 50 31 31
0.54290 0.08584 0.17347 50 32 32
0.91416 0.45710 0.17347 50 33 33
0.74857 0.87430 0.06230 50 34 34
0.12570 0.25143 0.06230 50 35 35
0.12570 0.87430 0.06230 50 36 36
0.41914 0.20960 0.31282 50 37 37
0.79040 0.58086 0.31282 50 38 38
0.79041 0.20960 0.31282 50 39 39
0.99999 0.00001 0.15577 50 40 40
0.66665 0.33335 0.08417 50 41 41
0.33332 0.66668 0.33051 50 42 42
0.46549 0.53451 0.11781 50 43 43
0.46549 0.93101 0.11781 50 44 44
0.06899 0.53451 0.11781 50 45 45
0.13203 0.86797 0.36675 50 46 46
0.13204 0.26412 0.36675 50 47 47
0.73588 0.86797 0.36675 50 48 48
0.59743 0.79873 0.11954 50 49 49
0.20127 0.40256 0.11954 50 50 50
0.20127 0.79873 0.11955 50 51 51
0.00375 0.38021 0.46855 50 52 52
0.61980 0.62359 0.46855 50 53 53
0.37638 0.99625 0.46855 50 54 54
0.37641 0.38021 0.46855 50 55 55
0.00375 0.62362 0.46855 50 56 56
0.61980 0.99625 0.46855 50 57 57
0.41297 0.20651 0.42629 50 58 58
0.79349 0.58703 0.42629 50 59 59
0.79349 0.20651 0.42630 50 60 60
0.33332 0.66668 0.39854 50 61 61
0.20761 0.79239 0.42399 50 62 62
0.20762 0.41528 0.42399 50 63 63
0.58472 0.79238 0.42399 50 64 64
0.66666 0.33335 0.40212 50 65 65
0.26433 0.13219 0.36849 50 66 66
0.86781 0.73567 0.36849 50 67 67
0.86781 0.13219 0.36849 50 68 68
0.33339 0.16671 0.08294 50 69 69
0.83328 0.16672 0.08294 50 70 70
0.83329 0.66661 0.08294 50 71 71
0.50003 0.49997 0.40335 50 72 72
0.99991 0.49998 0.40336 50 73 73
0.50002 0.00010 0.40336 50 74 74
Sn.equi-II-7.5
12.50059 -0.00001 0.00007
-6.25030 10.82582 -0.00009
0.00033 -0.00026 52.72611
108 atoms
0.33844 0.05386 0.16954 50 1 1
0.94615 0.28458 0.16954 50 2 2
0.71543 0.66156 0.16954 50 3 3
0.29003 0.95257 0.82048 50 4 4
0.66258 0.70993 0.82048 50 5 5
| 0.04743 | 0.33741 | 0.82048 | 50 | 6 | 6 |
| 0.66258 | 0.95257 | 0.82048 | 50 | 7 | 7 |
| 0.04742 | 0.70996 | 0.82048 | 50 | 8 | 8 |
| 0.29006 | 0.33742 | 0.82048 | 50 | 9 | 9 |
| 0.71542 | 0.05385 | 0.16954 | 50 | 10 | 10 |
| 0.33844 | 0.28458 | 0.16954 | 50 | 11 | 11 |
| 0.94614 | 0.66156 | 0.16954 | 50 | 12 | 12 |
| 0.95126 | 0.27947 | 0.02386 | 50 | 13 | 13 |
| 0.32823 | 0.04874 | 0.02386 | 50 | 14 | 14 |
| 0.72054 | 0.67177 | 0.02386 | 50 | 15 | 15 |
| 0.32823 | 0.27945 | 0.02386 | 50 | 16 | 16 |
| 0.72053 | 0.04874 | 0.02386 | 50 | 17 | 17 |
| 0.95125 | 0.67177 | 0.02386 | 50 | 18 | 18 |
| 0.67146 | 0.72021 | 0.97325 | 50 | 19 | 19 |
| 0.27980 | 0.95121 | 0.97325 | 50 | 20 | 20 |
| 0.04879 | 0.32854 | 0.97325 | 50 | 21 | 21 |
| 0.61790 | 0.61313 | 0.22015 | 50 | 22 | 22 |
| 0.99522 | 0.38211 | 0.22015 | 50 | 23 | 23 |
| 0.38689 | 0.00478 | 0.22015 | 50 | 24 | 24 |
| 0.99522 | 0.61311 | 0.22015 | 50 | 25 | 25 |
| 0.38688 | 0.38210 | 0.22015 | 50 | 26 | 26 |
| 0.61789 | 0.00478 | 0.22015 | 50 | 27 | 27 |
| 0.04878 | 0.72020 | 0.97325 | 50 | 28 | 28 |
| 0.67145 | 0.95120 | 0.97325 | 50 | 29 | 29 |
| 0.27978 | 0.32854 | 0.97325 | 50 | 30 | 30 |
| 0.54130 | 0.45870 | 0.05090 | 50 | 31 | 31 |
| 0.54130 | 0.08258 | 0.05090 | 50 | 32 | 32 |
| 0.91742 | 0.45870 | 0.05090 | 50 | 33 | 33 |
| 0.08230 | 0.54113 | 0.94596 | 50 | 34 | 34 |
| 0.45887 | 0.91770 | 0.94596 | 50 | 35 | 35 |
| 0.45887 | 0.54113 | 0.94596 | 50 | 36 | 36 |
| 0.20781 | 0.79220 | 0.24744 | 50 | 37 | 37 |
| 0.20780 | 0.41562 | 0.24744 | 50 | 38 | 38 |
| 0.58439 | 0.79220 | 0.24744 | 50 | 39 | 39 |
| 0.74926 | 0.87463 | 0.14250 | 50 | 40 | 40 |
| 0.12538 | 0.25074 | 0.14250 | 50 | 41 | 41 |
| 0.12538 | 0.87462 | 0.14250 | 50 | 42 | 42 |
| 0.87338 | 0.12662 | 0.85368 | 50 | 43 | 43 |
| 0.87338 | 0.74671 | 0.85368 | 50 | 44 | 44 |
| 0.25328 | 0.12662 | 0.85368 | 50 | 45 | 45 |
| 0.00001 | 0.99999 | 0.07199 | 50 | 46 | 46 |
| 0.00001 | 0.99998 | 0.92623 | 50 | 47 | 47 |
| 0.66666 | 0.33334 | 0.26717 | 50 | 48 | 48 |
| 0.66667 | 0.33333 | 0.12142 | 50 | 49 | 49 |
| 0.33335 | 0.66665 | 0.87583 | 50 | 50 | 50 |
| 0.54361 | 0.45639 | 0.13955 | 50 | 51 | 51 |
| 0.54361 | 0.08720 | 0.13955 | 50 | 52 | 52 |
| 0.91280 | 0.45640 | 0.13955 | 50 | 53 | 53 |
| 0.08246 | 0.54121 | 0.85570 | 50 | 54 | 54 |
| 0.45879 | 0.91754 | 0.85570 | 50 | 55 | 55 |
| 0.45879 | 0.54120 | 0.85571 | 50 | 56 | 56 |
| 0.75388 | 0.87693 | 0.05385 | 50 | 57 | 57 |
| 0.12307 | 0.24612 | 0.05385 | 50 | 58 | 58 |
| 0.12307 | 0.87693 | 0.05385 | 50 | 59 | 59 |
| 0.87645 | 0.12355 | 0.94334 | 50 | 60 | 60 |
| 0.87645 | 0.75286 | 0.94334 | 50 | 61 | 61 |
| 0.24714 | 0.12355 | 0.94334 | 50 | 62 | 62 |
| 0.41952 | 0.20977 | 0.25007 | 50 | 63 | 63 |
| 0.79024 | 0.58048 | 0.25007 | 50 | 64 | 64 |
| 0.79024 | 0.20977 | 0.25007 | 50 | 65 | 65 |
| 0.00001 | 1.00000 | 0.12575 | 50 | 66 | 66 |
| 0.00001 | 0.99999 | 0.87267 | 50 | 67 | 67 |
| 0.66667 | 0.33333 | 0.06766 | 50 | 68 | 68 |
| 0.33335 | 0.66665 | 0.92969 | 50 | 69 | 69 |
| 0.33333 | 0.66667 | 0.26371 | 50 | 70 | 70 |
| 0.46514 | 0.53486 | 0.09582 | 50 | 71 | 71 |
| 0.46514 | 0.93025 | 0.09582 | 50 | 72 | 72 |
| 0.06975 | 0.53487 | 0.09582 | 50 | 73 | 73 |
| 0.93045 | 0.46520 | 0.90088 | 50 | 74 | 74 |
| 0.53480 | 0.06955 | 0.90088 | 50 | 75 | 75 |
| 0.53480 | 0.46520 | 0.90088 | 50 | 76 | 76 |
| 0.13187 | 0.86813 | 0.29252 | 50 | 77 | 77 |
| 0.13187 | 0.26376 | 0.29252 | 50 | 78 | 78 |
| 0.73625 | 0.86813 | 0.29252 | 50 | 79 | 79 |
| 0.59693 | 0.79846 | 0.09758 | 50 | 80 | 80 |
| 0.20154 | 0.40307 | 0.09758 | 50 | 81 | 81 |
| 0.20154 | 0.79846 | 0.09758 | 50 | 82 | 82 |
| 0.79876 | 0.20123 | 0.89937 | 50 | 83 | 83 |
| 0.79876 | 0.59748 | 0.89937 | 50 | 84 | 84 |
| 0.40252 | 0.20123 | 0.89937 | 50 | 85 | 85 |
| 0.00414 | 0.38078 | 0.37293 | 50 | 86 | 86 |
| 0.61923 | 0.62337 | 0.37292 | 50 | 87 | 87 |
| 0.37660 | 0.99587 | 0.37292 | 50 | 88 | 88 |
| 0.37663 | 0.38077 | 0.37292 | 50 | 89 | 89 |
| 0.00414 | 0.62340 | 0.37293 | 50 | 90 | 90 |
| 0.61923 | 0.99587 | 0.37293 | 50 | 91 | 91 |
| 0.41341 | 0.20671 | 0.33973 | 50 | 92 | 92 |
| 0.79330 | 0.58660 | 0.33973 | 50 | 93 | 93 |
| 0.79329 | 0.20671 | 0.33973 | 50 | 94 | 94 |
| 0.33333 | 0.66667 | 0.31756 | 50 | 95 | 95 |
| 0.20789 | 0.79212 | 0.33769 | 50 | 96 | 96 |
| 0.20789 | 0.41579 | 0.33769 | 50 | 97 | 97 |
| 0.58421 | 0.79212 | 0.33769 | 50 | 98 | 98 |
| 0.66667 | 0.33334 | 0.32073 | 50 | 99 | 99 |
| 0.26417 | 0.13209 | 0.29404 | 50 | 100 | 100 |
| 0.86791 | 0.73584 | 0.29404 | 50 | 101 | 101 |
| 0.86791 | 0.13209 | 0.29405 | 50 | 102 | 102 |
| 0.16674 | 0.33343 | 0.87209 | 50 | 103 | 103 |
| 0.66656 | 0.83325 | 0.87209 | 50 | 104 | 104 |
| 0.16673 | 0.83327 | 0.87209 | 50 | 105 | 105 |
Table 1 (PDF p. 42).
0.49994 0.50006 0.32131 50 106 106 0.00013 0.50007 0.32132 50 107 107 0.49993 0.99988 0.32132 50 108 108
Sn.equi-II-10
Å = 9.978 ML, meV/at.
12.51618 0.00000 0.00000 -6.25809 10.83933 0.00000 0.00000 0.00000 62.18220 142 atoms 0.33865 0.05400 0.14502 50 1 1 0.94600 0.28466 0.14502 50 2 2 0.71534 0.66135 0.14502 50 3 3 0.28466 0.94600 0.85498 50 4 4 0.66135 0.71534 0.85498 50 5 5 0.05400 0.33865 0.85498 50 6 6 0.66135 0.94600 0.85498 50 7 7 0.05400 0.71534 0.85498 50 8 8 0.28466 0.33865 0.85498 50 9 9 0.71534 0.05400 0.14502 50 10 10 0.33865 0.28466 0.14502 50 11 11 0.94600 0.66135 0.14502 50 12 12 0.00492 0.38702 0.81203 50 13 13 0.61298 0.61791 0.81203 50 14 14 0.38209 0.99508 0.81203 50 15 15 0.95141 0.27916 0.02146 50 16 16 0.32776 0.04859 0.02146 50 17 17 0.72084 0.67224 0.02146 50 18 18 0.32776 0.27916 0.02146 50 19 19 0.72084 0.04859 0.02146 50 20 20 0.95141 0.67224 0.02146 50 21 21 0.38209 0.38702 0.81203 50 22 22 0.00492 0.61791 0.81203 50 23 23 0.61298 0.99508 0.81203 50 24 24 0.67224 0.72084 0.97854 50 25 25 0.27916 0.95141 0.97854 50 26 26 0.04859 0.32776 0.97854 50 27 27 0.61791 0.61298 0.18797 50 28 28 0.99508 0.38209 0.18797 50 29 29 0.38702 0.00492 0.18797 50 30 30 0.99508 0.61298 0.18797 50 31 31 0.38702 0.38209 0.18797 50 32 32 0.61791 0.00492 0.18797 50 33 33 0.04859 0.72084 0.97854 50 34 34 0.67224 0.95141 0.97854 50 35 35
| 0.27916 | 0.32776 | 0.97854 | 50 | 36 | 36 |
| 0.54119 | 0.45881 | 0.04431 | 50 | 37 | 37 |
| 0.54119 | 0.08239 | 0.04431 | 50 | 38 | 38 |
| 0.91761 | 0.45881 | 0.04431 | 50 | 39 | 39 |
| 0.08239 | 0.54119 | 0.95569 | 50 | 40 | 40 |
| 0.45881 | 0.91761 | 0.95569 | 50 | 41 | 41 |
| 0.45881 | 0.54119 | 0.95569 | 50 | 42 | 42 |
| 0.20780 | 0.79220 | 0.21105 | 50 | 43 | 43 |
| 0.20780 | 0.41560 | 0.21105 | 50 | 44 | 44 |
| 0.58440 | 0.79220 | 0.21105 | 50 | 45 | 45 |
| 0.74926 | 0.87463 | 0.12216 | 50 | 46 | 46 |
| 0.12537 | 0.25074 | 0.12216 | 50 | 47 | 47 |
| 0.12537 | 0.87463 | 0.12216 | 50 | 48 | 48 |
| 0.87463 | 0.12537 | 0.87784 | 50 | 49 | 49 |
| 0.87463 | 0.74926 | 0.87784 | 50 | 50 | 50 |
| 0.25074 | 0.12537 | 0.87784 | 50 | 51 | 51 |
| 0.41560 | 0.20780 | 0.78895 | 50 | 52 | 52 |
| 0.79220 | 0.58440 | 0.78895 | 50 | 53 | 53 |
| 0.79220 | 0.20780 | 0.78895 | 50 | 54 | 54 |
| 0.00000 | 0.00000 | 0.06239 | 50 | 55 | 55 |
| 0.00000 | 0.00000 | 0.93761 | 50 | 56 | 56 |
| 0.66667 | 0.33333 | 0.22778 | 50 | 57 | 57 |
| 0.66667 | 0.33333 | 0.10411 | 50 | 58 | 58 |
| 0.33333 | 0.66667 | 0.89589 | 50 | 59 | 59 |
| 0.33333 | 0.66667 | 0.77222 | 50 | 60 | 60 |
| 0.54366 | 0.45634 | 0.11954 | 50 | 61 | 61 |
| 0.54366 | 0.08731 | 0.11954 | 50 | 62 | 62 |
| 0.91268 | 0.45634 | 0.11954 | 50 | 63 | 63 |
| 0.08731 | 0.54366 | 0.88045 | 50 | 64 | 64 |
| 0.45634 | 0.91268 | 0.88045 | 50 | 65 | 65 |
| 0.45634 | 0.54366 | 0.88045 | 50 | 66 | 66 |
| 0.20976 | 0.79024 | 0.78666 | 50 | 67 | 67 |
| 0.20976 | 0.41951 | 0.78666 | 50 | 68 | 68 |
| 0.58049 | 0.79024 | 0.78666 | 50 | 69 | 69 |
| 0.75402 | 0.87701 | 0.04699 | 50 | 70 | 70 |
| 0.12299 | 0.24598 | 0.04699 | 50 | 71 | 71 |
| 0.12299 | 0.87701 | 0.04699 | 50 | 72 | 72 |
| 0.87701 | 0.12299 | 0.95301 | 50 | 73 | 73 |
| 0.87701 | 0.75402 | 0.95301 | 50 | 74 | 74 |
| 0.24598 | 0.12299 | 0.95301 | 50 | 75 | 75 |
| 0.41951 | 0.20976 | 0.21334 | 50 | 76 | 76 |
| 0.79024 | 0.58049 | 0.21334 | 50 | 77 | 77 |
| 0.79024 | 0.20976 | 0.21334 | 50 | 78 | 78 |
| 0.00000 | 0.00000 | 0.10800 | 50 | 79 | 79 |
| 0.00000 | 0.00000 | 0.89200 | 50 | 80 | 80 |
| 0.66667 | 0.33333 | 0.77518 | 50 | 81 | 81 |
| 0.66667 | 0.33333 | 0.05849 | 50 | 82 | 82 |
| 0.33333 | 0.66667 | 0.94151 | 50 | 83 | 83 |
| 0.33333 | 0.66667 | 0.22482 | 50 | 84 | 84 |
| 0.46511 | 0.53489 | 0.08246 | 50 | 85 | 85 |
| 0.46511 | 0.93022 | 0.08246 | 50 | 86 | 86 |
| 0.06978 | 0.53489 | 0.08246 | 50 | 87 | 87 |
| 0.93022 | 0.46511 | 0.91754 | 50 | 88 | 88 |
| 0.53489 | 0.06978 | 0.91754 | 50 | 89 | 89 |
| 0.53489 | 0.46511 | 0.91754 | 50 | 90 | 90 |
| 0.13189 | 0.86811 | 0.24930 | 50 | 91 | 91 |
| 0.13189 | 0.26378 | 0.24930 | 50 | 92 | 92 |
| 0.73622 | 0.86811 | 0.24930 | 50 | 93 | 93 |
| 0.59695 | 0.79847 | 0.08405 | 50 | 94 | 94 |
| 0.20153 | 0.40305 | 0.08405 | 50 | 95 | 95 |
| 0.20153 | 0.79847 | 0.08405 | 50 | 96 | 96 |
| 0.79847 | 0.20153 | 0.91595 | 50 | 97 | 97 |
| 0.79847 | 0.59695 | 0.91595 | 50 | 98 | 98 |
| 0.40305 | 0.20153 | 0.91595 | 50 | 99 | 99 |
| 0.26378 | 0.13189 | 0.75070 | 50 | 100 | 100 |
| 0.86811 | 0.73622 | 0.75070 | 50 | 101 | 101 |
| 0.86811 | 0.13189 | 0.75070 | 50 | 102 | 102 |
| 0.00411 | 0.38075 | 0.31748 | 50 | 103 | 103 |
| 0.61925 | 0.62335 | 0.31748 | 50 | 104 | 104 |
| 0.37665 | 0.99589 | 0.31748 | 50 | 105 | 105 |
| 0.37665 | 0.38075 | 0.31748 | 50 | 106 | 106 |
| 0.00411 | 0.62335 | 0.31748 | 50 | 107 | 107 |
| 0.61925 | 0.99589 | 0.31748 | 50 | 108 | 108 |
| 0.41340 | 0.20670 | 0.28932 | 50 | 109 | 109 |
| 0.79330 | 0.58660 | 0.28932 | 50 | 110 | 110 |
| 0.79330 | 0.20670 | 0.28932 | 50 | 111 | 111 |
| 0.33333 | 0.66667 | 0.27051 | 50 | 112 | 112 |
| 0.20793 | 0.79207 | 0.28760 | 50 | 113 | 113 |
| 0.20793 | 0.41586 | 0.28760 | 50 | 114 | 114 |
| 0.58414 | 0.79207 | 0.28760 | 50 | 115 | 115 |
| 0.66667 | 0.33333 | 0.27322 | 50 | 116 | 116 |
| 0.26395 | 0.13198 | 0.25060 | 50 | 117 | 117 |
| 0.86802 | 0.73604 | 0.25060 | 50 | 118 | 118 |
| 0.86802 | 0.13198 | 0.25060 | 50 | 119 | 119 |
| 0.62335 | 0.61925 | 0.68252 | 50 | 120 | 120 |
| 0.99589 | 0.37665 | 0.68252 | 50 | 121 | 121 |
| 0.38075 | 0.00411 | 0.68252 | 50 | 122 | 122 |
| 0.99589 | 0.61925 | 0.68252 | 50 | 123 | 123 |
| 0.38075 | 0.37665 | 0.68252 | 50 | 124 | 124 |
| 0.62335 | 0.00411 | 0.68252 | 50 | 125 | 125 |
| 0.20670 | 0.79330 | 0.71068 | 50 | 126 | 126 |
| 0.20670 | 0.41340 | 0.71068 | 50 | 127 | 127 |
| 0.58660 | 0.79330 | 0.71068 | 50 | 128 | 128 |
| 0.66667 | 0.33333 | 0.72949 | 50 | 129 | 129 |
| 0.41586 | 0.20793 | 0.71240 | 50 | 130 | 130 |
| 0.79207 | 0.58414 | 0.71240 | 50 | 131 | 131 |
| 0.79207 | 0.20793 | 0.71240 | 50 | 132 | 132 |
| 0.33333 | 0.66667 | 0.72678 | 50 | 133 | 133 |
| 0.13198 | 0.86802 | 0.74940 | 50 | 134 | 134 |
| 0.13198 | 0.26395 | 0.74940 | 50 | 135 | 135 |
| 0.73604 | 0.86802 | 0.74940 | 50 | 136 | 136 |
| 0.50005 | 0.49995 | 0.72624 | 50 | 137 | 137 |
| 0.99990 | 0.49995 | 0.72624 | 50 | 138 | 138 |
| 0.50005 | 0.00010 | 0.72624 | 50 | 139 | 139 |
| 0.49995 | 0.50005 | 0.27376 | 50 | 140 | 140 |
| 0.00010 | 0.50005 | 0.27376 | 50 | 141 | 141 |
| 0.49995 | 0.99990 | 0.27376 | 50 | 142 | 142 |
Table 4.
Germanium-Slab xyz Files
Ge.db-monolayer (oP10)
Å ML, meV/at.
7.84310 0.00000 0.00000
0.00000 38.86961 0.00000
0.00000 0.00000 6.76570
10 atoms
0.02034 0.00000 0.81941 32 1 1
0.47966 0.00000 0.81941 32 2 2
0.52034 0.00000 0.18059 32 3 3
0.97966 0.00000 0.18059 32 4 4
0.25000 0.03815 0.67495 32 5 5
0.25000 0.96185 0.67495 32 6 6
0.75000 0.96185 0.32505 32 7 7
0.75000 0.03815 0.32505 32 8 8
0.25000 0.00000 0.37240 32 9 9
0.75000 0.00000 0.62760 32 10 10
Ge.iso-II-2.5
Å ML, meV/at.
15.67423 0.00000 0.00000
0.00000 11.19385 0.00000
0.00000 0.00000 28.11850
62 atoms
0.00001 0.00000 0.00000 32 1 1
0.36467 0.00000 0.10991 32 2 2
0.36467 0.00000 0.89009 32 3 3
0.50130 0.00000 0.15808 32 4 4
0.50130 0.00000 0.84192 32 5 5
0.76010 0.00000 0.04475 32 6 6
0.76010 0.00000 0.95525 32 7 7
0.91225 0.00000 0.07406 32 8 8
0.91225 0.00000 0.92595 32 9 9
0.49329 0.00000 0.05356 32 10 10
0.49329 0.00000 0.94644 32 11 11
0.24297 0.11297 0.00000 32 12 12
0.24297 0.88703 0.00000 32 13 13
0.55267 0.16644 0.10305 32 14 14
0.55267 0.83356 0.89694 32 15 15
0.55267 0.16644 0.89694 32 16 16
0.55267 0.83356 0.10305 32 17 17
0.30975 0.18824 0.07465 32 18 18
0.30975 0.81176 0.92535 32 19 19
0.30975 0.18824 0.92535 32 20 20
0.30975 0.81176 0.07465 32 21 21
0.95601 0.17575 0.12814 32 22 22
0.95601 0.82425 0.87186 32 23 23
0.95601 0.17575 0.87186 32 24 24
0.95601 0.82425 0.12814 32 25 25
0.08999 0.18182 0.00000 32 26 26
0.08999 0.81818 0.00000 32 27 27
0.69977 0.19543 0.07184 32 28 28
0.69977 0.80456 0.92816 32 29 29
0.69977 0.19543 0.92816 32 30 30
0.69977 0.80456 0.07184 32 31 31
0.05137 0.29872 0.07307 32 32 32
0.05137 0.70128 0.92693 32 33 33
0.05137 0.29872 0.92693 32 34 34
0.05137 0.70128 0.07307 32 35 35
0.66295 0.31657 0.00000 32 36 36
0.66295 0.68343 0.00000 32 37 37
0.83205 0.29264 0.10315 32 38 38
0.83205 0.70736 0.89685 32 39 39
0.83205 0.29264 0.89685 32 40 40
0.83205 0.70736 0.10315 32 41 41
0.44360 0.31369 0.07471 32 42 42
0.44360 0.68631 0.92529 32 43 43
0.44360 0.31369 0.92529 32 44 44
0.44360 0.68631 0.07471 32 45 45
0.19963 0.33467 0.10130 32 46 46
0.19963 0.66533 0.89870 32 47 47
0.19963 0.33467 0.89870 32 48 48
0.19963 0.66533 0.10130 32 49 49
0.51078 0.38706 0.00000 32 50 50
0.51078 0.61294 0.00000 32 51 51
0.25094 0.50000 0.15702 32 52 52
0.25094 0.50000 0.84298 32 53 53
0.26308 0.50000 0.05291 32 54 54
0.26308 0.50000 0.94709 32 55 55
0.38975 0.50000 0.11150 32 56 56
0.38975 0.50000 0.88850 32 57 57
0.75200 0.50000 0.00000 32 58 58
0.84553 0.50000 0.07091 32 59 59
0.84553 0.50000 0.92909 32 60 60
0.99777 0.50000 0.04467 32 61 61
0.99777 0.50000 0.95533 32 62 62
Ge.equi-II-3
Å = 2.911 ML, meV/at.
10.88372 -0.00000 0.00204
-5.44186 9.33195 -0.00089
0.00667 0.00048 34.96546
41 atoms
0.33470 0.04609 0.25061 50 1 1
0.95527 0.28723 0.25061 50 2 2
0.72578 0.66666 0.24872 50 3 3
0.71201 0.04620 0.25327 50 4 4
0.33247 0.28712 0.25327 50 5 5
0.96033 0.66666 0.25513 50 6 6
0.92142 0.25204 0.07214 50 7 7
0.33606 0.08131 0.07214 50 8 8
0.74943 0.66668 0.07242 50 9 9
0.33610 0.29972 0.04765 50 10 10
0.70306 0.03364 0.04765 50 11 11
0.96650 0.66668 0.04764 50 12 12
0.53293 0.44755 0.09586 50 13 13
0.55305 0.08189 0.09515 50 14 14
0.91793 0.46807 0.09555 50 15 15
0.75604 0.87970 0.21275 50 16 16
0.12609 0.24659 0.21253 50 17 17
0.12317 0.87502 0.21254 50 18 18
0.00216 0.00060 0.11854 50 19 19
0.66819 0.33376 0.18882 50 20 20
0.54300 0.45362 0.21275 50 21 21
0.54616 0.08674 0.21253 50 22 22
0.91481 0.45831 0.21254 50 23 23
0.75205 0.88580 0.09586 50 24 24
0.13783 0.25146 0.09515 50 25 25
0.11654 0.86528 0.09555 50 26 26
0.00110 0.99957 0.18882 50 27 27
0.66823 0.33274 0.11854 50 28 28
0.46653 0.53371 0.15486 50 29 29
0.46666 0.92995 0.15442 50 30 30
0.06985 0.53440 0.15449 50 31 31
0.59949 0.79963 0.15486 50 32 32
0.20338 0.40338 0.15442 50 33 33
0.20212 0.79894 0.15449 50 34 34
0.12584 0.49295 0.29437 50 35 35
0.05444 0.66665 0.32424 50 36 36
0.32321 0.44254 0.30830 50 37 37
0.29955 0.84037 0.29437 50 38 38
0.55285 0.66666 0.29650 50 39 39
0.54732 0.89077 0.30830 50 40 40
0.36303 0.66666 0.24997 50 41 41
Ge.equi-II-3.5
ML, meV/at.
10.71370 -0.01100 -0.00829
-5.49272 9.36400 -0.25389
-0.21007 -0.40637 30.60224
48 atoms
0.03938 0.81651 0.19581 32 1 1
0.04665 0.82625 0.27601 32 2 2
0.11219 0.35595 0.23590 32 3 3
0.13361 0.25074 0.05846 32 4 4
0.21634 0.29959 0.39743 32 5 5
0.18713 0.50189 0.07438 32 6 6
0.16572 0.49868 0.41335 32 7 7
0.15609 0.05849 0.16867 32 8 8
0.17348 0.07731 0.30260 32 9 9
0.16140 0.68985 0.16920 32 10 10
0.16828 0.70342 0.30314 32 11 11
0.24190 0.22156 0.23555 32 12 12
0.24199 0.62007 0.23625 32 13 13
0.36033 0.24629 0.07152 32 14 14
0.39287 0.23103 0.43153 32 15 15
0.35751 0.74388 0.04028 32 16 16
0.39007 0.72863 0.40028 32 17 17
0.36533 0.08255 0.12695 32 18 18
0.38570 0.12853 0.35199 32 19 19
0.36468 0.84638 0.11982 32 20 20
0.38505 0.89237 0.34486 32 21 21
0.50849 0.75334 0.23626 32 22 22
0.50840 0.35482 0.23555 32 23 23
0.98625 0.47286 0.12520 32 24 24
0.00594 0.49970 0.34986 32 25 25
0.98530 0.09568 0.12195 32 26 26
0.00628 0.12315 0.34661 32 27 27
0.95036 0.26790 0.16891 32 28 28
0.96249 0.28829 0.30290 32 29 29
0.78790 0.68665 0.16891 32 30 30
0.80003 0.70702 0.30290 32 31 31
0.74445 0.47524 0.12195 32 32 32
0.76413 0.50205 0.34661 32 33 33
0.74412 0.85179 0.12521 32 34 34
0.76510 0.87925 0.34986 32 35 35
0.70374 0.14867 0.19581 32 36 36
0.71101 0.15841 0.27601 32 37 37
0.63820 0.61894 0.23591 32 38 38
0.58467 0.47626 0.05846 32 39 39
0.56325 0.47301 0.39743 32 40 40
0.53406 0.67535 0.07439 32 41 41
0.61677 0.72416 0.41335 32 42 42
0.58211 0.27149 0.16866 32 43 43
0.58897 0.28505 0.30261 32 44 44
0.57690 0.89760 0.16922 32 45 45
0.59430 0.91642 0.30314 32 46 46
0.36517 0.44353 0.12499 32 47 47
0.38523 0.53138 0.34682 32 48 48
Ge.iso-II-4
,
-15.82209 15.82209 0.00000
-0.00007 -0.00007 15.71212
47.38157 47.38157 -0.00043
192 atoms
0.00000 0.88780 0.12974 32 1 1
0.00000 0.50254 0.93508 32 2 2
0.94334 0.00665 0.08217 32 3 3
0.94333 0.24350 0.00107 32 4 4
0.89604 0.92204 0.95858 32 5 5
0.90596 0.94148 0.05038 32 6 6
0.90724 0.94027 0.11385 32 7 7
0.90850 0.09119 0.00154 32 8 8
0.90851 0.15890 0.08174 32 9 9
0.90729 0.30984 0.96935 32 10 10
0.90595 0.30842 0.03291 32 11 11
0.89610 0.32794 0.12476 32 12 12
0.89967 0.70122 0.97045 32 13 13
0.90120 0.69291 0.03171 32 14 14
0.91681 0.69646 0.12495 32 15 15
0.91682 0.55370 0.95830 32 16 16
0.90118 0.55689 0.05163 32 17 17
0.89971 0.54879 0.11290 32 18 18
0.84765 0.05524 0.97125 32 19 19
0.84821 0.05655 0.03191 32 20 20
0.83387 0.04919 0.12574 32 21 21
0.83387 0.20091 0.95740 32 22 22
0.84819 0.19337 0.05138 32 23 23
0.84772 0.19496 0.11203 32 24 24
0.83869 0.79897 0.94772 32 25 25
0.84356 0.80720 0.05037 32 26 26
0.84406 0.80743 0.11390 32 27 27
0.84113 0.66051 0.00105 32 28 28
0.84112 0.58926 0.08229 32 29 29
0.84409 0.44269 0.96935 32 30 30
0.84354 0.44266 0.03297 32 31 31
0.83878 0.45095 0.13564 32 32 32
0.80668 0.74184 0.08225 32 33 33
0.80669 0.50793 0.00105 32 34 34
0.75000 0.99383 0.98263 32 35 35
| 0.75000 | 0.99488 | 0.02032 | 32 | 36 | 36 |
| 0.75000 | 0.99855 | 0.14880 | 32 | 37 | 37 |
| 0.74999 | 0.84154 | 0.97019 | 32 | 38 | 38 |
| 0.75000 | 0.84207 | 0.03112 | 32 | 39 | 39 |
| 0.75000 | 0.86023 | 0.12929 | 32 | 40 | 40 |
| 0.75000 | 0.75066 | 0.00081 | 32 | 41 | 41 |
| 0.75000 | 0.49909 | 0.08258 | 32 | 42 | 42 |
| 0.75000 | 0.25199 | 0.93431 | 32 | 43 | 43 |
| 0.75000 | 0.25501 | 0.06302 | 32 | 44 | 44 |
| 0.75000 | 0.25613 | 0.10069 | 32 | 45 | 45 |
| 0.75000 | 0.39037 | 0.95384 | 32 | 46 | 46 |
| 0.75000 | 0.40784 | 0.05223 | 32 | 47 | 47 |
| 0.75000 | 0.40835 | 0.11322 | 32 | 48 | 48 |
| 0.69332 | 0.74184 | 0.08225 | 32 | 49 | 49 |
| 0.69331 | 0.50793 | 0.00106 | 32 | 50 | 50 |
| 0.66129 | 0.79900 | 0.94773 | 32 | 51 | 51 |
| 0.65644 | 0.80720 | 0.05037 | 32 | 52 | 52 |
| 0.65594 | 0.80743 | 0.11390 | 32 | 53 | 53 |
| 0.65888 | 0.66051 | 0.00106 | 32 | 54 | 54 |
| 0.65889 | 0.58926 | 0.08229 | 32 | 55 | 55 |
| 0.65592 | 0.44270 | 0.96935 | 32 | 56 | 56 |
| 0.65647 | 0.44266 | 0.03297 | 32 | 57 | 57 |
| 0.66123 | 0.45096 | 0.13564 | 32 | 58 | 58 |
| 0.65235 | 0.05525 | 0.97125 | 32 | 59 | 59 |
| 0.65179 | 0.05655 | 0.03191 | 32 | 60 | 60 |
| 0.66613 | 0.04919 | 0.12574 | 32 | 61 | 61 |
| 0.66614 | 0.20092 | 0.95740 | 32 | 62 | 62 |
| 0.65181 | 0.19337 | 0.05138 | 32 | 63 | 63 |
| 0.65228 | 0.19496 | 0.11203 | 32 | 64 | 64 |
| 0.60032 | 0.70122 | 0.97045 | 32 | 65 | 65 |
| 0.59880 | 0.69291 | 0.03172 | 32 | 66 | 66 |
| 0.58319 | 0.69646 | 0.12495 | 32 | 67 | 67 |
| 0.58319 | 0.55371 | 0.95829 | 32 | 68 | 68 |
| 0.59883 | 0.55689 | 0.05163 | 32 | 69 | 69 |
| 0.60030 | 0.54879 | 0.11290 | 32 | 70 | 70 |
| 0.60393 | 0.92205 | 0.95860 | 32 | 71 | 71 |
| 0.59404 | 0.94148 | 0.05038 | 32 | 72 | 72 |
| 0.59276 | 0.94027 | 0.11385 | 32 | 73 | 73 |
| 0.59150 | 0.09119 | 0.00154 | 32 | 74 | 74 |
| 0.59149 | 0.15890 | 0.08174 | 32 | 75 | 75 |
| 0.59271 | 0.30985 | 0.96935 | 32 | 76 | 76 |
| 0.59405 | 0.30842 | 0.03291 | 32 | 77 | 77 |
| 0.60390 | 0.32794 | 0.12476 | 32 | 78 | 78 |
| 0.55666 | 0.00665 | 0.08217 | 32 | 79 | 79 |
| 0.55667 | 0.24350 | 0.00107 | 32 | 80 | 80 |
| 0.49998 | 0.90791 | 0.97172 | 32 | 81 | 81 |
| 0.50000 | 0.90693 | 0.03132 | 32 | 82 | 82 |
| 0.50000 | 0.88780 | 0.12974 | 32 | 83 | 83 |
| 0.50000 | 0.75359 | 0.02030 | 32 | 84 | 84 |
| 0.50000 | 0.00101 | 0.00159 | 32 | 85 | 85 |
Table 5.
0.50000 0.24902 0.08172 32 86 86
0.50001 0.36206 0.95334 32 87 87
0.50000 0.34292 0.05197 32 88 88
0.50000 0.49621 0.06306 32 89 89
0.50000 0.49435 0.10075 32 90 90
0.99998 0.90791 0.97172 32 91 91
0.00000 0.90693 0.03132 32 92 92
0.99999 0.75551 0.98260 32 93 93
1.00000 0.75359 0.02030 32 94 94
1.00000 0.74775 0.14810 32 95 95
1.00000 0.00101 0.00159 32 96 96
0.00000 0.24902 0.08172 32 97 97
0.00000 0.36206 0.95334 32 98 98
0.00000 0.34292 0.05197 32 99 99
0.00000 0.34197 0.11162 32 100 100
0.00000 0.49621 0.06306 32 101 101
0.00000 0.49435 0.10075 32 102 102
0.05666 0.00665 0.08217 32 103 103
0.05667 0.24350 0.00107 32 104 104
0.10393 0.92205 0.95860 32 105 105
0.09404 0.94148 0.05038 32 106 106
0.09276 0.94027 0.11385 32 107 107
0.09150 0.09119 0.00154 32 108 108
0.09150 0.15890 0.08174 32 109 109
0.09272 0.30985 0.96935 32 110 110
0.09406 0.30842 0.03291 32 111 111
0.10390 0.32794 0.12476 32 112 112
0.10032 0.70122 0.97045 32 113 113
0.09880 0.69291 0.03172 32 114 114
0.08319 0.69646 0.12495 32 115 115
0.08319 0.55371 0.95829 32 116 116
0.09883 0.55689 0.05163 32 117 117
0.10030 0.54879 0.11290 32 118 118
0.15235 0.05525 0.97125 32 119 119
0.15179 0.05655 0.03191 32 120 120
0.16613 0.04919 0.12574 32 121 121
0.16614 0.20092 0.95740 32 122 122
0.15181 0.19337 0.05138 32 123 123
0.15228 0.19496 0.11203 32 124 124
0.16129 0.79900 0.94773 32 125 125
0.15644 0.80720 0.05037 32 126 126
0.15594 0.80743 0.11390 32 127 127
0.15888 0.66051 0.00106 32 128 128
0.15888 0.58926 0.08229 32 129 129
0.15592 0.44270 0.96935 32 130 130
0.15647 0.44266 0.03297 32 131 131
0.16123 0.45096 0.13564 32 132 132
0.19332 0.74184 0.08225 32 133 133
0.19331 0.50793 0.00106 32 134 134
0.25000 0.99383 0.98263 32 135 135
| 0.25000 | 0.99488 | 0.02032 | 32 | 136 | 136 |
| 0.25000 | 0.99855 | 0.14880 | 32 | 137 | 137 |
| 0.24999 | 0.84154 | 0.97019 | 32 | 138 | 138 |
| 0.25000 | 0.84207 | 0.03112 | 32 | 139 | 139 |
| 0.25000 | 0.86023 | 0.12929 | 32 | 140 | 140 |
| 0.25000 | 0.75066 | 0.00081 | 32 | 141 | 141 |
| 0.25000 | 0.49909 | 0.08258 | 32 | 142 | 142 |
| 0.25000 | 0.25199 | 0.93431 | 32 | 143 | 143 |
| 0.25000 | 0.25501 | 0.06302 | 32 | 144 | 144 |
| 0.25000 | 0.25613 | 0.10069 | 32 | 145 | 145 |
| 0.25000 | 0.39037 | 0.95384 | 32 | 146 | 146 |
| 0.25000 | 0.40784 | 0.05223 | 32 | 147 | 147 |
| 0.25000 | 0.40835 | 0.11322 | 32 | 148 | 148 |
| 0.30668 | 0.74184 | 0.08225 | 32 | 149 | 149 |
| 0.30669 | 0.50793 | 0.00105 | 32 | 150 | 150 |
| 0.33869 | 0.79897 | 0.94772 | 32 | 151 | 151 |
| 0.34356 | 0.80720 | 0.05037 | 32 | 152 | 152 |
| 0.34406 | 0.80743 | 0.11390 | 32 | 153 | 153 |
| 0.34113 | 0.66051 | 0.00105 | 32 | 154 | 154 |
| 0.34112 | 0.58926 | 0.08229 | 32 | 155 | 155 |
| 0.34409 | 0.44269 | 0.96935 | 32 | 156 | 156 |
| 0.34354 | 0.44266 | 0.03297 | 32 | 157 | 157 |
| 0.33877 | 0.45095 | 0.13564 | 32 | 158 | 158 |
| 0.34765 | 0.05524 | 0.97125 | 32 | 159 | 159 |
| 0.34821 | 0.05655 | 0.03191 | 32 | 160 | 160 |
| 0.33387 | 0.04919 | 0.12574 | 32 | 161 | 161 |
| 0.33387 | 0.20091 | 0.95740 | 32 | 162 | 162 |
| 0.34819 | 0.19337 | 0.05138 | 32 | 163 | 163 |
| 0.34772 | 0.19496 | 0.11203 | 32 | 164 | 164 |
| 0.39967 | 0.70122 | 0.97045 | 32 | 165 | 165 |
| 0.40120 | 0.69291 | 0.03171 | 32 | 166 | 166 |
| 0.41681 | 0.69646 | 0.12495 | 32 | 167 | 167 |
| 0.41682 | 0.55370 | 0.95830 | 32 | 168 | 168 |
| 0.40118 | 0.55689 | 0.05163 | 32 | 169 | 169 |
| 0.39971 | 0.54879 | 0.11290 | 32 | 170 | 170 |
| 0.39604 | 0.92204 | 0.95858 | 32 | 171 | 171 |
| 0.40596 | 0.94148 | 0.05038 | 32 | 172 | 172 |
| 0.40724 | 0.94027 | 0.11385 | 32 | 173 | 173 |
| 0.40849 | 0.09119 | 0.00154 | 32 | 174 | 174 |
| 0.40851 | 0.15890 | 0.08174 | 32 | 175 | 175 |
| 0.40729 | 0.30984 | 0.96935 | 32 | 176 | 176 |
| 0.40595 | 0.30842 | 0.03291 | 32 | 177 | 177 |
| 0.39610 | 0.32794 | 0.12476 | 32 | 178 | 178 |
| 0.44334 | 0.00665 | 0.08217 | 32 | 179 | 179 |
| 0.44333 | 0.24350 | 0.00107 | 32 | 180 | 180 |
| 0.50000 | 0.75551 | 0.98260 | 32 | 181 | 181 |
| 0.50000 | 0.74775 | 0.14810 | 32 | 182 | 182 |
| 0.50000 | 0.34197 | 0.11162 | 32 | 183 | 183 |
| 0.50000 | 0.50254 | 0.93508 | 32 | 184 | 184 |
Table 6.
0.00001 0.48841 0.97807 32 185 185
0.75000 0.26178 0.97745 32 186 186
0.25000 0.26178 0.97745 32 187 187
0.50001 0.48841 0.97807 32 188 188
0.75000 0.98864 0.10562 32 189 189
1.00000 0.76126 0.10506 32 190 190
0.25000 0.98864 0.10562 32 191 191
0.50000 0.76126 0.10506 32 192 192
Ge.equi-II-6
Å = 5.800 ML, = 120 meV/at.
10.86109 -0.01836 -0.00140
-5.44644 9.39675 -0.00201
-0.00506 -0.01138 38.26388
82 atoms
0.34308 0.99782 0.20027 32 1 1
0.95338 0.22993 0.20030 32 2 2
0.72149 0.60798 0.20028 32 3 3
0.72123 0.99788 0.20033 32 4 4
0.34308 0.22938 0.20035 32 5 5
0.95299 0.60771 0.20028 32 6 6
0.96265 0.23156 0.02246 32 7 7
0.33972 0.98994 0.02231 32 8 8
0.71411 0.61309 0.02088 32 9 9
0.33792 0.23100 0.02467 32 10 10
0.71970 0.99048 0.02487 32 11 11
0.94899 0.61236 0.02657 32 12 12
0.62392 0.55966 0.26098 32 13 13
0.00197 0.32778 0.26100 32 14 14
0.39179 0.94936 0.26101 32 15 15
0.00168 0.55928 0.26101 32 16 16
0.39187 0.32751 0.26096 32 17 17
0.62336 0.94936 0.26094 32 18 18
0.55050 0.40345 0.05898 32 19 19
0.54819 0.03198 0.05903 32 20 20
0.91888 0.39903 0.05877 32 21 21
0.21366 0.73739 0.29415 32 22 22
0.21406 0.36150 0.29395 32 23 23
0.59000 0.73776 0.29395 32 24 24
0.75507 0.81993 0.16734 32 25 25
0.13133 0.19586 0.16734 32 26 26
0.13097 0.81953 0.16713 32 27 27
0.00616 0.94435 0.08239 32 28 28
0.67271 0.27901 0.31721 32 29 29
0.67247 0.27846 0.14409 32 30 30
0.54885 0.40170 0.16467 32 31 31
0.54892 0.03090 0.16469 32 32 32
| 0.92028 | 0.40228 | 0.16462 | 32 | 33 | 33 |
| 0.75975 | 0.82036 | 0.06012 | 32 | 34 | 34 |
| 0.12706 | 0.18979 | 0.06017 | 32 | 35 | 35 |
| 0.13048 | 0.82432 | 0.05992 | 32 | 36 | 36 |
| 0.42506 | 0.15537 | 0.29660 | 32 | 37 | 37 |
| 0.79642 | 0.52673 | 0.29667 | 32 | 38 | 38 |
| 0.79584 | 0.15530 | 0.29662 | 32 | 39 | 39 |
| 0.00578 | 0.94493 | 0.14701 | 32 | 40 | 40 |
| 0.67283 | 0.27877 | 0.08011 | 32 | 41 | 41 |
| 0.33916 | 0.61231 | 0.31428 | 32 | 42 | 42 |
| 0.47142 | 0.47972 | 0.11194 | 32 | 43 | 43 |
| 0.47075 | 0.87492 | 0.11187 | 32 | 44 | 44 |
| 0.07566 | 0.47956 | 0.11171 | 32 | 45 | 45 |
| 0.13824 | 0.81366 | 0.34849 | 32 | 46 | 46 |
| 0.13788 | 0.21000 | 0.34825 | 32 | 47 | 47 |
| 0.74200 | 0.81360 | 0.34828 | 32 | 48 | 48 |
| 0.60333 | 0.74352 | 0.11303 | 32 | 49 | 49 |
| 0.20693 | 0.34763 | 0.11302 | 32 | 50 | 50 |
| 0.20700 | 0.74388 | 0.11280 | 32 | 51 | 51 |
| 0.00788 | 0.32120 | 0.44041 | 32 | 52 | 52 |
| 0.62631 | 0.56969 | 0.43883 | 32 | 53 | 53 |
| 0.38469 | 0.94679 | 0.43897 | 32 | 54 | 54 |
| 0.38521 | 0.32675 | 0.43642 | 32 | 55 | 55 |
| 0.00710 | 0.55604 | 0.43472 | 32 | 56 | 56 |
| 0.62574 | 0.94497 | 0.43662 | 32 | 57 | 57 |
| 0.42658 | 0.15510 | 0.40225 | 32 | 58 | 58 |
| 0.79363 | 0.52576 | 0.40252 | 32 | 59 | 59 |
| 0.79807 | 0.15739 | 0.40231 | 32 | 60 | 60 |
| 0.33886 | 0.61299 | 0.37890 | 32 | 61 | 61 |
| 0.21890 | 0.73738 | 0.40136 | 32 | 62 | 62 |
| 0.21495 | 0.36666 | 0.40117 | 32 | 63 | 63 |
| 0.58439 | 0.73396 | 0.40112 | 32 | 64 | 64 |
| 0.67328 | 0.27961 | 0.38118 | 32 | 65 | 65 |
| 0.26929 | 0.07742 | 0.34942 | 32 | 66 | 66 |
| 0.87392 | 0.68234 | 0.34958 | 32 | 67 | 67 |
| 0.87409 | 0.07810 | 0.34935 | 32 | 68 | 68 |
| 0.12613 | 0.38780 | 0.97224 | 32 | 69 | 69 |
| 0.12048 | 0.61134 | 0.98264 | 32 | 70 | 70 |
| 0.37306 | 0.43569 | 0.98467 | 32 | 71 | 71 |
| 0.34993 | 0.83480 | 0.97218 | 32 | 72 | 72 |
| 0.61879 | 0.61212 | 0.95792 | 32 | 73 | 73 |
| 0.54857 | 0.78605 | 0.98497 | 32 | 74 | 74 |
| 0.78277 | 0.73339 | 0.48905 | 32 | 75 | 75 |
| 0.83059 | 0.98027 | 0.47662 | 32 | 76 | 76 |
| 0.00628 | 0.72773 | 0.47865 | 32 | 77 | 77 |
| 0.00715 | 0.22614 | 0.50337 | 32 | 78 | 78 |
| 0.22977 | 0.95724 | 0.48911 | 32 | 79 | 79 |
| 0.18093 | 0.15579 | 0.47631 | 32 | 80 | 80 |
| 0.31126 | 0.61126 | 0.02520 | 32 | 81 | 81 |
| 0.00596 | 0.91831 | 0.43609 | 32 | 82 | 82 |
Table 7.
Silicon-Slab xyz Files
Si.db-monolayer (oP10)
7.40937 0.00000 0.00000
0.00000 35.75410 0.00000
0.00000 0.00000 6.39543
10 atoms
0.01913 0.00000 0.81934 14 1 1
0.48087 0.00000 0.81934 14 2 2
0.51913 0.00000 0.18066 14 3 3
0.98087 0.00000 0.18066 14 4 4
0.25000 0.03788 0.67701 14 5 5
0.25000 0.96212 0.67701 14 6 6
0.75000 0.96212 0.32299 14 7 7
0.75000 0.03788 0.32299 14 8 8
0.25000 0.00000 0.37407 14 9 9
0.75000 0.00000 0.62593 14 10 10
Si.iso-II-2.5
15.01360 0.00000 0.00000
0.00000 10.72374 0.00000
0.00000 0.00000 24.81168
62 atoms
0.00530 0.00000 0.00000 14 1 1
0.36693 0.00000 0.11410 14 2 2
0.36693 0.00000 0.88590 14 3 3
0.50034 0.00000 0.16477 14 4 4
0.50034 0.00000 0.83523 14 5 5
0.76091 0.00000 0.04838 14 6 6
0.76091 0.00000 0.95162 14 7 7
0.91223 0.00000 0.07669 14 8 8
0.91223 0.00000 0.92331 14 9 9
0.49346 0.00000 0.05520 14 10 10
0.49346 0.00000 0.94480 14 11 11
0.24599 0.11233 0.00000 14 12 12
0.24599 0.88767 0.00000 14 13 13
0.55251 0.16366 0.10837 14 14 14
0.55251 0.83634 0.89163 14 15 15
0.55251 0.16366 0.89163 14 16 16
0.55251 0.83634 0.10837 14 17 17
0.31244 0.18904 0.07990 14 18 18
0.31244 0.81096 0.92010 14 19 19
0.31244 0.18904 0.92010 14 20 20
| 0.31244 | 0.81096 | 0.07990 | 14 | 21 | 21 |
| 0.94147 | 0.19531 | 0.11305 | 14 | 22 | 22 |
| 0.94147 | 0.80469 | 0.88695 | 14 | 23 | 23 |
| 0.94147 | 0.19531 | 0.88695 | 14 | 24 | 24 |
| 0.94147 | 0.80469 | 0.11305 | 14 | 25 | 25 |
| 0.09512 | 0.18183 | 0.00000 | 14 | 26 | 26 |
| 0.09512 | 0.81817 | 0.00000 | 14 | 27 | 27 |
| 0.69757 | 0.19292 | 0.07633 | 14 | 28 | 28 |
| 0.69757 | 0.80708 | 0.92367 | 14 | 29 | 29 |
| 0.69757 | 0.19292 | 0.92367 | 14 | 30 | 30 |
| 0.69757 | 0.80708 | 0.07633 | 14 | 31 | 31 |
| 0.06053 | 0.30706 | 0.07633 | 14 | 32 | 32 |
| 0.06053 | 0.69294 | 0.92367 | 14 | 33 | 33 |
| 0.06053 | 0.30706 | 0.92367 | 14 | 34 | 34 |
| 0.06053 | 0.69294 | 0.07633 | 14 | 35 | 35 |
| 0.66301 | 0.31816 | 0.00000 | 14 | 36 | 36 |
| 0.66301 | 0.68185 | 0.00000 | 14 | 37 | 37 |
| 0.81674 | 0.30459 | 0.11295 | 14 | 38 | 38 |
| 0.81674 | 0.69541 | 0.88705 | 14 | 39 | 39 |
| 0.81674 | 0.30459 | 0.88705 | 14 | 40 | 40 |
| 0.81674 | 0.69541 | 0.11295 | 14 | 41 | 41 |
| 0.44568 | 0.31096 | 0.07990 | 14 | 42 | 42 |
| 0.44568 | 0.68904 | 0.92010 | 14 | 43 | 43 |
| 0.44568 | 0.31096 | 0.92010 | 14 | 44 | 44 |
| 0.44568 | 0.68904 | 0.07990 | 14 | 45 | 45 |
| 0.20560 | 0.33635 | 0.10836 | 14 | 46 | 46 |
| 0.20560 | 0.66365 | 0.89164 | 14 | 47 | 47 |
| 0.20560 | 0.33635 | 0.89164 | 14 | 48 | 48 |
| 0.20560 | 0.66365 | 0.10836 | 14 | 49 | 49 |
| 0.51214 | 0.38767 | 0.00000 | 14 | 50 | 50 |
| 0.51214 | 0.61233 | 0.00000 | 14 | 51 | 51 |
| 0.25778 | 0.50000 | 0.16477 | 14 | 52 | 52 |
| 0.25778 | 0.50000 | 0.83523 | 14 | 53 | 53 |
| 0.26467 | 0.50000 | 0.05519 | 14 | 54 | 54 |
| 0.26467 | 0.50000 | 0.94481 | 14 | 55 | 55 |
| 0.39120 | 0.50000 | 0.11411 | 14 | 56 | 56 |
| 0.39120 | 0.50000 | 0.88589 | 14 | 57 | 57 |
| 0.75282 | 0.50000 | 0.00000 | 14 | 58 | 58 |
| 0.84591 | 0.50000 | 0.07668 | 14 | 59 | 59 |
| 0.84591 | 0.50000 | 0.92332 | 14 | 60 | 60 |
| 0.99722 | 0.50000 | 0.04837 | 14 | 61 | 61 |
| 0.99722 | 0.50000 | 0.95163 | 14 | 62 | 62 |
Table 8.
Si.equi-II-3
Å = 3.253 ML, meV/at.
10.27433 -0.00034 0.00000
-5.13746 8.89766 -0.00000
0.00001 -0.00000 26.09222
46 atoms
0.33334 0.04309 0.27406 14 1 1
0.95693 0.29027 0.27407 14 2 2
0.70976 0.66667 0.27406 14 3 3
0.71884 0.05218 0.27250 14 4 4
0.33333 0.28116 0.27251 14 5 5
0.94782 0.66666 0.27251 14 6 6
0.95693 0.29027 0.02445 14 7 7
0.33334 0.04309 0.02445 14 8 8
0.70976 0.66667 0.02445 14 9 9
0.33333 0.28116 0.02601 14 10 10
0.71884 0.05218 0.02601 14 11 11
0.94782 0.66666 0.02601 14 12 12
0.54259 0.45614 0.07488 14 13 13
0.54385 0.08644 0.07488 14 14 14
0.91356 0.45741 0.07488 14 15 15
0.75311 0.87719 0.22364 14 16 16
0.12407 0.24689 0.22364 14 17 17
0.12280 0.87592 0.22363 14 18 18
0.00001 0.00000 0.10469 14 19 19
0.66667 0.33334 0.19382 14 20 20
0.54259 0.45614 0.22363 14 21 21
0.54386 0.08644 0.22364 14 22 22
0.91356 0.45741 0.22364 14 23 23
0.75311 0.87718 0.07488 14 24 24
0.12407 0.24689 0.07488 14 25 25
0.12281 0.87593 0.07488 14 26 26
0.00001 0.00000 0.19382 14 27 27
0.66667 0.33334 0.10469 14 28 28
0.46565 0.53450 0.14926 14 29 29
0.46550 0.93115 0.14926 14 30 30
0.06885 0.53434 0.14926 14 31 31
0.59782 0.79884 0.14926 14 32 32
0.20101 0.40218 0.14926 14 33 33
0.20117 0.79898 0.14926 14 34 34
0.10121 0.43454 0.34567 14 35 35
0.13149 0.66665 0.32727 14 36 36
0.33332 0.46483 0.32727 14 37 37
0.33333 0.89878 0.34565 14 38 38
0.56544 0.66667 0.34565 14 39 39
0.53517 0.86850 0.32727 14 40 40
0.10121 0.43454 0.95284 14 41 41
0.13150 0.66665 0.97125 14 42 42
0.33332 0.46483 0.97125 14 43 43
0.33333 0.89878 0.95286 14 44 44
0.56544 0.66667 0.95286 14 45 45
0.53517 0.86850 0.97125 14 46 46
Si.iso-II-4
10.62542 0.00000 0.00000
0.00000 14.91779 0.00000
0.00000 0.00000 34.35054
96 atoms
0.25000 0.51535 0.23141 14 1 1
0.75000 0.48465 0.23141 14 2 2
0.25000 0.11281 0.95396 14 3 3
0.75000 0.88719 0.95396 14 4 4
0.25000 0.12141 0.87777 14 5 5
0.75000 0.87859 0.87777 14 6 6
0.13684 0.63142 0.14602 14 7 7
0.86316 0.36858 0.14602 14 8 8
0.36316 0.63142 0.14602 14 9 9
0.63684 0.36858 0.14602 14 10 10
0.13684 0.86858 0.99724 14 11 11
0.86316 0.13142 0.99724 14 12 12
0.36316 0.86858 0.99724 14 13 13
0.63684 0.13142 0.99724 14 14 14
0.05522 0.56261 0.91432 14 15 15
0.94478 0.43739 0.91432 14 16 16
0.44478 0.56261 0.91432 14 17 17
0.55522 0.43739 0.91432 14 18 18
0.06192 0.56696 0.08724 14 19 19
0.93808 0.43304 0.08724 14 20 20
0.43808 0.56696 0.08724 14 21 21
0.56192 0.43304 0.08724 14 22 22
0.06162 0.56646 0.20451 14 23 23
0.93838 0.43354 0.20451 14 24 24
0.43838 0.56646 0.20451 14 25 25
0.56162 0.43354 0.20451 14 26 26
0.06764 0.71671 0.99726 14 27 27
0.93236 0.28329 0.99726 14 28 28
0.43236 0.71671 0.99726 14 29 29
0.56764 0.28329 0.99726 14 30 30
0.06763 0.78329 0.14600 14 31 31
0.93237 0.21671 0.14600 14 32 32
0.43237 0.78329 0.14600 14 33 33
0.56763 0.21671 0.14600 14 34 34
0.06161 0.93353 0.93876 14 35 35
0.93839 0.06647 0.93876 14 36 36
0.43839 0.93353 0.93876 14 37 37
0.56161 0.06647 0.93876 14 38 38
0.06191 0.93304 0.05602 14 39 39
0.93809 0.06696 0.05602 14 40 40
| 0.43809 | 0.93304 | 0.05602 | 14 | 41 | 41 |
| 0.56191 | 0.06696 | 0.05602 | 14 | 42 | 42 |
| 0.05523 | 0.93739 | 0.22893 | 14 | 43 | 43 |
| 0.94477 | 0.06261 | 0.22893 | 14 | 44 | 44 |
| 0.44477 | 0.93739 | 0.22893 | 14 | 45 | 45 |
| 0.55523 | 0.06261 | 0.22893 | 14 | 46 | 46 |
| 0.05633 | 0.31849 | 0.94166 | 14 | 47 | 47 |
| 0.94367 | 0.68151 | 0.94166 | 14 | 48 | 48 |
| 0.44367 | 0.31849 | 0.94166 | 14 | 49 | 49 |
| 0.55633 | 0.68151 | 0.94166 | 14 | 50 | 50 |
| 0.05362 | 0.31807 | 0.05335 | 14 | 51 | 51 |
| 0.94638 | 0.68193 | 0.05335 | 14 | 52 | 52 |
| 0.44638 | 0.31807 | 0.05335 | 14 | 53 | 53 |
| 0.55362 | 0.68193 | 0.05335 | 14 | 54 | 54 |
| 0.08304 | 0.32564 | 0.22620 | 14 | 55 | 55 |
| 0.91696 | 0.67436 | 0.22620 | 14 | 56 | 56 |
| 0.41696 | 0.32564 | 0.22620 | 14 | 57 | 57 |
| 0.58304 | 0.67436 | 0.22620 | 14 | 58 | 58 |
| 0.08305 | 0.17437 | 0.91707 | 14 | 59 | 59 |
| 0.91695 | 0.82563 | 0.91707 | 14 | 60 | 60 |
| 0.41695 | 0.17437 | 0.91707 | 14 | 61 | 61 |
| 0.58305 | 0.82563 | 0.91707 | 14 | 62 | 62 |
| 0.05362 | 0.18193 | 0.08991 | 14 | 63 | 63 |
| 0.94638 | 0.81807 | 0.08991 | 14 | 64 | 64 |
| 0.44638 | 0.18193 | 0.08991 | 14 | 65 | 65 |
| 0.55362 | 0.81807 | 0.08991 | 14 | 66 | 66 |
| 0.05633 | 0.18151 | 0.20160 | 14 | 67 | 67 |
| 0.94367 | 0.81849 | 0.20160 | 14 | 68 | 68 |
| 0.44367 | 0.18151 | 0.20160 | 14 | 69 | 69 |
| 0.55633 | 0.81849 | 0.20160 | 14 | 70 | 70 |
| 0.25000 | 0.38114 | 0.96221 | 14 | 71 | 71 |
| 0.75000 | 0.61886 | 0.96221 | 14 | 72 | 72 |
| 0.25000 | 0.37950 | 0.03194 | 14 | 73 | 73 |
| 0.75000 | 0.62050 | 0.03194 | 14 | 74 | 74 |
| 0.25000 | 0.38720 | 0.18930 | 14 | 75 | 75 |
| 0.75000 | 0.61280 | 0.18930 | 14 | 76 | 76 |
| 0.25000 | 0.37859 | 0.26550 | 14 | 77 | 77 |
| 0.75000 | 0.62141 | 0.26550 | 14 | 78 | 78 |
| 0.25000 | 0.53273 | 0.94144 | 14 | 79 | 79 |
| 0.75000 | 0.46727 | 0.94144 | 14 | 80 | 80 |
| 0.25000 | 0.53248 | 0.05212 | 14 | 81 | 81 |
| 0.75000 | 0.46752 | 0.05212 | 14 | 82 | 82 |
| 0.25000 | 0.62605 | 0.99685 | 14 | 83 | 83 |
| 0.75000 | 0.37395 | 0.99685 | 14 | 84 | 84 |
| 0.25000 | 0.87395 | 0.14640 | 14 | 85 | 85 |
| 0.75000 | 0.12605 | 0.14640 | 14 | 86 | 86 |
| 0.25000 | 0.12050 | 0.11132 | 14 | 87 | 87 |
| 0.75000 | 0.87950 | 0.11132 | 14 | 88 | 88 |
| 0.25000 | 0.11887 | 0.18105 | 14 | 89 | 89 |
Table 62.
0.75000 0.88113 0.18105 14 90 90
0.25000 0.98466 0.91187 14 91 91
0.75000 0.01534 0.91187 14 92 92
0.25000 0.96752 0.09113 14 93 93
0.75000 0.03248 0.09113 14 94 94
0.25000 0.96728 0.20182 14 95 95
0.75000 0.03272 0.20182 14 96 96
Si.iso-II-5
,
10.57224 0.00000 0.00000
0.00000 14.86573 0.00000
0.00000 0.00000 43.59367
130 atoms
0.25000 0.62159 0.21259 14 1 1
0.25000 0.62159 0.78741 14 2 2
0.75000 0.37841 0.78741 14 3 3
0.75000 0.37841 0.21259 14 4 4
0.25000 0.48433 0.18583 14 5 5
0.25000 0.48433 0.81417 14 6 6
0.75000 0.51567 0.81417 14 7 7
0.75000 0.51567 0.18583 14 8 8
0.25000 0.61260 0.15253 14 9 9
0.25000 0.61260 0.84747 14 10 10
0.75000 0.38740 0.84747 14 11 11
0.75000 0.38740 0.15253 14 12 12
0.25000 0.03275 0.83797 14 13 13
0.25000 0.03275 0.16203 14 14 14
0.75000 0.96725 0.16203 14 15 15
0.75000 0.96725 0.83797 14 16 16
0.63655 0.63102 0.11807 14 17 17
0.86345 0.63102 0.88193 14 18 18
0.13655 0.36898 0.88193 14 19 19
0.36345 0.36898 0.11807 14 20 20
0.36345 0.36898 0.88193 14 21 21
0.13655 0.36898 0.11807 14 22 22
0.86345 0.63102 0.11807 14 23 23
0.63655 0.63102 0.88193 14 24 24
0.63592 0.86935 0.00000 14 25 25
0.86408 0.86935 0.00000 14 26 26
0.13592 0.13065 0.00000 14 27 27
0.36408 0.13065 0.00000 14 28 28
0.58265 0.32544 0.18156 14 29 29
0.91735 0.32544 0.81844 14 30 30
0.08265 0.67456 0.81844 14 31 31
0.41735 0.67456 0.18156 14 32 32
0.41735 0.67456 0.81844 14 33 33 0.08265 0.67456 0.18156 14 34 34 0.91735 0.32544 0.18156 14 35 35 0.58265 0.32544 0.81844 14 36 36 0.56182 0.56654 0.16429 14 37 37 0.93818 0.56654 0.83571 14 38 38 0.06182 0.43346 0.83571 14 39 39 0.43818 0.43346 0.16429 14 40 40 0.43818 0.43346 0.83571 14 41 41 0.06182 0.43346 0.16429 14 42 42 0.93818 0.56654 0.16429 14 43 43 0.56182 0.56654 0.83571 14 44 44 0.55537 0.93719 0.18366 14 45 45 0.94463 0.93719 0.81634 14 46 46 0.05537 0.06281 0.81634 14 47 47 0.44462 0.06281 0.18366 14 48 48 0.44462 0.06281 0.81634 14 49 49 0.05537 0.06281 0.18366 14 50 50 0.94463 0.93719 0.18366 14 51 51 0.55537 0.93719 0.81634 14 52 52 0.56699 0.71656 0.00000 14 53 53 0.93301 0.71656 0.00000 14 54 54 0.06699 0.28344 0.00000 14 55 55 0.43301 0.28344 0.00000 14 56 56 0.56726 0.78317 0.11800 14 57 57 0.93274 0.78317 0.88200 14 58 58 0.06726 0.21683 0.88200 14 59 59 0.43274 0.21683 0.11800 14 60 60 0.43274 0.21683 0.88200 14 61 61 0.06726 0.21683 0.11800 14 62 62 0.93274 0.78317 0.11800 14 63 63 0.56726 0.78317 0.88200 14 64 64 0.56200 0.93286 0.04673 14 65 65 0.93800 0.93286 0.95327 14 66 66 0.06200 0.06714 0.95327 14 67 67 0.43800 0.06714 0.04673 14 68 68 0.43800 0.06714 0.95327 14 69 69 0.06200 0.06714 0.04673 14 70 70 0.93800 0.93286 0.04673 14 71 71 0.56200 0.93286 0.95327 14 72 72 0.56201 0.56710 0.07162 14 73 73 0.93799 0.56710 0.92838 14 74 74 0.06201 0.43290 0.92838 14 75 75 0.43799 0.43290 0.07162 14 76 76 0.43799 0.43290 0.92838 14 77 77 0.06201 0.43290 0.07162 14 78 78 0.93799 0.56710 0.07162 14 79 79 0.56201 0.56710 0.92838 14 80 80 0.55344 0.18209 0.07366 14 81 81 0.94656 0.18209 0.92634 14 82 82
| 0.05344 | 0.81791 | 0.92634 | 14 | 83 | 83 |
| 0.44656 | 0.81791 | 0.07366 | 14 | 84 | 84 |
| 0.44656 | 0.81791 | 0.92634 | 14 | 85 | 85 |
| 0.05344 | 0.81791 | 0.07366 | 14 | 86 | 86 |
| 0.94656 | 0.18209 | 0.07366 | 14 | 87 | 87 |
| 0.55344 | 0.18209 | 0.92634 | 14 | 88 | 88 |
| 0.55322 | 0.31790 | 0.04458 | 14 | 89 | 89 |
| 0.94678 | 0.31790 | 0.95542 | 14 | 90 | 90 |
| 0.05322 | 0.68210 | 0.95542 | 14 | 91 | 91 |
| 0.44678 | 0.68210 | 0.04458 | 14 | 92 | 92 |
| 0.44678 | 0.68210 | 0.95542 | 14 | 93 | 93 |
| 0.05322 | 0.68210 | 0.04458 | 14 | 94 | 94 |
| 0.94678 | 0.31790 | 0.04458 | 14 | 95 | 95 |
| 0.55322 | 0.31790 | 0.95542 | 14 | 96 | 96 |
| 0.55621 | 0.18155 | 0.16191 | 14 | 97 | 97 |
| 0.94379 | 0.18155 | 0.83809 | 14 | 98 | 98 |
| 0.05621 | 0.81845 | 0.83809 | 14 | 99 | 99 |
| 0.44379 | 0.81845 | 0.16191 | 14 | 100 | 100 |
| 0.44379 | 0.81845 | 0.83809 | 14 | 101 | 101 |
| 0.05621 | 0.81845 | 0.16191 | 14 | 102 | 102 |
| 0.94379 | 0.18155 | 0.16191 | 14 | 103 | 103 |
| 0.55621 | 0.18155 | 0.83809 | 14 | 104 | 104 |
| 0.25000 | 0.88108 | 0.14556 | 14 | 105 | 105 |
| 0.25000 | 0.88108 | 0.85444 | 14 | 106 | 106 |
| 0.75000 | 0.11892 | 0.85444 | 14 | 107 | 107 |
| 0.75000 | 0.11892 | 0.14556 | 14 | 108 | 108 |
| 0.25000 | 0.12585 | 0.11829 | 14 | 109 | 109 |
| 0.25000 | 0.12585 | 0.88170 | 14 | 110 | 110 |
| 0.75000 | 0.87415 | 0.88170 | 14 | 111 | 111 |
| 0.75000 | 0.87415 | 0.11829 | 14 | 112 | 112 |
| 0.25000 | 0.87951 | 0.09067 | 14 | 113 | 113 |
| 0.25000 | 0.87951 | 0.90933 | 14 | 114 | 114 |
| 0.75000 | 0.12049 | 0.90933 | 14 | 115 | 115 |
| 0.75000 | 0.12049 | 0.09067 | 14 | 116 | 116 |
| 0.25000 | 0.03268 | 0.07463 | 14 | 117 | 117 |
| 0.25000 | 0.03268 | 0.92537 | 14 | 118 | 118 |
| 0.75000 | 0.96732 | 0.92537 | 14 | 119 | 119 |
| 0.75000 | 0.96732 | 0.07463 | 14 | 120 | 120 |
| 0.25000 | 0.46758 | 0.04376 | 14 | 121 | 121 |
| 0.25000 | 0.46758 | 0.95624 | 14 | 122 | 122 |
| 0.75000 | 0.53243 | 0.95624 | 14 | 123 | 123 |
| 0.75000 | 0.53243 | 0.04376 | 14 | 124 | 124 |
| 0.25000 | 0.62067 | 0.02753 | 14 | 125 | 125 |
| 0.25000 | 0.62067 | 0.97247 | 14 | 126 | 126 |
| 0.75000 | 0.37933 | 0.97247 | 14 | 127 | 127 |
| 0.75000 | 0.37933 | 0.02753 | 14 | 128 | 128 |
| 0.25000 | 0.37468 | 0.00000 | 14 | 129 | 129 |
| 0.75000 | 0.62532 | 0.00000 | 14 | 130 | 130 |
Table 65.
Ge-Clathrate/InN
Thinner Ge Clathrate Film on InN (initial configuration)
See Figure S6.2.
10.89643 0.00000 -0.00000
-5.44821 9.43658 0.00000
0.00000 0.00000 26.29850
95 atoms
0.26262 0.13131 0.17022 32 1 1
0.86869 0.13131 0.17022 32 2 2
0.86869 0.73738 0.17022 32 3 3
0.66667 0.33333 0.21704 32 4 4
0.33333 0.66667 0.21710 32 5 5
0.41997 0.20999 0.24593 32 6 6
0.79002 0.20999 0.24593 32 7 7
0.79002 0.58003 0.24593 32 8 8
0.20999 0.41997 0.24594 32 9 9
0.20999 0.79002 0.24594 32 10 10
0.58003 0.79002 0.24594 32 11 11
0.39163 0.99998 0.28812 32 12 12
0.39163 0.39165 0.28812 32 13 13
0.60835 0.99998 0.28812 32 14 14
0.60835 0.60837 0.28812 32 15 15
0.00002 0.39165 0.28812 32 16 16
0.00002 0.60837 0.28812 32 17 17
0.00052 0.38429 0.04618 32 18 18
0.00052 0.61623 0.04618 32 19 19
0.38377 0.38429 0.04618 32 20 20
0.38377 0.99948 0.04618 32 21 21
0.61571 0.61623 0.04618 32 22 22
0.61571 0.99948 0.04618 32 23 23
0.41845 0.20923 0.09415 32 24 24
0.79077 0.20923 0.09415 32 25 25
0.79077 0.58155 0.09415 32 26 26
0.20914 0.41829 0.09469 32 27 27
0.20914 0.79086 0.09469 32 28 28
0.58171 0.79086 0.09469 32 29 29
0.66667 0.33333 0.12381 32 30 30
0.33333 0.66667 0.12389 32 31 31
0.13090 0.26180 0.17048 32 32 32
0.13090 0.86910 0.17048 32 33 33
0.73820 0.86910 0.17048 32 34 34
-0.77000 0.00000 0.35200 32 35 35
-0.76077 0.23947 0.35200 32 36 36
-0.23989 0.76044 0.35200 32 37 37
-0.23989 0.00000 0.35200 32 38 38
| -0.03003 | 0.76052 | 0.35200 | 32 | 39 | 39 |
| -0.03003 | 0.23956 | 0.35200 | 32 | 40 | 40 |
| 0.00000 | 0.00000 | 0.30200 | 32 | 41 | 41 |
| 0.66667 | 0.33333 | 0.73784 | 49 | 42 | 42 |
| 0.33333 | 0.66667 | 0.73561 | 49 | 43 | 43 |
| 0.00000 | 0.00000 | 0.73969 | 49 | 44 | 44 |
| 0.00385 | 0.33274 | 0.72373 | 49 | 45 | 45 |
| 0.00385 | 0.67111 | 0.72373 | 49 | 46 | 46 |
| 0.32889 | 0.33274 | 0.72373 | 49 | 47 | 47 |
| 0.32889 | 0.99615 | 0.72373 | 49 | 48 | 48 |
| 0.66726 | 0.67111 | 0.72373 | 49 | 49 | 49 |
| 0.66726 | 0.99615 | 0.72373 | 49 | 50 | 50 |
| 0.43857 | 0.21928 | 0.83677 | 49 | 51 | 51 |
| 0.78072 | 0.21928 | 0.83677 | 49 | 52 | 52 |
| 0.78072 | 0.56143 | 0.83677 | 49 | 53 | 53 |
| 0.11075 | 0.22151 | 0.84237 | 49 | 54 | 54 |
| 0.11075 | 0.88925 | 0.84237 | 49 | 55 | 55 |
| 0.77850 | 0.88925 | 0.84237 | 49 | 56 | 56 |
| 0.11170 | 0.55585 | 0.83822 | 49 | 57 | 57 |
| 0.44415 | 0.55585 | 0.83822 | 49 | 58 | 58 |
| 0.44415 | 0.88830 | 0.83822 | 49 | 59 | 59 |
| 0.56097 | 0.12193 | 0.94440 | 49 | 60 | 60 |
| 0.56097 | 0.43903 | 0.94440 | 49 | 61 | 61 |
| 0.87807 | 0.43903 | 0.94440 | 49 | 62 | 62 |
| 0.22710 | 0.45421 | 0.95022 | 49 | 63 | 63 |
| 0.22710 | 0.77290 | 0.95022 | 49 | 64 | 64 |
| 0.54580 | 0.77290 | 0.95022 | 49 | 65 | 65 |
| 0.21562 | 0.10781 | 0.95497 | 49 | 66 | 66 |
| 0.89219 | 0.10781 | 0.95497 | 49 | 67 | 67 |
| 0.89219 | 0.78438 | 0.95497 | 49 | 68 | 68 |
| 0.11198 | 0.22396 | 0.75643 | 7 | 69 | 69 |
| 0.11198 | 0.88802 | 0.75643 | 7 | 70 | 70 |
| 0.77604 | 0.88802 | 0.75643 | 7 | 71 | 71 |
| 0.43990 | 0.21995 | 0.75028 | 7 | 72 | 72 |
| 0.78005 | 0.21995 | 0.75028 | 7 | 73 | 73 |
| 0.78005 | 0.56010 | 0.75028 | 7 | 74 | 74 |
| 0.10927 | 0.55463 | 0.75192 | 7 | 75 | 75 |
| 0.44537 | 0.55463 | 0.75192 | 7 | 76 | 76 |
| 0.44537 | 0.89073 | 0.75192 | 7 | 77 | 77 |
| 0.55592 | 0.11184 | 0.86040 | 7 | 78 | 78 |
| 0.55592 | 0.44408 | 0.86040 | 7 | 79 | 79 |
| 0.88816 | 0.44408 | 0.86040 | 7 | 80 | 80 |
| 0.22427 | 0.11213 | 0.86930 | 7 | 81 | 81 |
| 0.88787 | 0.11213 | 0.86930 | 7 | 82 | 82 |
| 0.88787 | 0.77573 | 0.86930 | 7 | 83 | 83 |
| 0.22254 | 0.44508 | 0.86554 | 7 | 84 | 84 |
| 0.22254 | 0.77746 | 0.86554 | 7 | 85 | 85 |
| 0.55492 | 0.77746 | 0.86554 | 7 | 86 | 86 |
| 0.33884 | 0.00024 | 0.97522 | 7 | 87 | 87 |
Table 9.
0.33884 0.33860 0.97522 7 88 88
0.66140 0.00024 0.97522 7 89 89
0.66140 0.66116 0.97522 7 90 90
0.99976 0.33860 0.97522 7 91 91
0.99976 0.66116 0.97522 7 92 92
0.00000 0.00000 0.98093 7 93 93
0.66667 0.33333 0.97516 7 94 94
0.33333 0.66667 0.98001 7 95 95
Thicker Ge Clathrate Film on InN (initial configuration)
See Figure S6.6.
10.89643 0.00000 -0.00000
-5.44821 9.43658 0.00000
0.00000 0.00000 50.00000
129 atoms
1.00700 1.00700 0.36991 32 1 1
0.34644 0.06187 0.16999 32 2 2
-0.04787 0.29157 0.16999 32 3 3
-0.27757 -0.33244 0.16999 32 4 4
-0.27757 0.06187 0.16999 32 5 5
0.34644 0.29157 0.16999 32 6 6
-0.04787 -0.33244 0.16999 32 7 7
-0.04176 0.28546 0.03126 32 8 8
0.33423 0.05576 0.03126 32 9 9
-0.27146 -0.32023 0.03126 32 10 10
0.33423 0.28546 0.03126 32 11 11
-0.27146 0.05576 0.03126 32 12 12
-0.04176 -0.32023 0.03126 32 13 13
-0.37510 -0.38120 0.21851 32 14 14
0.00089 0.38910 0.21851 32 15 15
0.39520 0.01311 0.21851 32 16 16
0.00089 -0.38120 0.21851 32 17 17
0.39520 0.38910 0.21851 32 18 18
-0.37510 0.01311 0.21851 32 19 19
-0.45167 0.46567 0.05657 32 20 20
-0.45167 0.08966 0.05657 32 21 21
-0.07566 0.46567 0.05657 32 22 22
0.21500 -0.20100 0.24382 32 23 23
0.21500 0.42299 0.24382 32 24 24
-0.40899 -0.20100 0.24382 32 25 25
-0.24367 -0.11834 0.14468 32 26 26
0.13234 0.25767 0.14468 32 27 27
0.13234 -0.11834 0.14468 32 28 28
0.00700 0.00700 0.07722 32 29 29
-0.32633 0.34033 0.26447 32 30 30
| -0.32633 | 0.34033 | 0.12403 | 32 | 31 | 31 |
| -0.44907 | 0.46307 | 0.14127 | 32 | 32 | 32 |
| -0.44907 | 0.09486 | 0.14127 | 32 | 33 | 33 |
| -0.08086 | 0.46307 | 0.14127 | 32 | 34 | 34 |
| -0.23847 | -0.11574 | 0.05998 | 32 | 35 | 35 |
| 0.12974 | 0.25247 | 0.05998 | 32 | 36 | 36 |
| 0.12974 | -0.11574 | 0.05998 | 32 | 37 | 37 |
| 0.42819 | 0.21760 | 0.24723 | 32 | 38 | 38 |
| -0.20360 | -0.41419 | 0.24723 | 32 | 39 | 39 |
| -0.20360 | 0.21760 | 0.24723 | 32 | 40 | 40 |
| 0.00700 | 0.00700 | 0.12893 | 32 | 41 | 41 |
| -0.32633 | 0.34033 | 0.07232 | 32 | 42 | 42 |
| 0.34033 | -0.32633 | 0.25957 | 32 | 43 | 43 |
| 0.47177 | -0.45777 | 0.09958 | 32 | 44 | 44 |
| 0.47177 | -0.06346 | 0.09958 | 32 | 45 | 45 |
| 0.07746 | -0.45777 | 0.09958 | 32 | 46 | 46 |
| 0.13844 | -0.12444 | 0.28683 | 32 | 47 | 47 |
| 0.13844 | 0.26987 | 0.28683 | 32 | 48 | 48 |
| -0.25587 | -0.12444 | 0.28683 | 32 | 49 | 49 |
| -0.39679 | -0.19490 | 0.10167 | 32 | 50 | 50 |
| 0.20890 | 0.41079 | 0.10167 | 32 | 51 | 51 |
| 0.20890 | -0.19490 | 0.10167 | 32 | 52 | 52 |
| 0.01311 | 0.39520 | 0.35723 | 32 | 53 | 53 |
| -0.38120 | -0.37510 | 0.35723 | 32 | 54 | 54 |
| 0.38910 | 0.00089 | 0.35723 | 32 | 55 | 55 |
| 0.38910 | 0.39520 | 0.35723 | 32 | 56 | 56 |
| 0.01311 | -0.37510 | 0.35723 | 32 | 57 | 57 |
| -0.38120 | 0.00089 | 0.35723 | 32 | 58 | 58 |
| 0.42299 | 0.21500 | 0.33193 | 32 | 59 | 59 |
| -0.20100 | -0.40899 | 0.33193 | 32 | 60 | 60 |
| -0.20100 | 0.21500 | 0.33193 | 32 | 61 | 61 |
| 0.34033 | -0.32633 | 0.31128 | 32 | 62 | 62 |
| 0.21760 | -0.20360 | 0.32852 | 32 | 63 | 63 |
| 0.21760 | 0.42819 | 0.32852 | 32 | 64 | 64 |
| -0.41419 | -0.20360 | 0.32852 | 32 | 65 | 65 |
| -0.32633 | 0.34033 | 0.31618 | 32 | 66 | 66 |
| 0.26987 | 0.13844 | 0.28892 | 32 | 67 | 67 |
| -0.12444 | -0.25587 | 0.28892 | 32 | 68 | 68 |
| -0.12444 | 0.13844 | 0.28892 | 32 | 69 | 69 |
| 0.76744 | 1.76743 | 0.39949 | 32 | 70 | 70 |
| 0.76744 | 1.00700 | 0.39949 | 32 | 71 | 71 |
| 1.00700 | 1.76743 | 0.39949 | 32 | 72 | 72 |
| 1.00700 | 1.24656 | 0.39949 | 32 | 73 | 73 |
| 0.24656 | 1.00700 | 0.39949 | 32 | 74 | 74 |
| 0.24656 | 1.24656 | 0.39949 | 32 | 75 | 75 |
| 0.66667 | 0.33333 | -0.13789 | 49 | 76 | 76 |
| 0.33333 | 0.66667 | -0.13906 | 49 | 77 | 77 |
| 0.00000 | 0.00000 | -0.13692 | 49 | 78 | 78 |
| 0.00385 | 0.33274 | -0.14531 | 49 | 79 | 79 |
| 0.00385 | 0.67111 | -0.14531 | 49 | 80 | 80 |
| 0.32889 | 0.33274 | -0.14531 | 49 | 81 | 81 |
| 0.32889 | 0.99615 | -0.14531 | 49 | 82 | 82 |
| 0.66726 | 0.67111 | -0.14531 | 49 | 83 | 83 |
| 0.66726 | 0.99615 | -0.14531 | 49 | 84 | 84 |
| 0.43857 | 0.21928 | -0.08586 | 49 | 85 | 85 |
| 0.78072 | 0.21928 | -0.08586 | 49 | 86 | 86 |
| 0.78072 | 0.56143 | -0.08586 | 49 | 87 | 87 |
| 0.11075 | 0.22151 | -0.08291 | 49 | 88 | 88 |
| 0.11075 | 0.88925 | -0.08291 | 49 | 89 | 89 |
| 0.77850 | 0.88925 | -0.08291 | 49 | 90 | 90 |
| 0.11170 | 0.55585 | -0.08509 | 49 | 91 | 91 |
| 0.44415 | 0.55585 | -0.08509 | 49 | 92 | 92 |
| 0.44415 | 0.88830 | -0.08509 | 49 | 93 | 93 |
| 0.56097 | 0.12193 | -0.02925 | 49 | 94 | 94 |
| 0.56097 | 0.43903 | -0.02925 | 49 | 95 | 95 |
| 0.87807 | 0.43903 | -0.02925 | 49 | 96 | 96 |
| 0.22710 | 0.45421 | -0.02618 | 49 | 97 | 97 |
| 0.22710 | 0.77290 | -0.02618 | 49 | 98 | 98 |
| 0.54580 | 0.77290 | -0.02618 | 49 | 99 | 99 |
| 0.21562 | 0.10781 | -0.02368 | 49 | 100 | 100 |
| 0.89219 | 0.10781 | -0.02368 | 49 | 101 | 101 |
| 0.89219 | 0.78438 | -0.02368 | 49 | 102 | 102 |
| 0.11198 | 0.22396 | -0.12811 | 7 | 103 | 103 |
| 0.11198 | 0.88802 | -0.12811 | 7 | 104 | 104 |
| 0.77604 | 0.88802 | -0.12811 | 7 | 105 | 105 |
| 0.43990 | 0.21995 | -0.13134 | 7 | 106 | 106 |
| 0.78005 | 0.21995 | -0.13134 | 7 | 107 | 107 |
| 0.78005 | 0.56010 | -0.13134 | 7 | 108 | 108 |
| 0.10927 | 0.55463 | -0.13049 | 7 | 109 | 109 |
| 0.44537 | 0.55463 | -0.13049 | 7 | 110 | 110 |
| 0.44537 | 0.89073 | -0.13049 | 7 | 111 | 111 |
| 0.55592 | 0.11184 | -0.07343 | 7 | 112 | 112 |
| 0.55592 | 0.44408 | -0.07343 | 7 | 113 | 113 |
| 0.88816 | 0.44408 | -0.07343 | 7 | 114 | 114 |
| 0.22427 | 0.11213 | -0.06875 | 7 | 115 | 115 |
| 0.88787 | 0.11213 | -0.06875 | 7 | 116 | 116 |
| 0.88787 | 0.77573 | -0.06875 | 7 | 117 | 117 |
| 0.22254 | 0.44508 | -0.07072 | 7 | 118 | 118 |
| 0.22254 | 0.77746 | -0.07072 | 7 | 119 | 119 |
| 0.55492 | 0.77746 | -0.07072 | 7 | 120 | 120 |
| 0.33884 | 0.00024 | -0.01303 | 7 | 121 | 121 |
| 0.33884 | 0.33860 | -0.01303 | 7 | 122 | 122 |
| 0.66140 | 0.00024 | -0.01303 | 7 | 123 | 123 |
| 0.66140 | 0.66116 | -0.01303 | 7 | 124 | 124 |
| 0.99976 | 0.33860 | -0.01303 | 7 | 125 | 125 |
| 0.99976 | 0.66116 | -0.01303 | 7 | 126 | 126 |
| 0.00000 | 0.00000 | -0.01003 | 7 | 127 | 127 |
| 0.66667 | 0.33333 | -0.01307 | 7 | 128 | 128 |
| 0.33333 | 0.66667 | -0.01051 | 7 | 129 | 129 |
Table 10.
Tabulated Dependencies
of Sn
| [at./Å] | [ML] | [eV/at.] | [meV/at.] | [eV] | sample designation |
| 0.1422 | 1.356 | -3.6043 | 265 | 0.038 | db-monolayer (oP10) |
| 0.1741 | 1.660 | -3.6159 | 253 | 0.000 | db-monolayer (hP11) |
| 0.1425 | 1.358 | -3.6268 | 242 | 0.065 | Sn9-web (40 atoms) |
| 0.1749 | 1.667 | -3.6530 | 216 | 0.000 | Sn9-web (100 atoms) |
| 0.2224 | 2.120 | -3.6707 | 198 | 0.000 | triangles (bilayer) |
| 0.4449 | 4.241 | -3.7092 | 160 | 0.000 | triangles ( bilayer) |
| 0.2448 | 2.334 | -3.7103 | 159 | 0.000 | squares (bilayer) |
| 0.4850 | 4.623 | -3.7384 | 130 | 0.000 | squares ( bilayer) |
| 0.7115 | 6.783 | -3.7499 | 119 | 0.000 | squares ( bilayer) |
| 0.3428 | 3.268 | -3.7268 | 142 | 0.000 | Sn.equi-II-3 |
| 0.5501 | 5.244 | -3.7731 | 96 | 0.250 | Sn.equi-II-5 |
| 0.7981 | 7.608 | -3.7934 | 75 | 0.263 | Sn.equi-II-7.5 |
| 1.0470 | 9.981 | -3.8041 | 65 | 0.266 | Sn.equi-II-10 |
| 0.2629 | 2.506 | -3.6568 | 212 | 0.000 | -dia (bilayer) |
| 0.2578 | 2.458 | -3.6219 | 247 | 0.000 | -dia (bilayer) |
| 0.3578 | 3.411 | -3.6906 | 178 | 0.000 | -dia (trilayer) |
| 0.4618 | 4.402 | -3.7257 | 143 | 0.000 | -dia (fourlayer) |
| 0.5663 | 5.398 | -3.7512 | 118 | 0.000 | -dia (fivelayer) |
| 0.6705 | 6.392 | -3.7674 | 101 | 0.000 | -dia (sixlayer) |
| 0.7754 | 7.392 | -3.7810 | 88 | 0.000 | -dia (sevenlayer) |
| 0.8803 | 8.392 | -3.7909 | 78 | 0.000 | -dia (eightlayer) |
| 0.9854 | 9.394 | -3.7986 | 70 | 0.000 | -dia (ninelayer) |
Table S10.1. Table S10.1: Tabulated content of Figure 6 (main text) for Sn thin films. “KS” denotes total Kohn-Sham energy as a direct output of VASP (without dispersion vdW correction). For unit conversion: thickness of 1ML of (111)-diamond cF8 Sn is at./Å and the respective bulk Kohn-Sham per-atom energy eV/at. stands for the width of electronic band gap.
of Ge
| [at./Å] | [ML] | [eV/at.] | [meV/at.] | [eV] | sample designation |
| 0.1884 | 1.359 | -4.2083 | 308 | 0.100 | db-monolayer (oP10) |
| 0.2367 | 1.707 | -4.1636 | 352 | 0.000 | GS-bilayer |
| 0.3534 | 2.549 | -4.2648 | 251 | 0.256 | Ge.iso-II-2.5 |
| 0.4037 | 2.911 | -4.2941 | 222 | 0.400 | Ge.equi-II-3 |
| 0.4781 | 3.448 | -4.3328 | 183 | 0.428 | Ge.equi-II-3.5 |
| 0.5461 | 3.938 | -4.3404 | 176 | 0.217 | Ge.iso-II-4 |
| 0.8042 | 5.800 | -4.3957 | 120 | 0.517 | Ge.equi-II-6 |
| 0.3455 | 2.492 | -4.2535 | 262 | 0.000 | -dia (bilayer) |
| 0.3331 | 2.402 | -4.2252 | 291 | 0.133 | -dia (bilayer) |
| 0.4683 | 3.377 | -4.2950 | 221 | 0.000 | -dia (trilayer) |
| 0.6059 | 4.370 | -4.3404 | 176 | 0.000 | -dia (fourlayer) |
| 0.7440 | 5.366 | -4.3736 | 142 | 0.000 | -dia (fivelayer) |
| 0.8822 | 6.362 | -4.3948 | 121 | 0.000 | -dia (sixlayer) |
| 1.0208 | 7.362 | -4.4118 | 104 | 0.022 | -dia (sevenlayer) |
| 1.1585 | 8.355 | -4.4245 | 91 | 0.057 | -dia (eightlayer) |
| 1.2982 | 9.362 | -4.4343 | 82 | 0.108 | -dia (ninelayer) |
Table S10.2.1. Table S10.2.1: Tabulated content of Figure 6 *(main text) for Ge thin films. “KS” denotes total Kohn-Sham energy as a direct output of VASP (without dispersion vdW correction). For unit conversion: thickness of 1ML of (111)-diamond cF8 Ge is at./Å and the respective bulk Kohn-Sham per-atom energy eV/at. stands for the width of electronic band gap.
| [at./Å] | [ML] | [eV/at.] | [meV/at.] | [eV] | sample designation |
| 0.1924 | 1.361 | -4.3810 | 389 | 0.000 | db-monolayer (oP10) |
| 0.3591 | 2.540 | -4.4461 | 323 | 0.000 | Ge.iso-II-2.5 |
| 0.5612 | 3.970 | -4.5343 | 235 | 0.255 | Ge.iso-II-4 |
| 0.7908 | 5.595 | -4.5855 | 184 | 0.435 | Ge.iso-II-5.5 |
| 0.4107 | 2.905 | -4.4844 | 285 | 0.455 | Ge.equi-II-3 |
| 0.4912 | 3.475 | -4.5313 | 238 | 0.490 | Ge.equi-II-3.5 |
| 0.8137 | 5.756 | -4.5952 | 174 | 0.450 | Ge.equi-II-6 |
| 0.3510 | 2.483 | -4.4444 | 325 | 0.000 | -dia (bilayer) |
| 0.4771 | 3.374 | -4.5069 | 263 | 0.000 | -dia (trilayer) |
| 0.6320 | 4.471 | -4.5609 | 209 | 0.000 | -dia (fourlayer) |
| 0.7712 | 5.456 | -4.5959 | 174 | 0.000 | -dia (fivelayer) |
| 1.0492 | 7.422 | -4.6433 | 126 | 0.000 | -dia (sevenlayer) |
| 0.4276 | 3.025 | -4.4632 | 307 | 0.000 | -DAS (trilayer) |
| 0.5650 | 3.997 | -4.5296 | 240 | 0.000 | -DAS (fourlayer) |
Table S10.2.2. Table S10.2.2: Tabulated content of Figure S7.1 *(SM) for Ge thin films. “KS” denotes total Kohn-Sham energy as a direct output of VASP, with dispersion vdW correction (PBE-
D3, IVDW=12). For unit conversion: thickness of 1 ML of (111)-diamond cF8 Ge is at./Å and the respective bulk Kohn-Sham per-atom energy eV/at. stands for the width of electronic band gap.
of Si
| [at./Å] | [ML] | [eV/at.] | [meV/at.] | [eV] | sample designation |
| 0.2110 | 1.364 | -4.9906 | 430 | 0.650 | db-monolayer (oP10) |
| 0.2709 | 1.751 | -4.9566 | 464 | 0.000 | GS-bilayer |
| 0.3851 | 2.489 | -5.0987 | 322 | 0.467 | Si.iso-II-2.5 |
| 0.5032 | 3.253 | -5.1399 | 280 | 0.950 | Si.equi-II-3 |
| 0.6056 | 3.915 | -5.1885 | 232 | 0.837 | Si.iso-II-4 |
| 0.8272 | 5.347 | -5.2338 | 186 | 0.762 | Si.iso-II-5 |
| 0.3866 | 2.499 | -5.0643 | 356 | 0.138 | -dia (bilayer) |
| 0.3690 | 2.385 | -5.0080 | 412 | 0.000 | -dia (bilayer) |
| 0.5263 | 3.402 | -5.1245 | 296 | 0.450 | -dia (trilayer) |
| 0.6788 | 4.388 | -5.1834 | 237 | 0.300 | -dia (fourlayer) |
| 0.8339 | 5.391 | -5.2279 | 192 | 0.465 | -dia (fivelayer) |
| 0.9874 | 6.383 | -5.2561 | 164 | 0.436 | -dia (sixlayer) |
| 1.1423 | 7.384 | -5.2792 | 141 | 0.450 | -dia (sevenlayer) |
| 1.2969 | 8.384 | -5.2961 | 124 | 0.473 | -dia (eightlayer) |
| 1.4515 | 9.383 | -5.3094 | 111 | 0.480 | -dia (ninelayer) |
Table 11.
| [at./Å] | [ML] | [eV/at.] | [meV/at.] | [eV] | sample designation |
| 0.2127 | 1.351 | -5.1751 | 550 | 0.508 | db-monolayer (oP10) |
| 0.3903 | 2.479 | -5.3273 | 398 | 0.371 | Si.iso-II-2.5 |
| 0.6131 | 3.894 | -5.4256 | 300 | 0.787 | Si.iso-II-4 |
| 0.8376 | 5.320 | -5.4762 | 249 | 0.731 | Si.iso-II-5.5 |
| 0.5105 | 3.242 | -5.3773 | 348 | 0.950 | Si.equi-II-3 |
| 0.5381 | 3.417 | -5.3957 | 329 | 0.847 | Si.equi-II-3.5 |
| 0.3919 | 2.488 | -5.3044 | 421 | 0.000 | -dia (bilayer) |
| 0.5356 | 3.402 | -5.3874 | 338 | 0.420 | -dia (trilayer) |
| 0.8462 | 5.374 | -5.5051 | 220 | 0.334 | -dia (fivelayer) |
| 0.4755 | 3.020 | -5.3460 | 379 | 0.000 | -DAS (trilayer) |
| 0.6305 | 4.004 | -5.4274 | 298 | 0.000 | -DAS (fourlayer) |
| 0.4435 | 2.817 | -5.2692 | 456 | 0.034 | a-Si (trilayer) |
| 0.6143 | 3.901 | -5.3652 | 360 | 0.070 | a-Si (fourlayer, cF8 nuclei) |
Table S10.3.1. Tabulated content of Figure 6 (main text) for Si thin films. “KS” denotes total Kohn-Sham energy as a direct output of VASP (without dispersion vdW correction). For unit conversion: thickness of 1ML of (111)-diamond cF8 Si is at./Å and the respective bulk Kohn-Sham per-atom energy eV/at. stands for the width of electronic band gap.
Table S10.3.2: Tabulated content of Figure S7.1 (SM) for Si thin films. “KS” denotes total Kohn-Sham energy as a direct output of VASP, with dispersion vdW correction (PBE-D3, IVDW=12). For unit conversion: thickness of 1 ML of (111)-diamond cF8 Si is and the respective bulk Kohn-Sham per-atom energy . stands for the width of electronic band gap.
References
- [1]C. J. Pickard, R. J. Needs: Hypothetical Low-Energy Chiral Framework Structure of Group 14 Elements. Physical Review B, VOLUME 81, ISSUE 1: 014106, 2010. URL https://link.aps.org/doi/10.1103/PhysRevB.81.014106.DOI
- [2]E. Pospíšilová, M. Mihalkovič: Prediction of Coherent Interfaces between Diamond and Clathrate Structures. Computational Materials Science, VOLUME 226: 112228, 2023. URL https://doi.org/10.1016/j.commatsci.2023.112228.
- [3]Y. Zhang, A. Rubio and G. Le Lay: Emergent Elemental Two-Dimensional Materials beyond Graphene. Journal of Physics D: Applied Physics, VOLUME 50, ISSUE 5: 053004, 2017. URL https://doi.org/10.1088/1361-6463/aa4e8b.
- [4]J. Deng, B. Xia, X. Ma, et al.: Epitaxial Growth of Ultraflat Stanene with Topological Band Inversion. Nature Materials, VOLUME 17: 1081, 2018. URL https://doi.org/10.1038/s41563-018-0203-5.
- [5]F. Matusalem, M. Marques, L. K. Teles and F. Bechstedt: Stability and Electronic Structure of Two-Dimensional Allotropes of Group-IV Materials. PHYSICAL REVIEW B, VOLUME 92, ISSUE 4: 045436, 2015. URL https://doi.org/10.1103/PhysRevB.92.045436.
- [6]P. Borlido, C. Rödl, M. A. L. Marques and S. Botti: The Ground State of Two-Dimensional Silicon. 2D Materials, VOLUME 5, ISSUE 3: 035010, 2018. URL https://doi.org/10.1088/2053-1583/aab9ea.
- [7]S. Cahangirov, O. Özçelik, L. Xian, J. Avila: Atomic Structure of the √3 × √3 Phase of Silicene on Ag(111). Physical Review B, VOLUME 90: 035448, 2014. URL https://doi.org/10.1103/PhysRevB.90.035448.
- [8]S. Saxena, R. P. Chaudhary & S. Shukla: Stanene: Atomically Thick Free-standing Layer of 2D Hexagonal Tin. Scientific Reports, VOLUME 6: 31073, 2016. URL https://doi.org/10.1038/srep31073.
- [9]Peizhe Tang et al.: Stable Two-Dimensional Dumbbell Stanene: A Quantum Spin Hall Insulator. Physical Review B, VOLUME 90, ISSUE 12: 121408, 2014. URL https://link.aps.org/doi/10.1103/PhysRevB.90.121408.DOI
- [10]Yong Xu et al.: Large-Gap Quantum Spin Hall Insulators in Tin Films. Physical Review Letters, VOLUME 111: 136804, 2013. URL https://doi.org/10.1103/PhysRevLett.111.136804.
- [11]M. Liao, Y. Zang, Z. Guan et al.: Superconductivity in Few-Layer Stanene. Nature Physics, VOLUME 14: 344, 2018. URL https://doi.org/10.1038/s41567-017-0031-6.
- [12]M. E. Dávila, L. Xian, S. Cahangirov, A. Rubio and G. L. Lay: Germanene: A Novel Two-Dimensional Germanium Allotrope Akin to Graphene and Silicene. New Journal of Physics, VOLUME 16: 095002, 2014. URL https://doi.org/10.1088/1367-2630/16/9/095002.
- [13]P. Vogt et al.: Silicene: Compelling Experimental Evidence for Graphene-Like Two-Dimensional Silicon. Physical Review Letters, VOLUME 108: 155501, 2012. URL https://doi.org/10.1103/PhysRevLett.108.155501.
- [14]V. O. Özçelik, E. Durgun, and S. Ciraci: New Phases of Germanene. The Journal of Physical Chemistry Letters, VOLUME 5, ISSUE 15: 2694, 2014. URL https://doi.org/10.1021/jz500977v.
- [15]A. Popescu, P. Rodriguez-Lopez, and L. M. Woods: Composition and Stacking Dependent Topology in Bilayers from the Graphene Family. Physical Review Materials, VOLUME 3: 064002, 2019. URL https://doi.org/10.1103/PhysRevMaterials.3.064002.
- [16]H. Fu, J. Zhang, Zijing Ding, Hui Li, Sheng Meng: Stacking-Dependent Electronic Structure of Bilayer Silicene. Applied Physics Letters, VOLUME 104, NUMBER 13: 131904, 2014. URL https://doi.org/10.1063/1.4870534.
- [17]J. E. Padilha and R. B. Pontes: Free-Standing Bilayers Silicene: The Effect of Stacking Order on the Structural, Electronic and Transport Properties. The Journal of Physi- [18] B. Feng, Z. Ding, S. Meng, Y. Yao, X. He, P. Cheng, L. Chen and K. Wu: Evidence of Silicene in Honeycomb Structures of Silicon on Ag(111). Nano Letters, VOLUME 12, NUMBER 7: 3507, 2012. URL https://doi.org/10.1021/nl301047g.
- [19]R. Arafune, C.-L. Lin, K. Kawahara, N. Tsukahara, E. Minamitani, Y. Kim, N. Takagi, M. Kawai: Structural Transition of Silicene on Ag(111). Surface Science, VOLUME 608: 297, 2013. URL https://doi.org/10.1016/j.susc.2012.10.022.
- [20]Q. Xiong, W. Cen, X. Wu, C. Chen, L. Lv: Effect of Stacking Mode on Electronic Structure and Optical Properties of Bilayer Germanene. Solid State Communications, VOLUME 360: 115036, 2023. URL https://doi.org/10.1016/j.ssc.2022.115036.
- [21]P. Borlido et al.: Structural Prediction of Stabilized Atomically Thin Layers. npj 2D Materials and Applications, VOLUME 3, ISSUE 21, 2019. URL https://doi.org/10.1038/s41699-019-0103-9.
- [22]Materials Project, Materials Virtual Lab. http://crystalium.materialsvirtuallab.org/. Accessed: 2025-02-15.
- [23]A. A. Stekolnikov and F. Bechstedt: Shape of Free and Constrained Group-IV Crystallites: Influence of Surface Energies. Physical Review B, VOLUME 72, ISSUE 12: 125326, 2005. URL https://link.aps.org/doi/10.1103/PhysRevB.72.125326.DOI
- [24]A. A. Stekolnikov, J. Furthmüller, and F. Bechstedt: Absolute Surface Energies of Group-IV Semiconductors: Dependence on Orientation and Reconstruction. Physical Review B, VOLUME 65, ISSUE 11: 115318, 2002. URL https://link.aps.org/doi/10.1103/PhysRevB.65.115318.DOI
- [25]G.-H. Lu, M. Huang, M. Cuma, F. Liu: Relative Stability of Si Surfaces: A First-Principles Study. Surface Science, VOLUME 588, ISSUE 1-3: 61, 2005. URL https://doi.org/10.1016/j.susc.2005.05.028.
- [26]G. V. Gadiyak, A. A. Karpushin, A. S. Kushkova, Yu. N. Morokov, S. M. Repinskiy, A. A. Shklyaev: Wulff’s Diagram for the Surfaces of Silicon and Germanium. Quantum Chemical Calculation. Physics, Chemistry and Mechanics of Surfaces, VOLUME 3, 1988. URL https://www.researchgate.net/profile/Yuri-Morokov/publication/301617910_Wulff’s_diagram_for_the_surfaces_of_silicon_and_germanium_Quantum_chemical_calculation/links/571d8fca08ae408367be5b07/Wulffs-diagram-for-the-surfaces-of-silicon-and-germanium-Quantum-chemical-calculation.pdf.
- [27]G. V. Gadiyak, Yu. N. Morokov, A. S. Kushkova, S. M. Repinskii, and A. A. Shklyaev: Calculation of Wulff’s Diagram for Germanium. Physics, Chemistry and Mechanics of Surfaces, VOLUME 3, NUMBER 7: 1978, 1985. URL https://www.researchgate.net/profile/Yuri-Morokov/publication/295087759_Calculation_of_Wulff’s_diagram_for_germanium/links/571a664b08ae408367bc8b24/Calculation-of-Wulffs-diagram-for-germanium.pdf.
- [28]J.-Y. Lee et al.: The Surface Energy and Stress of Metals. Surface Science, VOLUME 674: 51, 2018. URL https://doi.org/10.1016/j.susc.2018.03.008.
- [29]R. Zhachuk, J. Coutinho, A. Dolbak, V. Cherepanov, and B. Voigtländer: Si(111) Strained Layers on Ge(111): Evidence for c(2×4) Domains. Physical Review B, VOLUME 96, ISSUE 8: 085401, 2017. URL https://link.aps.org/doi/10.1103/PhysRevB.96.085401.DOI
- [30]A. A. Baski, S. C. Erwin, L. J. Whitman: The Structure of Silicon Surfaces from (001) to (111). Surface Science, VOLUME 392, ISSUES 1-3: 69, 1997. URL https://doi.org/10.1016/S0039-6028(97)00499-8.
- [31]R. A. Zhachuk, and J. Coutinho: Crucial Role of Vibrational Entropy in the Si(111)-7 × 7 Surface Structure Stability. Physical Review B, VOLUME 105, ISSUE 24: 245306, 2022. URL https://link.aps.org/doi/10.1103/PhysRevB.105.245306.DOI
- [32]R. Zhachuk, S. Teys, J. Coutinho: Strain-Induced Structure Transformations on Si(111) and Ge(111) Surfaces: A Combined Density-Functional and Scannning Tunnelling Microscopy Report. The Journal of Chemical Physics, VOLUME 138, ISSUE 22: 224702, 2013. URL https://doi.org/10.1063/1.4808356.
- [33]V. K. Singh, E. Pospišilová, M. Mihalkovič, S. R. Barman et al.: Decagonal Sn Clathrate on d-Al-Ni-Co. Physical Review B, VOLUME 107, ISSUE 4: 045410, 2023. URL https://link.aps.org/doi/10.1103/PhysRevB.107.045410.DOI
- [34]V. K. Singh, M. Mihalkovič, M. Krajčí, S. Sarkar, P. Sadhukhan, M. Mankraj, A. Rai, K. Pussi, D. L. Schlagel, T. A. Lograsso, A. K. Shukla, S. R. Barman: Quasiperiodic Ordering in Thick Sn Layer on i-Al-Pd-Mn: A Possible Quasicrystalline Clathrate. Physical Review Research, VOLUME 2, ISSUE 1: 013023, 2020. URL https://doi.org/10.1103/PhysRevResearch.2.013023.
- [35]R. Kumar, Y. Hazama, F. Ohashi, H. S. Jha, T. Kume: A Fabrication Method for Type-II Ge Clathrate Film by Annealing of Ge Film Covered with Na Layer. Thin Solid Films, VOLUME 734: 138859, 2021. URL https://doi.org/10.1016/j.tsf.2021.138859.
- [36]T. Kume et al.: A Thin Film of a Type II Ge Clathrate Epitaxially Grown on a Ge Substrate. CrystEngComm, VOLUME 18, ISSUE 30: 5630, 2016. URL https://doi.org/10.1039/C6CE01148A.
- [37]E. G. Noya, I. Zubieta, D. J. Pine, and F. Sciortino: Assembly of Clathrates from Tetrahedral Patchy Colloids with Narrow Patches. The Journal of Chemical Physics, VOLUME 151, ISSUE 9: 094502, 2019. URL https://doi.org/10.1063/1.5109382.
- [38]M. H. Factorovich, P. M. Naullage, and V. Molinero: Can Clathrates Heterogeneously Nucleate Ice? The Journal of Chemical Physics, VOLUME 151, ISSUE 11: 114707, 2019. URL https://doi.org/10.1063/1.5119823.
- [39]V. Molinero and E. B. Moore: Water Modeled As an Intermediate Element between Carbon and Silicon. The Journal of Physical Chemistry B, VOLUME 113, NUMBER 13: 4008, 2008. URL https://doi.org/10.1021/jp805227c.
- [40]A. D. Martinez, L. Krishna, L. L. Baranowski, M. T. Lusk, E. S. Toberer, and A. C. Tamboli: Synthesis of Group IV Clathrates for Photovoltaics. IEEE Journal of Photovoltaics, VOLUME 3, NUMBER 4: 1305, 2013. URL https://doi.org/10.1109/JPHOTOV.2013.2276478.
- [41]D. Connétable, V. Timoshevskii, E. Artacho, and X. Blase: Tailoring Band Gap and Hardness by Intercalation: An ab initio Study of I8@Si-46 and Related Doped Clathrates. Physical Review Letters, VOLUME 87, NUMBER 20: 206405, 2001. URL https://doi.org/10.1103/PhysRevLett.87.206405.
- [42]K. Moriguchi, S. Munetoh, and A. Shintani: First-Principles Study of Si₃₄₋ₓGeₓ Clathrates: Direct Wide-Gap Semiconductors in Si-Ge Alloys. Physical Review B, VOLUME 62, NUMBER 11: 7138, 2000. URL https://doi.org/10.1103/PhysRevB.62.7138.
- [43]L. Grigorian, P. C. Eklund, S. Fang: Clathrate Structure for Electronic and Electro-Optic Applications. University of Kentucky, Physics and Astronomy Faculty, NUMBER 6103403, 2000. URL https://uknowledge.uky.edu/physastron_patents/5.
- [44]G. Kresse and J. Furthmüller: Efficient Iterative Schemes for ab initio Total-Energy Calculations Using a Plane-Wave Basis Set. Physical Review B, VOLUME 54, ISSUE 16: 11169, 1996. URL https://link.aps.org/doi/10.1103/PhysRevB.54.11169.DOI
- [45]G. Kresse and D. Joubert: From Ultrasoft Pseudopotentials to the Projector Augmented-Wave Method. Physical Review B, VOLUME 59, ISSUE 3: 1758, 1999. URL https://link.aps.org/doi/10.1103/PhysRevB.59.1758.DOI
- [46]J. P. Perdew, J. A. Chevary, S. H. Vosko, K. A. Jackson, M. R. Pederson, D. J. Singh, and C. Fiolhais: Atoms, Molecules, Solids, and Surfaces: Applications of the Generalized Gradient Approximation for Exchange and Correlation. Physical Review B, VOLUME 46: 6671, 1992. URL https://link.aps.org/doi/10.1103/PhysRevB.46.6671.DOI
- [47]B. Haberl, T. A. Strobel, and J. E. Bradby: Pathways to Exotic Metastable Silicon Allotropes. Applied Physics Reviews, VOLUME 3, ISSUE 4: 040808, 2016. URL https://doi.org/10.1063/1.4962984.
- [48]D. Selli, I. A. Baburin, R. Martoňák: Novel Metastable Metallic and Semiconducting Germaniums. Scientific Reports, VOLUME 3: 1466, 2013. URL https://doi.org/10.1038/srep01466.
- [49]K. Sudoh, M. Naito: Interfacial Reaction During Dewetting of Ultrathin Silicon on Insulator. Comptes Rendus Physique, VOLUME 14, ISSUE 7: 601, 2013. URL https://doi.org/10.1016/j.crhy.2013.06.008.
- [50]Ya-Ping Wang et al.: Large-Gap Quantum Spin Hall State in Functionalized Dumbbell Stanene. Applied Physics Letters, VOLUME 108, ISSUE 7: 073104, 2016. URL https://doi.org/10.1063/1.4942380.
- [51]S. Hara, S. Izumi, T. Kumagai, S. Sakai: Surface Energy, Stress and Structure of Well-Relaxed Amorphous Silicon: A Combination Approach of ab initio and Classical Molecular Dynamics. Surface Science, VOLUME 585, NUMBER 1: 17, 2005. URL https://doi.org/10.1016/j.susc.2005.03.061.
- [52]Haisheng Li et al.: Threadlike Tin Clusters with High Thermal Stability Based on Fundamental Units. The Journal of Physical Chemistry C, VOLUME 116, ISSUE 1: 231, 2012. URL https://doi.org/10.1021/jp208121s.
- [53]Haisheng Li et al.: Tin Clusters Formed by Fundamental Units: A Potential Way to Assemble Tin Nanowires. Physical Chemistry Chemical Physics, VOLUME 15, ISSUE 6: 1831, 2013. URL https://doi.org/10.1039/C2CP42948A.
- [54]F. C. Frank, J. S. Kasper: Complex Alloy Structures Regarded as Sphere Packings. I. Definitions and Basic Principles. Acta Crystallographica, VOLUME 11: 184, 1958. URL https://doi.org/10.1107/S0365110X58000487.
- [55]F. C. Frank, J. S. Kasper: Complex Alloy Structures Regarded as Sphere Packings. II. Analysis and Classification of Representative Structures. Acta Crystallographica, VOLUME 12: 483, 1959. URL https://doi.org/10.1107/S0365110X59001499.
- [56]B. Wehinger et al.: Diffuse Scattering in Metallic Tin Polymorphs. Journal of Physics: Condensed Matter, VOLUME 26, ISSUE 11: 115401, 2014. URL https://iopscience.iop.org/article/10.1088/0953-8984/26/11/115401.
- [57]R. Kubiak: Evidence for the Existence of the γ Form of Tin. Journal of the Less-Common Metals, VOLUME 116, ISSUE 2: 307, 1986. URL https://doi.org/10.1016/0022-5088(86)90663-6.
- [58]G. Bergmann: Upper Critical Field and the Density of States in Amorphous Super Conductors. Physical Review B, VOLUME 7, ISSUE 11: 4850, 1973. URL https://doi.org/10.1007/978-1-4684-2688-5_113.
- [59]K. Knorr, N. Barth: Investigation of Disordered Sn-Films by Superconducting Tunneling. Solid State Communications, VOLUME 6, ISSUE 11: 791, 1968. URL https://doi.org/10.1016/0038-1098(68)90121-X.
- [60]W. Buckel: Superconductivity and Metastable Phases in Thin Films. Journal of Vacuum Science & Technology, VOLUME 10, ISSUE 5: 599, 1973. URL https://doi.org/10.1116/1.1318397.
- [61]M. Vergnat, G. Marchal, and Ph. Mangin: Preparation and Structure of Amorphous Semiconductor Hydrogenated Tin. Applied Physics Letters, VOLUME 57, ISSUE 22: 2300, 1990. URL https://doi.org/10.1063/1.103893.
- [62]L. K. Nanver, G. Weyer, and B. I. Deutch: Experimental Study of the Amorphous Phases of Group-IV Semiconductors by the ¹¹⁹mSn Mössbauer Probe. Zeitschrift für Physik B Condensed Matter, VOLUME 47, ISSUE 2: 103, 1982. URL https://doi.org/10.1007/BF01441292.
- [63]P. Li, W. Fu, P. Zhuang, Y. Cao, C. Tang, A. B. Watson, P. Dong, J. Shen, M. Ye: Amorphous Sn/Crystalline SnS₂ Nanosheets via In Situ Electrochemical Reduction Methodology for Highly Efficient Ambient N₂ Fixation. Small, VOLUME 15, ISSUE 40: 1902535, 2019. URL https://doi.org/10.1002/smll.201902535.
- [64]M. Ryník, S. Leoni, and R. Martoňák: Pressure-Induced Structural Transformation of Clathrate Ge136 via an Ultrafast Recrystallization of an Amorphous Intermediate. Physical Review B, VOLUME 105, ISSUE 13: 134107, 2022. URL https://link.aps.org/doi/10.1103/PhysRevB.105.134107.DOI
- [65]V. V. Brazhkin, A. G. Lyapin, S. V. Popova, and R. N. Voloshin: Nonequilibrium Phase Transitions and Amorphization in Si, Si/GaAs, Ge, and Ge/Gash at the Decompression of High-Pressure Phases. Physical Review B, VOLUME 51, ISSUE 12: 7549, 1995. URL https://link.aps.org/doi/10.1103/PhysRevB.51.7549.DOI
- [66]Liang Xu et al.: Folded Network and Structural Transition in Molten Tin. Nature Communications, VOLUME 13: 126, 2022. URL https://doi.org/10.1038/s41467-021-27742-2.
- [67]P. Biswas, R. Atta-Fynn, and D. A. Drabold: Reverse Monte Carlo Modeling of Amorphous Silicon. Physical Review B, VOLUME 69, ISSUE 19: 195207, 2004. URL https://link.aps.org/doi/10.1103/PhysRevB.69.195207.DOI
- [68]J. Fortner and J. S. Lannin: Radial Distribution Functions of Amorphous Silicon. Physical Review B, VOLUME 39, NUMBER 8: 5527, 1989. URL https://link.aps.org/doi/10.1103/PhysRevB.39.5527.DOI
- [69]E. Guerrero, and D. A. Strubbe: Structural Changes and Void Generation in Low-Density Amorphous Silicon: A Computational Study. arXiv preprint arXiv:1907.01327, 2019. URL https://arxiv.org/abs/1907.01327.
- [70]A. Pedersen, L. Pizzagalli and H. Jónsson: Optimal Atomic Structure of Amorphous Silicon Obtained from Density Functional Theory Calculations. New Journal of Physics, VOLUME 19, NUMBER 6: 063018, 2017. URL https://iopscience.iop.org/article/10.1088/1367-2630/aa732e/pdf.DOI
- [71]R. V. Meidanshahi, S. Bowden and S. M. Goodnick: Electronic Structure and Localized States in Amorphous Si and Hydrogenated Amorphous Si. Physical Chemistry Chemical Physics, VOLUME 21, ISSUE 24: 13248, 2019. URL https://doi.org/10.1039/C9CP01121H.
- [72]I. Stich, R. Car, M. Parrinello: Amorphous Silicon Studied by ab initio Molecular Dynamics: Preparation, Structure, and Properties. Physical Review B, VOLUME 44, NUMBER 20: 11092, 1991. URL https://link.aps.org/doi/10.1103/PhysRevB.44.11092.DOI
- [73]D. Choudhary and P. Clancy: Characterizing the Nature of Virtual Amorphous Silicon. The Journal of Chemical Physics, VOLUME 122, ISSUE 17: 174509, 2005. URL https://link.aps.org/doi/10.1063/1.1888566.DOI
- [74]R. Li, E. Lee, T. Luo: A Unified Deep Neural Network Potential Capable of Predicting Thermal Conductivity of Silicon in Different Phases. Materials Today Physics, VOLUME 12: 100181, 2020. URL https://doi.org/10.1016/j.mtphys.2020.100181.
- [75]H. M. Shodja, M. Tabatabaei and K. Esfarjani: First Principles Molecular Dynamics Studies of Elastic Constants, Ideal Tensile Strength, Chemistry of Crack Initiation, and Surface and Cohesive Energies in Amorphous Silicon. Philosophical Magazine, VOLUME 94, NUMBER 25: 2913, 2014. URL https://doi.org/10.1080/14786435.2014.939735.
- [76]I. Santos, M. Aboy, L. A. Marqués, P. López, L. Pelaz: Generation of Amorphous Si Structurally Compatible with Experimental Samples through the Quenching Process: A Systematic Molecular Dynamics Simulation Study. Journal of Non-Crystalline Solids, VOLUMES 503-504: 20, 2019. URL https://doi.org/10.1016/j.jnoncrysol.2018.09.024.
- [77]A. Pedersen, L. Pizzagalli, and H. Jónsson: Atomic and Electronic Structures of a Vacancy in Amorphous Silicon. Physical Review B, VOLUME 101, ISSUE 5: 054204, 2020. URL https://link.aps.org/doi/10.1103/PhysRevB.101.054204.DOI
- [78]Y. Furukawa and Y. Masushima: First-Principles Prediction of Densities of Amorphous Materials: The Case of Amorphous Silicon. Journal of the Physical Society of Japan, VOLUME 87, NUMBER 2: 024701, 2017. URL https://doi.org/10.48550/arXiv.1704.06107.
- [79]J. S. Custer et al.: Density of Amorphous Si. Applied Physics Letters, VOLUME 64, ISSUE 4: 437, 1994. URL https://doi.org/10.1063/1.111121.
- [80]C. Messmer, J. C. Bilello: The Surface Energy of Si, GaAs, and GaP. Journal of Applied Physics, VOLUME 52, ISSUE 7: 4623, 1981. URL https://doi.org/10.1063/1.329342.
- [81]R. J. Jacobsson: Surface Energy of Germanium and Silicon. Journal of The Electrochemical Society, VOLUME 110, NUMBER 6: 524, 1963. URL https://iopscience.iop.org/article/10.1149/1.2425806.
- [82]J. J. Gilman: Direct Measurements of the Surface Energies of Crystals. Journal of Applied Physics, VOLUME 31, ISSUE 12: 2208, 1960. URL https://doi.org/10.1063/1.1735524.
- [83]A. Mujica, C. J. Pickard, R. J. Needs: Low-Energy Tetrahedral Polymorphs of Carbon, Silicon, and Germanium. Physical Review B, VOLUME 91, ISSUE 21: 214104, 2015. URL https://link.aps.org/doi/10.1103/PhysRevB.91.214104.DOI
- [84]J. Conesa: Computer Modeling of allo-Si and allo-Ge Polymorphs. The Journal of Physical Chemistry B, VOLUME 106, ISSUE 13: 3402, 2002. URL https://doi.org/10.1021/jp014115g.
- [85]Z. Zhao et al.: Tetragonal Allotrope of Group 14 Elements. Journal of the American Chemical Society, VOLUME 134, NUMBER 30: 12362, 2012. URL https://doi.org/10.1021/ja304380p.
- [86]E. Pospíšilová: Search for Stable Clathrate Films within Elements from Column XIV of the Periodic Table (Dissertation Thesis, Comenius University in Bratislava, 2024). https://opac.crzp.sk/?fn=detailBiblioForm&sid=C007B9F4EAC E4D3BE4CB45B8D8B7.
- [87]A. J. Karttunen, D. Usvyat, M. Schütz and L. Maschio: Dispersion Interactions in Silicon Allotropes. Physical Chemistry Chemical Physics, VOLUME 19, ISSUE 11: 7699, 2017. URL https://doi.org/10.1039/C6CP08873B.
- [88]F. Tran, J. Stelzl, P. Blaha: Rungs 1 to 4 of DFT Jacob’s Ladder: Extensive Test on the Lattice Constant, Bulk Modulus, and Cohesive Energy of Solids. The Journal of Chemical Physics, VOLUME 144, ISSUE 20: 204120, 2016. URL S. Grimme, J. Antony, S. Ehrlich, H. Krieg: A Consistent and Accurate ab initio Parametrization of Density Functional Dispersion Correction (DFT-D) for the 94 Elements H-Pu. The Journal of Chemical Physics, VOLUME 132, ISSUE 15: 154104, 2010. URL https://doi.org/10.1063/1.3382344.
- [90]S. Grimme, S. Ehrlich, L. Goerigk: Effect of the Damping Function in Dispersion Corrected Density Functional Theory. Journal of Computational Chemistry, VOLUME 32: 1456, 2011. URL https://doi.org/10.1002/jcc.21759.
- [91]S. Grimme: Density Functional Theory with London Dispersion Corrections. WIREs Computational Molecular Science, VOLUME 1: 211, 2011. URL https://doi.org/10.1002/wcms.30.
- [92]P. Blaha and F. Tran: DFT Approximations: Which One to Use? https://dokumen.tips/documents/dft-approximations-which-one-to-use-p-blaha-and-f-tran.html. Institute of Materials Chemistry, TU Wien, lecture, pg. 8.