betaFeedback

WorksPhysics and Astronomy

Coevolution of Dust Growth and Gravitational Instability in Massive Protostellar Disks

Abstract

Massive protostellar disks are expected to sustain high accretion rates through gravitational instability, while dust growth may modify their opacity, cooling efficiency, and stability. Conversely, the time-dependent and nonaxisymmetric structures produced by gravitational instability may regulate the local conditions for dust growth. However, the coupled evolution of dust growth and gravitational instability in massive protostellar disks has not yet been explored self-consistently. We present two-dimensional hydrodynamic simulations that follow gas dynamics, dust growth, and opacity-dependent radiative cooling in a massive protostellar disk. We find that dust grains rapidly grow to millimeter-centimeter sizes shortly after disk formation, substantially reducing the infrared opacity. The enhanced cooling promotes disk fragmentation and produces more frequent accretion-driven luminosity outbursts than in a model without dust growth, with durations and peak luminosities comparable to those observed in massive protostars. Dust growth is broadly regulated by the fragmentation-limited size in dense disk regions, whereas newly formed outer disk regions and low-density regions deviate from this limit because of finite collision timescales and dust transport. These results suggest that dust growth may facilitate episodic accretion and fragmentation, while gravitationally unstable disk structures in turn regulate the dust growth process.

Introduction

Massive stars exert a profound influence on their surrounding environments through intense radiation of ≳104 L⊙\gtrsim10^{4}\ L_{\odot} and supernova explosions. Understanding how such massive stars form is therefore a fundamental problem (e.g., H. Beuther et al. 2025). Massive protostars emit strong radiation that inhibits further mass accretion onto the protostar. As a consequence, it has long been recognized that spherically symmetric accretion from molecular cloud cores imposes an upper limit on the final stellar mass (∼40 M⊙\sim40\ M_{\odot}) (e.g., [58, 49] (M. G. Wolfire & J. P. Cassinelli 1987)). To mitigate such radiative feedback and enable continued mass supply onto the protostar, the presence of accretion disks around massive protostars has been proposed (e.g., [123, 53, 55, 88, 99]). In recent years, high-angular-resolution observations with the Atacama Large Millimeter/submillimeter

Array (ALMA) have proposed evidence for the presence of rotationally supported disks around massive protostars (e.g., [46, 19, 65, 40, 118, 38, 82, 89, 77]). However, the internal physical structure and evolution of these disks, including the role of dust growth, remain poorly understood.

In this context, the recent polarimetric observation has suggested that dust grains may grow within massive protostellar disks ([39]). Dust growth can significantly modify the disk opacity, thereby strongly affecting the disk emission properties at (sub)millimeter wavelengths ([122]). Such opacity variations introduce systematic uncertainties in disk masses and temperatures inferred from (sub)millimeter observations (e.g., [112]), highlighting the importance of understanding dust growth processes in massive protostellar disks for the proper interpretation of observations. Dust growth may also influence the physical evolution of massive protostellar disks themselves. Because these disks are sufficiently optically thick to thermal radiation, their cooling is primarily regulated by dust thermal emission. In this regime, lower opacity allows thermal radiation to escape more efficiently from the disk interior, thereby enhancing the cooling efficiency. Dust growth therefore reduces the infrared opacity and lowers the disk temperature (R. Yamamuro et al. [121]). This may enhance gravitational instability of the massive protostellar disk. Since gravitational instability is highly sensitive to the thermal state and cooling efficiency of the disk (e.g., C. F. Gammie [37]; P. Cossins et al. [23]; H. Lee et al. [60]), dust growth may substantially alter the development of gravitational instability and the subsequent evolution of massive protostellar disks.

Such effects are particularly important because massive protostellar disks are thought to maintain their high accretion rates through gravitational instability. Massive protostellar disks are expected to achieve their high mass accretion rates of ∼10−4 M⊙ yr−1\sim10^{-4}\ M_\odot\ \mathrm{yr}^{-1} via efficient angular momentum transport induced by gravitational instability. Consequently, nonaxisymmetric spiral structures and disk fragmentation leading to the formation of multiple systems have been suggested from both theoretical and observational perspectives (e.g., K. M. Kratter et al. [52]; M. T. Beltrán et al. [7]; H. Beuther et al. [9]; G. A. Oliva & R. Kuiper [79]). Furthermore, numerical simulations have demonstrated that the infall of fragments onto the central protostar can trigger episodic accretion bursts in massive protostars (e.g., D. M.-A. Meyer et al. [69, 67]; V. G. Elbakyan et al. [33]). Such processes have been proposed as a possible origin of the luminosity outbursts observed in several massive protostars (e.g., A. Caratti o Garatti et al. [17]; I. Zinchenko et al. [125]; T. R. Hunter et al. [43]; K. Sugiyama et al. [97]; R. A. Burns et al. [15]; X. Chen et al. [20]; B. Stecklum et al. [94]).

Dust growth in massive protostellar disks has been investigated theoretically by R. Yamamuro et al. [121, 122] using steady, axisymmetric disk models. These studies showed that dust grains can grow efficiently in gravitationally unstable massive protostellar disks and that the resulting opacity evolution can modify the disk thermal structure and gravitational stability. However, massive protostellar disks are expected to be time-dependent and nonaxisymmetric, because gravitational instability produces spiral arms, clumps, and episodic accretion. In such disks, dust growth and gravitational instability should influence each other: dust growth changes the opacity and cooling rate of the disk, while the evolving disk structure controls the local density, temperature, and collision timescale that regulate dust growth. It therefore remains unclear whether the dust-growth framework developed for steady disks remains applicable to dynamically evolving gravitationally unstable disks. It is also unclear how dust-growth-induced opacity evolution feeds back on disk fragmentation and accretion variability.

The aim of this study is therefore to investigate how dust growth proceeds in nonsteady and nonaxisymmetric massive protostellar disks and to assess its impact on disk evolution. To this end, we perform self-consistent two-dimensional hydrodynamical simulations that follow the coupled evolution of gas and dust. This paper is organized as follows. In § 2, we describe the numerical methods and simulation setup. In Section 3, we present the main results of the coevolution of the disk, central star, and dust in nonaxisymmetric massive protostellar disks. In § 4, we compare the differences in disk evolution with and without dust growth. In § 5, we compare the dust growth in this study with predictions from a 1D steady disk model and show the implications of dust growth for disk gravitational instability.

METHOD

We simulate gas and dust dynamics in a nonaxisymmetric massive protostellar disk using the numerical hydrodynamics code FEOSAD (Formation and Evolution Of Stars and Disks), which solves the two-fluid (gas and dust) hydrodynamic equations in the thin-disk limit. The simulations begin with the gravitational collapse of a prestellar cloud core and follow its evolution through central star and disk formation in polar coordinates (rr, ϕ\phi). An important advantage of the two-dimensional thin-disk approach is that it can capture the effects of gravitational instability and fragmentation, including the formation and evolution of spiral arms and clumps, while allowing for substantially higher numerical resolution at a considerably lower computational cost than full three-dimensional simulations. This makes the 2D thin-disk approximation particularly suitable for following the long-term dynamical evolution of massive protostellar disks and the associated dust evolution. A detailed description of the code is provided in E. I. Vorobyov et al. [106, 109]. Here, we briefly summarize its key features and describe the updates implemented for the present study.

Basic Equations for Gaseous Component

The FEOSAD code considers the coevolution of gas and dust disk systems, treating them as two fluids, with the dust represented as a pressureless fluid. The hydrodynamic equations for the gas, describing the conservation of mass and momentum, are given by

∂Σg∂t+∇⋅(Σgv)=0,(1)\frac{\partial\Sigma_g}{\partial t}+\nabla\cdot(\Sigma_g\boldsymbol{v})=0, \tag*{(1)}
∂∂t(Σgv)+∇⋅(Σgv⊗v)=−∇P+Σgg+∇⋅Π−Σd,grf,(2)\frac{\partial}{\partial t}(\Sigma_g\boldsymbol{v})+\nabla\cdot(\Sigma_g\boldsymbol{v}\otimes\boldsymbol{v})=-\nabla P+\Sigma_g\boldsymbol{g}+\nabla\cdot\boldsymbol{\Pi}-\Sigma_{d,\mathrm{gr}}\boldsymbol{f}, \tag*{(2)}

where Σg\Sigma_g is the gas surface density, Σd,gr\Sigma_{d,\mathrm{gr}} is the surface density of the grown dust component, and f\boldsymbol{f} is the gas–dust drag force per unit grown-dust mass described in next section, while ∇=r^ ∂/∂r+ϕ^ r−1∂/∂ϕ\nabla=\hat{r}\,\partial/\partial r+\hat{\phi}\,r^{-1}\partial/\partial\phi denotes the planar gradient and v=vrr^+vϕϕ^\boldsymbol{v}=v_r\hat{r}+v_\phi\hat{\phi} is the planar gas velocity. The vertically integrated pressure is given by P=(γ−1)eP=(\gamma-1)e with γ=7/5\gamma=7/5 and internal energy per unit surface area ee. The gravitational acceleration g=grr^+gϕϕ^\boldsymbol{g}=g_r\hat{r}+g_\phi\hat{\phi} includes the self-gravity of the gas and dust disk components obtained from the integral form of the Poisson equation (E. I. Vorobyov et al. [113]) together with the gravity of the central protostar once it forms. The viscous stress tensor Π\boldsymbol{\Pi} follows the formulation of E. I. Vorobyov & S. Basu [108]. We parameterize the magnitude of kinematic viscosity ν=αcsHg\nu=\alpha c_sH_g using the alpha prescription of N. I. Shakura & R. A. Sunyaev [93], where csc_s is the sound speed of gas and HgH_g is the gas vertical scale height (E. I. Vorobyov & S. Basu [107]). The α\alpha is set to a spatially and temporally constant value. Massive protostellar disks are expected to exhibit strong turbulence in addition to gravitational torques in order to sustain their high mass accretion rates. We therefore adopt α=10−2\alpha=10^{-2}, following the assumption of previous study (R. Yamamuro et al. [121]).

The energy balance equation, including viscous accretion heating and compressional heating, is written as

∂e∂t+∇⋅(ev)=−P(∇⋅v)−Λ+Γ+(∇v):Π,(3)\frac{\partial e}{\partial t}+\nabla\cdot(e\boldsymbol{v})=-P(\nabla\cdot\boldsymbol{v})-\Lambda+\Gamma+(\nabla\boldsymbol{v}):\boldsymbol{\Pi}, \tag*{(3)}

where Λ\Lambda and Γ\Gamma denote the cooling and heating terms, respectively. These terms account for disk blackbody cooling and for heating due to stellar and background irradiation, following the analytical solution to the vertical radiative transfer equation by R. Dong et al. [27]; Y. N. Pavlyuchenkov et al. [84]. The cooling term is given by

Λ=8σSBT42+32τR+1τP,(4)\Lambda=\frac{8\sigma_{\mathrm{SB}}T^4}{2+\frac{3}{2}\tau_R+\frac{1}{\tau_P}}, \tag*{(4)}

where T=(γ−1)eμ/RΣgasT=(\gamma-1)e\mu/\mathcal{R}\Sigma_{\mathrm{gas}} is the midplane temperature, μ=2.33\mu=2.33 is the mean molecular weight, R\mathcal{R} is the universal gas constant, and σSB\sigma_{\mathrm{SB}} is the Stefan–Boltzmann constant. The Rosseland and Planck optical depths to the disk midplane are defined as τR=κRΣd,tot/2\tau_R=\kappa_R\Sigma_{d,\mathrm{tot}}/2 and τP=κPΣd,tot/2\tau_P=\kappa_P\Sigma_{d,\mathrm{tot}}/2, where Σd,tot\Sigma_{d,\mathrm{tot}} is the total dust surface density.

Basic Equations for Dusty Components

The corresponding mean opacities κR\kappa_R and κP\kappa_P depend on the maximum grain radius amax⁡a_{\max} (see § 2.3). The heating term per unit surface area of the disk is expressed as

Γ=8σSBTirr42+32τR+1τP,(5)\Gamma=\frac{8\sigma_{\mathrm{SB}}T_{\mathrm{irr}}^4}{2+\frac{3}{2}\tau_R+\frac{1}{\tau_P}}, \tag*{(5)}

where TirrT_{\mathrm{irr}} is the irradiation temperature at the disk surface determined by the stellar and background irradiation as

Tirr4=Tbg4+FirrσSB,(6)T_{\mathrm{irr}}^4=T_{\mathrm{bg}}^4+\frac{F_{\mathrm{irr}}}{\sigma_{\mathrm{SB}}}, \tag*{(6)}

where TbgT_{\mathrm{bg}} is background temperature set to 10K, Firr(r)F_{\mathrm{irr}}(r) is the radiation flux absorbed by the disk surface at radial distance rr, given by

Firr(r)=L∗4πr2cos⁡γirr,(7)F_{\mathrm{irr}}(r)=\frac{L_*}{4\pi r^2}\cos\gamma_{\mathrm{irr}}, \tag*{(7)}

where γirr\gamma_{\mathrm{irr}} is the incidence angle at rr described in E. I. Vorobyov & S. Basu [108]. The stellar luminosity L∗L_* is the sum of the accretion luminosity and the stellar intrinsic luminosity. We evaluate the stellar intrinsic luminosity from pre-calculated stellar evolutionary tracks derived from T. Hosokawa & K. Omukai [42] as a function of the stellar mass and accretion rate. Here, we use the time-averaged accretion rates for the previous 1 yr because it fluctuates significantly in each time steps.

The dust in our model consists of two components. The small dust component has grain radius between amin⁡=5×10−3 μma_{\min}=5\times10^{-3}\,\mu\mathrm{m} and a∗=1 μma_*=1\,\mu\mathrm{m}, while the grown dust component has radius from a∗a_* up to a maximum grain radius amax⁡a_{\max}, which varies in space and time. Initially, the prestellar core contains only small grains with amax⁡=a∗a_{\max}=a_*. As the disk forms and evolves, small grains can grow and transition into the grown dust component. Both small and grown dust follow a power-law size distribution,

N(a)=C⋅a−q,(8)N(a)=C\cdot a^{-q}, \tag*{(8)}

where N(a)N(a) is the surface number density of grains per unit grain radius aa and q=3.5q=3.5 is the power-law index of the dust-size distribution. Following the classical theory of fragmentation cascades ([24, 11]), we adopt q=3.5q=3.5 for simplicity. CC is a normalization constant determined by

∫amin⁡amax⁡md(a)⋅N(a) da=Σd,sm+Σd,gr,(9)\int_{a_{\min}}^{a_{\max}}m_d(a)\cdot N(a)\,da=\Sigma_{d,\mathrm{sm}}+\Sigma_{d,\mathrm{gr}}, \tag*{(9)}

where md(a)m_{\mathrm{d}}(a) is the mass of an individual grain with radius aa and Σd,sm\Sigma_{\mathrm{d,sm}} is the surface density of small dust. The continuity and momentum conservation equations for small and grown dust are given by

∂Σd,sm∂t+∇⋅(Σd,smv)=−S(amax⁡),(10)\frac{\partial\Sigma_{\mathrm{d,sm}}}{\partial t}+\nabla\cdot\left(\Sigma_{\mathrm{d,sm}}\boldsymbol{v}\right)=-S(a_{\max}), \tag*{(10)}
∂Σd,gr∂t+∇⋅(Σd,gru)=S(amax⁡),(11)\frac{\partial\Sigma_{\mathrm{d,gr}}}{\partial t}+\nabla\cdot\left(\Sigma_{\mathrm{d,gr}}\boldsymbol{u}\right)=S(a_{\max}), \tag*{(11)}
∂∂t(Σd,gru)+∇⋅(Σd,gru⊗u)=Σd,grg+Σd,grf+S(amax⁡)v,(12)\frac{\partial}{\partial t}\left(\Sigma_{\mathrm{d,gr}}\boldsymbol{u}\right)+\nabla\cdot\left(\Sigma_{\mathrm{d,gr}}\boldsymbol{u}\otimes\boldsymbol{u}\right)=\Sigma_{\mathrm{d,gr}}\boldsymbol{g}+\Sigma_{\mathrm{d,gr}}\boldsymbol{f}+S(a_{\max})\boldsymbol{v}, \tag*{(12)}

where Σd,sm\Sigma_{\mathrm{d,sm}} is assumed to be perfectly coupled to the gas and thus shares the gas velocity v\boldsymbol{v}, while u=urr^+uϕϕ^\boldsymbol{u}=u_r\hat{\boldsymbol{r}}+u_\phi\hat{\boldsymbol{\phi}} is the planar velocity of grown dust. The term f\boldsymbol{f} represents the drag force per unit mass of grown dust due to interaction with the gas and is defined as

f=12mdCDρg(v−u)∣v−u∣,(13)\boldsymbol{f}=\frac{1}{2m_{\mathrm{d}}}C_{\mathrm{D}}\rho_{\mathrm{g}}(\boldsymbol{v}-\boldsymbol{u})\lvert\boldsymbol{v}-\boldsymbol{u}\rvert, \tag*{(13)}

where σ=πamax⁡2\sigma=\pi a_{\max}^{2} is the cross-section of dust grains, ρg\rho_{\mathrm{g}} is the gas volume density, and CDC_{\mathrm{D}} is the dimensionless friction coefficient. The functional form of CDC_{\mathrm{D}} is taken from C. B. Henderson [41] and is described in detail in O. P. Stoyanovskaya et al. [96] and E. I. Vorobyov et al. [109]. Using the Henderson friction coefficient allows the drag force to be treated self-consistently in both the Epstein and Stokes regimes, reproducing effects such as the sonic boom and avoiding discontinuities, which may occur in the more commonly used drag coefficient of S. J. Weidenschilling [114]. The stopping time associated with the Henderson drag is defined as

tstop=83aρsρgCD∣v−u∣,(14)t_{\mathrm{stop}}=\frac{8}{3}\frac{a\rho_{\mathrm{s}}}{\rho_{\mathrm{g}}C_{\mathrm{D}}\lvert\boldsymbol{v}-\boldsymbol{u}\rvert}, \tag*{(14)}

where ρs=1.68 g cm−3\rho_{\mathrm{s}}=1.68\ \mathrm{g\ cm}^{-3} is the internal density of dust grains (T. Birnstiel et al. [12]). In calculating both the drag coefficient and the stopping time, we adopt amax⁡a_{\max} as the characteristic grain radius. Since the grain-size distribution follows a power law with q=3.5q=3.5, the dust surface density is dominated by the largest grains (T. Sato et al. [91]). Therefore, we track the dynamics of the grains that carry most of the dust mass. The term S(amax⁡)S(a_{\max}) in the dust equations represents the conversion rate between the small and grown dust components. The dust grain distribution for both components is assumed to follow the power-law form given in Equation (8), and the grain-size distribution is taken to be continuous at a∗a_*. Our scheme ensures this continuity by defining the conversion rate from small to grown dust accordingly (see E. I. Vorobyov et al. [109]). The conversion rate S(amax⁡)S(a_{\max}) depends only on the local maximum grain radius amax⁡a_{\max}, as amin⁡a_{\min} and a∗a_* are fixed in our model.

At the beginning of the prestellar cloud core collapse, all grains belong to the small dust component with amax⁡=a∗a_{\max}=a_*. During the subsequent disk formation and evolution, the high-density disk environment facilitates frequent dust-dust collisions, leading to an increase in the maximum grain radius amax⁡a_{\max}. In our model, the evolution of amax⁡a_{\max} within a numerical cell occurs due to collisional growth or fragmentation, as well as advection of dust through the cell. The dynamical evolution of amax⁡a_{\max} is described by

∂amax⁡∂t+(u⋅∇)amax⁡=ξfragD,(15)\frac{\partial a_{\max}}{\partial t}+(\boldsymbol{u}\cdot\nabla)a_{\max}=\xi_{\mathrm{frag}}\mathcal{D}, \tag*{(15)}

where the collisional growth rate D\mathcal{D} is computed in the monodisperse approximation (T. Birnstiel et al. [10]),

D=ρdurelρs,(16)\mathcal{D}=\frac{\rho_{\mathrm{d}}u_{\mathrm{rel}}}{\rho_{\mathrm{s}}}, \tag*{(16)}

here, ρd=Σd,tot/2πHd\rho_{\mathrm{d}}=\Sigma_{\mathrm{d,tot}}/\sqrt{2\pi}H_{\mathrm{d}} is the total dust volume density, where the dust scale height HdH_{\mathrm{d}} is taken into account through dust settling (K. Kornet et al. [51]). The relative collision velocity is defined as urel=uturb2+uth2u_{\mathrm{rel}}=\sqrt{u_{\mathrm{turb}}^{2}+u_{\mathrm{th}}^{2}}, where uturbu_{\mathrm{turb}} and uthu_{\mathrm{th}} represent the turbulence-induced and Brownian-motion components, respectively. The collisional velocity induced by turbulence is derived using the analytical expression of C. W. Ormel & J. N. Cuzzi [80],

uturb=3αcs2St+St−1,(17)u_{\mathrm{turb}}=\sqrt{\frac{3\alpha c_{\mathrm{s}}^{2}}{\mathrm{St}+\mathrm{St}^{-1}}}, \tag*{(17)}

where St\mathrm{St} is the Stokes number, defined as

St=tstopΩK,(18)\mathrm{St}=t_{\mathrm{stop}}\Omega_{\mathrm{K}}, \tag*{(18)}

where ΩK\Omega_{\mathrm{K}} is the Keplerian angular velocity and the stopping time tstopt_{\mathrm{stop}} is calculated for the representative grain radius amax⁡a_{\max}, see Equation (14). Therefore, the relative collision velocity due to turbulence uturbu_{\mathrm{turb}} is also evaluated for grains of representative radius amax⁡a_{\max}. The thermal velocity due to the Brownian motion is calculated as

uth=16kBTπmd,(19)u_{\mathrm{th}}=\sqrt{\frac{16k_{\mathrm{B}}T}{\pi m_{\mathrm{d}}}}, \tag*{(19)}

where kBk_{\mathrm{B}} is the Boltzmann constant and the mass of dust grain mdm_{\mathrm{d}} is also calculated for the representative grain radius amax⁡a_{\max}. We note that uthu_{\mathrm{th}} is usually much smaller than uturbu_{\mathrm{turb}} and dust growth due to the Brownian motion becomes important only for amax⁡≃a∗a_{\max}\simeq a_*. Next, we adopt the following form for the fragmentation term,

ξfrag=min⁡(1,−ln⁡(urel/ufrag)ln⁡5),(20)\xi_{\mathrm{frag}}=\min\left(1,-\frac{\ln\left(u_{\mathrm{rel}}/u_{\mathrm{frag}}\right)}{\ln5}\right), \tag*{(20)}

where ufragu_{\mathrm{frag}} is the fragmentation velocity, which we set ufrag=10 m s−1u_{\mathrm{frag}} = 10\ \mathrm{m\ s}^{-1} in this study, following R. Yamamuro et al. [121, 122]. If the collisional velocity exceeds this threshold, net erosion of the largest grains occurs (S. Okuzumi et al. [75]), leading to a decrease in amax⁡a_{\max}. In the conventional FEOSAD framework, when the relative velocity of dust grains exceeds the fragmentation threshold, the maximum grain radius is instantaneously reset to the fragmentation-limited value (e.g., E. I. Vorobyov et al. [106]). However, collisional fragmentation is fundamentally a process that occurs only when actual collisions between dust grains take place. Using Equation (15), the typical timescale for such collisions can be expressed as

tcoll=amax⁡D=ρsamax⁡ρdurel.(21)t_{\mathrm{coll}} = \frac{a_{\max}}{\mathcal{D}} = \frac{\rho_{\mathrm{s}}a_{\max}}{\rho_{\mathrm{d}}u_{\mathrm{rel}}}. \tag*{(21)}

Since this collision timescale often exceeds the local Keplerian timescale ([14, 91]), we introduce a source term, ξfrag\xi_{\mathrm{frag}}, to account for mass loss due to fragmentation in a manner consistent with the finite collision timescale. We also note that dust fragmentation in our simplified model replenishes dust populations of all sizes down to amin⁡a_{\min}, while keeping the power index fixed.

Dust Opacity

In circumstellar disk environments, dust grains can grow by several orders of magnitude from their initial interstellar sizes of approximately micrometers ([115]). Such rapid growth reduces the dust opacity at infrared wavelengths. As a result, the cooling efficiency of the disk increases, leading to a lower disk temperature.

To account for these changes, we employ the publicly available code Optool (C. Dominik et al. [26]) to compute the Rosseland and Planck mean opacities of dust. This code generates opacities based on the input parameters of dust structure, size distribution, and composition. In this study, we assume that the dust grains are spherical and compact, and the dust-size distribution follows q=3.5q = 3.5. The dust opacities per unit dust mass are then computed accordingly. The dust composition is taken to be the ice-rich mixture adopted in the DSHARP project (T. Birnstiel et al. [12]). Using this tool, we obtain the Rosseland mean opacity

1κR(amax⁡,T)=∫0∞(κν,abs+κν,scaeff)−1∂Bν(T)∂T dν∫0∞∂Bν(T)∂T dν.(22)\frac{1}{\kappa_{\mathrm{R}}(a_{\max}, T)} = \frac{\int_{0}^{\infty}\left(\kappa_{\nu,\mathrm{abs}}+\kappa_{\nu,\mathrm{sca}}^{\mathrm{eff}}\right)^{-1}\frac{\partial B_{\nu}(T)}{\partial T}\,\mathrm{d}\nu}{\int_{0}^{\infty}\frac{\partial B_{\nu}(T)}{\partial T}\,\mathrm{d}\nu}. \tag*{(22)}

and the Planck mean opacity

κP(amax⁡,T)=∫0∞κν,absBν(T) dν∫0∞Bν(T) dν,(23)\kappa_{\mathrm{P}}(a_{\max}, T) = \frac{\int_{0}^{\infty}\kappa_{\nu,\mathrm{abs}}B_{\nu}(T)\,\mathrm{d}\nu}{\int_{0}^{\infty}B_{\nu}(T)\,\mathrm{d}\nu}, \tag*{(23)}

where κν,abs\kappa_{\nu,\mathrm{abs}}, κν,scaeff\kappa_{\nu,\mathrm{sca}}^{\mathrm{eff}}, and BνB_{\nu} are the monochromatic absorption and effective scattering opacities at frequency ν\nu, and the Planck function, respectively.

To demonstrate the effect of dust growth on opacity, we show in Figure 1 the Rosseland and Planck mean opacities as a function of temperature for maximum grain radii of 1 μm1\ \mu\mathrm{m}, 100 μm100\ \mu\mathrm{m}, and 1 cm1\ \mathrm{cm}. Both the Rosseland and Planck mean opacities generally increase with temperature. While smaller grains typically produce higher opacity, this trend reverses over certain temperature ranges. This reversal is related to the wavelength at which the Planck function BνB_{\nu} peaks for a given temperature TT, corresponding to the wavelength at which the thermal emission peaks, λpeak=10 (300 K/T) μm\lambda_{\mathrm{peak}} = 10\ (300\ \mathrm{K}/T)\ \mu\mathrm{m}, relative to the maximum grain radius. When λpeak<2πamax⁡\lambda_{\mathrm{peak}} < 2\pi a_{\max}, grains enter the efficient absorption and scattering regime at the wavelengths dominating the thermal emission.

Rosseland and Planck mean opacities as functions of temperature for three maximum grain radii

Figure 1. The Rosseland mean opacity κR\kappa_{\mathrm{R}} (solid lines) and Planck mean opacity κP\kappa_{\mathrm{P}} (dashed lines) per dust mass as a function of temperature at the maximum grain radius of 1 μ\mum, 100 μ\mum, and 1 cm (deep blue, blue, and light blue lines respectively).

As a result, in the temperature range 1010–100 K100\ \mathrm{K} (λpeak∼30\lambda_{\mathrm{peak}} \sim30–300 μm300\ \mu\mathrm{m}), dust with amax⁡=100 μma_{\max} = 100\ \mu\mathrm{m} or 1 cm1\ \mathrm{cm} exhibits higher opacity than dust with amax⁡=1 μma_{\max} = 1\ \mu\mathrm{m}. However, at temperatures above ∼100 K\sim100\ \mathrm{K}, which characterize most of the disk regions analyzed in this study, the opacity decreases with increasing grain size. In this regime, even relatively small grains efficiently absorb and scatter radiation at the wavelengths contributing most to the mean opacity, and larger grains provide a smaller opacity per unit mass.

In the temperature range 300300–1000 K1000\ \mathrm{K}, the opacity increases more gradually for all grain radius, which can be attributed to the silicate feature around 10 μm10\ \mu\mathrm{m} included in the adopted water-ice dust mixture (e.g., B. T. Draine [28]). At temperatures above ∼1000 K\sim1000\ \mathrm{K}, λpeak\lambda_{\mathrm{peak}} shifts to wavelengths shorter than ∼3 μm\sim3\ \mu\mathrm{m}. Consequently, the peak of the thermal emission shifts into a wavelength regime where the dust opacity rises toward shorter wavelengths. As a result, the Rosseland mean opacity increases, and this trend dominates over the opacity structure associated with the 10 μm10\ \mu\mathrm{m} silicate feature.

Note that massive protostellar disks are sufficiently warm that ice-free dust would in principle be more appropriate in the innermost regions. However, the ice-free region is expected to be limited to radii of order ∼100 au\sim100\ \mathrm{au}, whereas our computational domain extends to ∼0.1 pc\sim0.1\ \mathrm{pc}. Moreover, ice-free dust exhibits strong silicate features that introduce a sharp opacity increase around 10 μ\mum. To isolate the impact of dust-growth-driven opacity variations on disk evolution, we therefore adopt water-ice dust throughout the calculation. Consistent with this simplification, we also neglect additional processes such as the evaporation of volatile species, complete dust sublimation, and changes in the gas opacity caused by molecular dissociation and ionization.

Initial and Boundary Conditions

We start the simulation from a pre-stellar cloud core and make it gravitationally unstable to trigger collapse. The initial cloud profiles have a plateau with axisymmetric uniform gas surface density and angular velocity (E. I. Vorobyov & S. Basu [108])

Σg=Σ01+(r/r0)2,(24)\Sigma_{\mathrm{g}} = \frac{\Sigma_0}{\sqrt{1+(r/r_0)^2}}, \tag*{(24)}
Ω=2Ω0(r0r)2[1+(rr0)2−1],(25)\Omega= 2\Omega_0\left(\frac{r_0}{r}\right)^2\left[\sqrt{1+\left(\frac{r}{r_0}\right)^2}-1\right], \tag*{(25)}

where Σ0\Sigma_0 is the gas surface density at the plateau, Ω0\Omega_0 is the angular velocity at the plateau, and r0r_0 is the plateau radius. This profile emerges when an axisymmetric cloud collapses under its own gravity while conserving angular momentum (S. Basu [5]). The plateau radius r0r_0 is proportional to the Jeans length

r0=Acs,0πGρ0,(26)r_0 = A\frac{c_{\mathrm{s},0}}{\sqrt{\pi G\rho_0}}, \tag*{(26)}

where AA is a constant parameter, cs,0c_{\mathrm{s},0} is the initial sound speed, GG is the gravitational constant, and ρ0\rho_0 is the initial mass density. The initial cloud has a total mass of Mcloud=30 M⊙M_{\mathrm{cloud}} = 30\,M_\odot with a plateau radius r0=3.9×103r_0 = 3.9 \times10^3 au and surface density Σ0=0.4 g cm−2\Sigma_0 = 0.4\ {\rm g\,cm^{-2}}. The surface density is set such that the mass infall rate onto the central star plus disk system, estimated from Mcore/tffM_{\mathrm{core}}/t_{\mathrm{ff}} with the free-fall time tff=3π/32Gρ0≈25t_{\mathrm{ff}} = \sqrt{3\pi/32G\rho_0} \approx25 kyr, is ∼5×10−4 M⊙ yr−1\sim5 \times10^{-4}\,M_\odot\,{\rm yr}^{-1}, which is comparable to typical accretion rates inferred for massive protostars ([66, 42]). The ratio of rotational to gravitational energies is 0.4%, the rotational velocity at the plateau radius is r0Ω0=2.2 km s−1r_0\Omega_0 = 2.2\ {\rm km\,s^{-1}}, and the initial temperature is Tbg=10T_{\mathrm{bg}} = 10 K. All dust is initially in the small dust component with amax⁡=a∗a_{\max} = a_\ast, and the dust-to-gas mass ratio is set to ξd2g=0.01\xi_{\mathrm{d2g}} = 0.01.

The hydrodynamic equations are solved on the polar grid (r,ϕ)(r,\phi) using the method of finite volumes described in the ZEUS code (J. M. Stone & M. L. Norman [95]). The hydrodynamic quantities are advected using a third-order piecewise parabolic scheme of P. Colella & P. R. Woodward [21], ensuring low numerical diffusion. The computational domain extends from 5 au to 3×1043 \times10^4 au and the number of grid cells is 512 ×\times 512. The grid is logarithmically spaced in the radial direction and equidistantly spaced along the azimuthal coordinate, which corresponds to a numerical resolution of 0.1 au near the inner computational boundary and 1.7 au at r=100r = 100 au. To quantitatively justify the spatial resolution, we define the Jeans length estimated from the azimuthally averaged surface density and sound speed as RJ=cs,ave2/πGΣg,aveR_{\mathrm{J}} = c_{\mathrm{s,ave}}^2/\pi G\Sigma_{\mathrm{g,ave}} (E. I. Vorobyov [105]). With this definition, the spatial resolution satisfies the Truelove criterion, resolving the Jeans length by more than four grid cells throughout the region in the immediate vicinity of dense clumps at both t=40t = 40 and 150 kyr in Section 3 (J. K. Truelove et al. [102]).

As the cloud core contracts gravitationally, it spins up and a centrifugal disk forms when the in-spiralling gas and dust hit the centrifugal barrier near the inner computational boundary. Subsequently, the disk grows in size and mass owing to infall from the cloud, which occurs at the disk’s outer edge in our model, typical of flared disks (see [104]), while the central star gains mass via accretion through the inner computational boundary. The latter is placed at 5 au and the regions interior to 5 au are replaced with a sink cell. Instead of the standard one-way open boundary condition at the inner boundary, which allows matter to flow through the disk–sink interface toward the star but prohibits the flow in the opposite direction, we employ a more sophisticated scheme, in which matter is allowed to travel both ways across the sink-disk interface. The details of this boundary condition can be found in E. I. Vorobyov et al. [106], with comparison against the one-way boundary condition in R. Matsukoba et al. [64]. Our updated boundary condition provides a compensating flow of matter from the sink to the disk and mitigates the problem of a sharp drop in density that may occur when the one-way boundary condition is applied. This bidirectional flow does not violate the total mass conservation of the star-disk-envelope system. It also has a physical motivation, as it may partially account for local outward mass transport associated with angular-momentum redistribution in gravitationally unstable disks during disk accretion, which would otherwise be artificially suppressed by a one-way sink boundary. The outer boundary condition is the standard one-way outflow, in which matter is allowed to flow out of the computational domain but not allowed to flow in. Since the outer boundary is placed far away from the disk, it has no effect on the disk dynamics and merely serves to prevent matter from external environment to flow into the computational domain.

Evolution of a nonaxisymmetric massive protostellar disk with dust growth

In this section, we present the results of disk evolution and dust growth in a massive protostellar disk. We first show the spatial distributions of the main disk quantities in § 3.1. We then describe the time evolution of the stellar and disk properties in § 3.2. In § 3.3, we present the radial distributions of the main gas properties for a quantitative evaluation of disk evolution. Finally, § 3.4 provides a quantitative analysis of dust growth.

Snapshots of Disk Evolution

We present the spatial distributions of the main disk quantities to provide an overview of the disk evolution. Figure 2 shows the snapshots of the primary physical quantities within the inner 600×600600 \times600 au region at two epochs t=40t = 40 and 150150 kyr. These snapshots represent different evolutionary stages. The former corresponds to the early disk-formation phase, whereas the latter corresponds to a later stage of the main accretion phase, by which point the central star has already become a massive protostar, reaching roughly half of the total system mass (16M⊙16M_\odot; see the solid blue line in panel (a) of Figure 3).

Snapshots of the gas surface density, Toomre's Q, temperature, maximum grain radius, and total dust surface density

Figure 2. Snapshots of the gas surface density, Toomre’s QQ, temperature, maximum grain radius, and total dust surface density at t=40t = 40 and 150 kyr150\,\mathrm{kyr}, in the inner 600×600 au2600 \times600\,\mathrm{au}^{2} box for the model with dust growth. The white contours in panels (a.1) and (a.2) indicate the boundary of the disk region.

Time evolution of the physical properties of the central star and disk

Figure 3. Time evolution of the physical properties of the central star and disk: (a) stellar mass, (b) the gas accretion rate to the central star averaged over 1 kyr, (c) the total and intrinsic stellar luminosities and the total luminosity averaged over 1 kyr, and (d) the mean disk radius.

We define the disk region based on the centrifugal radius. At a distance rr, the centrifugal radius is calculated from the gas azimuthal velocity vϕv_\phi and the total enclosed mass within rr, which includes the central star and the gas mass, Mstar+Mcum(r)M_{\rm star} + M_{\rm cum}(r), as

rcent=G(Mstar+Mcum(r))vϕ2.(27)r_{\rm cent} = \frac{G(M_{\rm star} + M_{\rm cum}(r))}{v_\phi^2}. \tag*{(27)}

For each azimuthal angle on the computational grid, the disk region is identified as the contiguous set of cells extending outward from the sink cell that satisfy the condition rcent/r<γcentr_{\rm cent}/r < \gamma_{\rm cent} ([48]). We adopt a threshold value of γcent=1.5\gamma_{\rm cent} = 1.5 throughout this study. To further constrain the disk radius, we impose a lower limit on the gas surface density, requiring Σg>Σ0=0.4 g cm−2\Sigma_{\rm g} > \Sigma_0 = 0.4\ {\rm g\,cm}^{-2}, corresponding to the initial molecular cloud core.

Panel (a.1) of Figure 2 shows the gas surface density at t=40 kyrt = 40\ {\rm kyr}, shortly after disk formation at t=37 kyrt = 37\ {\rm kyr}. At this epoch, spiral arms are already formed, and the disk radius is ∼40 au\sim40\ {\rm au}. The disk radius is indicated by the white contour, which corresponds to a threshold density. As accretion from the envelope continues, the disk expands. Panel (a.2) illustrates the development of nonaxisymmetric structures, such as spiral arms and clumps. At this stage, the disk radius reaches ∼300 au\sim300\ {\rm au}, although the presence of gap regions associated with disk fragmentation leads to strong azimuthal variations, with the disk radius decreasing to ∼100 au\sim100\ {\rm au} in some directions.

To investigate the origin of these structures, we examine Toomre’s QQ parameter ([101]), defined as

Q=c~sΩπG(Σg+Σd,tot),(28)Q = \frac{\tilde{c}_{\rm s}\Omega}{\pi G(\Sigma_{\rm g} + \Sigma_{\rm d,tot})}, \tag*{(28)}

where c~s=cs/1+ξϵdg\tilde{c}_{\rm s} = c_{\rm s}/\sqrt{1 + \xi\epsilon_{\rm dg}} is the modified sound speed ([106]) in the presence of dust, Ω\Omega is the angular velocity of gas. As shown in Panels (b.1)–(b.2), the spiral-arm and clump regions correspond to Q≲1.4Q \lesssim1.4, indicating that these structures arise from the gravitational instability ([30]).

Panels (c.1)–(c.2) show the disk temperature structure. The heating sources are radiative heating from the central star, viscous accretion heating, and compressional heating due to disk self-gravity. At both epochs, temperature enhancements are found within spiral arms at radii ≲50 au\lesssim50\,{\rm au}. At t=150 kyrt = 150\,{\rm kyr}, additional localized enhancements appear within clumps, where the temperature reaches up to ∼1000K\sim1000{\rm K}. These regions coincide with the spiral arms and clumps shown in panels (a.1) and (a.2), indicating that the temperature increase is caused by viscous accretion heating and, mainly, by compressional heating associated with self-gravity. As the stellar mass and luminosity increase (solid blue lines in panels (a) and (c) of Figure 3), radiative heating strengthens, leading to a corresponding increase in temperature from panels (c.1) to (c.2). Based on the increase in luminosity, the temperature is expected to rise by more than a factor of ∼3\sim3 in regions where radiative heating dominates.

Panels (d.1)–(d.2) show the distribution of the maximum grain radius. The maximum grain radius reaches ∼103\sim10^{3}–104 μm10^{4}\,\mu\mathrm{m} within ∼20 au\sim20\,\mathrm{au} at the early disk-formation stage (t=40 kyrt = 40\,\mathrm{kyr}). As the disk expands, the region where grains grow gradually widens, and eventually grains reach radii of ∼104 μm\sim10^{4}\,\mu\mathrm{m} throughout most of the inner 300 au300\,\mathrm{au}. This is related to efficient collisional dust growth in dense spiral arms and clumps, from which grown dust grains leak out into the surrounding low-density regions (see § 3.4 for details).

Panels (e.1)–(e.2) display the total dust surface density structure. The dust surface density generally follows the behavior of the gas disk over most regions. Although dust growth could, in principle, produce structures arising from dust–gas decoupling [117, 1, 106, 64], no such features appear in our calculations. Within ≲40 au\lesssim40\,\mathrm{au} at t=40 kyrt = 40\,\mathrm{kyr} and in both the inner disk (≲60 au\lesssim60\,\mathrm{au}) and the outer dense spiral-arm and clump regions (≳60 au\gtrsim60\,\mathrm{au}) at t=150 kyrt = 150\,\mathrm{kyr}, the Stokes number remains St≲10−3\mathrm{St} \lesssim10^{-3}, indicating tight dust–gas coupling. In the low-density regions beyond ≳60 au\gtrsim60\,\mathrm{au} at t=150 kyrt = 150\,\mathrm{kyr}, however, grown dust leaks out of the dense spiral arms and clumps, as shown in panel (d.2). Since the Stokes number is inversely proportional to the local gas surface density (Equation (18)), St approaches unity in these regions, leading to partial dust–gas decoupling and dust depletion. Although dust can decouple from the gas in the low-density regions, the dust density there is sufficiently low that the resulting dust drift has little effect on the dust-to-gas ratio in the nearby spiral arms and clumps.

Time Evolution of the Protostar–Disk System

We describe the time evolution of the system using Figure 3, which illustrates the temporal evolution of the central star and the disk. As described in § 2.4, the free-fall time estimated from the initial core conditions is approximately 25 kyr25\,\mathrm{kyr}. In the simulation, the central star forms at a comparable epoch of t=26 kyrt = 26\,\mathrm{kyr}. After its formation, the central star continuously gains mass, as shown by the solid line in panel (a), until t=150 kyrt = 150\,\mathrm{kyr}, reaching 16 M⊙16\,M_{\odot} and thus exceeding half of the total system mass. This indicates that most of the envelope material has already accreted and that the gas supply to the star begins to decline. As a result, the

rate of stellar mass growth gradually slows after this epoch.

This trend is also reflected in the time evolution of the mass accretion rate. To better illustrate the long-term evolution of stellar mass growth, panel (b) shows the accretion rate onto the central star averaged over 1 kyr. Between t=26t = 26 kyr and t=150t = 150 kyr, the accretion rate fluctuates around M˙gas∼10−4 M⊙ yr−1\dot{M}_{\mathrm{gas}} \sim10^{-4}\,M_{\odot}\,\mathrm{yr}^{-1}. During this period, the disk is gravitationally unstable and episodic accretion bursts are triggered by inward migration of gravitationally bound clumps [69]. This leads to strong variability in the accretion rate, which can reach values as high as ∼3×10−3 M⊙ yr−1\sim3 \times10^{-3}\,M_{\odot}\,\mathrm{yr}^{-1}. After t=150t = 150 kyr, the accretion rate gradually declines.

Panel (c) shows the evolution of the stellar luminosity. The total stellar luminosity (light solid line) consists of two components: the intrinsic stellar luminosity (dashed line) and the accretion luminosity generated by mass infall onto the central star. To better illustrate the long-term evolution of stellar luminosity, the total stellar luminosity averaged over 1 kyr is shown as a thick solid line. At early stages, when the stellar mass is still below the massive protostellar threshold (<8 M⊙< 8\,M_{\odot}), the average total luminosity is dominated by accretion luminosity, reaching ∼102\sim10^{2}–103 L⊙10^{3}\,L_{\odot}. Around t∼80t \sim80 kyr, when the stellar mass reaches ∼8 M⊙\sim8\,M_{\odot} and the system enters the massive protostellar phase, the average total luminosity becomes dominated by the intrinsic stellar luminosity and increases to ∼103\sim10^{3}–104 L⊙10^{4}\,L_{\odot}. After t∼150t \sim150 kyr, the stellar luminosity continues to increase with stellar mass and eventually approaches a nearly constant value of ∼4×104 L⊙\sim4 \times10^{4}\,L_{\odot}.

The disk is gravitationally unstable until t∼150t \sim150 kyr, and episodic accretion driven by clump infall produces intense luminosity bursts. The peak luminosity reaches ∼102\sim10^{2}–104 L⊙10^{4}\,L_{\odot} during the low-mass protostellar phase (t≲80t \lesssim80 kyr) and increases to ∼105\sim10^{5}–107 L⊙10^{7}\,L_{\odot} during the massive protostellar phase (t≲150t \lesssim150 kyr), in agreement with three-dimensional simulations of a similar phenomenon by D. M.-A. Meyer et al. [68]. The details of these burst events in the massive protostellar phase are described in § 4.2.

To characterize the disk evolution, we describe the temporal evolution of the disk radius. Examples of the identified disk region are shown by the white contours in panels (a.1) and (a.2) of Figure 2. As seen in panel (a.2), the disk becomes strongly nonaxisymmetric due to disk fragmentation, resulting in large azimuthal variations in the disk radius. Given the substantial azimuthal fluctuations in the disk radius, a single radius cannot fully characterize the disk structure. We therefore introduce

the azimuthally averaged mean disk radius, RdiskR_{\mathrm{disk}}, and use its temporal evolution to characterize the disk evolution.

As shown in panel (d), the disk begins to expand almost simultaneously with protostar formation at t=26t = 26 kyr. Between t=26t = 26–3737 kyr, material continues to accrete efficiently onto the central star and the mass accretion rate remains nearly constant. During this stage, the centrifugal radius of the infalling material is smaller than the sink cell radius (5 au), so the material directly falls into the sink cell and onto the central star. At t=37t = 37 kyr, the centrifugal radius exceeds 5 au and a centrifugally supported disk begins to form, marking the onset of the disk formation stage. Thereafter, the disk continues to expand, reaching ∼500\sim500 au at t=200t = 200 kyr. This expansion is driven by continued accretion from the envelope, subsequent viscous spreading, and gravitational interaction of clumps with each other and radial scattering.

Gas Radial Distribution

Here, we quantitatively describe the gas disk structure using Figure 4. This figure shows the radial profiles of gas physical quantities at two epochs, t=40t = 40 and 150150 kyr, corresponding to those adopted for the spatial distributions in Figure 2. The solid lines in each panel represent the azimuthally averaged values of the physical quantities, while Toomre’s QQ is mass-weighted. The shaded regions indicate the range between the maximum and minimum values over azimuth.

Radial distributions of the gas surface density, Toomre’s Q, and the temperature

Figure 4. Snapshots of the radial distributions of the gas surface density, the Toomre’s QQ, and the temperature. The solid lines represent the azimuthally averaged values, where Toomre’s QQ is mass-weighted, while the shaded areas indicate the maximum and minimum values in the azimuthal direction. The gray solid lines indicate Q=1Q = 1 and 2, highlighting the gravitationally unstable regime where spiral structures can develop without necessarily leading to fragmentation.

As shown by the solid line and the shaded region in panel (a.1), the radial profile of the gas surface density exhibits a high-density, nonaxisymmetric structure within approximately 40 au. The shaded region disappears beyond this radius, indicating that the disk becomes nearly axisymmetric and follows a smooth radial decline. This transition occurs at the disk radius of ∼40\sim40 au at this epoch (see panel (d) of Figure 3). In addition, panel (b.1) shows that the azimuthally averaged Toomre’s QQ is approximately 1–2 within ≲20\lesssim20 au, indicating that the disk is gravitationally unstable. This instability gives rise to nonaxisymmetric density structures. At radii of ∼20\sim20–40 au, the azimuthally averaged QQ exceeds 2. This elevated value is primarily caused by low-density gap regions between spiral arms that increase the azimuthal average. Nevertheless, the lower bound of the shaded region reaches Q≲1Q \lesssim1, indicating that the spiral arms are locally gravitationally unstable despite the larger azimuthally averaged value.

The temperature profile in panel (c.1) shows a steep radial gradient around the disk radius. Inside the disk, the high surface density results in a large optical depth (τR\tau_{\mathrm{R}}), viscous accretion heating and compressional heating raise the azimuthally averaged temperature in the inner disk and producing nonaxisymmetric temperature structures. In contrast, in the envelope, radiative heating from the central star dominates, leading to an axisymmetric temperature distribution with a smooth radial gradient.

We next describe the physical quantities of the disk at t=150t = 150 kyr. At this stage, the disk has expanded to a radius of roughly 300 au (panel (b) in Figure 3). As seen in the gas surface density in panel (a.2), a nonaxisymmetric structure extends across the entire disk. The distribution of the Toomre’s QQ in panel (b.2) shows that the mass-weighted azimuthally averaged QQ is ∼1\sim1–2 at radii of ∼10\sim10–60 au, indicating that this region of the disk is gravitationally unstable, and self-regulated through gravitational torques (e.g, A. C. Boley et al. [13]). At larger radii, r≳60r \gtrsim60 au, dense spiral arms coexist with low-density inter-arm regions. In addition, multiple peaks appear in the shaded regions around ∼200\sim200 au, corresponding to clumps formed within the disk. Strong density contrasts associated with both the spiral structures and clumps produce low-density regions in which the gas surface density decreases drastically. As a result, Toomre’s QQ locally reaches values as high as ∼100\sim100 in these regions.

As the stellar mass increases, in this epoch, the luminosity reaches ∼4×104 L⊙\sim4 \times10^{4}\ L_{\odot}. As a result, the disk temperature is higher than the state at t=40t = 40 kyr, as shown in panel (c.2), with temperatures exceeding ∼100\sim100 K over most of the disk. Nonaxisymmetric temperature structures are observed across the entire disk. These features arise from heating associated with viscous accretion and compressional heating. Especially beyond ∼100\sim100 au, very high temperatures reaching ∼103\sim10^{3}–10410^{4} K are observed. These features result from strong compressional heating within dense clumps.

Radial Distribution of the Maximum Grain Radius

In this section, we examine how dust growth is regulated in a nonaxisymmetric and time-dependent disk. We show that, in dense disk regions, the maximum grain radius is broadly regulated by the azimuthally averaged fragmentation-limited size, whereas in newly formed outer disk regions and low-density regions, dust growth deviates from local fragmentation equilibrium because of finite collision timescales and dust radial transport timescales.

Figure 5 shows the radial profiles of the maximum grain radius, amax⁡a_{\max}, and the ratio of the transport timescale, ttpt_{\mathrm{tp}}, to the collision timescale, tcollt_{\mathrm{coll}}, at t=40t = 40 kyr and 150 kyr. The transport timescale is defined as

Snapshots of the radial distributions of the maximum grain radius and the ratio of the transport to collisional timescales

Figure 5. Snapshots of the radial distributions of the maximum grain radius amax⁡a_{\max} and the ratio of the transport to collisional timescales ttp/tcollt_{\mathrm{tp}}/t_{\mathrm{coll}}. The solid lines show the azimuthally averaged values, where amax⁡a_{\max} is weighted by the dust mass. The shaded regions denote the azimuthal maximum and minimum values. The dashed lines indicate the dust–mass–weighted azimuthal average of the analytical estimate afrag,avea_{\mathrm{frag,ave}} from Equation (30). The gray solid line indicates ttp/tcoll=1t_{\mathrm{tp}}/t_{\mathrm{coll}} = 1, representing the boundary between collision-effective and transport-effective regimes.

ttp=r2∫02πΣg dϕM˙gas(29)t_{\mathrm{tp}} = \frac{r^{2}\int_{0}^{2\pi}\Sigma_{\mathrm{g}}\,\mathrm{d}\phi}{\dot{M}_{\mathrm{gas}}} \tag*{(29)}

where M˙gas\dot{M}_{\mathrm{gas}} is the mass transport rate through the disk. This definition assumes that dust grains remain well coupled to the gas and are transported on the same characteristic timescale as the gas. We adopt a constant value of M˙gas=1.3×10−4 M⊙ yr−1\dot{M}_{\mathrm{gas}} = 1.3 \times10^{-4}\ M_{\odot}\ \mathrm{yr}^{-1}, corresponding to the typical accretion rate onto the central star during the period from t=26t = 26 to 150 kyr150\ \mathrm{kyr}. The solid lines in the amax⁡a_{\max} profiles represent dust-mass-weighted azimuthal averages, while the shaded regions show the range between the azimuthal minimum and maximum values. Only azimuthally averaged profiles are shown for ttp/tcollt_{\mathrm{tp}}/t_{\mathrm{coll}}.

To characterize the dust growth regime, the dashed lines show the dust-mass-weighted azimuthally averaged fragmentation-limited grain radius, afrag,avea_{\mathrm{frag,ave}}. The fragmentation-limited grain radius is derived following T. Birnstiel et al. [10], based on the drag prescription of S. J. Weidenschilling [114]. We define

afrag=1.8×2Σgufrag23πρsαcs2,(30)a_{\mathrm{frag}} = 1.8 \times\frac{2\Sigma_{\mathrm{g}}u_{\mathrm{frag}}^{2}}{3\pi\rho_{\mathrm{s}}\alpha c_{\mathrm{s}}^{2}}, \tag*{(30)}

where the prefactor 1.8 accounts for the difference in the drag coefficient CDC_{\mathrm{D}} between our prescription and that of S. J. Weidenschilling [114] (see Figure 5 of O. P. Stoyanovskaya et al. [96]). Since the fragmentation barrier operates only where urelu_{\mathrm{rel}} reaches ufragu_{\mathrm{frag}} and collisions occur sufficiently frequently, afrag,avea_{\mathrm{frag,ave}} is shown only within the disk radius.

At t=40 kyrt = 40\ \mathrm{kyr}, immediately after disk formation, panel (a.1) shows dust grains in the disk region (∼40 au\sim40\ \mathrm{au}) have already grown significantly from the initial maximum grain radius of 1 μm1\ \mu\mathrm{m}, reaching up to ∼104 μm\sim10^{4}\ \mu\mathrm{m}. Such rapid dust growth is consistent with previous studies of dust evolution in low-mass protostellar systems (e.g., [59, 103, 110]). As shown in panel (b.1), tcollt_{\mathrm{coll}} is shorter than ttpt_{\mathrm{tp}} in the disk region, indicating that dust grains can grow through collisions faster than dust transport inward. A comparison of the azimuthally averaged amax⁡a_{\max} and afrag,avea_{\mathrm{frag,ave}} in panel (a.1) shows that amax⁡a_{\max} is nearly identical to afrag,avea_{\mathrm{frag,ave}} within ∼20 au\sim20\ \mathrm{au}, indicating that dust growth there has already entered the fragmentation-limited regime. In contrast, at ∼20\sim20–40 au40\ \mathrm{au}, amax⁡a_{\max} remains smaller than afrag,avea_{\mathrm{frag,ave}}. In this region, reaching afrag,avea_{\mathrm{frag,ave}} requires tcoll∼1 kyrt_{\mathrm{coll}} \sim1\ \mathrm{kyr}. However, the disk is still continuously expanding outward, and the ∼20\sim20–40 au40\ \mathrm{au} region has existed for only ∼1 kyr\sim1\ \mathrm{kyr} since becoming part of the disk. This timescale is comparable to the collision timescale required for dust grains to grow to the fragmentation barrier. As a result, dust grains in this newly formed outer disk region have not yet had sufficient time to grow up to afrag,avea_{\mathrm{frag,ave}}.

The shaded region of amax⁡a_{\max} represents azimuthal variations caused by nonaxisymmetric structures within the disk. This is because the disk develops spiral arms, where the enhanced dust surface density increases the collision frequency and promotes efficient local dust growth. By contrast, in the surrounding low-density regions, dust growth remains inefficient, and grain sizes increase only marginally from the initial 1 μm1\ \mu\mathrm{m} to at most a few times larger.

In the envelope, dust growth does not occur. As shown in panel (b.1), ttp/tcoll<1t_{\mathrm{tp}}/t_{\mathrm{coll}} < 1 in this region, reflecting both the low dust surface density that leads to long collision timescales and the rapid infall of dust into the inner disk before substantial growth can occur. In low-mass clouds, on the contrary, mild dust growth takes place already in the pre-stellar stage ([110]).

As time progresses to t=150 kyrt = 150\ \mathrm{kyr}, panel (a.2) shows that dust growth extends across the entire disk as the disk expands. Within the inner region ≲60 au\lesssim60\ \mathrm{au}, amax⁡a_{\max} exhibits an approximately axisymmetric distribution, even though the gas surface density (panel (a.2) in Figure 4) still shows pronounced nonaxisymmetric structures. At this stage, approximately ∼100 kyr\sim100\ \mathrm{kyr} have elapsed since disk formation, which is significantly longer than the collisional timescale (tcoll∼kyrt_{\mathrm{coll}} \sim\mathrm{kyr}). In addition, ttp/tcoll≫1t_{\mathrm{tp}}/t_{\mathrm{coll}} \gg1, and tcollt_{\mathrm{coll}} exceeds the local Keplerian timescale. Since the gas properties vary significantly between spiral-arm and inter-arm regions and evolve on orbital timescales, dust grains experience a wide range of local conditions before undergoing collisions. Consequently, dust growth reflects the cumulative effect of these variations rather than the instantaneous local environment. This leads to a maximum grain radius that is more closely related to the azimuthally averaged fragmentation condition, i.e., amax⁡∼afrag,avea_{\max} \sim a_{\mathrm{frag,ave}}.

In the outer disk (∼60\sim60–200 au200\ \mathrm{au}), the azimuthally averaged amax⁡a_{\max} generally agrees with afrag,avea_{\mathrm{frag,ave}}. In this region, the disk develops more prominent nonaxisymmetric structures than in the inner regions, including spiral arms, dense clumps and the gap structures. As a result, high-density regions that contain most of the mass, such as spiral arms and clumps, dominate the mass-weighted azimuthal averages of amax⁡a_{\max} and afrag,avea_{\mathrm{frag,ave}}. Within these dense regions, frequent dust collisions lead to amax⁡a_{\max} being regulated by collisional fragmentation, yielding values close to afrag,avea_{\mathrm{frag,ave}}.

However, the shaded region of amax⁡a_{\max} clearly indicates significant nonaxisymmetry in this part of the disk. This asymmetry originates from the strong gas surface density contrast, which exceeds two orders of magnitude between spiral arms or clumps and the surrounding low-density regions. In the high-density spiral arms and clumps, dust grains efficiently grow through collisional coagulation, producing large grains. By contrast, the low-density regions contain not only grains formed through local collisional growth, but also grains leaked from the dense spiral arms and clumps into the surrounding low-density regions. As spiral arms and clumps continuously form and dissipate in the gravitationally unstable disk, fluid elements containing previously grown dust grains can be transported from these dense structures into the surrounding low-density regions. Some of these leaked grains exceed the local fragmentation barrier in the low-density regions. Although such grains are larger than the local fragmentation-limited size, the collision frequency in the low-density regions is too low for fragmentation to efficiently reduce their sizes. As a result, these large grains can survive for extended periods, causing amax⁡a_{\max} to significantly deviate from the value expected from afrag,avea_{\mathrm{frag,ave}}.

Finally, at r∼200r \sim200–300300 au, the azimuthally averaged amax⁡a_{\max} is smaller than afrag,avea_{\mathrm{frag,ave}}. This is due to ttp/tcoll≲1t_{\mathrm{tp}}/t_{\mathrm{coll}} \lesssim1, where infrequent collisions prevent dust grains from growing to the fragmentation limit.

Effects of Dust Growth on Disk Evolution

In this section, we investigate the effects of dust growth on the evolution of massive protostellar disks and their central stars. Dust growth regulates the Rosseland

and Planck mean opacities. As dust grains grow, the Rosseland mean opacity κR\kappa_{\mathrm{R}} and the Planck mean opacity κP\kappa_{\mathrm{P}} decrease at T≳100KT \gtrsim100\mathrm{K}. However, since the disk remains optically thick over most of its extent throughout the main accretion phase, radiative cooling is primarily controlled by the Rosseland mean opacity, as can be seen from Equation (4). Therefore, the reduction in κR\kappa_{\mathrm{R}} enhances radiative cooling, leading to lower disk temperatures. This, in turn, strengthens the gravitational instability of the disk.

To demonstrate this effect, we compare a massive protostellar disk model that includes dust growth (hereafter the Dust Growth model; DG) with a model that does not consider dust growth (hereafter the No Dust Growth model; NDG). The DG model is identical to the model described in Section 3. In the NDG model, the maximum grain radius is fixed at amax⁡=1 μma_{\max} = 1\,\mu\mathrm{m} at all times, resulting in a higher Rosseland mean opacity κR\kappa_{\mathrm{R}} than in the DG model (Figure 1). Consequently, the disk temperature is systematically higher. All other physical conditions are identical between the two models. By comparing these two models, we highlight the differences in disk evolution and the associated consequences of dust growth.

Comparison of Models with and without Dust Growth

We present a comparative analysis of the DG and NDG models. Figure 6 shows the spatial distributions of key physical quantities at t=150t = 150 kyr for both models. From left to right, the panels display the gas surface density, temperature, and Toomre’s QQ.

Snapshots of the gas surface density, temperature, and Toomre’s $Q$ within the inner $600 \times 600$ au$^{2}$ region for the Dust Growth and No Dust Growth models

Figure 6. Snapshots of the gas surface density, temperature, and Toomre’s QQ within the inner 600×600600 \times600 au2^{2} region for the Dust Growth (upper panels) and No Dust Growth (lower panels) models.

The gas surface density distributions in panels (a.1) and (a.2) show that the DG model undergoes multiple self-gravitational fragmentation events, whereas the NDG model develops a more extended disk region of ∼300\sim300 au with less fragmentation.

In the DG model, the opacity is one to two orders of magnitude lower than in the NDG model, enabling more efficient radiative cooling of the heat generated by viscous accretion heating and compressional heating. As a result, the temperature within ≲200\lesssim200 au is systematically lower in the DG model than in the NDG model, as shown in panels (b.1) and (b.2). This enhanced cooling strengthens gravitational instability, thereby promoting fragmentation of spiral arms ([37, 85, 4]). In contrast, cooling is less efficient in the NDG model, making spiral arms less prone to fragmentation. Consequently, the spiral-arm regions with Toomre’s 0.6≲Q≲1.40.6 \lesssim Q \lesssim1.4 extend to ∼200\sim200 au (panel c.2), significantly larger than the ∼60\sim60 au region seen in the DG model (panel c.1).

To compare the evolution of the two systems, Figure 7 presents the time evolution of the central star mass, accretion rate onto the central star, and the total stellar luminosity. Since the initial conditions are identical except for the treatment of dust growth, the stellar growth histories and final stellar masses (panel a) are nearly identical between the two models. Correspondingly, the final stellar masses are also similar, with 19 M⊙19\,M_\odot for the DG model and 18 M⊙18\,M_\odot for the NDG model.

Time evolution of the physical properties of central star and disk

Figure 7. Time evolution of the physical properties of central star and disk for the Dust Growth model (blue lines) and the No Dust Growth model(red lines): (a) stellar mass, (b) the gas accretion rate to the central star averaged over 1 kyr, (c) the total stellar luminosity averaged over 1 kyr.

The mass accretion rate (panel b) and stellar luminosity (panel c) exhibit broadly similar temporal evolution in both models; however, the DG model shows significantly larger variability. These differences arise from more efficient cooling in the DG model, which makes the disk more gravitationally unstable, thereby promoting more frequent disk fragmentation. As a result, episodic accretion events driven by clump infall occur more frequently and with larger amplitudes.

Accretion Variability and Bursts by Dust Growth

In this section, we examine how dust growth affects the temporal variability of mass accretion and luminosity outbursts. Although the global evolution of the mass accretion rate onto the central star is broadly similar in the DG and NDG models, dust growth enhances gravitational instability and induces stronger episodic variability in the accretion rate. To investigate this behavior in more detail, we analyze the accretion rate on yearly timescales and compare the two models.

Panel (a) of Figure 8 shows the cumulative time spent in different bins of the gas mass accretion rate. The accretion rate, M˙gas\dot{M}_{\mathrm{gas}}, is divided into bins of width Δlog⁡M˙gas=0.5\Delta\log\dot{M}_{\mathrm{gas}} = 0.5. The analysis focuses on the main accretion phase, from t=37t = 37 to 150150 kyr, during which the central star accretes most of its mass (see § 3.2 and § 4.1). In both models, the accretion rate spends most of the time around ∼10−4 M⊙ yr−1\sim10^{-4}\,M_\odot\,\mathrm{yr}^{-1}, consistent with the typical values shown in panel (b) of Figure 7.

Detailed analysis of the gas accretion rate onto the central star

Figure 8. Detailed analysis of the gas accretion rate onto the central star, M˙gas\dot{M}_{\mathrm{gas}}, for both the Dust Growth model (blue) and the No Dust Growth model (red) during the main accretion phase. (left) Cumulative time in each M˙gas\dot{M}_{\mathrm{gas}} bin, where the bin width is set to Δlog⁡M˙gas=0.5\Delta\log\dot{M}_{\mathrm{gas}} = 0.5. (right) Cumulative mass fraction to central stellar mass derived in each M˙gas\dot{M}_{\mathrm{gas}} bin. In this study, we define the quiescent phase as M˙gas<10−5 M⊙ yr−1\dot{M}_{\mathrm{gas}} < 10^{-5}\,M_{\odot}\,\mathrm{yr}^{-1} and the burst phase as M˙gas>10−3 M⊙ yr−1\dot{M}_{\mathrm{gas}} > 10^{-3}\,M_{\odot}\,\mathrm{yr}^{-1}.

We define accretion rates exceeding this typical value by about an order of magnitude as the burst phase. Under this phase, the maximum accretion rate differs significantly between the two models. In the DG model, the peak accretion rate reaches 0.2 M⊙ yr−10.2\,M_\odot\,\mathrm{yr}^{-1}, whereas it is limited to 6×10−3 M⊙ yr−16 \times10^{-3}\,M_\odot\,\mathrm{yr}^{-1} in the NDG model. Moreover, the total duration of such high-accretion states is longer in the DG model, amounting to 880880 yr compared to 510510 yr in the NDG model.

Strong bursts are accompanied by periods of very low accretion. In this study, phases with M˙gas≤10−5 M⊙ yr−1\dot{M}_{\mathrm{gas}} \leq10^{-5}\,M_\odot\,\mathrm{yr}^{-1} are defined as quiescent phases. The

cumulative duration of the quiescent phase is 2727 kyr in the DG model, indicating that approximately 2525% of the main accretion phase is spent in a low-accretion state when dust growth is included. In contrast, the corresponding duration is only 44 kyr in the NDG model.

To quantify how stellar mass is accumulated at different accretion rates, panel (b) of Figure 8 shows the fraction of the final stellar mass accreted at each accretion rate. In both models, the largest fraction of stellar mass is accreted at M˙gas∼10−4 M⊙ yr−1\dot{M}_{\mathrm{gas}} \sim10^{-4}\,M_\odot\,\mathrm{yr}^{-1}. In contrast, the burst phase contributes about 2020% of the total stellar mass in the DG model, whereas its contribution is only ∼6\sim6% in the NDG model.

Finally, we examine the properties of luminosity bursts. Figure 9 shows their peak luminosities and durations. A luminosity burst is defined as a period during which the stellar luminosity exceeds 104 L⊙10^{4}\,L_\odot and is more than 2.52.5 times higher than the intrinsic stellar luminosity. In the DG model, 248248 bursts occur with peak luminosities of ∼104\sim10^{4}–107 L⊙10^{7}\,L_\odot and durations ranging from one year to several tens of years. In contrast, the NDG model produces 4444 bursts with peak luminosities of ∼104\sim10^{4}–105 L⊙10^{5}\,L_\odot and durations of 11–33 years. These results indicate that enhanced gravitational instability due to dust growth increases the frequency, duration, and intensity of accretion-driven luminosity bursts.

Figure 9. Peak luminosity and outburst duration during the main accretion phase for the Dust Growth model (upper) and the No Dust Growth model (lower). An outburst is defined as a period during which the total luminosity exceeds 2.5 times the intrinsic stellar luminosity. For comparison, the observed peak luminosities and outburst durations of S255IR NIRS3 and G323.46-0.08 are shown as gray markers ([98, 119]).

Discussion

In the preceding sections, we presented the coevolution of dust growth and massive protostellar disks. Here, we first discuss how dust growth affects the evolution of massive protostellar disks, with particular emphasis on disk fragmentation and episodic accretion. We then investigate how the evolving disk structure, in turn, influences dust growth.

Disk Fragmentation and Episodic Accretion Enhanced by Dust Growth

Our simulations demonstrate that dust growth can significantly influence the evolution of massive protostellar disks. Dust grains rapidly grow from interstellar sizes, reaching centimeter scales within ∼\sim kyr during the early stages of disk formation, implying that dust evolution affects disk dynamics from the earliest phases. Dust growth reduces the infrared opacity and enhances radiative cooling, which strengthens gravitational instability in the disk. As a consequence, disks with dust growth exhibit more frequent fragmentation and episodic accretion events than models without dust growth. These processes also produce observable signatures in the form of accretion-driven luminosity outbursts.

As shown in Figure 9, the model with dust growth produces more frequent, longer-lasting, and more luminous bursts than the model without dust growth. It is therefore useful to compare these burst properties with observed outbursts in massive protostars. A variety of outburst events from massive protostars have been reported to date (e.g., [17, 35, 56, 62] (X. Xu et al. 2025)). Among them, luminosity bursts observed in S255IR NIRS3 and G323.46−0.08 last for several years and reach peak luminosities exceeding 105L⊙10^{5}L_{\odot} ([98, 119]). These durations and luminosities are broadly consistent with those obtained in the dust-growth model. This agreement suggests that dust-growth-enhanced gravitational instability may contribute to producing luminosity bursts with properties comparable to those observed in massive protostars.

Because disk fragmentation is a plausible pathway to the formation of close multiple systems, our results may also have implications for the origin of massive binary and multiple systems. Most massive stars form as members of binary or higher-order multiple systems ([74]). In particular, systems with separations of ≲1000\lesssim1000 au are commonly thought to originate from disk fragmentation, rather than fragmentation of the parent molecular cloud ([57, 83, 63]). Numerous theoretical studies have investigated disk fragmentation processes (e.g., [52, 67, 79, 71]), and observational evidence supporting multiple star formation through disk fragmentation has also emerged in recent years (e.g., [7, 44, 45, 124, 100, 2] (S. Li et al. 2025)). Our results suggest that dust growth may further promote the formation of massive multiple systems by promoting disk fragmentation.

It should be emphasized, however, that our results do not imply that dust growth alone is responsible for triggering outbursts. Previous studies have shown that similar bursts can arise even without dust growth, depending on the initial conditions of the parent molecular cloud core, including high core masses that produce large accretion rates or sufficiently large angular momentum ([68]). In addition, several processes not included or not fully resolved in our simulations may affect outburst activity, including boundary-layer or magnetospheric accretion, thermal instability, and tidal disruption of clumps in the inner disk

([50, 86, 6, 32, 34] (V. Elbaky an et al. 2026)). Despite these caveats, our results suggest that dust growth facilitates the development of gravitational instability and thereby promotes episodic accretion activity.

We note that the strength of the dust-growth feedback depends on the adopted fragmentation threshold velocity, ufragu_{\mathrm{frag}}. In this study, we adopt ufrag=10 m s−1u_{\mathrm{frag}} = 10\ \mathrm{m\ s^{-1}}, following previous studies, which allows dust grains to grow to centimeter scales. However, the fragmentation threshold velocity remains highly uncertain. For smaller values of ufragu_{\mathrm{frag}}, dust growth becomes less efficient. Nevertheless, even in models with ufrag=1 m s−1u_{\mathrm{frag}} = 1\ \mathrm{m\ s^{-1}}, where the maximum grain radius reaches only amax∼100 μma_{\mathrm{max}} \sim100\ \mu\mathrm{m}, the dust opacity still decreases sufficiently to enhance gravitational instability. As a result, disk fragmentation and luminosity outbursts comparable to those inferred from observations can still occur.

Dust Growth in Massive Protostellar Disks

We discuss how dust growth is regulated in dynamically evolving, nonaxisymmetric massive protostellar disks. A key result of this study is that the maximum grain radius in massive protostellar disks can often be estimated using simple steady, axisymmetric dust-growth models ([121, 122]), even when the disks are strongly nonaxisymmetric and time dependent.

As described in § 3.4, the maximum grain radius, amaxa_{\mathrm{max}}, becomes approximately axisymmetric and approaches the azimuthally averaged fragmentation-limited size, afrag,avea_{\mathrm{frag,ave}}. This behavior is evident at radii of r∼10r \sim10–60 au60\ \mathrm{au}, where ttp/tcoll≳10t_{\mathrm{tp}}/t_{\mathrm{coll}} \gtrsim10 (panel (b.2) of Figure 5). In contrast, in the outer disk where ttp/tcoll≲1t_{\mathrm{tp}}/t_{\mathrm{coll}} \lesssim1, the local distribution of amaxa_{\mathrm{max}} becomes strongly nonaxisymmetric. In these outer regions, dust grains are transported inward before experiencing enough collisions to approach the fragmentation-limited size. The transition occurs only when ttp/tcollt_{\mathrm{tp}}/t_{\mathrm{coll}} significantly exceeds unity, because multiple collisions are required for grains to grow substantially and reach afrag,avea_{\mathrm{frag,ave}}.

These results suggest that dust growth is governed primarily by the ratio ttp/tcollt_{\mathrm{tp}}/t_{\mathrm{coll}} rather than by the global morphology of the disk. When this ratio is sufficiently large, dust grains undergo enough collisions to approach the local fragmentation-limited size before being transported by the evolving disk flow. As a result, the grain-size distribution becomes relatively insensitive to transient nonaxisymmetric structures and is instead regulated by the local balance between dust growth and fragmentation. This explains why steady, axisymmetric dust-growth models can provide reasonable estimates of the maximum grain radius even in dynamically evolving massive protostellar disks.

Recent observations have revealed pronounced nonaxisymmetric structures in massive protostellar disks, including spiral arms and fragmented structures (e.g., [9, 73, 47, 90, 16]). Our results suggest that simple steady, axisymmetric dust-growth models can still provide useful estimates of grain sizes in dense regions of such disks, even when the global disk structure is dynamically evolving and nonaxisymmetric. Therefore, the applicability of steady, axisymmetric dust-growth models depends not on the global morphology of the system, but on whether dust grains can undergo sufficient collisions before being transported away.

Interpreting observed spiral structures nevertheless requires caution. Spiral-like features in massive protostellar systems are not always generated by disk self-gravity and may instead trace infalling streamers ([36, 76, 116]). In contrast to self-gravitating spiral arms, dust grains within streamers may not experience sufficiently frequent collisions for efficient dust growth because of their rapid infall and relatively low densities. Consequently, grain-growth properties inferred for self-gravitating disks may not be directly applicable to streamer-dominated structures.

Future Works and Caveats

In this study, we investigate the coevolution of dust growth and massive protostellar disks using a two-dimensional thin-disk framework. Recently, a fully three-dimensional version of the FEOSAD code, ngFEOSAD, has been developed (E. I. Vorobyov et al. [111]). Although radiative thermal evolution as considered in this work is not yet implemented in ngFEOSAD, future developments of the code will provide an opportunity to test the predictions of our two-dimensional simulations with fully three-dimensional simulations.

A more comprehensive understanding of coevolution of dust growth and massive protostellar disks requires the inclusion of feedback processes such as radiation pressure, photoevaporation, and magnetically driven disk outflow (e.g., [99, 87]). By incorporating these feedback processes, we can investigate how effectively the disk can shield accreting material from such feedback and, consequently, how much material can accrete from the disk onto the protostar. Furthermore, the change in dust opacity associated with dust growth is expected to affect the efficiency of feedback from radiation pressure and photoevaporation (e.g., R. Kuiper & T. Hosokawa [54]; R. Mignon-Risse et al. [72]). Dust growth may also alter the ionization degree of the disk through the adsorption of charged particles onto dust grains, thereby affecting the evolution of the disk magnetic field through non-ideal MHD effects, as reported in studies of low-mass protostellar disks (e.g., U. Lebreuilly et al. [59]; Y. Tsukamoto et al. [103]). Such changes in the magnetic field may also influence the launching and evolution of magnetically driven disk outflows in massive protostellar disks (e.g., B. Commerçon et al. [22]; A. Oliva & R. Kuiper [78]). Future studies incorporating these processes, together with radiation pressure and photoevaporation, will be important for exploring the broader coevolution of dust growth and massive protostellar disks.

We acknowledge that there are still uncertainties associated with the evolution of dust composition, grain shape, porosity, and other dust properties (D. Semenov et al. [92]; M.-A. Carpine et al. [18]). However, as shown in Figure 1, dust growth can change the dust opacity by orders of magnitude, whereas variations associated with dust composition and grain shape are expected to be limited to factors of a few. Thus, although these uncertainties may affect the quantitative value of the opacity, the opacity change associated with dust growth is expected to remain the dominant effect.

In this study, we assume a fixed power-law index of q=3.5q = 3.5 for the dust size distribution. This assumption may break down due to the coagulation of small grains with radius of ≲1 μm\lesssim1\,\mu\mathrm{m} driven by Brownian motion (e.g., C. P. Dullemond & C. Dominik [29]). However, these very small grains are substantially smaller than the wavelengths relevant to the thermal emission considered here, λpeak∼10 μm\lambda_{\mathrm{peak}} \sim10\,\mu\mathrm{m}, and their contribution to the overall variation in opacity is therefore expected to be limited (see Figure 2 of E. I. Vorobyov et al. [112]). In contrast, the dust growth considered in this study increases amax⁡a_{\max} from ∼1 μm\sim1\,\mu\mathrm{m} to several orders of magnitude larger sizes, resulting in a substantial change in the dust opacity. Therefore, the effect of coagulation among the smaller grains is expected to be secondary compared with the opacity change associated with the dust growth in this work.

Recently, bouncing has been proposed as a possible outcome of collisions between fluffy dust aggregates. However, the outcome of such collisions depends on several factors, including the fluffiness of the dust aggregates, collision velocity, and grain radius, making it a highly complex process (e.g., S. Michoulier et al. [70]; H. Oshiro et al. [81]; S. Arakawa et al. [3]). Furthermore, when fluffy dust aggregates undergo repeated collisions, the evolution of their fluffiness can further complicate the dust-growth process. Thus, although bouncing may be a physically important process, its treatment is associated with substantial uncertainties. For this reason, we do not include bouncing in this study. If bouncing is effective, the amount of small dust fragments produced through collisions could be reduced (C. Dominik & C. P. Dullemond [25]). This could decrease the abundance of small grains that are sensitive to infrared wavelengths, leading to a further reduction in opacity. This would support our conclusion that dust growth enhances the gravitational instability of massive protostellar disks.

Summary

In this study, we have investigated dust growth and its impact on the evolution of massive protostellar disks. Dust growth affects the observational interpretation of massive protostellar disks, and also modifies the cooling efficiency of the disk. To explore the coevolution of dust growth and disk evolution, we performed hydrodynamical simulations using the FEOSAD code. Our simulations self-consistently follow the gravitational collapse of an initially rotating molecular cloud core, leading to the formation and evolution of a central star and its circumstellar disk, while simultaneously tracking dust growth within the disk. In addition, we incorporated the evolution of the dust opacity associated with dust growth, thereby accounting for changes in the cooling efficiency.

We found that in massive protostellar disks, dust grains rapidly grow from interstellar sizes of ∼1 μm\sim1\,\mu\mathrm{m} to centimeter scales within a timescale of ∼kyr\sim\mathrm{kyr} shortly after disk formation. This rapid growth implies that dust evolution continuously influences disk evolution from the earliest stages. As dust grains grow, the dust opacity decreases, enhancing radiative cooling and lowering the disk temperature, which can promote the development of gravitational instability.

We compared the evolution of the protostar-disk system with and without dust growth. Enhanced cooling due to dust growth strengthens gravitational instability in the disk, leading to disk fragmentation and the onset of episodic accretion. As a result, mass accretion onto the central star is intensified, increasing the frequency, duration, and magnitude of luminosity outbursts. The outbursts obtained in our dust growth simulation reached peak luminosities up to ∼107 L⊙\sim10^{7}\,L_{\odot}. At the same time, the simulation also produced bursts with luminosities of ∼105 L⊙\sim10^{5}\,L_{\odot} and durations of several years, comparable to observationally reported quantities. Furthermore, disk fragmentation induced by dust growth may contribute to the formation of binary or multiple systems, which are commonly observed around massive stars.

Finally, we have examined the detailed behavior of dust growth in massive protostellar disks, which exhibit nonaxisymmetric and time-variable structures such as spiral arms and clumps driven by gravitational instability. We find that, in sufficiently dense regions where the collisional timescale is shorter than the transport timescale, the maximum grain radius is primarily regulated by azimuthally averaged collisional fragmentation and therefore remains approximately axisymmetric despite the nonaxisymmetric gas structures. This suggests that the fragmentation-limited dust growth framework developed for steady, axisymmetric disks remains broadly applicable even in dynamically evolving self-gravitating disks.

The authors are grateful to Satoshi Okuzumi for useful discussions. The authors are thankful to the anonymous referee for insightful comments that helped improve the manuscript. This work was supported by JSPS KAK-ENHI Grant Numbers 24KJ1092 and 25K07365, and by the NAOJ ALMA Scientific Research Grant, Code 2025-29B. Numerical computations were carried out on Cray XC50 and XD2000 at Center for Computational Astrophysics, National Astronomical Observatory of Japan. We acknowledge support from the AAS Publication Support Fund, which covered the publication charges for this work.

References

  1. [1]Adachi, I., Hayashi, C., & Nakazawa, K. 1976, Progress of Theoretical Physics, 56, 1756, doi: 10.1143/PTP.56.1756DOI
  2. [2]Ahmadi, A., Beuther, H., Bosco, F., et al. 2023, A&A, 677, A171, doi: 10.1051/0004-6361/202245580DOI
  3. [3]Arakawa, S., Oshiro, H., Yoshida, Y., & Yoshii, K. 2026, The Astrophysical Journal, 1010, 116, doi: 10.3847/1538-4357/aea78bDOI
  4. [4]Baehr, H., & Klahr, H. 2015, ApJ, 814, 155, doi: 10.1088/0004-637X/814/2/155DOI
  5. [5]Basu, S. 1997, ApJ, 485, 240, doi: 10.1086/304420DOI
  6. [6]Bell, K. R., & Lin, D. N. C. 1994, ApJ, 427, 987, doi: 10.1086/174206DOI
  7. [7]Beltrán, M. T., Cesaroni, R., Moscadelli, L., et al. 2016, A&A, 593, A49, doi: 10.1051/0004-6361/201628588DOI
  8. [9]Beuther, H., Linz, H., Henning, T., Feng, S., & Teague, R. 2017, A&A, 605, A61, doi: 10.1051/0004-6361/201730575DOI
  9. [10]Birnstiel, T., Klahr, H., & Ercolano, B. 2012, A&A, 539, A148, doi: 10.1051/0004-6361/201118136DOI
  10. [11]Birnstiel, T., Ormel, C. W., & Dullemond, C. P. 2011, A&A, 525, A11, doi: 10.1051/0004-6361/201015228DOI
  11. [12]Birnstiel, T., Dullemond, C. P., Zhu, Z., et al. 2018, ApJL, 869, L45, doi: 10.3847/2041-8213/aaf743DOI
  12. [13]Boley, A. C., Mejía, A. C., Durisen, R. H., et al. 2006, ApJ, 651, 517, doi: 10.1086/507478DOI
  13. [14]Brauer, F., Dullemond, C. P., & Henning, T. 2008, A&A, 480, 859, doi: 10.1051/0004-6361:20077759DOI
  14. [15]Burns, R. A., Sugiyama, K., Hirota, T., et al. 2020, Nature Astronomy, 4, 506, doi: 10.1038/s41550-019-0989-3DOI
  15. [16]Burns, R. A., Uno, Y., Sakai, N., et al. 2023, Nature Astronomy, 7, 557, doi: 10.1038/s41550-023-01899-wDOI
  16. [17]Caratti o Garatti, A., Stecklum, B., Garcia Lopez, R., et al. 2017, Nature Physics, 13, 276, doi: 10.1038/nphys3942
  17. [18]Carpine, M.-A., Ysard, N., Maury, A., & Jones, A. 2025, A&A, 698, A200, doi: 10.1051/0004-6361/20254575
  18. [19]Cesaroni, R., Sánchez-Monge, Á., Beltrán, M. T., et al. 2017, A&A, 602, A59, doi: 10.1051/0004-6361/201630184DOI
  19. [20]Chen, X., Sobolev, A. M., Ren, Z.-Y., et al. 2020, Nature Astronomy, 4, 1170, doi: 10.1038/s41550-020-1144-xDOI
  20. [21]Colella, P., & Woodward, P. R. 1984, Journal of Computational Physics, 54, 174, doi: 10.1016/0021-9991(84)90143-8DOI
  21. [22]Commerçon, B., González, M., Mignon-Risse, R., Hennebelle, P., & Vaytet, N. 2022, A&A, 658, A52, doi: 10.1051/0004-6361/202037479DOI
  22. [23]Cossins, P., Lodato, G., & Clarke, C. 2010, MNRAS, 401, 2587, doi: 10.1111/j.1365-2966.2009.15835.xDOI
  23. [24]Dohnanyi, J. S. 1969, J. Geophys. Res., 74, 2531, doi: 10.1029/JB074i010p02531DOI
  24. [25]Dominik, C., & Dullemond, C. P. 2024, A&A, 682, A144, doi: 10.1051/0004-6361/202347716DOI
  25. [26]Dominik, C., Min, M., & Tazaki, R. 2021, Astrophysics Source Code Library, record ascl:2104.010 http://ascl.net/2104.010
  26. [27]Dong, R., Vorobyov, E., Pavlyuchenkov, Y., Chiang, E., & Liu, H. B. 2016, ApJ, 823, 141, doi: 10.3847/0004-637X/823/2/141DOI
  27. [28]Draine, B. T. 2003, ApJ, 598, 1017, doi: 10.1086/379118DOI
  28. [29]Dullemond, C. P., & Dominik, C. 2005, A&A, 434, 971, doi: 10.1051/0004-6361:20042080DOI
  29. [30]Durisen, R. H., Boss, A. P., Mayer, L., et al. 2007, in Protostars and Planets V, ed. B. Reipurth, D. Jewitt, & K. Keil, 607, doi: 10.48550/arXiv.astro-ph/0603179DOI
  30. [32]Elbakyan, V. G., Nayakshin, S., Caratti o Garatti, A., Kuiper, R., & Guo, Z. 2024, A&A, 692, A256, doi: 10.1051/0004-6361/202451758DOI
  31. [33]Elbakyan, V. G., Nayakshin, S., Meyer, D. M.-A., & Vorobyov, E. I. 2023, MNRAS, 518, 791, doi: 10.1093/mnras/stac3115DOI
  32. [34]Elbakyan, V. G., Wehner, D., Kuiper, R., et al. 2025, A&A, 701, A91, doi: 10.1051/0004-6361/202555559DOI
  33. [35]Fedriani, R., Caratti o Garatti, A., Cesaroni, R., et al. 2023, A&A, 676, A107, doi: 10.1051/0004-6361/202346736DOI
  34. [36]Fernández-López, M., Girart, J. M., López-Vázquez, J. A., et al. 2023, ApJ, 956, 82, doi: 10.3847/1538-4357/ace786
  35. [37]Gammie, C. F. 2001, ApJ, 553, 174, doi: 10.1086/320631DOI
  36. [38]Ginsburg, A., McGuire, B. A., Sanhueza, P., et al. 2023, ApJ, 942, 66, doi: 10.3847/1538-4357/ac9f4aDOI
  37. [39]Girart, J. M., Fernández-López, M., Li, Z.-Y., et al. 2018, ApJL, 856, L27, doi: 10.3847/2041-8213/aab76bDOI
  38. [40]Goddi, C., Ginsburg, A., Maud, L. T., Zhang, Q., & Zapata, L. A. 2020, ApJ, 905, 25, doi: 10.3847/1538-4357/abc88eDOI
  39. [41]Henderson, C. B. 1976, AIAA Journal, 14, 707, doi: 10.2514/3.61409DOI
  40. [42]Hosokawa, T., & Omukai, K. 2009, ApJ, 691, 823, doi: 10.1088/0004-637X/691/1/823DOI
  41. [43]Hunter, T. R., Brogan, C. L., MacLeod, G. C., et al. 2018, ApJ, 854, 170, doi: 10.3847/1538-4357/aaa962DOI
  42. [44]Ilee, J. D., Cyganowski, C. J., Brogan, C. L., et al. 2018, ApJ, 869, L24, doi: 10.3847/2041-8213/aaeefc
  43. [45]Izquierdo, A. F., Galván-Madrid, R., Maud, L. T., et al. 2018, MNRAS, 478, 2505, doi: 10.1093/mnras/sty1096DOI
  44. [46]Johnston, K. G., Robitaille, T. P., Beuther, H., et al. 2015, ApJL, 813, L19, doi: 10.1088/2041-8205/813/1/L19DOI
  45. [47]Johnston, K. G., Hoare, M. G., Beuther, H., et al. 2020, A&A, 634, L11, doi: 10.1051/0004-6361/201937154DOI
  46. [48]Kadam, K., Vorobyov, E., Woitke, P., Basu, S., & van Terwisga, S. 2025, A&A, 695, A167, doi: 10.1051/0004-6361/202450236DOI
  47. [49]Kahn, F. D. 1974, A&A, 37, 149
  48. [50]Kley, W., & Lin, D. N. C. 1996, ApJ, 461, 933, doi: 10.1086/177115DOI
  49. [51]Kornet, K., Stepinski, T. F., & Różyczka, M. 2001, A&A, 378, 180, doi: 10.1051/0004-6361:20011183DOI
  50. [52]Kratter, K. M., Matzner, C. D., Krumholz, M. R., & Klein, R. I. 2010, ApJ, 708, 1585, doi: 10.1088/0004-637X/708/2/1585DOI
  51. [53]Krumholz, M. R., Klein, R. I., McKee, C. F., Offner, S. S. R., & Cunningham, A. J. 2009, Science, 323, 754, doi: 10.1126/science.1165857DOI
  52. [54]Kuiper, R., & Hosokawa, T. 2018, A&A, 616, A101, doi: 10.1051/0004-6361/201832638DOI
  53. [55]Kuiper, R., Klahr, H., Beuther, H., & Henning, T. 2010, ApJ, 722, 1556, doi: 10.1088/0004-637X/722/2/1556DOI
  54. [56]Kumar, J., Ellingsen, S. P., Orosz, G., et al. 2026, MNRAS, 545, staf2159, doi: 10.1093/mnras/staf2159
  55. [57]Kuruwita, R. L., & Haugbølle, T. 2023, A&A, 674, A196, doi: 10.1051/0004-6361/202244882DOI
  56. [58]Larson, R. B., & Starrfield, S. 1971, A&A, 13, 190
  57. [59]Lebreuilly, U., Vallucci-Goy, V., Guillet, V., Lombart, M., & Marchand, P. 2023, MNRAS, 518, 3326, doi: 10.1093/mnras/stac3220DOI
  58. [60]Lee, H., Nayakshin, S., & Booth, R. A. 2025, MNRAS, 544, L18, doi: 10.1093/mnrasl/slaf096DOI
  59. [62]Liu, M., Chen, X., Zhang, Y.-K., & Song, S.-M. 2026, ApJ, 1000, 30, doi: 10.3847/1538-4357/ae4333DOI
  60. [63]Luo, Q.-y., Sanhueza, P., Offner, S. S. R., et al. 2026, ApJ, 999, 192, doi: 10.3847/1538-4357/ae371fDOI
  61. [64]Matsukoba, R., Vorobyov, E. I., & Hosokawa, T. 2025, ApJ, 994, 29, doi: 10.3847/1538-4357/ae0a33DOI
  62. [65]Maud, L. T., Cesaroni, R., Kumar, M. S. N., et al. 2019, A&A, 627, L6, doi: 10.1051/0004-6361/201935633DOI
  63. [66]McKee, C. F., & Tan, J. C. 2002, Nature, 416, 59, doi: 10.1038/416059aDOI
  64. [67]Meyer, D. M.-A., Kuiper, R., Kley, W., Johnston, K. G., & Vorobyov, E. 2018, MNRAS, 473, 3615, doi: 10.1093/mnras/stx2551DOI
  65. [68]Meyer, D. M.-A., Vorobyov, E. I., Elbakyan, V. G., et al. 2021, MNRAS, 500, 4448, doi: 10.1093/mnras/staa3528DOI
  66. [69]Meyer, D. M.-A., Vorobyov, E. I., Kuiper, R., & Kley, W. 2017, MNRAS, 464, L90, doi: 10.1093/mnrasl/slw187DOI
  67. [70]Michoulier, S., Gonzalez, J.-F., & Price, D. J. 2024, A&A, 688, A31, doi: 10.1051/0004-6361/202449719DOI
  68. [71]Mignon-Risse, R., González, M., & Commerçon, B. 2023, A&A, 673, A134, doi: 10.1051/0004-6361/202345845DOI
  69. [72]Mignon-Risse, R., González, M., Commerçon, B., & Rosdahl, J. 2020, A&A, 635, A42, doi: 10.1051/0004-6361/201936605DOI
  70. [73]Motogi, K., Hirota, T., Machida, M. N., et al. 2019, ApJL, 877, L25, doi: 10.3847/2041-8213/ab212fDOI
  71. [74]Offner, S. S. R., Moe, M., Kratter, K. M., et al. 2023, in Astronomical Society of the Pacific Conference Series, Vol. 534, Protostars and Planets VII, ed. S. Inutsuka, Y. Aikawa, T. Muto, K. Tomida, & M. Tamura, 275, doi: 10.48550/arXiv.2203.10066
  72. [75]Okuzumi, S., Momose, M., Sirono, S.-i., Kobayashi, H., & Tanaka, H. 2016, ApJ, 821, 82, doi: 10.3847/0004-637X/821/2/82DOI
  73. [76]Olguin, F. A., Sanhueza, P., Ginsburg, A., et al. 2025, Science Advances, 11, eaw4512, doi: 10.1126/sciadv.adw4512DOI
  74. [77]Olguin, F. A., Sanhueza, P., Oya, Y., et al. 2026, ApJ, 999, 106, doi: 10.3847/1538-4357/ae3bcdDOI
  75. [78]Oliva, A., & Kuiper, R. 2023, A&A, 669, A80, doi: 10.1051/0004-6361/202243835DOI
  76. [79]Oliva, G. A., & Kuiper, R. 2020, A&A, 644, A41, doi: 10.1051/0004-6361/202038103DOI
  77. [80]Ormel, C. W., & Cuzzi, J. N. 2007, A&A, 466, 413, doi: 10.1051/0004-6361:20066899DOI
  78. [81]Oshiro, H., Tatsuuma, M., Okuzumi, S., & Tanaka, H. 2025, ApJ, 983, 75, doi: 10.3847/1538-4357/adbf04DOI
  79. [82]Pan, X., Qiu, K., & Zhang, Q. 2025, A&A, 696, A195, doi: 10.1051/0004-6361/202452944DOI
  80. [83]Pandian, J. D., Chatterjee, R., Csengeri, T., et al. 2024, ApJ, 966, 54, doi: 10.3847/1538-4357/ad2fc6DOI
  81. [84]Pavlyuchenkov, Y. N., Akimkin, V. V., Topchieva, A. P., & Vorobyov, E. I. 2023, Astronomy Reports, 67, 470, doi: 10.1134/S1063772923050086DOI
  82. [85]Rice, W. K. M., Armitage, P. J., Bate, M. R., & Bonnell, I. A. 2003, MNRAS, 339, 1025, doi: 10.1046/j.1365-8711.2003.06253.xDOI
  83. [86]Romanova, M. M., Ustyugova, G. V., Koldoba, A. V., & Lovelace, R. V. E. 2009, MNRAS, 399, 1802, doi: 10.1111/j.1365-2966.2009.15413.xDOI
  84. [87]Rosen, A. L. 2022, ApJ, 941, 202, doi: 10.3847/1538-4357/ac9f3dDOI
  85. [88]Rosen, A. L., Krumholz, M. R., McKee, C. F., & Klein, R. I. 2016, MNRAS, 463, 2553, doi: 10.1093/mnras/stw2153DOI
  86. [89]Sánchez-Monge, Á., Gómez, J. F., Torreles, J. M., et al. 2025, MNRAS, 543, 662, doi: 10.1093/mnras/staf1451
  87. [90]Sanhueza, P., Girart, J. M., Padovani, M., et al. 2021, ApJL, 915, L10, doi: 10.3847/2041-8213/ac081cDOI
  88. [91]Sato, T., Okuzumi, S., & Ida, S. 2016, A&A, 589, A15, doi: 10.1051/0004-6361/201527069DOI
  89. [92]Semenov, D., Henning, T., Helling, C., Ilgner, M., & Sedlmayr, E. 2003, A&A, 410, 611, doi: 10.1051/0004-6361:20031279DOI
  90. [93]Shakura, N. I., & Sunyaev, R. A. 1973, A&A, 24, 337
  91. [94]Stecklum, B., Wolf, V., Linz, H., et al. 2021, A&A, 646, A161, doi: 10.1051/0004-6361/202039645DOI
  92. [95]Stone, J. M., & Norman, M. L. 1992, ApJS, 80, 753, doi: 10.1086/191680DOI
  93. [96]Stoyanovskaya, O. P., Okladnikov, F. A., Vorobyov, E. I., Pavlyuchenkov, Y. N., & Akimkin, V. V. 2020, Astronomy Reports, 64, 107, doi: 10.1134/S1063772920010072DOI
  94. [97]Sugiyama, K., Saito, Y., Yonekura, Y., & Momose, M. 2019, The Astronomer’s Telegram, 12446, 1
  95. [98]Szymczak, M., Olech, M., Wolak, P., Gérard, E., & Bartkiewicz, A. 2018, A&A, 617, A80, doi: 10.1051/0004-6361/201833443DOI
  96. [99]Tanaka, K. E. I., Tan, J. C., & Zhang, Y. 2017, ApJ, 835, 32, doi: 10.3847/1538-4357/835/1/32DOI
  97. [100]Tanaka, K. E. I., Zhang, Y., Hirota, T., et al. 2020, ApJL, 900, L2, doi: 10.3847/2041-8213/abadfcDOI
  98. [101]Toomre, A. 1964, ApJ, 139, 1217, doi: 10.1086/147861DOI
  99. [102]Truelove, J. K., Klein, R. I., McKee, C. F., et al. 1998, ApJ, 495, 821, doi: 10.1086/305329DOI
  100. [103]Tsukamoto, Y., Machida, M. N., & Inutsuka, S.-i. 2023, PASJ, 75, 835, doi: 10.1093/pasj/psad040DOI
  101. [104]Visser, R., van Dishoeck, E. F., Doty, S. D., & Dullemond, C. P. 2009, A&A, 495, 881, doi: 10.1051/0004-6361/200810846DOI
  102. [105]Vorobyov, E. I. 2013, A&A, 552, A129, doi: 10.1051/0004-6361/201220601DOI
  103. [106]Vorobyov, E. I., Akimkin, V., Stoyanovskaya, O., Pavlyuchenkov, Y., & Liu, H. B. 2018, A&A, 614, A98, doi: 10.1051/0004-6361/201731690DOI
  104. [107]Vorobyov, E. I., & Basu, S. 2009, MNRAS, 393, 822, doi: 10.1111/j.1365-2966.2008.14376.xDOI
  105. [108]Vorobyov, E. I., & Basu, S. 2010, ApJ, 719, 1896, doi: 10.1088/0004-637X/719/2/1896DOI
  106. [109]Vorobyov, E. I., Elbakyan, V. G., Johansen, A., et al. 2023, A&A, 670, A81, doi: 10.1051/0004-6361/202244500DOI
  107. [110]Vorobyov, E. I., Elbakyan, V. G., Skliarevsk ii, A., Akimkin, V., & Kulikov, I. 2025, A&A, 699, A27, doi: 10.1051/0004-6361/202553718DOI
  108. [111]Vorobyov, E. I., Kulikov, I., Elbakyan, V. G., McKevitt, J., & Güdel, M. 2024a, A&A, 683, A202, doi: 10.1051/0004-6361/202348023DOI
  109. [112]Vorobyov, E. I., Skliarevsk ii, A. M., Elbakyan, V. G., Dunham, M., & Güdel, M. 2026, Frontiers in Astronomy and Space Sciences, 13, 1728292, doi: 10.3389/fspas.2026.1728292DOI
  110. [113]Vorobyov, E. I., Skliarevsk ii, A. M., Guedel, M., & Molyarova, T. 2024b, A&A, 687, A192, doi: 10.1051/0004-6361/202349104DOI
  111. [114]Weidenschilling, S. J. 1977, MNRAS, 180, 57, doi: 10.1093/mnras/180.2.57DOI
  112. [115]Weingartner, J. C., & Draine, B. T. 2001, ApJ, 548, 296, doi: 10.1086/318651DOI
  113. [116]Weng, J., Lu, X., Cheng, Y., et al. 2026, ApJ, 1003, 219, doi: 10.3847/1538-4357/ae6813DOI
  114. [117]Whipple, F. L. 1972, in From Plasma to Planet, ed. A. Elvius, 211
  115. [118]Williams, G. M., Cyganowski, C. J., Brogan, C. L., et al. 2022, MNRAS, 509, 748, doi: 10.1093/mnras/stab2973DOI
  116. [119]Wolf, V., Stecklum, B., Caratti o Garatti, A., et al. 2024, A&A, 688, A8, doi: 10.1051/0004-6361/202449891DOI
  117. [121]Yamamuro, R., Tanaka, K. E. I., & Okuzumi, S. 2023, ApJ, 949, 29, doi: 10.3847/1538-4357/acc52fDOI
  118. [122]Yamamuro, R., Tanaka, K. E. I., & Okuzumi, S. 2025, ApJ, 990, 59, doi: 10.3847/1538-4357/adf49cDOI
  119. [123]Yorke, H. W., & Sonnhalter, C. 2002, ApJ, 569, 846, doi: 10.1086/339264DOI
  120. [124]Zhang, Y., Tan, J. C., Tanaka, K. E. I., et al. 2019, Nature Astronomy, 3, 517, doi: 10.1038/s41550-019-0718-yDOI
  121. [125]Zinchenko, I., Liu, S.-Y., Su, Y.-N., & Sobolev, A. M. 2017, A&A, 606, L6, doi: 10.1051/0004-6361/201731752DOI

Paper details

vlnc:W_dtxy3h8z
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents