betaFeedback

WorksPhysics and Astronomy

Spin-phonon coupling and isotope-related pseudo-molecule vibrations in layered Cr2_2Ge2_2Te6_6 ferromagnet

Abstract

The vibrational structure of chromium germanium telluride (Cr2_2Ge2_2Te6_6, CGT) is investigated and a strong spin-phonon coupling is revealed. The measured high-resolution Raman scattering (RS) spectra are composed of the 10 Raman-active modes: 5Ag_\textrm{g} and 5Eg_\textrm{g}, predicted by calculation using the density functional theory and identified using polarization-resolved RS measurements. We also studied the effect of temperature on the RS spectra of CGT from 5~K to 300~K. A strong magneto-phonon coupling in CGT is revealed at temperatures of about 150~K and 60~K, which are associated with the appearance of the local magnetic order in the material and the transition to the complete ferromagnetic phase, respectively. Moreover, a unique shape of the Ag5_g^5 mode composed of a set of very narrow Raman peaks is simulated using a model that takes into account vibrations of Ge-Ge pseudo-molecules for various Ge isotopes.

Introduction

Layered magnetic materials (LMMs) have recently been revised for potential applications in spintronics and electronics [1, 2]. Their unique properties of long-range order, combined with their layered structure, uncover new exciting possibilities, both in new magnetic technologies and improving our fundamental understanding of spin dynamics. Although many recently studied LMMs, such as FePS3_3, CrSBr, and MnBi2_2Te4_4 are antiferromagnetic, comparatively few members of that family of materials exhibit ferromagnetic interlayer coupling. Among the most prominent compounds of ferromagnetic layered are CrCl3_3, Fe3_3GeTe2_2, and Cr2_2Ge2_2Te6_6. Their structural stability, compatibility with van der Waals (vdW) heterostructures, and distinctive electronic and magnetic properties make them highly promising candidates for the realization of innovative and advanced device concepts [3].

Cr2_2Ge2_2Te6_6 (CGT) is a vdW semiconducting ferromagnet with bulk Curie temperature (TCT_C) of about 61 K, a strong magnetic anisotropy with an out-of-plane easy axis, and negligible coercivity [4, 5, 6, 7]. The magnetic properties of CGT can be modified using various perturbations, such as: doping [8], electric field [9, 10], strain [11], and pressure [12, 13, 14]. The CGT is also characterized by a strong magneto-elastic coupling, which can be accompanied by the spin-phonon coupling (SPC). The common approach to investigating SPC in CGT crystals is the nondestructive and versatile Raman scattering technique [15, 16, 17, 18, 19].

In this work, we reveal a complete set of the 10 theoretically predicted Raman active modes, 5Ag5A_g and 5Eg5E_g, using high-resolution Raman scattering (RS) spectroscopy performed with polarization resolution and as a function of temperature from 5 K to 300 K. Our results demonstrate that nearly all observable modes exhibit distinct phase-dependent changes in their temperature-dependent properties. A strong magneto-phonon coupling in CGT is revealed at temperatures of about 150 K and 60 K, which are associated with the appearance of the local magnetic order in the material and the transition to the complete ferromagnetic phase, respectively. We also successfully extracted spin–phonon coupling constants for almost all detected modes. Furthermore, we observe an unusual fine structure of the Ag5A_g^5 mode comprising a set of very narrow peaks, which is reconstructed using a model that takes into account vibrations of Ge-Ge pseudo-molecules for various Ge isotopes.

Results and discussion

Crystal structure and phonon dispersion

CGT crystallizes in a rhombohedral structure (space group R3ˉ\mathrm{R}\bar{3}, no. 148) with a vdW stacking of Te-Ge-Cr-Ge-Te hexagonal layers [4, 5]. The schematic representation of the atomic structure of the CGT crystal is shown in Figure 1. CGT crystals are composed of a series of octahedral units in which Te atoms are located at the vertices, and either a single Cr atom or two Ge atoms are positioned at the center. These atoms are bonded by covalent bonds. The octahedra connect with each other to form a single layer of material, as shown in Figure 1. Between the individual layers of the crystal, there are only weak vdW forces, which makes this material particularly well-suited for mechanical exfoliation. The octahedra containing Cr and Ge atoms alternate, forming a repeating supercell. The entire crystal contains an equal number of Cr and Ge atoms. However, since the octahedra with Ge contain two Ge atoms each, this is compensated by having twice as many Cr-containing units as Ge-containing ones throughout the crystal.

Schematic representation of the atomic structure of the CGT crystal in perspective, side, and top views

Figure 1. The schematic representation of (a) perspective with rhombohedral axis, (b) side, and (c) top views with hexagonal axis of the atomic structure of the CGT crystal. The black shapes represent the unit cells.

The crystal structure of the CGT belongs to space group no. 148 with Cr, Ge, and Te atoms in the 6c, 6c, and 18f Wyckoff positions, respectively. The symmetries of the lattice vibrations at the Γ\Gamma point of the Brillouin zone (BZ) can be assigned to the following 30 irreducible representations: Γ≡5Ag⊕5Eg⊕5Au⊕5Eu\Gamma\equiv5A_g \oplus5E_g \oplus5A_u \oplus5E_u. There are 15 Raman-active phonon modes: 5Ag5A_g and 10Eg10E_g, and 15 infrared-active ones: 5Au5A_u and 10Eu10E_u. Note that the EgE_g and EuE_u modes are doubly degenerate, which gives rise to 10 Raman- and infrared-active vibrations. We optimized the geometric parameters and calculated the dispersion of the phonon modes for bulk CGT in the presence of ferromagnetic order within the density functional theory (DFT) framework, as illustrated in Figure 2.

Phonon dispersion of bulk CGT crystal in rhombohedral primitive cell with ferromagnetic order

Figure 2. Phonon dispersion of bulk CGT crystal in rhombohedral primitive cell with ferromagnetic order. The Γ\Gamma point corresponds to center of the Brillouin zone. The blue curves denotes Raman-active modes, while the orange curves correspond to the remaining modes, i.e. infrared-active or inactive.

The optimized lattice constant of the rhombohedral cell, a=7.889a=7.889 Å, corresponds to a=6.882a=6.882 Å in the hexagonal cell, in good agreement with the experimental value of a=6.823a=6.823 Å and c=20.564c=20.564 Å [5]. The Raman-active modes at the Γ\Gamma point are labeled on the right with the superscripts on the labels, which describe additional numbering because of their increased Raman shift. In particular, the Ag5A_g^5 mode shows a negligible dependence on the momentum (kk) throughout the BZ, compared to the other modes.

Polarization dependence of phonon modes

We investigated spin-phonon coupling using the RS technique on mechanically exfoliated thick CGT layers with thicknesses in the range of tens of nanometers deposited on Si/SiO2_2, which can be treated as bulk-like CGT flakes. The optical photographs of the flakes under study with their corresponding atomic force microscopy (AFM) images are shown in Section S1 of the Supporting Information (SI). The representative low temperature (T=5T=5 K) polarized RS spectra of a 24 nm thick CGT flake with co-linear (XX) and cross-linear (XY) polarization using excitation energy 1.58 eV are presented in Figure 3. The choice of excitation used in the following analysis is motivated by the quality of the Raman spectrum obtained under illumination of 1.58 eV as compared to other available energies, i.e. 1.96 eV, 2.21 eV, 2.41 eV, and 3.06 eV, see Section S2 of the SI for details. Ten distinct RS peaks are observed in the spectra, as predicted theoretically. Due to the observed polarization-dependences of peaks in the Figure (see also Section S3 of the SI for details), they can be attributed to the five out-of-plane AgA_g modes, apparent at 76.5 cm−1^{-1} (Ag1A_g^1), 111.6 cm−1^{-1} (Ag2A_g^2), 137.1 cm−1^{-1} (Ag3A_g^3), 219.0 cm−1^{-1} (Ag4A_g^4), and 295.1 cm−1^{-1} (Ag5A_g^5); and five in-plane EgE_g modes, apparent at 78.5 cm−1^{-1} (Eg1E^{1}_{g}), 86.8 cm−1^{-1} (Eg2E^{2}_{g}), 111.2 cm−1^{-1} (Eg3E^{3}_{g}), 220.4 cm−1^{-1} (Eg4E^{4}_{g}), and 234.6 cm−1^{-1} (Eg5E^{5}_{g}). DFT calculations yield frequencies: for AgA_{g} modes, 70.6 cm−1^{-1}, 109.9 cm−1^{-1}, 131.3 cm−1^{-1}, 208.1 cm−1^{-1}, and 276.1 cm−1^{-1}; for EgE_{g} modes, 75.8 cm−1^{-1}, 85.3 cm−1^{-1}, 105.8 cm−1^{-1}, 214.6 cm−1^{-1}, and 225.6 cm−1^{-1}. The experimental and theoretical phonon energies show good overall agreement. Although the calculated values are slightly lower than those extracted from the RS spectra, their relative energy differences align very well. As the Eg3E^{3}_{g} and Ag2A^{2}_{g} modes exhibit nearly degenerate energies at 5 K, we analyzed their polarization evolutions at room temperature to confirm their distinct identities, see Section S3 in the SI for details. In particular, the Ag5A^{5}_{g} mode displays an unexpected multipeak structure, which will be discussed in detail in the final section of this work.

Raman Scattering spectra of the 24 nm thick CGT flake

Figure 3. Raman Scattering spectra of the 24 nm thick CGT flake measured at 5 K with co-linear (XX) and cross-linear (XY) polarization using excitation energy 1.58 eV and excitation power of 1 mW. The horizontal scale was adjusted with breaks for clarity.

Phase transitions revealed by temperature-dependent Raman scattering

To investigate the coupling between the magnetic and vibrational properties of CGT, we performed temperature-dependent RS measurements. Figure 4 shows the false-color map of the temperature evolution of the RS spectra of the investigated CGT flake. Interestingly, the RS spectra remain remarkably stable with minimal variations in energies, linewidths, and intensities of the Raman peaks up to temperatures of about 60 K, which correspond to the TCT_C temperature of CGT. At higher temperatures (T>TCT > T_C), a pronounced transformation in the RS spectra is apparent. A rapid decrease in mode energies and a significant reduction in their intensities

False-color map of the temperature evolution of the RS spectra

Figure 4. False-color map of the temperature evolution of the RS spectra of the exfoliated 24-nm thick CGT flake under 1.58 eV excitation with 1 mW power. The white horizontal dash-dot line denotes Curie temperature (TCT_C) of CGT. The horizontal scale was adjusted with breaks for clarity.

are easily recognized. The most spectacular effect is observed for the Ag1A^{1}_{g} peak, whose energy exhibits a significant non-monotonic dependence in the temperature range from TCT_C to 300 K. This pronounced spectral reorganization in the RS spectra can be attributed to the significant spin-phonon coupling in CGT due to the transition from the ferromagnetic to the paramagnetic phase when passing through the Curie temperature, consistent with previous reports devoted to this material [15, 16, 18]. Note that because of the much higher spectral resolution in our experiments as well as the high quality of the investigated CGT crystals, our temperature-dependent results are much more detailed than the previously published [15, 16, 18].

To complete our temperature-related analysis, we extracted the energies, linewidths, and intensities of all the observed phonon modes by their deconvolution using the Lorentzian function. The obtained temperature evolutions of the peak energies, linewidths (full widths at half maximum, FWHMs), and intensities for all 10 Raman peaks are presented in Section S4 of the SI. For clarity, here, we focus on the temperature evolution of the Ag1A^{1}_{g}, Eg2E^{2}_{g}, Ag3A^{3}_{g}, and Eg4E^{4}_{g} modes, as shown in Figure 5, which displays their energy, linewidth, and intensity dependencies on temperature.

Temperature evolutions of Raman shifts, linewidths, and integrated intensities

Figure 5. Temperature evolutions of the (a) Raman shifts, (b) linewidths and (c) integrated intensities of the selected four Raman modes, i.e. Ag1A_g^1, E2g2E_{2g}^2, Ag3A_g^3, E4g4E_{4g}^4 measured on the exfoliated 24-nm thick CGT flake. The black vertical dash-dot line corresponds to the Curie temperature (TCT_C), while the red vertical doted line denote the second phase change temperature (T∗T^*). The gray curves are result of fitting using Balkanski model (Eq. (1)) to the data measured only above the T1T_1, i.e. in the paramagnetic phase.

Firstly, let us focus on the energy dependence of the studied Raman peaks as a function of temperature, see Figure 5(a). Below TCT_C value, the Ag1A^{1}_{g}, Eg2E^{2}_{g}, Ag3A^{3}_{g}, and Eg4E^{4}_{g} energies remain nearly constant. In the intermediate temperature range (60–150 K), their energy evolutions deviate from almost linear shifts common to various layered materials [20, 21, 22]. In particular, the Ag1A^{1}_{g} peak experiences a blueshift with increased temperature up to about 150 K, when its dependence changes to the redshift. This may indicate that the transition from the ferromagnetic phase to the paramagnetic phase is not abrupt when passing through the Curie temperature. We assume that an intermediate state with local ferromagnetic domains occurs at temperatures between TC≈60T_C \approx60 K and T∗≈150T^* \approx150 K [18], while a pure paramagnetic phase is evident at higher temperatures.

The measured temperature dependence of the phonon frequencies generally contains contributions from both explicit anharmonic phonon–phonon interactions and implicit anharmonicity associated with thermal expansion. Spachmann et al. reported strongly anisotropic thermal expansion in Cr2_2Ge2_2Te6_6, with effective Grüneisen parameters of γab=0.32\gamma_{ab} = 0.32 and γc=0.56\gamma_c = 0.56 [23]. Using the reported lattice expansion, we estimate that the corresponding quasi-harmonic contribution produces a fractional phonon-frequency change of the order of several 10−310^{-3} over the investigated temperature range. We note that these values represent effective macroscopic rather than mode-specific Grüneisen parameters and therefore provide only an order-of-magnitude estimate. Moreover, mechanical coupling of the exfoliated flakes to the substrate may modify their thermal expansion. Accordingly, the Balkanski model used here should be regarded as an effective description of the dominant anharmonic temperature dependence, while a smaller contribution from lattice thermal expansion cannot be completely excluded.

To quantitatively analyze the spin-phonon coupling in CGT, we fitted the temperature evolution of the phonon energies, ωanh(T)\omega_{\mathrm{anh}}(T), using the anharmonic model proposed in Ref. 24, which reads:

ωanh(T)=ω0+A(1ex+1)+B(1+3ey−1+3(ey−1)2)(1)\omega_{\mathrm{anh}}(T) = \omega_0 + A\left(\frac{1}{e^x+1}\right) +B\left(1+\frac{3}{e^y-1}+\frac{3}{(e^y-1)^2}\right) \tag*{(1)}

where ω0\omega_0, AA, and BB are fitting parameters, x=ℏω02kBTx = \frac{\hbar\omega_0}{2k_{\mathrm{B}}T}, y=ℏω03kBTy = \frac{\hbar\omega_0}{3k_{\mathrm{B}}T}, and ω0+A+B\omega_0 + A + B is the phonon frequency at 0 K.

As can be seen in Figure 5(a), this model can characterize the phonon temperature dependences, but only for temperatures higher than T∗T^{*}. At T<TCT < T_{\mathrm{C}} the phonon energies are significantly smaller or larger than those predicted by the model. The reason for this aspect is the spin-phonon coupling caused by ionic motions, as in other LMMs [25]. The spin-phonon coupling coefficient is given by the formula [15, 18]:

ω(T)∼ωanh(T)+λ⟨Si⋅Sj⟩(2)\omega(T) \sim\omega_{\mathrm{anh}}(T) + \lambda\langle S_i \cdot S_j \rangle \tag*{(2)}

where ω(T)\omega(T) represents the measured phonon energy, ωanh(T)\omega_{\mathrm{anh}}(T) denotes the phonon energy without spin-phonon coupling, λ\lambda denotes the coupling strength, ⟨Si⋅Sj⟩\langle S_i \cdot S_j \rangle is the spin-spin correlation function of neighboring spins, and the values of SiS_i and SjS_j are 3/23/2 [5, 26, 27] giving ⟨Si⋅Sj⟩\langle S_i \cdot S_j \rangle value of 9/49/4. The obtained λ\lambda values for the ωanh(T=5 K)\omega_{\mathrm{anh}}(T=5\ \mathrm{K}) are −0.34 cm−1-0.34\ \mathrm{cm}^{-1}, 0.78 cm−10.78\ \mathrm{cm}^{-1}, 0.15 cm−10.15\ \mathrm{cm}^{-1}, and 0.82 cm−10.82\ \mathrm{cm}^{-1} correspondingly for the Ag1A_{g}^{1}, Eg2E_{g}^{2}, Ag3A_{g}^{3}, and Eg4E_{g}^{4} modes.

The varying magnitude of phonon renormalization observed across different modes near 60 K and 150 K can be understood through mode-selective spin-phonon coupling [28]. Because each phonon mode is characterized by a distinct eigenvector, different modes dynamically modulate the relevant magnetic exchange pathways, bond lengths, and bond angles to different extents. Modes involving stronger modulation of the dominant magnetic exchange pathways are therefore expected to exhibit larger spin-phonon coupling coefficients λ\lambda, and consequently more pronounced frequency renormalization. Furthermore, the anomalies observed around 150 K can be associated with the development of short-range spin correlations in the correlated paramagnetic regime, which may selectively affect phonon modes sensitive to local exchange pathways before the onset of long-range ferromagnetic ordering near 60 K.

Some of our results are consistent with previously reported findings [15]. We note that the literature contains contradictory results for comparable measurements but performed with much smaller spectral resolution [18]. Furthermore, for most of the phonon modes analyzed in this work, the spin–phonon coupling constants have not been previously reported. The extracted λ\lambda values for all the investigated modes compared with those reported in Refs. 15, 18 are summarized in a table in Section S4 of the SI.

The influence of the spin-phonon coupling is also displayed in the temperature evolution of the Raman peaks, see Figure 5(b). The linewidths of the Ag1A_{g}^{1}, Eg2E_{g}^{2}, Ag3A_{g}^{3}, and Eg4E_{g}^{4} modes maintain a consistent level up to TCT_{\mathrm{C}} value. All the analyzed linewidths reveal distinct changes upon crossing the Curie temperature, i.e. the modes broaden significantly. In particular, the Eg2E_{g}^{2} and Eg4E_{g}^{4} linewidths increase more than two times at TCT_{\mathrm{C}}. The signature of the T∗T^{*} temperature is seen for the Ag1A_{g}^{1} mode, while for nine other modes (see Section S4 of the SI), there is no obvious indication. Note that our results are qualitatively in agreement with the previous reports [15, 18], but there is an evident difference in the extracted linewidths of phonon modes.

In our experiment, the Ag3A_{g}^{3} linewidth is of about 0.5 cm−10.5\ \mathrm{cm}^{-1} at 5 K, while the corresponding values reported in the literature are of around 0.7 cm−10.7\ \mathrm{cm}^{-1} [15] and 2.6 cm−12.6\ \mathrm{cm}^{-1} [18]. This indicates that the quality of the investigated CGT crystal in this work is much higher or that the resolution of our experimental setup is substantially larger than that of the existing research.

The temperature evolutions of the phonon intensities are particularly intriguing, as two competing processes may influence it. There are non-resonant and resonant conditions of the RS excitation, which change as a function of temperature. Moreover, the temperature-induced transition between the ferromagnetic and paramagnetic phases may also affect the Raman modes intensities. Consequently, it is very difficult to determine independently both effects, but we describe the apparent signatures of the magnetic one in the following. The Eg4E_{g}^{4} intensity exhibits an almost fixed value with a fairly large dispersion, whereas those of the Ag1A_{g}^{1}, Eg2E_{g}^{2}, and Ag3A_{g}^{3} modes are described by more organized trends. There are step-like intensity variations at TCT_{\mathrm{C}} (Ag1A_{g}^{1} and Eg2E_{g}^{2}) and at T∗T^{*} (Ag1A_{g}^{1}, Eg2E_{g}^{2}, and Ag3A_{g}^{3}), which are assigned to the transition between the ferromagnetic and (quasi-)paramagnetic phases. Our results indicate that the intensity can also be used to distinguish the transition temperature between different magnetic phases, as reported for other LMMs, e.g. CrBr3_3 [29] and CrSBr [30].

Fine structure of Ge-Ge vibration

As it can be seen in Figure 6, the Ag5A_{g}^{5} peak has a very specific landscape. This mode exhibits a structure composed of eleven narrow peaks, which we labeled using numbering because of their increased Raman shift. The energy distance difference the consecutive peaks is only about 1 cm−11\ \mathrm{cm}^{-1}. The linewidths of the individual peaks are on the order of 0.4 cm−10.4\ \mathrm{cm}^{-1} and are comparable to the smallest linewidths for other phonon modes, i.e. Ag1A_{g}^{1}, Ag2A_{g}^{2}, Ag3A_{g}^{3}, Eg1E_{g}^{1}. Importantly, the Ag5A_{g}^{5} fine structure is observable at T=5T=5 K under specific excitation energies, 1.58 eV and 1.91 eV, likely due to the higher spectral resolution of the measurement setup in that energy range, see Section S2 of the SI. This fine structure is present throughout the ferromagnetic phase (from 5 K to 60 K). The modes characterized by the lowest intensity, i.e. 1, 3, 5, 7, 9 disappear abruptly above the TCT_{\mathrm{C}} temperature, while those of the remaining ones can be resolved up to almost the T∗T^{*} value, and finally only a broad Raman peak remains at higher temperatures (see Figure 4 and Fig. S4). This suggests that the fine structure of the Ag5A_{g}^{5} mode can be observed not only in the pure ferromagnetic phase, but also is apparent in the intermediate phase.

Experimental and simulated Raman spectra of the A$_g^5$ mode, with schematic Ge–Ge vibration inset

Figure 6. Experimental Raman spectrum of the Ag5A_g^5 mode measured on the exfoliated 24-nm thick CGT flake at T=5T=5 K using excitation energy 1.58 eV and excitation power of 1 mW (blue curve) and simulated Raman spectrum of the Ag5A_g^5 mode including various Ge isotopes (green curve). The 1…11 numbers label the phonon peaks observed in experimental data, while the corresponding calculated lines are indicated by their assignment to pairs formed by different Ge isotopes (e.g. 73-76). The inset shows the schematic representation of the Ag5A_g^5 vibration.

The observed fine structure of a Raman mode has recently been reported by Chen [31]. The Authors presented a model involving nonlinear interactions between optical phonons. We have proposed an alternative explanation of the observed structure, which we relate to the isotope effects (for review see [32]).

The calculated Γ-point eigenvector of the Ag5A_g^5 mode confirms that its vibrational character is strongly dominated by the Ge–Ge pair. As summarized in Table SII of the Supplementary Information, the displacement amplitude of each Ge atom is approximately 0.697, whereas the corresponding amplitudes are only about 0.068 for Te and 0.005 for Cr. Thus, the Ge displacement is approximately one order of magnitude larger than that of Te and more than two orders of magnitude larger than that of Cr. Moreover, the two Ge atoms move in opposite directions, consistent with a predominantly Ge-Ge stretching vibration. The substantially smaller displacements of the surrounding Cr and Te atoms indicate that their contribution to this mode is comparatively weak. Therefore, to a good approximation, the Ag5A_g^5 vibration can be treated as an effective diatomic vibration of the two Ge atoms, forming a Ge-Ge pseudo-molecule, as schematically illustrated in the inset of Figure 6. The complete Cartesian components and magnitudes of the calculated atomic displacements are provided in Table SII of the SI.

This results in an extremely flat dispersion of the Ag5A_g^5 mode throughout the BZ, as presented in Figure 2. We show that the observed fine structure of the Ag5A_g^5 mode can be explained by considering the five naturally occurring germanium isotopes, i.e., 70, 72, 73, 74, and 76 with their corresponding abundances, 20.38%, 27.31%, 7.76%, 36.72%, and 7.83% [33]. Consequently, the Ge-Ge vibration in the Ag5A_g^5 mode can originate from Ge pairs formed by various 15 isotope configurations, e.g. 70-70, 72-76, etc. Using a simple approach with two single point masses connected by a spring, we extracted the relative frequency spectrum for different Ge molecules, because the frequency of a given isotope composition is inversely proportional to the square root of the Ge-Ge pair reduced mass; see the SI for details. The intensity of a given vibration was taken as a product of the natural abundances of isotopes forming a Ge-Ge pair. Finally, we simulate the Raman spectrum of the Ag5A_g^5 mode assuming the Lorentz distribution of a given peak with input of its calculated frequency and intensity and the determined experimental linewidth of 0.4 cm−1^{-1}, which is presented in Figure 6. The comparison of the measured experimentally and simulated theoretically of the Ag5A_g^5 fine structures is excellent. In addition, we extracted the value of the force constant (KK) of the Ge pseudo-molecule in the CGT crystal on the level of about 187 N/m using the model discussed in the SI. The found KK value is much smaller compared to about 2300 N/m and 1200 N/m reported correspondingly to the well-known diatomic molecules of N2_2 and O2_2 [34], but is similar to the one of Si2_2 molecules (~70 N/m) and larger than the ones of Li2_2 and Na2_2 molecules (~30 N/m and ~20 N/m, respectively) [34]. Note that the theoretically predicted KK constant for the ground state of the Ge2_2 molecule is calculated to be 270 N/m [35], which is two times larger than 187 N/m for the investigated Ge pseudo-molecule in the CGT crystal.

We note that a similar fine structure of a Raman scattering line was previously reported in natural Ge [36]. The spectrum of Ge-O quasimolecules in natural Ge at 2.03 K showed the complex fine structure associated with each of the distinct isotopic combinations of the two Ge atoms in the Ge-O quasimolecule identified by the average isotopic mass of Ge for each pair of lines. This seems to strongly support our explanation of the Ge-Ge stretching-mode fine structure in the investigated CGT.

Summary

In conclusion, we have conducted systematic RS investigations of the vibrational properties of CGT. All theoretically predicted phonon modes were observed at low temperatures (T=5T=5 K), in agreement with the calculated phonon dispersion. Temperature-dependent Raman spectroscopy revealed two distinct phase transitions: a transition from the ferromagnetic to an intermediate phase at approximately 60 K, and a subsequent transition to the paramagnetic phase around 150 K. These phase transitions are reflected not only in the phonon energies but also in the linewidths and intensities of the Raman modes. We analyze the spin-phonon coupling responsible for the observed energy shifts. Furthermore, the observed Ag5A_g^{5} fine structure has been successfully simulated using a model that takes into account vibrations of Ge-Ge pseudomolecules for various Ge isotopes.

Methods

To synthesize single CGT crystals, we employed a self-flux method, leveraging a germanium-tellurium rich flux, based on established procedures [37]. All precursor handling occurred within an M-Braun glovebox, maintained in a rigorously controlled argon atmosphere (H2O\mathrm{H}_{2}\mathrm{O} and O2\mathrm{O}_{2} levels below 0.1 ppm). A mixture of chromium granules (4N purity, Thermo Fisher), germanium (4N purity, ChemPur), and tellurium lumps (5N purity, Alfa Aesar) was combined in a 10:13:77 molar ratio (Cr:Ge:Te) and loaded into an alumina crucible. This crucible was then sealed within a 19 mm diameter fused-silica tube under a partial argon atmosphere (approximately 400 mbar). The crystal growth process involved a carefully controlled thermal profile: the ampoule was heated to 1000°C over 6 hours, kept at this temperature for 24 hours to ensure thorough mixing and dissolution, and subsequently cooled to 450°C at a rate of 2°C per hour. At 450°C, the excess Ge-Te flux was decanted by centrifugation, revealing plate-like millimeter-sized CGT crystals. The crystal structure was determined using single-crystal X-ray diffraction, and the results, which align well with previously reported data [4, 38], are discussed in a different publication [39].

The CGT flakes were placed on a Si/(300 nm)SiO2_{2} substrate by polydimethylsiloxane (PDMS)-based exfoliation [40] of the bulk crystals. The PDMS stamp was prepared from the gel-film purchased from Gel-Pak. The flakes of interest were initially identified by visual inspection under an optical microscope and then subjected to atomic force microscopy, confirming their thicknesses.

The RS experiments were conducted using a series of laser excitations: λ=405\lambda= 405 nm (3.06 eV), λ=515\lambda= 515 nm (2.41 eV), λ=561\lambda= 561 nm (2.21 eV), λ=633\lambda= 633 nm (1.96 eV), and λ=785\lambda= 785 nm (1.58 eV). The excitation power focused on the sample was kept at approx. 1 mW in all investigations. The measurements were performed with excitation light focused using a 50× long-working-distance objective with a numerical aperture (NA) of 0.55, producing a spot diameter of approximately 1 μ\mum. The signal was collected in backscattering geometry through the same microscope objective and dispersed by a spectrometer with a focal length of 0.75 m and 1800 g/mm holographic grating. Finally, the light was collected using a liquid-nitrogen-cooled charge-coupled device (CCD) camera. All measurements, including temperature-dependent experiments in the range from T=5T=5 K to 300 K, were done by placing the sample on a cold finger in a continuous flow cryostat mounted on x–y motorized positioners. Polarization-sensitive RS measurements were carried out in two configurations: co-linear (XX) and cross-linear (XY), corresponding to parallel and perpendicular orientations of the excitation and detection polarization axes, respectively. The RS signal analysis was employed using a motorized half-wave plate mounted in the detection path. To measure low-energy Raman scattering (below 50 cm−1^{-1} from the laser line), a set of Bragg-grating Notch filters was incorporated into the detection paths.

DFT calculations were performed in Vienna ab-initio simulation package (VASP) version 6.4.2 [41, 42]. The projector augment wave (PAW) potentials Crpv_{pv}, Ged_{d} and Te with Pedew-Burke-Ernzerhof (PBE) parametrization of the general gradients approximation (GGA) to the exchange-correlation functional were used [43]. The unit cell parameters and atomic positions were optimized with criteria of 10−510^{-5} eV/Å for forces and 0.1 kbar for stresses, including the D3 correction to van der Waals interactions [44]. An energy cut-off of 400 eV and a 6×6×6 Γ\Gamma-centered k-points grid were used. The GGA+U approximation with effective Hubbard parameter U=1 eV was employed to properly model the ferromagnetic order of the magnetic moments of Cr atoms [45]. Phonon calculations were performed within the direct method as implemented in Phonopy [46, 47, 48]. A 2×2×2 supercell was used to evaluate the interatomic force constants.

Data availability

The datasets generated during and/or analysed during the current study are available in the U W Research Data repository, http://doi.org/XXX.

Funding

The work has been supported by the National Science Centre, Poland (Grant No. 2020/37/B/ST3/02311, 2023/48/C/ST3/00309, 2025/57/B/ST5/03288). DFT calculations have been carried out using computational resources of the Interdisciplinary Centre for Mathematical and Computational Modelling (ICM), University of Warsaw, under grant GB83-21.

Author contributions

G.K., K.O.-P., A.B., and M.R.M. performed the experiments. G.K. fabricated the samples with exfoliated flakes. T.W. carried out DFT calculations. M.I.S. and H.K. grew the CGT crystals. M.R.M. initiated and supervised the project. G.K., A.B., and M.R.M. wrote the manuscript with inputs from all co-authors.

Competing interests

The authors declare no competing interests.

References

Grzegorz Krasucki; Katarzyna Olkowska-Pucko; Tomasz Woźniak; Mihai I. Sturza; Holger Kohlmann; Adam Babiński; Maciej R. Molas

Optical and atomic force microscopy

Figure S7 (a) presents an atomic force microscopy (AFM) scan of the measured flake. This particular flake was used in the thickness-dependent study described in Section S5 of the Supplementary Information. Distinct terrace-like features can be clearly observed on the flake surface. To extract corresponding terrace heights, cross-section data profiles are shown in Figure S7(b). Although flakes as thin as 7 nm were successfully identified, it was extremely challenging to isolate thinner flakes with lateral dimensions exceeding 1 μm2\mu\mathrm{m}^{2}. Most of the exfoliated flakes exhibited thicknesses comparable to those of the second level of the main terrace, approximately 24 nm in height. Consequently, temperature- and polarization-dependent measurements were performed on a flake of this representative thickness.

Atomic force microscopy topography image and cross-section profiles of the exfoliated CGT flake

Figure S7. (a) Atomic force microscopy topography image measured on the exfoliated CGT flake, with two profiles. (b) Cross-section data cut from AFM map, alongside marked profiles. Light-blue line corresponds to profile 1 and orange line to profile 2. On the plot it is marked corresponding heights of layers.

Excitation energy influence on the CGT Raman spectra

The representative low temperature (T=5T=5 K) unpolarized Raman scattering (RS) spectra of Cr2Ge2Te6\mathrm{Cr}_2\mathrm{Ge}_2\mathrm{Te}_6 (CGT) crystals are presented in Figure S8. We comparatively inspect the intensity dependence of the Raman peaks on the laser energy, utilizing 1.58 eV, 1.96 eV, 2.21 eV, 2.41 eV, and 3.06 eV excitations. Note that the RS spectra were normalized to the theoretical sensitivity of the experimental setup used, i.e. reflection or transmission of optical elements (a beam splitter, mirrors, a lens, a long-pass filter), dispersion sensitivity of a grating in the spectrometer, and the efficiency of the CCD camera. The number of observed phonon peaks and their intensities in the RS spectra of CGT are substantially affected by the excitation energy used. For the 2.41 eV and 3.06 eV illuminations, only seven Raman modes can be easily resolved, while the 1.58 eV and 1.96 eV excitations allows us to unveil all the theoretically predicted phonon peaks, i.e. 10. The main difference between these two groups of the energies used originates from the increased spectral resolution of the experimental setup with the decreased excitation energy. In particular, the fine structure of the Ag5A_g^5 mode, apparent as a set of discrete narrow lines, can be observed and resolved only for the 1.58 eV and 1.96 eV lasers. Consequently, we decided to perform the following analysis of the phonon modes in the CGT crystal under the 1.58 eV illumination due to the highest possible spectral resolution of the Raman spectrum accompanied by its high intensity.

Raman Scattering spectra of the exfoliated 24-nm thick CGT flake measured at 5 K with different excitation energies

Figure S8. Raman Scattering spectra of the exfoliated 24-nm thick CGT flake measured at 5 K with different excitation energies: 1.58 eV, 1.96 eV, 2.21 eV, 2.41 eV, and 3.06 eV, using excitation power 1 mW. The spectra are vertically shifted for clarity and some of them are multiplied by scaling factors to make them better visible.

Polarization dependence of the CGT Raman spectra

Figure S9 shows the false-color map of the polarization-sensitive RS spectra measured on the 24-nm thick CGT flake. Two types of Raman peaks are seen in the Figures. The peaks ascribed to the AgA_g modes are characterized by a strong dependence on the relative alignment of the excitation and detection polarization, leading to their appearance only for the co-linear configuration (XX). For the EgE_g peaks, they are visible in both co- (XX) and cross-linear (XY) configurations.

False-color map of polarization-sensitive Raman spectra and corresponding room-temperature spectra

Figure S9. (a) False-color map of the polarization sensitive RS spectra measured on the exfoliated 24-nm thick CGT flake at 5 K under excitation energy 1.58 eV and excitation power of 1 mW. The white horizontal dot lines denote the co-linear (XX) and cross-linear (XY) polarizations. (b) The corresponding RS spectra of the same CGT flake measured at 300 K in the energy range of the Eg3E_g^3 and Ag2A_g^2 peaks with XX and XY polarizations.

To unveil the polarization dependences in the vicinity of Eg3E_g^3 and Ag2A_g^2 peaks, exhibiting nearly degenerate energies at 5 K, we measured the polarization-resolved RS spectra of these modes at room temperature, see Figure S9. The energy overlap of the Eg3E_g^3 and Ag2A_g^2 modes is much smaller at 300 K, and hence two well-resolved lines are distinguishable, even in the XX configuration. Comparison of RS spectra in the XX and XY orientations results in a straightforward assignment of the apparent peaks to the Eg3E_g^3 and Ag2A_g^2 modes.

Analysis of the temperature evolutions the Raman peaks

In the temperature evolution of the RS energies, several distinct behaviors can be identified. Within the ferromagnetic phase, the mode energies remain highly stable, exhibiting minimal temperature dependence. The Ag5A_g^5 mode in this regime displays its characteristic fine peak structure. Above the Curie temperature TCT_C, multiple types of behavior emerge. The Ag4A_g^4 mode cannot be identified anymore. The Eg2E_g^2, Ag3A_g^3, and Eg4E_g^4 modes exhibit a rapid, step-like redshift in energy, indicative of a strong positive SPC constant. The Ag1A_g^1 mode unexpectedly shows a slight blueshift to T∗T^*. The fine structure of the Ag5A_g^5 mode gradually diminishes above TCT_C, with the intermediate array of peaks (colored green in Figure S10) becoming unresolvable.

Temperature evolutions of the Raman shifts of the all investigated Raman modes measured on the exfoliated 24-nm thick CGT flake

Figure S10. Temperature evolutions of the Raman shifts of the all investigated Raman modes measured on the exfoliated 24-nm thick CGT flake. The black vertical dash-dot line corresponds to the Curie temperature (TCT_C), while the red vertical doted line denote the second phase change temperature (T∗T^*). The gray curves are result of fitting using Balkanski model (Eq. (1) in the main text) to the data measured only above the T∗T^*, i.e. in the paramagnetic phase.

The Eg1E_g^1, Eg3E_g^3, Ag2A_g^2, and Eg5E_g^5 modes show only a light change immediately after the phase transition, followed by a gradual redshift, consistent with expectations from phonon–phonon anharmonic scattering. At temperatures above T∗T^*, the material enters a purely paramagnetic phase, and the energies of all Raman modes exhibit an anharmonic redshift. In this regime, the Ag5A_g^5 mode’s fine structure collapses into a single broad band.

We fitted the high-temperature data in the paramagnetic phase using the Balkanski model (presented in the main text), as indicated by the gray curves in Figure S10. Interestingly, the Eg3E_g^3, Ag2A_g^2, and Eg5E_g^5 modes, although exhibiting an apparently normal redshift, display a smaller energy shift than predicted by anharmonic scattering alone. This reduction in redshift may be a consequence of a negative SPC constant. Overall, the temperature dependence of the Raman mode energies reveals clear signatures of phase transitions driven by spin–phonon coupling.

We calculated the spin-phonon coupling constants on the basis of Eq. (2) in the main text. The extracted values are summarized in Table SI. The coupling factors were successfully extracted for almost all modes, with two exceptions. For the Ag4A_g^4 mode, which disappears after the TCT_C transition, it was not possible to determine the coupling constant. Similarly, for the Ag5A_g^5 mode in the ferromagnetic phase, the presence of a fine energy structure prevented the unambiguous selection of a single representative energy level for the calculation. For the remaining modes, our results are largely consistent with those reported by Tian et al. [15] for Eg4E^{4}_{g} and Ag3A^{3}_{g}. The Eg3E^{3}_{g} mode exhibits a more pronounced deviation. Due to the reported λ\lambda values in Ref. [18] have large uncertainties, it makes their comparison with our extracted values impractical.

Phonon modλ\lambda (cm−1^{-1})λ1\lambda_{1} (cm−1^{-1}) from Ref. 15λ2\lambda_{2} (cm−1^{-1}) from Ref. 18
Ag1A^{1}_{g}-0.34283
Eg1E^{1}_{g}0.01018-0.4
Eg2E^{2}_{g}0.78144-0.33
Ag2A^{2}_{g}-0.22347-0.52
Eg3E^{3}_{g}-0.085670.24
Ag3A^{3}_{g}0.148730.32-0.48
Eg4E^{4}_{g}0.821291.20-0.75
Eg5E^{5}_{g}-0.12279

Table S1. Spin-phonon coupling parameter calculated from fitting parameters of curves seen in S10. In latter columns are spin-phonon coupling factors found in literature, λ1\lambda_{1} from Ref. 15 and λ2\lambda_{2} from Ref. 18.

The temperature dependence of the linewidths, presented in Figure S11, further supports these observations. For almost all modes, a pronounced broadening occurs at the phase transition. In particular, the Eg1E^{1}_{g}, Eg2E^{2}_{g}, Eg3E^{3}_{g}, Ag2A^{2}_{g}, Ag3A^{3}_{g}, and Eg4E^{4}_{g} modes show a clear step-like increase in linewidth at TCT_{C}. In particular, the Eg1E^{1}_{g} mode, one of the few modes without a detectable SPC effect in its energy evolution, displays a strong SPC-related response in its linewidth behavior. Due to its disappearance above TCT_{C}, the Ag4A^{4}_{g} mode could not be analyzed in this respect. The Ag1A^{1}_{g} mode also shows an additional increase in linewidth above T∗T^{*}, similar to the Ag5A_{\mathrm{g}}^{5} mode. This suggests that these modes are particularly sensitive to residual magnetic domains that persist above TCT_{\mathrm{C}}.

Temperature evolutions of the linewidths of all investigated Raman modes

Figure S11. Temperature evolutions of the linewidths of the all investigated Raman modes measured on the exfoliated 24-nm thick CGT flake. The black vertical dash-dot line corresponds to the Curie temperature (TCT_{C}), while the red vertical doted line denote the second phase change temperature (T∗T^{*}).

As seen in Figure S12, within the ferromagnetic phase, the intensities of most Raman modes remain relatively stable, exhibiting no significant variations. Upon entering the intermediate phase, just above the Curie temperature TCT_{\mathrm{C}}, many modes experience a rapid decrease in intensity. This reduction is particularly pronounced for the Ag1A_{\mathrm{g}}^{1}, Ag2A_{\mathrm{g}}^{2}, Ag3A_{\mathrm{g}}^{3}, Eg5E_{\mathrm{g}}^{5}, Ag5A_{\mathrm{g}}^{5}, and Ag4A_{\mathrm{g}}^{4} modes, with the latter disappearing entirely. This trend indicates that the intensities of the AgA_{\mathrm{g}} modes are generally more sensitive to the TCT_{\mathrm{C}} transition. In contrast, the Eg1E_{\mathrm{g}}^{1} and Eg3E_{\mathrm{g}}^{3} modes display a more gradual decrease in intensity.

Temperature evolutions of the intensities of the investigated Raman modes

Figure S12. Temperature evolutions of the intensities of the all investigated Raman modes measured on the exfoliated 26-nm thick CGT flake. The black vertical dash-dot line corresponds to the Curie temperature (TCT_{\mathrm{C}}), while the red vertical doted line denote the second phase change temperature (T∗T^{*}).

Within the intermediate phase, the Ag1A_{\mathrm{g}}^{1}, Eg1E_{\mathrm{g}}^{1}, Eg3E_{\mathrm{g}}^{3}, and Ag2A_{\mathrm{g}}^{2} modes maintain a nearly constant intensity, whereas the Eg2E_{\mathrm{g}}^{2}, Ag3A_{\mathrm{g}}^{3}, Eg4E_{\mathrm{g}}^{4}, Eg5E_{\mathrm{g}}^{5}, and Ag5A_{\mathrm{g}}^{5} modes show a steady decline up to T∗T^{*}. Upon entering the purely paramagnetic phase above TCT_{\mathrm{C}}, the intensities of all modes increase sharply, highlighting the influence of residual magnetic domains in the intermediate phase on the Raman scattering intensity.

Atomic displacements of Ag5\mathrm{A}_{g}^{5}

To validate the approximation of the Ag5\mathrm{A}_{g}^{5} Raman mode as an isolated Ge–Ge pseudo-molecular vibration, the Γ\Gamma-point phonon eigenvector was extracted from density functional theory (DFT) calculations, and the corresponding atomic displacement amplitudes were quantified. As summarized in Table SII, the vibrational dynamics are overwhelmingly dominated by the central Ge–Ge pair. The normalized displacement amplitude for each Ge atom is ∼0.697\sim0.697, whereas the surrounding Te and Cr atoms exhibit substantially smaller displacements of ∼0.068\sim0.068 and ∼0.005\sim0.005, respectively. The Ge atomic displacements are thus roughly an order of magnitude larger than those of Te and more than two orders of magnitude larger than those of Cr. Furthermore, the Cartesian components of the calculated eigenvectors reveal that the two Ge atoms oscillate in anti-phase (moving in equal and opposite directions along the Ge–Ge bond axis), directly confirming a pure Ge–Ge stretching character. The negligible involvement of the surrounding Cr and Te sublattices confirms that host lattice interactions contribute minimally to this mode, providing direct microscopic justification for treating the Ag5\mathrm{A}_{g}^{5} vibration within an effective diatomic Ge–Ge pseudo-molecular framework.

xyzmagnitude
Cr0.0043720.0022240.0015070.00513096
Cr-0.00437-0.00222-0.001510.00513096
Ge-0.59407-0.30217-0.204760.69725063
Ge0.5940730.3021740.2047610.69725063
Te-0.046030.04944-0.006490.06786082
Te0.046029-0.049440.0064860.06786076
Te-0.01717-0.044440.0483230.06786069
Te0.0171660.044444-0.048320.06786071
Te0.012851-0.0306-0.059190.06786065
Te-0.012850.0306040.0591890.06786069

Table SII. Cartesian coordinates and magnitude of atomic displacements in Ag5\mathrm{A}_{g}^{5} mode.

Thickness evolution of Raman spectra

Figure S13 presents Raman spectra from four flakes of different thicknesses, as measured by AFM in Section S1 of the SI. The thinnest flake, with a thickness of 7 nm, exhibits a higher overall spectral intensity compared to the 31 nm flake. This is precisely why the thinner flake was selected for the analysis of the fine structure of the Ag5A_{g}^{5} mode, since the intensity of the intermediate peaks within that structure was also enhanced.

Raman spectra of exfoliated thick CGT flakes with thicknesses of 7 nm, 15 nm, 24 nm, and 31 nm

Figure S13. RS spectra of the exfoliated thick CGT flakes with thicknesses: 7 nm, 15 nm, 24 nm, and 31 nm measured at 5 K with excitation energy 1.58 eV and excitation power 1 mW. The spectra are vertically shifted for clarity.

Theoretical simulation of the Ag5A_g^5 fine structure

As described in the main text, the observed fine structure of the Ag5A_g^5 mode can be explained in terms of the Ge isotopes. Therefore, we propose the following model. Due to the pseudo-molecule vibration of the Ge-Ge pair, we used the simple approach with two single-point masses connected by a spring. In this framework, the energy of the given vibration (in cm−1^{-1}) is given by

E=K4μπ2c2(3)E = \sqrt{\frac{K}{4\mu\pi^2c^2}} \tag*{(3)}

where KK is the force constant, μ\mu is the mass, and cc is the light velocity. Note that such a model is typically applied to describe the so-called shear and breathing interlayer vibrations in thin layers on van der Waals materials, e.g. transition metal dichalcogenides [49, 50, 51]. In our simulations, we have made subsequent steps. There are five isotopes apparent in natural Ge, 70, 72, 73, 74, and 76, with their corresponding abundances, 20.38%, 27.31%, 7.76%, 36.72%, and 7.83% [33]. Two kinds of Ge-Ge pairs are possible: five modes with the same isotope (70-70, 72-72, 73-73, 74-74, and 76-76) and ten modes with two different isotopes (70-72, 70-73, 70-74, 70-76, 72-73, 72-74, 72-76, 73-74, 73-76, and 74-76). Taking into account that EE is inversely proportional to μ\sqrt{\mu}, we calculate the relative energy for different combinations of two Ge-Ge atoms with μ\mu assumed as a reduced mass of two atoms (labeled aa and bb) and reads μ=ma∗mb/(ma+mb)\mu= m_a * m_b/(m_a + m_b). The relative intensity of each vibration was taken as probability of occurrence for peculiar pairs (the abundances squared for the same isotope, the product of abundance times two for dissimilar isotopes. As the calculated energy of the spectrum is relative, we shifted its energy in a way that the energy of the 74-74 vibration matches the experimental energy of peak 1 from the Ag5A_g^5 mode (see Figure 6 in the main text). The determined spectrum of the Ag5A_g^5 fine structure composed of 15 peaks is shown in Figure S14(a). In the final step, we simulate the Raman spectrum of the Ag5A_g^5 mode assuming the Lorentz distribution of a given peak with input of its frequency and intensity from Figure S14(a) and the determined experimental linewidth of 0.4 cm−1^{-1}, which is presented in Figure S14(b).

Theoretical simulation of the RS spectrum of the $A_g^5$ mode including the isotopes related band structure

Figure S14. Theoretical simulation of the RS spectrum of the Ag5A_g^5 mode including the isotopes related band structure: (a) without and (b) with additional broadening of the phonon modes.

References

  1. [1]A. Hoffmann and S. D. Bader, Physical Review Applied 4, 047001 (2015).
  2. [2]M. Gibertini, M. Koperski, A. F. Morpurgo, and K. S. Novoselov, Nature Nanotechnology 14, 408 (2019).
  3. [3]E. Elahi, G. Dastgeer, G. Nazir, S. Ismar, M. Bashir, H. A. Qureshi, D.-k. Kim, J. Aziz, M. Aslam, K. Hussain, et al., Computational Materials Science 213, 111670 (2022).
  4. [4]V. Carteaux, D. Brunet, G. Ouvrard, and G. Andre, Journal of Physics: Condensed Matter 7, 69 (1995).
  5. [5]H. Ji, R. A. Stokes, L. D. Alegria, E. C. Blomberg, M. A. Tanatar, A. Reijnders, L. M. Schoop, T. Liang, R. Prozorov, K. S. Burch, N. P. Ong, J. R. Petta, and R. J. Cava, Journal of Applied Physics 114, 114907 (2013).
  6. [6]X. Zhang, Y. Zhao, Q. Song, S. Jia, J. Shi, and W. Han, Japanese Journal of Applied Physics 55, 033001 (2016).
  7. [7]C. C. Gong, L. Li, Z. Li, H. Ji, A. Stern, X. Xia, T. Cao, W. Bao, C. Wang, Y. Wang, Z. Q. Qiu, R. J. Cava, S. G. Louie, J. Xia, and X. Zhang, Nature 546, 265 (2017).
  8. [8]I. A. Verzhbitsky, H. Kurebayashi, H. Cheng, J. Zhou, S. Khan, Y. P. Feng, and G. Eda, Nature Electronics 3, 460 (2020).
  9. [9]W. Xing, Y. Chen, P. M. Odenthal, X. Zhang, W. Yuan, T. Su, Q. Song, T. Wang, J. Zhong, S. Jia, X. C. Xie, Y. Li, and W. Han, 2D Materials 4, 024009 (2017).
  10. [10]W. Zhuo, B. Lei, S. Wu, F. Yu, C. Zhu, J. Cui, Z. Sun, D. Ma, M. Shi, H. Wang, W. Wang, T. Wu, J. Ying, S. Wu, Z. Wang, and X. Chen, Advanced Materials 33, 2008586 (2021).
  11. [11]M. Šikšins, S. Kurdi, M. Lee, B. J. M. Slotboom, W. Xing, S. Mañas-Valero, E. Coronado, S. Jia, W. Han, T. van der Sar, H. S. J. van der Zant, and P. G. Steeneken, npj 2D Materials and Applications 6, 41 (2022).
  12. [12]Z. Lin, M. Lohmann, Z. A. Ali, C. Tang, J. Li, W. Xing, J. Zhong, S. Jia, W. Han, S. Coh, W. Beyermann, and J. Shi, Phys. Rev. Matter 2, 051004 (2018).
  13. [13]Y. Sun, R. C. Xiao, G. T. Lin, R. R. Zhang, L. S. Ling, Z. W. Ma, X. Luo, W. J. Lu, Y. P. Sun, and Z. G. Sheng, Applied Physics Letters 112, 072409 (2018).
  14. [14]E. Dong, B. Liu, Q. Dong, X. Shi, X. Ma, R. Liu, X. Zhu, X. Luo, X. Li, Y. Li, Q. Li, and B. Liu, Physica B: Condensed Matter 595, 412344 (2020).
  15. [15]Y. Tian, M. J. Gray, H. Ji, R. J. Cava, and K. S. Burch, 2D Materials 3, 025035 (2016).
  16. [16]S. Samanta, H. Iturriaga, T. T. Mai, A. J. Biacchi, R. Islam, J. Fullerton, A. R. Hight Walker, M. Noufal, R. Siebenaller, E. Rowe, C. Phatak, M. A. Susner, F. Xue, and S. R. Singamaneni, Nano Letters 24, 9169 (2024).
  17. [17]Z. Huang, A. R. C. McCray, Y. Li, D. J. Morrow, E. K. Qian, D. Young Chung, M. G. Kanatzidis, C. Phatak, and X. Ma, Nano Letters 24, 1531 (2024).
  18. [18]A. G. Chakkar, D. Kumar, and P. Kumar, Phys. Rev. B 109, 134406 (2024).
  19. [19]H. Idzuchi, A. E. Llacshahuanga Allcca, A. K. A. Lu, M. Saito, S. Das, J. F. Ribeiro, M. Houssa, R. Meng, K. Inoue, X.-C. Pan, K. Tanigaki, Y. Ikuhara, T. Nakanishi, and Y. P. Chen, Phys. Rev. B 111, L020402 (2025).
  20. [20]A. Łapińska, A. Taube, J. Judek, and M. Zdrojek, The Journal of Physical Chemistry C 120, 5265 (2016).
  21. [21]A. T. Burujiana, A. E. Bocirnea, A. C. Kuncser, T. Tite, E. Matei, C. Mihai, N. Zawadzka, K. Olkowska-Pucko, Ł. Kipczak, A. Babiński, M. R. Molas, A. Velea, and A. C. Galca, Applied Surface Science 599, 153983 (2022).
  22. [22]Z. Muhammad, G. Hussain, R. Islam, N. Zawadzka, M. S. Hossain, O. Iqbal, A. Babiński, M. R. Molas, F. Xue, Y. Zhang, M. Z. Hasan, and W. Zhao, Advanced Functional Materials 34, 2316775 (2024).
  23. [23]S. Spachmann, A. Elghandour, S. Selter, B. Büchner, S. Aswartham, and R. Klingeler, Physical Review Research 4, L022040 (2022).
  24. [25]D. P. Kozlenko, O. N. Lis, S. E. Kichanov, E. V. Lukin, N. M. Belozerova, and B. N. Savenko, npj Quantum Materials 6, 19 (2021).
  25. [26]M.-G. Han, J. A. Garlow, Y. Liu, H. Zhang, J. Li, D. Di-Marzio, M. W. Knight, C. Petrovic, D. Jariwala, and Y. Zhu, Nano Letters 19, 7859 (2019).
  26. [27]H.-J. Koo, R. K. Kremer, and M.-H. Whangbo, Journal of the American Chemical Society 144, 16272 (2022).
  27. [28]B. Singh, D. Kumar, K. Manna, A. Bera, G. A. Cansever, A. Maljuk, S. Wurmehl, B. Büchner, and P. Kumar, Journal of Physics: Condensed Matter 31, 485803 (2019).
  28. [29]Ł. Kipczak, A. Karmakar, M. Grzeszczyk, R. Janiszewska, T. Woźniak, Z. Chen, J. Pawłowski, K. Watanabe, T. Taniguchi, A. Babiński, M. Koperski, and M. R. Molas, Scientific Reports 14, 7484 (2024).
  29. [30]A. Pawbake, T. Pelini, N. P. Wilson, K. Mosina, Z. Sofer, R. Heid, and C. Faugeras, Phys. Rev. B 107, 075421 (2023).
  30. [31]L. Chen, G. Ye, C. Nnokwe, X.-C. Pan, K. Tanigaki, G. Cheng, Y. P. Chen, J. Yan, D. G. Mandrus, A. E. Llacashuanga Allcca, N. Giles-Donovan, R. J. Birgeneau, and R. He, Nat. Commun. 16, 5795 (2025).
  31. [32]M. Cardona and M. L. W. Thewalt, Rev. Mod. Phys. 77, 1173 (2005).
  32. [33]J. R. de Laeter, J. K. Böhlke, P. De Bièvre, H. Hidaka, H. S. Peiser, K. J. R. Rosman, and P. D. P. Taylor, UPAC Technical Report 75, 683 (2003).
  33. [34]P. Empedocles, The Journal of Chemical Physics 46, 4474 (1967).
  34. [35]A. B. Anderson, The Journal of Chemical Physics 63, 4430 (1975).
  35. [36]A. J. Mayur, M. D. Sciacca, M. K. Udo, A. K. Ramdas, K. Itoh, J. Wolk, and E. E. Haller, Phys. Rev. B 49, 16293 (1994).
  36. [37]J. Z. Jeizer, A. Alfonsov, S. Selter, S. Aswartham, M. P. Ghimire, M. Richter, J. van den Brink, B. Büchner, and V. Kataev, Phys. Rev. B 99, 165109 (2019).
  37. [38]D. Yang, W. Yao, Q. Chen, K. Peng, P. Jiang, X. Lu, C. Uher, T. Yang, G. Wang, and X. Zhou, Chemistry of Materials 28, 1611 (2016).
  38. [39]A. Abadia-Huguet, E. Mendive-Tapia, E. Stern-Taulats, A. Planes, B. Eggert, H. Wende, M. Acet, M.-I. Sturza, H. Kohlmann, M. V. Costache, and L. Mañosa, Applied Materials Today 44, 102749 (2025).
  39. [40]A. Castellanos-Gomez, M. Busemca, R. Molenaar, V. Singh, L. Janssen, H. S. J. van der Zant, and G. A. Steele, 2D Materials 1, 011002 (2014).
  40. [41]G. Kresse and J. Furthmüller, Computational Materials Science 6, 15 (1996).
  41. [42]G. Kresse and J. Furthmüller, Phys. Rev. B 54, 11169 (1996).
  42. [43]G. Kresse and D. Joubert, Phys. Rev. B 59, 1758 (1999).
  43. [44]S. Grimme, J. Antony, S. Ehrlich, and H. Krieg, The Journal of Chemical Physics 132, 154104 (2010).
  44. [45]S. Kang, S. Kang, and J. Yu, Journal of Electronic Materials 48, 1441 (2019).
  45. [46]K. Parlinksi, Z. Q. Li, and Y. Kawazoe, Phys. Rev. Lett. 78, 4063 (1997).
  46. [47]A. Togo, J. Phys. Soc. Jpn. 92, 012001 (2023).
  47. [48]A. Togo, L. Chaput, T. Tadano, and I. Tanaka, J. Phys. Condens. Matter 35, 353001 (2023).
  48. [49]G. Froehlicher, E. Lorchat, F. Fernique, C. Joshi, A. Molina-Sánchez, L. Wirtz, and S. Berciaud, Nano Letters 15, 6481 (2015).
  49. [50]M. Grzeszczyk, K. Gołasa, M. Zinkiewicz, K. Nogajewski, M. R. Molas, M. Potemski, A. Wysmołek, and A. Babiński, 2D Materials 3, 025010 (2016).
  50. [51]Ł. Kipczak, M. Grzeszczyk, K. Olkowska-Pucko, A. Babiński, and M. R. Molas, Journal of Applied Physics 128, 044302 (2020).

Paper details

vlnc:W_g6kfveme
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents