betaFeedback

WorksPhysics and Astronomy

Approximate Expressions for the Capillary Force and the Surface Area of a Liquid Bridge between Identical Spheres

Abstract

We consider a liquid bridge between two identical spheres and provide approximate expressions for the capillary force and the exposed surface area of the liquid bridge as functions of the liquid bridge's total volume and the sphere separation distance. The radius of the spheres and the solid-liquid contact angle are parameters that enter the expressions. These expressions are needed for efficient numerical simulations of drying suspensions.

Introduction

In a certain approximation, drying suspensions can be modeled as identical spheres that are pairwise connected by liquid bridges exerting forces on the particles [1, 2, 3, 4, 5]. The liquid bridges change over time due to diffusion, thus, the forces are time-dependent, resulting in complex phenomena such as fragmentation[6, 7, 8, 9]. If we consider the radius of the spheres, RR, and the solid-liquid contact angle, θ\theta, as invariant material parameters, the shape of a liquid bridge of a given volume, VV, spanning between the spheres of separation distance SdS_d is provided by the solution of the Young-Laplace equation[10]. Therefore, the total area of the exposed surface of a liquid bridge, AA, and the capillary force are functions of VV and SdS_d. The evolution of the capillary force is thus determined by the evaporation rate, which in turn depends on AA.

For the numerical simulation of macroscopic systems of drying suspension with millions of liquid bridges, we need an efficient way to compute the capillary force exerted by a liquid bridge and its exposed surface area as functions of the liquid volume and the distance of the spheres. While the straightforward computation of these quantities requires the numerical solution of a partial differential equation, the current paper presents corresponding approximations suitable for Discrete Element Method (DEM) and Molecular Dynamics (MD) simulations.

Our approach is based on the numerical solution of the Young-Laplace equation. Several approximate solutions of the Young-Laplace equation have been described in the literature. These approximations aim to simplify the mathematical representation of the shape of the liquid bridge[11, 12, 13, 14, 15, 16]. However, none of them facilitates the forward calculation of the capillary force and the free surface of the bridge as functions of the liquid volume and the distance between the surfaces the liquid bridge spans.

Problem Description

Consider the situation sketched in Figure 1: A liquid bridge spans between two spheres of radius RR and distance SdS_d. Liquid bridges between spheres can be attractive or repulsive, depending on the total volume and the boundary conditions. For application in drying suspension, attractive forces are relevant. In this case, the analysis simplifies since surface tension enforces an axisymmetric shape of the liquid bride, as sketched in Figure 1. This is different for the bulbous shape of the liquid bridge (large volume) where the static solution can be asymmetric[17]. This case is not considered here. Also, the influence of gravity shall be neglected.

Shape of a liquid bridge between two identical spheres

Figure 1. The shape of a liquid bridge between two identical spheres of radius RR and distance SdS_d is a solution of the Young-Laplace equation with the solid-liquid contact angle, θ\theta, the half-filling angle, φ\varphi, the surface tension coefficient, γ\gamma. RmR_m and RaR_a are meridian and azimuth radii, respectively.

The force exerted by the liquid bridge on the spheres results from two contributions: the xx-component of the surface tension and the xx-component of the hydrostatic pressure acting on the liquid bridge. For the evaluation of the force, we are free to choose any xx-position, however, without knowing the shape of the liquid bridge, the projections can be evaluated only at the three-phase contact, x=±xcx = \pm x_c. Here we have the force

Fγ=γ2πRsin⁡φ(1)F_{\gamma} = \gamma2\pi R \sin\varphi \tag*{(1)}

acting tangential to the bridge, where φ\varphi is the half-filling angle. Its xx-component reads

Fγx=2πγRsin⁡φsin⁡(φ+θ),(2)F_{\gamma}^{x} = 2\pi\gamma R \sin\varphi\sin(\varphi+ \theta), \tag*{(2)}

with the fluid-solid contact angle θ\theta. The xx-component of the force due to the hydrostatic pressure reads

FΔpx=πR2Δpsin⁡2φ,(3)F_{\Delta p}^{x} = \pi R^{2}\Delta p\sin^{2}\varphi, \tag*{(3)}

where Δp\Delta p is the pressure drop at the air-liquid interface. We relate these forces to the characteristic force, γR\gamma R, and obtain the total dimensionless force

F∗≡1γR(Fγx+FΔpx)=2πsin⁡φsin⁡(φ+θ)+πsin⁡2φΔpRγ.(4)F^{*} \equiv\frac{1}{\gamma R}\left(F_{\gamma}^{x}+F_{\Delta p}^{x}\right)=2\pi\sin\varphi\sin(\varphi+\theta)+\pi\sin^{2}\varphi\frac{\Delta p R}{\gamma}. \tag*{(4)}

The superscript “*” refers to dimensionless quantities here and in the following. The pressure drop follows from the Young-Laplace equation, which relates the pressure difference to the shape of the surface, characterized by its mean curvature, HH:

Δp=γH.(5)\Delta p=\gamma H. \tag*{(5)}

Therefore,

H∗≡H1R=ΔpRγ.(6)H^{*}\equiv\frac{H}{\frac{1}{R}}=\frac{\Delta p R}{\gamma}. \tag*{(6)}

Equation (4) for the dimensionless force between the spheres reads then

F∗=2πsin⁡φsin⁡(φ+θ)+πsin⁡2φH∗.(7)F^{*}=2\pi\sin\varphi\sin(\varphi+\theta)+\pi\sin^{2}\varphi H^{*}. \tag*{(7)}

For the axisymmetric liquid bridge, HH can be expressed through the radial extension of the bridge, y(x)y(x), see Figure 1[18]

H=d2y(x)dx2[1+(dy(x)dx)2]3/2−1y(x)1+(dy(x)dx)2.(8)H=\frac{\frac{\mathrm{d}^{2}y(x)}{\mathrm{d}x^{2}}}{\left[1+\left(\frac{\mathrm{d}y(x)}{\mathrm{d}x}\right)^{2}\right]^{3/2}}-\frac{1}{y(x)\sqrt{1+\left(\frac{\mathrm{d}y(x)}{\mathrm{d}x}\right)^{2}}}. \tag*{(8)}

The boundary conditions

dy(x)dx∣x=±xc=Rsin⁡φ\left.\frac{\mathrm{d}y(x)}{\mathrm{d}x}\right|_{x=\pm x_c}=R\sin\varphi
d2y(x)dx2∣x=±xc=±cot⁡(φ+θ)(9)\left.\frac{\mathrm{d}^2y(x)}{\mathrm{d}x^2}\right|_{x=\pm x_c}=\pm\cot\left(\varphi+\theta\right) \tag*{(9)}

are given at the three-phase contact points, x=±xcx=\pm x_c, with

xc=Sd2+R−Rcos⁡(φ).(10)x_c=\frac{S_d}{2}+R-R\cos(\varphi). \tag*{(10)}

Introducing the dimensionless coordinates, xc∗≡xc/Rx_c^*\equiv x_c/R and y∗(x)≡y(x)/Ry^*(x)\equiv y(x)/R, from the solution y(x)y(x) of Eq. (8), we obtain the dimensionless volume of the liquid bridge, V∗≡V/R3V^*\equiv V/R^3,

V∗=∫−xc∗xc∗π[y∗(x)]2dx∗−2π3(1−cos⁡φ)2(2+cos⁡φ).(11)V^*=\int_{-x_c^*}^{x_c^*}\pi\left[y^*(x)\right]^2\mathrm{d}x^*-\frac{2\pi}{3}(1-\cos\varphi)^2(2+\cos\varphi). \tag*{(11)}

The second term on the right-hand side is the volume of the two wet caps on each particle, which must be subtracted from the integral to obtain the liquid volume.

The dimensionless free surface area of the liquid bridge, A∗≡A/R2A^*\equiv A/R^2, is

A∗=∫−xc∗xc∗2πy∗(x)1+(dy∗(x)dx∗)2 dx∗.(12)A^*=\int_{-x_c^*}^{x_c^*}2\pi y^*(x)\sqrt{1+\left(\frac{\mathrm{d}y^*(x)}{\mathrm{d}x^*}\right)^2}\,\mathrm{d}x^*. \tag*{(12)}

Equations (8), (7), (11), and (12) establish a mathematical system that relates the force, F∗F^*, the volume, V∗V^*, and the accessible surface area, A∗A^*, of a liquid bridge to its profile. The coefficient of surface tension, γ\gamma, the contact angle, θ\theta, and the separation distance between the spheres, Sd∗≡Sd/RS_d^*\equiv S_d/R, enter as physical parameters. The radius, RR, of the spheres does not enter as all quantities are adimensionalized using RR as the characteristic length.

From this set of equations, in the following, we derive approximative expressions, F∗(Sd∗,V∗)F^*(S_d^*,V^*) and A∗(Sd∗,V∗)A^*(S_d^*,V^*), for use in efficient numerical simulations.

Results and discussion

Approximative expression A∗(Sd∗,V∗)A^*(S_d^*, V^*) for the accessible surface

Outline

Using the numerical scheme detailed in A, we solve numerically the Young-Laplace equation (8), where the scaled volume, V∗V^*, enters as a parameter. From the numerical results, step-by-step, we develop an approximation formula for the surface area of the liquid bridge as a function of the liquid volume, V∗V^*, and the distance between the spheres, Sd∗S_d^*. The contact angle, θ\theta, is the single parameter of the formula. In Sec. 3.1.2 we start with the case Sd∗=0S_d^*=0 and θ=0\theta=0 to obtain A∗(Sd∗,V∗)∣Sd∗=0; θ=0A^*(S_d^*,V^*)|_{S_d^*=0;\ \theta=0}. In Sec. 3.1.3 we release the constraint θ=0\theta=0 to find A∗(Sd∗,V∗)∣Sd∗=0A^*(S_d^*,V^*)|_{S_d^*=0}. Eventually, in Sec. 3.1.4, we also release the condition Sd∗=0S_d^*=0 to obtain our final result, A∗(Sd∗,V∗)A^*(S_d^*,V^*).

Surface area as a function of the volume for particle separation Sd∗=0S_d^*=0 and contact angle θ=0\theta=0

We start with the special case of vanishing separation distance, Sd∗=0S_d^*=0, and contact angle, θ=0\theta=0. Figure 2a shows the half-filling angle, φ\varphi, as a function of the volume, V∗V^*. The numerical data points agree perfectly with the results by Lian and Seville [19], supporting the validity of our simulation method.

The surface area as a function of volume follows a power law with a small correction, see fig:2b. The best fit up to the second order in ln⁡V∗\ln V^* is

ln⁡A∗(Sd∗,V∗)∣Sd∗=0; θ=0=0.000734(ln⁡V∗)2+0.771ln⁡V∗+2.107.(13)\ln A^*(S_d^*,V^*)|_{S_d^*=0;\ \theta=0}=0.000734(\ln V^*)^2+0.771\ln V^*+2.107. \tag*{(13)}

As a side product, we also obtain the dimensionless mean curvature as a function of the volume, H∗(Sd∗,V∗)∣Sd∗=0; θ=0H^*(S_d^*,V^*)|_{S_d^*=0;\ \theta=0}, shown in Figure 3, together with the fit

Figure 3. Dimensionless mean curvature as a function of the volume, H∗(Sd∗,V∗)∣Sd∗=0;θ=0H^*(S_d^*,V^*)|_{S_d^*=0;\theta=0}. The lines show the fit formula, Eq. (14), and the fit by Lian and SevilleRef. 19

Figure 2. Numerical results for Sd∗=0S_d^*=0 and θ=0\theta=0. (a) Half-filling angle as a function of the volume, φ(V∗)\varphi(V^*) together with the approximation Eq. (11) in Ref. 19. (b) The surface area of the liquid bridge as a function of the volume, A∗(Sd∗,V∗)∣Sd∗=0;θ=0A^*(S_d^*,V^*)|_{S_d^*=0;\theta=0}, and the fit formula Eq. (13)

H∗(Sd∗,V∗)∣Sd∗=0;θ=0=1.09ln⁡V∗−0.5076−2.25(14)H^*(S_d^*,V^*)|_{S_d^*=0;\theta=0}=1.09\ln V^{*-0.5076}-2.25 \tag*{(14)}

which slightly improves the fit in Ref. 19 and is, moreover, algebraically simpler.

Surface area as a function of the volume for particle separation Sd∗=0S_d^* = 0

When changing the contact angle, θ\theta, keeping the liquid volume fixed, the half-filling angle, φ\varphi, and the mean curvature, H∗H^*, change correspondingly, see Figure 4. Figure 5 quantifies this effect.

Figure 4. Profiles of a liquid bridge of volume V∗=0.1V^* = 0.1, spanning between two spheres in contact (Sd∗=0S_d^* = 0). When keeping the volume invariant, varying the contact angle θ∈{0,15∘,30∘,45∘}\theta\in\{0, 15^\circ, 30^\circ, 45^\circ\} leads to corresponding changes in the half-filling angle, φ\varphi, and the mean curvature, H∗∣Sd∗=0H^*|_{S_d^*=0}. The spheres are partially shown in grey.

Normalized half-filling angle and mean curvature for liquid bridges between spheres in contact

Figure 5. Numerical results for liquid bridges between spheres in contact, Sd∗=0S_d^*=0, and constant volume, V∗∈{10−6,10−3,10−2,10−1}V^* \in\{10^{-6},10^{-3},10^{-2},10^{-1}\}. (a) normalized half-filling angle as a function of the contact angle, φ(Sd∗,V∗)∣Sd∗=0/φ(Sd∗,V∗)∣Sd∗=0;θ=0\varphi(S_d^*,V^*)|_{S_d^*=0}/\varphi(S_d^*,V^*)|_{S_d^*=0;\theta=0}. (b) normalized mean curvature as a function of the contact angle, H∗(Sd∗,V∗)∣Sd∗=0/H∗(Sd∗,V∗)∣Sd∗=0;θ=0H^*(S_d^*,V^*)|_{S_d^*=0}/H^*(S_d^*,V^*)|_{S_d^*=0;\theta=0}.

It shows the half-filling angle and the mean curvature as functions of the contact angle, φ(Sd∗,V∗)∣Sd∗=0\varphi(S_d^*, V^*)|_{S_d^*=0} and H∗(Sd∗,V∗)∣Sd∗=0H^*(S_d^*, V^*)|_{S_d^*=0}, normalized by φ(Sd∗,V∗)∣Sd∗=0;θ=0\varphi(S_d^*, V^*)|_{S_d^*=0;\theta=0} and H∗(Sd∗,V∗)∣Sd∗=0;θ=0H^*(S_d^*, V^*)|_{S_d^*=0;\theta=0}, respectively, for four values of the volume.

For the largest volume shown here, V∗=0.1V^* = 0.1, the mean curvature assumes negative values for the contact angle θ≳40∘\theta\gtrsim40^\circ, indicating the pressure inside the liquid bridge exceeds the ambient pressure. The capillary pressure yields, thus, a repulsive contribution to the force between the spheres. The total force remains, however, attractive due to the dominating contribution of surface tension.[19]

Both the decrease in the half-filling angle and the mean curvature with increasing contact angle cause the curved surface of the liquid bridge to assume a nearly cylindrical shape for large θ\theta (see Figure 4), which in turn reduces the accessible surface of the liquid bridge.

Figure 6 shows the surface area of the liquid bridge spanning between contacting spheres as

Surface area of a liquid bridge between spheres in contact

Figure 6. Surface area of a liquid bridge between spheres in contact, as a function of the contact angle for various fixed volumes, V∗∈{10−6,10−5,10−4,10−3,10−2,10−1}V^* \in\{10^{-6},10^{-5},10^{-4},10^{-3},10^{-2},10^{-1}\}. Symbols: numerical results; lines: fit formula, Eq. (15).

a function of the contact angle, A∗(Sd∗,V∗)∣Sd∗=0A^*(S_d^*, V^*)|_{S_d^*=0}, as obtained from the numerical solution of Eq. (12), for several values of the volume, V∗∈[10−6,10−1]V^* \in[10^{-6}, 10^{-1}]. The data are normalized by A∗(Sd∗,V∗)∣Sd∗=0;θ=0A^*(S_d^*, V^*)|_{S_d^*=0;\theta=0}. The solid lines show the function

A∗(Sd∗,V∗)∣Sd∗=0A∗(Sd∗,V∗)∣Sd∗=0;θ=0=11+aθθ+bθθ2(15)\frac{A^*(S_d^*,V^*)|_{S_d^*=0}}{A^*(S_d^*,V^*)|_{S_d^*=0;\theta=0}} = \frac{1}{1+a_\theta\theta+b_\theta\theta^2} \tag*{(15)}

with the fit parameters

aθ=0.5615V−0.00836+0.7813V0.2046(16)a_\theta= 0.5615V^{-0.00836} + 0.7813V^{0.2046} \tag*{(16)}
bθ=−0.09168V−0.02997−0.4159V0.1933.b_\theta= -0.09168V^{-0.02997} - 0.4159V^{0.1933}.

Surface area as a function of the volume: General case, Sd∗≠0S_d^* \ne0, θ≠0\theta\ne0

The critical distance between the surfaces of the spheres when the liquid bridge ruptures is well described by[11]

Scrit∗=(1+θ2)(V∗1/3+V∗2/310),(17)S_{\mathrm{crit}}^* = \left(1+\frac{\theta}{2}\right)\left(V^{*1/3}+\frac{V^{*2/3}}{10}\right), \tag*{(17)}

with θ\theta in radians, thus, we consider Sd∗∈[0,Scrit∗]S_d^* \in[0,S_{\mathrm{crit}}^*]. For fixed volume, we scale the distance

S∗≡Sd∗Scrit∗,(18)S^* \equiv\frac{S_d^*}{S_{\mathrm{crit}}^*}, \tag*{(18)}

with S∗∈[0,1]S^* \in[0,1]. The numerical solution of the Young-Laplace equation for constant liquid bridge volume is presented in Figure 7-Figure 10.

Figure 7. Half-filling angle of a liquid bridge between spheres at distance S∗S^* for volume V∗∈{10−6,10−3,10−1}V^* \in\{10^{-6}, 10^{-3}, 10^{-1}\} and contact angle θ∈{0,25∘,50∘}\theta\in\{0,25^\circ,50^\circ\}. The data are normalized by φ(Sd∗,V∗)∣Sd∗=0;θ=0\varphi(S_d^*,V^*)|_{S_d^*=0;\theta=0}. Colors are numerical results for different volumes, and symbols show different contact angles.

Figure 10. Numerical results for capillary bridges of different volume, V∗∈{10−6,…10−1}V^{*} \in\{10^{-6}, \ldots10^{-1}\}, and different contact angle, θ∈{0…50∘}\theta\in\{0 \ldots50^{\circ}\} as a function of separation distance. Symbols show the numerical integration of Eq. (12), and lines show Eq. (21).

Figure 7 shows the half-filling angle as a function of the separation distance and the volume, φ(Sd∗,V∗)\varphi(S_d^*,V^*), normalized by the value for spheres in contact φ(Sd∗,V∗)∣Sd∗=0;θ=0\varphi(S_d^*,V^*)|_{S_d^*=0;\theta=0}. Data are shown for S∗∈[0,0.9]S^* \in[0,0.9]. The numerics become increasingly unstable beyond this interval, next to the rupture distance. For large contact angle values, θ=50∘\theta=50^\circ, φ(Sd∗,V∗)\varphi(S_d^*,V^*) is a decaying function, while for smaller contact angles, the function reveals a minimum.

Figure 8 shows the mean curvature as a function of the distance at constant volume,

Figure 8. Mean curvature of a liquid bridge as a function of the distance at constant volume, H∗(S∗)H^{*}(S^{*}), for V∗∈{10−6,10−4,10−2,10−1}V^{*} \in\{10^{-6},10^{-4},10^{-2},10^{-1}\} and contact angle θ∈{0,10∘,25∘,50∘}\theta\in\{0,10^\circ,25^\circ,50^\circ\}

H∗(Sd∗)H^*(S_d^*), for V∗∈{10−6,10−4,10−2,10−1}V^* \in\{10^{-6},10^{-4},10^{-2},10^{-1}\} and contact angle θ∈{0,10∘,25∘,50∘}\theta\in\{0,10^\circ,25^\circ,50^\circ\}. The function is strictly decaying, except for large volume, V∗=0.1V^*=0.1, where we see a maximum. This result contrasts previous studies [18, 19], where a monotonic decrease was reported independent of the volume.

Our main result is shown in Figure 9. It shows the accessible surface of a liquid bridge as a function of the distance, normalized by the surface area for spheres in contact, A∗(S∗)/A∗∣Sd∗=0;θ=0A^*(S^*)/A^*|_{S_d^*=0;\theta=0}, for constant volume V∗∈{10−6,10−5,10−4,10−3,10−2,10−1}V^* \in\{10^{-6},10^{-5},10^{-4},10^{-3},10^{-2},10^{-1}\} and contact angle θ∈{0,10∘,25∘,50∘}\theta\in\{0,10^\circ,25^\circ,50^\circ\}. The symbols show the numerical data, the lines show the fit formula, Eq. (19). Surprisingly, A∗(S∗)A^*(S^*) is not monotonous but has a minimum. Thus, the smallest surface area is not achieved when the spheres are in contact but at some distance.

Accessible surface of a liquid bridge spanning between spheres

Figure 9. Accessible surface of a liquid bridge spanning between spheres as a function of the distance S∗S^{*}. Symbols: numerical data for constant volume V∗∈{10−6,10−5,10−4,10−3,10−2,10−1}V^{*} \in\{10^{-6}, 10^{-5}, 10^{-4}, 10^{-3}, 10^{-2}, 10^{-1}\} and contact angle θ=0\theta= 0. Lines: fit formula, Eq. (19). Inset: same, but for V∗∈{10−6,10−4,10−1}V^{*} \in\{10^{-6}, 10^{-4}, 10^{-1}\} and θ∈{0,10∘,25∘,50∘}\theta\in\{0, 10^\circ, 25^\circ, 50^\circ\}

We approximate the numerical results by

A∗(Sd∗,V∗)∣θ=0A∗(Sd∗,V∗)∣Sd∗=0;θ=0=asS∗3−bsS∗2−csS∗−0.01asS∗4−dsS∗2−asS∗−0.01(19)\frac{A^*(S_d^*,V^*)|_{\theta=0}}{A^*(S_d^*,V^*)|_{S_d^*=0;\theta=0}} = \frac{a_s S^{*3}-b_s S^{*2}-c_s S^*-0.01}{a_s S^{*4}-d_s S^{*2}-a_s S^*-0.01} \tag*{(19)}

with

as=0.00539V∗−0.2332+0.00029V∗−0.0971bs=0.000057V∗−0.5419+0.01318V∗−0.2780cs=−0.003518V∗0.0237+0.00123V∗−0.2918ds=−0.003147V∗−0.0244+0.00475V∗−0.2453(20)\begin{aligned} a_s &= 0.00539V^{*-0.2332} + 0.00029V^{*-0.0971} \\ b_s &= 0.000057V^{*-0.5419} + 0.01318V^{*-0.2780} \\ c_s &= -0.003518V^{*0.0237} + 0.00123V^{*-0.2918} \\ d_s &= -0.003147V^{*-0.0244} + 0.00475V^{*-0.2453} \tag*{(20)} \end{aligned}

The effect of the contact angle on A∗A^{*} is illustrated in the inset to Figure 9, for V∗∈{10−6,10−4,10−1}V^{*} \in\{10^{-6},10^{-4},10^{-1}\}. For all values of θ\theta, the deviation from the curves for θ=0\theta= 0 is small and can be covered by a mild modification of Eq. (19):

A∗(Sd∗,V∗)A∗(Sd∗,V∗)∣Sd∗=0=asS∗3−eθfθ(1+θ)bsS∗2−csS∗−0.01asS∗4−fθ(1+θ)dsS∗2−eθgθasS∗−0.01(21)\frac{A^{*}(S_d^{*},V^{*})}{A^{*}(S_d^{*},V^{*})|_{S_d^{*}=0}} = \frac{a_sS^{*3}-e_{\theta}f_{\theta}(1+\theta)b_sS^{*2}-c_sS^{*}-0.01}{a_sS^{*4}-f_{\theta}(1+\theta)d_sS^{*2}-e_{\theta}g_{\theta}a_sS^{*}-0.01} \tag*{(21)}

with

eθ=aeθ2+aeθ−beθ−befθ=afθ2+bfθ+1gθ=agθ2+bgθ+1(22)\begin{aligned} e_{\theta} &= \frac{a_e\theta^2+a_e\theta-b_e}{\theta-b_e} \\ f_{\theta} &= a_f\theta^2+b_f\theta+1 \\ g_{\theta} &= a_g\theta^2+b_g\theta+1 \tag*{(22)} \end{aligned}

and the corresponding coefficients depending solely on the volume,

ae=0.0000298(ln⁡V∗)4+0.00111(ln⁡V∗)3+0.01421(ln⁡V∗)2+0.05821ln⁡V∗+0.2012be=0.0000877(ln⁡V∗)4+0.00305(ln⁡V∗)3+0.03849(ln⁡V∗)2+0.2521ln⁡V∗+0.243af=−0.9185V∗0.0612−11.46V∗0.8370bf=3.078V∗0.09386+12.77V∗0.68ag=−0.9588V∗0.0607−7.343V∗0.818bg=3.119V∗0.07801+7.643V∗0.5406.(23)\begin{aligned} a_e &= 0.0000298(\ln V^{*})^4 + 0.00111(\ln V^{*})^3 + 0.01421(\ln V^{*})^2 + \\ &\quad0.05821\ln V^{*} + 0.2012 \\ b_e &= 0.0000877(\ln V^{*})^4 + 0.00305(\ln V^{*})^3 + 0.03849(\ln V^{*})^2 + \\ &\quad0.2521\ln V^{*} + 0.243 \\ a_f &= -0.9185V^{*0.0612} - 11.46V^{*0.8370} \\ b_f &= 3.078V^{*0.09386} + 12.77V^{*0.68} \\ a_g &= -0.9588V^{*0.0607} - 7.343V^{*0.818} \\ b_g &= 3.119V^{*0.07801} + 7.643V^{*0.5406}. \tag*{(23)} \end{aligned}

Figure 10 compares the final fit formula, Eq. (21) with the numerical solution of Eq. (12),

based on the numerical solution of the Young-Laplace equation (8). We see that Eq. (21) approximates numerical data up to a good precision for the entire range of arguments. The contact angle, θ\theta, can be considered as a further variable, however, it plays more the rôle of a parameter since, in most cases, it stays invariant throughout the experiment.

Approximative expression F∗(Sd∗,V∗)F^{*}(S_{d}^{*}, V^{*}) for the interaction force

Outline

We develop approximative expressions for the interaction force due to a liquid bridge spanning between spheres as a function of the spheres’ distance and the volume of the liquid bridge, F∗(Sd∗,V∗)F^{*}(S_{d}^{*}, V^{*}), following a similar route as for the accessible surface area, A∗(Sd∗,V∗)A^{*}(S_{d}^{*}, V^{*}), considered in Sec. 3.1.

First, we derive an expression for the force under the conditions Sd∗=0S_{d}^{*}=0 and θ=0\theta=0, F∗(Sd∗,V∗)∣Sd∗=0;θ=0F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0;\theta=0}. Subsequently, we release the constraint θ=0\theta=0 to obtain F∗(Sd∗,V∗)∣Sd∗=0F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0}. Finally, we release the condition Sd∗=0S_{d}^{*}=0 to obtain F∗(Sd∗,V∗)F^{*}(S_{d}^{*}, V^{*}).

Capillary force as a function of the volume for particle separation Sd∗=0S_{d}^{*}=0 and contact angle θ=0\theta=0

For spheres in contact, Sd∗=0S_{d}^{*}=0, the capillary force is a decreasing function of the liquid bridge’s volume. Figure 11 shows F∗(Sd∗,V∗)∣Sd∗=0;θ=0F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0;\theta=0} obtained by numerical integration of Eq. (7). The numerical results are well approximated by

Figure 11. Capillary force between spheres in contact and for zero contact angle as a function of the dimensionless volume, F∗(Sd∗,V∗)∣Sd∗=0;θ=0F^{*}(S_d^{*},V^{*})|_{S_d^{*}=0;\theta=0}. The symbols show the numerical integration of Eq. (7), and the line shows the fit given by (24).

F∗(Sd∗,V∗)∣Sd∗=0;θ=0=2π(1−0.3823V∗0.2586).(24)F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0;\theta=0}=2\pi\left(1-0.3823V^{*0.2586}\right). \tag*{(24)}

Capillary force as a function of the volume for particle separation Sd∗=0S_{d}^{*}=0

Releasing the constraint θ=0\theta=0, we obtain F∗(Sd∗,V∗)∣Sd∗=0F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0} through integration of Eq. (7). The normalized forces can be approximated by

F∗(Sd∗,V∗)∣Sd∗=0F∗(Sd∗,V∗)∣Sd∗=0;θ=0=[1−aθsin⁡(θbθ)],(25)\frac{F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0}}{F^{*}(S_{d}^{*}, V^{*})|_{S_{d}^{*}=0;\theta=0}}=\left[1-a_{\theta}\sin\left(\theta^{b_{\theta}}\right)\right], \tag*{(25)}

where θ\theta is the contact angle in radian and aθa_{\theta} and bθb_{\theta} are functions of volume:

aθ=0.4158 V∗0.2835+0.6474bθ=−0.2087 V∗0.3113+2.267.(26)\begin{aligned} a_{\theta} &= 0.4158\,V^{*0.2835}+0.6474\\ b_{\theta} &= -0.2087\,V^{*0.3113}+2.267. \tag*{(26)} \end{aligned}

Figure 12 shows the interaction force, F∗(Sd∗,V∗)∣Sd∗=0F^{*}(S_d^{*},V^{*})|_{S_d^{*}=0}, as a function of the contact angle, θ\theta, as obtained by numerical integration of Eq. (7), in comparison with Eq. (25) for different values of the liquid volume, V∗∈{10−6,10−5,…,10−1}V^{*}\in\{10^{-6},10^{-5},\ldots,10^{-1}\}. The data are normalized by F∗(Sd∗,V∗)∣Sd∗=0;θ=0F^{*}(S_d^{*},V^{*})|_{S_d^{*}=0;\theta=0}.

Figure 12. Capillary force between spheres in contact as a function of the contact angle, F∗(Sd∗,V∗)∣Sd∗=0F^*(S_d^*,V^*)|_{S_d^*=0} for different values of the liquid volume, V∗∈{10−6,10−5,10−4,10−3,10−2,10−1}V^* \in\{10^{-6},10^{-5},10^{-4},10^{-3},10^{-2},10^{-1}\}. The symbols show the numerical integration of Eq. (7), and the lines show the fit given by (25).

This decreasing trend contradicts the simplifying analytical assumptions of the liquid bridge profile, e.g., Derjaguin’s equation[11], which predicts a constant dimensionless capillary force of 2π2\pi at zero separation[19].

Capillary force as a function of the volume: General case, Sd∗≠0S_d^* \ne0, θ≠0\theta\ne0

We generalize the previous result by releasing the constraint θ=0\theta= 0, that is, we consider spheres that are not in mechanical contact. As in § 3.1.4, we introduce the measure S∗S^* for the distance, defined by Eq. (17). Figure 13 shows the normalized capillary force, F∗(Sd∗,V∗)F^*(S_d^*,V^*), for different volumes, V∗∈{10−6,10−4,10−2,10−1}V^* \in\{10^{-6},10^{-4},10^{-2},10^{-1}\}, and contact angles, θ∈{0,10∘,20∘,30∘,40∘,50∘}\theta\in\{0,10^\circ,20^\circ,30^\circ,40^\circ,50^\circ\} as obtained from the numerical integration of Eq. (7).

Figure 13. Capillary force due to a liquid bridge spanning between two spheres as a function of the normalized distance S∗S^{*}, for a range of volumes, V∗∈{10−6,10−4,10−2,10−1}V^{*} \in\{10^{-6}, 10^{-4}, 10^{-2}, 10^{-1}\}, and contact angle, θ∈{0,10∘,20∘,30∘,40∘,50∘}\theta\in\{0, 10^{\circ}, 20^{\circ}, 30^{\circ}, 40^{\circ}, 50^{\circ}\}. Symbols: numerical integration of Eq. (7), Solid lines: the approximate expression Eq. (27).

The numerical results can be approximated by

F∗(Sd∗,V∗)F∗(Sd∗,V∗)∣Sd∗=0=1+asS∗1+cθasbsS∗+cθbsS∗2(27)\frac{F^*(S_d^*,V^*)}{F^*(S_d^*,V^*)|_{S_d^*=0}} = \frac{1+a_sS^*}{1+c_\theta a_s b_s S^*+c_\theta b_s S^{*2}} \tag*{(27)}

where asa_s and bsb_s are pure functions of dimensionless volume:

as=−0.3319V∗0.4974+0.6717V∗0.1995bs=13.84V∗−0.3909−12.11V∗−0.3945.(28)\begin{aligned} a_s &= -0.3319 V^{*0.4974} + 0.6717 V^{*0.1995} \\ b_s &= 13.84 V^{*-0.3909} - 12.11 V^{*-0.3945}. \tag*{(28)} \end{aligned}

The effect of the contact angle on the capillary force is taken into account by

cθ=acθ3+bcθ+1(29)c_{\theta} = a_c \theta^3 + b_c \theta+ 1 \tag*{(29)}

with

ac=−0.007815(ln⁡V∗)2−0.2105ln⁡V∗−1.426bc=−1.78V∗0.8351+0.6669V∗−0.0139.(30)\begin{aligned} a_c &= -0.007815(\ln V^{*})^2 - 0.2105\ln V^{*} - 1.426 \\ b_c &= -1.78 V^{*0.8351} + 0.6669 V^{*-0.0139}. \tag*{(30)} \end{aligned}

The approximate equation, Eq. (27), is shown in Figure 13 with solid lines to compare with the direct numerical solutions (symbols).

Conclusion

We present approximative expressions for the area of the accessible surface and the capillary force of a liquid bridge spanning between identical spheres as a function of the liquid volume and the distance of the particles. The equations are scaled by the particle radius, therefore, the radius does not appear in the final expressions. The surface area depends, moreover, on the liquid-solid contact angle and the surface tension coefficient. These quantities enter the expression as parameters.

These approximate expressions can be used in large-scale numerical simulations of drying suspensions where millions of capillary forces lead to macroscopic plastic deformations of materials, such as fragmentation. Here, the dynamics is determined by the local evaporation rate governed by the accessible surface of liquid bridges and by the capillary forces exerted on the particles by the liquid bridges. Instead of solving the Young-Laplace equation numerically in each time step, using the approximate expressions can accelerate the simulation considerably.

Numerical solution of the Young-Laplace equation

To solve the Young-Laplace equation (8) with the boundary conditions (9), we use a scheme similar to Lian and Seville [19]. Our method differs from their work in that we maintain a constant volume for the liquid bridge across the steps, whereas they keep the half-filling angle constant.

We write the second-order Young-Laplace equation as a system of two first-order equa tions and corresponding boundary conditions:

dy∗dx∗=z∗(x);dy∗dx∗∣−xc∗=sin⁡φ(31)\begin{aligned} \frac{\mathrm{d}y^*}{\mathrm{d}x^*} &= z^*(x) \qquad; \qquad\left.\frac{\mathrm{d}y^*}{\mathrm{d}x^*}\right|_{-x_c^*} = \sin\varphi \tag*{(31)} \end{aligned}
dz∗dx∗=2H∗[1+z∗(x)2]3/2+1+z∗(x)2y∗(x);dz∗dx∗∣−xc∗=−cot⁡(φ+θ).(32)\begin{aligned} \frac{\mathrm{d}z^*}{\mathrm{d}x^*} &= 2H^*\left[1+z^*(x)^2\right]^{3/2}+\frac{1+z^*(x)^2}{y^*(x)} \qquad; \qquad\left.\frac{\mathrm{d}z^*}{\mathrm{d}x^*}\right|_{-x_c^*} = -\cot(\varphi+\theta). \tag*{(32)} \end{aligned}

For the given half-filling angle, φ\varphi, contact angle, θ\theta, and separation distance, Sd∗S_d^*, the value of xc∗x_c^* and the boundary conditions are given by Eqs. (10) and (9), respectively.

The mean curvature, H∗H^*, is unknown and must be determined numerically. To this end, we exploit the toroidal approximation[18], which approximates the shape of the liquid bridge by a torus. The corresponding mean curvature reads

Htor∗=2sin⁡φ−Ra∗−Rm∗2Rmsin⁡φ.(33)H^*_{\mathrm{tor}}=\frac{2\sin\varphi-R_a^*-R_m^*}{2R_m\sin\varphi}. \tag*{(33)}

The meridional and the azimuthal radii,

Rm∗≡RmR≡Sd∗2+1−cos⁡φcos⁡(φ+θ)(34)R_m^*\equiv\frac{R_m}{R}\equiv\frac{\frac{S_d^*}{2}+1-\cos\varphi}{\cos(\varphi+\theta)} \tag*{(34)}
Ra∗≡RaR≡sin⁡φ−[1−sin⁡(φ+θ)][Sd∗2+1−cos⁡φ]cos⁡(φ+θ)(35)R_a^*\equiv\frac{R_a}{R}\equiv\sin\varphi-\frac{\left[1-\sin(\varphi+\theta)\right]\left[\frac{S_d^*}{2}+1-\cos\varphi\right]}{\cos(\varphi+\theta)} \tag*{(35)}

are shown in Fig. 1.

The numerical integration delivers the approximation yapp∗(x∗)y^*_{\mathrm{app}}(x^*) of the function y∗(x∗)y^*(x^*), and the solution would meet the second boundary condition at x∗=xroot∗x^*=x^*_{\mathrm{root}}. Therefore, the deviation

∣xroot∗−xc∗∣(36)\left|x^*_{\mathrm{root}}-x_c^*\right| \tag*{(36)}

can be used as an optimization criterion to determine the correct value of H∗H^*. We iterated the computation to obtain the mean curvature H∗H^* corresponding to xroot∗x^*_{\mathrm{root}} with an accuracy of ∣xroot∗−xc∗∣<10−12\lvert x_{\mathrm{root}}^{*} - x_{c}^{*} \rvert< 10^{-12}.

Numerical scheme for the derivation of approximate expressions

In § 3, we derived approximate equations under the condition of a constant volume of the liquid bridge. When solving the Young-Laplace equation, Eq. (8), the liquid bridge’s volume does not enter as a parameter. Therefore, to ensure a particular liquid volume, V∗V^{*}, at a specific separation distance, we employ an iterative approach that relies on the half-filling angle:

Initially, for the case of spheres in contact, Sd∗=0S_{d}^{*} = 0 and contact angle θ=0\theta= 0 are considered in Secs. 3.1.2 and § 3.2.2, we use an iterative root-finding method to calculate the half-filling angle φ\varphi for a liquid bridge with a specified volume V∗V^{*}. We start the iteration with

φguess=1.1206V∗0.2681.(37)\varphi_{\mathrm{guess}} = 1.1206V^{*0.2681}. \tag*{(37)}

due to the approximation given in Ref. 19. Solving the Young-Laplace equation results in a liquid bridge profile corresponding to the volume Vguess∗V_{\mathrm{guess}}^{*}. The half-filling angle, φguess\varphi_{\mathrm{guess}}, is then iteratively optimized until ∣Vguess∗−V∗∣<10−16\lvert V_{\mathrm{guess}}^{*} - V^{*} \rvert< 10^{-16}.

In § 3.1.3 and § 3.2.3 where we consider the case Sd∗=0S_{d}^{*} = 0; θ≠0\theta\ne0, for fixed contact angle, θ∈(0∘\theta\in(0^\circ to 50∘)50^\circ), we determine φ\varphi corresponding to a specific volume in the same way, where we use the solution for Sd∗=0S_{d}^{*} = 0; θ=0\theta= 0 as initial guess.

For the general case considered in § 3.1.4 and § 3.2.4 we determine φ\varphi in the same way, where the solutions for Sd∗=0S_{d}^{*} = 0; θ≠0\theta\ne0 serve as initial guess.

TOC Graphic

Two spherical objects connected by an area experiencing force and heat

Figure 1 (PDF p. 24).

References

  1. [1]Fustin, C.-A.; Glasser, G.; Spiess, H. W.; Jonas, U. Parameters influencing the templated growth of colloidal crystals on chemically patterned surfaces. Langmuir 2004, 20, 9114–9123.pubmed.ncbi.nlm.nih.gov/15461495
  2. [2]Nishimoto, A.; Mizuguchi, T.; Kitsunezaki, S. Numerical study of drying process and columnar fracture process in granule-water mixtures. Physical Review E 2007, 76, 016102.pubmed.ncbi.nlm.nih.gov/17677528
  3. [3]Goehring, L. Drying and cracking mechanisms in a starch slurry. Physical Review E 2009, 80, 036116.DOI
  4. [4]Goehring, L.; Nakahara, A.; Dutta, T.; Kitsunezaki, S.; Tarafdar, S. Desiccation Cracks and their Patterns: Formation and Modelling in Science and Nature; John Wiley & Sons, 2015.DOI
  5. [5]Cai, Z.; Li, Z.; Ravaine, S.; He, M.; Song, Y.; Yin, Y.; Zheng, H.; Teng, J.; Zhang, A. From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications. Chemical Society Reviews 2021, 50, 5898–5951.DOI
  6. [6]Zhou, Z.; Li, Q.; Zhao, X. S. Evolution of interparticle capillary forces during drying of colloidal crystals. Langmuir 2006, 22, 3692–3697.pubmed.ncbi.nlm.nih.gov/16584244
  7. [7]Goehring, L.; Clegg, W. J.; Routh, A. F. Solidification and ordering during directional drying of a colloidal Dispersion. Langmuir 2010, 26, 9269–9275.DOI
  8. [8]Ma, X.; Lowensohn, J.; Burton, J. C. Universal scaling of polygonal desiccation crack patterns. Physical Review E 2019, 99, 012802.DOI
  9. [9]Paul, A.; Samanta, D.; Dhar, P. Evaporation kinetics of wettability-moderated capillary bridges and squeezed droplets. Chemical Engineering Science 2023, 265, 118267.DOI
  10. [10]Erle, M. A.; Dyson, D. C.; Morrow, N. R. Liquid bridges between cylinders, in a torus, and between spheres. AIChE Journal 1971, 17, 115–121.DOI
  11. [11]Willett, C. D.; Adams, M. J.; Johnson, S. A.; Seville, J. P. Capillary bridges between two spherical bodies. Langmuir 2000, 16, 9396–9405.DOI
  12. [12]Fisher, R. A. On the capillary forces in an ideal soil; correction of formulae given by W. B. Haines. The Journal of Agricultural Science 1926, 16, 492–505.DOI
  13. [13]Derjaguin, B. Untersuchungen über die Reibung und Adhäsion, IV Theorie des Anhaftens kleiner Teilchen. Kolloid-Zeitschrift 1934, 69, 155–164.
  14. [14]Butt, H. J.; Kappl, M. Normal capillary forces. Advances in Colloid and Interface Science 2009, 146, 48–60.DOI
  15. [15]Rabinovich, Y. I.; Esayanur, M. S.; Moudgil, B. M. Capillary forces between two spheres with a fixed volume liquid bridge: Theory and experiment. Langmuir 2005, 21, 10992–10997.pubmed.ncbi.nlm.nih.gov/16285763
  16. [16]Gladkyy, A.; Schwarze, R. Comparison of different capillary bridge models for application in the discrete element method. Granular Matter 2014, 16, 911–920.DOI
  17. [17]Farmer, T. P.; Bird, J. C. Asymmetric capillary bridges between contacting spheres. Journal of Colloid and Interface Science 2015, 454, 192–199.DOI
  18. [18]Lian, G.; Thornton, C.; Adams, M. J. A theoretical study of the liquid bridge forces between two rigid spherical bodies. Journal of Colloid and Interface Science 1993, 161, 138–147.DOI
  19. [19]Lian, G.; Seville, J. The capillary bridge between two spheres: New closed-form equations in a two century old problem. Advances in Colloid and Interface Science 2016, 227, 53–62.DOI

Paper details

vlnc:W_jbw882ae
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents