betaFeedback

WorksPhysics and Astronomy

Broadband telecom single-photon emissions from InAs/InP quantum dots grown by MOVPE droplet epitaxy

Abstract

The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.

The deterministic emission characteristics of single photons, entangled photon pairs, and indistinguishable photons are important for efficient quantum light sources in applications such as quantum communication network and quantum computing[1, 2, 3]. Semiconductor epitaxial nanostructures have the most potential in the preparation of high purity single photon sources, and III-V compound semiconductor quantum dots (QDs) are considered to be almost perfect quantum emitters for the development and application of quantum networks[3, 4, 5, 6].

To enable high-speed, long-distance quantum information transmission, QD-based light sources must operate with high brightness at telecom wavelengths, specifically in the O-band (1310 nm) or C-band (1550 nm), where optical fibers exhibit minimal transmission losses (0.35 dB/km and 0.2 dB/km, respectively)[7]. Furthermore, the relatively low background solar irradiance and Rayleigh scattering in the telecom C-band render QD light sources particularly suitable for free-space and satellite-based quantum communication systems[8, 9].

In recent years, the characteristics of single-photon sources with emission wavelengths below 1 μm based on QDs have reached near-ideal level[10, 11, 12, 13, 14], demonstrating significant advances in brightness, single-photon purity, indistinguishability, and entanglement fidelity[7, 12, 15, 16, 17, 18, 19]. Notably, recent studies utilizing tunable open microcavities coupled deterministically with high-quantum efficiency single QD, combined with tailored laser pulse excitation, have achieved a multi-photon error rate as low as 0.0205(6), photon indistinguishability reaching 0.9856(13), and a system efficiency of up to 0.712(18). This performance marks the first instance of surpassing the efficiency threshold required for scalable photonic quantum computing. This corresponds to a multi-photon suppression ratio exceeding 98%, signifying high-fidelity single-photon generation[14].

However, the development of semiconductor single-photon sources in the telecom band still lags significantly behind and requires further advancements to achieve comparable performance levels. While InAs/GaAs QDs with high photon emission purity have been successfully grew using the traditional Stranski-Krastanov (SK) mode[7, 20, 21, 22], a complex strain epitaxy process has to be performed to redshift the wavelength owing to the large lattice mismatching of 7.2% between InAs and GaAs[23]. This involves a growth of a metamorphic InGaAs buffer layer to adjust the degree of strain via changing lattice constant and material composition, thereby facilitating the redshift of the emission wavelength[24]. The strain dependence is closely linked to the pronounced fine-structure splitting (FSS), arising from the asymmetry in QD shapes, as well as the relatively high dot density (typically exceeding 109 cm−210^{9}\ \mathrm{cm}^{-2})[25, 26], which together pose a major challenge for the prevailing S-K growth mode in realizing high-performance single-photon QD light sources.

In the InAs/InP system, due to the relatively lower lattice mismatch of 3.2%, the optical emission wavelength could be inherently tailored to the O-band to C-band ranges. However, it still facing the issue of high-density dot distribution using the S-K growth model. Droplet epitaxy (DE) recently has emerged as a highly promising alternative to the conventional SK growth mode. This process initially requires the regulation of substrate temperature and Group-III atomic flux deposition to form self-assembled droplets with specifically defined density and dimensions on the substrate surface. Subsequently, exposure to Group-V flux induces the direct crystallization of the droplets into III-V semiconductor QDs. The formation of QDs is not governed by the strain, thereby providing greater flexibility in the choice of epitaxial structures and materials[27, 28]. Another advantage is that near perfect symmetry has been achieved for the DE-grown QDs, which are ideal for generation of entangled photon pairs. In recent years, this technique has gained significant attention, particularly for the fabrication of low-density, high-symmetry QDs tailored for InAs/InP-based structures.

In this paper, we report high-quality low-density InAs/InP QDs for single-photon sources operating across a broad telecommunications band using quantum dot droplet epitaxy based on metal-organic vapor-phase epitaxy (MOVPE). The density and size of QDs are critical parameters The semiconductor QD samples were prepared using a DE technique in a MOVPE system equipped hydrogen (H2H_2) as the carrier gas. The precursors include trimethylindium (TMIn), arsine (AsH3_3), and phosphine (PH3_3) for the formation of In droplets, the crystallization of the droplets into QDs and the growth of InP cladding and cap layers, respectively. The epitaxial process starts with a 500 nm thick InP buffer layer growth at 600°C on a high-quality optical cavity-grown preferred surface InP (100) substrate, as illustrated in the growth sequence in Figure 1.

Schematic of the investigated QD structure and droplet and QD formation sequence

Figure 1. (a) Schematic of the investigated QD structure. (b) Schematic of the droplet and QD formation sequence before growing InP cap layer (the top and middle panels), where the stage I represents the formation of In droplets and the stage II represents the crystallization of QDs under the arsine flow. The bottom panel displays the QDs buried by a capping layer.

The DE process consists of two main stages: the formation of In metal droplets (stage I) under a constant TMIn flow in the first place followed by their subsequent crystallization (stage II) under the exposure to an AsH3_3 flow[27, 28]. In the droplet formation stage, the synergistic regulation of deposition temperature and growth interruption duration serves as a critical factor for controlling the density and uniformity of QDs. At lower temperatures, due to the limited migration length of adsorbed atoms, the formed In droplets have the characteristics of high density, small size and disordered spatial distribution. With the increase of temperature, the thermal activation energy will overcome the diffusion barrier, and the migration length of atoms will increase significantly, triggering the Ostwald ripening of the droplets. At this time, small droplets dissolve and transport to large droplets, so that the average diameter of the droplets expands and the density decreases.

However, when the substrate temperature was raised further, the excessive migration capability of atoms caused droplet coalescence and partial melting. Upon subsequent crystallization with As incorporation, these large droplets formed in this case further expanded, leading to the formation of two-dimensional microcrystalline structures in certain surface areas, thereby compromising the morphological uniformity of QDs[29]. After systematic optimization, we chose 340 °C as the deposition temperature for In and controlled the TMIn flow rate at 2.76 μmol/min for 35 s. Following droplet formation, we introduced a 25 s growth interruption before supplying arsenic (As) for crystallization. This interruption step promotes sufficient diffusion and effective attachment of In atoms to existing stable sites. This is beneficial to larger droplet formation with reduced density and narrowed droplet size distribution.

The morphology of the indium droplets under the aforementioned epitaxial parameters was systematically characterized using Atomic Force Microscopy (AFM), as shown in Figure 2. The droplets exhibit a uniform distribution in both size and height under these growth conditions. To further analyze the In droplets, we obtained an indium droplet density of approximately 3×1083 \times10^{8} cm−2^{-2} using multi-region statistical sampling (covering 5, 10 μm2^{2} regions). Figure 2(b)-(Figure 2c) show a histogram of the statistical distribution of size and height of 146 droplets. The results reveal that the droplets exhibit a highly concentrated size and height distribution without noticeable multi-peak or discrete features. The average diameter of the droplets is (45±5) nm and the average height is (8±2) nm. This distribution of size and height indicates that the chosen growth parameters, especially the growth interruption time, are reasonable and appropriate.

AFM images of indium droplets and distributions of their diameters and heights

Figure 2. (a) AFM images of the indium droplets on a bare InP substrate. Inset: zoomed-in AFM image of an indium droplet. (b) and (c) Distributions of diameters and heights of the indium droplets, respectively.

After formation of In droplets and a 25 s growth interruption, an AsH3_3 flux of 26 μmol/min26\ \mu\mathrm{mol}/\mathrm{min} is applied for the crystallization of the droplets into InAs QDs which is the second key stage of DE (Figure 1). The substrate temperature is then raised to 510 °C and maintained for 5 min to facilitate the QD crystallization. Figure 3(a)–(Figure 3c) shows AFM images of as-prepared free-standing InAs/InP QDs on the InP surface at different scan scales. Three main features can be clearly observed: 1) Low density distribution: Following a statistical approach analogous to that employed for In droplet density quantification, the areal density of QDs was systematically characterized across multiple regions of the wafer. The average QD density was determined to be approximately 5×107 cm−25 \times10^{7}\ \mathrm{cm}^{-2}. Notably, as shown in Figure 3(a), certain localized areas—with-in a scanning region of 60×60 μm260 \times60\ \mu\mathrm{m}^{2}—exhibit a significantly reduced QD density as low as 4×105 cm−24 \times10^{5}\ \mathrm{cm}^{-2}. 2) Uniform size: The size of QD is roughly consistent across the scanned area, as verified using the built-in size measurement system of the AFM. This uniformity is particularly pronounced in the 3×3 μm23 \times3\ \mu\mathrm{m}^{2} scan range shown in Figure 3(b). 3) High symmetry of QD: The aspect ratio of the QDs was statistically analyzed through elliptical measurements using AFM. The average in-plane aspect ratio was found to be 1.06, with a standard deviation of 0.0487. These results demonstrate that the QDs exhibit high symmetry, as evidenced by the data obtained under the proposed growth methodology (Figure 3). This high symmetry is essential for achieving an ideal single-photon source. Through the analysis of a large number of crystallized QDs, the typical diameter and height of the QDs at 510 °C were (48±6)(48 \pm6) nm, and (12±4)(12 \pm4) nm, respectively. It is noteworthy that our profilometry results indicate no significant localized etching near the QDs, which is attributed to the chosen crystallization temperature of 510 °C. If a higher temperature had been selected, the InP surface would have become largely unstable due to the lack of phosphine supply and the formation of an In-rich surface configuration following the deposition of In droplets, leading to be dissolved[29, 30]. Employing buried QD epitaxial structure has been shown as an important factor affecting the shape and size of QDs, thereby their emission characteristics[31, 32, 33, 34, 35, 36]. In this work, a thin InP capping layer was deposited on the samples prepared under the above-mentioned epitaxial conditions (at the crystallization temperature of 510 °C) to encapsulate the QDs. To achieve the target emission wavelength, capping layer thicknesses of 5, 10, 15, and 20 nm were tested. Subsequently, the growth temperature was ramped up to 600°C, and an 80 nm thick InP layer was deposited as the topmost layer (Figure 1, the far-right panel). The growth of this layer at a higher temperature is beneficial to complete the structure of the QDs and provide good optical properties for the surrounding layer.

AFM images and distributions of InAs/InP quantum dots

Figure 3. AFM images of the QDs on a bare InP substrate: sample scanning range (a) 60×60 μm260 \times60\ \mu\mathrm{m}^{2}, (b) 3×3 μm23 \times3\ \mu\mathrm{m}^{2} and (c) 1×1 μm21 \times1\ \mu\mathrm{m}^{2}. (d) and (e) Distributions of diameters and heights of QDs on bare InP, respectively. (f) Profile extractions of the QD shown in (c) along [110][110] and [11ˉ0][1\bar{1}0] directions.

A custom-built confocal microscopic spectroscopy system was employed in this study to characterize the optical properties of quantum dot samples, as depicted in Figure 4(a). The system consists of three main components: an optional pump laser source, a flow-type liquid helium cryostat equipped with an objective lens, and a multi-channel data acquisition system. The pump light is directed through a mirror and a beam splitter, then focused onto the sample surface in the cryogenic environment via the objective lens for excitation of the quantum dot emission. The excited fluorescence signal is collected by the same objective lens and coupled into different detection channels through the confocal optical path. These channels allow for spectral analysis, fluorescence lifetime measurement, and second-order autocorrelation function (g(2)(τ)g^{(2)}(\tau)) test, providing comprehensive data about the emission wavelength, radiative dynamics, and single-photon emission characteristics of the QDs.

Custom-built optical performance characterization system and photoluminescence spectra

Figure 4. (a) Schematic diagram of the custom-built optical performance characterization system for precise measurement and analysis of sample optical properties. (b) PL spectra of the QD sample with a 15 nm capping layer at room temperature (Inset: The vertical axis is compressed to highlight PeakC_\mathrm{C}). (c) μ-PL spectra of QD ensembles with varying capping layer thicknesses ranging from 5 to 20 nm under CW excitation (633 nm) at 4 K.

All samples (the cap thickness of samples ranges from 5 nm to 20 nm) exhibit similar macroscopic PL line characteristics at room temperature (RT) under the high-power density excitation of a 633 nm diode laser, as shown in Figure 4(b) using a 15 nm thin overburden sample as a representative case. The peakA_A (921.8 nm) is attributed to the InP substrate[29, 37], while the peak at 1064.3 nm (peakB_B) is ascribed to the non-stoichiometric 2D layer formed on the surface during the temperature ramp and arsenic flux exposure, resulting from the arsenic-phosphorus exchange reaction. It is referred to as a “2D quasi-wetting layer” (WL) and is likely made of InAsx_xP1−x_{1-x}[29, 38].

In addition, a weak envelope is observed in the range above 1500 nm. Due to the relatively small lattice mismatch (~3%), the InAs/InP system naturally favors the formation of larger QDs. Therefore, we speculate that, as observed in previous studies, the peak at over 1500 nm (peakC_C) originates from the contribution of low-density distributed QDs.

To further investigate whether the PeakC_C observed at RT arises from QD contributions with telecommunication band emission characteristics, the sample was placed in a flow-type liquid helium cryostat, maintained at a temperature of 4 K, for micro-photoluminescence (μ\mu-PL) spectroscopy measurements. A continuous-wave (CW) laser (633 nm) was used to excite samples, with the excitation light focused to a spot size of 1.2 μ\mum using an objective lens (NA = 0.65). Figure 4(c) shows the spectra of the samples in the spectral of 1200-1600 nm range. For the samples with capping layer thickness of 5 nm and 10 nm, the emission lines are almost all distributed in the short-wavelength O and E communication bands. The number of individual emission lines that can be detected in the S-band and its red edge is small and the intensity is low, as shown in Figure 4(c). As the thickness of the capping layer increases further upwards (15 nm), long wavelength emissions in the S, C, and even L bands are observed. When the thickness is increased to 20 nm, no valid single spectral line is detected even with further excitation intensity. This is attributed to the fact that as the thickness is further increased, the produced QDs are larger in size resulting a significant red shift, which is beyond the effective detection range of the spectrometer (cut-off to 1600 nm). Clearly, the cap layer thickness plays an important role in tuning the emitting wavelength of the QDs, a broadband emitting spectrum spanning the entire O, E, S, C and L bands with narrow lines spanning 1250-1600 nm is recorded for a cap layer thickness of 15 nm.

To verify the single-photon emission characteristics of the QDs, second-order intensity autocorrelation measurements were performed on the single emission lines in each spectral band under continuous excitation with a 633 nm laser source. The second-order autocorrelation function values at zero delay under continuous-wave excitation conditions, for the O-band, S-band, E-band, C-band and L-band single-photon sources, are recorded in Figure 5, respectively. The corresponding g(2)(0)g^{(2)}(0) through fitting are 0.28, 0.33, 0.16, 0.18, and 0.24, respectively, indicating pronounced single photon emissions spanning the entire O-L telecom wavelengths from the planar, cavity-free InAs QD structures. The single-photon performance would be further enhanced by certain nanocavities like the nanowires or elliptical Bragg grating (EBG), via the Purcell enhancement effect that intrinsically incorporating low-mode-volume optical confinement elements[10, 18, 39]. The PL lifetime measurements of QDs from corresponding spectral bands were also conducted under the 780 nm pulsed excitation. PL lifetimes of the QDs in each spectral band ranging from 1.5 to 2 ns are obtained by fitting the measured experimental data using an exponential decay model. The weak electron confinement in the InP/InAs material system and low local density of states of the photonic field lead to slow recombination rates compared to other material systems (such as GaAs/InAs) with cavity enhancements.[18, 40, 41, 42, 43] It is anticipated that, with the integration of subsequent microcavity designs (such as elliptical Bragg gratings and topological bulk cavity), the lifetime can be compressed to the order of hundreds of picoseconds.[39, 43]

Optical characterizations of representative QDs across the O-, E-, S-, C-, and L-bands

Figure 5. Optical characterizations of the representative QDs from a 15-nm thick capping layer sample in different spectral ranges: (a) O-band, (b) E-band, (c) S-band, (d) C-band and (e) L-band, respectively. Panel Ⅰ denotes the μ\mu-PL spectra of each QD. The corresponding second-order correlation function measurements are shown in panel Ⅱ (where circles represent the measured values and the solid line is the fit to the data). Panel III presents the fluorescence lifetime measurements of the QDs under 780 nm pulsed excitation.

In conclusion, we have prepared InAs/InP QDs for broadband telecom band single photon emissions by DE based on MOVPE. The characterization of the surface morphology by AFM shows that the density distribution of quantum dots as low as ∼4×105 cm−2\sim4 \times10^{5}\ \mathrm{cm}^{-2} can be achieved by optimizing the epitaxial temperature and other parameters. Covered by a 15-nm thin InP cap layer, the grown QD samples emits effective single-line emissions in a wide range of spectra of the entire O-L bands. The g(2)(0)g^{(2)}(0) of these QDs is as low as 0.16, indicating their excellent single-photon emission characteristics. The prepared InAs QDs embedded in InP claddings exhibit stable optical performance under continuous-wave excitation through multiple experimental runs, confirming the excellent fatigue resistance and process reproducibility. The MOVPE epitaxial technology offers inherent scalability for its mass production. The emission in the telecom band enables direct compatibility with existing fiber optic infrastructure and hybrid quantum-classical network architectures. These characteristics demonstrate that the demonstrated quantum dot light material system meets both stability and system integration requirements for quantum network applications, providing a reliable material platform for advancing quantum information technologies. By further integrating microcavity enhancement techniques or coupling the QDs to other optical devices, there is a promising and reliable pathway to rapid advancement of the quantum information technologies and their applications, particularly in the fields of quantum networking and secure communication.

References

  1. [1]Yuan Z, Kardynal B E, Stevenson R M, Shields A J, Lobo C J, Cooper K, Beattie N S, Ritchie D A and Pepper M 2002 Science 295 102
  2. [2]Zhou L, Lin J, Xie Y M, Lu Y S, Jing Y, Yin H L and Yuan Z 2023 Phys. Rev. Lett. 130 250801
  3. [3]Becher C, Gao W, Kar S, Marciniak C D, Monz T, Bartholomew J G, Goldner P, Loh H, Marcellina E, Goh K E J, Koh T S, Weber B, Mu Z, Tsai J Y, Yan Q, Huber Loyola T, Höfling S, Gyger S, Steinhauer S and Zwiller V 2023 Mater. Quantum Technol. 3 012501
  4. [4]Benson O, Santori C, Pelton M and Yamamoto Y 2000 Phys. Rev. Lett. 84 2513
  5. [5]Schimpf C, Reindl M, Basso Basset F, Jöns K D, Trotta R and Rastelli A 2021 Appl. Phys. Lett. 118 100502
  6. [6]Zaporski L, Shofer N, Bodey J H, Manna S, Gillard G, Appel M H, Schimpf C, Covre da Silva S F, Jarman J, Delamare G, Park G, Haeusler U, Chekhovich E A, Rastelli A, Gangloff D A, Atatüre M and Le Gall C 2023 Nat. Nanotechnol. 18 257
  7. [7]Yu Y, Liu S, Lee C-M, Michler P, Reitzenstein S, Srinivasan K, Waks E and Liu J 2023 Nat. Nanotechnol. 18 1389
  8. [8]Liao S K, Yong H L, Liu C, Shentu G-L, Li D D, Lin J, Dai H, Zhao S Q, Li B, Guan J Y, Chen W, Gong Y H, Li Y, Lin Z H, Pan G S, Pelc J S, Fejer M M, Zhang W Z, Liu W Y, Yin J, Ren J G, Wang X B, Zhang Q, Peng C-Z and Pan J-W 2017 Nat. Photonics 11 509
  9. [9]Avesani M, Calderaro L, Schiavon M, Stanco A, Agnesi C, Santamato A, Zahidy M, Scriminich A, Foletto G, Contestabile G, Chiesa M, Rotta D, Artiglia M, Montanaro A, Romagnoli M, Sorianello V, Vedovato F, Vallone G and Villoresi P 2021 npj Quantum Inform. 7 93
  10. [10]Wu B, Wang X-J, Liu L, Huang G, Wang W, Liu H, Ni H, Niu Z and Yuan Z 2023 Optica 10 1118
  11. [11]Wang X J, Huang G, Li M Y, Wang Y Z, Liu L, Wu B, Liu H, Ni H, Niu Z, Ji W, Jiao R, Yin H-L and Yuan Z 2025 Nat. Commun. 16 6453
  12. [12]Tomm N, Javadi A, Antoniadis N O, Najer D, Löbl M C, Korsch A R, Schott R, Valentin S R, Wieck A D, Ludwig A and Warburton R J 2021 Nat. Nanotechnol. 16 399
  13. [13]Musiał A, Mikulicz M, Mrowiński P, Zielińska A, Sitarek P, Wyborski P, Kuniej M, Reithmaier J P, Sęk G and Benyoucef M 2021 Appl. Phys. Lett. 118 221101
  14. [14]Ding X, Guo Y P, Xu M C, Liu R Z, Zou G Y, Zhao J Y, Ge Z X, Zhang Q H, Liu H L, Wang L J, Chen M C, Wang H, He Y M, Huo Y H, Lu C Y and Pan J-W 2025 Nat. Photonics 19 387
  15. [15]Ren P, Wei S, Liu W, Lin S, Tian Z, Huang T, Tang J, Shi Y and Chen X-W 2022 Nat. Commun. 13 3982
  16. [16]Li R, Liu F and Lu Q 2023 Photonics 10 639
  17. [17]Li R, Zhang J and Lu Q 2024 Opt. Express 32 45918
  18. [18]Ge Z, Chung T, He Y-M, Benyoucef M and Huo Y 2024 Nano Lett. 24 1746
  19. [19]Zhang Y, Ding X, Li Y, Zhang L, Guo Y P, Wang G Q, Ning Z, Xu M C, Liu R Z, Zhao J Y, Zou G Y, Wang H, Cao Y, He Y M, Peng C Z, Huo Y H, Liao S-K, Lu C-Y, Xu F and Pan J W 2025 Phys. Rev. Lett. 134 210801
  20. [20]Nawrath C, Vural H, Fischer J, Schaber R, Portalupi S L, Jetter M and Michler P 2021 Appl. Phys. Lett. 118 244002
  21. [21]Nawrath C, Joos R, Kolatschek S, Bauer S, Pruy P, Hornung F, Fischer J, Huang J, Vijayan P, Sittig R, Jetter M, Portalupi S L and Michler P 2023 Adv. Quantum Technol. 6 2300111
  22. [22]Holewa P, Vajner D A, Zięba-Ostój E, Wasiluk M, Gaál B, Sakanas A, Mikulicz M G, Mrowiński P, Krajnik B, Xiong M, Yvind K, Gregersen N, Musiał A, Huck A, Heindel T, Spereck M and Semenova E 2024 Nat. Commun. 15 3358
  23. [23]Chang S Z, Chang T C and Lee S C 1993 J. Appl. Phys.73 4916
  24. [24]Sittig R, Nawrath C, Kolatschek S, Bauer S, Schaber R, Huang J, Vijayan P, Pruy P, Portalupi S L, Jetter M and Michler P 2022 Nanophotonics 11 1109
  25. [25]Osipov A V, Schmitt F, Kukushkin S A and Hess P 2002 Appl. Surf. Sci. 188 156
  26. [26]Dubrovskij V 2014 Nucleation Theory and Growth of Nanostructures
  27. [27]Koguchi N, Takahashi S and Chikyow T 1991 J. Cryst. Growth 111 688
  28. [28]Gurioli M, Wang Z, Rastelli A, Kuroda T and Sanguinetti S 2019 Nat. Mater. 18 799
  29. [29]Sala E M, Na Y I, Godsland M, Trapalis A and Heffernan J 2020 Phys. Status Solidi-Rapid Res. Lett. 14 2000173
  30. [30]Wang Z M, Liang B L, Sablon K A and Salamo G J 2007 Appl. Phys. Lett. 90 113120
  31. [31]García J M, Medeiros-Ribeiro G, Schmidt K, Ngo T, Feng J L, Lorke A, Kotthaus J and Petroff P M 1997 Appl. Phys. Lett. 71 2014
  32. [32]Lian G D, Yuan J, Brown L M, Kim G H and Ritchie D A 1998 Appl. Phys. Lett. 73 49
  33. [33]Paranthoen C, Bertru N, Dehaese O, Le Corre A, Loualiche S, Lambert B and Patriarche G 2001 Appl. Phys. Lett. 78 1751
  34. [34]Ferdos F, Wang S, Wei Y, Larsson A, Sadeghi M and Zhao Q 2002 Appl. Phys. Lett. 81 1195
  35. [35]Ulloa J M, Çelebi C, Koenraad P M, Simon A, Gapihan E, Letoublon A, Bertru N, Drouzas I, Mowbray D J, Steer M J and Hopkinson M 2007 J. Appl. Phys. 101 081707
  36. [36]Sala E M, Godsland M, Trapalis A and Heffernan J 2021 Phys. Status Solidi-Rapid Res. Lett. 15 2100283
  37. [37]Bugajski M and Lewandowski W 1985 J. Appl. Phys. 57 521
  38. [38]Miyazawa T, Okumura S, Hirose S, Takemoto K, Takatsu M, Usuki T, Yokoyama N and Arakawa Y 2008 Jpn. J. Appl. Phys. 47 2880
  39. [39]Wakileh A N, Yu L, Dokuz D, Hafouz S, Wu X, Lapointe J, Northeast D B, Williams R L, Rotenberg N, Poole P J and Dalacu D 2024 Appl. Phys. Lett. 124 044006.
  40. [40]Gong M, Zhang W, Can Guo G and He L 2011 Appl. Phys. Lett. 99 231106
  41. [41]Dorenbos S N, Sasakura H, van Kouwen M P, Akopian N, Adachi S, Namekata N, Jo M, Motohisa J, Kobayashi Y, Tomioka K, Fukui T, Inoue S, Kumano H, Natarajan C M, Hadfield R H, Zijlstra T, Klapwijk T M, Zwiller V and Suemune I 2010 Appl. Phys. Lett. 97 171106
  42. [42]Gazzano O, de Vasconcellos S M, Gauthron K, Symonds C, Bloch J, Voisin P, Bellessa J, Lemaître A and Senellart P 2011 Phys. Rev. Lett. 107 247402
  43. [43]Mao X R, Ji W J, Wang S L, Liu H Q, Wu B, Wang X J, Liu L, Zhou L, Ni H, Niu Z and Yuan Z 2025 Light: Science & Applications 14 295

Paper details

vlnc:W_khawg3yy
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents