In this paper
AbstractIntroductionPreliminariesCurvature blow-up and splittingEntropy bounds and asymptotic volume growth on Ricci-flat manifoldsThe proof of Theorem 1.1ReferencesWorksMathematics
Curvature estimates for shrinking gradient Ricci solitons
Abstract
Suppose is a complete gradient shrinking Ricci soliton with bounded scalar curvature. We prove that if , then its Riemannian curvature is bounded. The proof uses curvature blow-up, a local Ricci estimate, and the splitting given by the rescaled potential. An entropy estimate then allows us to apply the volume-ratio gap theorem for Ricci-flat four-manifolds.
Introduction
A gradient Ricci soliton is a complete Riemannian manifold with a smooth function satisfying
for a constant . The soliton is shrinking, steady, or expanding according as , , or . In the shrinking case we rescale the metric so that
Gradient Ricci solitons generate self-similar solutions to the Ricci flow by diffeomorphisms and scaling. They play a basic role in the analysis of singularities of the flow. In his study of ancient -solutions, Perelman [17, 18] established the structure underlying the three-dimensional singularity analysis. Together with the work of Ni–Wallach [16] and Cao–Chen–Zhu [4], this led to the classification of three-dimensional shrinking gradient Ricci solitons. In higher dimensions, classification results usually require additional curvature assumptions; see, for example, [2, 3, 5, 15, 19, 20, 24, 25].
Curvature boundedness is an important preliminary issue in these classification problems. In dimension four, Munteanu–Wang [14] proved that a scalar curvature upper bound implies an estimate , and hence bounded curvature. In dimensions five and higher, the scalar curvature does not give a direct bound for the curvature tensor. It is natural to seek conditions under which bounded scalar curvature still rules out curvature concentration at infinity.
In this paper, we prove the following entropy-gap criterion in dimension five. We use Perelman’s scale-invariant entropy , whose definition is recalled in § 2.
Theorem 1.1. Let be a fixed complete gradient shrinking Ricci soliton satisfying (1.1). If
then its Riemannian curvature is bounded:
We prove the theorem by contradiction. A point-selection argument, the noncollapsing theorem of Li–Wang [12], and their backward pseudolocality theorem [13] produce a complete smooth curvature blow-up limit. Bounded scalar curvature makes this limit Ricci flat. To prove that the limit splits, we use the local Ricci estimate of Chen–Wang [9 Theorem 1.2], in the higher-derivative form recorded by Bamler [1 Proposition 3.6], to obtain the bound
on each fixed pointed ball. Using this estimate, we show that the normalized potential converges to a function with parallel unit gradient. Thus the nonflat limit has a global splitting
Wang’s continuity result for the local -functional under pointed smooth Cheeger–Gromov convergence, together with domain monotonicity and exhaustion, provides one way to compare the entropies; see [23]. We give the needed one-sided inequality directly by transferring compactly supported test functions and using the scale invariance of . This yields . A Gaussian test-function argument then gives
where denotes the Euclidean-normalized asymptotic volume ratio. The product splitting preserves this ratio. The entropy assumption therefore implies
The sharp four-dimensional Ricci-flat gap theorem of Honda–Mondino [11 Proposition 3.7] forces to be Euclidean, contradicting the nonflatness of the normalized blow-up. The zeroth-order local Ricci estimate is sufficient for the Hessian estimate that produces the splitting.
The paper is organized as follows. Section 2 recalls the soliton identities, entropy, and local estimates used below. Section 3 constructs the Ricci-flat blow-up and proves its global real-line splitting under bounded scalar curvature. Section 4 establishes the entropy–volume estimate and invariance of the asymptotic volume ratio under Euclidean products. In Section 5, we prove Theorem 1.1.
Acknowledgement: The present work is a continuation of the research undertaken by the third author as a master’s student. The third author would like to thank Professor Meng Zhu and Wenqi Li for their constant encouragement and helpful discussions.
Disclosure on AI assistance. The research problem and the principal mathematical ideas were formulated by the authors. The authors used ChatGPT to assist with checking some computations and polishing the exposition. All mathematical claims, citations, and final arguments remain the responsibility of the authors.
Preliminaries
Throughout the paper, manifolds are smooth, connected, and without boundary. A shrinking gradient Ricci soliton is normalized by
After adding a constant to , we also assume
We write . We use the metric to take gradients, Hessians, traces, and norms unless another metric is written. The standard soliton identities are
For completeness, these identities follow directly from (3). Taking its trace gives (6). The contracted Bianchi identity and the divergence formula for the Hessian give
Since , this is (5). It follows that
Thus adding a constant to indeed gives (4). Subtracting this identity from (6) proves (7). Finally, taking the divergence of gives
which proves (8). In particular, We also know the fact that every complete gradient shrinking Ricci soliton has nonnegative scalar curvature [8].
We first recall the entropy conventions. For a complete manifold put
For and , define
where is interpreted as zero at . Perelman’s functionals [17] are
Constant metric rescaling satisfies
To check the scaling formula, let , put , and set . Then
Consequently if and only if . The energy term in is unchanged. The logarithmic term satisfies
The last summand cancels the change in . Hence . Taking the two infima proves (11). For a probability potential , with , the equivalent expression is
Indeed, on the set where ,
Substitution in (9) gives (12). We will use this expression for a noncompactly supported density only after showing that its value is the limit of values for compactly supported smooth test functions. This approximation is supplied in the proof of Lemma 4.1.
The constant added to obtain a probability potential should be kept separate from the normalization (4). If
then Proposition 2.1 says that . Thus satisfies
Adding this constant changes neither nor . We continue to use with normalization (4) when we differentiate the potential.
Lemma 2.2. Let be a complete noncompact shrinker satisfying (3)–(4). For a fixed reference point , there is a constant such that
In particular, is proper and tends to infinity along every divergent sequence. Outside a compact set, the function is smooth and satisfies
Moreover, wherever .
Proof. The growth estimate is the standard potential estimate of Cao–Zhou [6]; enlarging absorbs the choice of the reference point. The positive part is denoted by . Differentiating gives . Equation (4) gives the gradient identity in (15). For the Hessian,
where we used (3). The gradient bound follows from . The lower growth bound implies that outside a compact set, so all the differentiations above are valid there. It also implies that sublevel sets of are bounded. They are closed, and hence compact by completeness. This proves the properness assertion. □
We next state the local results used in the curvature blow-up. For a Ricci flow , write
Here the spatial ball is formed with the metric at the terminal time . It is the same set of points at each time in the product. Curvature norms and scalar curvature at time are computed using . All such neighborhoods are understood to lie in the time domain of the flow.
Theorem 2.3 (Scalar-curvature noncollapsing, [12]). For a fixed complete shrinker , there is a constant such that
The statement is invariant under constant metric rescaling.
Only a scalar curvature bound is used in this noncollapsing statement. No bound for the full curvature tensor is required. For example, if on all of , then every ball with satisfies its hypothesis. To check its scaling invariance, put . A ball of radius for is the ball of radius for , and
The scalar curvature assumption transforms into , and the same therefore works for . The assertion is also unchanged by a pullback under a diffeomorphism.
Theorem 2.4 (Backward pseudolocality, [13 Theorem 6.21]). For every , there is an with the following property. Let be a Ricci flow induced by a complete shrinking gradient Ricci soliton. If
then
In the preceding theorem, both hypotheses concern only the terminal ball. The conclusion gives control on a smaller ball for a definite interval before . The constants depend only on and , so they do not change when we apply the theorem at different points of the same rescaled flow. In Section 3 we will apply it at every point of a fixed terminal ball. This gives the curvature bound on a whole spatial region, which is needed for the next estimate.
Proposition 2.5 (Local Ricci estimate, [1 Proposition 3.6]). Let , , be a Ricci flow on an -dimensional manifold, let , and let . Suppose is relatively compact and
where . Then, for every integer ,
The zeroth-order estimate was proved earlier by Chen and Wang in On the conditions to extend Ricci flow (III) [9 Theorem 1.2]. Their theorem concerns a complete flow with
and gives
After parabolic rescaling, this has the form . Thus Chen–Wang’s theorem gives the case needed for the splitting argument below. The higher-derivative estimates in (16) are quoted from [1 Proposition 3.6].
The estimate (16) is local and does not require the ambient manifold to be compact. In its application below, the radius is fixed in the rescaled flow, while tends to zero. The square-root rate is what controls the rescaled Hessian of the potential. More precisely, gives . The constant is independent of , so this is a quantitative rate as the scalar curvature tends to zero. Smooth convergence alone would give only , without a specified rate.
Curvature blow-up and splitting
In this section we establish the blow-up and splitting statements used in the proof of the main theorem. These statements hold in arbitrary dimension. The scalar curvature bound will be used both to obtain a Ricci-flat limit and, through a local Ricci estimate, to produce a parallel direction in that limit.
Lemma 3.1 (Point selection). Let be a complete noncompact Riemannian manifold with . There are points and numbers such that
Proof. Fix . Curvature is bounded on each compact subset, so we can choose with and . Indeed, the closed ball is compact by completeness and has bounded curvature. Unboundedness of curvature therefore allows us to choose outside this ball with curvature as large as required.
Start with as the current point. If the current point is and , stop if on . Otherwise choose a point in this ball where the curvature is greater than , and repeat.
After moves the curvature is at least . Consequently, counting the first move as , the distance moved at the th step is at most . Thus the total distance from is at most
The same geometric series bounds the distance between any two late points by a tail tending to zero. An infinite sequence of moves would therefore be Cauchy. By completeness it would converge to a point of , while its curvature tends to infinity. This contradicts continuity of curvature at the limit point. The process therefore terminates at a point satisfying (3.1). Moreover, , so .
Lemma 3.2 (Parabolic control and a local Ricci estimate). Let be a fixed complete noncompact shrinker satisfying (3) and (4), with . Let
satisfy (17). Write
There are and , independent of , such that, for each fixed and all sufficiently large ,
For every nonnegative integer there is also a constant , independent of and , such that, for all sufficiently large depending on ,
The constants may depend on the fixed shrinker, , , and, in the last estimate, on .
Proof. We first note that the flow in (18) is well defined for and satisfies . The potential growth estimate and show that has at most linear growth. Its time-dependent multiple thus has a complete flow on every compact subinterval of . Differentiating the first formula in (18) and using gives
Parabolic rescaling therefore makes a Ricci flow as well.
Theorem 2.3 gives , depending on the fixed shrinker, such that
We apply Theorem 2.4, the backward part of Li–Wang’s pseudolocality theorem [13 Theorem 6.21]. This theorem does not require an a priori global curvature bound.
Choose
Fix . If and , then (17) gives
Here lies in , so the point-selected curvature bound applies to this entire ball. Since for large , the rescaled form of (21) gives
Let be the pseudolocality constant. Backward pseudolocality gives a curvature bound on a backward neighborhood of . In particular, this bound holds along the worldline with spatial coordinate for . We apply the theorem separately at every terminal point . Thus the same bound holds on the whole fixed spatial region for this common time interval, proving (3.3). We can take and . The same constants work for every fixed ; only the lower bound on changes. We may in particular assume .
The scalar curvature of a pullback metric is the pullback of the scalar curvature. Constant metric rescaling divides it by the scaling factor. With , we have
The global scalar curvature bound on therefore implies, for ,
On the fixed spatial regions in (19), the curvature bound also bounds and hence controls the variation of the metric for . More precisely, since there, the Ricci flow equation gives
Choose so small that , , and . For , the terminal ball is contained in and is relatively compact by completeness. Hence its backward parabolic neighborhood of radius is contained in the region where both (19) and (22) hold. The choice of depends only on and , and is independent of , , and .
We now apply Proposition 2.5, in the form of Bamler [1 Proposition 3.6], with and , using (22). It gives
and proves (20). The time-domain assumption in that proposition causes no further restriction: is defined on all of , whereas its curvature bound is needed only on the smaller parabolic neighborhood. Also, for large , as required in that proposition. Absorbing the fixed factors and into proves the claimed estimate uniformly at every point of the fixed ball. For , the same estimate follows directly from Chen–Wang [9 Theorem 1.2] after parabolic rescaling.
Proposition 3.3 (A Ricci-flat blow-up limit). Let be a fixed complete noncompact shrinker satisfying (3) and (4). If and , then, for some sequence and ,
in the pointed smooth topology. The limit is complete and Ricci flat, and
Proof. Choose by Lemma 3.1, and use the rescaled flows of Lemma 3.2. At the terminal time, (17) gives on . For large , (21) also gives
since . The curvature and volume bounds on the unit ball give, by the Cheeger–Gromov–Taylor estimate [7], a positive lower bound for the injectivity radius at , independent of . The parabolic curvature bound (19) and local derivative estimates [22] give bounds for all curvature derivatives on every fixed smaller spatial region and on a common smaller backward time interval. Pointed Hamilton compactness gives a smooth limit Ricci flow on that interval. Here we take a convergent subsequence on a fixed pointed ball, then enlarge the radius through positive integers and take a diagonal subsequence. The resulting convergence is smooth on every compact subset, including at terminal time. The limit has complete spatial slices; the controlled terminal radii tend to infinity, and the metric comparison in the proof of Lemma 3.2 holds uniformly on every fixed ball on the common backward interval. By (22), the scalar curvature of the limiting flow is identically zero. Its scalar evolution equation
shows that its Ricci tensor vanishes on the interior of the time interval, and hence also at terminal time by continuity. The Ricci flow equation now gives . Thus the limit is static; write its terminal slice as . Smooth convergence at the basepoint gives .
It remains to verify the direction of the entropy inequality. Let be smooth and compactly supported on , with , and let . Transfer to by a pointed convergence map whose domain contains a neighborhood of . Define on the image of this domain and extend it by zero on . The extension is smooth because vanishes near the boundary of the chosen domain. Put
Smooth convergence of the metrics on the fixed support gives . Thus for all large . The volume forms, gradient terms, and scalar curvature terms converge smoothly on this support. The entropy terms also converge, since extends continuously to zero. Consequently,
Scale invariance of yields
Passing to the limit gives . Since both and were arbitrary, taking the infimum over this full class gives and proves (24). □
Lemma 3.4 (A global parallel direction). The limit in Proposition 3.3 admits a globally defined smooth function satisfying
Consequently,
where is complete, Ricci flat, and nonflat.
Proof. Use the normalization (4) and set outside a compact set. Lemma 2.2, based on [6], shows that is proper, , and the identities (15) hold. In particular, is 1-Lipschitz. Since the selected ball has radius in , it lies outside any fixed compact subset for all sufficiently large . The Lipschitz bound therefore gives
For each fixed and all , the ball is contained in this selected ball. Thus tends uniformly to infinity on every fixed pointed ball in the rescaled metrics.
Put and define
Then , and
locally uniformly. To estimate its Hessian, recall that constant metric rescaling leaves the Levi–Civita connection unchanged and divides the norm of a covariant two-tensor by . In particular, as covariant two-tensors, while . Since and , we obtain
Using the scaling of the Ricci norm, this becomes
where the second line uses (20) with . The convergence is uniform on every fixed pointed ball. In particular, no bound on is needed.
Pull back by the convergence maps in (23). The estimate and bound on each fixed pointed ball. In a fixed coordinate chart on , smooth convergence of the metrics also bounds the first coordinate derivatives of these pulled-back functions. Their second coordinate derivatives satisfy
The right-hand side is uniformly bounded on each compact subset. Thus the first derivatives are locally equicontinuous. Arzelà–Ascoli and a diagonal subsequence give local convergence to a function on all of , with .
Pass the Hessian equation against a compactly supported smooth function in such a chart and passing to the limit, We obtain, in the distributional sense,
The right-hand side is continuous, so the first derivatives are . Repeating this argument with the smooth coefficients of shows that is smooth. Hence classically. Local convergence and (28) also give , proving (25).
Let and . Since is complete and , each integral curve of has speed one and cannot leave every compact subset in finite time. The flow therefore exists for every . Moreover, , so every is an isometry. Along this flow,
Every flow line therefore meets exactly once. The map
is a smooth bijection, with smooth inverse
Its differential sends the coordinate vector in the direction to . Tangent vectors to are perpendicular to , and the flow preserves their inner products. Its pullback metric is therefore , proving the global isometry (26). The hypersurface is closed and totally geodesic, hence complete, and the product curvature formula gives . Finally, cannot be flat, because otherwise would be flat, contrary to . ▫
Entropy bounds and asymptotic volume growth on Ricci-flat manifolds
Throughout this section, denotes the volume of the unit ball in Euclidean . For a complete connected Ricci-flat -manifold and , define
Bishop–Gromov comparison shows that the ratio in (30) is nonincreasing and belongs to . Its limit therefore exists in and is independent of . Indeed, if and , then, for ,
After division by , both outer volume ratios tend to the same limit. Thus changing the centre does not change the asymptotic volume ratio. The entropy is understood as the infimum of the -functional over positive scales and nonnegative, compactly supported smooth test functions of unit norm. It is allowed to equal .
Lemma 4.1 (Entropy and asymptotic volume ratio). Let be a complete connected Ricci-flat manifold. Then
where . In particular, if , then
Proof. Fix , write , and put
For , define the Gaussian normalization
We first prove that
This limit also follows from [10 Lemma 8.10]; we give the details here. The bound implies that is finite and strictly positive. More generally, every Gaussian moment
is finite for and . This follows, for example, by decomposing into the annuli and using the Euclidean upper bound for their volumes. These moment bounds will also justify the computations below. The pushforward of under the distance function is the Stieltjes measure . Radial integration and integration by parts therefore give
The boundary terms vanish: as , and the Gaussian dominates the Euclidean upper volume growth as . The measure
has total mass one. In fact,
The substitution in (35) is useful because this probability measure no longer depends on . Since and for every , dominated convergence yields (34). Moreover, the monotonicity of shows directly from (35) that is nonincreasing as a function of .
Consider the normalized Gaussian test function
Although need not be smooth at the cut locus and does not have compact support, it is admissible by approximation. The distance function is locally Lipschitz, its weak gradient has length one almost everywhere away from , and the cut locus has measure zero. Thus the gradient of is well defined almost everywhere. The Gaussian moment bounds give
For fixed , multiply by a radial Lipschitz cutoff that equals one on , vanishes outside , and satisfies and . Put . Then
For the second assertion, use
The first term tends to zero by integrability of , and the squared norm of the second is at most . For the entropy term, write
The first term converges in by dominated convergence. The absolute integral of the second is bounded by , which tends to zero. Finally, , so replacing by preserves all these limits. Each compactly supported Lipschitz approximation can in turn be approximated uniformly and in by nonnegative compactly supported smooth functions and normalized again. On a fixed compact set, uniform approximation also gives convergence of the entropy integral, using the continuous extension at . Consequently,
Since almost everywhere away from and , direct substitution into the -functional gives
To see the normalization explicitly, , whereas
The two quadratic terms therefore add to the moment in (37).
On each compact interval of positive values, the differentiated integrand in (33) is bounded by a fixed polynomial in times a Gaussian. The moment bounds therefore justify differentiation under the integral sign:
Hence
Since is nonincreasing, (37) gives
Letting and using (34), we obtain
with . In particular, implies . □
Proposition 4.2 (Euclidean product invariance of the volume ratio). Let be a complete connected Ricci-flat manifold, let , and give the product metric . Then
Proof. Fix and write
The product distance satisfies
Indeed, for a path parametrized on , the integral of its squared speed in the product is the sum of the corresponding integrals for its two components. Each component integral is bounded below by the square of the corresponding distance. Conversely, the straight segment in and a minimizing geodesic in , parametrized on the same unit interval with constant speeds, realize this lower bound. Consequently, for fixed with , the section of over is exactly
The volume measure of the product is . Integrating the corresponding ball sections over the Euclidean factor by Fubini’s theorem gives the first equality below. For the second, set , so that , and use the definition of . We obtain
For every , as . Bishop–Gromov comparison gives , so the integrand is dominated by the integrable function .
Dividing (41) by and applying dominated convergence yields
Finally, Fubini’s theorem applied to the Euclidean unit ball in gives
Substitution proves (40), including the case in which both asymptotic volume ratios vanish. □
The proof of Theorem 1.1
We recall the four-dimensional Ricci-flat gap theorem used in the final step.
Proposition 5.1 ([11 Proposition 3.7]). Let be a complete Ricci-flat four-manifold. If
then is isometric to Euclidean .
Proof of Theorem 1.1. If is compact, its curvature is bounded by smoothness. Suppose that is noncompact and . By Proposition 3.3 and Lemma 3.4, a pointed curvature blow-up produces a complete nonflat Ricci-flat manifold with a global product decomposition
The factor is complete and Ricci flat. It is nonflat since the product curvature is that of and .
The compactly supported entropy transfer in Proposition 3.3 and the Gaussian estimate in Lemma 4.1 give
By (2), the left-hand side is strictly greater than . In particular, , so Lemma 4.1 gives positive asymptotic volume ratio. Exponentiating (43), we obtain
Proposition 4.2, with a one-dimensional Euclidean factor, yields
Proposition 5.1 now implies . Consequently is flat, contradicting . Thus the assumption is impossible, and the theorem follows. □
Remark 5.2. The strict entropy inequality is used only in the final volume-ratio gap. The curvature blow-up and the real-line splitting in Section 3 require only the scalar curvature upper bound for the fixed shrinker. The local estimate in Lemma 3.2 provides the Ricci bound needed for the rescaled Hessian calculation.
References
Mathematical Science Research Center, Chongqing University of Technology, Chongqing 400054, China
Email address: [email protected]
School of Mathematical Sciences, Xiamen University, Xiamen 361005, China
Email address: [email protected]
School of Mathematical Sciences, Shanghai Key Laboratory of Pure Mathematics and Mathematical Practice, East China Normal University, Shanghai 200241, China
Email address: [email protected]
School of Science, Zhejiang Sci-Tech University, Hangzhou 310018, China
Email address: [email protected]
References
- [1]R. H. Bamber, Convergence of Ricci flows with bounded scalar curvature, Ann. of Math. (2) 188 (2018), no. 3, 753–831.
- [2]S. Brendle, Rotational symmetry of self-similar solutions to the Ricci flow, Invent. Math. 194 (2013), no. 3, 731–764.
- [3]S. Brendle, Rotational symmetry of Ricci solitons in higher dimensions, J. Differential Geom. 97 (2014), no. 2, 191–214.arxiv.org/abs/1203.0270
- [4]H.-D. Cao, B.-L. Chen, and X.-P. Zhu, Recent developments on Hamilton’s Ricci flow, Surveys in Differential Geometry 12 (2008), 47–112.DOI
- [5]H.-D. Cao and Q. Chen, On Bach-flat gradient shrinking Ricci solitons, Duke Math. J. 162 (2013), no. 6, 1149–1169.DOI
- [6]H.-D. Cao and D. Zhou, On complete gradient shrinking Ricci solitons, J. Differential Geom. 85 (2010), no. 2, 175–185.arxiv.org/abs/0903.3932
- [7]J. Cheeger, M. Gromov, and M. Taylor, Finite propagation speed, kernel estimates for functions of the Laplace operator, and the geometry of complete Riemannian manifolds, J. Differential Geom. 17 (1982), 15–53.DOI
- [8]B.-L. Chen, Strong uniqueness of the Ricci flow, J. Differential Geom. 82 (2009), 363–382.arxiv.org/abs/0706.3081
- [9]X. Chen and B. Wang, On the conditions to extend Ricci flow (III), Int. Math. Res. Not. IMRN 2013 (2013), no. 10, 2349–2367. doi:10.1093/imrn/rns117.DOI
- [10]B. Chow, S.-C. Chu, D. Glickenstein, C. Guenther, J. Isenberg, T. Ivey, D. Knopf, P. Lu, F. Luo, and L. Ni, The Ricci flow: techniques and applications. Part I. Geometric aspects, Mathematical Surveys and Monographs, vol. 135, American Mathematical Society, Providence, RI, 2007.
- [11]S. Honda and A. Mondino, Gap phenomena under curvature restrictions, Indag. Math. 37 (2026), no. 3, 744–763; arXiv:2410.04985.arxiv.org/abs/2410.04985
- [12]Y. Li and B. Wang, Heat kernel on Ricci shrinkers, Calc. Var. Partial Differential Equations 59 (2020), no. 6, Paper No. 194, 84 pp.
- [13]Y. Li and B. Wang, Heat kernel on Ricci shrinkers (II), Acta Math. Sci. Ser. B (Engl. Ed.) 44 (2024), no. 5, 1639–1695.arxiv.org/abs/2301.08430
- [14]O. Munteanu and J. P. Wang, Geometry of shrinking Ricci solitons, Compos. Math. 151 (2015), no. 12, 2273–2300.DOI
- [15]A. Naber, Noncompact shrinking four solitons with nonnegative curvature, J. Reine Angew. Math. 645 (2010), 125–153.DOI
- [16]L. Ni and N. Wallach, On a classification of gradient shrinking solitons, Math. Res. Lett. 15 (2008), no. 5, 941–955.DOI
- [17]G. Perelman, The entropy formula for the Ricci flow and its geometric applications, arXiv:math/0211159, 2002.
- [18]G. Perelman, Ricci flow with surgery on three-manifolds, arXiv:math/0303109, 2003.DOI
- [19]P. Petersen and W. Wylie, Rigidity of gradient Ricci solitons, Pacific J. Math. 241 (2009), no. 2, 329–345.arxiv.org/abs/0710.3174
- [20]P. Petersen and W. Wylie, On the classification of gradient Ricci solitons, Geom. Topol. 14 (2010), no. 4, 2277–2300.
- [22]W.-X. Shi, Deforming the metric on complete Riemannian manifolds, J. Differential Geom. 30 (1989), 223–301.DOI
- [23]B. Wang, The local entropy along Ricci flow—Part A: the no-local-collapsing theorems, Camb. J. Math. 6 (2018), no. 3, 267–346.arxiv.org/abs/1706.08485
- [24]J.-Y. Wu, P. Wu, and W. Wylie, Gradient shrinking Ricci solitons of half harmonic Weyl curvature, Calc. Var. Partial Differential Equations 57 (2018), no. 5, Art. 141, 15 pp.; correction, ibid. 60 (2021), Art. 76. doi:10.1007/s00526-020-01892-5.
- [25]Z. H. Zhang, Gradient shrinking solitons with vanishing Weyl tensor, Pacific J. Math. 242 (2009), no. 1, 189–200.arxiv.org/abs/0807.1582